| Age | Commit message (Collapse) | Author |
|---|
|
The struct holding device driver data contained both read only(ro)
and read write(rw) fields.
Separating ro fields from rw fields was recommended as
a preferable design pattern during review[1].
Group ro fields into a separate const struct. Associate it to
the miscdevice being registered by keeping its pointer in the
same container struct as the miscdevice.
Link: https://lore.kernel.org/lkml/Y+9H9otxLYPqMkUh@kroah.com/ [1]
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20230322003359.213046-3-jithu.joseph@intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
In preparation to supporting additional tests, remove ifs_pkg_auth
from per-test scope, as it is only applicable for one test type.
This will simplify ifs_init() flow when multiple tests are added.
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20230322003359.213046-2-jithu.joseph@intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
For platforms with Alder Lake PCH (Alder Lake S and Raptor Lake S) the
slp_s0_residency attribute has been reporting the wrong value. Unlike other
platforms, ADL PCH does not have a counter for the time that the SLP_S0
signal was asserted. Instead, firmware uses the aggregate of the Low Power
Mode (LPM) substate counters as the S0ix value. Since the LPM counters run
at a different frequency, this lead to misreporting of the S0ix time.
Add a check for Alder Lake PCH and adjust the frequency accordingly when
display slp_s0_residency.
Fixes: bbab31101f44 ("platform/x86/intel: pmc/core: Add Alderlake support to pmc core driver")
Signed-off-by: Rajvi Jingar <rajvi.jingar@linux.intel.com>
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Rajneesh Bhardwaj <irenic.rajneesh@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20230320212029.3154407-1-david.e.box@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
error cleanup
On auxiliary_device_init(auxdev) failure we need to do the exact same
cleanup steps as on device.release(), so use the intel_vsec_dev_release()
callback for this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20230320103815.229729-1-hdegoede@redhat.com
|
|
Since the currently exported symbols in pmt_class are only used by other
Intel PMT drivers, create an INTEL_PMT module namespace for them.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20230316225736.2856521-1-david.e.box@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Discovered Intel VSEC/DVSEC capabilities are enabled by default and only
get disabled by quirk. Instead, remove such quirks and only enable support
for capabilities that have been explicitly added to a new capabilities
field. While here, also reorder the device info structures alphabetically.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20230316224628.2855884-1-david.e.box@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
intel_vsec_add_aux() is resource managed including res and
feature_vsec_dev memory.
Fix this by revising the comment of intel_vsec_add_aux since res variable
will also be freed in the intel_vsec_add_aux.
Signed-off-by: Dongliang Mu <dzm91@hust.edu.cn>
Link: https://lore.kernel.org/r/20230309040107.534716-3-dzm91@hust.edu.cn
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The previous commit 6a192c0cbf38 ("platform/x86/intel/tpmi: Fix
double free reported by Smatch") incorrectly handle the deallocation of
res variable. As shown in the comment, intel_vsec_add_aux handles all
the deallocation of res and feature_vsec_dev. Therefore, kfree(res) can
still cause double free if intel_vsec_add_aux returns error.
Fix this by adjusting the error handling part in tpmi_create_device,
following the function intel_vsec_add_dev.
Fixes: 6a192c0cbf38 ("platform/x86/intel/tpmi: Fix double free reported by Smatch")
Signed-off-by: Dongliang Mu <dzm91@hust.edu.cn>
Link: https://lore.kernel.org/r/20230309040107.534716-2-dzm91@hust.edu.cn
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The first error handling code in intel_vsec_add_aux misses the
deallocation of intel_vsec_dev->resource.
Fix this by adding kfree(intel_vsec_dev->resource) in the error handling
code.
Reviewed-by: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: Dongliang Mu <dzm91@hust.edu.cn>
Link: https://lore.kernel.org/r/20230309040107.534716-4-dzm91@hust.edu.cn
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Direct access to the struct bus_type dev_root pointer is going away soon
so replace that with a call to bus_get_dev_root() instead, which is what
it is there for.
Cc: Mark Gross <markgross@kernel.org>
Cc: platform-driver-x86@vger.kernel.org
Acked-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20230313182918.1312597-5-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There is no need to manually set the owner of a struct class, as the
registering function does it automatically, so remove all of the
explicit settings from various drivers that did so as it is unneeded.
This allows us to remove this pointer entirely from this structure going
forward.
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Link: https://lore.kernel.org/r/20230313181843.1207845-2-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
To support S3/S4 with TPMI interface add suspend/resume callbacks.
Here HW state is stored in suspend callback and restored during
resume callback.
The hardware state which needs to be stored/restored:
- CLOS configuration
- CLOS Association
- SST-CP enable/disable status
- SST-PP perf level setting
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Suggested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Pragya Tanwar <pragya.tanwar@intel.com>
Link: https://lore.kernel.org/r/20230308070642.1727167-9-srinivas.pandruvada@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The support of Intel Speed Select Technology - Turbo Frequency (SST-TF)
feature enables the ability to set different “All core turbo ratio
limits” to cores based on the priority. By using this feature, some cores
can be configured to get higher turbo frequency by designating them as
high priority at the cost of lower or no turbo frequency on the low
priority cores.
One new IOCTLs are added:
ISST_IF_GET_TURBO_FREQ_INFO : Get information about turbo frequency
buckets
Once an instance is identified, read or write from correct MMIO
offset for a given field as defined in the specification.
For details on SST-TF operations using intel-speed-selet utility,
refer to:
Documentation/admin-guide/pm/intel-speed-select.rst
under the kernel documentation
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Pragya Tanwar <pragya.tanwar@intel.com>
Link: https://lore.kernel.org/r/20230308070642.1727167-8-srinivas.pandruvada@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The Intel Speed Select Technology - Base Frequency (SST-BF) feature lets
the user control base frequency. If some critical workload threads demand
constant high guaranteed performance, then this feature can be used to
execute the thread at higher base frequency on specific sets of CPUs
(high priority CPUs) at the cost of lower base frequency (low priority
CPUs) on other CPUs.
Two new IOCTLs are added:
ISST_IF_GET_BASE_FREQ_INFO : Get frequency information for high and
low priority CPUs
ISST_IF_GET_BASE_FREQ_CPU_MASK : CPUs capable of higher frequency
Once an instance is identified, read or write from correct MMIO
offset for a given field as defined in the specification.
For details on SST-BF operations using intel-speed-selet utility,
refer to:
Documentation/admin-guide/pm/intel-speed-select.rst
under the kernel documentation
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Pragya Tanwar <pragya.tanwar@intel.com>
Link: https://lore.kernel.org/r/20230308070642.1727167-7-srinivas.pandruvada@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
This Intel Speed Select Technology - Performance Profile (SST-PP) feature
introduces a mechanism that allows multiple optimized performance profiles
per system. Each profile defines a set of CPUs that need to be online and
rest offline to sustain a guaranteed base frequency.
Five new IOCTLs are added:
ISST_IF_PERF_LEVELS : Get number of performance levels
ISST_IF_PERF_SET_LEVEL : Set to a new performance level
ISST_IF_PERF_SET_FEATURE : Activate SST-BF/SST-TF for a performance level
ISST_IF_GET_PERF_LEVEL_INFO : Get parameters for a performance level
ISST_IF_GET_PERF_LEVEL_CPU_MASK : Get CPU mask for a performance level
Once an instance is identified, read or write from correct MMIO
offset for a given field as defined in the specification.
For details on SST PP operations using intel-speed-selet utility,
refer to:
Documentation/admin-guide/pm/intel-speed-select.rst
under the kernel documentation
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Pragya Tanwar <pragya.tanwar@intel.com>
Link: https://lore.kernel.org/r/20230308070642.1727167-6-srinivas.pandruvada@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Intel Speed Select Technology Core Power (SST-CP) is an interface that
allows users to define per core priority. This defines a mechanism to
distribute power among cores when there is a power constrained
scenario. This defines a class of service (CLOS) configuration.
Three new IOCTLs are added:
ISST_IF_CORE_POWER_STATE : Enable/Disable SST-CP
ISST_IF_CLOS_PARAM : Configure CLOS parameters
ISST_IF_CLOS_ASSOC : Associate CPUs to a CLOS
To associate CPUs to CLOS, either Linux CPU numbering or PUNIT numbering
scheme can be used, using parameter punit_cpu_map (1: for PUNIT numbering
0 for Linux CPU number).
There is no change to IOCTL to get PUNIT CPU number for a CPU.
Introduce get_instance() function, which is used by majority of IOCTLs
processing to convert a socket and power domain to
tpmi_per_power_domain_info * instance. This instance has all the MMIO
offsets stored to read a particular field.
Once an instance is identified, read or write from correct MMIO
offset for a given field as defined in the specification.
For details on SST CP operations using intel-speed-selet utility,
refer to:
Documentation/admin-guide/pm/intel-speed-select.rst
under the kernel documentation
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Pragya Tanwar <pragya.tanwar@intel.com>
Link: https://lore.kernel.org/r/20230308070642.1727167-5-srinivas.pandruvada@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
SST registers are presented to OS in multi-layer structures starting
with a SST header showing version information freezing current
definition.
For details on SST terminology refer to
Documentation/admin-guide/pm/intel-speed-select.rst
under the kernel documentation
SST TPMI details are published in the following document:
https://github.com/intel/tpmi_power_management/blob/main/SST_TPMI_public_disclosure_FINAL.docx
SST MMIO structure layout follows:
SST-HEADER
SST-CP Header
SST-CP CONTROL
SST-CP STATUS
SST-CP CONFIG0
SST-CP CONFIG1
...
...
SST-PP Header
SST-PP OFFSET_0
SST-PP OFFSET_1
SST_PP_0_INFO
SST_PP_1_INFO
SST_PP_2_INFO
SST_PP_3_INFO
SST-PP CONTROL
SST-PP STATUS
Each register bank contains information to get to next lower level
information. This information is parsed and stored in the struct
tpmi_per_power_domain_info for each domain. This information is
used to process each SST requests.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Pragya Tanwar <pragya.tanwar@intel.com>
Link: https://lore.kernel.org/r/20230308070642.1727167-4-srinivas.pandruvada@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Enumerate TPMI SST driver and create basic framework to add more
features.
The basic user space interface is still same as the legacy using
/dev/isst_interface. Users of "intel-speed-select" utility should
be able to use same commands as prior gens without being aware
of new underlying hardware interface.
TPMI SST driver enumerates on device "intel_vsec.tpmi-sst". Since there
can be multiple instances and there is one common SST core, split
implementation into two parts: A common core part and an enumeration
part. The enumeration driver is loaded for each device instance and
register with the TPMI SST core driver.
On very first enumeration the TPMI SST core driver register with SST
core driver to get IOCTL callbacks. The api_version is incremented
for IOCTL ISST_IF_GET_PLATFORM_INFO, so that user space can issue
new IOCTLs.
Each TPMI package contains multiple power domains. Each power domain
has its own set of SST controls. For each domain map the MMIO memory
and update per domain struct tpmi_per_power_domain_info. This information
will be used to implement other SST interfaces.
Implement first IOCTL commands to get number of TPMI SST instances
and instance mask as some of the power domains may not have any
SST controls.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Pragya Tanwar <pragya.tanwar@intel.com>
Link: https://lore.kernel.org/r/20230308070642.1727167-3-srinivas.pandruvada@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
To map Linux CPU numbering scheme to hardware CPU numbering scheme
MSR 0x53 is getting used. But for new generation of CPUs, this MSR
is not valid. Since this is model specific MSR, this is possible.
A new MSR 0x54 is defined for this purpose. User space can use the
API version to distinguish format from MSR 0x53.
Intel speed select utility is updated to use the new format based
on the API version.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Pragya Tanwar <pragya.tanwar@intel.com>
Link: https://lore.kernel.org/r/20230308070642.1727167-2-srinivas.pandruvada@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Add a new driver for the power-, wake- and reset-source functionality
of the Bay Trail (BYT) version of the Crystal Cove PMIC.
The main functionality here is detecting which power-sources (USB /
DC in / battery) are active. This is normally exposed to userspace as
a power_supply class charger device with an online sysfs attribute.
But if a charger is online or not is already exposed on BYT-CRC devices
through either an ACPI AC power_supply device, or through a native driver
for the battery charger chip (e.g. a BQ24292i).
So instead of adding duplicate info under the power_supply class this
driver exports the info through debugfs and likewise adds debugfs files
for the reset- and wake-source info / registers.
Despite this driver only exporting debugfs bits it is still useful to
have this driver because it clears the wake- and reset-source registers
after reading them. Not clearing these can have undesirable side-effects.
Specifically if the WAKESRC register contains 0x01 (wake by powerbutton)
on reboot then the firmware on some tablets turns the reboot into
a poweroff. I guess this may be necessary to make long power-presses turn
into a poweroff somehow?
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230303221928.285477-1-hdegoede@redhat.com
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230302144732.1903781-26-u.kleine-koenig@pengutronix.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230302144732.1903781-25-u.kleine-koenig@pengutronix.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230302144732.1903781-24-u.kleine-koenig@pengutronix.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230302144732.1903781-23-u.kleine-koenig@pengutronix.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230302144732.1903781-22-u.kleine-koenig@pengutronix.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230302144732.1903781-21-u.kleine-koenig@pengutronix.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230302144732.1903781-20-u.kleine-koenig@pengutronix.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230302144732.1903781-19-u.kleine-koenig@pengutronix.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230302144732.1903781-18-u.kleine-koenig@pengutronix.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230302144732.1903781-17-u.kleine-koenig@pengutronix.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230302144732.1903781-16-u.kleine-koenig@pengutronix.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Add the INT347E GPIO lookup table to the board data for the Surface
Go 3. This is necessary to allow the ov7251 IR camera to probe
properly on that platform.
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Link: https://lore.kernel.org/r/20230302102611.314341-1-dan.scally@ideasonboard.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
User space can get the API version using IOCTL
ISST_IF_GET_PLATFORM_INFO. This information can be used to get IOCTLs
supported by the kernel driver. This version is hardcoded in the driver.
Allow the registered client to specify the supported API version. In
this way a registered client can specify a higher API version to extend
IOCTL set.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20230211063257.311746-5-srinivas.pandruvada@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
|
|
The common IOCTL handler has a predefined list of IOCTLs it can
handle. There is no default handler, if there is no match.
Allow a client driver to define their own version of default IOCTL
callback. In this way the default handling is passed to the client
drivers to handle.
With the introduction of TPMI target, IOCTL list is extended. The
additional TPMI specific IOCTLs will be passed to the TPMI client
driver default IOCTL handler.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20230211063257.311746-4-srinivas.pandruvada@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
|
|
Add TPMI as one of the device type which can be registered with ISST
common driver.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20230211063257.311746-3-srinivas.pandruvada@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
|
|
Fix warning displayed for "make W=1" for kernel documentation.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20230211063257.311746-2-srinivas.pandruvada@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
|
|
Fix warning:
drivers/platform/x86/intel/tpmi.c:253 tpmi_create_device()
warn: 'feature_vsec_dev' was already freed.
If there is some error, feature_vsec_dev memory is freed as part
of resource managed call intel_vsec_add_aux(). So, additional
kfree() call is not required.
Reordered res allocation and feature_vsec_dev, so that on error
only res is freed.
Reported-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/platform-driver-x86/Y%2FxYR7WGiPayZu%2FR@kili/T/#u
Fixes: 47731fd2865f ("platform/x86/intel: Intel TPMI enumeration driver")
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20230227140614.2913474-1-srinivas.pandruvada@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
|
|
A new command CONFIG_TDP_GET_RATIO_INFO is added, with sub command type
of 0x0C. The previous range of valid sub commands was from 0x00 to 0x0B.
Change the valid range from 0x00 to 0x0C.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20230227053504.2734214-1-srinivas.pandruvada@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
- AMD PMC: Improvements to aid s2idle debugging
- Dell WMI-DDV: hwmon support
- INT3472 camera sensor power-management: Improve privacy LED support
- Intel VSEC: Base TPMI (Topology Aware Register and PM Capsule
Interface) support
- Mellanox: SN5600 and Nvidia L1 switch support
- Microsoft Surface Support: Various cleanups + code improvements
- tools/intel-speed-select: Various improvements
- Miscellaneous other cleanups / fixes
* tag 'platform-drivers-x86-v6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (80 commits)
platform/x86: nvidia-wmi-ec-backlight: Add force module parameter
platform/x86/amd/pmf: Add depends on CONFIG_POWER_SUPPLY
platform/x86: dell-ddv: Prefer asynchronous probing
platform/x86: dell-ddv: Add hwmon support
Documentation/ABI: Add new attribute for mlxreg-io sysfs interfaces
platform: mellanox: mlx-platform: Move bus shift assignment out of the loop
platform: mellanox: mlx-platform: Add mux selection register to regmap
platform_data/mlxreg: Add field with mapped resource address
platform/mellanox: mlxreg-hotplug: Allow more flexible hotplug events configuration
platform: mellanox: Extend all systems with I2C notification callback
platform: mellanox: Split logic in init and exit flow
platform: mellanox: Split initialization procedure
platform: mellanox: Introduce support of new Nvidia L1 switch
platform: mellanox: Introduce support for next-generation 800GB/s switch
platform: mellanox: Cosmetic changes - rename to more common name
platform: mellanox: Change "reset_pwr_converter_fail" attribute
platform: mellanox: Introduce support for rack manager switch
MAINTAINERS: dell-wmi-sysman: drop Divya Bharathi
x86/platform/uv: Make kobj_type structure constant
platform/x86: think-lmi: Make kobj_type structure constant
...
|
|
ID alloc and free functions don't have in built protection for parallel
invocation of ida_alloc() and ida_free(). With the current flow in the
vsec driver, there is no such scenario. But add mutex protection for
potential future changes.
Suggested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20230207125821.3837799-1-srinivas.pandruvada@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
int3472 now fails to link when the LED support is disabled:
x86_64-linux-ld: drivers/platform/x86/intel/int3472/led.o: in function `skl_int3472_register_pled':
led.c:(.text+0xf4): undefined reference to `led_classdev_register_ext'
x86_64-linux-ld: led.c:(.text+0x131): undefined reference to `led_add_lookup'
x86_64-linux-ld: drivers/platform/x86/intel/int3472/led.o: in function `skl_int3472_unregister_pled':
led.c:(.text+0x16b): undefined reference to `led_remove_lookup'
x86_64-linux-ld: led.c:(.text+0x177): undefined reference to `led_classdev_unregister'
Add an explicit Kconfig dependency.
Fixes: 5ae20a8050d0 ("platform/x86: int3472/discrete: Create a LED class device for the privacy LED")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://lore.kernel.org/r/20230208163658.2129009-1-arnd@kernel.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
acpi_evaluate_dsm_typed() already verifies the type is the requested type,
so this error check is a no-op, drop it.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230204110223.54625-1-hdegoede@redhat.com
|
|
Add Meteor Lake PMT telemetry support.
Signed-off-by: Gayatri Kammela <gayatri.kammela@linux.intel.com>
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20230203011716.1078003-1-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Add interface to get resources and platform data. This will avoid code
duplication. These interfaces includes:
- Get resource count
- Get resource at an index
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20230202010738.2186174-7-srinivas.pandruvada@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
There is one Intel Out-of-Band (OOB) PCI device per CPU package. Since
TPMI feature is exposed via OOB PCI device, there will be multiple
TPMI device instances on a multi CPU package system.
There are several PM features, which needs to associate APIC based CPU
package ID information to a TPMI instance. For example if Intel Speed
Select feature requires control of a CPU package, it needs to identify
right TPMI device instance.
There is one special TPMI ID (ID = 0x81) in the PFS. The MMIO
region of this TPMI ID points to a mapping table:
- PCI Bus ID
- PCI Device ID
- APIC based Package ID
This mapping information can be used by any PM feature driver which
requires mapping from a CPU package to a TPMI device instance.
Unlike other TPMI features, device node is not created for this feature
ID (0x81). Instead store the mapping information as platform data, which
is part of the per PCI device TPMI instance (struct intel_tpmi_info).
Later the TPMI feature drivers can get the mapping information using an
interface "tpmi_get_platform_data()"
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20230202010738.2186174-6-srinivas.pandruvada@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The TPMI (Topology Aware Register and PM Capsule Interface) provides a
flexible, extendable and PCIe enumerable MMIO interface for PM features.
For example Intel RAPL (Running Average Power Limit) provides a MMIO
interface using TPMI. This has advantage over traditional MSR
(Model Specific Register) interface, where a thread needs to be scheduled
on the target CPU to read or write. Also the RAPL features vary between
CPU models, and hence lot of model specific code. Here TPMI provides an
architectural interface by providing hierarchical tables and fields,
which will not need any model specific implementation.
The TPMI interface uses a PCI VSEC structure to expose the location of
MMIO region.
This VSEC structure is present in the PCI configuration space of the
Intel Out-of-Band (OOB) device, which is handled by the Intel VSEC
driver. The Intel VSEC driver parses VSEC structures present in the PCI
configuration space of the given device and creates an auxiliary device
object for each of them. In particular, it creates an auxiliary device
object representing TPMI that can be bound by an auxiliary driver.
Introduce a TPMI driver that will bind to the TPMI auxiliary device
object created by the Intel VSEC driver.
The TPMI specification defines a PFS (PM Feature Structure) table.
This table is present in the TPMI MMIO region. The starting address
of PFS is derived from the tBIR (Bar Indicator Register) and "Address"
field from the VSEC header.
Each TPMI PM feature has one entry in the PFS with a unique TPMI
ID and its access details. The TPMI driver creates device nodes
for the supported PM features.
The names of the devices created by the TPMI driver start with the
"intel_vsec.tpmi-" prefix which is followed by a specific name of the
given PM feature (for example, "intel_vsec.tpmi-rapl.0").
The device nodes are create by using interface "intel_vsec_add_aux()"
provided by the Intel VSEC driver.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20230202010738.2186174-5-srinivas.pandruvada@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Add fields to struct intel_vsec_device, so that core module (which
creates aux bus devices) can pass private data to the client drivers.
For example there is one vsec device instance per CPU package. On a
multi package system, this private data can be used to pass the package
ID. This package id can be used by client drivers to change power
settings for a specific CPU package by targeting MMIO space of the
correct PCI device.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20230202010738.2186174-4-srinivas.pandruvada@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Remove static for intel_vsec_add_aux() and export this interface so that
it can be used by other vsec related modules.
This driver creates aux devices by parsing PCI-VSEC, which allows
individual drivers to load on those devices. Those driver may further
create more devices on aux bus by parsing the PCI MMIO region.
For example, TPMI (Topology Aware Register and PM Capsule Interface)
creates device nodes for power management features by parsing MMIO region.
When TPMI driver creates devices, it can reuse existing function
intel_vsec_add_aux() to create aux devices with TPMI device as the parent.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20230202010738.2186174-3-srinivas.pandruvada@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Add TPMI (Topology Aware Register and PM Capsule Interface) VSEC ID to
create an aux device. This will allow TPMI driver to enumerate on this
aux device.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20230202010738.2186174-2-srinivas.pandruvada@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
According to:
https://github.com/intel/ipu6-drivers/blob/master/patch/int3472-support-independent-clock-and-LED-gpios-5.17%2B.patch
Bits 31-24 of the _DSM pin entry integer value codes the active-value,
that is the actual physical signal (0 or 1) which needs to be output on
the pin to turn the sensor chip on (to make it active).
So if bits 31-24 are 0 for a reset pin, then the actual value of the reset
pin needs to be 0 to take the chip out of reset. IOW in this case the reset
signal is active-high rather then the default active-low.
And if bits 31-24 are 0 for a clk-en pin then the actual value of the clk
pin needs to be 0 to enable the clk. So in this case the clk-en signal
is active-low rather then the default active-high.
IOW if bits 31-24 are 0 for a pin, then the default polarity of the pin
is inverted.
Add a check for this and also propagate this new polarity to the clock
registration.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://lore.kernel.org/r/20230127203729.10205-6-hdegoede@redhat.com
|
