Age | Commit message (Collapse) | Author |
|
Calling power_supply_get_property() inside
dell_wmi_ddv_battery_translate() can cause a deadlock since this
function is also being called from the power supply extension code,
in which case psy->extensions_sem is already being held.
Fix this by using the new power_supply_get_property_direct() function
to ignore any power supply extensions when retrieving the battery
serial number.
Tested on a Dell Inspiron 3505.
Reported-by: Hans de Goede <hansg@kernel.org>
Fixes: 058de163a376 ("platform/x86: dell-ddv: Implement the battery matching algorithm")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20250627205124.250433-3-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add missing empty member to `awcc_dmi_table`.
Cc: stable@vger.kernel.org
Fixes: 6d7f1b1a5db6 ("platform/x86: alienware-wmi: Split DMI table")
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Link: https://lore.kernel.org/r/20250707-dmi-fix-v1-1-6730835d824d@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform drivers fixes from Ilpo Järvinen:
"Mostly a few lines fixed here and there except amd/isp4 which improves
swnodes relationships but that is a new driver not in any stable
kernels yet. The think-lmi driver changes also look relatively large
but there are just many fixes to it.
The i2c/piix4 change is a effectively a revert of the commit
7e173eb82ae9 ("i2c: piix4: Make CONFIG_I2C_PIIX4 dependent on
CONFIG_X86") but that required moving the header out from arch/x86
under include/linux/platform_data/
Summary:
- amd/isp4: Improve swnode graph (new driver exception)
- asus-nb-wmi: Use duo keyboard quirk for Zenbook Duo UX8406CA
- dell-lis3lv02d: Add Latitude 5500 accelerometer address
- dell-wmi-sysman: Fix WMI data block retrieval and class dev unreg
- hp-bioscfg: Fix class device unregistration
- i2c: piix4: Re-enable on non-x86 + move FCH header under platform_data/
- intel/hid: Wildcat Lake support
- mellanox:
- mlxbf-pmc: Fix duplicate event ID
- mlxbf-tmfifo: Fix vring_desc.len assignment
- mlxreg-lc: Fix bit-not-set logic check
- nvsw-sn2201: Fix bus number in error message & spelling errors
- portwell-ec: Move watchdog device under correct platform hierarchy
- think-lmi: Error handling fixes (sysfs, kset, kobject, class dev unreg)
- thinkpad_acpi: Handle HKEY 0x1402 event (2025 Thinkpads)
- wmi: Fix WMI event enablement"
* tag 'platform-drivers-x86-v6.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (22 commits)
platform/x86: think-lmi: Fix sysfs group cleanup
platform/x86: think-lmi: Fix kobject cleanup
platform/x86: think-lmi: Create ksets consecutively
platform/mellanox: mlxreg-lc: Fix logic error in power state check
i2c: Re-enable piix4 driver on non-x86
Move FCH header to a location accessible by all archs
platform/x86/intel/hid: Add Wildcat Lake support
platform/x86: dell-wmi-sysman: Fix class device unregistration
platform/x86: think-lmi: Fix class device unregistration
platform/x86: hp-bioscfg: Fix class device unregistration
platform/x86: Update swnode graph for amd isp4
platform/x86: dell-wmi-sysman: Fix WMI data block retrieval in sysfs callbacks
platform/x86: wmi: Update documentation of WCxx/WExx ACPI methods
platform/x86: wmi: Fix WMI event enablement
platform/mellanox: nvsw-sn2201: Fix bus number in adapter error message
platform/mellanox: Fix spelling and comment clarity in Mellanox drivers
platform/mellanox: mlxbf-pmc: Fix duplicate event ID for CACHE_DATA1
platform/x86: thinkpad_acpi: handle HKEY 0x1402 event
platform/x86: asus-nb-wmi: add DMI quirk for ASUS Zenbook Duo UX8406CA
platform/x86: dell-lis3lv02d: Add Latitude 5500
...
|
|
Adds a KUNIT test for the intel_pmt_get_regions_by_feature() API.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20250703022832.1302928-16-david.e.box@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
feature
Introduce a new API, intel_pmt_get_regions_by_feature(), that gathers
telemetry regions based on a provided capability flag. This API enables
retrieval of regions with various capabilities (for example, RMID-based
telemetry) and provides a unified interface for accessing them. Resource
management is handled via reference counting using
intel_pmt_put_feature_group().
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20250703022832.1302928-15-david.e.box@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add intel_pmt_get_features() in PMT Discovery to enable the PMT Telemetry
driver to obtain attributes of the aggregated telemetry spaces it
enumerates. The function gathers feature flags and associated data (like
the number of RMIDs) from each PMT entry, laying the groundwork for a
future kernel interface that will allow direct access to telemetry regions
based on their capabilities.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20250703022832.1302928-14-david.e.box@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Copy TPMI’s OOBMSM platform info into a common area within VSEC private
data via intel_vsec_set_mapping(). This enables other Intel VSEC features
to access the CPU mapping without additional queries.
Additionally, designate the TPMI driver as a supplier for the Telemetry
driver, ensuring it can obtain the necessary platform information for
future feature extensions.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20250703022832.1302928-13-david.e.box@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add functions, intel_vsec_set/get_mapping(), to set and retrieve the
OOBMSM-to-CPU mapping data in the private data of the parent Intel VSEC
driver. With this mapping information available, other Intel VSEC features
on the same OOBMSM device can easily access and use the mapping data,
allowing each of the OOBMSM features to map to the CPUs they provides data
for.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20250703022832.1302928-12-david.e.box@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The TPMI platform information provides a mapping of OOBMSM PCI devices to
logical CPUs. Since this mapping is consistent across all OOBMSM features
(e.g., TPMI, PMT, SDSi), it can be leveraged by multiple drivers. To
facilitate reuse, relocate the struct intel_tpmi_plat_info to intel_vsec.h,
renaming it to struct oobmsm_plat_info, making it accessible to other
features. While modifying headers, place them in alphabetical order.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20250703022832.1302928-11-david.e.box@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
This patch introduces a new driver to enumerate and expose Intel Platform
Monitoring Technology (PMT) capabilities via a simple discovery mechanism.
The PMT Discovery driver parses hardware-provided discovery tables from
Intel Out of Band Management Services Modules (OOBMSM) and extracts feature
information for various providers (such as TPMI, Telemetry, Crash Log,
etc). This unified interface simplifies the process of determining which
manageability and telemetry features are supported by a given platform.
This new feature is described in the Intel Platform Monitoring Technology
3.0 specification, section 6.6 Capability.
Key changes and additions:
New file drivers/platform/x86/intel/pmt/discovery.c:
– Implements the discovery logic to map the discovery resource, read
the feature discovery table, and validate feature parameters.
New file drivers/platform/x86/intel/pmt/features.c:
– Defines feature names, layouts, and associated capability masks.
– Provides a mapping between raw hardware attributes and sysfs
representations for easier integration with user-space tools.
New header include/linux/intel_pmt_features.h:
– Declares constants, masks, and feature identifiers used across the
PMT framework.
Sysfs integration:
– Feature attributes are exposed under /sys/class/intel_pmt.
– Each device is represented by a subfolder within the intel_pmt class,
named using its DBDF (Domain:Bus:Device.Function), e.g.:
features-0000:00:03.1
– Example directory layout for a device:
/sys/class/intel_pmt/features-0000:00:03.1/
├── accelerator_telemetry
├── crash_log
├── per_core_environment_telemetry
├── per_core_performance_telemetry
├── per_rmid_energy_telemetry
├── per_rmid_perf_telemetry
├── tpmi_control
├── tracing
└── uncore_telemetry
By exposing PMT feature details through sysfs and integrating with the
existing PMT class, this driver paves the way for more streamlined
integration of PMT-based manageability and telemetry tools.
Link: https://www.intel.com/content/www/us/en/content-details/710389/intel-platform-monitoring-technology-intel-pmt-external-specification.html
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20250703022832.1302928-9-david.e.box@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add the PCIe VSEC ID for new Intel Platform Monitoring Technology
Capability Discovery feature. Discovery provides detailed information for
the various Intel VSEC features. Also make the driver a supplier for
TPMI and Telemetry drivers which will use the information.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20250703022832.1302928-8-david.e.box@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
If a feature lacks a corresponding driver and that feature is also a
supplier, registering it would be prevent the consumer driver from probing.
Introduces logic to skip such features during device registration.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20250703022832.1302928-7-david.e.box@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Some VSEC features depend on the presence of supplier features that may not
always be present. To prevent unnecessary retries and device linking during
initialization, introduce logic to skip attempts to link consumers to
missing suppliers.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20250703022832.1302928-6-david.e.box@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
New Intel VSEC features will have dependencies on other features, requiring
certain supplier drivers to be probed before their consumers. To enforce
this dependency ordering, introduce device links using device_link_add(),
ensuring that suppliers are fully registered before consumers are probed.
- Add device link tracking by storing supplier devices and tracking their
state.
- Implement intel_vsec_link_devices() to establish links between suppliers
and consumers based on feature dependencies.
- Add get_consumer_dependencies() to retrieve supplier-consumer
relationships.
- Modify feature registration logic:
* Consumers now check that all required suppliers are registered before
being initialized.
* suppliers_ready() verifies that all required supplier devices are
available.
- Prevent potential null consumer name issue in sysfs:
- Use dev_set_name() when creating auxiliary devices to ensure a
unique, non-null consumer name.
- Update intel_vsec_pci_probe() to loop up to the number of possible
features or when all devices are registered, whichever comes first.
- Introduce VSEC_CAP_UNUSED to prevent sub-features (registered via
exported APIs) from being mistakenly linked.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20250703022832.1302928-5-david.e.box@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Combine three PCI config space walkers — intel_vsec_walk_dvsec(),
intel_vsec_walk_vsec(), and intel_vsec_walk_header() — into a new wrapper
function, intel_vsec_feature_walk(). This refactoring simplifies the probe
logic and lays the groundwork for future patches that will loop over these
calls. No functional changes.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20250703022832.1302928-4-david.e.box@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Introduce a new private structure, struct vsec_priv, to hold a pointer to
the platform-specific information. Although the driver didn’t previously
require this per-device data, adding it now lays the groundwork for
upcoming patches that will manage such data. No functional changes.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20250703022832.1302928-3-david.e.box@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Adds lenovo-wmi-other driver which provides the Lenovo "Other Mode" WMI
interface that comes on some Lenovo "Gaming Series" hardware. Provides a
firmware-attributes class which enables the use of tunable knobs for SPL,
SPPT, and FPPT.
Reviewed-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
Link: https://lore.kernel.org/r/20250702033826.1057762-7-derekjohn.clark@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Adds lenovo-wmi-gamezone driver which provides the Lenovo Gamezone WMI
interface that comes on Lenovo "Gaming Series" hardware. Provides ACPI
platform profiles over WMI.
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
Link: https://lore.kernel.org/r/20250702033826.1057762-6-derekjohn.clark@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Adds lenovo-wmi-capdata01 driver which provides the
LENOVO_CAPABILITY_DATA_01 WMI data block that comes on "Other Mode"
enabled hardware. Provides an interface for querying if a given
attribute is supported by the hardware, as well as its default_value,
max_value, min_value, and step increment.
Reviewed-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
Link: https://lore.kernel.org/r/20250702033826.1057762-5-derekjohn.clark@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Adds lenovo-wmi-events driver. The events driver is designed as a
general entrypoint for all Lenovo WMI Events. It acts as a notification
chain head that will process event data and pass it on to registered
drivers so they can react to the events.
Currently only the Gamezone interface Thermal Mode Event GUID is
implemented in this driver. It is documented in the Gamezone
documentation.
Suggested-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
Link: https://lore.kernel.org/r/20250702033826.1057762-4-derekjohn.clark@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Adds lenovo-wmi-helpers, which provides a common wrapper function for
wmidev_evaluate_method that does data validation and error handling.
Reviewed-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
Link: https://lore.kernel.org/r/20250702033826.1057762-3-derekjohn.clark@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Merge fixes back into for-next to be able to take dell_rbu change that
is build on top of fixes material, and to bring lenovo related changes
in sync after the move under lenovo/ subdir in the for-next branch and
diverging changes in the fixes branch.
|
|
Many error paths in tlmi_sysfs_init() lead to sysfs groups being removed
when they were not even created.
Fix this by letting the kobject core manage these groups through their
kobj_type's defult_groups.
Fixes: a40cd7ef22fb ("platform/x86: think-lmi: Add WMI interface support on Lenovo platforms")
Cc: stable@vger.kernel.org
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250630-lmi-fix-v3-3-ce4f81c9c481@gmail.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
In tlmi_analyze(), allocated structs with an embedded kobject are freed
in error paths after the they were already initialized.
Fix this by first by avoiding the initialization of kobjects in
tlmi_analyze() and then by correctly cleaning them up in
tlmi_release_attr() using their kset's kobject list.
Fixes: a40cd7ef22fb ("platform/x86: think-lmi: Add WMI interface support on Lenovo platforms")
Fixes: 30e78435d3bf ("platform/x86: think-lmi: Split kobject_init() and kobject_add() calls")
Cc: stable@vger.kernel.org
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250630-lmi-fix-v3-2-ce4f81c9c481@gmail.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Avoid entering tlmi_release_attr() in error paths if both ksets are not
yet created.
This is accomplished by initializing them side by side.
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250630-lmi-fix-v3-1-ce4f81c9c481@gmail.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
DEFINE_RES_*() are compound literals, and hence no need to do that explicitly.
Besides that, we have no IRQ name provided, no need to use _NAMED() variant.
Replace open coded variant of DEFINE_RES_IRQ().
No functional changes intended.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250630101745.1855918-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
|
|
fwnode_remove_software_node() is aware of invalid input,
no need to perform checks in the caller.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250630101225.1855431-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
|
|
Fixes a logic issue in mlxreg_lc_completion_notify() where the
intention was to check if MLXREG_LC_POWERED flag is not set before
powering on the device.
The original code used "state & ~MLXREG_LC_POWERED" to check for the
absence of the POWERED bit. However this condition evaluates to true
even when other bits are set, leading to potentially incorrect
behavior.
Corrected the logic to explicitly check for the absence of
MLXREG_LC_POWERED using !(state & MLXREG_LC_POWERED).
Fixes: 62f9529b8d5c ("platform/mellanox: mlxreg-lc: Add initial support for Nvidia line card devices")
Suggested-by: Vadim Pasternak <vadimp@nvidia.com>
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Link: https://lore.kernel.org/r/20250630105812.601014-1-alok.a.tiwari@oracle.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
A new header fch.h was created to store registers used by different AMD
drivers. This header was included by i2c-piix4 in
commit 624b0d5696a8 ("i2c: piix4, x86/platform: Move the SB800 PIIX4 FCH
definitions to <asm/amd/fch.h>"). To prevent compile failures on non-x86
archs i2c-piix4 was set to only compile on x86 by commit 7e173eb82ae9717
("i2c: piix4: Make CONFIG_I2C_PIIX4 dependent on CONFIG_X86").
This was not a good decision because loongarch and mips both actually
support i2c-piix4 and set it enabled in the defconfig.
Move the header to a location accessible by all architectures.
Fixes: 624b0d5696a89 ("i2c: piix4, x86/platform: Move the SB800 PIIX4 FCH definitions to <asm/amd/fch.h>")
Suggested-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Link: https://lore.kernel.org/r/20250610205817.3912944-1-superm1@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add ovc-capacity-table info to the generic battery nodes.
The values come from the ug3105 driver which currently hardcodes these
values. The ug3105 driver will be modified to stop hardcoding this and
instead get the values from device-properties.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hansg@kernel.org>
Link: https://lore.kernel.org/r/20250609104620.25896-2-hansg@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Move the asus_tf103c_battery_node to shared-psy-info.c and rename it to
generic_lipo_4v2_battery_node.
This is a preparation patch for adding ovc-capacity-table info to
the battery nodes.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hansg@kernel.org>
Link: https://lore.kernel.org/r/20250609104620.25896-1-hansg@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add ACPI ID for Wildcat Lake.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20250617232913.3314765-1-srinivas.pandruvada@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Devices under the firmware_attributes_class do not have unique a dev_t.
Therefore, device_unregister() should be used instead of
device_destroy(), since the latter may match any device with a given
dev_t.
Fixes: e8a60aa7404b ("platform/x86: Introduce support for Systems Management Driver over WMI for Dell Systems")
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250625-dest-fix-v1-3-3a0f342312bb@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Devices under the firmware_attributes_class do not have unique a dev_t.
Therefore, device_unregister() should be used instead of
device_destroy(), since the latter may match any device with a given
dev_t.
Fixes: a40cd7ef22fb ("platform/x86: think-lmi: Add WMI interface support on Lenovo platforms")
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250625-dest-fix-v1-2-3a0f342312bb@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Devices under the firmware_attributes_class do not have unique a dev_t.
Therefore, device_unregister() should be used instead of
device_destroy(), since the latter may match any device with a given
dev_t.
Fixes: a34fc329b189 ("platform/x86: hp-bioscfg: bioscfg")
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250625-dest-fix-v1-1-3a0f342312bb@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Existing swnode graph format is specific to sensor device
and is causing conflicts when accessing standard property
variables outside the sensor driver.
To address this issue, enhanced swnode graph format with
dedicated nodes for i2c and isp devices, with sensor node
added as child to i2c node. This approach allows to have
standard property variables (ex: 'clock-frequency') with
values applicable for each of the devices (sensor, i2c and
isp).
ACPI device driver_data handle is also initialized with root
camera swnode to access the property variables in the graph
in isp and i2c drivers.
Signed-off-by: Pratap Nirujogi <pratap.nirujogi@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20250618202958.3934822-1-pratap.nirujogi@amd.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
After retrieving WMI data blocks in sysfs callbacks, check for the
validity of them before dereferencing their content.
Reported-by: Jan Graczyk <jangraczyk@yahoo.ca>
Closes: https://lore.kernel.org/r/CAHk-=wgMiSKXf7SvQrfEnxVtmT=QVQPjJdNjfm3aXS7wc=rzTw@mail.gmail.com/
Fixes: e8a60aa7404b ("platform/x86: Introduce support for Systems Management Driver over WMI for Dell Systems")
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250630-sysman-fix-v2-1-d185674d0a30@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
It turns out that the Windows WMI-ACPI driver always enables/disables
WMI events regardless of whether they are marked as expensive or not.
This finding is further reinforced when reading the documentation of
the WMI_FUNCTION_CONTROL_CALLBACK callback used by Windows drivers
for enabling/disabling WMI devices:
The DpWmiFunctionControl routine enables or disables
notification of events, and enables or disables data
collection for data blocks that the driver registered
as expensive to collect.
Follow this behavior to fix the WMI event used for reporting hotkey
events on the Dell Latitude 5400 and likely many more devices.
Reported-by: Dmytro Bagrii <dimich.dmb@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220246
Tested-by: Dmytro Bagrii <dimich.dmb@gmail.com>
Fixes: 656f0961d126 ("platform/x86: wmi: Rework WCxx/WExx ACPI method handling")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20250619221440.6737-1-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
change error log to use correct bus number from main_mux_devs
instead of cpld_devs.
Fixes: 662f24826f95 ("platform/mellanox: Add support for new SN2201 system")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20250622072921.4111552-2-alok.a.tiwari@oracle.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
This commit corrects several minor typographical errors in comments
and error messages across multiple Mellanox platform driver.
Fixed spelling of "thresholds", "region", "platform", "default",
and removed redundant spaces in comment strings and error logs.
These changes are cosmetic and do not affect runtime behavior.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: David Thompson <davthompson@nvidia.com>
Link: https://lore.kernel.org/r/20250622072921.4111552-1-alok.a.tiwari@oracle.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Use adapater->name inplace of adapter->owner->name to fix
build issues when CONFIG_MODULES is not defined.
Fixes: 90b85567e457 ("platform/x86: Add AMD ISP platform config for OV05C10")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/all/04577a46-9add-420c-b181-29bad582026d@infradead.org
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Pratap Nirujogi <pratap.nirujogi@amd.com>
Requires: 942e1aece13e ("i2c: designware: Initialize adapter name only when not set"
Requires: c8dc57916973 ("i2c: amd-isp: Initialize unique adapter name")
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250609155601.1477055-4-pratap.nirujogi@amd.com
|
|
same ID (103) was assigned to both GDC_BANK0_G_RSE_PIPE_CACHE_DATA0
and GDC_BANK0_G_RSE_PIPE_CACHE_DATA1. This could lead to incorrect
event mapping.
Updated the ID to 104 to ensure uniqueness.
Fixes: 423c3361855c ("platform/mellanox: mlxbf-pmc: Add support for BlueField-3")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: David Thompson <davthompson@nvidia.com>
Link: https://lore.kernel.org/r/20250619060502.3594350-1-alok.a.tiwari@oracle.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
2025 Thinkpads F11 key launch the Intel Unison app on Windows,
which does some sort of smart sharing between laptop and phone.
Map this key event to KEY_LINK_PHONE as the closest thing we have.
This prevents an error message being displayed on key press.
Reported-by: Damjan Georgievski <gdamjan@gmail.com>
Closes: https://sourceforge.net/p/ibm-acpi/mailman/message/59189556/
Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20250620181119.2519546-1-mpearson-lenovo@squebb.ca
[ij: converted directory to pre-lenovo move as this is fixes material.]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add a DMI quirk entry for the ASUS Zenbook Duo UX8406CA 2025 model to use
the existing zenbook duo keyboard quirk.
Signed-off-by: Rahul Chandra <rahul@chandra.net>
Link: https://lore.kernel.org/r/20250624073301.602070-1-rahul@chandra.net
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add 0x29 as the accelerometer address for the Dell Latitude 5500 to
lis3lv02d_devices[].
The address was verified as below:
$ cd /sys/bus/pci/drivers/i801_smbus/0000:00:1f.4
$ ls -d i2c-?
i2c-2
$ sudo modprobe i2c-dev
$ sudo i2cdetect 2
WARNING! This program can confuse your I2C bus, cause data loss and worse!
I will probe file /dev/i2c-2.
I will probe address range 0x08-0x77.
Continue? [Y/n] Y
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: 08 -- -- -- -- -- -- --
10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
20: -- -- -- -- -- -- -- -- -- 29 -- -- -- -- -- --
30: 30 -- -- -- -- 35 UU UU -- -- -- -- -- -- -- --
40: -- -- -- -- 44 -- -- -- -- -- -- -- -- -- -- --
50: UU -- 52 -- -- -- -- -- -- -- -- -- -- -- -- --
60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
70: -- -- -- -- -- -- -- --
$ echo lis3lv02d 0x29 | sudo tee /sys/bus/i2c/devices/i2c-2/new_device
lis3lv02d 0x29
$ sudo dmesg
[ 0.000000] Linux version 6.12.32-amd64 (debian-kernel@lists.debian.org) (x86_64-linux-gnu-gcc-14 (Debian 14.2.0-19) 14.2.0, GNU ld (GNU Binutils for Debian) 2.44) #1 SMP PREEMPT_DYNAMIC Debian 6.12.32-1 (2025-06-07)
[…]
[ 0.000000] DMI: Dell Inc. Latitude 5500/0M14W7, BIOS 1.38.0 03/06/2025
[…]
[ 609.063488] i2c_dev: i2c /dev entries driver
[ 639.135020] i2c i2c-2: new_device: Instantiated device lis3lv02d at 0x29
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Link: https://lore.kernel.org/r/20250622080721.4661-1-pmenzel@molgen.mpg.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
When the EC/ISH starts, it can take a while for all the sensors to be up
and running or declared broken.
If the sensor stack return -EBUSY when checking for sensor information,
retry up to 50 times.
It has been observed 100ms wait time is enough to have valid sensors
ready. It can take more time in case a sensor is really broken and is
not coming up.
Signed-off-by: Gwendal Grignou <gwendal@google.com>
Link: https://lore.kernel.org/r/20250623210518.306740-1-gwendal@google.com
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
|
|
We need the driver-core fixes that are in 6.16-rc3 into here as well
to build on top of.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
On ChromiumOS devices, the `ecc_size` is set to 0 (check dmesg | grep ecc
to see `ecc: 0`): this disables ECC for ramoops region, even when
`ramoops.ecc=1` is given to kernel command line parameter.
Introduce `ecc_size` module parameter to provide a method to turn on ECC
for ramoops and set different values of ecc_size per devices.
A large `ecc_size` value can cause a kernel panic due to a constraint in
Reed-Solomon code library. The validation for this constraint should
belong to the common pstore RAM layer, not in each individual driver. So
this check is handled by a separate patch [1].
[1] https://lore.kernel.org/lkml/20250620054757.1006729-1-naoyatezuka@chromium.org
Signed-off-by: Naoya Tezuka <naoyatezuka@chromium.org>
Link: https://lore.kernel.org/r/20250620062822.1018798-1-naoyatezuka@chromium.org
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Marek Behún <kabel@kernel.org>
Link: https://lore.kernel.org/r/20250610-gpiochip-set-rv-platform-cznic-v1-1-30afd2444756@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Fix warnings reported by sparse, related to incorrect type:
drivers/platform/mellanox/mlxbf-tmfifo.c:284:38: warning: incorrect type in assignment (different base types)
drivers/platform/mellanox/mlxbf-tmfifo.c:284:38: expected restricted __virtio32 [usertype] len
drivers/platform/mellanox/mlxbf-tmfifo.c:284:38: got unsigned long
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202404040339.S7CUIgf3-lkp@intel.com/
Fixes: 78034cbece79 ("platform/mellanox: mlxbf-tmfifo: Drop the Rx packet if no more descriptors")
Signed-off-by: David Thompson <davthompson@nvidia.com>
Link: https://lore.kernel.org/r/20250613214608.2250130-1-davthompson@nvidia.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|