| Age | Commit message (Collapse) | Author |
|---|
|
[ Upstream commit dd0f05b98925111f4530d7dab774398cdb32e9e3 ]
CZ.NIC's Turris devices are based on Marvell EBU SoCs. Hence add a
dependency on ARCH_MVEBU, to prevent asking the user about these drivers
when configuring a kernel that cannot run on an affected CZ.NIC Turris
system.
Fixes: 992f1a3d4e88498d ("platform: cznic: Add preliminary support for Turris Omnia MCU")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.
auto-generated by the following:
for i in `git grep -l -w asm/unaligned.h`; do
sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"The driver updates seem larger this time around, with changes is many
of the SoC specific drivers, both the custom drivers/soc ones and the
closely related subsystems (memory, bus, firmware, reset, ...).
The at91 platform gains support for sam9x7 chips in the soc and power
management code. This is the latest variant of one of the oldest still
supported SoC families, using the ARM9 (ARMv5) core.
As usual, the qualcomm snapdragon platform gets a ton of updates in
many of their drivers to add more features and additional SoC support.
Most of these are somewhat firmware related as the platform has a
number of firmware based interfaces to the kernel. A notable addition
here is the inclusion of trace events to two of these drivers.
Herve Codina and Christophe Leroy are now sending updates for
drivers/soc/fsl/ code through the SoC tree, this contains both PowerPC
and Arm specific platforms and has previously been problematic to
maintain. The first update here contains support for newer PowerPC
variants and some cleanups.
The turris mox firmware driver has a number of updates, mostly
cleanups.
The Arm SCMI firmware driver gets a major rework to modularize the
existing code into separately loadable drivers for the various
transports, the addition of custom NXP i.MX9 interfaces and a number
of smaller updates.
The Arm FF-A firmware driver gets a feature update to support the v1.2
version of the specification.
The reset controller drivers have some smaller cleanups and a newly
added driver for the Intel/Mobileye EyeQ5/EyeQ6 MIPS SoCs.
The memory controller drivers get some cleanups and refactoring for
Tegra, TI, Freescale/NXP and a couple more platforms.
Finally there are lots of minor updates to firmware (raspberry pi,
tegra, imx), bus (sunxi, omap, tegra) and soc (rockchips, tegra,
amlogic, mediatek) drivers and their DT bindings"
* tag 'soc-drivers-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (212 commits)
firmware: imx: remove duplicate scmi_imx_misc_ctrl_get()
platform: cznic: turris-omnia-mcu: Fix error check in omnia_mcu_register_trng()
bus: sunxi-rsb: Simplify code with dev_err_probe()
soc: fsl: qe: ucc: Export ucc_mux_set_grant_tsa_bkpt
soc: fsl: cpm1: qmc: Fix dependency on fsl_soc.h
dt-bindings: arm: rockchip: Add rk3576 compatible string to pmu.yaml
soc: fsl: qbman: Remove redundant warnings
soc: fsl: qbman: Use iommu_paging_domain_alloc()
MAINTAINERS: Add QE files related to the Freescale QMC controller
soc: fsl: cpm1: qmc: Handle QUICC Engine (QE) soft-qmc firmware
soc: fsl: cpm1: qmc: Add support for QUICC Engine (QE) implementation
soc: fsl: qe: Add missing PUSHSCHED command
soc: fsl: qe: Add resource-managed muram allocators
soc: fsl: cpm1: qmc: Introduce qmc_version
soc: fsl: cpm1: qmc: Rename SCC_GSMRL_MODE_QMC
soc: fsl: cpm1: qmc: Handle RPACK initialization
soc: fsl: cpm1: qmc: Rename qmc_chan_command()
soc: fsl: cpm1: qmc: Introduce qmc_{init,exit}_xcc() and their CPM1 version
soc: fsl: cpm1: qmc: Introduce qmc_init_resource() and its CPM1 version
soc: fsl: cpm1: qmc: Re-order probe() operations
...
|
|
There is still a build failure when the rwrng support is in a loadable
module but the mcu driver is built-in:
arm-linux-gnueabi-ld: drivers/platform/cznic/turris-omnia-mcu-trng.o: in function `omnia_mcu_register_trng':
turris-omnia-mcu-trng.c:(.text.omnia_mcu_register_trng+0x11c): undefined reference to `devm_hwrng_register'
Change the dependency to explicitly disallow the broken
configuration.
Fixes: 41bb142a4028 ("platform: cznic: turris-omnia-mcu: Add support for MCU provided TRNG")
Reviewed-by: Marek Behún <kabel@kernel.org>
Link: https://lore.kernel.org/r/20240909110417.247453-1-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The gpiod_to_irq() function never returns zero. It returns negative
error codes or a positive IRQ number. Update the checking to check
for negatives.
Fixes: 41bb142a4028 ("platform: cznic: turris-omnia-mcu: Add support for MCU provided TRNG")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Make the GPIO part of the driver optional, under a boolean config
option. Move the dependency to GPIOLIB and OF and the selection of
GPIOLIB_IRQCHIP to this new option.
This makes the turris-omnia-mcu driver available for compilation even if
GPIOLIB or OF are disabled.
Fixes: ed46f1f7731d ("platform: cznic: turris-omnia-mcu: fix Kconfig dependencies")
Signed-off-by: Marek Behún <kabel@kernel.org>
Link: https://lore.kernel.org/r/20240719085756.30598-5-kabel@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Make the system poweroff and RTC wakeup part of the driver optional,
under a boolean config option. Move the dependency to RTC_CLASS to this
new option.
This makes the turris-omnia-mcu driver available for compilation even if
RTC_CLASS is disabled.
Fixes: ed46f1f7731d ("platform: cznic: turris-omnia-mcu: fix Kconfig dependencies")
Signed-off-by: Marek Behún <kabel@kernel.org>
Link: https://lore.kernel.org/r/20240719085756.30598-4-kabel@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Make the TRNG part of the driver optional, under a boolean config
option.
This makes the driver turris-omnia-mcu available for compilation even if
HW_RANDOM is disabled.
Fixes: ed46f1f7731d ("platform: cznic: turris-omnia-mcu: fix Kconfig dependencies")
Signed-off-by: Marek Behún <kabel@kernel.org>
Link: https://lore.kernel.org/r/20240719085756.30598-3-kabel@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Make the watchdog part of the driver optional, under a boolean config
option. Move the dependency to WATCHDOG to this new option, and change
the WATCHDOG_CORE dependency to selection, as is done in most watchdog
drivers.
This makes the turris-omnia-mcu driver available for compilation even if
WATCHDOG is disabled.
Fixes: ed46f1f7731d ("platform: cznic: turris-omnia-mcu: fix Kconfig dependencies")
Signed-off-by: Marek Behún <kabel@kernel.org>
Link: https://lore.kernel.org/r/20240719085756.30598-2-kabel@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The newly added driver causes a Kconfig warning:
WARNING: unmet direct dependencies detected for RTC_CLASS
Depends on [n]: !S390 [=y]
Selected by [m]:
- TURRIS_OMNIA_MCU [=m] && CZNIC_PLATFORMS [=y] && (MACH_ARMADA_38X || COMPILE_TEST [=y]) && I2C [=m] && OF [=y] && WATCHDOG [=y]
The problem here is that it selects entire subsystems, which normal
device drivers should not do. Changes all of these to 'depends on'
instead.
Fixes: dfa556e45ae9e ("platform: cznic: turris-omnia-mcu: Add support for MCU connected GPIOs")
Fixes: 90e700fd12b61 ("platform: cznic: turris-omnia-mcu: Add support for poweroff and wakeup")
Fixes: ab89fb5fb92c7 ("platform: cznic: turris-omnia-mcu: Add support for MCU watchdog")
Fixes: 41bb142a40289 ("platform: cznic: turris-omnia-mcu: Add support for MCU provided TRNG")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add depend on WATCHDOG, otherwise modpost fails with
ERROR: modpost: "watchdog_init_timeout" [drivers/platform/cznic/turris-omnia-mcu.ko] undefined!
ERROR: modpost: "devm_watchdog_register_device" [drivers/platform/cznic/turris-omnia-mcu.ko] undefined!
Fixes: ab89fb5fb92c ("platform: cznic: turris-omnia-mcu: Add support for MCU watchdog")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202407040711.g19y3cWq-lkp@intel.com/
Signed-off-by: Marek Behún <kabel@kernel.org>
Link: https://lore.kernel.org/r/20240708114002.4285-3-kabel@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add depend on OF, otherwise the compilation fails with
error: no member named 'of_gpio_n_cells' in 'struct gpio_chip'
error: no member named 'of_xlate' in 'struct gpio_chip'
Fixes: dfa556e45ae9 ("platform: cznic: turris-omnia-mcu: Add support for MCU connected GPIOs")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202407031646.trNSwajF-lkp@intel.com/
Signed-off-by: Marek Behún <kabel@kernel.org>
Link: https://lore.kernel.org/r/20240708114002.4285-2-kabel@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add support for true random number generator provided by the MCU.
New Omnia boards come without the Atmel SHA204-A chip. Instead the
crypto functionality is provided by new microcontroller, which has
a TRNG peripheral.
Signed-off-by: Marek Behún <kabel@kernel.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20240701113010.16447-7-kabel@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add support for the watchdog mechanism provided by the MCU.
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20240701113010.16447-6-kabel@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add support for true board poweroff (MCU can disable all unnecessary
voltage regulators) and wakeup at a specified time, implemented via a
RTC driver so that the rtcwake utility can be used to configure it.
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20240701113010.16447-5-kabel@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add support for GPIOs connected to the MCU on the Turris Omnia board.
This includes:
- front button pin
- enable pins for USB regulators
- MiniPCIe / mSATA card presence pins in MiniPCIe port 0
- LED output pins from WAN ethernet PHY, LAN switch and MiniPCIe ports
- on board revisions 32+ also various peripheral resets and another
voltage regulator enable pin
Signed-off-by: Marek Behún <kabel@kernel.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20240701113010.16447-4-kabel@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add the basic skeleton for a new platform driver for the microcontroller
found on the Turris Omnia board.
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20240701113010.16447-3-kabel@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
