summaryrefslogtreecommitdiff
path: root/drivers/platform/x86
AgeCommit message (Collapse)Author
2025-06-30platform/x86: dell-wmi-sysman: Fix WMI data block retrieval in sysfs callbacksKurt Borja
After retrieving WMI data blocks in sysfs callbacks, check for the validity of them before dereferencing their content. Reported-by: Jan Graczyk <jangraczyk@yahoo.ca> Closes: https://lore.kernel.org/r/CAHk-=wgMiSKXf7SvQrfEnxVtmT=QVQPjJdNjfm3aXS7wc=rzTw@mail.gmail.com/ Fixes: e8a60aa7404b ("platform/x86: Introduce support for Systems Management Driver over WMI for Dell Systems") Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: Armin Wolf <W_Armin@gmx.de> Signed-off-by: Kurt Borja <kuurtb@gmail.com> Link: https://lore.kernel.org/r/20250630-sysman-fix-v2-1-d185674d0a30@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-06-30platform/x86: int3472: Add board data for Dell 7212Daniel Scally
The Dell 7212 Rugged Extreme Tablet pairs an OV5670 sensor with the Intel IPU3 ISP. The sensor is powered by a TPS68470 PMIC, and so we need some board data to describe how to configure the GPIOs and regulators to run the sensor. Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com> Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-06-26platform/x86: wmi: Fix WMI event enablementArmin Wolf
It turns out that the Windows WMI-ACPI driver always enables/disables WMI events regardless of whether they are marked as expensive or not. This finding is further reinforced when reading the documentation of the WMI_FUNCTION_CONTROL_CALLBACK callback used by Windows drivers for enabling/disabling WMI devices: The DpWmiFunctionControl routine enables or disables notification of events, and enables or disables data collection for data blocks that the driver registered as expensive to collect. Follow this behavior to fix the WMI event used for reporting hotkey events on the Dell Latitude 5400 and likely many more devices. Reported-by: Dmytro Bagrii <dimich.dmb@gmail.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220246 Tested-by: Dmytro Bagrii <dimich.dmb@gmail.com> Fixes: 656f0961d126 ("platform/x86: wmi: Rework WCxx/WExx ACPI method handling") Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20250619221440.6737-1-W_Armin@gmx.de Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-06-25platform/x86: Use i2c adapter name to fix build errorsPratap Nirujogi
Use adapater->name inplace of adapter->owner->name to fix build issues when CONFIG_MODULES is not defined. Fixes: 90b85567e457 ("platform/x86: Add AMD ISP platform config for OV05C10") Reported-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/all/04577a46-9add-420c-b181-29bad582026d@infradead.org Tested-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Pratap Nirujogi <pratap.nirujogi@amd.com> Requires: 942e1aece13e ("i2c: designware: Initialize adapter name only when not set" Requires: c8dc57916973 ("i2c: amd-isp: Initialize unique adapter name") Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Andi Shyti <andi.shyti@kernel.org> Link: https://lore.kernel.org/r/20250609155601.1477055-4-pratap.nirujogi@amd.com
2025-06-25platform/x86: thinkpad_acpi: handle HKEY 0x1402 eventMark Pearson
2025 Thinkpads F11 key launch the Intel Unison app on Windows, which does some sort of smart sharing between laptop and phone. Map this key event to KEY_LINK_PHONE as the closest thing we have. This prevents an error message being displayed on key press. Reported-by: Damjan Georgievski <gdamjan@gmail.com> Closes: https://sourceforge.net/p/ibm-acpi/mailman/message/59189556/ Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca> Link: https://lore.kernel.org/r/20250620181119.2519546-1-mpearson-lenovo@squebb.ca [ij: converted directory to pre-lenovo move as this is fixes material.] Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-06-25platform/x86: asus-nb-wmi: add DMI quirk for ASUS Zenbook Duo UX8406CARahul Chandra
Add a DMI quirk entry for the ASUS Zenbook Duo UX8406CA 2025 model to use the existing zenbook duo keyboard quirk. Signed-off-by: Rahul Chandra <rahul@chandra.net> Link: https://lore.kernel.org/r/20250624073301.602070-1-rahul@chandra.net Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-06-25platform/x86: dell-lis3lv02d: Add Latitude 5500Paul Menzel
Add 0x29 as the accelerometer address for the Dell Latitude 5500 to lis3lv02d_devices[]. The address was verified as below: $ cd /sys/bus/pci/drivers/i801_smbus/0000:00:1f.4 $ ls -d i2c-? i2c-2 $ sudo modprobe i2c-dev $ sudo i2cdetect 2 WARNING! This program can confuse your I2C bus, cause data loss and worse! I will probe file /dev/i2c-2. I will probe address range 0x08-0x77. Continue? [Y/n] Y 0 1 2 3 4 5 6 7 8 9 a b c d e f 00: 08 -- -- -- -- -- -- -- 10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 20: -- -- -- -- -- -- -- -- -- 29 -- -- -- -- -- -- 30: 30 -- -- -- -- 35 UU UU -- -- -- -- -- -- -- -- 40: -- -- -- -- 44 -- -- -- -- -- -- -- -- -- -- -- 50: UU -- 52 -- -- -- -- -- -- -- -- -- -- -- -- -- 60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 70: -- -- -- -- -- -- -- -- $ echo lis3lv02d 0x29 | sudo tee /sys/bus/i2c/devices/i2c-2/new_device lis3lv02d 0x29 $ sudo dmesg [ 0.000000] Linux version 6.12.32-amd64 (debian-kernel@lists.debian.org) (x86_64-linux-gnu-gcc-14 (Debian 14.2.0-19) 14.2.0, GNU ld (GNU Binutils for Debian) 2.44) #1 SMP PREEMPT_DYNAMIC Debian 6.12.32-1 (2025-06-07) […] [ 0.000000] DMI: Dell Inc. Latitude 5500/0M14W7, BIOS 1.38.0 03/06/2025 […] [ 609.063488] i2c_dev: i2c /dev entries driver [ 639.135020] i2c i2c-2: new_device: Instantiated device lis3lv02d at 0x29 Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-by: Hans de Goede <hansg@kernel.org> Link: https://lore.kernel.org/r/20250622080721.4661-1-pmenzel@molgen.mpg.de Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-06-23Merge 6.16-rc3 into driver-core-nextGreg Kroah-Hartman
We need the driver-core fixes that are in 6.16-rc3 into here as well to build on top of. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-17platform/x86: portwell-ec: Move watchdog device under correct platform hierarchyIvan Hu
Without explicitly setting a parent for the watchdog device, the device is registered with a NULL parent. This causes device_add() (called internally by devm_watchdog_register_device()) to register the device under /sys/devices/virtual, since no parent is provided. The result is: DEVPATH=/devices/virtual/watchdog/watchdog0 To fix this, assign &pdev->dev as the parent of the watchdog device before calling devm_watchdog_register_device(). This ensures the device is associated with the Portwell EC platform device and placed correctly in sysfs as: DEVPATH=/devices/platform/portwell-ec/watchdog/watchdog0 This aligns the device hierarchy with expectations and avoids misplacement under the virtual class. Fixes: 835796753310 ("platform/x86: portwell-ec: Add GPIO and WDT driver for Portwell EC") Signed-off-by: Ivan Hu <ivan.hu@canonical.com> Link: https://lore.kernel.org/r/20250616074819.63547-1-ivan.hu@canonical.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-06-17sysfs: treewide: switch back to attribute_group::bin_attrsThomas Weißschuh
The normal bin_attrs field can now handle const pointers. This makes the _new variant unnecessary. Switch all users back. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Link: https://lore.kernel.org/r/20250530-sysfs-const-bin_attr-final-v3-4-724bfcf05b99@weissschuh.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-17sysfs: treewide: switch back to bin_attribute::read()/write()Thomas Weißschuh
The bin_attribute argument of bin_attribute::read() is now const. This makes the _new() callbacks unnecessary. Switch all users back. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Link: https://lore.kernel.org/r/20250530-sysfs-const-bin_attr-final-v3-3-724bfcf05b99@weissschuh.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-13Revert "platform/x86: alienware-wmi-wmax: Add G-Mode support to Alienware ↵Kurt Borja
m16 R1" This reverts commit 5ff79cabb23a2f14d2ed29e9596aec908905a0e6. Although the Alienware m16 R1 AMD model supports G-Mode, it actually has a lower power ceiling than plain "performance" profile, which results in lower performance. Reported-by: Cihan Ozakca <cozakca@outlook.com> Cc: stable@vger.kernel.org # 6.15.x Signed-off-by: Kurt Borja <kuurtb@gmail.com> Link: https://lore.kernel.org/r/20250611-m16-rev-v1-1-72d13bad03c9@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-06-13platform/x86/amd/pmc: Add PCSpecialist Lafite Pro V 14M to 8042 quirks listMario Limonciello
Every other s2idle cycle fails to reach hardware sleep when keyboard wakeup is enabled. This appears to be an EC bug, but the vendor refuses to fix it. It was confirmed that turning off i8042 wakeup avoids ths issue (albeit keyboard wakeup is disabled). Take the lesser of two evils and add it to the i8042 quirk list. Reported-by: Raoul <ein4rth@gmail.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220116 Tested-by: Raoul <ein4rth@gmail.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20250611203341.3733478-1-superm1@kernel.org Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-06-13platform/x86: wmi: Fix WMI device naming issueArmin Wolf
When multiple WMI devices with the same GUID are present inside a given system, the WMI driver core might fail to register all of them. Consider the following scenario: WMI devices (<GUID>[-<ID>]): 05901221-D566-11D1-B2F0-00A0C9062910 (on PNP0C14:00) 05901221-D566-11D1-B2F0-00A0C9062910-1 (on PNP0C14:01) If the WMI core driver somehow unbinds from PNP0C14:00, the following will happen upon rebinding: 1. The WMI driver core counts all registered WMI devices with a GUID of 05901221-D566-11D1-B2F0-00A0C9062910 (count: 1). 2. The new WMI device will be named "05901221-D566-11D1-B2F0-00A0C9062910-1" because another device with the same GUID is already registered (on PNP0C14:01). 3. The new WMI device cannot be registered due to a name conflict. Use a IDA when building the WMI device name to avoid such name collisions by ensuring that a given WMI device ID is not reused. Userspace applications using udev for WMI device detection are not impacted by this change. Additionally userspace applications that do fully support the existing naming scheme are also not impacted. Only userspace applications using hardcoded sysfs paths will break. Introduce a kconfig option for restoring the old naming scheme to give developers time to fix any compatibility issues. Tested on a Asus Prime B650-Plus. Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20250610055526.23688-2-W_Armin@gmx.de Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-06-13platform/x86: fujitsu: clamp charge_control_end_threshold values to 50Jelle van der Waa
Follow the sysfs ABI documentation that drivers should round written values to the nearest supported value instead of returning an error. Tested on a Fujitsu Lifebook U7720. Signed-off-by: Jelle van der Waa <jvanderwaa@redhat.com> Reviewed-by: Hans de Goede <hansg@kernel.org> Acked-by: Jonathan Woithe <jwoithe@just42.net> Link: https://lore.kernel.org/r/20250609102115.36936-3-jvanderwaa@redhat.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-06-13platform/x86: fujitsu: use unsigned int for kstrtounitJelle van der Waa
The charge control threshold value ranges from 0-100. Signed-off-by: Jelle van der Waa <jvanderwaa@redhat.com> Reviewed-by: Hans de Goede <hansg@kernel.org> Acked-by: Jonathan Woithe <jwoithe@just42.net> Link: https://lore.kernel.org/r/20250609102115.36936-2-jvanderwaa@redhat.com [ij: use reverse xmas-tree order] Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-06-13platform/x86: silicom: remove unnecessary GPIO line direction checkBartosz Golaszewski
As of commit 92ac7de3175e3 ("gpiolib: don't allow setting values on input lines"), the GPIO core makes sure values cannot be set on input lines. Remove the unnecessary check. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/r/20250612074835.13800-1-brgl@bgdev.pl Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-06-13platform/x86: lenovo-yoga-tab2-pro-1380-fastcharger: Use ↵Thomas Richard
devm_pinctrl_register_mappings() Use devm_pinctrl_register_mappings(), so the core automatically unregisters the pinctrl mappings. It makes the code easier to read. Signed-off-by: Thomas Richard <thomas.richard@bootlin.com> Reviewed-by: Hans de Goede <hansg@kernel.org> Link: https://lore.kernel.org/r/20250609-lenovo-yoga-tab2-pro-1380-fastcharger-devm-pinctrl-register-mappings-v1-1-fb601f2b80f6@bootlin.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-06-13platform/x86: thinkpad_acpi: Handle KCOV __init vs inline mismatchesKees Cook
When KCOV is enabled all functions get instrumented, unless the __no_sanitize_coverage attribute is used. To prepare for __no_sanitize_coverage being applied to __init functions[1], we have to handle differences in how GCC's inline optimizations get resolved. For thinkpad_acpi routines, this means forcing two functions to be inline with __always_inline. Link: https://lore.kernel.org/lkml/20250523043935.2009972-11-kees@kernel.org/ [1] Signed-off-by: Kees Cook <kees@kernel.org> Link: https://lore.kernel.org/r/20250529181831.work.439-kees@kernel.org Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-06-12platform/x86/intel-uncore-freq: avoid non-literal format stringArnd Bergmann
Using a string variable in place of a format string causes a W=1 build warning: drivers/platform/x86/intel/uncore-frequency/uncore-frequency-common.c:61:40: error: format string is not a string literal (potentially insecure) [-Werror,-Wformat-security] 61 | length += sysfs_emit_at(buf, length, agent_name[agent]); | ^~~~~~~~~~~~~~~~~ Use the safer "%s" format string to print it instead. Fixes: b98fa870fce2 ("platform/x86/intel-uncore-freq: Add attributes to show agent types") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Link: https://lore.kernel.org/r/20250610093459.2646337-1-arnd@kernel.org Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-06-12platform/x86/intel/pmc: Add Panther Lake support to Intel PMC SSRAM TelemetryXi Pardee
Add Panther Lake support to Intel PMC SSRAM Telemetry driver. Signed-off-by: Xi Pardee <xi.pardee@linux.intel.com> Link: https://lore.kernel.org/r/20250610230416.622970-2-xi.pardee@linux.intel.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-06-12platform/x86/intel/pmc: Add Lunar Lake support to Intel PMC SSRAM TelemetryXi Pardee
Add Lunar Lake support to Intel PMC SSRAM Telemetry driver. Signed-off-by: Xi Pardee <xi.pardee@linux.intel.com> Link: https://lore.kernel.org/r/20250610230416.622970-1-xi.pardee@linux.intel.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-06-11platform/x86: ideapad: Expose charge_typesJelle van der Waa
Some Ideapad models support a battery conservation mode which limits the battery charge threshold for longer battery longevity. This is currently exposed via a custom conservation_mode attribute in sysfs. The newly introduced charge_types sysfs attribute is a standardized replacement for laptops with a fixed end charge threshold. Setting it to `Long Life` would enable battery conservation mode. The standardized user space API would allow applications such as UPower to detect laptops which support this battery longevity mode and set it. Tested on an Lenovo ideapad U330p. Signed-off-by: Jelle van der Waa <jvanderwaa@redhat.com> Suggested-By: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Thomas Weißschuh <linux@weissschuh.net> Reviewed-by: Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20250514201054.381320-1-jvanderwaa@redhat.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-06-11platform/x86: Move Lenovo files into lenovo subdirMark Pearson
Create lenovo subdirectory for holding Lenovo specific drivers. Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20250610192830.1731454-2-mpearson-lenovo@squebb.ca [ij: put depends on DMI back, fix trailing empty lines.] Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-06-11platform/x86: thinklmi: improved DMI handlingMark Pearson
Fix issues reported by kernel test robot. - Require DMI for think-lmi. - Check return from getting serial string Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202506062319.F0IpDxF6-lkp@intel.com/ Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20250610192830.1731454-1-mpearson-lenovo@squebb.ca Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-06-11platform/x86: intel_telemetry: Remove unused telemetry_raw_read_events()Dr. David Alan Gilbert
telemetry_raw_read_events() was added by the commit 378f956e3f93 ("platform/x86: Add Intel Telemetry Core Driver") in 2016 but has remained unused. Remove it. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Link: https://lore.kernel.org/r/20250608012512.377134-4-linux@treblig.org Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-06-11platform/x86: intel_telemetry: Remove unused telemetry_[gs]et_sampling_period()Dr. David Alan Gilbert
The functions: - telemetry_get_sampling_period() - telemetry_set_sampling_period() were both added by the commit 378f956e3f93 ("platform/x86: Add Intel Telemetry Core Driver") in 2016 but have remained unused. They're each a tiny wrapper that is the only caller through a similarly named function pointer, and for each function pointer there's a 'def' empty implementation and a plt implementation. Remove all of those components for each function. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Link: https://lore.kernel.org/r/20250608012512.377134-3-linux@treblig.org Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-06-11platform/x86: intel_telemetry: Remove unused telemetry_*_events()Dr. David Alan Gilbert
The functions: - telemetry_add_events() - telemetry_update_events() - telemetry_reset_events() - telemetry_get_eventconfig() were all added by the commit 378f956e3f93 ("platform/x86: Add Intel Telemetry Core Driver") in 2016 but have remained unused. They're each a tiny wrapper that is the only caller through a similarly named function pointer, and for each function pointer there's a 'def' empty implementation and a plt implementation. Remove all of those components for each function. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Link: https://lore.kernel.org/r/20250608012512.377134-2-linux@treblig.org Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-06-10platform/x86: dell_rbu: Bump versionStuart Hayes
Bump the module version. Signed-off-by: Stuart Hayes <stuart.w.hayes@gmail.com> Link: https://lore.kernel.org/r/20250609184659.7210-6-stuart.w.hayes@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-06-10platform/x86: dell_rbu: Stop overwriting data bufferStuart Hayes
The dell_rbu driver will use memset() to clear the data held by each packet when it is no longer needed (when the driver is unloaded, the packet size is changed, etc). The amount of memory that is cleared (before this patch) is the normal packet size. However, the last packet in the list may be smaller. Fix this to only clear the memory actually used by each packet, to prevent it from writing past the end of data buffer. Because the packet data buffers are allocated with __get_free_pages() (in page-sized increments), this bug could only result in a buffer being overwritten when a packet size larger than one page is used. The only user of the dell_rbu module should be the Dell BIOS update program, which uses a packet size of 4096, so no issues should be seen without the patch, it just blocks the possiblity. Fixes: 6c54c28e69f2 ("[PATCH] dell_rbu: new Dell BIOS update driver") Signed-off-by: Stuart Hayes <stuart.w.hayes@gmail.com> Link: https://lore.kernel.org/r/20250609184659.7210-5-stuart.w.hayes@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-06-10platform/x86: dell_rbu: Fix list usageStuart Hayes
Pass the correct list head to list_for_each_entry*() when looping through the packet list. Without this patch, reading the packet data via sysfs will show the data incorrectly (because it starts at the wrong packet), and clearing the packet list will result in a NULL pointer dereference. Fixes: d19f359fbdc6 ("platform/x86: dell_rbu: don't open code list_for_each_entry*()") Signed-off-by: Stuart Hayes <stuart.w.hayes@gmail.com> Link: https://lore.kernel.org/r/20250609184659.7210-3-stuart.w.hayes@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-06-10platform/x86: dell_rbu: Fix lock context warningStuart Hayes
Fix a sparse lock context warning. Signed-off-by: Stuart Hayes <stuart.w.hayes@gmail.com> Link: https://lore.kernel.org/r/20250609184659.7210-2-stuart.w.hayes@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-06-10platform/x86/amd: pmf: Simplify error flow in amd_pmf_init_smart_pc()Mario Limonciello
commit 5b1122fc4995f ("platform/x86/amd/pmf: fix cleanup in amd_pmf_init_smart_pc()") adjusted the error handling flow to use a ladder but this isn't actually needed because work is only scheduled in amd_pmf_start_policy_engine() and with device managed cleanups pointers for allocations don't need to be freed. Adjust the error flow to a single call to amd_pmf_deinit_smart_pc() for the cases that need to clean up. Cc: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/r/20250512211154.2510397-4-superm1@kernel.org Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20250522003457.1516679-4-superm1@kernel.org Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-06-10platform/x86/amd: pmf: Prevent amd_pmf_tee_deinit() from running twiceMario Limonciello
If any of the tee init fails, pass up the errors and clear the tee_ctx pointer. This will prevent cleaning up multiple times. Fixes: ac052d8c08f9d ("platform/x86/amd/pmf: Add PMF TEE interface") Suggested-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/r/20250512211154.2510397-3-superm1@kernel.org Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20250522003457.1516679-3-superm1@kernel.org Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-06-10platform/x86/amd: pmf: Use device managed allocationsMario Limonciello
If setting up smart PC fails for any reason then this can lead to a double free when unloading amd-pmf. This is because dev->buf was freed but never set to NULL and is again freed in amd_pmf_remove(). To avoid subtle allocation bugs in failures leading to a double free change all allocations into device managed allocations. Fixes: 5b1122fc4995f ("platform/x86/amd/pmf: fix cleanup in amd_pmf_init_smart_pc()") Link: https://lore.kernel.org/r/20250512211154.2510397-2-superm1@kernel.org Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20250522003457.1516679-2-superm1@kernel.org Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-06-09platform/x86/amd/hsmp: Use IS_ENABLED() instead of IS_REACHABLE()Suma Hegde
IS_REACHABLE() was required when CONFIG_HWMON was set to m and HSMP to y. However, commit 69157b00b526 ("platform/x86/amd/hsmp: fix building with CONFIG_HWMON=m") added a HWMON dependency for HSMP in Kconfig. With this change, using IS_ENABLED() is sufficient. Add the missing header file as well. Signed-off-by: Suma Hegde <suma.hegde@amd.com> Link: https://lore.kernel.org/r/20250603055807.2503028-1-suma.hegde@amd.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-06-09platform/x86: alienware-wmi-wmax: Add appropriate labels to fansKurt Borja
Add known fan type IDs and match them to an appropriate label in awcc_hwmon_read_string(). Additionally, add the AWCC_TEMP_SENSOR_FRONT type, which was inferred from it's related fan type in supported systems. Signed-off-by: Kurt Borja <kuurtb@gmail.com> Reviewed-by: Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20250528-awcc-labels-v1-1-6aa39d8e4c3d@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-06-09x86/platform/amd: replace down_timeout() with down_interruptible()Jake Hillion
Currently hsmp_send_message() uses down_timeout() with a 100ms timeout to take the semaphore. However __hsmp_send_message(), the content of the critical section, has a sleep in it. On systems with significantly delayed scheduling behaviour this may take over 100ms. Convert this method to down_interruptible(). Leave the error handling the same as the documentation currently is not specific about what error is returned. Previous behaviour: a caller who competes with another caller stuck in the critical section due to scheduler delays would receive -ETIME. New behaviour: a caller who competes with another caller stuck in the critical section due to scheduler delays will complete successfully. Reviewed-by: Suma Hegde <suma.hegde@amd.com> Tested-by: Suma Hegde <suma.hegde@amd.com> Signed-off-by: Jake Hillion <jake@hillion.co.uk> Link: https://lore.kernel.org/r/20250605-amd-hsmp-v2-2-a811bc3dd74a@hillion.co.uk Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-06-09x86/platform/amd: move final timeout check to after final sleepJake Hillion
__hsmp_send_message sleeps between result read attempts and has a timeout of 100ms. Under extreme load it's possible for these sleeps to take a long time, exceeding the 100ms. In this case the current code does not check the register and fails with ETIMEDOUT. Refactor the loop to ensure there is at least one read of the register after a sleep of any duration. This removes instances of ETIMEDOUT with a single caller, even with a misbehaving scheduler. Tested on AMD Bergamo machines. Suggested-by: Blaise Sanouillet <linux@blaise.sanouillet.com> Reviewed-by: Suma Hegde <suma.hegde@amd.com> Tested-by: Suma Hegde <suma.hegde@amd.com> Signed-off-by: Jake Hillion <jake@hillion.co.uk> Link: https://lore.kernel.org/r/20250605-amd-hsmp-v2-1-a811bc3dd74a@hillion.co.uk Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-06-09platform/x86/amd: pmc: Clear metrics table at start of cycleMario Limonciello
The area of memory that contains the metrics table may contain garbage when the cycle starts. This normally doesn't matter because the cycle itself will populate it with valid data, however commit 9f5595d5f03fd ("platform/x86/amd: pmc: Require at least 2.5 seconds between HW sleep cycles") started to use it during the check() phase. Depending upon what garbage is in the table it's possible that the system will wait 2.5 seconds for even the first cycle, which will be visible to a user. To prevent this from happening explicitly clear the table when logging is started. Fixes: 9f5595d5f03fd ("platform/x86/amd: pmc: Require at least 2.5 seconds between HW sleep cycles") Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20250603132412.3555302-1-superm1@kernel.org Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-06-09platform/x86/intel: power-domains: Fix error code in tpmi_init()Dan Carpenter
Return -ENOMEM instead of success if kcalloc() fails. Fixes: e37be5d85c60 ("platform/x86/intel: power-domains: Add interface to get Linux die ID") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/r/aEKvIGCt6d8Gcx4S@stanley.mountain Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-06-09platform/x86: samsung-galaxybook: Add SAM0426Joshua Grisham
Add device ID SAM0426 (Notebook 9 Pro and similar devices) as reported and tested by GitHub user "diego-karsa" [1]. [1]: https://github.com/joshuagrisham/samsung-galaxybook-extras/issues/69 Signed-off-by: Joshua Grisham <josh@joshuagrisham.com> Reviewed-by: Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20250606130909.207047-1-josh@joshuagrisham.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-06-09platform/x86/intel-uncore-freq: Fail module load when plat_info is NULLSrinivas Pandruvada
Address a Smatch static checker warning regarding an unchecked dereference in the function call: set_cdie_id(i, cluster_info, plat_info) when plat_info is NULL. Instead of addressing this one case, in general if plat_info is NULL then it can cause other issues. For example in a two package system it will give warning for duplicate sysfs entry as package ID will be always zero for both packages when creating string for attribute group name. plat_info is derived from TPMI ID TPMI_BUS_INFO, which is integral to the core TPMI design. Therefore, it should not be NULL on a production platform. Consequently, the module should fail to load if plat_info is NULL. Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/platform-driver-x86/aEKvGCLd1qmX04Tc@stanley.mountain/T/#u Fixes: 8a54e2253e4c ("platform/x86/intel-uncore-freq: Uncore frequency control via TPMI") Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20250606205300.2384494-1-srinivas.pandruvada@linux.intel.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-06-09platform/x86: ideapad-laptop: use usleep_range() for EC pollingRong Zhang
It was reported that ideapad-laptop sometimes causes some recent (since 2024) Lenovo ThinkBook models shut down when: - suspending/resuming - closing/opening the lid - (dis)connecting a charger - reading/writing some sysfs properties, e.g., fan_mode, touchpad - pressing down some Fn keys, e.g., Brightness Up/Down (Fn+F5/F6) - (seldom) loading the kmod The issue has existed since the launch day of such models, and there have been some out-of-tree workarounds (see Link:) for the issue. One disables some functionalities, while another one simply shortens IDEAPAD_EC_TIMEOUT. The disabled functionalities have read_ec_data() in their call chains, which calls schedule() between each poll. It turns out that these models suffer from the indeterminacy of schedule() because of their low tolerance for being polled too frequently. Sometimes schedule() returns too soon due to the lack of ready tasks, causing the margin between two polls to be too short. In this case, the command is somehow aborted, and too many subsequent polls (they poll for "nothing!") may eventually break the state machine in the EC, resulting in a hard shutdown. This explains why shortening IDEAPAD_EC_TIMEOUT works around the issue - it reduces the total number of polls sent to the EC. Even when it doesn't lead to a shutdown, frequent polls may also disturb the ongoing operation and notably delay (+ 10-20ms) the availability of EC response. This phenomenon is unlikely to be exclusive to the models mentioned above, so dropping the schedule() manner should also slightly improve the responsiveness of various models. Fix these issues by migrating to usleep_range(150, 300). The interval is chosen to add some margin to the minimal 50us and considering EC responses are usually available after 150-2500us based on my test. It should be enough to fix these issues on all models subject to the EC bug without introducing latency on other models. Tested on ThinkBook 14 G7+ ASP and solved both issues. No regression was introduced in the test on a model without the EC bug (ThinkBook X IMH, thanks Eric). Link: https://github.com/ty2/ideapad-laptop-tb2024g6plus/commit/6c5db18c9e8109873c2c90a7d2d7f552148f7ad4 Link: https://github.com/ferstar/ideapad-laptop-tb/commit/42d1e68e5009529d31bd23f978f636f79c023e80 Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218771 Fixes: 6a09f21dd1e2 ("ideapad: add ACPI helpers") Cc: stable@vger.kernel.org Tested-by: Felix Yan <felixonmars@archlinux.org> Tested-by: Eric Long <i@hack3r.moe> Tested-by: Jianfei Zhang <zhangjianfei3@gmail.com> Tested-by: Mingcong Bai <jeffbai@aosc.io> Tested-by: Minh Le <minhld139@gmail.com> Tested-by: Sicheng Zhu <Emmet_Z@outlook.com> Signed-off-by: Rong Zhang <i@rong.moe> Link: https://lore.kernel.org/r/20250525201833.37939-1-i@rong.moe Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-06-08treewide, timers: Rename from_timer() to timer_container_of()Ingo Molnar
Move this API to the canonical timer_*() namespace. [ tglx: Redone against pre rc1 ] Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com
2025-05-29Merge tag 'platform-drivers-x86-v6.16-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform drivers updates from Ilpo Järvinen: "The changes are mostly business as usual. Besides pdx86 changes, there are a few power supply changes needed for related pdx86 features, move of oxpec driver from hwmon (oxp-sensors) to pdx86, and one FW version warning to hid-asus. Highlights: - alienware-wmi-wmax: - Add HWMON support - Add ABI and admin-guide documentation - Expose GPIO debug methods through debug FS - Support manual fan control and "custom" thermal profile - amd/hsmp: - Add sysfs files to show HSMP telemetry - Report power readings and limits via hwmon - amd/isp4: Add AMD ISP platform config for OV05C10 - asus-wmi: - Refactor Ally suspend/resume to work better with older FW - hid-asus: check ROG Ally MCU version and warn about old FW versions - dasharo-acpi: - Add driver for Dasharo devices supporting fans and temperatures monitoring - dell-ddv: - Expose the battery health and manufacture date to userspace using power supply extensions - Implement the battery matching algorithm - dell-pc: - Improve error propagation - Use faux device - int3472: - Add delays to avoid GPIO regulator spikes - Add handshake pin support - Make regulator supply name configurable and allow registering more than 1 GPIO regulator - Map mt9m114 powerdown pin to powerenable - intel/pmc: Add separate SSRAM Telemetry driver - intel-uncore-freq: Add attributes to show agent types and die ID - ISST: - Support SST-TF revision 2 (allows more cores per bucket) - Support SST-PP revision 2 (fabric 1 frequencies) - Remove unnecessary SST MSRs restore (the package retains MSRs despite CPU offlining) - mellanox: Add support for SN2201, SN4280, SN5610, and SN5640 - mellanox: mlxbf-pmc: Support additional PMC blocks - oxpec: - Add OneXFly variants - Add support for charge limit, charge thresholds, and turbo LED - Distinguish current X1 variants to avoid unwanted matching to new variants - Follow hwmon conventions - Move from hwmon/oxp-sensors to platform/x86 to match the enlarged scope - power supply: - Add inhibit-charge-awake (needed by oxpec) - Add additional battery health status values ("blown fuse" and "cell imbalance") (needed by dell-ddv) - powerwell-ec: Add driver for Portwell EC supporting GPIO and watchdog - thinkpad-acpi: Support camera shutter switch hotkey - tuxedo: Add virtual LampArray for TUXEDO NB04 devices - tools/power/x86/intel-speed-select: - Support displaying SST-PP revision 2 fields - Skip uncore frequency update on newer generations of CPUs - Miscellaneous cleanups / refactoring / improvements" * tag 'platform-drivers-x86-v6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (112 commits) thermal/drivers/acerhdf: Constify struct thermal_zone_device_ops platform/x86/amd/hsmp: fix building with CONFIG_HWMON=m platform/x86: asus-wmi: fix build without CONFIG_SUSPEND docs: ABI: Fix "aassociated" to "associated" platform/x86: Add AMD ISP platform config for OV05C10 Documentation: admin-guide: pm: Add documentation for die_id platform/x86/intel-uncore-freq: Add attributes to show die_id platform/x86/intel: power-domains: Add interface to get Linux die ID Documentation: admin-guide: pm: Add documentation for agent_types platform/x86/intel-uncore-freq: Add attributes to show agent types platform/x86/tuxedo: Prevent invalid Kconfig state platform/x86: dell-ddv: Expose the battery health to userspace platform/x86: dell-ddv: Expose the battery manufacture date to userspace platform/x86: dell-ddv: Implement the battery matching algorithm power: supply: core: Add additional health status values platform/x86/amd/hsmp: acpi: Add sysfs files to display HSMP telemetry platform/x86/amd/hsmp: Report power via hwmon sensors platform/x86/amd/hsmp: Use a single DRIVER_VERSION for all hsmp modules platform/mellanox: mlxreg-dpu: Fix smatch warnings platform: mellanox: nvsw-sn2200: Fix .items in nvsw_sn2201_busbar_hotplug ...
2025-05-27Merge tag 'gpio-updates-for-v6.16-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio updates from Bartosz Golaszewski: "We have three new drivers, some refactoring in the GPIO core, lots of various changes across many drivers, new configfs interface for the virtual gpio-aggregator module and DT-bindings updates. The treewide conversion of GPIO drivers to using the new value setter callbacks is ongoing with another round of GPIO drivers updated. You will also see these commits coming in from other subsystems as with the relevant changes merged into mainline last cycle, I've started converting GPIO providers located elsewhere than drivers/gpio/. GPIO core: - use more lock guards where applicable - refactor GPIO ACPI code and shrink it in the process by 8% - move GPIO ACPI quirks into a separate file - remove unneeded #ifdef - convert GPIO devres helpers to using devm_add_action() where applicable which shrinks and simplifies the code - refactor GPIO descriptor validation in GPIO consumer interfaces - don't allow setting values on input lines in the GPIO core which will take off the burden from GPIO drivers of checking this down the line - provide gpiod_is_equal() as a way of safely comparing two GPIO descriptors (the only current user is in regulator core) New drivers: - add the GPIO module for the max77759 multifunction device - add the GPIO driver for the VeriSilicon BLZP1600 GPIO controller - add the GPIO driver for the Spacemit K1 SoC Driver improvements: - convert more drivers to using the new GPIO line value setter callbacks - convert more drivers to making the irq_chip immutable as is recommended by the interrupt subsystem - extend build testing coverage by enabling more modules to be built with COMPILE_TEST=y - extend the gpio-aggregator module with a configfs interface that makes the setup easier for user-space than the existing driver-level sysfs attributes and also adds more advanced configuration features (such as referring to aggregated lines by their original names or modifying their names as exposed by the aggregated chip) - add a missing mutex_destroy() in gpio-imx-scu - add an OF polarity quirk for s5m8767 - allow building gpio-vf610 as a loadable module - make gpio-mxc not hardcode its GPIO base number with GPIO SYSFS interface disabled (another small step towards getting rid of the global GPIO numberspace) - add support for level-triggered interrupts to gpio-pca953x - don't double-check the ngpios property in gpio-ds4520 as GPIO core already does it - don't double-check the number of GPIOs in gpio-imx-scu as GPIO core already does it - remove unused callbacks from gpio-max3191x DT bindings: - add device-tree bindings for max77759, spacemit,k1 and blzp1600 (new drivers added this cycle) - document more properties for gpio-vf610 and gpio-tegra186 - document a new pca95xx variant - fix style of examples in several GPIO DT-binding documents Misc: - TODO list updates" * tag 'gpio-updates-for-v6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (123 commits) gpio: timberdale: select GPIOLIB_IRQCHIP gpio: lpc18xx: select GPIOLIB_IRQCHIP gpio: grgpio: select GPIOLIB_IRQCHIP gpio: bcm-kona: select GPIOLIB_IRQCHIP dt-bindings: gpio: vf610: add ngpios and gpio-reserved-ranges gpio: davinci: select GPIOLIB_IRQCHIP gpiolib-acpi: Update file references in the Documentation and MAINTAINERS gpiolib: acpi: Move quirks to a separate file gpiolib: acpi: Add acpi_gpio_need_run_edge_events_on_boot() getter gpiolib: acpi: Handle deferred list via new API gpiolib: acpi: Make sure we fill struct acpi_gpio_info gpiolib: acpi: Switch to use enum in acpi_gpio_in_ignore_list() gpiolib: acpi: Use temporary variable for struct acpi_gpio_info gpiolib: remove unneeded #ifdef gpio: mpc8xxx: select GPIOLIB_IRQCHIP gpio: pxa: select GPIOLIB_IRQCHIP gpio: pxa: Make irq_chip immutable gpio: timberdale: Make irq_chip immutable gpio: xgene-sb: Make irq_chip immutable gpio: davinci: Make irq_chip immutable ...
2025-05-26Merge tag 'x86-core-2025-05-25' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull core x86 updates from Ingo Molnar: "Boot code changes: - A large series of changes to reorganize the x86 boot code into a better isolated and easier to maintain base of PIC early startup code in arch/x86/boot/startup/, by Ard Biesheuvel. Motivation & background: | Since commit | | c88d71508e36 ("x86/boot/64: Rewrite startup_64() in C") | | dated Jun 6 2017, we have been using C code on the boot path in a way | that is not supported by the toolchain, i.e., to execute non-PIC C | code from a mapping of memory that is different from the one provided | to the linker. It should have been obvious at the time that this was a | bad idea, given the need to sprinkle fixup_pointer() calls left and | right to manipulate global variables (including non-pointer variables) | without crashing. | | This C startup code has been expanding, and in particular, the SEV-SNP | startup code has been expanding over the past couple of years, and | grown many of these warts, where the C code needs to use special | annotations or helpers to access global objects. This tree includes the first phase of this work-in-progress x86 boot code reorganization. Scalability enhancements and micro-optimizations: - Improve code-patching scalability (Eric Dumazet) - Remove MFENCEs for X86_BUG_CLFLUSH_MONITOR (Andrew Cooper) CPU features enumeration updates: - Thorough reorganization and cleanup of CPUID parsing APIs (Ahmed S. Darwish) - Fix, refactor and clean up the cacheinfo code (Ahmed S. Darwish, Thomas Gleixner) - Update CPUID bitfields to x86-cpuid-db v2.3 (Ahmed S. Darwish) Memory management changes: - Allow temporary MMs when IRQs are on (Andy Lutomirski) - Opt-in to IRQs-off activate_mm() (Andy Lutomirski) - Simplify choose_new_asid() and generate better code (Borislav Petkov) - Simplify 32-bit PAE page table handling (Dave Hansen) - Always use dynamic memory layout (Kirill A. Shutemov) - Make SPARSEMEM_VMEMMAP the only memory model (Kirill A. Shutemov) - Make 5-level paging support unconditional (Kirill A. Shutemov) - Stop prefetching current->mm->mmap_lock on page faults (Mateusz Guzik) - Predict valid_user_address() returning true (Mateusz Guzik) - Consolidate initmem_init() (Mike Rapoport) FPU support and vector computing: - Enable Intel APX support (Chang S. Bae) - Reorgnize and clean up the xstate code (Chang S. Bae) - Make task_struct::thread constant size (Ingo Molnar) - Restore fpu_thread_struct_whitelist() to fix CONFIG_HARDENED_USERCOPY=y (Kees Cook) - Simplify the switch_fpu_prepare() + switch_fpu_finish() logic (Oleg Nesterov) - Always preserve non-user xfeatures/flags in __state_perm (Sean Christopherson) Microcode loader changes: - Help users notice when running old Intel microcode (Dave Hansen) - AMD: Do not return error when microcode update is not necessary (Annie Li) - AMD: Clean the cache if update did not load microcode (Boris Ostrovsky) Code patching (alternatives) changes: - Simplify, reorganize and clean up the x86 text-patching code (Ingo Molnar) - Make smp_text_poke_batch_process() subsume smp_text_poke_batch_finish() (Nikolay Borisov) - Refactor the {,un}use_temporary_mm() code (Peter Zijlstra) Debugging support: - Add early IDT and GDT loading to debug relocate_kernel() bugs (David Woodhouse) - Print the reason for the last reset on modern AMD CPUs (Yazen Ghannam) - Add AMD Zen debugging document (Mario Limonciello) - Fix opcode map (!REX2) superscript tags (Masami Hiramatsu) - Stop decoding i64 instructions in x86-64 mode at opcode (Masami Hiramatsu) CPU bugs and bug mitigations: - Remove X86_BUG_MMIO_UNKNOWN (Borislav Petkov) - Fix SRSO reporting on Zen1/2 with SMT disabled (Borislav Petkov) - Restructure and harmonize the various CPU bug mitigation methods (David Kaplan) - Fix spectre_v2 mitigation default on Intel (Pawan Gupta) MSR API: - Large MSR code and API cleanup (Xin Li) - In-kernel MSR API type cleanups and renames (Ingo Molnar) PKEYS: - Simplify PKRU update in signal frame (Chang S. Bae) NMI handling code: - Clean up, refactor and simplify the NMI handling code (Sohil Mehta) - Improve NMI duration console printouts (Sohil Mehta) Paravirt guests interface: - Restrict PARAVIRT_XXL to 64-bit only (Kirill A. Shutemov) SEV support: - Share the sev_secrets_pa value again (Tom Lendacky) x86 platform changes: - Introduce the <asm/amd/> header namespace (Ingo Molnar) - i2c: piix4, x86/platform: Move the SB800 PIIX4 FCH definitions to <asm/amd/fch.h> (Mario Limonciello) Fixes and cleanups: - x86 assembly code cleanups and fixes (Uros Bizjak) - Misc fixes and cleanups (Andi Kleen, Andy Lutomirski, Andy Shevchenko, Ard Biesheuvel, Bagas Sanjaya, Baoquan He, Borislav Petkov, Chang S. Bae, Chao Gao, Dan Williams, Dave Hansen, David Kaplan, David Woodhouse, Eric Biggers, Ingo Molnar, Josh Poimboeuf, Juergen Gross, Malaya Kumar Rout, Mario Limonciello, Nathan Chancellor, Oleg Nesterov, Pawan Gupta, Peter Zijlstra, Shivank Garg, Sohil Mehta, Thomas Gleixner, Uros Bizjak, Xin Li)" * tag 'x86-core-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (331 commits) x86/bugs: Fix spectre_v2 mitigation default on Intel x86/bugs: Restructure ITS mitigation x86/xen/msr: Fix uninitialized variable 'err' x86/msr: Remove a superfluous inclusion of <asm/asm.h> x86/paravirt: Restrict PARAVIRT_XXL to 64-bit only x86/mm/64: Make 5-level paging support unconditional x86/mm/64: Make SPARSEMEM_VMEMMAP the only memory model x86/mm/64: Always use dynamic memory layout x86/bugs: Fix indentation due to ITS merge x86/cpuid: Rename hypervisor_cpuid_base()/for_each_possible_hypervisor_cpuid_base() to cpuid_base_hypervisor()/for_each_possible_cpuid_base_hypervisor() x86/cpu/intel: Rename CPUID(0x2) descriptors iterator parameter x86/cacheinfo: Rename CPUID(0x2) descriptors iterator parameter x86/cpuid: Rename cpuid_get_leaf_0x2_regs() to cpuid_leaf_0x2() x86/cpuid: Rename have_cpuid_p() to cpuid_feature() x86/cpuid: Set <asm/cpuid/api.h> as the main CPUID header x86/cpuid: Move CPUID(0x2) APIs into <cpuid/api.h> x86/msr: Add rdmsrl_on_cpu() compatibility wrapper x86/mm: Fix kernel-doc descriptions of various pgtable methods x86/asm-offsets: Export certain 'struct cpuinfo_x86' fields for 64-bit asm use too x86/boot: Defer initialization of VM space related global variables ...
2025-05-26thermal/drivers/acerhdf: Constify struct thermal_zone_device_opsChristophe JAILLET
'struct thermal_zone_device_ops' could be left unmodified in this driver. Constifying this structure moves some data to a read-only section, so increases overall security, especially when the structure holds some function pointers. While at it, also constify a struct thermal_zone_params. On a x86_64, with allmodconfig: Before: ====== text data bss dec hex filename 26422 12584 512 39518 9a5e drivers/platform/x86/acerhdf.o After: ===== text data bss dec hex filename 26646 12360 512 39518 9a5e drivers/platform/x86/acerhdf.o Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/e502fadf2c6b24fc4ec3a7880533f7ca68429720.1748177235.git.christophe.jaillet@wanadoo.fr Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-05-25platform/x86/amd/hsmp: fix building with CONFIG_HWMON=mArnd Bergmann
When CONFIG_HWMON is built as a loadable module, the HSMP drivers cannot be built-in: ERROR: modpost: "hsmp_create_sensor" [drivers/platform/x86/amd/hsmp/amd_hsmp.ko] undefined! ERROR: modpost: "hsmp_create_sensor" [drivers/platform/x86/amd/hsmp/hsmp_acpi.ko] undefined! Enforce that through the usual Kconfig dependnecy trick. Fixes: 92c025db52bb ("platform/x86/amd/hsmp: Report power via hwmon sensors") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20250522144422.2824083-1-arnd@kernel.org Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
generated by cgit v1.2.3 (git 2.46.0) at 2025-09-26 11:42:06 +0000