summaryrefslogtreecommitdiff
path: root/drivers/phy/qualcomm
AgeCommit message (Collapse)Author
2023-02-02phy: qcom-qmp: qserdes-com: Add v6 register offsetsAbel Vesa
The new SM8550 SoC bumps up the HW version of QMP phy to v6 for USB, UFS and PCIE g3x2. Add the new qserdes com offsets in a dedicated header file. Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230117224148.1914627-3-abel.vesa@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-01-18phy: qcom-qmp-usb: fix the regs layout table for sdx65 uniphy PHYDmitry Baryshkov
The sdx64 uniphy gen3x1 PHY references the qmp_v4_usb3phy_regs_layout while the PHY itself uses v5 regs. While there are only minor differences between v4 and v5 regs and none of them concerns registers mentions in regs_layout, switch the PHY to use qmp_v5_usb3phy_regs_layout, to remove possible confusion. Fixes: 14d98d3bf70e ("phy: qcom-qmp-usb: fix regs layout arrays") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230113212138.421583-2-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-01-18phy: qcom-qmp-pcie: fix the regs layout table for sm8450 gen3x1 PHYDmitry Baryshkov
The sm8450 gen3x1 PHY references the pciephy_v4_regs_layout while the PHY itself uses v5 regs. While there are only minor differences between v4 and v5 regs and none of them concerns registers mentions in regs_layout, switch the PHY to use pciephy_v5_regs_layout to remove possible confusion. Fixes: bbe207a1aba1 ("phy: qcom-qmp-pcie: rename regs layout arrays") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230113212138.421583-1-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-01-18phy: qcom-qmp-combo: rework regs layout arraysDmitry Baryshkov
Use symbolic names for the values inside reg layout arrays. New register names are added following the PCS register layout that is used by the particular PHY. Note: ipq8074 tables appear to use a mixture of v2 and v3 registers. This might need additional fixes. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230113212102.421491-2-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-01-18phy: qcom-qmp-combo: remove QPHY_PCS_LFPS_RXTERM_IRQ_STATUS regDmitry Baryshkov
The QPHY_PCS_LFPS_RXTERM_IRQ_STATUS register is not used, remove it from register layout. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230113212102.421491-1-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-01-18phy: qualcomm: qmp-ufs: rename qmp_ufs_offsets_v5 to qmp_ufs_offsetsDmitry Baryshkov
All currently known QMP UFS PHYs have the same offsets for register sub-regions. Instead of using qmp_ufs_offsets_v5 for older generations of PHYs, rename the offsets struct instance to remove _v5 suffix. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230113195515.407866-1-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-01-17phy: qcom-qmp-ufs: Add HS G4 mode support to SC8280XP SoCManivannan Sadhasivam
UFS PHY in SC8280XP SoC is capable of operating at HS G4 mode and the init sequence is compatible with SM8350. Hence, add the tbls_hs_g4 instance reusing the G4 init sequence of SM8350. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: Andrew Halaney <ahalaney@redhat.com> # Qdrive3/sa8540p-ride Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20230114071009.88102-13-manivannan.sadhasivam@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-01-17phy: qcom-qmp-ufs: Add HS G4 mode support to SM8450 SoCManivannan Sadhasivam
UFS PHY in SM8450 SoC is capable of operating at HS G4 mode and the init sequence is compatible with SM8350. Hence, add the tbls_hs_g4 instance reusing the G4 init sequence of SM8350. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: Andrew Halaney <ahalaney@redhat.com> # Qdrive3/sa8540p-ride Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20230114071009.88102-12-manivannan.sadhasivam@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-01-17phy: qcom-qmp-ufs: Add HS G4 mode support to SM8350 SoCManivannan Sadhasivam
UFS PHY in SM8350 SoC is capable of operating at HS G4 mode. Hence, add the required register settings using the tables_hs_g4 struct instance. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: Andrew Halaney <ahalaney@redhat.com> # Qdrive3/sa8540p-ride Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20230114071009.88102-11-manivannan.sadhasivam@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-01-17phy: qcom-qmp-ufs: Avoid setting HS G3 specific registersManivannan Sadhasivam
SM8350 default init sequence sets some PCS registers to HS G3, thereby disabling HS G4 mode. This has the effect on MPHY capability negotiation between the host and the device during link startup and causes the PA_MAXHSGEAR to G3 irrespective of device max gear. Due to that, the agreed gear speed determined by the UFS core will become G3 only and the platform won't run at G4. So, let's remove setting these registers for SM8350 as like other G4 compatible platforms. One downside of this is that, when the board design uses non-G4 compatible device, then MPHY will continue to run in the default mode (G4) even if UFSHCD runs in G3. But this is the case for other platforms as well. Tested-by: Andrew Halaney <ahalaney@redhat.com> # Qdrive3/sa8540p-ride Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20230114071009.88102-10-manivannan.sadhasivam@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-01-17phy: qcom-qmp-ufs: Add HS G4 mode support to SM8250 SoCManivannan Sadhasivam
UFS PHY in SM8250 SoC is capable of operating at HS G4 mode. Hence, add the required register settings using the tables_hs_g4 struct instance. This also requires a separate qmp_phy_cfg for SM8250 instead of reusing SM8150. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: Andrew Halaney <ahalaney@redhat.com> # Qdrive3/sa8540p-ride Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20230114071009.88102-9-manivannan.sadhasivam@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-01-17phy: qcom-qmp-ufs: Add HS G4 mode support to SM8150 SoCManivannan Sadhasivam
UFS PHY in SM8150 SoC is capable of operating at HS G4 mode. Hence, add the required register settings using the tables_hs_g4 struct instance. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: Andrew Halaney <ahalaney@redhat.com> # Qdrive3/sa8540p-ride Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20230114071009.88102-8-manivannan.sadhasivam@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-01-17phy: qcom-qmp-ufs: Move HS Rate B register setting to tbls_hs_bManivannan Sadhasivam
Since now there is support for configuring the HS Rate B mode properly, let's move the register setting to tbls_hs_b struct for all SoCs. This allows the PHY to be configured in Rate A initially and then in Rate B if requested by the UFS driver. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: Andrew Halaney <ahalaney@redhat.com> # Qdrive3/sa8540p-ride Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20230114071009.88102-7-manivannan.sadhasivam@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-01-17phy: qcom-qmp-ufs: Add support for configuring PHY in HS G4 modeManivannan Sadhasivam
Add separate tables_hs_g4 instance to allow the PHY driver to configure the PHY in HS G4 mode. The individual SoC configs need to supply the Rx, Tx and PCS register setting in tables_hs_g4 and the UFS driver can request the Hs G4 mode by calling phy_set_mode_ext() with submode set to UFS_HS_G4. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: Andrew Halaney <ahalaney@redhat.com> # Qdrive3/sa8540p-ride Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20230114071009.88102-6-manivannan.sadhasivam@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-01-17phy: qcom-qmp-ufs: Add support for configuring PHY in HS Series B modeManivannan Sadhasivam
Add separate tables_hs_b instance to allow the PHY driver to configure the PHY in HS Series B mode. The individual SoC configs need to supply the serdes register setting in tables_hs_b and the UFS driver can request the Series B mode by calling phy_set_mode() with mode set to PHY_MODE_UFS_HS_B. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: Andrew Halaney <ahalaney@redhat.com> # Qdrive3/sa8540p-ride Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20230114071009.88102-5-manivannan.sadhasivam@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-01-17phy: qcom-qmp-ufs: Move register settings to qmp_phy_cfg_tbls structManivannan Sadhasivam
As done for Qcom PCIe PHY driver, let's move the register settings to the common qmp_phy_cfg_tbls struct. This helps in adding any additional PHY settings needed for functionalities like HS-G4 in the future by adding one more instance of the qmp_phy_cfg_tbls. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: Andrew Halaney <ahalaney@redhat.com> # Qdrive3/sa8540p-ride Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20230114071009.88102-4-manivannan.sadhasivam@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-01-17phy: qcom-qmp-ufs: Rename MSM8996 PHY definitionsManivannan Sadhasivam
Only MSM8996 is using "_ufs_" naming convention for PHY definitions instead of "_ufsphy_" as like other SoCs. So to maintain the uniformity, let's rename all of the definitions to use "_ufsphy_". Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: Andrew Halaney <ahalaney@redhat.com> # Qdrive3/sa8540p-ride Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20230114071009.88102-3-manivannan.sadhasivam@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-01-17phy: qcom-qmp-ufs: Remove _tbl suffix from qmp_phy_init_tbl definitionsManivannan Sadhasivam
Following the other QMP PHY drivers like PCIe, let's remove the "_tbl" suffix from the qmp_phy_init_tbl definitions. This helps in maintaining the uniformity across all of the QMP PHY drivers. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: Andrew Halaney <ahalaney@redhat.com> # Qdrive3/sa8540p-ride Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20230114071009.88102-2-manivannan.sadhasivam@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-01-13phy: qcom-qmp: Add SM6125 UFS PHY supportLux Aliaga
The SM6125 UFS PHY is compatible with the one from SM6115. Add a compatible for it and modify the config from SM6115 to make them compatible with the SC8280XP binding Signed-off-by: Lux Aliaga <they@mint.lgbt> Reviewed-by: Martin Botka <martin.botka@somainline.org> Link: https://lore.kernel.org/r/20230108195336.388349-4-they@mint.lgbt Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-01-13phy: Revert "phy: qualcomm: usb28nm: Add MDM9607 init sequence"Marijn Suijten
This reverts commit 557a28811c7e0286d3816842032db5eb7bb5f156. This commit introduced an init sequence from downstream DT [1] in the driver. As mentioned by the comment above the HSPHY_INIT_CFG macro for this sequence: /* * The macro is used to define an initialization sequence. Each tuple * is meant to program 'value' into phy register at 'offset' with 'delay' * in us followed. */ Instead of corresponding to offsets into the phy register, the sequence read by the downstream driver [2] is passed into ulpi_write [3] which crafts the address-value pair into a new value and writes it into the same register at USB_ULPI_VIEWPORT [4]. In other words, this init sequence is programmed into the hardware in a totally different way than downstream and is unlikely to achieve the desired result, if the hsphy is working at all. An alternative method needs to be found to write these init values at the desired location. Fortunately mdm9607 did not land upstream yet [5] and should have its compatible revised to use the generic one, instead of a compatible that writes wrong data to the wrong registers. [1]: https://android.googlesource.com/kernel/msm/+/android-7.1.0_r0.2/arch/arm/boot/dts/qcom/mdm9607.dtsi#585 [2]: https://android.googlesource.com/kernel/msm/+/android-7.1.0_r0.2/drivers/usb/phy/phy-msm-usb.c#4183 [3]: https://android.googlesource.com/kernel/msm/+/android-7.1.0_r0.2/drivers/usb/phy/phy-msm-usb.c#468 [4]: https://android.googlesource.com/kernel/msm/+/android-7.1.0_r0.2/drivers/usb/phy/phy-msm-usb.c#418 [5]: https://lore.kernel.org/linux-arm-msm/20210805222812.40731-1-konrad.dybcio@somainline.org/ Reported-by: Michael Srba <Michael.Srba@seznam.cz> Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Stephan Gerhold <stephan@gerhold.net> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Link: https://lore.kernel.org/r/20221214223733.648167-1-marijn.suijten@somainline.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-01-13phy: qcom-qmp-usb: Add Qualcomm SM6115 / SM4250 USB3 PHY supportBhupesh Sharma
Enable SM6115 / SM4250 USB3 PHY support by adding the qmp_phy_cfg data. Since this PHY is the same as the one used on QCM2290, reuse the QCM2290 qmp_phy_cfg data already available. Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> Link: https://lore.kernel.org/r/20221213122843.454845-4-bhupesh.sharma@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-01-13phy: qcom-qmp-usb: Fix QSERDES_V3_RX_UCDR_PI_CONTROLS init valBhupesh Sharma
As per the Qualcomm QMP v3 PHY programming guide document, QSERDES_V3_RX_UCDR_PI_CONTROLS configuration should be set to an initial configuration value of 0x80. Fix the same. Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> Link: https://lore.kernel.org/r/20221213122843.454845-3-bhupesh.sharma@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-01-12phy: qcom-qmp: move type-specific headers to particular driverDmitry Baryshkov
Remove QMP PHY type-specific headers inclusion from the common header and move them to the specific PHY drivers to cleanup the namespaces used by different drivers. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20221110192248.873973-14-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-01-12phy: qcom-qmp-usb: fix regs layout arraysDmitry Baryshkov
Drop qcm2290_usb3phy_regs_layout, it is a duplicate of qmp_v3_usb3phy_regs_layout. Introduce qmp_v5_usb3phy_regs_layout to be used for sm8350 and sc8280xp. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20221110192248.873973-13-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-01-12phy: qcom-qmp-usb: rework regs layout arraysDmitry Baryshkov
Use symbolic names for the values inside reg layout arrays. New register names are added following the PCS register layout that is used by the particular PHY. Note: ipq8074 tables appear to use a mixture of v2 and v3 registers. This might need additional fixes. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20221110192248.873973-12-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-01-12phy: qcom-qmp-usb: remove QPHY_PCS_MISC_TYPEC_CTRL regDmitry Baryshkov
The QPHY_PCS_MISC_TYPEC_CTRL register is not used, remove it from register layout. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20221110192248.873973-11-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-01-12phy: qcom-qmp-usb: remove QPHY_PCS_LFPS_RXTERM_IRQ_STATUS regDmitry Baryshkov
The QPHY_PCS_LFPS_RXTERM_IRQ_STATUS register is not used, remove it from register layout. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20221110192248.873973-10-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-01-12phy: qcom-qmp-ufs: rename regs layout arraysDmitry Baryshkov
Rename regs layouts to follow the QMP PHY version. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20221110192248.873973-9-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-01-12phy: qcom-qmp-ufs: rework regs layout arraysDmitry Baryshkov
Use symbolic names for the values inside reg layout arrays. New register names are added following the PCS register layout that is used by the particular PHY. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20221110192248.873973-8-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-01-12phy: qcom-qmp-ufs: split UFS-specific v2 PCS registers to a separate headerDmitry Baryshkov
Follow other QMP headers, split and rename UFS-specific PCS registers to ease comparing regs differences. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20221110192248.873973-7-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-01-12phy: qcom-qmp-pcie-msm8996: rework regs layout arraysDmitry Baryshkov
Use symbolic names for the values inside reg layout arrays. New register names are added following the PCS register layout that is used by the particular PHY. Note: ipq8074 tables appear to use a mixture of v2 and v3 registers. This might need additional fixes. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20221110192248.873973-6-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-01-12phy: qcom-qmp-pcie: rename regs layout arraysDmitry Baryshkov
Rename regs layouts to follow the QMP PHY version. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20221110192248.873973-5-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-01-12phy: qcom-qmp-pcie: rework regs layout arraysDmitry Baryshkov
Use symbolic names for the values inside reg layout arrays. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20221110192248.873973-4-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-01-12phy: qcom-qmp: remove duplicate v5_5nm register definitionsDmitry Baryshkov
Remove duplicate defines from phy-qcom-qmp-qserdes-txrx-v5_5nm.h Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20221110192248.873973-3-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-01-12phy: qcom-qmp: fix typo in QSERDES_COM_CMN_RSVD5 valueDmitry Baryshkov
Fix typo in QSERDES_COM_CMN_RSVD5 register definition. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20221110192248.873973-2-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-01-12phy: qcom-qmp-ufs: provide symbol clocksDmitry Baryshkov
Register three UFS symbol clocks (ufs_rx_symbol_0_clk_src, ufs_rx_symbol_1_clk_src ufs_tx_symbol_0_clk_src). Register OF clock provider to let other devices link these clocks through the DT. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20221123104443.3415267-3-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-01-12phy: qualcomm: pcie2: register as clock providerDmitry Baryshkov
Register pcie2 PHY as a clock provider to enable using it in the DT-based clock lookup. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20221229115932.3312318-3-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-01-12phy: qcom-qmp-pcie: add support for sm8350 platformDmitry Baryshkov
Add support for a single-lane and two-lane PCIe PHYs found on Qualcomm SM8350 platform. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20221118233242.2904088-7-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-01-12phy: qcom-qmp-pcie: rename the sm8450 gen3 PHY config tablesDmitry Baryshkov
SM8350 PHY config tables are mostly the same as SM8450 gen3 PHY config tables. Rename generic tables to remove x1 suffix. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20221118233242.2904088-6-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-01-12phy: qcom-qmp-pcie: split sm8450 gen3 PHY config tablesDmitry Baryshkov
SM8350 PHY config tables are mostly the same as SM8450 gen3 PHY config tables. Split these tables to be used by SM8350 config. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20221118233242.2904088-5-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-11-24phy: qcom-qmp-pcie: drop redundant clock allocationJohan Hovold
Since the QMP driver split, there is no reason to allocate the fixed-rate pipe clock structure separately from the driver data. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20221111094239.11547-4-johan+linaro@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-11-24phy: qcom-qmp-usb: drop redundant clock allocationJohan Hovold
Since the QMP driver split, there is no reason to allocate the fixed-rate pipe clock structure separately from the driver data. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20221111094239.11547-3-johan+linaro@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-11-24phy: qcom-qmp: drop unused type headerJohan Hovold
The PHY type defines are no longer used in the PCIe, UFS and USB QMP drivers so drop the corresponding include. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20221111094239.11547-2-johan+linaro@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-11-24phy: qcom-qmp-usb: drop sc8280xp reference-clock sourceJohan Hovold
The source clock for the reference clock is not used by the PHY directly and should not be described by the devicetree (instead this relationship should be modelled in the clock driver). Drop the driver management of the reference-clock source for SC8280XP. Once the other clock drivers have been updated, the corresponding change can be done also for the other QMP v4 platforms. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221111093857.11360-3-johan+linaro@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-11-24phy: qcom-qmp-combo: add support for updated sc8280xp bindingJohan Hovold
Add support for the new SC8280XP binding. Note that the binding does not try to describe every register subregion and instead the driver holds the corresponding offsets. Also note that (possibly) unlike on earlier platforms, the TX registers are used by both the USB and DP implementation. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20221121085058.31213-14-johan+linaro@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-11-24phy: qcom-qmp-combo: rename DP_PHY register pointerJohan Hovold
The DP_PHY registers have erroneously been referred to as "PCS" registers since DisplayPort support was added to the QMP drivers (including in the devicetree binding). Rename the corresponding pointer to match the register names. Note that the repeated "dp" in the field name is intentional and this DP register block is called "DP_PHY" (not just "PHY"). Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20221121085058.31213-13-johan+linaro@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-11-24phy: qcom-qmp-combo: rename common-register pointersJohan Hovold
The common registers are shared by the USB and DP parts of the PHY so drop the misleading "dp" prefix from the corresponding pointers. Note that the "DP" prefix could also be dropped from the corresponding defines, but leave that in place for now. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20221121085058.31213-12-johan+linaro@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-11-24phy: qcom-qmp-combo: clean up DP clock callbacksJohan Hovold
Clean up the DP clock callbacks somewhat by dropping the redundant "qcom" prefix and removing line breaks after type specifiers. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20221121085058.31213-11-johan+linaro@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-11-24phy: qcom-qmp-combo: separate clock and provider registrationJohan Hovold
In preparation for supporting devicetree bindings which do not use child nodes, separate clock registration from clock-provider registration. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20221121085058.31213-10-johan+linaro@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-11-24phy: qcom-qmp-combo: add clock registration helperJohan Hovold
In preparation for supporting devicetree bindings which do not use child nodes, add a clock registration helper to handle the registration of both the USB and DP clocks. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20221121085058.31213-9-johan+linaro@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-30 18:54:42 +0000