summaryrefslogtreecommitdiff
path: root/drivers/pinctrl
AgeCommit message (Collapse)Author
2022-12-29pinctrl: da850-pupd: Drop empty platform remove functionUwe Kleine-König
A remove callback just returning 0 is equivalent to no remove callback at all. So drop the useless function. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20221213182125.929303-1-u.kleine-koenig@pengutronix.de Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-12-29pinctrl: amd: Add Z-state wake control bitsBasavaraj Natikar
GPIO registers include Bit 27 for WakeCntrlZ used to enable wake in Z state. Hence add Z-state wake control bits to debugfs output to debug and analyze Z-states problems. Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com> Suggested-by: Mario Limonciello <mario.limonciello@amd.com> Tested-by: Guruvendra Punugupati <Guruvendra.Punugupati@amd.com> Link: https://lore.kernel.org/r/20221208093704.1151928-1-Basavaraj.Natikar@amd.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-12-28pinctrl: intel: Define maximum pad number in the groupAndy Shevchenko
Instead of using hard coded magic number here and there, define maximum pad number in the group in newly added INTEL_PINCTRL_MAX_GPP_SIZE. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2022-12-28pinctrl: intel: Use same order of bit fields for PADCFG2Andy Shevchenko
PADCFG0 and PADCFG1 are ordered from MSB to LSB, do the same for PADCFG2 bit fields. No functional changes intended. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2022-12-28pinctrl: intel: Add ~4k bias supportAndy Shevchenko
All versions that have 20k and 5k resistance, i.e. all that the driver supports, may support ~4k when the above mentioned are connected in parallel. Add such a support. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2022-12-28pinctrl: intel: Add definitions to all possible biasesAndy Shevchenko
Add definitions to all possible biases, i.e. add ~800 Ohms, ~952 Ohms, ~4 kOhms. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2022-12-28pinctrl: intel: Deduplicate some code in intel_config_set_pull()Andy Shevchenko
First part is to assign default argument for all cases, since bias disablement doesn't use it anyway. Second part is to clear all bits in the bias setting and depending on the argument and parameter set them as asked. While at it, add break statement to the default cases. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2022-12-27pinctrl: intel: Add default case to intel_config_set_pull()Andy Shevchenko
For the sake of symmetry with intel_config_get_pull(), add a default case to the outer switch. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2022-12-27pinctrl: intel: Convert to generic_handle_domain_irq()Andy Shevchenko
Replace construct that matches generic_handle_irq(irq_find_mapping()) to a single call to generic_handle_domain_irq(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2022-12-27pinctrl: intel: Always use gpp_num_padown_regs in the main driverAndy Shevchenko
For the size-based communities, always use gpp_num_padown_regs, which is now provided explicitly via INTEL_COMMUNITY_SIZE() macro. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2022-12-27pinctrl: sunrisepoint: Replace SPT_COMMUNITY() by INTEL_COMMUNITY_*()Andy Shevchenko
Use INTEL_COMMUNITY_*() common macro instead custom SPT_COMMUNITY(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2022-12-27pinctrl: tigerlake: Replace TGL_COMMUNITY() by INTEL_COMMUNITY_GPPS()Andy Shevchenko
Use INTEL_COMMUNITY_GPPS() common macro instead custom TGL_COMMUNITY(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2022-12-27pinctrl: meteorlake: Replace MTL_COMMUNITY() by INTEL_COMMUNITY_GPPS()Andy Shevchenko
Use INTEL_COMMUNITY_GPPS() common macro instead custom MTL_COMMUNITY(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2022-12-27pinctrl: lewisburg: Replace LBG_COMMUNITY() by INTEL_COMMUNITY_SIZE()Andy Shevchenko
Use INTEL_COMMUNITY_SIZE() common macro instead custom LBG_COMMUNITY(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2022-12-27pinctrl: lakefield: Replace LKF_COMMUNITY() by INTEL_COMMUNITY_GPPS()Andy Shevchenko
Use INTEL_COMMUNITY_GPPS() common macro instead custom LKF_COMMUNITY(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2022-12-27pinctrl: jasperlake: Replace JSL_COMMUNITY() by INTEL_COMMUNITY_GPPS()Andy Shevchenko
Use INTEL_COMMUNITY_GPPS() common macro instead custom JSL_COMMUNITY(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2022-12-27pinctrl: icelake: Replace ICL_COMMUNITY() by INTEL_COMMUNITY_GPPS()Andy Shevchenko
Use INTEL_COMMUNITY_GPPS() common macro instead custom ICL_COMMUNITY(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2022-12-27pinctrl: geminilake: Replace GLK_COMMUNITY() by INTEL_COMMUNITY_SIZE()Andy Shevchenko
Use INTEL_COMMUNITY_SIZE() common macro instead custom GLK_COMMUNITY(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2022-12-27pinctrl: emmitsburg: Replace EBG_COMMUNITY() by INTEL_COMMUNITY_GPPS()Andy Shevchenko
Use INTEL_COMMUNITY_GPPS() common macro instead custom EBG_COMMUNITY(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2022-12-27pinctrl: elkhartlake: Replace EHL_COMMUNITY() by INTEL_COMMUNITY_GPPS()Andy Shevchenko
Use INTEL_COMMUNITY_GPPS() common macro instead custom EHL_COMMUNITY(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2022-12-27pinctrl: denverton: Replace DNV_COMMUNITY() by INTEL_COMMUNITY_GPPS()Andy Shevchenko
Use INTEL_COMMUNITY_GPPS() common macro instead custom DNV_COMMUNITY(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2022-12-27pinctrl: cedarfork: Replace CDF_COMMUNITY() by INTEL_COMMUNITY_GPPS()Andy Shevchenko
Use INTEL_COMMUNITY_GPPS() common macro instead custom CDF_COMMUNITY(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2022-12-27pinctrl: cannonlake: Replace CNL_COMMUNITY() by INTEL_COMMUNITY_GPPS()Andy Shevchenko
Use INTEL_COMMUNITY_GPPS() common macro instead custom CNL_COMMUNITY(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2022-12-27pinctrl: broxton: Replace BXT_COMMUNITY() by INTEL_COMMUNITY_SIZE()Andy Shevchenko
Use INTEL_COMMUNITY_SIZE() common macro instead custom BXT_COMMUNITY(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2022-12-27pinctrl: alderlake: Replace ADL_COMMUNITY() by INTEL_COMMUNITY_GPPS()Andy Shevchenko
Use INTEL_COMMUNITY_GPPS() common macro instead custom ADL_COMMUNITY(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2022-12-27pinctrl: intel: Introduce INTEL_COMMUNITY_*() to unify community macrosAndy Shevchenko
Now it becomes visible that we can deduplicate SoC specific *_COMMUNITY() macros across the Intel pin control drivers. For that, introduce a common INTEL_COMMUNITY_GPPS() and INTEL_COMMUNITY_SIZE() macros in the pinctrl-intel.h. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2022-12-13Merge tag 'pinctrl-v6.2-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "The two large chunks is the header clean-up from Andy and the Qualcomm DT bindings clean-up from Krzysztof. Each which could give rise to conflicts, but I haven't seen any. The YAML conversions happening around the device tree is the biggest item in the series and is the result of Rob Herrings ambition to autovalidate these trees against strict schemas and it is paying off in lots of bugs found and ever prettier device trees. Sooner or later the transition will be complete, Krzysztof is fixing up all of the Qualcomm stuff, which is pretty voluminous. Core changes: - minor but nice and important documentation clean-ups New drivers: - subdriver for the Qualcomm SDM670 SoC - subdriver for the Intel Moorefield SoC - trivial support for the NXP Freescale i.MXRT1170 SoC Other changes and improvements - major clean-up of the Qualcomm pin control device tree bindings by Krzysztof - major header clean-up by Andy - some immutable irqchip clean-up for the Actions Semiconductor and Nuvoton drivers - GPIO helpers for The Cypress cy8c95x0 driver - bias handling in the Mediatek MT7986 driver - remove the unused pins-are-numbered concept that never flew" * tag 'pinctrl-v6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (231 commits) pinctrl: thunderbay: fix possible memory leak in thunderbay_build_functions() dt-bindings: pinctrl: st,stm32: Deprecate pins-are-numbered dt-bindings: pinctrl: mediatek,mt65xx: Deprecate pins-are-numbered pinctrl: stm32: Remove check for pins-are-numbered pinctrl: mediatek: common: Remove check for pins-are-numbered pinctrl: qcom: remove duplicate included header files pinctrl: sunxi: d1: Add CAN bus pinmuxes pinctrl: loongson2: Fix some const correctness pinctrl: pinconf-generic: add missing of_node_put() pinctrl: intel: Enumerate PWM device when community has a capability pwm: lpss: Rename pwm_lpss_probe() --> devm_pwm_lpss_probe() pwm: lpss: Allow other drivers to enable PWM LPSS pwm: lpss: Include headers we are the direct user of pwm: lpss: Rename MAX_PWMS --> LPSS_MAX_PWMS pwm: Add a stub for devm_pwmchip_add() pinctrl: k210: call of_node_put() pinctrl: starfive: Use existing variable gpio dt-bindings: pinctrl: semtech,sx150xq: fix match patterns for 16 GPIOs matching pinconf-generic: fix style issues in pin_config_param doc pinctrl: pinctrl-loongson2: fix Kconfig dependency ...
2022-12-06pinctrl: thunderbay: fix possible memory leak in thunderbay_build_functions()Gaosheng Cui
The thunderbay_add_functions() will free memory of thunderbay_funcs when everything is ok, but thunderbay_funcs will not be freed when thunderbay_add_functions() fails, then there will be a memory leak, so we need to add kfree() when thunderbay_add_functions() fails to fix it. In addition, doing some cleaner works, moving kfree(funcs) from thunderbay_add_functions() to thunderbay_build_functions(). Fixes: 12422af8194d ("pinctrl: Add Intel Thunder Bay pinctrl driver") Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com> Reviewed-by: Rafał Miłecki <rafal@milecki.pl> Link: https://lore.kernel.org/r/20221129120126.1567338-1-cuigaosheng1@huawei.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-12-03pinctrl: stm32: Remove check for pins-are-numberedBernhard Rosenkränzer
Remove the check for the unnecessary pins-are-numbered DeviceTree property Signed-off-by: Bernhard Rosenkränzer <bero@baylibre.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20221129023401.278780-3-bero@baylibre.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-12-03pinctrl: mediatek: common: Remove check for pins-are-numberedBernhard Rosenkränzer
Remove the check for the unnecessary pins-are-numbered Devicetree property. Signed-off-by: Bernhard Rosenkränzer <bero@baylibre.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20221129023401.278780-2-bero@baylibre.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-11-28pinctrl: intel: Save and restore pins in "direct IRQ" modeAndy Shevchenko
The firmware on some systems may configure GPIO pins to be an interrupt source in so called "direct IRQ" mode. In such cases the GPIO controller driver has no idea if those pins are being used or not. At the same time, there is a known bug in the firmwares that don't restore the pin settings correctly after suspend, i.e. by an unknown reason the Rx value becomes inverted. Hence, let's save and restore the pins that are configured as GPIOs in the input mode with GPIROUTIOXAPIC bit set. Cc: stable@vger.kernel.org Reported-and-tested-by: Dale Smith <dalepsmith@gmail.com> Reported-and-tested-by: John Harris <jmharris@gmail.com> BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=214749 Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Link: https://lore.kernel.org/r/20221124222926.72326-1-andriy.shevchenko@linux.intel.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-11-28pinctrl: qcom: remove duplicate included header filesye xingchen
linux/seq_file.h is included more than once. Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn> Link: https://lore.kernel.org/r/202211221631577017318@zte.com.cn Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-11-28Merge tag 'intel-pinctrl-v6.2-2' of ↵Linus Walleij
git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/intel into devel intel-pinctrl for v6.2-2 * Enable PWM feature on Intel pin control IPs The following is an automated git shortlog grouped by driver: intel: - Enumerate PWM device when community has a capability pwm: - lpss: Rename pwm_lpss_probe() --> devm_pwm_lpss_probe() - lpss: Allow other drivers to enable PWM LPSS - lpss: Include headers we are the direct user of - lpss: Rename MAX_PWMS --> LPSS_MAX_PWMS - Add a stub for devm_pwmchip_add()
2022-11-26pinctrl: sunxi: d1: Add CAN bus pinmuxesFabien Poussin
The D1 pin controller contains muxes for two CAN buses. While the CAN bus controllers are only documented for the T113 SoC, the pin controller is the same across all SoC variants. Signed-off-by: Fabien Poussin <fabien.poussin@gmail.com> Signed-off-by: Samuel Holland <samuel@sholland.org> Link: https://lore.kernel.org/r/20221126191636.6673-1-samuel@sholland.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-11-25pinctrl: loongson2: Fix some const correctnessLinus Walleij
The kernel robot using sparse is complaining like this: drivers/pinctrl/pinctrl-loongson2.c:212:21: sparse: sparse: incorrect type in argument 1 (different address spaces) @@ expected void const volatile [noderef] __iomem *addr @@ got void *[noderef] __iomem reg @@ (...) I think the problem is simply that the register base is defined as void * __iomem instead of void __iomem * and this is because of the way const correctness works with pointer infix order. Fix it up. I think. Reported-by: kernel test robot <lkp@intel.com> Cc: zhanghongchen <zhanghongchen@loongson.cn> Cc: Yinbo Zhu <zhuyinbo@loongson.cn> Fixes: f73f88acbc18 ("pinctrl: pinctrl-loongson2: add pinctrl driver support") Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-11-25pinctrl: pinconf-generic: add missing of_node_put()ZhangPeng
of_node_put() needs to be called when jumping out of the loop, since for_each_available_child_of_node() will increase the refcount of node. Fixes: c7289500e29d ("pinctrl: pinconf-generic: scan also referenced phandle node") Signed-off-by: ZhangPeng <zhangpeng362@huawei.com> Link: https://lore.kernel.org/r/20221125070156.3535855-1-zhangpeng362@huawei.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-11-22pinctrl: meditatek: Startup with the IRQs disabledRicardo Ribalda
If the system is restarted via kexec(), the peripherals do not start with a known state. If the previous system had enabled an IRQs we will receive unexected IRQs that can lock the system. [ 28.109251] watchdog: BUG: soft lockup - CPU#0 stuck for 26s! [swapper/0:0] [ 28.109263] Modules linked in: [ 28.109273] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.15.79-14458-g4b9edf7b1ac6 #1 9f2e76613148af94acccd64c609a552fb4b4354b [ 28.109284] Hardware name: Google Elm (DT) [ 28.109290] pstate: 40400005 (nZcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 28.109298] pc : __do_softirq+0xa0/0x388 [ 28.109309] lr : __do_softirq+0x70/0x388 [ 28.109316] sp : ffffffc008003ee0 [ 28.109321] x29: ffffffc008003f00 x28: 000000000000000a x27: 0000000000000080 [ 28.109334] x26: 0000000000000001 x25: ffffffefa7b350c0 x24: ffffffefa7b47480 [ 28.109346] x23: ffffffefa7b3d000 x22: 0000000000000000 x21: ffffffefa7b0fa40 [ 28.109358] x20: ffffffefa7b005b0 x19: ffffffefa7b47480 x18: 0000000000065b6b [ 28.109370] x17: ffffffefa749c8b0 x16: 000000000000018c x15: 00000000000001b8 [ 28.109382] x14: 00000000000d3b6b x13: 0000000000000006 x12: 0000000000057e91 [ 28.109394] x11: 0000000000000000 x10: 0000000000000000 x9 : ffffffefa7b47480 [ 28.109406] x8 : 00000000000000e0 x7 : 000000000f424000 x6 : 0000000000000000 [ 28.109418] x5 : ffffffefa7dfaca0 x4 : ffffffefa7dfadf0 x3 : 000000000000000f [ 28.109429] x2 : 0000000000000000 x1 : 0000000000000100 x0 : 0000000001ac65c5 [ 28.109441] Call trace: [ 28.109447] __do_softirq+0xa0/0x388 [ 28.109454] irq_exit+0xc0/0xe0 [ 28.109464] handle_domain_irq+0x68/0x90 [ 28.109473] gic_handle_irq+0xac/0xf0 [ 28.109480] call_on_irq_stack+0x28/0x50 [ 28.109488] do_interrupt_handler+0x44/0x58 [ 28.109496] el1_interrupt+0x30/0x58 [ 28.109506] el1h_64_irq_handler+0x18/0x24 [ 28.109512] el1h_64_irq+0x7c/0x80 [ 28.109519] arch_local_irq_enable+0xc/0x18 [ 28.109529] default_idle_call+0x40/0x140 [ 28.109539] do_idle+0x108/0x290 [ 28.109547] cpu_startup_entry+0x2c/0x30 [ 28.109554] rest_init+0xe8/0xf8 [ 28.109562] arch_call_rest_init+0x18/0x24 [ 28.109571] start_kernel+0x338/0x42c [ 28.109578] __primary_switched+0xbc/0xc4 [ 28.109588] Kernel panic - not syncing: softlockup: hung tasks Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Link: https://lore.kernel.org/r/20221122-mtk-pinctrl-v1-1-bedf5655a3d2@chromium.org Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-11-22pinctrl: intel: Enumerate PWM device when community has a capabilityAndy Shevchenko
Some of the Communities may have PWM capability. In such cases, enumerate the PWM device via respective driver. A user is still responsible for setting correct pin muxing for the line that needs to output the signal. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Thierry Reding <thierry.reding@gmail.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2022-11-22pinctrl: k210: call of_node_put()ZhangPeng
Since for_each_available_child_of_node() will increase the refcount of node, we need to call of_node_put() manually when breaking out of the iteration. Fixes: d4c34d09ab03 ("pinctrl: Add RISC-V Canaan Kendryte K210 FPIOA driver") Signed-off-by: ZhangPeng <zhangpeng362@huawei.com> Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Link: https://lore.kernel.org/r/20221122075853.2496680-1-zhangpeng362@huawei.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-11-22pinctrl: starfive: Use existing variable gpioGeert Uytterhoeven
Use the existing variable "gpio", instead of obtaining the hwirq number again. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com> Link: https://lore.kernel.org/r/3b6b8597792a393d0f21b8489dd933663dfd2b90.1669045778.git.geert+renesas@glider.be Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-11-21pinctrl: single: Fix potential division by zeroMaxim Korotkov
There is a possibility of dividing by zero due to the pcs->bits_per_pin if pcs->fmask() also has a value of zero and called fls from asm-generic/bitops/builtin-fls.h or arch/x86/include/asm/bitops.h. The function pcs_probe() has the branch that assigned to fmask 0 before pcs_allocate_pin_table() was called Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 4e7e8017a80e ("pinctrl: pinctrl-single: enhance to configure multiple pins of different modules") Signed-off-by: Maxim Korotkov <korotkov.maxim.s@gmail.com> Reviewed-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20221117123034.27383-1-korotkov.maxim.s@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-11-21pinctrl: pinctrl-loongson2: fix Kconfig dependencyRen Zhijie
If CONFIG_PINCTRL_LOONGSON2=y and CONFIG_OF is not set, gcc complained about undefined reference: drivers/pinctrl/pinctrl-loongson2.o: In function `pinconf_generic_dt_node_to_map_all': pinctrl-loongson2.c:(.text+0x1c4): undefined reference to `pinconf_generic_dt_node_to_map' To fix this error, add depends on OF to config PINCTRL_LOONGSON2. Fixes: f73f88acbc18 ("pinctrl: pinctrl-loongson2: add pinctrl driver support") Signed-off-by: Ren Zhijie <renzhijie2@huawei.com> Link: https://lore.kernel.org/r/20221121132608.230645-1-renzhijie2@huawei.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-11-20Merge tag 'renesas-pinctrl-for-v6.2-tag1' of ↵Linus Walleij
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel pinctrl: renesas: Updates for v6.2 - Use dynamic GPIO base on combined pincctrl/gpio controllers on SH/R-Mobile SoCs, - Miscellaneous improvements.
2022-11-18Merge tag 'intel-pinctrl-v6.2-1' of ↵Linus Walleij
git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/intel into devel intel-pinctrl for v6.2-1 * Add Intel Moorefield pin control driver * Deduplicate COMMUNITY() macro in the Intel pin control drivers * Switch Freescale GPIO driver to use fwnode instead of of_node * Miscellaneous clenups here and there The following is an automated git shortlog grouped by driver: alderlake: - Deduplicate COMMUNITY macro code cannonlake: - Deduplicate COMMUNITY macro code device property: - Introduce fwnode_device_is_compatible() helper icelake: - Deduplicate COMMUNITY macro code intel: - Add Intel Moorefield pin controller support - Use temporary variable for struct device - Use str_enable_disable() helper merrifield: - Use temporary variable for struct device qcom: - lpass-lpi: Add missed bitfield.h soc: - fsl: qe: Switch to use fwnode instead of of_node sunrisepoint: - Deduplicate COMMUNITY macro code tigerlake: - Deduplicate COMMUNITY macro code
2022-11-17pinctrl: renesas: gpio: Use dynamic GPIO base if no function GPIOsGeert Uytterhoeven
Since commit 502df79b860563d7 ("gpiolib: Warn on drivers still using static gpiobase allocation") in gpio/for-next, one or more warnings are printed during boot on systems where the pin controller also provides GPIO functionality: gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation. Fix this for ARM-based SH/R-Mobile SoCs by: 1. Taking into account a non-zero GPIO base in the various GPIO chip callbacks, 2. Switching to dynamic allocation of the GPIO base when support for legacy function GPIOs is not enabled. On SuperH SoCs using legacy function GPIOs, the GPIO bases of the GPIO controller and the GPIO function controller must not be changed, as all board files rely on the fixed GPIO_* and GPIO_FN_* definitions provided by the various <cpu/sh*.h> header files. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/df2cf30ac4c3cbee726799f32b727c1ebe62819c.1668000684.git.geert+renesas@glider.be
2022-11-17pinctrl: pinctrl-loongson2: add pinctrl driver supportzhanghongchen
The Loongson-2 SoC has a few pins that can be used as GPIOs or take multiple other functions. Add a driver for the pinmuxing. There is currently no support for GPIO pin pull-up and pull-down. Signed-off-by: zhanghongchen <zhanghongchen@loongson.cn> Co-developed-by: Yinbo Zhu <zhuyinbo@loongson.cn> Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn> Link: https://lore.kernel.org/r/20221114024942.8111-1-zhuyinbo@loongson.cn Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-11-15pinctrl: renesas: rzg2l: remove unnecessary check from rzg2l_dt_node_to_map()Biju Das
This patch removes the unnecessary check from rzg2l_dt_node_to_map() as the ret value is already negative. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20221108191309.3908415-1-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-11-15pinctrl: renesas: rzv2m: remove unnecessary check from rzv2m_dt_node_to_map()Biju Das
This patch removes the unnecessary check from rzv2m_dt_node_to_map() as the ret value is already negative. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20221108183223.3902097-1-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-11-15pinctrl: mediatek: Export debounce time tablesLinus Walleij
The kernel test robot complains that in certain combinations when building the Mediatek drivers as modules we lack some debounce table symbols, so export them. Reported-by: kernel test robot <lkp@intel.com> Fixes: e1ff91f9d230 ("pinctrl: mediatek: Fix EINT pins input debounce time configuration") Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-11-14pinctrl: mediatek: Fix EINT pins input debounce time configurationAngeloGioacchino Del Regno
The External Interrupt Controller (EINTC) on all of the supported MediaTek SoCs does support input debouncing, but not all of them index the debounce time values (DBNC_SETTING registers) the same way. Before this change, in some cases, as an example, requesting a debounce time of 16 milliseconds would mistakenly set the relative DBNC_SETTING register to 0x2, resulting in a way shorter debounce time of 500uS. To fix the aforementioned issue, define three different debounce_time arrays, reflecting the correct register index for each value and for each register index variant, and make sure that each SoC pinctrl driver uses the right one. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20221111094106.18486-1-angelogioacchino.delregno@collabora.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-04 11:02:06 +0000