summaryrefslogtreecommitdiff
path: root/drivers/pinctrl
AgeCommit message (Collapse)Author
2021-01-06pinctrl: mediatek: Fix fallback call pathHsin-Yi Wang
Some SoCs, eg. mt8183, are using a pinconfig operation bias_set_combo. The fallback path in mtk_pinconf_adv_pull_set() should also try this operation. Fixes: cafe19db7751 ("pinctrl: mediatek: Backward compatible to previous Mediatek's bias-pull usage") Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> Acked-by: Sean Wang <sean.wang@kernel.org> Link: https://lore.kernel.org/r/20201228090425.2130569-1-hsinyi@chromium.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-01-06pinctrl: nomadik: Remove unused variable in nmk_gpio_dbg_show_oneNathan Chancellor
Clang warns: drivers/pinctrl/nomadik/pinctrl-nomadik.c:952:8: warning: unused variable 'wake' [-Wunused-variable] bool wake; ^ 1 warning generated. There were two wake declarations added to nmk_gpio_dbg_show_one when converting it to use irq_has_action but only one is used within its scope. Remove the unused one so there is no more warning. Fixes: f3925032d7fd ("pinctrl: nomadik: Use irq_has_action()") Reported-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Andrew Halaney <ajhalaney@gmail.com> Reviewed-by: Andrew Halaney <ajhalaney@gmail.com> Reported-by: Hulk Robot <hulkci@huawei.com> Reported-by: Ye Bin <yebin10@huawei.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Link: https://lore.kernel.org/r/20201229204710.1129033-1-natechancellor@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-01-05pinctrl: remove empty lines in pinctrl subsystemZhaoyu Liu
Remove all empty lines at the end of functions in pinctrl subsystem, and make the code neat. Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Zhaoyu Liu <zackaryliu@yeah.net> Link: https://lore.kernel.org/r/X98NP6NFK1Afzrgd@manjaro Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-01-04pinctrl: aspeed: g6: Fix PWMG0 pinctrl settingBilly Tsai
The SCU offset for signal PWM8 in group PWM8G0 is wrong, fix it from SCU414 to SCU4B4. Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com> Fixes: 2eda1cdec49f ("pinctrl: aspeed: Add AST2600 pinmux support") Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20201217024912.3198-1-billy_tsai@aspeedtech.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-01-04pinctrl: ralink: rt2880: fix '-Wmissing-prototypes' in init functionSergio Paracuellos
Kernel test robot reported the following warning: 'warning: no previous prototype for 'rt2880_pinmux_init''. This function is the entry point for the platform driver and it is private to this driver. Hence declare it 'static' which is the correct thing to do fixing also this warning. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Link: https://lore.kernel.org/r/20201228064727.30098-1-sergio.paracuellos@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-01-04pinctrl: ralink: rt2880: use 'PTR_ERR_OR_ZERO'Sergio Paracuellos
Avoid some boilerplate code using 'PTR_ERR_OR_ZERO' in probe function. Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20201213161721.6514-8-sergio.paracuellos@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-01-04pinctrl: ralink: rt2880: preserve error codesSergio Paracuellos
Some paths in probe function are returning '-EINVAL' instead of preserve original code from called functions. Change them to preserve all of them. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20201213161721.6514-7-sergio.paracuellos@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-01-04pinctrl: ralink: rt2880: delete not needed error messageSergio Paracuellos
When '-ENOMEM' is returned there is not need at all to add custom error messages. Hence delete it. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20201213161721.6514-6-sergio.paracuellos@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-01-04pinctrl: ralink: rt2880: add missing NULL checkSergio Paracuellos
Memory is being requested to the kernel but there is a missing check for NULL. Hence, add it. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20201213161721.6514-5-sergio.paracuellos@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-01-04pinctrl: ralink: rt2880: return proper error codeSergio Paracuellos
Check for NULL shall return '-ENOMEM' instead of '-1'. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20201213161721.6514-4-sergio.paracuellos@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-01-04pinctrl: ralink: rt2880: avoid double pointer to simplify codeSergio Paracuellos
Double pointer is being used and assigned in a bit dirty way to assign functions in pinctrl. Instead of doing this just avoid it and use directly 'p->func' instead. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20201213161721.6514-3-sergio.paracuellos@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-01-04pinctrl: ingenic: Rename registers from JZ4760_GPIO_* to JZ4770_GPIO_*Paul Cercueil
Now that JZ4760 support has been fixed, it looks wrong to have JZ4760_GPIO_* registers being written if the SoC is a JZ4770 or later. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20201211232810.261565-2-paul@crapouillou.net Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-01-04pinctrl: ingenic: Fix JZ4760 supportPaul Cercueil
- JZ4760 and JZ4760B have a similar register layout as the JZ4740, and don't use the new register layout, which was introduced with the JZ4770 SoC and not the JZ4760 or JZ4760B SoCs. - The JZ4740 code path only expected two function modes to be configurable for each pin, and wouldn't work with more than two. Fix it for the JZ4760, which has four configurable function modes. Fixes: 0257595a5cf4 ("pinctrl: Ingenic: Add pinctrl driver for JZ4760 and JZ4760B.") Cc: <stable@vger.kernel.org> # 5.3 Signed-off-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20201211232810.261565-1-paul@crapouillou.net Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-01-04pinctrl: ti-iodelay: convert comma to semicolonZheng Yongjun
Replace a comma between expression statements by a semicolon. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Link: https://lore.kernel.org/r/20201211084902.2480-1-zhengyongjun3@huawei.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-01-04pinctrl: mediatek: moore: convert comma to semicolonZheng Yongjun
Replace a comma between expression statements by a semicolon. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Link: https://lore.kernel.org/r/20201211084801.2425-1-zhengyongjun3@huawei.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-01-04pinctrl: mediatek: paris: convert comma to semicolonZheng Yongjun
Replace a comma between expression statements by a semicolon. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Link: https://lore.kernel.org/r/20201211084717.2371-1-zhengyongjun3@huawei.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-01-04pinctrl: at91: convert comma to semicolonZheng Yongjun
Replace a comma between expression statements by a semicolon. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Link: https://lore.kernel.org/r/20201211084541.2318-1-zhengyongjun3@huawei.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-12-24Merge tag 'irq-core-2020-12-23' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "This is the second attempt after the first one failed miserably and got zapped to unblock the rest of the interrupt related patches. A treewide cleanup of interrupt descriptor (ab)use with all sorts of racy accesses, inefficient and disfunctional code. The goal is to remove the export of irq_to_desc() to prevent these things from creeping up again" * tag 'irq-core-2020-12-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits) genirq: Restrict export of irq_to_desc() xen/events: Implement irq distribution xen/events: Reduce irq_info:: Spurious_cnt storage size xen/events: Only force affinity mask for percpu interrupts xen/events: Use immediate affinity setting xen/events: Remove disfunct affinity spreading xen/events: Remove unused bind_evtchn_to_irq_lateeoi() net/mlx5: Use effective interrupt affinity net/mlx5: Replace irq_to_desc() abuse net/mlx4: Use effective interrupt affinity net/mlx4: Replace irq_to_desc() abuse PCI: mobiveil: Use irq_data_get_irq_chip_data() PCI: xilinx-nwl: Use irq_data_get_irq_chip_data() NTB/msi: Use irq_has_action() mfd: ab8500-debugfs: Remove the racy fiddling with irq_desc pinctrl: nomadik: Use irq_has_action() drm/i915/pmu: Replace open coded kstat_irqs() copy drm/i915/lpe_audio: Remove pointless irq_to_desc() usage s390/irq: Use irq_desc_kstat_cpu() in show_msi_interrupt() parisc/irq: Use irq_desc_kstat_cpu() in show_interrupts() ...
2020-12-16Merge tag 'pinctrl-v5.11-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for the v5.11 kernel. Drivers, drivers and drivers. Not a single core change. Some new stuff, especially a bunch of new Intel, Qualcomm and Ocelot SoCs. As part of the modularization attempt, I applied one patch affecting the firmware subsystem as a functional (not syntactic/semantic) dependency and then it blew up in our face, so I had to revert it, bummer. It will come in later, through that subsystem, I guess. New drivers: - New driver for the Microchip Serial GPIO "SGPIO". - Qualcomm SM8250 LPASS (Low Power Audio Subsystem) GPIO driver. New subdrivers: - Intel Lakefield subdriver. - Intel Elkhart Lake subdriver. - Intel Alder Lake-S subdriver. - Qualcomm MSM8953 subdriver. - Qualcomm SDX55 subdriver. - Qualcomm SDX55 PMIC subdriver. - Ocelot Luton SoC subdriver. - Ocelot Serval SoC subdriver. Modularization: - The Meson driver can now be built as modules. - The Qualcomm driver(s) can now be built as modules. Incremental improvements: - The Intel driver now supports pin configuration for GPIO-related configurations. - A bunch of Renesas PFC drivers have been augmented with support for QSPI pins, groups and functions. - Non-critical fixes to the irq handling in the Allwinner Sunxi driver" * tag 'pinctrl-v5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (80 commits) pinctrl/spear: simplify the return expression of spear300_pinctrl_probe() pinctrl: mediatek: simplify the return expression of mtk_pinconf_bias_disable_set_rev1() dt-bindings: pinctrl: pinctrl-microchip-sgpio: Add irq support pinctrl: pinctrl-microchip-sgpio: Add irq support (for sparx5) pinctrl: qcom: Add sm8250 lpass lpi pinctrl driver dt-bindings: pinctrl: qcom: Add sm8250 lpass lpi pinctrl bindings pinctrl: qcom-pmic-gpio: Add support for pmx55 dt-bindings: pinctrl: qcom-pmic-gpio: Add pmx55 support pinctrl: pinctrl-microchip-sgpio: Mark some symbols with static keyword pinctrl: at91-pio4: Make PINCTRL_AT91PIO4 depend on HAS_IOMEM to fix build error pinctrl: mtk: Fix low level output voltage issue pinctrl: falcon: add missing put_device() call in pinctrl_falcon_probe() pinctrl: actions: pinctrl-s500: Constify s500_padinfo[] pinctrl: pinctrl-microchip-sgpio: Add OF config dependency pinctrl: pinctrl-microchip-sgpio: Add pinctrl driver for Microsemi Serial GPIO dt-bindings: pinctrl: Add bindings for pinctrl-microchip-sgpio driver pinctrl: at91-pio4: add support for fewer lines on last PIO bank pinctrl: sunxi: Always call chained_irq_{enter, exit} in sunxi_pinctrl_irq_handler pinctrl: sunxi: Mark the irq bank not found in sunxi_pinctrl_irq_handler() with WARN_ON pinctrl: sunxi: fix irq bank map for the Allwinner A100 pin controller ...
2020-12-15Merge tag 'staging-5.11-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging / IIO driver updates from Greg KH: "Here is the big staging and IIO driver pull request for 5.11-rc1 Lots of different things in here: - loads of driver updates - so many coding style cleanups - new IIO drivers - Android ION code is finally removed from the tree - wimax drivers are moved to staging on their way out of the kernel Nothing really exciting, just the constant grind of kernel development :) All have been in linux-next for a while with no reported issues" * tag 'staging-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (341 commits) staging: olpc_dcon: Do not call platform_device_unregister() in dcon_probe() staging: most: Fix spelling mistake "tranceiver" -> "transceiver" staging: qlge: remove duplicate word in comment staging: comedi: mf6x4: Fix AI end-of-conversion detection staging: greybus: Add TODO item about modernizing the pwm code pinctrl: ralink: add a pinctrl driver for the rt2880 family dt-bindings: pinctrl: rt2880: add binding document staging: rtl8723bs: remove ELEMENT_ID enum staging: rtl8723bs: remove unused macros staging: rtl8723bs: replace EID_EXTCapability staging: rtl8723bs: replace EID_BSSIntolerantChlReport staging: rtl8723bs: replace EID_BSSCoexistence staging: rtl8723bs: replace _MME_IE_ staging: rtl8723bs: replace _WAPI_IE_ staging: rtl8723bs: replace _EXT_SUPPORTEDRATES_IE_ staging: rtl8723bs: replace _ERPINFO_IE_ staging: rtl8723bs: replace _CHLGETXT_IE_ staging: rtl8723bs: replace _COUNTRY_IE_ staging: rtl8723bs: replace _IBSS_PARA_IE_ staging: rtl8723bs: replace _TIM_IE_ ...
2020-12-15pinctrl: use krealloc_array()Bartosz Golaszewski
Use the helper that checks for overflows internally instead of manually calculating the size of the new array. Link: https://lkml.kernel.org/r/20201109110654.12547-6-brgl@bgdev.pl Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Borislav Petkov <bp@suse.de> Cc: Christian Knig <christian.koenig@amd.com> Cc: Christoph Lameter <cl@linux.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Airlie <airlied@linux.ie> Cc: David Rientjes <rientjes@google.com> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: James Morse <james.morse@arm.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Jason Wang <jasowang@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Maxime Ripard <mripard@kernel.org> Cc: "Michael S . Tsirkin" <mst@redhat.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Robert Richter <rric@kernel.org> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Takashi Iwai <tiwai@suse.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15pinctrl: nomadik: Use irq_has_action()Thomas Gleixner
Let the core code do the fiddling with irq_desc. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20201210194044.065003856@linutronix.de
2020-12-12pinctrl/spear: simplify the return expression of spear300_pinctrl_probe()Zheng Yongjun
Simplify the return expression. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Link: https://lore.kernel.org/r/20201210135746.1492-1-zhengyongjun3@huawei.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-12-12pinctrl: mediatek: simplify the return expression of ↵Zheng Yongjun
mtk_pinconf_bias_disable_set_rev1() Simplify the return expression. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Link: https://lore.kernel.org/r/20201210135902.1548-1-zhengyongjun3@huawei.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-12-11pinctrl: pinctrl-microchip-sgpio: Add irq support (for sparx5)Lars Povlsen
This adds 'interrupt-controller' features for the signals available on the Microchip SGPIO controller, however only for controller versions on the Sparx5 platform (or later). Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com> Link: https://lore.kernel.org/r/20201209142753.683208-2-lars.povlsen@microchip.com [Select GPIOLIB_IRQCHIP in Kconfig] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-12-09pinctrl: intel: Actually disable Tx and Rx buffers on GPIO requestAndy Shevchenko
Mistakenly the buffers (input and output) become enabled together for a short period of time during GPIO request. This is problematic, because instead of initial motive to disable them in the commit af7e3eeb84e2 ("pinctrl: intel: Disable input and output buffer when switching to GPIO"), the driven value on the pin, which might be used as an IRQ line, brings firmwares of some touch pads to an awkward state that needs a full power off to recover. Fix this, as stated in the culprit commit, by disabling the buffers. Fixes: af7e3eeb84e2 ("pinctrl: intel: Disable input and output buffer when switching to GPIO") BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=210497 Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Link: https://lore.kernel.org/r/20201208182403.40435-1-andriy.shevchenko@linux.intel.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-12-08pinctrl: ralink: add a pinctrl driver for the rt2880 familySergio Paracuellos
These Socs have 1-3 banks of 8-32 gpios. Rather then setting the muxing of each pin individually, these socs have mux groups that when set will effect 1-N pins. Pin groups have a 2, 4 or 8 different muxes. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Link: https://lore.kernel.org/r/20201208075523.7060-3-sergio.paracuellos@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-08pinctrl: aspeed: Fix GPIO requests on pass-through banksAndrew Jeffery
Commit 6726fbff19bf ("pinctrl: aspeed: Fix GPI only function problem.") fixes access to GPIO banks T and U on the AST2600. Both banks contain input-only pins and the GPIO pin function is named GPITx and GPIUx respectively. Unfortunately the fix had a negative impact on GPIO banks D and E for the AST2400 and AST2500 where the GPIO pass-through functions take similar "GPI"-style names. The net effect on the older SoCs was that when the GPIO subsystem requested a pin in banks D or E be muxed for GPIO, they were instead muxed for pass-through mode. Mistakenly muxing pass-through mode e.g. breaks booting the host on IBM's Witherspoon (AC922) platform where GPIOE0 is used for FSI. Further exploit the names in the provided expression structure to differentiate pass-through from pin-specific GPIO modes. This follow-up fix gives the expected behaviour for the following tests: Witherspoon BMC (AST2500): 1. Power-on the Witherspoon host 2. Request GPIOD1 be muxed via /sys/class/gpio/export 3. Request GPIOE1 be muxed via /sys/class/gpio/export 4. Request the balls for GPIOs E2 and E3 be muxed as GPIO pass-through ("GPIE2" mode) via a pinctrl hog in the devicetree Rainier BMC (AST2600): 5. Request GPIT0 be muxed via /sys/class/gpio/export 6. Request GPIU0 be muxed via /sys/class/gpio/export Together the tests demonstrate that all three pieces of functionality (general GPIOs via 1, 2 and 3, input-only GPIOs via 5 and 6, pass-through mode via 4) operate as desired across old and new SoCs. Fixes: 9b92f5c51e9a ("pinctrl: aspeed: Fix GPI only function problem.") Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Tested-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Cc: Billy Tsai <billy_tsai@aspeedtech.com> Cc: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20201126063337.489927-1-andrew@aj.id.au Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-12-05pinctrl: qcom: Add sm8250 lpass lpi pinctrl driverSrinivas Kandagatla
Add initial pinctrl driver to support pin configuration for LPASS (Low Power Audio SubSystem) LPI (Low Power Island) pinctrl on SM8250. This IP is an additional pin control block for Audio Pins on top the existing SoC Top level pin-controller. Hardware setup looks like: TLMM GPIO[146 - 159] --> LPASS LPI GPIO [0 - 13] This pin controller has some similarities compared to Top level msm SoC Pin controller like 'each pin belongs to a single group' and so on. However this one is intended to control only audio pins in particular, which can not be configured/touched by the Top level SoC pin controller except setting them as gpios. Apart from this, slew rate is also available in this block for certain pins which are connected to SLIMbus or SoundWire Bus. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20201202163443.26499-3-srinivas.kandagatla@linaro.org [Add some dependencies] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-12-04pinctrl: qcom-pmic-gpio: Add support for pmx55Vinod Koul
PM55 pmic support gpio controller so add compatible and comment for gpio holes Signed-off-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20201126092151.1082697-2-vkoul@kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-12-04pinctrl: amd: remove debounce filter setting in IRQ type settingCoiby Xu
Debounce filter setting should be independent from IRQ type setting because according to the ACPI specs, there are separate arguments for specifying debounce timeout and IRQ type in GpioIo() and GpioInt(). Together with commit 06abe8291bc31839950f7d0362d9979edc88a666 ("pinctrl: amd: fix incorrect way to disable debounce filter") and Andy's patch "gpiolib: acpi: Take into account debounce settings" [1], this will fix broken touchpads for laptops whose BIOS set the debounce timeout to a relatively large value. For example, the BIOS of Lenovo AMD gaming laptops including Legion-5 15ARH05 (R7000), Legion-5P (R7000P) and IdeaPad Gaming 3 15ARH05, set the debounce timeout to 124.8ms. This led to the kernel receiving only ~7 HID reports per second from the Synaptics touchpad (MSFT0001:00 06CB:7F28). Existing touchpads like [2][3] are not troubled by this bug because the debounce timeout has been set to 0 by the BIOS before enabling the debounce filter in setting IRQ type. [1] https://lore.kernel.org/linux-gpio/20201111222008.39993-11-andriy.shevchenko@linux.intel.com/ 8dcb7a15a585 ("gpiolib: acpi: Take into account debounce settings") [2] https://github.com/Syniurge/i2c-amd-mp2/issues/11#issuecomment-721331582 [3] https://forum.manjaro.org/t/random-short-touchpad-freezes/30832/28 Signed-off-by: Coiby Xu <coiby.xu@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/linux-gpio/CAHp75VcwiGREBUJ0A06EEw-SyabqYsp%2Bdqs2DpSrhaY-2GVdAA%40mail.gmail.com/ BugLink: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1887190 Link: https://lore.kernel.org/r/20201125130320.311059-1-coiby.xu@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-12-04pinctrl: pinctrl-microchip-sgpio: Mark some symbols with static keywordZou Wei
Fix the following sparse warnings: drivers/pinctrl/pinctrl-microchip-sgpio.c:63:31: warning: symbol 'properties_luton' was not declared. Should it be static? drivers/pinctrl/pinctrl-microchip-sgpio.c:68:31: warning: symbol 'properties_ocelot' was not declared. Should it be static? drivers/pinctrl/pinctrl-microchip-sgpio.c:73:31: warning: symbol 'properties_sparx5' was not declared. Should it be static? Signed-off-by: Zou Wei <zou_wei@huawei.com> Link: https://lore.kernel.org/r/1606218173-3722-1-git-send-email-zou_wei@huawei.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-12-04pinctrl: at91-pio4: Make PINCTRL_AT91PIO4 depend on HAS_IOMEM to fix build errorTiezhu Yang
If CONFIG_HAS_IOMEM is not set, devm_platform_ioremap_resource() will be not built in drivers/base/platform.c and then there exists a build error about undefined reference to "devm_platform_ioremap_resource" in pinctrl-at91-pio4.c under COMPILE_TEST and CONFIG_PINCTRL_AT91PIO4, make PINCTRL_AT91PIO4 depend on HAS_IOMEM to fix it. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Link: https://lore.kernel.org/r/1606209423-4742-1-git-send-email-yangtiezhu@loongson.cn Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-12-04pinctrl: mtk: Fix low level output voltage issueZhiyong Tao
This patch is used to fix low level output voltage issue. A pin is changed from input pull-up to output high. The Dout value of the pin is default as 0. If we change the direction of the pin before the dout value of the pin, It maybe produce a low level output voltage between "input pull-up" and "output high". Signed-off-by: Zhiyong Tao <zhiyong.tao@mediatek.com> Link: https://lore.kernel.org/r/20201120093058.7248-2-zhiyong.tao@mediatek.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-12-04pinctrl: falcon: add missing put_device() call in pinctrl_falcon_probe()Yu Kuai
if of_find_device_by_node() succeed, pinctrl_falcon_probe() doesn't have a corresponding put_device(). Thus add put_device() to fix the exception handling for this function implementation. Fixes: e316cb2b16bb ("OF: pinctrl: MIPS: lantiq: adds support for FALCON SoC") Signed-off-by: Yu Kuai <yukuai3@huawei.com> Link: https://lore.kernel.org/r/20201119011219.2248232-1-yukuai3@huawei.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-12-04pinctrl: actions: pinctrl-s500: Constify s500_padinfo[]Cristian Ciocaltea
s500_padinfo[] is never modified and should be made 'const' to allow the compiler to optimize code generation, i.e. put it in the text section instead of the data section. Before: text data bss dec hex filename 12503 5088 0 17591 44b7 drivers/pinctrl/actions/pinctrl-s500.o After: text data bss dec hex filename 14435 3156 0 17591 44b7 drivers/pinctrl/actions/pinctrl-s500.o Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com> Link: https://lore.kernel.org/r/24505deb08d050eb4ce38f186f4037d7541ea217.1605722628.git.cristian.ciocaltea@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-12-02pinctrl: pinctrl-microchip-sgpio: Add OF config dependencyLars Povlsen
The pinctrl-microchip-sgpio driver needs OF support, so add that to Kconfig. Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20201125122014.11237-1-lars.povlsen@microchip.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-12-02pinctrl: pinctrl-microchip-sgpio: Add pinctrl driver for Microsemi Serial GPIOLars Povlsen
This adds a pinctrl driver for the Microsemi/Microchip Serial GPIO (SGPIO) device used in various SoC's. The driver is added as a pinctrl driver, albeit only having just GPIO support currently. The hardware supports other functions that will be added following. Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com> Link: https://lore.kernel.org/r/20201113145151.68900-3-lars.povlsen@microchip.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-12-01Merge tag 'samsung-pinctrl-5.11' of ↵Linus Walleij
https://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/samsung into devel Samsung pinctrl drivers changes for v5.11 Only a cleanup of unneeded breaks.
2020-12-01Merge tag 'renesas-pinctrl-for-v5.11-tag2' of ↵Linus Walleij
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel pinctrl: renesas: Updates for v5.11 (take two) - Add QSPI pin groups on R-Car E3, H3, M3-W/W+, and M3-N, - A small fix for a Clang warning.
2020-11-24pinctrl: at91-pio4: add support for fewer lines on last PIO bankEugen Hristev
Some products, like sama7g5, do not have a full last bank of PIO lines. In this case for example, sama7g5 only has 8 lines for the PE bank. PA0-31, PB0-31, PC0-31, PD0-31, PE0-7, in total 136 lines. To cope with this situation, added a data attribute that is product dependent, to specify the number of lines of the last bank. In case this number is different from the macro ATMEL_PIO_NPINS_PER_BANK, adjust the total number of lines accordingly. This will avoid advertising 160 lines instead of the actual 136, as this product supports, and to avoid reading/writing to invalid register addresses. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com> Link: https://lore.kernel.org/r/20201113132429.420940-1-eugen.hristev@microchip.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-11-24Merge tag 'intel-pinctrl-v5.11-1' of ↵Linus Walleij
gitolite.kernel.org:pub/scm/linux/kernel/git/pinctrl/intel into devel intel-pinctrl for v5.11-1 * Add Intel Alder Lake-S pin controller support * Add Intel Elkhart Lake pin controller support * Add Intel Lakefield driver pin controller support * Miscellaneous fixes for Intel Lynxpoint driver The following is an automated git shortlog grouped by driver: intel: - Add Intel Alder Lake-S pin controller support - Add Intel Elkhart Lake pin controller support - Add blank line before endif in Kconfig - Add Intel Lakefield pin controller support lynxpoint: - Enable pin configuration setting for GPIO chip - Use defined constant for disabled bias explicitly - Unify initcall location in the code
2020-11-24pinctrl: sunxi: Always call chained_irq_{enter, exit} in ↵Yangtao Li
sunxi_pinctrl_irq_handler It is found on many allwinner soc that there is a low probability that the interrupt status cannot be read in sunxi_pinctrl_irq_handler. This will cause the interrupt status of a gpio bank to always be active on gic, preventing gic from responding to other spi interrupts correctly. So we should call the chained_irq_* each time enter sunxi_pinctrl_irq_handler(). Signed-off-by: Yangtao Li <frank@allwinnertech.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/85263ce8b058e80cea25c6ad6383eb256ce96cc8.1604988979.git.frank@allwinnertech.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-11-24pinctrl: sunxi: Mark the irq bank not found in sunxi_pinctrl_irq_handler() ↵Yangtao Li
with WARN_ON The interrupt descriptor cannot be found in the interrupt processing function, and this situation cannot happen when the system is running normally. It doesn't seem right to return directly to the status of not handling gic. In this case, it must be a bug, let's mark it with WARN_ON. Signed-off-by: Yangtao Li <frank@allwinnertech.com> Link: https://lore.kernel.org/r/470ebae22fc5434ad5409c4f6e29255467b3cef6.1604988979.git.frank@allwinnertech.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-11-24pinctrl: sunxi: fix irq bank map for the Allwinner A100 pin controllerYangtao Li
A100's pin starts with PB, so it should start with 1. Fixes: 473436e7647d6 ("pinctrl: sunxi: add support for the Allwinner A100 pin controller") Signed-off-by: Yangtao Li <frank@allwinnertech.com> Link: https://lore.kernel.org/r/9db51667bf9065be55beafd56e5c319e3bbe8310.1604988979.git.frank@allwinnertech.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-11-24pinctrl: qcom: Add sc7280 pinctrl driverRajendra Nayak
Add initial pinctrl driver to support pin configuration with pinctrl framework for SC7280 SoC Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/1604570192-15057-2-git-send-email-rnayak@codeaurora.org [Change select PINCTRL_MSM to depends on PINCTRL_MSM] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-11-24pinctrl: qcom: Fix msm8953 Kconfig entry to depend on, not select PINCTRL_MSMJohn Stultz
One fixup following my patch commit be117ca32261 ("pinctrl: qcom: Kconfig: Rework PINCTRL_MSM to be a depenency rather then a selected config") being queued in LinusW's tree, as a new config entry was added for the msm8953 that also needs the change. Applies to LinusW's pinctrl devel tree. Signed-off-by: John Stultz <john.stultz@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Andy Gross <agross@kernel.org> Cc: Prasad Sodagudi <psodagud@codeaurora.org> Cc: Vladimir Lypak <junak.pub@gmail.com> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: linux-arm-msm@vger.kernel.org Cc: linux-gpio@vger.kernel.org Link: https://lore.kernel.org/r/20201110215619.86076-1-john.stultz@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-11-23pinctrl: renesas: Fix fall-through warnings for ClangGustavo A. R. Silva
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning by explicitly adding a break statement instead of letting the code fall through to the next case. Link: https://github.com/KSPP/linux/issues/115 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/da20103af0c22424c5d08a12f7107771bf4c01c5.1605896059.git.gustavoars@kernel.org Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-11-23pinctrl: renesas: r8a77965: Add QSPI[01] pins, groups and functionsLad Prabhakar
Add pins, groups and functions for QSPIO[01]. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20201119130926.25692-5-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-11-23pinctrl: renesas: r8a7796: Add QSPI[01] pins, groups and functionsLad Prabhakar
Add pins, groups and functions for QSPIO[01]. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20201119130926.25692-4-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-04 06:37:35 +0000