summaryrefslogtreecommitdiff
path: root/drivers/remoteproc/qcom_q6v5_pas.c
AgeCommit message (Collapse)Author
2023-06-14remoteproc: qcom_q6v5_pas: staticize adsp_segment_dump()Krzysztof Kozlowski
adsp_segment_dump() is not used outside of this unit, so add missing static to fix: drivers/remoteproc/qcom_q6v5_pas.c:108:6: warning: no previous prototype for ‘adsp_segment_dump’ [-Wmissing-prototypes] Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230507144826.193067-1-krzysztof.kozlowski@linaro.org
2023-05-09remoteproc: qcom_q6v5_pas: Convert to platform remove callback returning voidUwe Kleine-König
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org> Link: https://lore.kernel.org/r/20230504194453.1150368-12-u.kleine-koenig@pengutronix.de Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
2023-04-25Merge tag 'rproc-v6.4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux Pull remoteproc updates from Bjorn Andersson: - Unnecessary type casts from the 'void *' rproc->priv pointer are dropped throughout the subsystem. - A kernel-doc error is corrected in the Mediatek SCPI IPI implementation - The firmware loading onto the IMX DSP remote processors is reworked to avoid non-32bit memory operations. A module parameter is introduced to assist development of firmware without communication abilities in place. Error paths in imx_dsp_rproc_mbox_alloc() is cleaned up - The cluster configuration handling in the TI K3 R5 driver is corrected and support for the single-R5 core found in the TI AM62x SoC family is introduced - The TI PRU driver device- to virtual-address translation is updated to avoid compiler warning about the unsigned device-address always being larger than 0 - The ST remoteproc driver is transitioned to use of_property_present() - Issues with kicks arriving after the STM32 remote processor has been shut down are mitigated by checking the processor's state before handling them. - Support for mailbox channels for communication with the remote processors are added to the Xilinx R5 remoteproc driver. The naming of carveouts are corrected and their parsing is reworked. For this a couple of fixes targeting the mailbox subsystem are picked up here as well. - Reference counting of of_nodes are corrected in the ST, STM32, RCAR and IMX remoteproc drivers * tag 'rproc-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (24 commits) remoteproc: st: Use of_property_present() for testing DT property presence dt-bindings: remoteproc: Drop unneeded quotes remoteproc: imx_dsp_rproc: Fix kernel test robot sparse warning remoteproc: imx_dsp_rproc: Improve exception handling in imx_dsp_rproc_mbox_alloc() remoteproc: pru: Remove always true check positive unsigned value dt-bindings: remoteproc: stm32-rproc: Typo fix remoteproc: stm32_rproc: Add mutex protection for workqueue remoteproc: Remove unnecessary (void*) conversions remoteproc: imx_dsp_rproc: Call of_node_put() on iteration error remoteproc: imx_rproc: Call of_node_put() on iteration error remoteproc: rcar_rproc: Call of_node_put() on iteration error remoteproc: st: Call of_node_put() on iteration error remoteproc: stm32: Call of_node_put() on iteration error remoteproc: k3-r5: Use separate compatible string for TI AM62x SoC family dt-bindings: remoteproc: ti: Add new compatible for AM62 SoC family remoteproc: k3-r5: Simplify cluster mode setting usage remoteproc/mtk_scpi_ipi: Fix one kernel-doc comment remoteproc: xilinx: Add mailbox channels for rpmsg drivers: remoteproc: xilinx: Fix carveout names mailbox: zynqmp: Fix typo in IPI documentation ...
2023-04-03remoteproc: Remove unnecessary (void*) conversionsYu Zhe
Pointer variables of void * type do not require type cast. Signed-off-by: Yu Zhe <yuzhe@nfschina.com> Link: https://lore.kernel.org/r/20230328024907.29791-1-yuzhe@nfschina.com [Fixed merge conflict in xlnx_r5_remoteproc.c] Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
2023-03-15firmware: qcom_scm: Use fixed width src vm bitmapElliot Berman
The maximum VMID for assign_mem is 63. Use a u64 to represent this bitmap instead of architecture-dependent "unsigned int" which varies in size on 32-bit and 64-bit platforms. Acked-by: Kalle Valo <kvalo@kernel.org> (ath10k) Tested-by: Gokul krishna Krishnakumar <quic_gokukris@quicinc.com> Signed-off-by: Elliot Berman <quic_eberman@quicinc.com> Reviewed-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230213181832.3489174-1-quic_eberman@quicinc.com
2023-02-27Merge tag 'soc-drivers-6.3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Arnd Bergmann: "As usual, there are lots of minor driver changes across SoC platforms from NXP, Amlogic, AMD Zynq, Mediatek, Qualcomm, Apple and Samsung. These usually add support for additional chip variations in existing drivers, but also add features or bugfixes. The SCMI firmware subsystem gains a unified raw userspace interface through debugfs, which can be used for validation purposes. Newly added drivers include: - New power management drivers for StarFive JH7110, Allwinner D1 and Renesas RZ/V2M - A driver for Qualcomm battery and power supply status - A SoC device driver for identifying Nuvoton WPCM450 chips - A regulator coupler driver for Mediatek MT81xxv" * tag 'soc-drivers-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits) power: supply: Introduce Qualcomm PMIC GLINK power supply soc: apple: rtkit: Do not copy the reg state structure to the stack soc: sunxi: SUN20I_PPU should depend on PM memory: renesas-rpc-if: Remove redundant division of dummy soc: qcom: socinfo: Add IDs for IPQ5332 and its variant dt-bindings: arm: qcom,ids: Add IDs for IPQ5332 and its variant dt-bindings: power: qcom,rpmpd: add RPMH_REGULATOR_LEVEL_LOW_SVS_L1 firmware: qcom_scm: Move qcom_scm.h to include/linux/firmware/qcom/ MAINTAINERS: Update qcom CPR maintainer entry dt-bindings: firmware: document Qualcomm SM8550 SCM dt-bindings: firmware: qcom,scm: add qcom,scm-sa8775p compatible soc: qcom: socinfo: Add Soc IDs for IPQ8064 and variants dt-bindings: arm: qcom,ids: Add Soc IDs for IPQ8064 and variants soc: qcom: socinfo: Add support for new field in revision 17 soc: qcom: smd-rpm: Add IPQ9574 compatible soc: qcom: pmic_glink: remove redundant calculation of svid soc: qcom: stats: Populate all subsystem debugfs files dt-bindings: soc: qcom,rpmh-rsc: Update to allow for generic nodes soc: qcom: pmic_glink: add CONFIG_NET/CONFIG_OF dependencies soc: qcom: pmic_glink: Introduce altmode support ...
2023-02-14remoteproc: qcom_q6v5_pas: enable sm8550 adsp & cdsp autobootNeil Armstrong
Set the SM8550 adsp & cdsp auto_boot to true to match the behavior of the previous platforms. Fixes: 7eddedc97563 ("remoteproc: qcom_q6v5_pas: add sm8550 adsp, cdsp & mpss compatible & data") Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230206-topic-sm8550-upstream-fix-remoteproc-autoboot-v1-1-11445a0c27c6@linaro.org
2023-02-14remoteproc: qcom: pas: Add sm6115 remoteprocsBhupesh Sharma
Among the subsystems in the Qualcomm sm6115 platform we find audio, compute and modem DSPs. Add support for controlling these using the peripheral authentication service (PAS) remoteproc driver. Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230128053504.2099620-1-bhupesh.sharma@linaro.org
2023-02-14remoteproc: qcom: pas: Adjust the phys addr wrt the mem regionYogesh Lal
The minidump table in the toc contains physical addresses that may lie before the physical address of the first elf segment in relocatable images. This change adds a custom dump function for minidumps which calculates the offset into the carveout region using the start of the physical address instead of the start of the first elf segment. Signed-off-by: Yogesh Lal <quic_ylal@quicinc.com> Reviewed-by: Sibi Sankar <quic_sibis@quicinc.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/1667409129-6254-1-git-send-email-quic_ylal@quicinc.com
2023-02-08firmware: qcom_scm: Move qcom_scm.h to include/linux/firmware/qcom/Elliot Berman
Move include/linux/qcom_scm.h to include/linux/firmware/qcom/qcom_scm.h. This removes 1 of a few remaining Qualcomm-specific headers into a more approciate subdirectory under include/. Suggested-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Elliot Berman <quic_eberman@quicinc.com> Reviewed-by: Guru Das Srinagesh <quic_gurus@quicinc.com> Acked-by: Mukesh Ojha <quic_mojha@quicinc.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230203210956.3580811-1-quic_eberman@quicinc.com
2023-01-18remoteproc: qcom_q6v5_pas: add sm8550 adsp, cdsp & mpss compatible & dataNeil Armstrong
This adds the compatible & data for the aDSP, cDSP and MPSS found in the SM8550 SoC. This platform requires the "Devicetree" firmware to be loaded along the main firmware. The MPSS DSM memory to be assigned to the MPSS subsystem is the third memory-region entry as defined in the bindings. Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221114-narmstrong-sm8550-upstream-remoteproc-v4-5-54154c08c0b7@linaro.org
2023-01-18remoteproc: qcom_q6v5_pas: add support for assigning memory to firmwareNeil Armstrong
Starting with SM8550, the DSM memory must now be shared to the firmware by the APPS process instead of being defined in the carveout memory reserved for MPSS. In order to handle that, add a region_assign_idx in adsp_data to specify with index of memory-region must be assigned to the MPSS via the qcom_scm_assign_mem() call at probe time. Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221114-narmstrong-sm8550-upstream-remoteproc-v4-4-54154c08c0b7@linaro.org
2023-01-18remoteproc: qcom_q6v5_pas: add support for dtb co-firmware loadingNeil Armstrong
Starting from the SM8550 SoC, starting the aDSP, cDSP and MPSS will require loading a separate "Devicetree" firmware. In order to satisfy the load & authentication order required by the SM8550 SoC, the following is implemented: - "Devicetree" firmware request & load in dedicated memory - Q6V5 prepare - Power Domain & Clocks enable - "Devicetree" firmware authentication - Main firmware load in dedicated memory - Main firmware authentication - Q6V5 startup - "Devicetree" firmware metadata release - Main metadata release When booting older platforms, the "Devicetree" steps would be bypassed and the load & authentication order would still be valid. Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221114-narmstrong-sm8550-upstream-remoteproc-v4-3-54154c08c0b7@linaro.org
2022-12-28remoteproc: qcom: pas: Fix subdevice add orderMukesh Ojha
Currently, the notification like QCOM_SSR_BEFORE_SHUTDOWN is not exactly sent before starting shutdown activity on remote subsystem but it is getting sent after sysmon shutdown request to remote. On getting QCOM_SSR_BEFORE_SHUTDOWN, some client want remote subsystem to be alive to communicate but as sysmon shutdown request is getting sent to remote before QCOM_SSR_BEFORE_SHUTDOWN notification sent to kernel client due to which remote is not in a condition to communicate with kernel clients. Fixing the subdevice ordering will fix this as ssr subdevice will be first one to get triggered in shutdown/stop path. Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/1671024983-22634-1-git-send-email-quic_mojha@quicinc.com
2022-12-28remoteproc: qcom: pas: Add MSM8953 ADSP PIL supportSireesh Kodali
Add support for the Audio DSP PIL found on the Qualcomm MSM8953 platform. The same configuration is used on all SoCs based on the MSM8953 platform (SDM450, SDA450, SDM625, SDM632, APQ8053). Signed-off-by: Sireesh Kodali <sireeshkodali1@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221013042749.104668-2-sireeshkodali1@gmail.com
2022-12-28remoteproc: qcom: q6v5: Use _clk_get_optional for aggre2_clkAbel Vesa
Only msm8996 and msm8998 SLPIs need the RPM_SMD_AGGR2_NOC_CLK (as aggre2 clock). None of the other platforms do. Back when the support for the mentioned platforms was added to the q6v5 pass driver, the devm_clk_get_optional was not available, so the has_aggre2_clk was necessary in order to differentiate between plaforms that need this clock and those which do not. Now that devm_clk_get_optional is available, we can drop the has_aggre2_clk. This makes the adsp_data more cleaner and removes the check within adsp_init_clocks. Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220718121514.2451590-1-abel.vesa@linaro.org
2022-12-06remoteproc: qcom_q6v5_pas: Fix missing of_node_put() in ↵Yuan Can
adsp_alloc_memory_region() The pointer node is returned by of_parse_phandle() with refcount incremented. We should use of_node_put() on it when done. Fixes: b9e718e950c3 ("remoteproc: Introduce Qualcomm ADSP PIL") Signed-off-by: Yuan Can <yuancan@huawei.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221203070639.15128-1-yuancan@huawei.com
2022-12-06remoteproc: qcom_q6v5_pas: detach power domains on removeLuca Weiss
We need to detach from the power domains also on remove, not just on probe fail so a subsequent probe works as expected. Otherwise the following error appears on re-probe: [ 29.452005] sysfs: cannot create duplicate filename '/devices/genpd:0:3000000.remoteproc' [ 29.477121] CPU: 1 PID: 483 Comm: sh Tainted: G W 6.1.0-rc4-00075-g71a113770bda #78 [ 29.510319] Hardware name: Fairphone 4 (DT) [ 29.538335] Call trace: [ 29.564470] dump_backtrace.part.0+0xe0/0xf0 [ 29.592602] show_stack+0x18/0x30 [ 29.619616] dump_stack_lvl+0x64/0x80 [ 29.646834] dump_stack+0x18/0x34 [ 29.673541] sysfs_warn_dup+0x60/0x7c [ 29.700592] sysfs_create_dir_ns+0xec/0x110 [ 29.728057] kobject_add_internal+0xb8/0x374 [ 29.755530] kobject_add+0x9c/0x104 [ 29.782072] device_add+0xbc/0x8a0 [ 29.808445] device_register+0x20/0x30 [ 29.835175] genpd_dev_pm_attach_by_id+0xa4/0x190 [ 29.862851] genpd_dev_pm_attach_by_name+0x3c/0xb0 [ 29.890472] dev_pm_domain_attach_by_name+0x20/0x30 [ 29.918212] adsp_probe+0x278/0x580 [ 29.944384] platform_probe+0x68/0xc0 [ 29.970603] really_probe+0xbc/0x2dc [ 29.996662] __driver_probe_device+0x78/0xe0 [ 30.023491] device_driver_attach+0x48/0xac [ 30.050215] bind_store+0xb8/0x114 [ 30.075957] drv_attr_store+0x24/0x3c [ 30.101874] sysfs_kf_write+0x44/0x54 [ 30.127751] kernfs_fop_write_iter+0x120/0x1f0 [ 30.154448] vfs_write+0x1ac/0x380 [ 30.179937] ksys_write+0x70/0x104 [ 30.205274] __arm64_sys_write+0x1c/0x2c [ 30.231060] invoke_syscall+0x48/0x114 [ 30.256594] el0_svc_common.constprop.0+0x44/0xec [ 30.283183] do_el0_svc+0x2c/0xd0 [ 30.308320] el0_svc+0x2c/0x84 [ 30.333059] el0t_64_sync_handler+0xf4/0x120 [ 30.359001] el0t_64_sync+0x18c/0x190 [ 30.384385] kobject_add_internal failed for genpd:0:3000000.remoteproc with -EEXIST, don't try to register things with the same name in the same directory. [ 30.406029] remoteproc remoteproc0: releasing 3000000.remoteproc [ 30.416064] qcom_q6v5_pas: probe of 3000000.remoteproc failed with error -17 Fixes: 17ee2fb4e856 ("remoteproc: qcom: pas: Vote for active/proxy power domains") Reviewed-by: Sibi Sankar <quic_sibis@quicinc.com> Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com> Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221118090816.100012-2-luca.weiss@fairphone.com
2022-12-06remoteproc: qcom_q6v5_pas: disable wakeup on probe fail or removeLuca Weiss
Leaving wakeup enabled during probe fail (-EPROBE_DEFER) or remove makes the subsequent probe fail. [ 3.749454] remoteproc remoteproc0: releasing 3000000.remoteproc [ 3.752949] qcom_q6v5_pas: probe of 3000000.remoteproc failed with error -17 [ 3.878935] remoteproc remoteproc0: releasing 4080000.remoteproc [ 3.887602] qcom_q6v5_pas: probe of 4080000.remoteproc failed with error -17 [ 4.319552] remoteproc remoteproc0: releasing 8300000.remoteproc [ 4.332716] qcom_q6v5_pas: probe of 8300000.remoteproc failed with error -17 Fix this by disabling wakeup in both cases so the driver can properly probe on the next try. Fixes: a781e5aa5911 ("remoteproc: core: Prevent system suspend during remoteproc recovery") Fixes: dc86c129b4fb ("remoteproc: qcom: pas: Mark devices as wakeup capable") Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com> Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org> Reviewed-by: Sibi Sankar <quic_sibis@quicinc.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221118090816.100012-1-luca.weiss@fairphone.com
2022-08-08remoteproc: qcom_q6v5_pas: Do not fail if regulators are not foundManivannan Sadhasivam
devm_regulator_get_optional() API will return -ENODEV if the regulator was not found. For the optional supplies CX, PX we should not fail in that case but rather continue. So let's catch that error and continue silently if those regulators are not found. The commit 3f52d118f992 ("remoteproc: qcom_q6v5_pas: Deal silently with optional px and cx regulators") was supposed to do the same but it missed the fact that devm_regulator_get_optional() API returns -ENODEV when the regulator was not found. Cc: Abel Vesa <abel.vesa@linaro.org> Fixes: 3f52d118f992 ("remoteproc: qcom_q6v5_pas: Deal silently with optional px and cx regulators") Reported-by: Steev Klimaszewski <steev@kali.org> Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Tested-by: Steev Klimaszewski <steev@kali.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220801053939.12556-1-manivannan.sadhasivam@linaro.org
2022-07-18remoteproc: qcom_q6v5_pas: Deal silently with optional px and cx regulatorsAbel Vesa
Use _get_optional as some platforms might not provide the px and cx regulators. This avoids printing the following for each unavailable regulator: [ 4.350229] qcom_q6v5_pas 5c00000.remoteproc: supply cx not found, using dummy regulator [ 4.374224] qcom_q6v5_pas 5c00000.remoteproc: supply px not found, using dummy regulator Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220713152835.3848875-1-abel.vesa@linaro.org
2022-07-18remoteproc: qcom: pas: Check if coredump is enabledSiddharth Gupta
Client drivers need to check if coredump is enabled for the rproc before continuing with coredump generation. This change adds a check in the PAS driver. Fixes: 8ed8485c4f05 ("remoteproc: qcom: Add capability to collect minidumps") Signed-off-by: Siddharth Gupta <sidgup@codeaurora.org> Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/1657022900-2049-5-git-send-email-quic_sibis@quicinc.com
2022-07-18remoteproc: qcom: pas: Mark devices as wakeup capableSiddharth Gupta
device_wakeup_enable() on its own is not capable of setting device as wakeup capable, it needs to be used in conjunction with device_set_wakeup_capable(). The device_init_wakeup() calls both these functions on the device passed. Fixes: a781e5aa5911 ("remoteproc: core: Prevent system suspend during remoteproc recovery") Signed-off-by: Siddharth Gupta <sidgup@codeaurora.org> Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/1657022900-2049-4-git-send-email-quic_sibis@quicinc.com
2022-07-18remoteproc: qcom: pas: Mark va as io memorySiddharth Gupta
The pas driver remaps the entire carveout region using the dev_ioremap_wc() call, which is then used in the adsp_da_to_va() calls made by the rproc framework. This change marks the va returned by this call as an iomem va. Signed-off-by: Siddharth Gupta <sidgup@codeaurora.org> Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/1657022900-2049-3-git-send-email-quic_sibis@quicinc.com
2022-07-18remoteproc: qcom: pas: Add decrypt shutdown support for modemSibi Sankar
The initial shutdown request to modem on SM8450 SoCs would start the decryption process and will keep returning errors until the modem shutdown is complete. Fix this by retrying shutdowns in fixed intervals. Err Logs on modem shutdown: qcom_q6v5_pas 4080000.remoteproc: failed to shutdown: -22 remoteproc remoteproc3: can't stop rproc: -22 Fixes: 5cef9b48458d ("remoteproc: qcom: pas: Add SM8450 remoteproc support") Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/1657022900-2049-2-git-send-email-quic_sibis@quicinc.com
2022-05-05remoteproc: qcom: pas: Add MSM8226 ADSP supportLuca Weiss
Add a config for the ADSP present on MSM8226. Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220423155059.660387-2-luca@z3ntu.xyz
2022-04-22remoteproc: qcom: pas: Add sc8280xp remoteprocsBjorn Andersson
Among the subsystems in the Qualcomm sc8280xp platform we find an audio and two compute DSPs. Add support for controlling these using the peripheral authentication service (PAS) remoteproc driver. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20220408220539.625301-2-bjorn.andersson@linaro.org
2022-02-03remoteproc: qcom: pas: Add SM8450 remoteproc supportBjorn Andersson
Add audio, compute, sensor and modem remoteproc compatibles to the PAS remoteproc driver. The resources needed for each one matches those of SM8350, so its descs are reused. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220128025513.97188-12-bjorn.andersson@linaro.org
2022-02-03remoteproc: qcom: pas: Carry PAS metadata contextBjorn Andersson
Starting with Qualcomm SM8450 the metadata object shared with the secure world during authentication and booting of a remoteproc needs to be alive from init_image() until auth_and_reset(). Use the newly introduced "PAS metadata context" object to track this context from load until the firmware has been booted. In the even that load is performed but the process for some reason doesn't reach auth_and_reset the unprepare callback is used to clean up the allocated memory. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220128025513.97188-10-bjorn.andersson@linaro.org
2021-12-13remoteproc: qcom: pas: Add SM6350 CDSP supportLuca Weiss
Add a config for the CDSP present on SM6350. Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211213082208.21492-7-luca.weiss@fairphone.com
2021-12-13remoteproc: qcom: pas: Add SM6350 ADSP supportLuca Weiss
Add a config for the ADSP present on SM6350. Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211213082208.21492-5-luca.weiss@fairphone.com
2021-12-13remoteproc: qcom: pas: Add SM6350 MPSS supportLuca Weiss
Add a config for the MPSS present on SM6350. Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211213082208.21492-3-luca.weiss@fairphone.com
2021-12-13remoteproc: qcom: pas: Add missing power-domain "mxc" for CDSPSibi Sankar
Add missing power-domain "mxc" required by CDSP PAS remoteproc on SM8350 SoC. Fixes: e8b4e9a21af7 ("remoteproc: qcom: pas: Add SM8350 PAS remoteprocs") Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Cc: stable@vger.kernel.org Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/1624559605-29847-1-git-send-email-sibis@codeaurora.org
2021-09-27remoteproc: qcom: pas: Add SC7280 Modem supportSibi Sankar
Add support for booting the Modem DSP found on QTI SC7280 SoCs. Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/1631886935-14691-3-git-send-email-sibis@codeaurora.org
2021-09-27remoteproc: qcom: pas: Use the same init resources for MSM8996 and MSM8998Yassine Oudjana
The resources for MSM8996 are missing power domains, and adding them makes the resources identical to the MSM8998 ones. Rename msm8998_adsp_resource to msm8996_adsp_resource then use it for both chips. Also add power domains to slpi_resource_init and use it for both chips. Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210926190555.278589-3-y.oudjana@protonmail.com
2021-09-27remoteproc: qcom: q6v5: Use qmp_send to update co-processor load stateSibi Sankar
The power domains exposed by the AOSS QMP driver control the load state resources linked to modem, adsp, cdsp remoteprocs. These are used to notify the Always on Subsystem (AOSS) that a particular co-processor is up/down. AOSS uses this information to wait for the co-processors to suspend before starting its sleep sequence. These co-processors enter low-power modes independent to that of the application processor and the load state resources linked to them are expected to remain unaltered across system suspend/resume cycles. To achieve this behavior lets stop using the power-domains exposed by the AOSS QMP node and replace them with generic qmp_send interface instead. Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> [bjorn: Fixed up build error in q6v5_wcss_remove()] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/1631800770-371-5-git-send-email-sibis@codeaurora.org
2021-08-04remoteproc: q6v5_pas: Add sdm660 ADSP PIL compatibleKonrad Dybcio
This chipset seems to work fine with the "generic" configuration. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20210728215212.18217-2-konrad.dybcio@somainline.org [bjorn: Use "-pas" suffix for remoteprocs using TrustZone] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-06-25remoteproc: qcom: pas: Add SC8180X adsp, cdsp and mpssBjorn Andersson
The Qualcomm SC8180X has the typical ADSP, CDSP and MPSS remote processors operated using the PAS interface, add support for these. Attempts to configuring mss.lvl is failing, so a new adsp_data is provided that skips this resource, for now. Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210608174944.2045215-2-bjorn.andersson@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-04-13remoteproc: qcom: pas: Add modem support for SDX55Manivannan Sadhasivam
Add remoteproc support for Hexagon modem found on the Qualcomm SDX55 platform. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210408171211.92141-1-manivannan.sadhasivam@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-03-11remoteproc: add is_iomem to da_to_vaPeng Fan
Introduce an extra parameter is_iomem to da_to_va, then the caller could take the memory as normal memory or io mapped memory. Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Link: https://lore.kernel.org/r/1615029865-23312-5-git-send-email-peng.fan@oss.nxp.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-02-11remoteproc: qcom: pas: Add SM8350 PAS remoteprocsVinod Koul
Add audio, compute, modem and sensor DSP resources to the Qualcomm PAS driver. Signed-off-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20210210104539.340349-2-vkoul@kernel.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-12-10remoteproc: qcom: pas: fix error handling in adsp_pds_enableZhang Qilong
If the pm_runtime_get_sync failed in adsp_pds_enable when loop (i), The unroll_pd_votes will start from (i - 1), and it will resulted in following problems: 1) pm_runtime_get_sync will increment pm usage counter even it failed. Forgetting to pm_runtime_put_noidle will result in reference leak. 2) Have not reset pds[i] performance state. Then we fix it. Fixes: 17ee2fb4e8567 ("remoteproc: qcom: pas: Vote for active/proxy power domains") Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com> Link: https://lore.kernel.org/r/20201102143554.144707-1-zhangqilong3@huawei.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-12-10remoteproc: qcom: Add minidump id for sm8150 modemSiddharth Gupta
Add minidump id for modem in sm8150 chipset so that the regions to be included in the coredump generated upon a crash is based on the minidump tables in SMEM instead of those in the ELF header. Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by, Reviewed-by or Tested-by that you received previously.: Signed-off-by: Siddharth Gupta <sidgup@codeaurora.org> Link: https://lore.kernel.org/r/1605819935-10726-5-git-send-email-sidgup@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-12-10remoteproc: qcom: Add capability to collect minidumpsSiddharth Gupta
This patch adds support for collecting minidump in the event of remoteproc crash. Parse the minidump table based on remoteproc's unique minidump-id, read all memory regions from the remoteproc's minidump table entry and expose the memory to userspace. The remoteproc platform driver can choose to collect a full/mini dump by specifying the coredump op. Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Co-developed-by: Rishabh Bhatnagar <rishabhb@codeaurora.org> Signed-off-by: Rishabh Bhatnagar <rishabhb@codeaurora.org> Co-developed-by: Gurbir Arora <gurbaror@codeaurora.org> Signed-off-by: Gurbir Arora <gurbaror@codeaurora.org> Signed-off-by: Siddharth Gupta <sidgup@codeaurora.org> Link: https://lore.kernel.org/r/1605819935-10726-4-git-send-email-sidgup@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-11-25remoteproc: qcom: q6v5: Query sysmon before graceful shutdownBjorn Andersson
Requesting a graceful shutdown through the shared memory state signals will not be acked in the event that sysmon has already successfully shut down the remote firmware. So extend the stop request API to optionally take the remoteproc's sysmon instance and query if there's already been a successful shutdown attempt, before doing the signal dance. Tested-by: Steev Klimaszewski <steev@kali.org> Reviewed-by: Rishabh Bhatnagar <rishabhb@codeaurora.org> Link: https://lore.kernel.org/r/20201122054135.802935-4-bjorn.andersson@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-07-01remoteproc: qcom: Update PIL relocation info on loadBjorn Andersson
Update the PIL relocation information in IMEM with information about where the firmware for various remoteprocs are loaded. Reviewed-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20200622191942.255460-4-bjorn.andersson@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-05-12remoteproc: core: Prevent system suspend during remoteproc recoveryRishabh Bhatnagar
The system might go into suspend during recovery of any remoteproc. This will interrupt the recovery process in between increasing the recovery time. Make the platform device as wakeup capable and use pm_stay_wake/pm_relax APIs to avoid system from going into suspend during recovery. Signed-off-by: Siddharth Gupta <sidgup@codeaurora.org> Signed-off-by: Rishabh Bhatnagar <rishabhb@codeaurora.org> Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/1588183482-21146-1-git-send-email-rishabhb@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-05-12remoteproc: qcom: pas: Add SM8250 PAS remoteprocsBjorn Andersson
Add audio, compute and sensor DSP compatibles to the Qualcomm PAS binding and driver. Reviewed-by: Sibi Sankar <sibis@codeaurora.org> Link: https://lore.kernel.org/r/20200430180051.3795305-2-bjorn.andersson@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-05-11remoteproc: qcom: pas: Add SC7180 Modem supportSibi Sankar
Add support for booting the Modem DSP found on Qualcomm's SC7180 SoCs. Tested-by: Evan Green <evgreen@chromium.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Link: https://lore.kernel.org/r/20200421143228.8981-3-sibis@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-05-07remoteproc: qcom: Pass ssr_name to glink subdeviceBjorn Andersson
Pass ssr_name to glink subdevice in preparation for tying glink_ssr to the glink subdevice, rather than having its own "ssr subdevice". Acked-by: Chris Lew <clew@codeaurora.org> Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org> Acked-by: Rishabh Bhatnagar <rishabhb@codeaurora.org> Link: https://lore.kernel.org/r/20200423003736.2027371-2-bjorn.andersson@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-30 18:01:57 +0000