| Age | Commit message (Collapse) | Author |
|---|
|
Since commit 8b41fc4454e ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations
are used to identify modules. As a consequence, uses of the macro
in non-modules will cause modprobe to misidentify their containing
object file as a module when it is not (false positives), and modprobe
might succeed rather than failing with a suitable error message.
So remove it in the files in this commit, none of which can be built as
modules.
Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Suggested-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: linux-modules@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Hitomi Hasegawa <hasegawa-hitomi@fujitsu.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-renesas-soc@vger.kernel.org
Cc: linux-gpio@vger.kernel.org
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
Since commit 8b41fc4454e ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations
are used to identify modules. As a consequence, uses of the macro
in non-modules will cause modprobe to misidentify their containing
object file as a module when it is not (false positives), and modprobe
might succeed rather than failing with a suitable error message.
So remove it in the files in this commit, none of which can be built as
modules.
Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Suggested-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: linux-modules@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Hitomi Hasegawa <hasegawa-hitomi@fujitsu.com>
Cc: Sean Wang <sean.wang@kernel.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: linux-mediatek@lists.infradead.org
Cc: linux-gpio@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
Since commit 8b41fc4454e ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations
are used to identify modules. As a consequence, uses of the macro
in non-modules will cause modprobe to misidentify their containing
object file as a module when it is not (false positives), and modprobe
might succeed rather than failing with a suitable error message.
So remove it in the files in this commit, none of which can be built as
modules.
Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Suggested-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: linux-modules@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Hitomi Hasegawa <hasegawa-hitomi@fujitsu.com>
Cc: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Cc: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
Since commit 8b41fc4454e ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations
are used to identify modules. As a consequence, uses of the macro
in non-modules will cause modprobe to misidentify their containing
object file as a module when it is not (false positives), and modprobe
might succeed rather than failing with a suitable error message.
So remove it in the files in this commit, none of which can be built as
modules.
Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Suggested-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: linux-modules@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Hitomi Hasegawa <hasegawa-hitomi@fujitsu.com>
Cc: Ray Jui <rjui@broadcom.com>
Cc: Scott Branden <sbranden@broadcom.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-gpio@vger.kernel.org
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
Since commit 8b41fc4454e ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations
are used to identify modules. As a consequence, uses of the macro
in non-modules will cause modprobe to misidentify their containing
object file as a module when it is not (false positives), and modprobe
might succeed rather than failing with a suitable error message.
So remove it in the files in this commit, none of which can be built as
modules.
Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Suggested-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: linux-modules@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Hitomi Hasegawa <hasegawa-hitomi@fujitsu.com>
Cc: Avi Fishman <avifishman70@gmail.com>
Cc: Tomer Maimon <tmaimon77@gmail.com>
Cc: Tali Perry <tali.perry1@gmail.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: openbmc@lists.ozlabs.org
Cc: linux-gpio@vger.kernel.org
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
Since commit 8b41fc4454e ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations
are used to identify modules. As a consequence, uses of the macro
in non-modules will cause modprobe to misidentify their containing
object file as a module when it is not (false positives), and modprobe
might succeed rather than failing with a suitable error message.
So remove it in the files in this commit, none of which can be built as
modules.
Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Suggested-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: linux-modules@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Hitomi Hasegawa <hasegawa-hitomi@fujitsu.com>
Cc: "Andreas Färber" <afaerber@suse.de>
Cc: Manivannan Sadhasivam <mani@kernel.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-actions@lists.infradead.org
Cc: linux-gpio@vger.kernel.org
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
This reverts commit b26cd9325be4c1fcd331b77f10acb627c560d4d7.
This patch introduces a regression on Lenovo Z13, which can't wake
from the lid with it applied; and some unspecified AMD based Dell
platforms are unable to wake from hitting the power button
Signed-off-by: Kornel Dulęba <korneld@chromium.org>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20230411134932.292287-1-korneld@chromium.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel
pinctrl: renesas: Updates for v6.4 (take two)
- Retain POCCTRL0 register across s2ram on R-Car D3,
- Add support for Ethernet power-sources on R-Car V3M, V3H, E3, D3,
and V4H,
- Annotate sentinels in tables,
- Add bias pinconf support and PWM pin groups on R-Car H1,
- Miscellaneous fixes and improvements.
|
|
The comment recently added talking about PIN_CONFIG_INPUT_ENABLE is
clearly missing the word "and". Comments live forever, so let's fix
it.
Fixes: e49eabe3e13f ("pinctrl: qcom: Support OUTPUT_ENABLE; deprecate INPUT_ENABLE")
Reported-by: Stephen Boyd <swboyd@chromium.org>
Link: https://chromium-review.googlesource.com/c/chromiumos/third_party/kernel/+/4409769/comment/9a1d5def_e1e71db7/
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20230407142859.1.Ia5d70e320b60d6707c6182879097708e49b8b519@changeid
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Add support for the GPIO controller present on the pmm8654au PMIC.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230327125316.210812-14-brgl@bgdev.pl
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
static
smatch reports
drivers/pinctrl/pinctrl-mlxbf3.c:162:20: warning: symbol
'mlxbf3_pmx_funcs' was not declared. Should it be static?
This variable is only used in one file so it should be static.
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20230404004501.1913144-1-trix@redhat.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Remove Thunder Bay specific code as the product got cancelled
and there are no end customers or users.
Signed-off-by: Lakshmi Sowjanya D <lakshmi.sowjanya.d@intel.com>
Link: https://lore.kernel.org/r/20230403120235.939-1-lakshmi.sowjanya.d@intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
This code are marked as deprecated since kernel 4.5[1]. Downstream OpenWRT
and upstream switched to the new string compatible 7 years ago. The old
compatible strings can safely be dropped.
[1] commit be14811c03cf ("pinctrl/lantiq: introduce new dedicated devicetree bindings")
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Link: https://lore.kernel.org/r/20230330212225.10214-1-olek2@wp.pl
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
If the firmware has misconfigured a GPIO it may cause interrupt
status or wake status bits to be set and not asserted. Add these
to debug output to catch this case.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20230328174231.8924-3-mario.limonciello@amd.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
More fields are to be added, so to keep the display from being
too busy, adjust it.
1) Add a header to all columns
2) Except for interrupt, when fields have no data show empty
3) Remove otherwise blank whitespace
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20230328174231.8924-2-mario.limonciello@amd.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
As the of_node member of struct device always exists, and there is a
dummy of of_device_get_match_data() for the !CONFIG_OF case, there is no
longer a need to protect code using these interfaces with an #ifdef.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/55d72ce46b43ec2f41681cb5ba7ca7fcebdb98d1.1679416005.git.geert+renesas@glider.be
|
|
Add pins, groups, and functions for the PWM Timers on the Renesas R-Car
H1 (R8A7779) SoC.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/cea9723e9c3df4b1408750caa38886aac1fab5f7.1679329090.git.geert+renesas@glider.be
|
|
Implement support for pull-up handling for the R-Car H1 SoC, using the
common R-Car bias handling.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/dd966cfc916ef881051ec53bc3393dce7eea8e03.1679328215.git.geert+renesas@glider.be
|
|
It does not make sense to have a comma after a sentinel, as any new
elements must be added before the sentinel. Hence drop all such commas.
Add comments to clarify the purpose of the empty elements.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/845f1d8285dd44522af1b0f429d4c6bd4759eb9e.1678272180.git.geert+renesas@glider.be
|
|
Add support for configuring the I/O voltage levels of the Ethernet AVB
and Ethernet TSN pins on the R-Car V4H SoC. "PIN_VDDQ_AVB[012]" and
"PIN_VDDQ_TSN0" can be configured for 1.8V or 2.5V operation.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/c046e0be7d26302061d7aa629180a451734ddf8f.1678271030.git.geert+renesas@glider.be
|
|
Add support for configuring the I/O voltage level of the Ethernet AVB
pins on the R-Car D3 SoC. "PIN_VDDQ_AVB0" can be configured for 2.5V or
3.3V operation.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/8f9164487715d8a4898ca651038c0b4d5013764c.1678271030.git.geert+renesas@glider.be
|
|
Add support for configuring the I/O voltage level of the Ethernet AVB
pins on the R-Car E3 SoC. "PIN_VDDQ_AVB0" can be configured for 2.5V or
3.3V operation.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/57883cd2d94c7919dc0f0db07cf6169ca89538e6.1678271030.git.geert+renesas@glider.be
|
|
Add support for configuring the I/O voltage levels of the Ethernet AVB
and Gigabit Ethernet pins on the R-Car V3H SoC. "PIN_VDDQ_AVB" and
"PIN_VDDQ_GE" can be configured for 2.5V or 3.3V operation.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/3c26c4f3735a6d071685c507c065172e63af5d70.1678271030.git.geert+renesas@glider.be
|
|
Add support for configuring the I/O voltage level of the Ethernet AVB
pins on the R-Car V3M SoC. "PIN_VDDQ_AVB0" can be configured for 2.5V
or 3.3V operation.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/eb4db82bdeb67507a1a77f63b9d90280d6f38ba4.1678271030.git.geert+renesas@glider.be
|
|
Currently, the Renesas pin control driver supports pins that can switch
their I/O voltage levels between either 1.8V and 3.3V, or between 2.5V
and 3.3V. However, some SoCs have pins that can switch between 1.8V and
2.5V.
Add support for this by replacing the separate SH_PFC_PIN_CFG_IO_VOLTAGE
capability and voltage level flags by a 2-bit field, to cover three
possible I/O voltage switching options.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/0c04925457bf3f7e78e7e3851528d9a4c29246da.1678271030.git.geert+renesas@glider.be
|
|
Commit 537db25ca330dce0 ("pinctrl: renesas: Add I/O voltage level
flag") introduced new flags to support pins that can switch their
voltage levels between either 1.8V and 3.3V, or between 2.5V and 3.3V.
The old SH_PFC_PIN_CFG_IO_VOLTAGE flag was retained to avoid having to
change existing drivers.
Replace SH_PFC_PIN_CFG_IO_VOLTAGE by SH_PFC_PIN_CFG_IO_VOLTAGE_18_33, to
make the voltage configuration explicit, and to prepare for the advent
of support for more voltage levels.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/ae5f879c093f3e3cd50ba1495975bccfad81237b.1678271030.git.geert+renesas@glider.be
|
|
The POC Control Register 0 (POCCTRL0) on R-Car D3 is not registered in
the pinmux_ioctrl_regs[] array. Hence it is not saved/restored during
suspend/resume, and its contents may be lost after s2ram.
This went unnoticed when improving suspend/resume support in commit
d92ee9cf8ec8d7fe ("pinctrl: sh-pfc: rcar-gen3: Retain TDSELCTRL register
across suspend/resume").
Fix this by moving the pinmux_ioctrl_regs[] array up, and adding the
POCCTRL0 register.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/d17402b83b1f3fa0f572527c0382027bccb86205.1678271030.git.geert+renesas@glider.be
|
|
To speed up some usecases implement reading and writing several IO lines
at once.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230324164957.485924-3-u.kleine-koenig@pengutronix.de
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The semantic of mcp_set_mask() was surprising to me when I first read
that driver. So it was unexpected that in the call
mcp_set_mask(mcp, MCP_OLAT, mask, value);
value was a bool. Make the function a thinner wrapper around
regmap_update_bits() and rename it to also have a similar name.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230324164957.485924-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
|
|
The Qualcomm pinctrl driver has been violating the documented meaning
of PIN_CONFIG_INPUT_ENABLE. That documentation says:
Note that this does not affect the pin's ability to drive output.
...yet the Qualcomm driver's sole action when asked to "enable input"
on a pin is to disable its output.
The Qualcomm driver's implementation stems from the fact that
"output-disable" is a "new" property from 2017. It was introduced in
commit 425562429d4f ("pinctrl: generic: Add output-enable
property"). The "input-enable" handling in Qualcomm drivers is from
2015 introduced in commit 407f5e392f9c ("pinctrl: qcom: handle
input-enable pinconf property").
Let's change the Qualcomm driver to move us in the right direction. As
part of this:
1. We'll now support PIN_CONFIG_OUTPUT_ENABLE
2. We'll still support using PIN_CONFIG_INPUT_ENABLE to disable a
pin's output (in violation of the docs) with a big comment in the
code. This is needed because old device trees have "input-enable"
in them and, in some cases, people might need the old
behavior. While we could programmatically change all old device
trees, it doesn't really hurt to keep supporting the old behavior
and we're _supposed_ to try to be compatible with old device trees
anyway.
It can also be noted that the PIN_CONFIG_INPUT_ENABLE handling code
seems to have purposefully ignored its argument. That means that old
boards that had _either_ "input-disable" or "input-enable" in them
would have had the effect of disabling a pin's output. While we could
change this behavior, since we're only leaving the
PIN_CONFIG_INPUT_ENABLE there for backward compatibility we might as
well be fully backward compatible.
NOTE: despite the fact that we'll still support
PIN_CONFIG_INPUT_ENABLE for _setting_ config, we take it away from
msm_config_group_get(). This appears to be only used for populating
debugfs and fixing debugfs to "output enabled" where relevant instead
of "input enabled" makes more sense and has more truthiness.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230323102605.8.Id740ae6a993f9313b58add6b10f6a92795d510d4@changeid
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
This fixes a similar problem to the one observed in:
commit 4e5a04be88fe ("pinctrl: amd: disable and mask interrupts on probe").
On some systems, during suspend/resume cycle firmware leaves
an interrupt enabled on a pin that is not used by the kernel.
This confuses the AMD pinctrl driver and causes spurious interrupts.
The driver already has logic to detect if a pin is used by the kernel.
Leverage it to re-initialize interrupt fields of a pin only if it's not
used by us.
Cc: stable@vger.kernel.org
Fixes: dbad75dd1f25 ("pinctrl: add AMD GPIO driver support.")
Signed-off-by: Kornel Dulęba <korneld@chromium.org>
Link: https://lore.kernel.org/r/20230320093259.845178-1-korneld@chromium.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Replace struct s32_pmx_func with generic struct pinfunction since they
have the same data fields.
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Chester Lin <clin@suse.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20230327062754.3326-5-clin@suse.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Use generic data structure to describe pin control groups in S32 SoC family
and drop duplicated struct members.
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Chester Lin <clin@suse.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20230327062754.3326-4-clin@suse.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Move common codes into smaller inline functions and remove argument checks
that are not actually used by pull up/down bits in the S32 MSCR register.
Signed-off-by: Chester Lin <clin@suse.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20230327062754.3326-3-clin@suse.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Improve error/return code handlings and config checks in order to have
better reliability and simplify driver codes such as removing/changing
improper macros, blanks, print formats and helper calls.
Signed-off-by: Chester Lin <clin@suse.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20230327062754.3326-2-clin@suse.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel
pinctrl: renesas: Updates for v6.4
- Add pin groups for audio on R-Car V4H,
- Drop support for the obsolete R-Car H3 ES1.* (R8A77950) SoC,
- Miscellaneous fixes and improvements.
|
|
It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties. As
part of this, convert of_get_property/of_find_property calls to the
recently added of_property_present() helper when we just want to test
for presence of a property and nothing more.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230310144721.1544669-1-robh@kernel.org
[Dropped hunk hitting drivers/pinctrl/renesas/pinctrl.c]
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
NVIDIA BlueField-3 SoC has a few pins that can be used as GPIOs
or take the default hardware functionality. Add a driver for
the pin muxing.
Signed-off-by: Asmaa Mnebhi <asmaa@nvidia.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20230315215027.30685-3-asmaa@nvidia.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Add pinctrl definitions for the TLMM of IPQ9574
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Co-developed-by: Anusha Rao <quic_anusha@quicinc.com>
Signed-off-by: Anusha Rao <quic_anusha@quicinc.com>
Signed-off-by: Devi Priya <quic_devipriy@quicinc.com>
Link: https://lore.kernel.org/r/20230316072940.29137-5-quic_devipriy@quicinc.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Add pinctrl driver for TLMM block found in SM7150 SoC.
Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
Link: https://lore.kernel.org/r/20230311212114.108870-3-danila@jiaxyga.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The OF_GPIO option is enabled by default when GPIOLIB is enabled, and
cannot be disabled. Remove it as a reverse dependency where GPIOLIB is also
set as a reverse dependency.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20230317213011.13656-6-arinc.unal@arinc9.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
This platform from Ralink was acquired by MediaTek in 2011. Then, MediaTek
introduced new SoCs which utilise this platform. Move the driver to
mediatek pinctrl directory. Rename the ralink core driver to mtmips.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Link: https://lore.kernel.org/r/20230317213011.13656-5-arinc.unal@arinc9.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Split the driver out to pinctrl-mt76x8.c. Remove including the unnecessary
headers since is_mt76x8() is not being used anymore.
Introduce a new compatible string to be able to document the pin muxing
information properly.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20230317213011.13656-4-arinc.unal@arinc9.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Add new compatible strings to make every SoC, or SoCs that use the same
pinmux data have a unique compatible string. This ensures that the pin
muxing information of every SoC, or a set of SoCs that use the same pinmux
data can be properly documented.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20230317213011.13656-3-arinc.unal@arinc9.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
There have been stable releases with the ralink,rt2880-pinmux compatible
string included. Having it removed breaks the ABI. Reintroduce it.
Fixes: e5981cd46183 ("pinctrl: ralink: add new compatible strings for each pinctrl subdriver")
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20230317213011.13656-2-arinc.unal@arinc9.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The last user of the Renesas-specific properties was converted to the
standard properties in commit af897250ea54c6f2 ("ARM: dts: gose: use
generic pinctrl properties in SDHI nodes") in v4.10.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/ff9c14781110bbf19b56b45dd1f01e6da90319ad.1678704441.git.geert+renesas@glider.be
|
|
All LPASS pins have basic GPIO function and most of the code is ready
for that. Add missing glue pieces to allow LPASS pins to work as GPIO,
which is going to be used on MTP8550 and QRD8550 boards.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230309154949.658380-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
When choosing GPIO function for pins, use the same glitch-free method as
main TLMM pinctrl-msm.c driver in msm_pinmux_set_mux(). This replicates
the commit d21f4b7ffc22 ("pinctrl: qcom: Avoid glitching lines when we
first mux to output") to LPASS pin controller with same justification.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230309154949.658380-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The set_mux callback in SoC TLMM driver (pinctrl-msm.c) uses "group",
not "group_num" for the number of the pin group. Other places of
lpass-lpi also use "group", so let's be consistent for code readability.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230309154949.658380-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
