| Age | Commit message (Collapse) | Author |
|---|
|
Cyberbook T116
The Cyberbook T116 rugged tablet comes in both Windows and Android versions
and even on the Android version the DSDT is mostly sane. This tablet has
2 extra general purpose buttons in the row with the power + volume-buttons,
labeled P and F.
Use the x86-android-tablets infra to create a gpio-button device for these
2 extra buttons.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20230505205901.42649-2-hdegoede@redhat.com
|
|
Modify the gpio_keys support in x86_android_tablet_init() for
tablets which have more then 1 key/button which needs to be handled
by the gpio_keys driver.
This requires copying over the struct gpio_keys_button from
the x86_gpio_button struct array to a new gpio_keys_button struct array,
as an added benefit this allows marking the per model x86_gpio_button
arrays __initconst so that they all can be freed after module init().
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230505205901.42649-1-hdegoede@redhat.com
|
|
The Nextbook Ares 8A is a x86 ACPI tablet which ships with Android x86
as factory OS. Its DSDT contains a bunch of I2C devices which are not
actually there, causing various resource conflicts. Enumeration of these
is skipped through the acpi_quirk_skip_i2c_client_enumeration().
Add support for manually instantiating the I2C devices which are
actually present on this tablet by adding the necessary device info to
the x86-android-tablets module.
Note the Ares 8A is the Cherry Trail (CHT) model, the regular Ares 8
is Bay Trail (BYT) based and was already supported. This also updates
the comments for the BYT model to point out this is the BYT model.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230429105057.7697-3-hdegoede@redhat.com
|
|
The Lenovo Yoga Book X90F/L is a x86 ACPI tablet which ships with Android
x86 as factory OS. Its DSDT contains a bunch of I2C devices which are not
actually there, causing various resource conflicts. Enumeration of these
is skipped through the acpi_quirk_skip_i2c_client_enumeration().
Add support for manually instantiating the I2C + other devices which are
actually present on this tablet by adding the necessary device info to
the x86-android-tablets module.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20230401150737.597417-3-hdegoede@redhat.com
|
|
Yoga 830 and the 1050
Both the Lenovo Yoga Tablet 2 830 and 1050 models use an TI LP8557 LED
backlight controller. On the 1050 the LP8557's PWM input is connected to
the PMIC's PWM output and everything works fine with the defaults
programmed into the LP8557 by the BIOS.
But on the 830 the LP8557's PWM input is connected to a PWM output coming
from the LCD panel's controller. The Android code has a hack in the i915
driver to write the non-standard DSI reg 0x9f with the desired backlight
level to set the duty-cycle of the LCD's PWM output.
To avoid having to have a similar hack in the mainline kernel the LP8557
entry in lenovo_yoga_tab2_830_1050_i2c_clients instead just programs the
LP8557 to directly set the level, ignoring the PWM input.
So far we have only been instantiating the LP8557 i2c_client for direct
backlight control on the 830 model. But we want hide/disable the
intel_backlight interface on the 830 model to avoid having 2 backlight
interfaces for the same LCD panel.
And the 830 and 1050 share the same DMI strings. So this will hide the
intel_backlight interface on the 1050 model too.
To avoid this causing problems make the backlight handling consistent
between the 2 models and always directly use the LP8557.
This also simplifies the code.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20230401150737.597417-1-hdegoede@redhat.com
|
|
models only
When support for instantiating an i2c-client for the fuel-gauge was
added for the Windows based Yoga Book YB1-X91F/L models, the assumption
was made that this would apply to the Android based YB1-X90F/L models too.
But these have a completely different BIOS with completely different DMI
strings. Update the existing YB1-X91 support to reflect that it only
applies to the YB1-X91F/L models.
Cc: Yauhen Kharuzhy <jekhor@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20230301092331.7038-15-hdegoede@redhat.com
|
|
C1010
The Peaq C1010 tablet has a special "Dolby" button. This button has
a WMI interface, but this is broken in several ways:
1. It only supports polling
2. The value read on polling goes from 0 -> 1 for one poll on both edges
of the button, with no way to tell which edge causes the poll to
return 1.
3. It uses a non unique GUID (it uses the Microsoft docs WMI example GUID).
There currently is a WMI driver for this, but it uses several kludges
to work around these issues and is not entirely reliable due to 2.
Replace the unreliable WMI driver by using the x86-android-tablets code
to instantiate a gpio_keys device for this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20230301092331.7038-11-hdegoede@redhat.com
|
|
x86_android_tablet_init()
Add gpio_keys instantation support to x86_android_tablet_init(), to avoid
this having to be repeated in various x86_dev_info.init() functions.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20230301092331.7038-10-hdegoede@redhat.com
|
|
In order to have a single MODULE_DEVICE_TABLE(dmi, ...), while allowing
splitting the board descriptions into multiple files, add a new separate
file for the DMI match table.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20230301092331.7038-5-hdegoede@redhat.com
|
|
Move the helpers to get IRQs + GPIOs as well as the core code for
instantiating all the devices missing from ACPI into a new core.c file.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20230301092331.7038-4-hdegoede@redhat.com
|
