| Age | Commit message (Collapse) | Author |
|---|
|
[ Upstream commit ca46946a482238b0cdea459fb82fc837fb36260e ]
Failing to reset coupling_desc.n_coupled after freeing coupled_rdevs can
lead to NULL pointer dereference when regulators are accessed post-unbind.
This can happen during runtime PM or other regulator operations that rely
on coupling metadata.
For example, on ridesx4, unbinding the 'reg-dummy' platform device triggers
a panic in regulator_lock_recursive() due to stale coupling state.
Ensure n_coupled is set to 0 to prevent access to invalid pointers.
Signed-off-by: Alessandro Carminati <acarmina@redhat.com>
Link: https://patch.msgid.link/20250626083809.314842-1-acarmina@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8acfb165a492251a08a22a4fa6497a131e8c2609 ]
The datasheets for all the fan53555 variants (and clones using the same
interface) define so called soft start times, from enabling the regulator
until at least some percentage of the output (i.e. 92% for the rk860x
types) are available.
The regulator framework supports this with the enable_time property
but currently the fan53555 driver does not define enable_times for any
variant.
I ran into a problem with this while testing the new driver for the
Rockchip NPUs (rocket), which does runtime-pm including disabling and
enabling a rk8602 as needed. When reenabling the regulator while running
a load, fatal hangs could be observed while enabling the associated
power-domain, which the regulator supplies.
Experimentally setting the regulator to always-on, made the issue
disappear, leading to the missing delay to let power stabilize.
And as expected, setting the enable-time to a non-zero value
according to the datasheet also resolved the regulator-issue.
The datasheets in nearly all cases only specify "typical" values,
except for the fan53555 type 08. There both a typical and maximum
value are listed - 40uS apart.
For all typical values I've added 100uS to be on the safe side.
Individual details for the relevant regulators below:
- fan53526:
The datasheet for all variants lists a typical value of 150uS, so
make that 250uS with safety margin.
- fan53555:
types 08 and 18 (unsupported) are given a typical enable time of 135uS
but also a maximum of 175uS so use that value. All the other types only
have a typical time in the datasheet of 300uS, so give a bit margin by
setting it to 400uS.
- rk8600 + rk8602:
Datasheet reports a typical value of 260us, so use 360uS to be safe.
- syr82x + syr83x:
All datasheets report typical soft-start values of 300uS for these
regulators, so use 400uS.
- tcs452x:
Datasheet sadly does not report a soft-start time, so I've not set
an enable-time
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20250606190418.478633-1-heiko@sntech.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit c9764fd88bc744592b0604ccb6b6fc1a5f76b4e3 upstream.
drvdata::gpiods is supposed to hold an array of 'gpio_desc' pointers. But
the memory is allocated for only one pointer. This will lead to
out-of-bounds access later in the code if 'config::ngpios' is > 1. So
fix the code to allocate enough memory to hold 'config::ngpios' of GPIO
descriptors.
While at it, also move the check for memory allocation failure to be below
the allocation to make it more readable.
Cc: stable@vger.kernel.org # 5.0
Fixes: d6cd33ad7102 ("regulator: gpio: Convert to use descriptors")
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20250703103549.16558-1-mani@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 65271f868cb1dca709ff69e45939bbef8d6d0b70 upstream.
The function max14577_reg_get_current_limit() calls the function
max14577_read_reg(), but does not check its return value. A proper
implementation can be found in max14577_get_online().
Add a error check for the max14577_read_reg() and return error code
if the function fails.
Fixes: b0902bbeb768 ("regulator: max14577: Add regulator driver for Maxim 14577")
Cc: stable@vger.kernel.org # v3.14
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Link: https://patch.msgid.link/20250526025627.407-1-vulab@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e8ac7336dd62f0443a675ed80b17f0f0e6846e20 upstream.
The enable pin can be configured as always enabled by the hardware. Make
the enable gpio request optional so the driver doesn't fail to probe
when `enable-gpios` property is not present in the device tree.
Cc: stable@vger.kernel.org
Fixes: bfff546aae50 ("regulator: Add MAX20086-MAX20089 driver")
Signed-off-by: João Paulo Gonçalves <jpaulo.silvagoncalves@gmail.com>
Link: https://patch.msgid.link/20250420-fix-max20086-v1-2-8cc9ee0d5a08@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 71406b6d1155d883c80c1b4405939a52f723aa05 upstream.
>From MAX20086-MAX20089 datasheet, the id for a MAX20086 is 0x30 and not
0x40. With the current code, the driver will fail on probe when the
driver tries to identify the chip id from a MAX20086 device over I2C.
Cc: stable@vger.kernel.org
Fixes: bfff546aae50 ("regulator: Add MAX20086-MAX20089 driver")
Signed-off-by: João Paulo Gonçalves <jpaulo.silvagoncalves@gmail.com>
Link: https://patch.msgid.link/20250420-fix-max20086-v1-1-8cc9ee0d5a08@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 06118ae36855b7d3d22688298e74a766ccf0cb7a ]
There is a missing call to of_node_put() if devm_kcalloc() fails.
Fix this by changing the code to use cleanup.h magic to drop the
refcount.
Fixes: 6b0cd72757c6 ("regulator: max20086: fix invalid memory access")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/aDVRLqgJWMxYU03G@stanley.mountain
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5a6a461079decea452fdcae955bccecf92e07e97 ]
Previously, the ad5398 driver used only platform_data, which is
deprecated in favour of device tree. This caused the AD5398 to fail to
probe as it could not load its init_data. If the AD5398 has a device
tree node, pull the init_data from there using
of_get_regulator_init_data.
Signed-off-by: Isaac Scott <isaac.scott@ideasonboard.com>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Link: https://patch.msgid.link/20250128173143.959600-4-isaac.scott@ideasonboard.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6b0cd72757c69bc2d45da42b41023e288d02e772 ]
max20086_parse_regulators_dt() calls of_regulator_match() using an
array of struct of_regulator_match allocated on the stack for the
matches argument.
of_regulator_match() calls devm_of_regulator_put_matches(), which calls
devres_alloc() to allocate a struct devm_of_regulator_matches which will
be de-allocated using devm_of_regulator_put_matches().
struct devm_of_regulator_matches is populated with the stack allocated
matches array.
If the device fails to probe, devm_of_regulator_put_matches() will be
called and will try to call of_node_put() on that stack pointer,
generating the following dmesg entries:
max20086 6-0028: Failed to read DEVICE_ID reg: -121
kobject: '\xc0$\xa5\x03' (000000002cebcb7a): is not initialized, yet
kobject_put() is being called.
Followed by a stack trace matching the call flow described above.
Switch to allocating the matches array using devm_kcalloc() to
avoid accessing the stack pointer long after it's out of scope.
This also has the advantage of allowing multiple max20086 to probe
without overriding the data stored inside the global of_regulator_match.
Fixes: bfff546aae50 ("regulator: Add MAX20086-MAX20089 driver")
Signed-off-by: Cosmin Tanislav <demonsingur@gmail.com>
Link: https://patch.msgid.link/20250508064947.2567255-1-demonsingur@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
rk806_set_mode_dcdc()
[ Upstream commit 29c578c848402a34e8c8e115bf66cb6008b77062 ]
If 'ctr_bit' is negative, the shift counts become negative, causing a
shift of bounds and undefined behavior.
Presumably that's not possible in normal operation, but the code
generation isn't optimal. And undefined behavior should be avoided
regardless.
Improve code generation and remove the undefined behavior by converting
the signed variables to unsigned.
Fixes the following warning with an UBSAN kernel:
vmlinux.o: warning: objtool: rk806_set_mode_dcdc() falls through to next function rk806_get_mode_dcdc()
vmlinux.o: warning: objtool: .text.rk806_set_mode_dcdc: unexpected end of section
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Mark Brown <broonie@kernel.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/2023abcddf3f524ba478d64339996f25dc4097d2.1742852847.git.jpoimboe@kernel.org
Closes: https://lore.kernel.org/oe-kbuild-all/202503182350.52KeHGD4-lkp@intel.com/
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f5aab0438ef17f01c5ecd25e61ae6a03f82a4586 ]
The LDO5 regulator has two configuration registers, but only
LDO5CTRL_L contains the bits for enabling/disabling the regulator.
Fixes: 0935ff5f1f0a ("regulator: pca9450: add pca9450 pmic driver")
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Marek Vasut <marex@denx.de>
Link: https://patch.msgid.link/20241218152842.97483-6-frieder@fris.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 2c7a50bec4958f1d1c84d19cde518d0e96a676fd upstream.
Due to asynchronous driver probing there is a chance that the dummy
regulator hasn't already been probed when first accessing it.
Cc: stable@vger.kernel.org
Signed-off-by: Christian Eggers <ceggers@arri.de>
Link: https://patch.msgid.link/20250313103051.32430-3-ceggers@arri.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8619909b38eeebd3e60910158d7d68441fc954e9 upstream.
Sometimes I get a NULL pointer dereference at boot time in kobject_get()
with the following call stack:
anatop_regulator_probe()
devm_regulator_register()
regulator_register()
regulator_resolve_supply()
kobject_get()
By placing some extra BUG_ON() statements I could verify that this is
raised because probing of the 'dummy' regulator driver is not completed
('dummy_regulator_rdev' is still NULL).
In the JTAG debugger I can see that dummy_regulator_probe() and
anatop_regulator_probe() can be run by different kernel threads
(kworker/u4:*). I haven't further investigated whether this can be
changed or if there are other possibilities to force synchronization
between these two probe routines. On the other hand I don't expect much
boot time penalty by probing the 'dummy' regulator synchronously.
Cc: stable@vger.kernel.org
Fixes: 259b93b21a9f ("regulator: Set PROBE_PREFER_ASYNCHRONOUS for drivers that existed in 4.14")
Signed-off-by: Christian Eggers <ceggers@arri.de>
Link: https://patch.msgid.link/20250311091803.31026-1-ceggers@arri.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 155c569fa4c3b340fbf8571a0e42dd415c025377 ]
dev_err_probe() error messages need newline character.
Fixes: 6eabfc018e8d ("regulator: core: Allow specifying an initial load w/ the bulk API")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://patch.msgid.link/20250122072019.1926093-1-alexander.stein@ew.tq-group.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit dddca3b2fc676113c58b04aaefe84bfb958ac83e ]
of_regulator_match() does not release the OF node reference in the error
path, resulting in an OF node leak. Therefore, call of_node_put() on the
obtained nodes before returning the EINVAL error.
Since it is possible that some drivers call this function and do not
exit on failure, such as s2mps11_pmic_driver, clear the init_data and
of_node in the error path.
This was reported by an experimental verification tool that I am
developing. As I do not have access to actual devices nor the QEMU board
configuration to test drivers that call this function, no runtime test
was able to be performed.
Fixes: 1c8fa58f4750 ("regulator: Add generic DT parsing for regulators")
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Link: https://patch.msgid.link/20250104080453.2153592-1-joe@pf.is.s.u-tokyo.ac.jp
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f07ae52f5cf6a5584fdf7c8c652f027d90bc8b74 ]
AXP717 datasheet says that regulator ramp delay is 15.625 us/step,
which is 10mV in our case.
Add a AXP_DESC_RANGES_DELAY macro and update AXP_DESC_RANGES macro to
expand to AXP_DESC_RANGES_DELAY with ramp_delay = 0
For DCDC4, steps is 100mv
Add a AXP_DESC_DELAY macro and update AXP_DESC macro to
expand to AXP_DESC_DELAY with ramp_delay = 0
This patch fix crashes when using CPU DVFS.
Signed-off-by: Philippe Simons <simons.philippe@gmail.com>
Tested-by: Hironori KIKUCHI <kikuchan98@gmail.com>
Tested-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Fixes: d2ac3df75c3a ("regulator: axp20x: add support for the AXP717")
Link: https://patch.msgid.link/20241208124308.5630-1-simons.philippe@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit eeecf953d697cb7f0d916f9908a2b9f451bb2667 ]
All FTSMPS525 regulators support LV and MV ranges; however,
the boot loader firmware will determine which range to use as
the device boots.
Nonetheless, the driver cannot determine which range was selected,
so hardcoding the ranges as either LV or MV will not cover all cases
as it's possible for the firmware to select a range not supported by
the driver's current hardcoded values.
To this end, combine the ranges for the FTSMPS525s into one struct
and point all regulators to the updated combined struct. This should
work on all boards regardless of which range is selected by the firmware
and more accurately caputres the capability of this regulator on a
hardware level.
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patch.msgid.link/20241112002645.2803506-1-quic_molvera@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0d214f27c0e3d9694284c95bac1502c2d247355b ]
The rk808-regulator driver supports multiple PMIC variants from the Rockckip
RK80x and RK81x series, but the DVS GPIOs are supported on the RK808 variant
only, according to the DT bindings [1][2][3][4][5][6] and the datasheets for
the supported PMIC variants. [7][8][9][10][11][12]
Thus, change the probe path so the "dvs-gpios" property is checked for and
its value possibly used only when the handled PMIC variant is RK808. There's
no point in doing that on the other PMIC variants, because they don't support
the DVS GPIOs, and it goes against the DT bindings to allow a possible out-
of-place "dvs-gpios" property to actually be handled in the driver.
This eliminates the following messages, emitted when the "dvs-gpios" property
isn't found in the DT, from the kernel log on boards that actually don't use
the RK808 variant, which may have provided a source of confusion:
rk808-regulator rk808-regulator.2.auto: there is no dvs0 gpio
rk808-regulator rk808-regulator.2.auto: there is no dvs1 gpio
Furthermore, demote these kernel messages to debug messages, because they are
useful during the board bringup phase only. Emitting them afterwards, on the
boards that use the RK808 variant, but actually don't use the DVS0/1 GPIOs,
clutters the kernel log a bit, while they provide no value and may actually
cause false impression that some PMIC-related issues are present.
[1] Documentation/devicetree/bindings/mfd/rockchip,rk805.yaml
[2] Documentation/devicetree/bindings/mfd/rockchip,rk806.yaml
[3] Documentation/devicetree/bindings/mfd/rockchip,rk808.yaml
[4] Documentation/devicetree/bindings/mfd/rockchip,rk816.yaml
[5] Documentation/devicetree/bindings/mfd/rockchip,rk817.yaml
[6] Documentation/devicetree/bindings/mfd/rockchip,rk818.yaml
[7] https://rockchip.fr/RK805%20datasheet%20V1.2.pdf
[8] https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2401261533_Rockchip-RK806-1_C5156483.pdf
[9] https://rockchip.fr/RK808%20datasheet%20V1.4.pdf
[10] https://rockchip.fr/RK816%20datasheet%20V1.3.pdf
[11] https://rockchip.fr/RK817%20datasheet%20V1.01.pdf
[12] https://rockchip.fr/RK818%20datasheet%20V1.0.pdf
Fixes: 11375293530b ("regulator: rk808: Add regulator driver for RK818")
Reported-by: Diederik de Haas <didi.debian@cknow.org>
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Link: https://patch.msgid.link/9a415c59699e76fc7b88a2552520a4ca2538f44e.1728902488.git.dsimic@manjaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 18be43aca2c0ec475037923a8086d0a29fcc9d16 ]
Since smd_vreg_rpm is used only in
drivers/regulator/qcom_smd-regulator.c, make it static and fix the
following sparse warning:
drivers/regulator/qcom_smd-regulator.c:14:21: sparse: warning:
symbol 'smd_vreg_rpm' was not declared. Should it be static?
No functional changes intended.
Fixes: 5df3b41bd6b5 ("regulator: qcom_smd: Keep one rpm handle for all vregs")
Signed-off-by: Min-Hua Chen <minhuadotchen@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patch.msgid.link/20240926231038.31916-1-minhuadotchen@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
Currently, RK809's BUCK3 regulator is modelled in the driver as a
configurable regulator with 0.5-2.4V voltage range. But the voltage
setting is not actually applied, because when bit 6 of
PMIC_POWER_CONFIG register is set to 0 (default), BUCK3 output voltage
is determined by the external feedback resistor. Fix this, by setting
bit 6 when voltage selection is set. Existing users which do not
specify voltage constraints in their device trees will not be affected
by this change, since no voltage setting is applied in those cases,
and bit 6 is not enabled.
Signed-off-by: Mikhail Rudenko <mike.rudenko@gmail.com>
Link: https://patch.msgid.link/20241017-rk809-dcdc3-v1-1-e3c3de92f39c@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Fix rtq2208 driver uninitialized use to cause kernel error.
Fixes: 85a11f55621a ("regulator: rtq2208: Add Richtek RTQ2208 SubPMIC")
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Link: https://patch.msgid.link/00d691cfcc0eae9ce80a37b62e99851e8fdcffe2.1729829243.git.cy_huang@richtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This file does not compile because <linux/mfd/sm5703.h> is missing.
In KConfig, it depends on MFD_SM5703.
Both MFD_SM5703 and the missing include rely on another patch that never
got merged. The last iteration related to this patch is [1].
So remove this dead-code and undo commit e8858ba89ca3 ("regulator:
sm5703-regulator: Add regulators support for SM5703 MFD")
[1]: https://lore.kernel.org/lkml/20220423085319.483524-5-markuss.broks@gmail.com/
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://patch.msgid.link/0f5da91a05e7343d290c88e3c583b674cf6219ac.1725910247.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
_regulator_get() contains a lot of common code doing checks prior to the
regulator lookup and housekeeping work after the lookup. Almost all the
code could be shared with a OF-specific variant of _regulator_get().
Split out the common parts so that they can be reused. The OF-specific
version of _regulator_get() will be added in a subsequent patch.
No functional changes were made.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20240911072751.365361-4-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Some comments here are referring to a non-existent
regulator_ops::get_voltage_vsel() where ::get_voltage_sel() is meant,
and similar for ::set_voltage_vsel() / ::set_voltage_sel().
Update the comments.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://patch.msgid.link/20240913-regulator-typos-v1-1-92781c93f638@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use irq_get_trigger_type() to replace irq_get_irq_data() and then
irqd_get_trigger_type(), if the irq data is NULL it will return 0.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://patch.msgid.link/20240913013503.3754712-1-ruanjinjie@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The behavior of regulator_dev_lookup() for non-DT way has been broken
since the commit b8c325545714 ("regulator: Move OF-specific regulator
lookup code to of_regulator.c").
Before the commit, of_get_regulator() was used to get the regulator,
which returns NULL if the regulator is not found. So the regulator
will be looked up through regulator_lookup_by_name() if no matching
regulator is found in regulator_map_list.
However, currently, of_regulator_dev_lookup() is used to instead of
of_get_regulator(), but the variable 'r' is set to ERR_PTR(-ENODEV)
instead of NULL if the regulator is not found. In this case, if no
regulator is found in regulator_map_list, the variable 'r' is still
ERR_PTR(-ENODEV), So regulator_dev_lookup() returns the value of 'r'
directly instead of continuing to look up the regulator through
regulator_lookup_by_name().
Fixes: b8c325545714 ("regulator: Move OF-specific regulator lookup code to of_regulator.c")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20240911120338.526384-1-wei.fang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>:
Few cleanups (safer code), built tested. Last two patches should
probably be tested.
|
|
Switch from rdev_get_drvdata() to container_of(), so the static
'struct max77650_regulator_desc' holding 'struct regulator_desc' can
be made const for code safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240909-regulator-const-v1-17-8934704a5787@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Switch from rdev_get_drvdata() to container_of(), so the static
'struct hi6421v530_regulator_info' holding 'struct regulator_desc' can
be made const for code safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240909-regulator-const-v1-16-8934704a5787@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The hi6421v530_regulator_info.eco_microamp is assigned once and never
used again.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240909-regulator-const-v1-15-8934704a5787@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Driver does not modify static data with regulator description (struct
regulator_desc), so make it const for code safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240909-regulator-const-v1-14-8934704a5787@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Driver does not modify static data with regulator description (struct
pfuze_regulator), so make it const for code safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240909-regulator-const-v1-13-8934704a5787@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Driver does not modify static data with regulator description (struct
pcap_regulator), so make it const for code safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240909-regulator-const-v1-12-8934704a5787@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Driver does not modify static data with regulator description (struct
regulator_desc), so make it const for code safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240909-regulator-const-v1-11-8934704a5787@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Driver does not modify static data with regulator description (struct
regulator_desc), so make it const for code safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240909-regulator-const-v1-10-8934704a5787@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The max77826_regulator_info.rdesc is assigned once and never used again.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240909-regulator-const-v1-9-8934704a5787@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Driver does not modify static data with regulator description (struct
tps_driver_data), so make it const for code safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240909-regulator-const-v1-8-8934704a5787@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Driver does not modify static data with regulator description (struct
hi6421_spmi_reg_info), so make it const for code safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240909-regulator-const-v1-7-8934704a5787@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Driver does not modify static data with regulator description (struct
hi6421_regulator_info), so make it const for code safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240909-regulator-const-v1-6-8934704a5787@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Driver does not modify static data with regulator description (struct
da9121_range), so make it const for code safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240909-regulator-const-v1-4-8934704a5787@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Driver does not modify static data with device variant description
(struct da9063_dev_model), so make it const for code safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240909-regulator-const-v1-3-8934704a5787@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Driver does not modify static data with regulators description (struct
da9055_regulator_info), so make it const for code safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240909-regulator-const-v1-2-8934704a5787@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Driver does not modify static data with regulators description (struct
da9052_regulator_info), so make it const for code safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240909-regulator-const-v1-1-8934704a5787@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Fixed some confusing typographical errors:
comptabile->compatible,
asignment->assignment,
Verison->Version,
meansurement->measurement,
offets->offsets.
Signed-off-by: Yu Jiaoliang <yujiaoliang@vivo.com>
Link: https://patch.msgid.link/20240910064631.3223441-1-yujiaoliang@vivo.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
'struct regulator_desc' is not modified in this driver.
Constifying this structure moves some data to a read-only section, so
increases overall security, especially when the structure holds some
function pointers.
On a x86_64, with allmodconfig:
Before:
======
text data bss dec hex filename
4974 736 16 5726 165e drivers/regulator/tps6287x-regulator.o
After:
=====
text data bss dec hex filename
5294 416 16 5726 165e drivers/regulator/tps6287x-regulator.o
--
Compile tested only
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://patch.msgid.link/7727e493490d37775a653905dfe0cc1d8478f8e0.1725908163.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
'struct regulator_desc' is not modified in this driver.
Constifying this structure moves some data to a read-only section, so
increases overall security, especially when the structure holds some
function pointers.
On a x86_64, with allmodconfig:
Before:
======
text data bss dec hex filename
4419 2512 0 6931 1b13 drivers/regulator/wm8400-regulator.o
After:
=====
text data bss dec hex filename
6307 624 0 6931 1b13 drivers/regulator/wm8400-regulator.o
--
Compile tested only
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://patch.msgid.link/fde33ecfd9bbdbdc1da1620c9f3b1b7a72f9d805.1725906876.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
'struct regulator_desc' is not modified in this driver.
Constifying this structure moves some data to a read-only section, so
increase overall security, especially when the structure holds some
function pointers.
On a x86_64, with allmodconfig:
Before:
======
text data bss dec hex filename
13982 2118 16 16116 3ef4 drivers/regulator/da9211-regulator.o
After:
=====
text data bss dec hex filename
14622 1478 16 16116 3ef4 drivers/regulator/da9211-regulator.o
--
Compile tested only
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://patch.msgid.link/54258bfe11112d70d2f1eb1deda2791eb9ef99c1.1725784852.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
'struct regulator_desc' is not modified in this driver.
Constifying this structure moves some data to a read-only section, so
increase overall security, especially when the structure holds some
function pointers.
On a x86_64, with allmodconfig:
Before:
======
text data bss dec hex filename
3516 5320 32 8868 22a4 drivers/regulator/mp5416.o
After:
=====
text data bss dec hex filename
8508 320 32 8860 229c drivers/regulator/mp5416.o
--
Compile tested only
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://patch.msgid.link/fd8d1307f211ec7754f46b6678c04309556003bc.1725807320.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Andre Przywara <andre.przywara@arm.com>:
This is remainder of the AXP717 fix series, containing support for the
boost regulator. This is meant to increase the battery voltage to the 5
volts required to provide the USB VBUS power.
It's the usual trinity of DT bindings patch (1/3), the MFD part
describing the PMIC registers (2/3) and the final patch to model the
regulator (3/3).
Compared to v2, this drops the merged patches, and just retains the
boost related parts. It also changes the internal name of the register
to AXP717_MODULE_EN_CONTROL_2, since there is another control register
we will need later for battery support.
|
|
The AXP717 also contains an adjustable boost regulator, to provide the
5V USB VBUS rail when running on battery.
Add the regulator description that states the voltage range this
regulator can cover.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: John Watts <contact@jookia.org>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Link: https://patch.msgid.link/20240816001824.6028-4-andre.przywara@arm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
