| Age | Commit message (Collapse) | Author |
|---|
|
[ Upstream commit 37f7707077f5ea2515bf4b1dc7fad43f8e12993e ]
The hardware only supports a single period length for both PWM outputs. So
atmel_tcb_pwm_config() checks the configuration of the other output if it's
compatible with the currently requested setting. The register values are
then actually updated in atmel_tcb_pwm_enable(). To make this race free
the lock must be held during the whole process, so grab the lock in
.apply() instead of individually in atmel_tcb_pwm_disable() and
atmel_tcb_pwm_enable() which then also covers atmel_tcb_pwm_config().
To simplify handling, use the guard helper to let the compiler care for
unlocking. Otherwise unlocking would be more difficult as there is more
than one exit path in atmel_tcb_pwm_apply().
Fixes: 9421bade0765 ("pwm: atmel: add Timer Counter Block PWM driver")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20240709101806.52394-3-u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7346e7a058a2c9aa9ff1cc699c7bf18a402d9f84 ]
When the state changes from enabled to disabled, polarity, duty_cycle
and period are not configured in hardware and TIM_CCER_CCxE is just
cleared. However if the state changes from one disabled state to
another, all parameters are written to hardware because the early exit
from stm32_pwm_apply() is only taken if the pwm is currently enabled.
This yields surprises like: Applying
{ .period = 1, .duty_cycle = 0, .enabled = false }
succeeds if the pwm is initially on, but fails if it's already off
because 1 is a too small period.
Update the check for lazy disable to always exit early if the target
state is disabled, no matter what is currently configured.
Fixes: 7edf7369205b ("pwm: Add driver for STM32 plaftorm")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20240703110010.672654-2-u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit c45fcf46ca2368dafe7e5c513a711a6f0f974308 upstream.
If period_ns is small, prd might well become 0. Catch that case because
otherwise with
regmap_write(priv->regmap, TIM_ARR, prd - 1);
a few lines down quite a big period is configured.
Fixes: 7edf7369205b ("pwm: Add driver for STM32 plaftorm")
Cc: stable@vger.kernel.org
Reviewed-by: Trevor Gamblin <tgamblin@baylibre.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/b86f62f099983646f97eeb6bfc0117bb2d0c340d.1718979150.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit c748a6d77c06a78651030e17da6beb278a1c9470 ]
In order to introduce a pwm api which can be used from atomic context,
we will need two functions for applying pwm changes:
int pwm_apply_might_sleep(struct pwm *, struct pwm_state *);
int pwm_apply_atomic(struct pwm *, struct pwm_state *);
This commit just deals with renaming pwm_apply_state(), a following
commit will introduce the pwm_apply_atomic() function.
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> # for input
Acked-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Stable-dep-of: 974afccd3794 ("leds: pwm: Disable PWM when going to suspend")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5bb0b194aeee5d5da6881232f4e9989b35957c25 ]
Instead of of_clk_get_by_name() use devm_clk_get_prepared() which has
several advantages:
- Combines getting the clock and a call to clk_prepare(). The latter
can be dropped from sti_pwm_probe() accordingly.
- Cares for calling clk_put() which is missing in both probe's error
path and the remove function.
- Cares for calling clk_unprepare() which can be dropped from the error
paths and the remove function. (Note that not all error path got this
right.)
With additionally using devm_pwmchip_add() instead of pwmchip_add() the
remove callback can be dropped completely. With it the last user of
platform_get_drvdata() goes away and so platform_set_drvdata() can be
dropped from the probe function, too.
Fixes: 378fe115d19d ("pwm: sti: Add new driver for ST's PWM IP")
Link: https://lore.kernel.org/r/81f0e1d173652f435afda6719adaed1922fe059a.1710068192.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 54272761ce7c475fa30a31b59b0cb89f7652b39e ]
This prepares the driver for further changes that will drop struct
pwm_chip chip from struct sti_pwm_chip. Use the pwm_chip as driver data
instead of the sti_pwm_chip to get access to the pwm_chip in
sti_pwm_remove() without using pc->chip.
Link: https://lore.kernel.org/r/56d53372aacff6871df4d6c6779c9dac94592696.1707900770.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Stable-dep-of: 5bb0b194aeee ("pwm: sti: Simplify probe function using devm functions")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9eb05877dbee03064d3d3483cd6702f610d5a358 ]
22e8e19 has introduced a regression in the imgchip->pwm_clk lookup, whereas
the clock name has also been renamed to "imgchip". This causes the driver
failing to load:
[ 0.546905] img-pwm 18101300.pwm: failed to get imgchip clock
[ 0.553418] img-pwm: probe of 18101300.pwm failed with error -2
Fix this lookup by reverting the clock name back to "pwm".
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
Link: https://lore.kernel.org/r/20240320083602.81592-1-wigyori@uid0.hu
Fixes: 22e8e19a46f7 ("pwm: img: Rename variable pointing to driver private data")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5f623835584f1c8d1030666796f40c47a448ce0b ]
The driver only used the number of pwm channels to set the pwm_chip's
npwm member. The result is that if there are more capture channels than
PWM channels specified in the device tree, only a part of the capture
channel is usable. Fix that by passing the bigger channel count to the
pwm framework. This makes it possible that the .apply() callback is
called with .hwpwm >= pwm_num_devs, catch that case and return an error
code.
Fixes: c97267ae831d ("pwm: sti: Add PWM capture callback")
Link: https://lore.kernel.org/r/20240204212043.2951852-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e25ac87d3f831fed002c34aadddaf4ebb4ea45ec ]
The suspend callback disables the periph clock when the PWM is enabled
and resume reenables this clock if the PWM was disabled before. Judging
from the code comment it's suspend that is wrong here. Fix accordingly.
Fixes: f9bb9da7c09d ("pwm: atmel-hlcdc: Implement the suspend/resume hooks")
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Link: https://lore.kernel.org/r/b51ea92b0a45eff3dc83b08adefd43d930df996c.1706269232.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit a297d07b9a1e4fb8cda25a4a2363a507d294b7c9 upstream.
With args->args_count == 2 args->args[2] is not defined. Actually the
flags are contained in args->args[1].
Fixes: 3ab7b6ac5d82 ("pwm: Introduce single-PWM of_xlate function")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/243908750d306e018a3d4bf2eb745d53ab50f663.1704835845.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9320fc509b87b4d795fb37112931e2f4f8b5c55f upstream.
dev_err_probe() is only supposed to be used in probe functions. While it
probably doesn't hurt, both the EPROBE_DEFER handling and calling
device_set_deferred_probe_reason() are conceptually wrong in the request
callback. So replace the call by dev_err() and a separate return
statement.
This effectively reverts commit c0bfe9606e03 ("pwm: jz4740: Simplify
with dev_err_probe()").
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240106141302.1253365-2-u.kleine-koenig@pengutronix.de
Fixes: c0bfe9606e03 ("pwm: jz4740: Simplify with dev_err_probe()")
Cc: stable@vger.kernel.org
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 19f1016ea9600ed89bc24247c36ff5934ad94fbb ]
Make the driver take over hardware state without disabling in .probe()
and enable the clock for each enabled channel.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
[ukleinek: split off from a patch that also implemented .get_state()]
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Fixes: 7edf7369205b ("pwm: Add driver for STM32 plaftorm")
Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 41fa8f57c0d269243fe3bde2bce71e82c884b9ad ]
Use hweight32() to count the CCxE bits in stm32_pwm_detect_channels().
Since the return value is assigned to chip.npwm, change it to unsigned
int as well.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Stable-dep-of: 19f1016ea960 ("pwm: stm32: Fix enable count for clk in .probe()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e9bc4411548aaa738905d37851a0146c16b3bb21 ]
The suspend/resume functions currently utilize
clk_disable()/clk_enable() respectively which may be no-ops with certain
clock providers such as SCMI. Fix this to use clk_disable_unprepare()
and clk_prepare_enable() respectively as we should.
Fixes: 3a9f5957020f ("pwm: Add Broadcom BCM7038 PWM controller support")
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2d6812b41e0d832919d72c72ebddf361df53ba1b ]
Instead of using one allocation per capture channel, use a single one. Also
store it in driver data instead of chip data.
This has several advantages:
- driver data isn't cleared when pwm_put() is called
- Reduces memory fragmentation
Also register the pwm chip only after the per capture channel data is
initialized as the capture callback relies on this initialization and it
might be called even before pwmchip_add() returns.
It would be still better to have struct sti_pwm_compat_data and the
per-channel data struct sti_cpt_ddata in a single memory chunk, but that's
not easily possible because the number of capture channels isn't known yet
when the driver data struct is allocated.
Fixes: e926b12c611c ("pwm: Clear chip_data in pwm_put()")
Reported-by: George Stark <gnstark@sberdevices.ru>
Fixes: c97267ae831d ("pwm: sti: Add PWM capture callback")
Link: https://lore.kernel.org/r/20230705080650.2353391-7-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm updates from Thierry Reding:
"Various cleanups and fixes across the board"
* tag 'pwm/for-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (31 commits)
pwm: lpc32xx: Remove handling of PWM channels
pwm: atmel: Simplify using devm functions
dt-bindings: pwm: brcm,kona-pwm: convert to YAML
pwm: stmpe: Handle errors when disabling the signal
pwm: stm32: Simplify using devm_pwmchip_add()
pwm: stm32: Don't modify HW state in .remove() callback
pwm: Fix order of freeing resources in pwmchip_remove()
pwm: ntxec: Use device_set_of_node_from_dev()
pwm: ntxec: Drop a write-only variable from driver data
pwm: pxa: Don't reimplement of_device_get_match_data()
pwm: lpc18xx-sct: Simplify using devm_clk_get_enabled()
pwm: atmel-tcb: Don't track polarity in driver data
pwm: atmel-tcb: Unroll atmel_tcb_pwm_set_polarity() into only caller
pwm: atmel-tcb: Put per-channel data into driver data
pwm: atmel-tcb: Fix resource freeing in error path and remove
pwm: atmel-tcb: Harmonize resource allocation order
pwm: Drop unused #include <linux/radix-tree.h>
pwm: rz-mtu3: Fix build warning 'num_channel_ios' not described
pwm: Remove outdated documentation for pwmchip_remove()
pwm: atmel: Enable clk when pwm already enabled in bootloader
...
|
|
Because LPC32xx PWM controllers have only a single output which is
registered as the only PWM device/channel per controller, it is known in
advance that pwm->hwpwm value is always 0. On basis of this fact
simplify the code by removing operations with pwm->hwpwm, there is no
controls which require channel number as input.
Even though I wasn't aware at the time when I forward ported that patch,
this fixes a null pointer dereference as lpc32xx->chip.pwms is NULL
before devm_pwmchip_add() is called.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Fixes: 3d2813fb17e5 ("pwm: lpc32xx: Don't modify HW state in .probe() after the PWM chip was registered")
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
The new set of drivers for RZ/G2L MTU3a tries to enable compile-testing the
individual client drivers even when the MFD portion is disabled but gets it
wrong, causing a link failure when the core is in a loadable module but the
other drivers are built-in:
x86_64-linux-ld: drivers/pwm/pwm-rz-mtu3.o: in function `rz_mtu3_pwm_apply':
pwm-rz-mtu3.c:(.text+0x4bf): undefined reference to `rz_mtu3_8bit_ch_write'
x86_64-linux-ld: pwm-rz-mtu3.c:(.text+0x509): undefined reference to `rz_mtu3_disable'
arm-linux-gnueabi-ld: drivers/counter/rz-mtu3-cnt.o: in function `rz_mtu3_cascade_counts_enable_get':
rz-mtu3-cnt.c:(.text+0xbec): undefined reference to `rz_mtu3_shared_reg_read'
It seems better not to add the extra complexity here but instead just use
a normal hard dependency, so remove the #else portion in the header along
with the "|| COMPILE_TEST". This could also be fixed by having slightly more
elaborate Kconfig dependencies or using the cursed 'IS_REACHABLE()' helper,
but in practice it's already possible to compile-test all these drivers
by enabling the mtd portion.
Fixes: 254d3a727421c ("pwm: Add Renesas RZ/G2L MTU3a PWM driver")
Fixes: 0be8907359df4 ("counter: Add Renesas RZ/G2L MTU3a counter driver")
Fixes: 654c293e1687b ("mfd: Add Renesas RZ/G2L MTU3a core driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thierry Reding <thierry.reding@gmail.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20230719090430.1925182-1-arnd@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
For all resources used by the driver there is a devm variant to allocate
these. This simplifies the error path in the probe callback and allows
to drop the remove callback.
While at it also use dev_err_probe() to compact returning an error.
With the remove callback gone, there is no user of driver data left, so
the call to platform_set_drvdata() can also be dropped.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
Before the pwm framework implementedatomic updates (with the .apply()
callback) the .disable() callback returned void. This is still visible
in the stmpe driver which drops errors in the disable path.
Improve the driver to forward failures in stmpe_24xx_pwm_disable() to
the caller of pwm_apply_state().
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
This allows to drop the platform_driver's remove function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
A consumer is expected to disable a PWM before calling pwm_put(). And if
they didn't there is hopefully a good reason (or the consumer needs
fixing). Also if disabling an enabled PWM was the right thing to do,
this should better be done in the framework instead of in each low level
driver.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
pwmchip_add() calls of_pwmchip_add() only after adding the chip to
pwm_chips and releasing pwm_lock. So the proper order in
pwmchip_remove() is to call of_pwmchip_remove() before taking the mutex
and removing the chip from pwm_chips. This way pwmchip_remove() releases
the resources in reverse order compared to pwmchip_add() requesting
them.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
Compared to overwriting pdev->dev.of_node directly, this takes care of
reference counting. It also prevents that the parent device matches this
driver. See commit 9b22c17a3cc5 ("of: Check 'of_node_reused' flag on
of_match_device()") for further details.
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
.dev is assigned in .probe() and never read. So it serves no purpose and
can be removed.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
Apart from the return type pxa_pwm_get_id_dt() reimplements
of_device_get_match_data(). Drop the former and replace the call to it
by the latter.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
With devm_clk_get_enabled() the call to clk_disable_unprepare() can be
dropped from the error path and the remove callback.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
struct atmel_tcb_pwm_device::polarity is only used in atmel_tcb_pwm_enable
and atmel_tcb_pwm_disable(). These functions are only called by
atmel_tcb_pwm_apply() after the member variable was assigned to
state->polarity. So the value assigned in atmel_tcb_pwm_request() is
never used and the member can be dropped from struct atmel_tcb_pwm_device.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
atmel_tcb_pwm_set_polarity() is only called once and effectively wraps
an assignment only. Replace the function call by the respective
assignment.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
This simplifies the code, reduces the number of memory allocations and
pointer dereferences.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
Several resources were not freed in the error path and the remove
function. Add the forgotten items.
Fixes: 34cbcd72588f ("pwm: atmel-tcb: Add sama5d2 support")
Fixes: 061f8572a31c ("pwm: atmel-tcb: Switch to new binding")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
Allocate driver data as first resource in the probe function. This way it
can be used during allocation of the other resources (instead of assigning
these to local variables first and update driver data only when it's
allocated). Also as driver data is allocated using a devm function this
should happen first to have the order of freeing resources in the error
path and the remove function in reverse.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
core.c doens't use any of the symbols provided by linux/radix-tree.h
and compiles just fine without this include. So drop the #include.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
Fix the below build warning:
warning: Function parameter or member 'num_channel_ios' not described
in 'rz_mtu3_channel_io_map'
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
pwmchip_remove() returns void since some time but the documentation still
mentions the situations where it used to return an error code. Just remove
this old and now wrong text.
Fixes: 8083f58d08fd ("pwm: Make pwmchip_remove() return void")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
The driver would never call clk_enable() if the PWM channel was already
enabled in bootloader which lead to dump the warning message "the PWM
clock already disabled" when turning off the PWM channel.
Add atmel_pwm_enable_clk_if_on() in probe function to enable clock if
the PWM channel was already enabled in bootloader.
Signed-off-by: Guiting Shen <aarongt.shen@gmail.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
Nearly all PWM drivers use the name "chip" for the member in the driver
struct pointing to the pwm_chip. Also all local variables and function
parameters with this type use this name. Rename the struct pwm_chip
member accordingly for consistency.
Also rename the parameter of the macro sl28cpld_pwm_from_chip to "chip".
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
Most variables holding a pointer to a pwm_chip are called "chip" which
is also the usual name in most other PWM drivers. Rename the single
variable that have a different name to be called "chip", too, for
consistency.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
Most variables holding a pointer to a pwm_chip are called "chip" which
is also the usual name in most other PWM drivers. Rename the single
variable that have a different name to be called "chip", too, for
consistency.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
Most variables holding a pointer to a pwm_chip are called "chip" which
is also the usual name in most other PWM drivers. Rename the single
variable that have a different name to be called "chip", too, for
consistency.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
Most variables holding a pointer to a pwm_chip are called "chip" which
is also the usual name in most other PWM drivers. Rename the two
variables that have a different name to be called "chip", too, for
consistency.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
Most variables holding a pointer to a pwm_chip are called "chip" which
is also the usual name in most other PWM drivers. Rename the single
variable that have a different name to be called "chip", too, for
consistency.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
Most variables holding a pointer to a pwm_chip are called "chip" which
is also the usual name in most other PWM drivers. Rename the single
variable that have a different name to be called "chip", too, for
consistency.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
In PWM drivers the variable name "chip" is usually only used for struct
pwm_chip pointers. This driver however used "chip" for its driver data
and pwm_chip pointers are named "chip", too, when there is no driver
data around and "c" otherwise. Instead use "atmel" for driver data and
always "chip" for pwm_chips.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
[thierry.reding@gmail.com: replace ddata by atmel]
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
Most variables of type struct pwm_chip * are named "chip", there are
only three outliers called "pc". Change these three to "chip", too, for
consistency.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm updates from Thierry Reding:
"There's a little bit of everything in here: we've got various
improvements and cleanups to drivers, some fixes across the board and
a bit of new hardware support"
* tag 'pwm/for-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (22 commits)
dt-bindings: pwm: convert pwm-bcm2835 bindings to YAML
pwm: Add Renesas RZ/G2L MTU3a PWM driver
pwm: mtk_disp: Fix the disable flow of disp_pwm
dt-bindings: pwm: restrict node name suffixes
pwm: pca9685: Switch i2c driver back to use .probe()
pwm: ab8500: Fix error code in probe()
MAINTAINERS: add pwm to PolarFire SoC entry
pwm: add microchip soft ip corePWM driver
pwm: sysfs: Do not apply state to already disabled PWMs
pwm: imx-tpm: force 'real_period' to be zero in suspend
pwm: meson: make full use of common clock framework
pwm: meson: don't use hdmi/video clock as mux parent
pwm: meson: switch to using struct clk_parent_data for mux parents
pwm: meson: remove not needed check in meson_pwm_calc
pwm: meson: fix handling of period/duty if greater than UINT_MAX
pwm: meson: modify and simplify calculation in meson_pwm_get_state
dt-bindings: pwm: Add R-Car V3U device tree bindings
dt-bindings: pwm: imx: add i.MX8QXP compatible
pwm: mediatek: Add support for MT7981
dt-bindings: pwm: mediatek: Add mediatek,mt7981 compatible
...
|
|
The RZ/G2L Multi-Function Timer Pulse Unit 3 (a.k.a MTU3a) uses
one counter and two match components to configure duty_cycle
and period to generate PWM output waveform.
Add basic support for RZ/G2L MTU3a PWM driver by creating separate
PWM channels for each IOs.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
There is a flow error in the original mtk_disp_pwm_apply() function.
If this function is called when the clock is disabled, there will be a
chance to operate the disp_pwm register, resulting in disp_pwm exception.
Fix this accordingly.
Fixes: 888a623db5d0 ("pwm: mtk-disp: Implement atomic API .apply()")
Signed-off-by: Shuijing Li <shuijing.li@mediatek.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Tested-by: Fei Shao <fshao@chromium.org>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
After commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new()
call-back type"), all drivers being converted to .probe_new() and then
03c835f498b5 ("i2c: Switch .probe() to not take an id parameter")
convert back to (the new) .probe() to be able to eventually drop
.probe_new() from struct i2c_driver.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
