| Age | Commit message (Collapse) | Author |
|---|
|
Fix invalid dereferencing of indirect CCW data pointer in
dasd_eckd_dump_sense() that leads to a kernel panic in error cases.
When using indirect addressing for DASD CCWs (IDAW) the CCW CDA pointer
does not contain the data address itself but a pointer to the IDAL.
This needs to be translated from physical to virtual as well before
using it.
This dereferencing is also used for dasd_page_cache and also fixed
although it is very unlikely that this code path ever gets used.
Fixes: c0bd39601c13 ("s390/dasd: use new address translation helpers")
Cc: stable@vger.kernel.org
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
In the match() callback, the struct device_driver * should not be
changed, so change the function callback to be a const *. This is one
step of many towards making the driver core safe to have struct
device_driver in read-only memory.
Because the match() callback is in all busses, all busses are modified
to handle this properly. This does entail switching some container_of()
calls to container_of_const() to properly handle the constant *.
For some busses, like PCI and USB and HV, the const * is cast away in
the match callback as those busses do want to modify those structures at
this point in time (they have a local lock in the driver structure.)
That will have to be changed in the future if they wish to have their
struct device * in read-only-memory.
Cc: Rafael J. Wysocki <rafael@kernel.org>
Reviewed-by: Alex Elder <elder@kernel.org>
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Link: https://lore.kernel.org/r/2024070136-wrongdoer-busily-01e8@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The processing of a Transfer-In-Channel (TIC) CCW requires locating
the target of the CCW in the channel program, and updating the
address to reflect what will actually be sent to hardware.
An error exists where the 64-bit virtual address is truncated to
32-bits (variable "cda") when performing this math. Since s390
addresses of that size are 31-bits, this leaves that additional
bit enabled such that the resulting I/O triggers a channel
program check. This shows up occasionally when booting a KVM
guest from a passthrough DASD device:
..snip...
Interrupt Response Block Data:
: 0x0000000000003990
Function Ctrl : [Start]
Activity Ctrl :
Status Ctrl : [Alert] [Primary] [Secondary] [Status-Pending]
Device Status :
Channel Status : [Program-Check]
cpa=: 0x00000000008d0018
prev_ccw=: 0x0000000000000000
this_ccw=: 0x0000000000000000
...snip...
dasd-ipl: Failed to run IPL1 channel program
The channel program address of "0x008d0018" in the IRB doesn't
look wrong, but tracing the CCWs shows the offending bit enabled:
ccw=0x0000012e808d0000 cda=00a0b030
ccw=0x0000012e808d0008 cda=00a0b038
ccw=0x0000012e808d0010 cda=808d0008
ccw=0x0000012e808d0018 cda=00a0b040
Fix the calculation of the TIC CCW's data address such that it points
to a valid 31-bit address regardless of the input address.
Fixes: bd36cfbbb9e1 ("s390/vfio_ccw_cp: use new address translation helpers")
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://lore.kernel.org/r/20240628163738.3643513-1-farman@linux.ibm.com
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Due to a bug in some firmware versions, Store Data requests might not
get an event response in certain situations. As a result, the boot
process will be blocked indefinitely.
Fix this by introducing timeout handling for Store Data requests. In
case a timeout occurs, the Store Data operation is halted and no data
is retrieved from the SCLP facility.
Note: A minority of installed systems rely on Store Data result for
device auto-configuration. These systems will fail to boot in case of a
Store Data timeout and will need to be switched to manual device
configuration as workaround.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
When a task waiting for completion of a Store Data operation is
interrupted, an attempt is made to halt this operation. If this attempt
fails due to a hardware or firmware problem, there is a chance that the
SCLP facility might store data into buffers referenced by the original
operation at a later time.
Handle this situation by not releasing the referenced data buffers if
the halt attempt fails. For current use cases, this might result in a
leak of few pages of memory in case of a rare hardware/firmware
malfunction.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
On systems that do not support Store Data events (such as when running
as KVM guest) the following warning message appears during boot:
sclp_sd: Store Data request failed (eq=2, di=3, response=0x40f0,
flags=0x00, status=0, rc=-5)
This warning does not add any useful information since the result is
expected due to missing support for that event type.
Suppress this message by checking the associated masks of supported
events before issuing a Store Data event.
Suggested-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
With ARCH=s390, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/s390/char/raw3270.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/s390/char/con3270.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/s390/char/fs3270.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240615-md-s390-drivers-s390-char-v1-1-d1cd23ff6476@quicinc.com
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
With ARCH=s390, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/s390/block/dcssblk.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240615-md-s390-drivers-s390-block-dcssblk-v1-1-d9d19703abcb@quicinc.com
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
With ARCH=s390, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/s390/net/lcs.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Acked-by: Alexandra Winter <wintera@linux.ibm.com>
Link: https://patch.msgid.link/20240625-md-s390-drivers-s390-net-v2-1-5a8a2b2f2ae3@quicinc.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If sclp_init() fails it only partially cleans up: if there are multiple
failing calls to sclp_init() sclp_state_change_event will be added several
times to sclp_reg_list, which results in the following warning:
------------[ cut here ]------------
list_add double add: new=000003ffe1598c10, prev=000003ffe1598bf0, next=000003ffe1598c10.
WARNING: CPU: 0 PID: 1 at lib/list_debug.c:35 __list_add_valid_or_report+0xde/0xf8
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.10.0-rc3
Krnl PSW : 0404c00180000000 000003ffe0d6076a (__list_add_valid_or_report+0xe2/0xf8)
R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:3 CC:0 PM:0 RI:0 EA:3
...
Call Trace:
[<000003ffe0d6076a>] __list_add_valid_or_report+0xe2/0xf8
([<000003ffe0d60766>] __list_add_valid_or_report+0xde/0xf8)
[<000003ffe0a8d37e>] sclp_init+0x40e/0x450
[<000003ffe00009f2>] do_one_initcall+0x42/0x1e0
[<000003ffe15b77a6>] do_initcalls+0x126/0x150
[<000003ffe15b7a0a>] kernel_init_freeable+0x1ba/0x1f8
[<000003ffe0d6650e>] kernel_init+0x2e/0x180
[<000003ffe000301c>] __ret_from_fork+0x3c/0x60
[<000003ffe0d759ca>] ret_from_fork+0xa/0x30
Fix this by removing sclp_state_change_event from sclp_reg_list when
sclp_init() fails.
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Move the dax flag into the queue_limits feature field so that it can be
set atomically with the queue frozen.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20240617060532.127975-21-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Move the add_random flag into the queue_limits feature field so that it
can be set atomically with the queue frozen.
Note that this also removes code from dm to clear the flag based on
the underlying devices, which can't be reached as dm devices will
always start out without the flag set.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20240617060532.127975-16-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Move the nonrot flag into the queue_limits feature field so that it can
be set atomically with the queue frozen.
Use the chance to switch to defaulting to non-rotational and require
the driver to opt into rotational, which matches the polarity of the
sysfs interface.
For the z2ram, ps3vram, 2x memstick, ubiblock and dcssblk the new
rotational flag is not set as they clearly are not rotational despite
this being a behavior change. There are some other drivers that
unconditionally set the rotational flag to keep the existing behavior
as they arguably can be used on rotational devices even if that is
probably not their main use today (e.g. virtio_blk and drbd).
The flag is automatically inherited in blk_stack_limits matching the
existing behavior in dm and md.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20240617060532.127975-15-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Replace immediate values with SCLP_CMDW_UN|ASSIGN_STORAGE defines.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://lore.kernel.org/r/20240610151048.2548428-1-agordeev@linux.ibm.com
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Replace all S390_lowcore usages in drivers/s390 by get_lowcore().
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Commit e3e9bda38e6d ("s390/virtio_ccw: use DMA handle from DMA API")
broke configuration change notifications for virtio-ccw by putting the
DMA address of *indicatorp directly into ccw->cda disregarding the fact
that if !!(vcdev->is_thinint) then the function
virtio_ccw_register_adapter_ind() will overwrite that ccw->cda value
with the address of the virtio_thinint_area so it can actually set up
the adapter interrupts via CCW_CMD_SET_IND_ADAPTER. Thus we end up
pointing to the wrong object for both CCW_CMD_SET_IND if setting up the
adapter interrupts fails, and for CCW_CMD_SET_CONF_IND regardless
whether it succeeds or fails.
To fix this, let us save away the dma address of *indicatorp in a local
variable, and copy it to ccw->cda after the "vcdev->is_thinint" branch.
Fixes: e3e9bda38e6d ("s390/virtio_ccw: use DMA handle from DMA API")
Reported-by: Boqiao Fu <bfu@redhat.com>
Reported-by: Sebastian Mitterle <smitterl@redhat.com>
Closes: https://issues.redhat.com/browse/RHEL-39983
Tested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Link: https://lore.kernel.org/r/20240611214716.1002781-1-pasic@linux.ibm.com
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Alexander Gordeev:
- Switch read and write software bits for PUDs
- Add missing hardware bits for PUDs and PMDs
- Generate unwind information for C modules to fix GDB unwind error for
vDSO functions
- Create .build-id links for unstripped vDSO files to enable vDSO
debugging with symbols
- Use standard stack frame layout for vDSO generated stack frames to
manually walk stack frames without DWARF information
- Rework perf_callchain_user() and arch_stack_walk_user() functions to
reduce code duplication
- Skip first stack frame when walking user stack
- Add basic checks to identify invalid instruction pointers when
walking stack frames
- Introduce and use struct stack_frame_vdso_wrapper within vDSO user
wrapper code to automatically generate an asm-offset define. Also use
STACK_FRAME_USER_OVERHEAD instead of STACK_FRAME_OVERHEAD to document
that the code works with user space stack
- Clear the backchain of the extra stack frame added by the vDSO user
wrapper code. This allows the user stack walker to detect and skip
the non-standard stack frame. Without this an incorrect instruction
pointer would be added to stack traces.
- Rewrite psw_idle() function in C to ease maintenance and further
enhancements
- Remove get_vtimer() function and use get_cpu_timer() instead
- Mark psw variable in __load_psw_mask() as __unitialized to avoid
superfluous clearing of PSW
- Remove obsolete and superfluous comment about removed TIF_FPU flag
- Replace memzero_explicit() and kfree() with kfree_sensitive() to fix
warnings reported by Coccinelle
- Wipe sensitive data and all copies of protected- or secure-keys from
stack when an IOCTL fails
- Both do_airq_interrupt() and do_io_interrupt() functions set
CIF_NOHZ_DELAY flag. Move it in do_io_irq() to simplify the code
- Provide iucv_alloc_device() and iucv_release_device() helpers, which
can be used to deduplicate more or less identical IUCV device
allocation and release code in four different drivers
- Make use of iucv_alloc_device() and iucv_release_device() helpers to
get rid of quite some code and also remove a cast to an incompatible
function (clang W=1)
- There is no user of iucv_root outside of the core IUCV code left.
Therefore remove the EXPORT_SYMBOL
- __apply_alternatives() contains a runtime check which verifies that
the size of the to be patched code area is even. Convert this to a
compile time check
- Increase size of buffers for sending z/VM CP DIAGNOSE X'008' commands
from 128 to 240
- Do not accept z/VM CP DIAGNOSE X'008' commands longer than maximally
allowed
- Use correct defines IPL_BP_NVME_LEN and IPL_BP0_NVME_LEN instead of
IPL_BP_FCP_LEN and IPL_BP0_FCP_LEN ones to initialize NVMe reIPL
block on 'scp_data' sysfs attribute update
- Initialize the correct fields of the NVMe dump block, which were
confused with FCP fields
- Refactor macros for 'scp_data' (re-)IPL sysfs attribute to reduce
code duplication
- Introduce 'scp_data' sysfs attribute for dump IPL to allow tools such
as dumpconf passing additional kernel command line parameters to a
stand-alone dumper
- Rework the CPACF query functions to use the correct RRE or RRF
instruction formats and set instruction register fields correctly
- Instead of calling BUG() at runtime force a link error during compile
when a unsupported opcode is used with __cpacf_query() or
__cpacf_check_opcode() functions
- Fix a crash in ap_parse_bitmap_str() function on /sys/bus/ap/apmask
or /sys/bus/ap/aqmask sysfs file update with a relative mask value
- Fix "bindings complete" udev event which should be sent once all AP
devices have been bound to device drivers and again when unbind/bind
actions take place and all AP devices are bound again
- Facility list alt_stfle_fac_list is nowhere used in the decompressor,
therefore remove it there
- Remove custom kprobes insn slot allocator in favour of the standard
module_alloc() one, since kernel image and module areas are located
within 4GB
- Use kvcalloc() instead of kvmalloc_array() in zcrypt driver to avoid
calling memset() with a large byte count and get rid of the sparse
warning as result
* tag 's390-6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (39 commits)
s390/zcrypt: Use kvcalloc() instead of kvmalloc_array()
s390/kprobes: Remove custom insn slot allocator
s390/boot: Remove alt_stfle_fac_list from decompressor
s390/ap: Fix bind complete udev event sent after each AP bus scan
s390/ap: Fix crash in AP internal function modify_bitmap()
s390/cpacf: Make use of invalid opcode produce a link error
s390/cpacf: Split and rework cpacf query functions
s390/ipl: Introduce sysfs attribute 'scp_data' for dump ipl
s390/ipl: Introduce macros for (re)ipl sysfs attribute 'scp_data'
s390/ipl: Fix incorrect initialization of nvme dump block
s390/ipl: Fix incorrect initialization of len fields in nvme reipl block
s390/ipl: Do not accept z/VM CP diag X'008' cmds longer than max length
s390/ipl: Fix size of vmcmd buffers for sending z/VM CP diag X'008' cmds
s390/alternatives: Convert runtime sanity check into compile time check
s390/iucv: Unexport iucv_root
tty: hvc-iucv: Make use of iucv_alloc_device()
s390/smsgiucv_app: Make use of iucv_alloc_device()
s390/netiucv: Make use of iucv_alloc_device()
s390/vmlogrdr: Make use of iucv_alloc_device()
s390/iucv: Provide iucv_alloc_device() / iucv_release_device()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull bdev bd_inode updates from Al Viro:
"Replacement of bdev->bd_inode with sane(r) set of primitives by me and
Yu Kuai"
* tag 'pull-bd_inode-1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
RIP ->bd_inode
dasd_format(): killing the last remaining user of ->bd_inode
nilfs_attach_log_writer(): use ->bd_mapping->host instead of ->bd_inode
block/bdev.c: use the knowledge of inode/bdev coallocation
gfs2: more obvious initializations of mapping->host
fs/buffer.c: massage the remaining users of ->bd_inode to ->bd_mapping
blk_ioctl_{discard,zeroout}(): we only want ->bd_inode->i_mapping here...
grow_dev_folio(): we only want ->bd_inode->i_mapping there
use ->bd_mapping instead of ->bd_inode->i_mapping
block_device: add a pointer to struct address_space (page cache of bdev)
missing helpers: bdev_unhash(), bdev_drop()
block: move two helpers into bdev.c
block2mtd: prevent direct access of bd_inode
dm-vdo: use bdev_nr_bytes(bdev) instead of i_size_read(bdev->bd_inode)
blkdev_write_iter(): saner way to get inode and bdev
bcachefs: remove dead function bdev_sectors()
ext4: remove block_device_ejected()
erofs_buf: store address_space instead of inode
erofs: switch erofs_bread() to passing offset instead of block number
|
|
sparse warns about a large memset() call within
zcrypt_device_status_mask_ext():
drivers/s390/crypto/zcrypt_api.c:1303:15: warning: memset with byte count of 262144
Get rid of this warning by making sure that all callers of this function
allocate memory with __GFP_ZERO, which zeroes memory already at allocation
time, which again allows to remove the memset() call.
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
With the mentioned commit (see the fixes tag) on every AP bus scan an
uevent "AP bus change bindings complete" is emitted. Furthermore if an AP
device switched from one driver to another, for example by manipulating the
apmask, there was never a "bindings complete" uevent generated.
The "bindings complete" event should be sent once when all AP devices have
been bound to device drivers and again if unbind/bind actions take place
and finally all AP devices are bound again. Therefore implement this.
Fixes: 778412ab915d ("s390/ap: rearm APQNs bindings complete completion")
Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
A system crash like this
Failing address: 200000cb7df6f000 TEID: 200000cb7df6f403
Fault in home space mode while using kernel ASCE.
AS:00000002d71bc007 R3:00000003fe5b8007 S:000000011a446000 P:000000015660c13d
Oops: 0038 ilc:3 [#1] PREEMPT SMP
Modules linked in: mlx5_ib ...
CPU: 8 PID: 7556 Comm: bash Not tainted 6.9.0-rc7 #8
Hardware name: IBM 3931 A01 704 (LPAR)
Krnl PSW : 0704e00180000000 0000014b75e7b606 (ap_parse_bitmap_str+0x10e/0x1f8)
R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:2 PM:0 RI:0 EA:3
Krnl GPRS: 0000000000000001 ffffffffffffffc0 0000000000000001 00000048f96b75d3
000000cb00000100 ffffffffffffffff ffffffffffffffff 000000cb7df6fce0
000000cb7df6fce0 00000000ffffffff 000000000000002b 00000048ffffffff
000003ff9b2dbc80 200000cb7df6fcd8 0000014bffffffc0 000000cb7df6fbc8
Krnl Code: 0000014b75e7b5fc: a7840047 brc 8,0000014b75e7b68a
0000014b75e7b600: 18b2 lr %r11,%r2
#0000014b75e7b602: a7f4000a brc 15,0000014b75e7b616
>0000014b75e7b606: eb22d00000e6 laog %r2,%r2,0(%r13)
0000014b75e7b60c: a7680001 lhi %r6,1
0000014b75e7b610: 187b lr %r7,%r11
0000014b75e7b612: 84960021 brxh %r9,%r6,0000014b75e7b654
0000014b75e7b616: 18e9 lr %r14,%r9
Call Trace:
[<0000014b75e7b606>] ap_parse_bitmap_str+0x10e/0x1f8
([<0000014b75e7b5dc>] ap_parse_bitmap_str+0xe4/0x1f8)
[<0000014b75e7b758>] apmask_store+0x68/0x140
[<0000014b75679196>] kernfs_fop_write_iter+0x14e/0x1e8
[<0000014b75598524>] vfs_write+0x1b4/0x448
[<0000014b7559894c>] ksys_write+0x74/0x100
[<0000014b7618a440>] __do_syscall+0x268/0x328
[<0000014b761a3558>] system_call+0x70/0x98
INFO: lockdep is turned off.
Last Breaking-Event-Address:
[<0000014b75e7b636>] ap_parse_bitmap_str+0x13e/0x1f8
Kernel panic - not syncing: Fatal exception: panic_on_oops
occured when /sys/bus/ap/a[pq]mask was updated with a relative mask value
(like +0x10-0x12,+60,-90) with one of the numeric values exceeding INT_MAX.
The fix is simple: use unsigned long values for the internal variables. The
correct checks are already in place in the function but a simple int for
the internal variables was used with the possibility to overflow.
Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Tested-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Complete rework of garbage collection of AF_UNIX sockets.
AF_UNIX is prone to forming reference count cycles due to fd
passing functionality. New method based on Tarjan's Strongly
Connected Components algorithm should be both faster and remove a
lot of workarounds we accumulated over the years.
- Add TCP fraglist GRO support, allowing chaining multiple TCP
packets and forwarding them together. Useful for small switches /
routers which lack basic checksum offload in some scenarios (e.g.
PPPoE).
- Support using SMP threads for handling packet backlog i.e. packet
processing from software interfaces and old drivers which don't use
NAPI. This helps move the processing out of the softirq jumble.
- Continue work of converting from rtnl lock to RCU protection.
Don't require rtnl lock when reading: IPv6 routing FIB, IPv6
address labels, netdev threaded NAPI sysfs files, bonding driver's
sysfs files, MPLS devconf, IPv4 FIB rules, netns IDs, tcp metrics,
TC Qdiscs, neighbor entries, ARP entries via ioctl(SIOCGARP), a lot
of the link information available via rtnetlink.
- Small optimizations from Eric to UDP wake up handling, memory
accounting, RPS/RFS implementation, TCP packet sizing etc.
- Allow direct page recycling in the bulk API used by XDP, for +2%
PPS.
- Support peek with an offset on TCP sockets.
- Add MPTCP APIs for querying last time packets were received/sent/acked
and whether MPTCP "upgrade" succeeded on a TCP socket.
- Add intra-node communication shortcut to improve SMC performance.
- Add IPv6 (and IPv{4,6}-over-IPv{4,6}) support to the GTP protocol
driver.
- Add HSR-SAN (RedBOX) mode of operation to the HSR protocol driver.
- Add reset reasons for tracing what caused a TCP reset to be sent.
- Introduce direction attribute for xfrm (IPSec) states. State can be
used either for input or output packet processing.
Things we sprinkled into general kernel code:
- Add bitmap_{read,write}(), bitmap_size(), expose BYTES_TO_BITS().
This required touch-ups and renaming of a few existing users.
- Add Endian-dependent __counted_by_{le,be} annotations.
- Make building selftests "quieter" by printing summaries like
"CC object.o" rather than full commands with all the arguments.
Netfilter:
- Use GFP_KERNEL to clone elements, to deal better with OOM
situations and avoid failures in the .commit step.
BPF:
- Add eBPF JIT for ARCv2 CPUs.
- Support attaching kprobe BPF programs through kprobe_multi link in
a session mode, meaning, a BPF program is attached to both function
entry and return, the entry program can decide if the return
program gets executed and the entry program can share u64 cookie
value with return program. "Session mode" is a common use-case for
tetragon and bpftrace.
- Add the ability to specify and retrieve BPF cookie for raw
tracepoint programs in order to ease migration from classic to raw
tracepoints.
- Add an internal-only BPF per-CPU instruction for resolving per-CPU
memory addresses and implement support in x86, ARM64 and RISC-V
JITs. This allows inlining functions which need to access per-CPU
state.
- Optimize x86 BPF JIT's emit_mov_imm64, and add support for various
atomics in bpf_arena which can be JITed as a single x86
instruction. Support BPF arena on ARM64.
- Add a new bpf_wq API for deferring events and refactor
process-context bpf_timer code to keep common code where possible.
- Harden the BPF verifier's and/or/xor value tracking.
- Introduce crypto kfuncs to let BPF programs call kernel crypto
APIs.
- Support bpf_tail_call_static() helper for BPF programs with GCC 13.
- Add bpf_preempt_{disable,enable}() kfuncs in order to allow a BPF
program to have code sections where preemption is disabled.
Driver API:
- Skip software TC processing completely if all installed rules are
marked as HW-only, instead of checking the HW-only flag rule by
rule.
- Add support for configuring PoE (Power over Ethernet), similar to
the already existing support for PoDL (Power over Data Line)
config.
- Initial bits of a queue control API, for now allowing a single
queue to be reset without disturbing packet flow to other queues.
- Common (ethtool) statistics for hardware timestamping.
Tests and tooling:
- Remove the need to create a config file to run the net forwarding
tests so that a naive "make run_tests" can exercise them.
- Define a method of writing tests which require an external endpoint
to communicate with (to send/receive data towards the test
machine). Add a few such tests.
- Create a shared code library for writing Python tests. Expose the
YAML Netlink library from tools/ to the tests for easy Netlink
access.
- Move netfilter tests under net/, extend them, separate performance
tests from correctness tests, and iron out issues found by running
them "on every commit".
- Refactor BPF selftests to use common network helpers.
- Further work filling in YAML definitions of Netlink messages for:
nftables, team driver, bonding interfaces, vlan interfaces, VF
info, TC u32 mark, TC police action.
- Teach Python YAML Netlink to decode attribute policies.
- Extend the definition of the "indexed array" construct in the specs
to cover arrays of scalars rather than just nests.
- Add hyperlinks between definitions in generated Netlink docs.
Drivers:
- Make sure unsupported flower control flags are rejected by drivers,
and make more drivers report errors directly to the application
rather than dmesg (large number of driver changes from Asbjørn
Sloth Tønnesen).
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support multiple RSS contexts and steering traffic to them
- support XDP metadata
- make page pool allocations more NUMA aware
- Intel (100G, ice, idpf):
- extract datapath code common among Intel drivers into a library
- use fewer resources in switchdev by sharing queues with the PF
- add PFCP filter support
- add Ethernet filter support
- use a spinlock instead of HW lock in PTP clock ops
- support 5 layer Tx scheduler topology
- nVidia/Mellanox:
- 800G link modes and 100G SerDes speeds
- per-queue IRQ coalescing configuration
- Marvell Octeon:
- support offloading TC packet mark action
- Ethernet NICs consumer, embedded and virtual:
- stop lying about skb->truesize in USB Ethernet drivers, it
messes up TCP memory calculations
- Google cloud vNIC:
- support changing ring size via ethtool
- support ring reset using the queue control API
- VirtIO net:
- expose flow hash from RSS to XDP
- per-queue statistics
- add selftests
- Synopsys (stmmac):
- support controllers which require an RX clock signal from the
MII bus to perform their hardware initialization
- TI:
- icssg_prueth: support ICSSG-based Ethernet on AM65x SR1.0 devices
- icssg_prueth: add SW TX / RX Coalescing based on hrtimers
- cpsw: minimal XDP support
- Renesas (ravb):
- support describing the MDIO bus
- Realtek (r8169):
- add support for RTL8168M
- Microchip Sparx5:
- matchall and flower actions mirred and redirect
- Ethernet switches:
- nVidia/Mellanox:
- improve events processing performance
- Marvell:
- add support for MV88E6250 family internal PHYs
- Microchip:
- add DCB and DSCP mapping support for KSZ switches
- vsc73xx: convert to PHYLINK
- Realtek:
- rtl8226b/rtl8221b: add C45 instances and SerDes switching
- Many driver changes related to PHYLIB and PHYLINK deprecated API
cleanup
- Ethernet PHYs:
- Add a new driver for Airoha EN8811H 2.5 Gigabit PHY.
- micrel: lan8814: add support for PPS out and external timestamp trigger
- WiFi:
- Disable Wireless Extensions (WEXT) in all Wi-Fi 7 devices
drivers. Modern devices can only be configured using nl80211.
- mac80211/cfg80211
- handle color change per link for WiFi 7 Multi-Link Operation
- Intel (iwlwifi):
- don't support puncturing in 5 GHz
- support monitor mode on passive channels
- BZ-W device support
- P2P with HE/EHT support
- re-add support for firmware API 90
- provide channel survey information for Automatic Channel Selection
- MediaTek (mt76):
- mt7921 LED control
- mt7925 EHT radiotap support
- mt7920e PCI support
- Qualcomm (ath11k):
- P2P support for QCA6390, WCN6855 and QCA2066
- support hibernation
- ieee80211-freq-limit Device Tree property support
- Qualcomm (ath12k):
- refactoring in preparation of multi-link support
- suspend and hibernation support
- ACPI support
- debugfs support, including dfs_simulate_radar support
- RealTek:
- rtw88: RTL8723CS SDIO device support
- rtw89: RTL8922AE Wi-Fi 7 PCI device support
- rtw89: complete features of new WiFi 7 chip 8922AE including
BT-coexistence and Wake-on-WLAN
- rtw89: use BIOS ACPI settings to set TX power and channels
- rtl8xxxu: enable Management Frame Protection (MFP) support
- Bluetooth:
- support for Intel BlazarI and Filmore Peak2 (BE201)
- support for MediaTek MT7921S SDIO
- initial support for Intel PCIe BT driver
- remove HCI_AMP support"
* tag 'net-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1827 commits)
selftests: netfilter: fix packetdrill conntrack testcase
net: gro: fix napi_gro_cb zeroed alignment
Bluetooth: btintel_pcie: Refactor and code cleanup
Bluetooth: btintel_pcie: Fix warning reported by sparse
Bluetooth: hci_core: Fix not handling hdev->le_num_of_adv_sets=1
Bluetooth: btintel: Fix compiler warning for multi_v7_defconfig config
Bluetooth: btintel_pcie: Fix compiler warnings
Bluetooth: btintel_pcie: Add *setup* function to download firmware
Bluetooth: btintel_pcie: Add support for PCIe transport
Bluetooth: btintel: Export few static functions
Bluetooth: HCI: Remove HCI_AMP support
Bluetooth: L2CAP: Fix div-by-zero in l2cap_le_flowctl_init()
Bluetooth: qca: Fix error code in qca_read_fw_build_info()
Bluetooth: hci_conn: Use __counted_by() and avoid -Wfamnae warning
Bluetooth: btintel: Add support for Filmore Peak2 (BE201)
Bluetooth: btintel: Add support for BlazarI
LE Create Connection command timeout increased to 20 secs
dt-bindings: net: bluetooth: Add MediaTek MT7921S SDIO Bluetooth
Bluetooth: compute LE flow credits based on recvbuf space
Bluetooth: hci_sync: Use cmd->num_cis instead of magic number
...
|
|
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (ufs, lpfc, qla2xxx, mpi3mr, libsas).
The major update (which causes a conflict with block, see below) is
Christoph removing the queue limits and their associated block
helpers.
The remaining patches are assorted minor fixes and deprecated function
updates plus a bit of constification"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (141 commits)
scsi: mpi3mr: Sanitise num_phys
scsi: lpfc: Copyright updates for 14.4.0.2 patches
scsi: lpfc: Update lpfc version to 14.4.0.2
scsi: lpfc: Add support for 32 byte CDBs
scsi: lpfc: Change lpfc_hba hba_flag member into a bitmask
scsi: lpfc: Introduce rrq_list_lock to protect active_rrq_list
scsi: lpfc: Clear deferred RSCN processing flag when driver is unloading
scsi: lpfc: Update logging of protection type for T10 DIF I/O
scsi: lpfc: Change default logging level for unsolicited CT MIB commands
scsi: target: Remove unused list 'device_list'
scsi: iscsi: Remove unused list 'connlist_err'
scsi: ufs: exynos: Add support for Tensor gs101 SoC
scsi: ufs: exynos: Add some pa_dbg_ register offsets into drvdata
scsi: ufs: exynos: Allow max frequencies up to 267Mhz
scsi: ufs: exynos: Add EXYNOS_UFS_OPT_TIMER_TICK_SELECT option
scsi: ufs: exynos: Add EXYNOS_UFS_OPT_UFSPR_SECURE option
scsi: ufs: dt-bindings: exynos: Add gs101 compatible
scsi: qla2xxx: Fix debugfs output for fw_resource_count
scsi: qedf: Ensure the copied buf is NUL terminated
scsi: bfa: Ensure the copied buf is NUL terminated
...
|
|
Make use of iucv_alloc_device() to get rid of quite some code. In addition
this also removes a cast to an incompatible function (clang W=1):
drivers/s390/net/smsgiucv_app.c:176:26: error: cast from 'void (*)(const void *)' to 'void (*)(struct device *)' converts to incompatible function type [-Werror,-Wcast-function-type-strict]
176 | smsg_app_dev->release = (void (*)(struct device *)) kfree;
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Reported-by: Nathan Chancellor <nathan@kernel.org>
Closes: https://lore.kernel.org/r/20240417-s390-drivers-fix-cast-function-type-v1-2-fd048c9903b0@kernel.org
Acked-by: Alexandra Winter <wintera@linux.ibm.com>
Link: https://lore.kernel.org/r/20240506194454.1160315-5-hca@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Make use of iucv_alloc_device() to get rid of quite some code. In addition
this also removes a cast to an incompatible function (clang W=1):
drivers/s390/net/netiucv.c:1716:18: error: cast from 'void (*)(const void *)' to 'void (*)(struct device *)' converts to incompatible function type [-Werror,-Wcast-function-type-strict]
1716 | dev->release = (void (*)(struct device *))kfree;
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Reported-by: Nathan Chancellor <nathan@kernel.org>
Closes: https://lore.kernel.org/r/20240417-s390-drivers-fix-cast-function-type-v1-3-fd048c9903b0@kernel.org
Acked-by: Alexandra Winter <wintera@linux.ibm.com>
Link: https://lore.kernel.org/r/20240506194454.1160315-4-hca@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Make use of iucv_alloc_device() to get rid of quite some code. In addition
this also removes a cast to an incompatible function (clang W=1):
drivers/s390/char/vmlogrdr.c:746:18: error: cast from 'void (*)(const void *)' to 'void (*)(struct device *)' converts to incompatible function type [-Werror,-Wcast-function-type-strict]
746 | dev->release = (void (*)(struct device *))kfree;
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Reported-by: Nathan Chancellor <nathan@kernel.org>
Closes: https://lore.kernel.org/r/20240417-s390-drivers-fix-cast-function-type-v1-1-fd048c9903b0@kernel.org
Acked-by: Alexandra Winter <wintera@linux.ibm.com>
Link: https://lore.kernel.org/r/20240506194454.1160315-3-hca@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Both do_airq_interrupt() and do_io_interrupt() set
CIF_NOHZ_DELAY. Move it to do_io_irq() to simplify
the code.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Although the clear-key of neither protected- nor secure-keys is
accessible, this key material should only be visible to the calling
process. So wipe all copies of protected- or secure-keys from stack,
even in case of an error.
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Wipe all sensitive data from stack for all IOCTLs, which convert a
clear-key into a protected- or secure-key.
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Wipe sensitive data from stack also if the copy_to_user() fails.
Suggested-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Replace memzero_explicit() and kfree() with kfree_sensitive() to fix
warnings reported by Coccinelle:
WARNING opportunity for kfree_sensitive/kvfree_sensitive (line 1506)
WARNING opportunity for kfree_sensitive/kvfree_sensitive (line 1643)
WARNING opportunity for kfree_sensitive/kvfree_sensitive (line 1770)
Signed-off-by: Jules Irenge <jbi.octave@gmail.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Link: https://lore.kernel.org/r/ZjqZkNi_JUJu73Rg@octinomon.home
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Alexander Gordeev:
- Store AP Query Configuration Information in a static buffer
- Rework the AP initialization and add missing cleanups to the error
path
- Swap IRQ and AP bus/device registration to avoid race conditions
- Export prot_virt_guest symbol
- Introduce AP configuration changes notifier interface to facilitate
modularization of the AP bus
- Add CONFIG_AP kernel configuration option to allow modularization of
the AP bus
- Rework CONFIG_ZCRYPT_DEBUG kernel configuration option description
and dependency and rename it to CONFIG_AP_DEBUG
- Convert sprintf() and snprintf() to sysfs_emit() in CIO code
- Adjust indentation of RELOCS command build step
- Make crypto performance counters upward compatible
- Convert make_page_secure() and gmap_make_secure() to use folio
- Rework channel-utilization-block (CUB) handling in preparation of
introducing additional CUBs
- Use attribute groups to simplify registration, removal and extension
of measurement-related channel-path sysfs attributes
- Add a per-channel-path binary "ext_measurement" sysfs attribute that
provides access to extended channel-path measurement data
- Export measurement data for all channel-measurement-groups (CMG), not
only for a specific ones. This enables support of new CMG data
formats in userspace without the need for kernel changes
- Add a per-channel-path sysfs attribute "speed_bps" that provides the
operating speed in bits per second or 0 if the operating speed is not
available
- The CIO tracepoint subchannel-type field "st" is incorrectly set to
the value of subchannel-enabled SCHIB "ena" field. Fix that
- Do not forcefully limit vmemmap starting address to MAX_PHYSMEM_BITS
- Consider the maximum physical address available to a DCSS segment
(512GB) when memory layout is set up
- Simplify the virtual memory layout setup by reducing the size of
identity mapping vs vmemmap overlap
- Swap vmalloc and Lowcore/Real Memory Copy areas in virtual memory.
This will allow to place the kernel image next to kernel modules
- Move everyting KASLR related from <asm/setup.h> to <asm/page.h>
- Put virtual memory layout information into a structure to improve
code generation
- Currently __kaslr_offset is the kernel offset in both physical and
virtual memory spaces. Uncouple these offsets to allow uncoupling of
the addresses spaces
- Currently the identity mapping base address is implicit and is always
set to zero. Make it explicit by putting into __identity_base
persistent boot variable and use it in proper context
- Introduce .amode31 section start and end macros AMODE31_START and
AMODE31_END
- Introduce OS_INFO entries that do not reference any data in memory,
but rather provide only values
- Store virtual memory layout in OS_INFO. It is read out by
makedumpfile, crash and other tools
- Store virtual memory layout in VMCORE_INFO. It is read out by crash
and other tools when /proc/kcore device is used
- Create additional PT_LOAD ELF program header that covers kernel image
only, so that vmcore tools could locate kernel text and data when
virtual and physical memory spaces are uncoupled
- Uncouple physical and virtual address spaces
- Map kernel at fixed location when KASLR mode is disabled. The
location is defined by CONFIG_KERNEL_IMAGE_BASE kernel configuration
value.
- Rework deployment of kernel image for both compressed and
uncompressed variants as defined by CONFIG_KERNEL_UNCOMPRESSED kernel
configuration value
- Move .vmlinux.relocs section in front of the compressed kernel. The
interim section rescue step is avoided as result
- Correct modules thunk offset calculation when branch target is more
than 2GB away
- Kernel modules contain their own set of expoline thunks. Now that the
kernel modules area is less than 4GB away from kernel expoline
thunks, make modules use kernel expolines. Also make EXPOLINE_EXTERN
the default if the compiler supports it
- userfaultfd can insert shared zeropages into processes running VMs,
but that is not allowed for s390. Fallback to allocating a fresh
zeroed anonymous folio and insert that instead
- Re-enable shared zeropages for non-PV and non-skeys KVM guests
- Rename hex2bitmap() to ap_hex2bitmap() and export it for external use
- Add ap_config sysfs attribute to provide the means for setting or
displaying adapters, domains and control domains assigned to a
vfio-ap mediated device in a single operation
- Make vfio_ap_mdev_link_queue() ignore duplicate link requests
- Add write support to ap_config sysfs attribute to allow atomic update
a vfio-ap mediated device state
- Document ap_config sysfs attribute
- Function os_info_old_init() is expected to be called only from a
regular kdump kernel. Enable it to be called from a stand-alone dump
kernel
- Address gcc -Warray-bounds warning and fix array size in struct
os_info
- s390 does not support SMBIOS, so drop unneeded CONFIG_DMI checks
- Use unwinder instead of __builtin_return_address() with ftrace to
prevent returning of undefined values
- Sections .hash and .gnu.hash are only created when CONFIG_PIE_BUILD
kernel is enabled. Drop these for the case CONFIG_PIE_BUILD is
disabled
- Compile kernel with -fPIC and link with -no-pie to allow kpatch
feature always succeed and drop the whole CONFIG_PIE_BUILD
option-enabled code
- Add missing virt_to_phys() converter for VSIE facility and crypto
control blocks
* tag 's390-6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (54 commits)
Revert "s390: Relocate vmlinux ELF data to virtual address space"
KVM: s390: vsie: Use virt_to_phys for crypto control block
s390: Relocate vmlinux ELF data to virtual address space
s390: Compile kernel with -fPIC and link with -no-pie
s390: vmlinux.lds.S: Drop .hash and .gnu.hash for !CONFIG_PIE_BUILD
s390/ftrace: Use unwinder instead of __builtin_return_address()
s390/pci: Drop unneeded reference to CONFIG_DMI
s390/os_info: Fix array size in struct os_info
s390/os_info: Initialize old os_info in standalone dump kernel
docs: Update s390 vfio-ap doc for ap_config sysfs attribute
s390/vfio-ap: Add write support to sysfs attr ap_config
s390/vfio-ap: Ignore duplicate link requests in vfio_ap_mdev_link_queue
s390/vfio-ap: Add sysfs attr, ap_config, to export mdev state
s390/ap: Externalize AP bus specific bitmap reading function
s390/mm: Re-enable the shared zeropage for !PV and !skeys KVM guests
mm/userfaultfd: Do not place zeropages when zeropages are disallowed
s390/expoline: Make modules use kernel expolines
s390/nospec: Correct modules thunk offset calculation
s390/boot: Do not rescue .vmlinux.relocs section
s390/boot: Rework deployment of the kernel image
...
|
|
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
35d92abfbad8 ("net: hns3: fix kernel crash when devlink reload during initialization")
2a1a1a7b5fd7 ("net: hns3: add command queue trace for hns3")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Simon reported that ndo_change_mtu() methods were never
updated to use WRITE_ONCE(dev->mtu, new_mtu) as hinted
in commit 501a90c94510 ("inet: protect against too small
mtu values.")
We read dev->mtu without holding RTNL in many places,
with READ_ONCE() annotations.
It is time to take care of ndo_change_mtu() methods
to use corresponding WRITE_ONCE()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Simon Horman <horms@kernel.org>
Closes: https://lore.kernel.org/netdev/20240505144608.GB67882@kernel.org/
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://lore.kernel.org/r/20240506102812.3025432-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
What happens here is almost certainly wrong. However,
* it's the last remaining user of ->bd_inode anywhere in the tree
* it is *NOT* a fast path by any stretch of imagination
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
include/linux/filter.h
kernel/bpf/core.c
66e13b615a0c ("bpf: verifier: prevent userspace memory access")
d503a04f8bc0 ("bpf: Add support for certain atomics in bpf_arena to x86 JIT")
https://lore.kernel.org/all/20240429114939.210328b0@canb.auug.org.au/
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Alexander Gordeev:
- The function __storage_key_init_range() expects the end address to be
the first byte outside the range to be initialized. Fix the callers
that provide the last byte within the range instead.
- 3270 Channel Command Word (CCW) may contain zero data address in case
there is no data in the request. Add data availability check to avoid
erroneous non-zero value as result of virt_to_dma32(NULL) application
in cases there is no data
- Add missing CFI directives for an unwinder to restore the return
address in the vDSO assembler code
- NUL-terminate kernel buffer when duplicating user space memory region
on Channel IO (CIO) debugfs write inject
- Fix wrong format string in zcrypt debug output
- Return -EBUSY code when a CCA card is temporarily unavailabile
- Restore a loop that retries derivation of a protected key from a
secure key in cases the low level reports temporarily unavailability
with -EBUSY code
* tag 's390-6.9-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/paes: Reestablish retry loop in paes
s390/zcrypt: Use EBUSY to indicate temp unavailability
s390/zcrypt: Handle ep11 cprb return code
s390/zcrypt: Fix wrong format string in debug feature printout
s390/cio: Ensure the copied buf is NUL terminated
s390/vdso: Add CFI for RA register to asm macro vdso_func
s390/3270: Fix buffer assignment
s390/mm: Fix clearing storage keys for huge pages
s390/mm: Fix storage key clearing for guest huge pages
|
|
Symptom:
When the hsuid attribute is set for the first time on an IQD Layer3
device while the corresponding network interface is already UP,
the kernel will try to execute a napi function pointer that is NULL.
Example:
---------------------------------------------------------------------------
[ 2057.572696] illegal operation: 0001 ilc:1 [#1] SMP
[ 2057.572702] Modules linked in: af_iucv qeth_l3 zfcp scsi_transport_fc sunrpc nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6
nft_reject nft_ct nf_tables_set nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables libcrc32c nfnetlink ghash_s390 prng xts aes_s390 des_s390 de
s_generic sha3_512_s390 sha3_256_s390 sha512_s390 vfio_ccw vfio_mdev mdev vfio_iommu_type1 eadm_sch vfio ext4 mbcache jbd2 qeth_l2 bridge stp llc dasd_eckd_mod qeth dasd_mod
qdio ccwgroup pkey zcrypt
[ 2057.572739] CPU: 6 PID: 60182 Comm: stress_client Kdump: loaded Not tainted 4.18.0-541.el8.s390x #1
[ 2057.572742] Hardware name: IBM 3931 A01 704 (LPAR)
[ 2057.572744] Krnl PSW : 0704f00180000000 0000000000000002 (0x2)
[ 2057.572748] R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:3 PM:0 RI:0 EA:3
[ 2057.572751] Krnl GPRS: 0000000000000004 0000000000000000 00000000a3b008d8 0000000000000000
[ 2057.572754] 00000000a3b008d8 cb923a29c779abc5 0000000000000000 00000000814cfd80
[ 2057.572756] 000000000000012c 0000000000000000 00000000a3b008d8 00000000a3b008d8
[ 2057.572758] 00000000bab6d500 00000000814cfd80 0000000091317e46 00000000814cfc68
[ 2057.572762] Krnl Code:#0000000000000000: 0000 illegal
>0000000000000002: 0000 illegal
0000000000000004: 0000 illegal
0000000000000006: 0000 illegal
0000000000000008: 0000 illegal
000000000000000a: 0000 illegal
000000000000000c: 0000 illegal
000000000000000e: 0000 illegal
[ 2057.572800] Call Trace:
[ 2057.572801] ([<00000000ec639700>] 0xec639700)
[ 2057.572803] [<00000000913183e2>] net_rx_action+0x2ba/0x398
[ 2057.572809] [<0000000091515f76>] __do_softirq+0x11e/0x3a0
[ 2057.572813] [<0000000090ce160c>] do_softirq_own_stack+0x3c/0x58
[ 2057.572817] ([<0000000090d2cbd6>] do_softirq.part.1+0x56/0x60)
[ 2057.572822] [<0000000090d2cc60>] __local_bh_enable_ip+0x80/0x98
[ 2057.572825] [<0000000091314706>] __dev_queue_xmit+0x2be/0xd70
[ 2057.572827] [<000003ff803dd6d6>] afiucv_hs_send+0x24e/0x300 [af_iucv]
[ 2057.572830] [<000003ff803dd88a>] iucv_send_ctrl+0x102/0x138 [af_iucv]
[ 2057.572833] [<000003ff803de72a>] iucv_sock_connect+0x37a/0x468 [af_iucv]
[ 2057.572835] [<00000000912e7e90>] __sys_connect+0xa0/0xd8
[ 2057.572839] [<00000000912e9580>] sys_socketcall+0x228/0x348
[ 2057.572841] [<0000000091514e1a>] system_call+0x2a6/0x2c8
[ 2057.572843] Last Breaking-Event-Address:
[ 2057.572844] [<0000000091317e44>] __napi_poll+0x4c/0x1d8
[ 2057.572846]
[ 2057.572847] Kernel panic - not syncing: Fatal exception in interrupt
-------------------------------------------------------------------------------------------
Analysis:
There is one napi structure per out_q: card->qdio.out_qs[i].napi
The napi.poll functions are set during qeth_open().
Since
commit 1cfef80d4c2b ("s390/qeth: Don't call dev_close/dev_open (DOWN/UP)")
qeth_set_offline()/qeth_set_online() no longer call dev_close()/
dev_open(). So if qeth_free_qdio_queues() cleared
card->qdio.out_qs[i].napi.poll while the network interface was UP and the
card was offline, they are not set again.
Reproduction:
chzdev -e $devno layer2=0
ip link set dev $network_interface up
echo 0 > /sys/bus/ccwgroup/devices/0.0.$devno/online
echo foo > /sys/bus/ccwgroup/devices/0.0.$devno/hsuid
echo 1 > /sys/bus/ccwgroup/devices/0.0.$devno/online
-> Crash (can be enforced e.g. by af_iucv connect(), ip link down/up, ...)
Note that a Completion Queue (CQ) is only enabled or disabled, when hsuid
is set for the first time or when it is removed.
Workarounds:
- Set hsuid before setting the device online for the first time
or
- Use chzdev -d $devno; chzdev $devno hsuid=xxx; chzdev -e $devno;
to set hsuid on an existing device. (this will remove and recreate the
network interface)
Fix:
There is no need to free the output queues when a completion queue is
added or removed.
card->qdio.state now indicates whether the inbound buffer pool and the
outbound queues are allocated.
card->qdio.c_q indicates whether a CQ is allocated.
Fixes: 1cfef80d4c2b ("s390/qeth: Don't call dev_close/dev_open (DOWN/UP)")
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240430091004.2265683-1-wintera@linux.ibm.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Use -EBUSY instead of -EAGAIN in zcrypt_ccamisc.c
in cases where the CCA card returns 8/2290 to indicate
a temporarily unavailability of this function.
Fixes: ed6776c96c60 ("s390/crypto: remove retry loop with sleep from PAES pkey invocation")
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
An EP11 reply cprb contains a field ret_code which may
hold an error code different than the error code stored
in the payload of the cprb. As of now all the EP11 misc
functions do not evaluate this field but focus on the
error code in the payload.
Before checking the payload error, first the cprb error
field should be evaluated which is introduced with this
patch.
If the return code value 0x000c0003 is seen, this
indicates a busy situation which is reflected by
-EBUSY in the zcrpyt_ep11misc.c low level function.
A higher level caller should consider to retry after
waiting a dedicated duration (say 1 second).
Fixes: ed6776c96c60 ("s390/crypto: remove retry loop with sleep from PAES pkey invocation")
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Fix wrong format string debug feature: %04x was used
to print out a 32 bit value. - changed to %08x.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
I added dst_rt6_info() in commit
e8dfd42c17fa ("ipv6: introduce dst_rt6_info() helper")
This patch does a similar change for IPv4.
Instead of (struct rtable *)dst casts, we can use :
#define dst_rtable(_ptr) \
container_of_const(_ptr, struct rtable, dst)
Patch is smaller than IPv6 one, because IPv4 has skb_rtable() helper.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/20240429133009.1227754-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The struct 'ism_client' is specialized for s390 platform firmware ISM.
So replace it with 'void' to make SMCD DMB registration helper generic
for both Emulated-ISM and existing ISM.
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-and-tested-by: Jan Karcher <jaka@linux.ibm.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently, we allocate a lbuf-sized kernel buffer and copy lbuf from
userspace to that buffer. Later, we use scanf on this buffer but we don't
ensure that the string is terminated inside the buffer, this can lead to
OOB read when using scanf. Fix this issue by using memdup_user_nul instead.
Fixes: a4f17cc72671 ("s390/cio: add CRW inject functionality")
Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://lore.kernel.org/r/20240424-fix-oob-read-v2-5-f1f1b53a10f4@gmail.com
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Instead of (struct rt6_info *)dst casts, we can use :
#define dst_rt6_info(_ptr) \
container_of_const(_ptr, struct rt6_info, dst)
Some places needed missing const qualifiers :
ip6_confirm_neigh(), ipv6_anycast_destination(),
ipv6_unicast_destination(), has_gateway()
v2: added missing parts (David Ahern)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since commit 1b2ac5a6d61f ("s390/3270: use new address translation
helpers") rq->buffer is passed unconditionally to virt_to_dma32().
The 3270 driver allocates requests without buffer, so the value passed
to virt_to_dma32 might be NULL. Check for NULL before assigning.
Fixes: 1b2ac5a6d61f ("s390/3270: use new address translation helpers")
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/ethernet/ti/icssg/icssg_prueth.c
net/mac80211/chan.c
89884459a0b9 ("wifi: mac80211: fix idle calculation with multi-link")
87f5500285fb ("wifi: mac80211: simplify ieee80211_assign_link_chanctx()")
https://lore.kernel.org/all/20240422105623.7b1fbda2@canb.auug.org.au/
net/unix/garbage.c
1971d13ffa84 ("af_unix: Suppress false-positive lockdep splat for spin_lock() in __unix_gc().")
4090fa373f0e ("af_unix: Replace garbage collection algorithm.")
drivers/net/ethernet/ti/icssg/icssg_prueth.c
drivers/net/ethernet/ti/icssg/icssg_common.c
4dcd0e83ea1d ("net: ti: icssg-prueth: Fix signedness bug in prueth_init_rx_chns()")
e2dc7bfd677f ("net: ti: icssg-prueth: Move common functions into a separate file")
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Allow writing a complete set of masks to ap_config. Doing so will
cause the vfio-ap driver to replace the vfio-ap mediated device's
matrix masks with the given set of masks. If the given state cannot
be set, then no changes are made to the vfio-ap mediated device.
The format of the data written to ap_config is as follows:
{amask},{dmask},{cmask}\n
\n is a newline character.
amask, dmask, and cmask are masks identifying which adapters, domains,
and control domains should be assigned to the mediated device.
The format of a mask is as follows:
0xNN..NN
Where NN..NN is 64 hexadecimal characters representing a 256-bit value.
The leftmost (highest order) bit represents adapter/domain 0.
For an example set of masks that represent your mdev's current
configuration, simply cat ap_config.
This attribute is intended to be used by an mdevctl callout script
supporting the mdev type vfio_ap-passthrough to atomically update a
vfio-ap mediated device's state.
Signed-off-by: "Jason J. Herne" <jjherne@linux.ibm.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Link: https://lore.kernel.org/r/20240415152555.13152-5-jjherne@linux.ibm.com
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
vfio_ap_mdev_link_queue is changed to detect if a matrix_mdev has
already linked the given queue. If so, it bails out.
Signed-off-by: "Jason J. Herne" <jjherne@linux.ibm.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Link: https://lore.kernel.org/r/20240415152555.13152-4-jjherne@linux.ibm.com
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Add ap_config sysfs attribute. This will provide the means for
setting or displaying the adapters, domains and control domains assigned
to the vfio-ap mediated device in a single operation. This sysfs
attribute is comprised of three masks: One for adapters, one for domains,
and one for control domains.
This attribute is intended to be used by mdevctl to query a vfio-ap
mediated device's state.
Signed-off-by: "Jason J. Herne" <jjherne@linux.ibm.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Link: https://lore.kernel.org/r/20240415152555.13152-3-jjherne@linux.ibm.com
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
