summaryrefslogtreecommitdiff
path: root/drivers/perf
AgeCommit message (Collapse)Author
2025-05-02perf: arm_pmu: Don't disable counter in armpmu_add()Mark Rutland
[ Upstream commit dcca27bc1eccb9abc2552aab950b18a9742fb8e7 ] Currently armpmu_add() tries to handle a newly-allocated counter having a stale associated event, but this should not be possible, and if this were to happen the current mitigation is insufficient and potentially expensive. It would be better to warn if we encounter the impossible case. Calls to pmu::add() and pmu::del() are serialized by the core perf code, and armpmu_del() clears the relevant slot in pmu_hw_events::events[] before clearing the bit in pmu_hw_events::used_mask such that the counter can be reallocated. Thus when armpmu_add() allocates a counter index from pmu_hw_events::used_mask, it should not be possible to observe a stale even in pmu_hw_events::events[] unless either pmu_hw_events::used_mask or pmu_hw_events::events[] have been corrupted. If this were to happen, we'd end up with two events with the same event->hw.idx, which would clash with each other during reprogramming, deletion, etc, and produce bogus results. Add a WARN_ON_ONCE() for this case so that we can detect if this ever occurs in practice. That possiblity aside, there's no need to call arm_pmu::disable(event) for the new event. The PMU reset code initialises the counter in a disabled state, and armpmu_del() will disable the counter before it can be reused. Remove the redundant disable. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> Tested-by: James Clark <james.clark@linaro.org> Link: https://lore.kernel.org/r/20250218-arm-brbe-v19-v20-2-4e9922fc2e8e@kernel.org Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-23perf/smmuv3: Enable HiSilicon Erratum 162001900 quirk for HIP08/09Yicong Yang
[ Upstream commit 0242737dc4eb9f6e9a5ea594b3f93efa0b12f28d ] Some HiSilicon SMMU PMCG suffers the erratum 162001900 that the PMU disable control sometimes fail to disable the counters. This will lead to error or inaccurate data since before we enable the counters the counter's still counting for the event used in last perf session. This patch tries to fix this by hardening the global disable process. Before disable the PMU, writing an invalid event type (0xffff) to focibly stop the counters. Correspondingly restore each events on pmu::pmu_enable(). Signed-off-by: Yicong Yang <yangyicong@hisilicon.com> Link: https://lore.kernel.org/r/20230814124012.58013-1-yangyicong@huawei.com Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-23perf/imx_ddr: don't enable counter0 if none of 4 counters are usedXu Yang
[ Upstream commit f4e2bd91ddf5e8543cbe7ad80b3fba3d2dc63fa3 ] In current driver, counter0 will be enabled after ddr_perf_pmu_enable() is called even though none of the 4 counters are used. This will cause counter0 continue to count until ddr_perf_pmu_disabled() is called. If pmu is not disabled all the time, the pmu interrupt will be asserted from time to time due to counter0 will overflow and irq handler will clear it. It's not an expected behavior. This patch will not enable counter0 if none of 4 counters are used. Fixes: 9a66d36cc7ac ("drivers/perf: imx_ddr: Add DDR performance counter support to perf") Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Link: https://lore.kernel.org/r/20230811015438.1999307-2-xu.yang_2@nxp.com Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-18perf/smmuv3: Fix hotplug callback leak in arm_smmu_pmu_init()Shang XiaoJing
[ Upstream commit 6f2d566b46436a50a80d6445e82879686b89588c ] arm_smmu_pmu_init() won't remove the callback added by cpuhp_setup_state_multi() when platform_driver_register() failed. Remove the callback by cpuhp_remove_multi_state() in fail path. Similar to the handling of arm_ccn_init() in commit 26242b330093 ("bus: arm-ccn: Prevent hotplug callback leak") Fixes: 7d839b4b9e00 ("perf/smmuv3: Add arm64 smmuv3 pmu driver") Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com> Reviewed-by: Punit Agrawal <punit.agrawal@bytedance.com> Link: https://lore.kernel.org/r/20221115115540.6245-3-shangxiaojing@huawei.com Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-18perf: arm_dsu: Fix hotplug callback leak in dsu_pmu_init()Yuan Can
[ Upstream commit facafab7611f7b872c6b9eeaff53461ef11f482e ] dsu_pmu_init() won't remove the callback added by cpuhp_setup_state_multi() when platform_driver_register() failed. Remove the callback by cpuhp_remove_multi_state() in fail path. Similar to the handling of arm_ccn_init() in commit 26242b330093 ("bus: arm-ccn: Prevent hotplug callback leak") Fixes: 7520fa99246d ("perf: ARM DynamIQ Shared Unit PMU support") Signed-off-by: Yuan Can <yuancan@huawei.com> Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com> Link: https://lore.kernel.org/r/20221115070207.32634-2-yuancan@huawei.com Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-20perf/arm_pmu_platform: fix tests for platform_get_irq() failureYu Zhe
[ Upstream commit 6bb0d64c100091e131cd16710b62fda3319cd0af ] The platform_get_irq() returns negative error codes. It can't actually return zero. Signed-off-by: Yu Zhe <yuzhe@nfschina.com> Link: https://lore.kernel.org/r/20220825011844.8536-1-yuzhe@nfschina.com Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-27arm_pmu: Validate single/group leader eventsRob Herring
commit e5c23779f93d45e39a52758ca593bd7e62e9b4be upstream. In the case where there is only a cycle counter available (i.e. PMCR_EL0.N is 0) and an event other than CPU cycles is opened, the open should fail as the event can never possibly be scheduled. However, the event validation when an event is opened is skipped when the group leader is opened. Fix this by always validating the group leader events. Reported-by: Al Grant <al.grant@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Link: https://lore.kernel.org/r/20220408203330.4014015-1-robh@kernel.org Cc: <stable@vger.kernel.org> Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-20perf/imx_ddr: Fix undefined behavior due to shift overflowing the constantBorislav Petkov
[ Upstream commit d02b4dd84e1a90f7f1444d027c0289bf355b0d5a ] Fix: In file included from <command-line>:0:0: In function ‘ddr_perf_counter_enable’, inlined from ‘ddr_perf_irq_handler’ at drivers/perf/fsl_imx8_ddr_perf.c:651:2: ././include/linux/compiler_types.h:352:38: error: call to ‘__compiletime_assert_729’ \ declared with attribute error: FIELD_PREP: mask is not constant _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__) ... See https://lore.kernel.org/r/YkwQ6%2BtIH8GQpuct@zn.tnic for the gory details as to why it triggers with older gccs only. Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Frank Li <Frank.li@nxp.com> Cc: Will Deacon <will@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: linux-arm-kernel@lists.infradead.org Acked-by: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20220405151517.29753-10-bp@alien8.de Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-15perf: qcom_l2_pmu: fix an incorrect NULL check on list iteratorXiaomeng Tong
commit 2012a9e279013933885983cbe0a5fe828052563b upstream. The bug is here: return cluster; The list iterator value 'cluster' will *always* be set and non-NULL by list_for_each_entry(), so it is incorrect to assume that the iterator value will be NULL if the list is empty or no element is found. To fix the bug, return 'cluster' when found, otherwise return NULL. Cc: stable@vger.kernel.org Fixes: 21bdbb7102ed ("perf: add qcom l2 cache perf events driver") Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com> Link: https://lore.kernel.org/r/20220327055733.4070-1-xiam0nd.tong@gmail.com Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-14drivers/perf: fix the missed ida_simple_remove() in ddr_perf_probe()Jing Xiangfeng
[ Upstream commit d96b1b8c9f79b6bb234a31c80972a6f422079376 ] ddr_perf_probe() misses to call ida_simple_remove() in an error path. Jump to cpuhp_state_err to fix it. Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Link: https://lore.kernel.org/r/20210617122614.166823-1-jingxiangfeng@huawei.com Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-14perf/smmuv3: Don't trample existing events with global filterRobin Murphy
commit 4c1daba15c209b99d192f147fea3dade30f72ed2 upstream. With global filtering, we only allow an event to be scheduled if its filter settings exactly match those of any existing events, therefore it is pointless to reapply the filter in that case. Much worse, though, is that in doing that we trample the event type of counter 0 if it's already active, and never touch the appropriate PMEVTYPERn so the new event is likely not counting the right thing either. Don't do that. CC: stable@vger.kernel.org Signed-off-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/32c80c0e46237f49ad8da0c9f8864e13c4a803aa.1623153312.git.robin.murphy@arm.com Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-11perf/arm_pmu_platform: Fix error handlingRobin Murphy
[ Upstream commit e338cb6bef254821a8c095018fd27254d74bfd6a ] If we're aborting after failing to register the PMU device, we probably don't want to leak the IRQs that we've claimed. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/53031a607fc8412a60024bfb3bb8cd7141f998f5.1616774562.git.robin.murphy@arm.com Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-29drivers/perf: thunderx2_pmu: Fix memory resource error handlingMark Salter
[ Upstream commit 688494a407d1419a6b158c644b262c61cde39f48 ] In tx2_uncore_pmu_init_dev(), a call to acpi_dev_get_resources() is used to create a list _CRS resources which is searched for the device base address. There is an error check following this: if (!rentry->res) return NULL In no case, will rentry->res be NULL, so the test is useless. Even if the test worked, it comes before the resource list memory is freed. None of this really matters as long as the ACPI table has the memory resource. Let's clean it up so that it makes sense and will give a meaningful error should firmware leave out the memory resource. Fixes: 69c32972d593 ("drivers/perf: Add Cavium ThunderX2 SoC UNCORE PMU driver") Signed-off-by: Mark Salter <msalter@redhat.com> Link: https://lore.kernel.org/r/20200915204110.326138-2-msalter@redhat.com Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-29drivers/perf: xgene_pmu: Fix uninitialized resource structMark Salter
[ Upstream commit a76b8236edcf5b785d044b930f9e14ad02b4a484 ] This splat was reported on newer Fedora kernels booting on certain X-gene based machines: xgene-pmu APMC0D83:00: X-Gene PMU version 3 Unable to handle kernel read from unreadable memory at virtual \ address 0000000000004006 ... Call trace: string+0x50/0x100 vsnprintf+0x160/0x750 devm_kvasprintf+0x5c/0xb4 devm_kasprintf+0x54/0x60 __devm_ioremap_resource+0xdc/0x1a0 devm_ioremap_resource+0x14/0x20 acpi_get_pmu_hw_inf.isra.0+0x84/0x15c acpi_pmu_dev_add+0xbc/0x21c acpi_ns_walk_namespace+0x16c/0x1e4 acpi_walk_namespace+0xb4/0xfc xgene_pmu_probe_pmu_dev+0x7c/0xe0 xgene_pmu_probe.part.0+0x2c0/0x310 xgene_pmu_probe+0x54/0x64 platform_drv_probe+0x60/0xb4 really_probe+0xe8/0x4a0 driver_probe_device+0xe4/0x100 device_driver_attach+0xcc/0xd4 __driver_attach+0xb0/0x17c bus_for_each_dev+0x6c/0xb0 driver_attach+0x30/0x40 bus_add_driver+0x154/0x250 driver_register+0x84/0x140 __platform_driver_register+0x54/0x60 xgene_pmu_driver_init+0x28/0x34 do_one_initcall+0x40/0x204 do_initcalls+0x104/0x144 kernel_init_freeable+0x198/0x210 kernel_init+0x20/0x12c ret_from_fork+0x10/0x18 Code: 91000400 110004e1 eb08009f 540000c0 (38646846) ---[ end trace f08c10566496a703 ]--- This is due to use of an uninitialized local resource struct in the xgene pmu driver. The thunderx2_pmu driver avoids this by using the resource list constructed by acpi_dev_get_resources() rather than using a callback from that function. The callback in the xgene driver didn't fully initialize the resource. So get rid of the callback and search the resource list as done by thunderx2. Fixes: 832c927d119b ("perf: xgene: Add APM X-Gene SoC Performance Monitoring Unit driver") Signed-off-by: Mark Salter <msalter@redhat.com> Link: https://lore.kernel.org/r/20200915204110.326138-1-msalter@redhat.com Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-29drivers/perf: Prevent forced unbinding of PMU driversQi Liu
[ Upstream commit f32ed8eb0e3f0d0ef4ddb854554d60ca5863a9f9 ] Forcefully unbinding PMU drivers during perf sampling will lead to a kernel panic, because the perf upper-layer framework call a NULL pointer in this situation. To solve this issue, "suppress_bind_attrs" should be set to true, so that bind/unbind can be disabled via sysfs and prevent unbinding PMU drivers during perf sampling. Signed-off-by: Qi Liu <liuqi115@huawei.com> Reviewed-by: John Garry <john.garry@huawei.com> Link: https://lore.kernel.org/r/1594975763-32966-1-git-send-email-liuqi115@huawei.com Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-29drivers/perf: Fix kernel panic when rmmod PMU modules during perf samplingQi Liu
[ Upstream commit bdc5c744c7b6457d18a95c26769dad0e7f480a08 ] When users try to remove PMU modules during perf sampling, kernel panic will happen because the pmu->read() is a NULL pointer here. INFO on HiSilicon hip08 platform as follow: pc : hisi_uncore_pmu_event_update+0x30/0xa4 [hisi_uncore_pmu] lr : hisi_uncore_pmu_read+0x20/0x2c [hisi_uncore_pmu] sp : ffff800010103e90 x29: ffff800010103e90 x28: ffff0027db0c0e40 x27: ffffa29a76f129d8 x26: ffffa29a77ceb000 x25: ffffa29a773a5000 x24: ffffa29a77392000 x23: ffffddffe5943f08 x22: ffff002784285960 x21: ffff002784285800 x20: ffff0027d2e76c80 x19: ffff0027842859e0 x18: ffff80003498bcc8 x17: ffffa29a76afe910 x16: ffffa29a7583f530 x15: 16151a1512061a1e x14: 0000000000000000 x13: ffffa29a76f1e238 x12: 0000000000000001 x11: 0000000000000400 x10: 00000000000009f0 x9 : ffff8000107b3e70 x8 : ffff0027db0c1890 x7 : ffffa29a773a7000 x6 : 00000007f5131013 x5 : 00000007f5131013 x4 : 09f257d417c00000 x3 : 00000002187bd7ce x2 : ffffa29a38f0f0d8 x1 : ffffa29a38eae268 x0 : ffff0027d2e76c80 Call trace: hisi_uncore_pmu_event_update+0x30/0xa4 [hisi_uncore_pmu] hisi_uncore_pmu_read+0x20/0x2c [hisi_uncore_pmu] __perf_event_read+0x1a0/0x1f8 flush_smp_call_function_queue+0xa0/0x160 generic_smp_call_function_single_interrupt+0x18/0x20 handle_IPI+0x31c/0x4dc gic_handle_irq+0x2c8/0x310 el1_irq+0xcc/0x180 arch_cpu_idle+0x4c/0x20c default_idle_call+0x20/0x30 do_idle+0x1b4/0x270 cpu_startup_entry+0x28/0x30 secondary_start_kernel+0x1a4/0x1fc To solve the above issue, current module should be registered to kernel, so that try_module_get() can be invoked when perf sampling starts. This adds the reference counting of module and could prevent users from removing modules during sampling. Reported-by: Haifeng Wang <wang.wanghaifeng@huawei.com> Signed-off-by: Qi Liu <liuqi115@huawei.com> Reviewed-by: John Garry <john.garry@huawei.com> Link: https://lore.kernel.org/r/1594891165-8228-1-git-send-email-liuqi115@huawei.com Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-24drivers/perf: hisi: Fix wrong value for all counters enableShaokun Zhang
[ Upstream commit 961abd78adcb4c72c343fcd9f9dc5e2ebbe9b448 ] In L3C uncore PMU drivers, bit16 is used to control all counters enable & disable. Wrong value is given in the driver and its default value is 1'b1, it can work because each PMU counter has its own control bits too. Let's fix the wrong value. Fixes: 2940bc433370 ("perf: hisi: Add support for HiSilicon SoC L3C PMU driver") Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com> Cc: Will Deacon <will@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Link: https://lore.kernel.org/r/1591350221-32275-1-git-send-email-zhangshaokun@hisilicon.com Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-22drivers/perf: hisi: Fix typo in events attribute arrayShaokun Zhang
[ Upstream commit 88562f06ebf56587788783e5420f25fde3ca36c8 ] Fix up one typo: wr_dr_64b -> wr_ddr_64b. Fixes: 2bab3cf9104c ("perf: hisi: Add support for HiSilicon SoC HHA PMU driver") Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com> Cc: Will Deacon <will@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Link: https://lore.kernel.org/r/1587643530-34357-1-git-send-email-zhangshaokun@hisilicon.com Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-22pmu/smmuv3: Clear IRQ affinity hint on device removalJean-Philippe Brucker
[ Upstream commit 10f6cd2af21bb44faab31a50ec3361d7649e5a39 ] Currently when trying to remove the SMMUv3 PMU module we get a WARN_ON_ONCE from free_irq(), because the affinity hint set during probe hasn't been properly cleared. [ 238.878383] WARNING: CPU: 0 PID: 175 at kernel/irq/manage.c:1744 free_irq+0x324/0x358 ... [ 238.897263] Call trace: [ 238.897998] free_irq+0x324/0x358 [ 238.898792] devm_irq_release+0x18/0x28 [ 238.899189] release_nodes+0x1b0/0x228 [ 238.899984] devres_release_all+0x38/0x60 [ 238.900779] device_release_driver_internal+0x10c/0x1d0 [ 238.901574] driver_detach+0x50/0xe0 [ 238.902368] bus_remove_driver+0x5c/0xd8 [ 238.903448] driver_unregister+0x30/0x60 [ 238.903958] platform_driver_unregister+0x14/0x20 [ 238.905075] arm_smmu_pmu_exit+0x1c/0xecc [arm_smmuv3_pmu] [ 238.905547] __arm64_sys_delete_module+0x14c/0x260 [ 238.906342] el0_svc_common.constprop.0+0x74/0x178 [ 238.907355] do_el0_svc+0x24/0x90 [ 238.907932] el0_sync_handler+0x11c/0x198 [ 238.908979] el0_sync+0x158/0x180 Just like the other perf drivers, clear the affinity hint before releasing the device. Fixes: 7d839b4b9e00 ("perf/smmuv3: Add arm64 smmuv3 pmu driver") Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Link: https://lore.kernel.org/r/20200422084805.237738-1-jean-philippe@linaro.org Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-03-25drivers/perf: arm_pmu_acpi: Fix incorrect checking of gicc pointerluanshi
[ Upstream commit 3ba52ad55b533760a1f65836aa0ec9d35e36bb4f ] Fix bogus NULL checks on the return value of acpi_cpu_get_madt_gicc() by checking for a 0 'gicc->performance_interrupt' value instead. Signed-off-by: Liguang Zhang <zhangliguang@linux.alibaba.com> Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-03-25drivers/perf: fsl_imx8_ddr: Correct the CLEAR bit definitionJoakim Zhang
[ Upstream commit 049d919168458ac54e7fad27cd156a958b042d2f ] When disabling a counter from ddr_perf_event_stop(), the counter value is reset to 0 at the same time. Preserve the counter value by performing a read-modify-write of the PMU register and clearing only the enable bit. Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-03-05perf/smmuv3: Use platform_get_irq_optional() for wired interruptJohn Garry
[ Upstream commit 0ca2c0319a7bce0e152b51b866979d62dc261e48 ] Even though a SMMUv3 PMCG implementation may use an MSI as the form of interrupt source, the kernel would still complain that it does not find the wired (GSIV) interrupt in this case: root@(none)$ dmesg | grep arm-smmu-v3-pmcg | grep "not found" [ 59.237219] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.8.auto: IRQ index 0 not found [ 59.322841] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.9.auto: IRQ index 0 not found [ 59.422155] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.10.auto: IRQ index 0 not found [ 59.539014] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.11.auto: IRQ index 0 not found [ 59.640329] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.12.auto: IRQ index 0 not found [ 59.743112] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.13.auto: IRQ index 0 not found [ 59.880577] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.14.auto: IRQ index 0 not found [ 60.017528] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.15.auto: IRQ index 0 not found Use platform_get_irq_optional() to silence the warning. If neither interrupt source is found, then the driver will still warn that IRQ setup errored and the probe will fail. Reviewed-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-02-24perf/imx_ddr: Fix cpu hotplug state cleanupLeonard Crestez
[ Upstream commit 9ee68b314e9aa63ed11b98beb8a68810b8234dcf ] This driver allocates a dynamic cpu hotplug state but never releases it. If reloaded in a loop it will quickly trigger a WARN message: "No more dynamic states available for CPU hotplug" Fix by calling cpuhp_remove_multi_state on remove like several other perf pmu drivers. Also fix the cleanup logic on probe error paths: add the missing cpuhp_remove_multi_state call and properly check the return value from cpuhp_state_add_instant_nocalls. Fixes: 9a66d36cc7ac ("drivers/perf: imx_ddr: Add DDR performance counter support to perf") Acked-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-02-01perf/imx_ddr: Add enhanced AXI ID filter supportJoakim Zhang
[ Upstream commit 44f8bd014a94ed679ddb77d0b92350d4ac4f23a5 ] With DDR_CAP_AXI_ID_FILTER quirk, indicating HW supports AXI ID filter which only can get bursts from DDR transaction, i.e. DDR read/write requests. This patch add DDR_CAP_AXI_ID_ENHANCED_FILTER quirk, indicating HW supports AXI ID filter which can get bursts and bytes from DDR transaction at the same time. We hope PMU always return bytes in the driver due to it is more meaningful for users. Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-12perf/smmuv3: Remove the leftover put_cpu() in error pathHanjun Guo
[ Upstream commit 8ae4bcf4821c18a8fbfa0b2c1df26c1085e9d923 ] In smmu_pmu_probe(), there is put_cpu() in the error path, which is wrong because we use raw_smp_processor_id() to get the cpu ID, not get_cpu(), remove it. While we are at it, kill 'out_cpuhp_err' altogether and just return err if we fail to add the hotplug instance. Acked-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Will Deacon <will@kernel.org> Signed-off-by: Hanjun Guo <guohanjun@huawei.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-08-30Merge branches 'for-next/52-bit-kva', 'for-next/cpu-topology', ↵Will Deacon
'for-next/error-injection', 'for-next/perf', 'for-next/psci-cpuidle', 'for-next/rng', 'for-next/smpboot', 'for-next/tbi' and 'for-next/tlbi' into for-next/core * for-next/52-bit-kva: (25 commits) Support for 52-bit virtual addressing in kernel space * for-next/cpu-topology: (9 commits) Move CPU topology parsing into core code and add support for ACPI 6.3 * for-next/error-injection: (2 commits) Support for function error injection via kprobes * for-next/perf: (8 commits) Support for i.MX8 DDR PMU and proper SMMUv3 group validation * for-next/psci-cpuidle: (7 commits) Move PSCI idle code into a new CPUidle driver * for-next/rng: (4 commits) Support for 'rng-seed' property being passed in the devicetree * for-next/smpboot: (3 commits) Reduce fragility of secondary CPU bringup in debug configurations * for-next/tbi: (10 commits) Introduce new syscall ABI with relaxed requirements for pointer tags * for-next/tlbi: (6 commits) Handle spurious page faults arising from kernel space
2019-08-28perf/imx_ddr: Add support for AXI ID filteringJoakim Zhang
AXI filtering is used by events 0x41 and 0x42 to count reads or writes with an ARID or AWID matching a specified filter. The filter is exposed to userspace as an (ID, MASK) pair, where each set bit in the mask causes the corresponding bit in the ID to be ignored when matching against the ID of memory transactions for the purposes of incrementing the counter. For example: # perf stat -a -e imx8_ddr0/axid-read,axi_mask=0xff,axi_id=0x800/ cmd will count all read transactions from AXI IDs 0x800 - 0x8ff. If the 'axi_mask' is omitted, then it is treated as 0x0 which means that the 'axi_id' will be matched exactly. Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: Will Deacon <will@kernel.org>
2019-08-27perf/smmuv3: Validate groups for global filteringRobin Murphy
With global filtering, it becomes possible for users to construct self-contradictory groups with conflicting filters. Make sure we cover that when initially validating events. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Will Deacon <will@kernel.org>
2019-08-27perf/smmuv3: Validate group sizeRobin Murphy
Ensure that a group will actually fit into the available counters. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Will Deacon <will@kernel.org>
2019-07-31perf: Remove dev_err() usage after platform_get_irq()Stephen Boyd
We don't need dev_err() messages when platform_get_irq() fails now that platform_get_irq() prints an error message itself when something goes wrong. Let's remove these prints with a simple semantic patch. // <smpl> @@ expression ret; struct platform_device *E; @@ ret = ( platform_get_irq(E, ...) | platform_get_irq_byname(E, ...) ); if ( \( ret < 0 \| ret <= 0 \) ) { ( -if (ret != -EPROBE_DEFER) -{ ... -dev_err(...); -... } | ... -dev_err(...); ) ... } // </smpl> While we're here, remove braces on if statements that only have one statement (manually). Cc: Will Deacon <will@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Will Deacon <will@kernel.org>
2019-07-31perf/imx_ddr: Add MODULE_DEVICE_TABLELeonard Crestez
This is required for automatic probing when driver is built as a module. Fixes: 9a66d36cc7ac ("drivers/perf: imx_ddr: Add DDR performance counter support to perf") Acked-by: Frank Li <frank.li@nxp.com> Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Will Deacon <will@kernel.org>
2019-07-29drivers/perf: arm_pmu: Fix failure path in PM notifierWill Deacon
Handling of the CPU_PM_ENTER_FAILED transition in the Arm PMU PM notifier code incorrectly skips restoration of the counters. Fix the logic so that CPU_PM_ENTER_FAILED follows the same path as CPU_PM_EXIT. Cc: <stable@vger.kernel.org> Fixes: da4e4f18afe0f372 ("drivers/perf: arm_pmu: implement CPU_PM notifier") Reported-by: Anders Roxell <anders.roxell@linaro.org> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Will Deacon <will@kernel.org>
2019-07-15docs: perf: move to the admin-guideMauro Carvalho Chehab
The perf infrastructure is used for userspace to track issues. At least a good part of what's described here is related to it. So, add it to the admin-guide. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-15docs: perf: convert to ReSTMauro Carvalho Chehab
Rename the perf documentation files to ReST, add an index for them and adjust in order to produce a nice html output via the Sphinx build system. At its new index.rst, let's add a :orphan: while this is not linked to the main index.rst file, in order to avoid build warnings. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-08Merge tag 'arm64-upstream' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Catalin Marinas: - arm64 support for syscall emulation via PTRACE_SYSEMU{,_SINGLESTEP} - Wire up VM_FLUSH_RESET_PERMS for arm64, allowing the core code to manage the permissions of executable vmalloc regions more strictly - Slight performance improvement by keeping softirqs enabled while touching the FPSIMD/SVE state (kernel_neon_begin/end) - Expose a couple of ARMv8.5 features to user (HWCAP): CondM (new XAFLAG and AXFLAG instructions for floating point comparison flags manipulation) and FRINT (rounding floating point numbers to integers) - Re-instate ARM64_PSEUDO_NMI support which was previously marked as BROKEN due to some bugs (now fixed) - Improve parking of stopped CPUs and implement an arm64-specific panic_smp_self_stop() to avoid warning on not being able to stop secondary CPUs during panic - perf: enable the ARM Statistical Profiling Extensions (SPE) on ACPI platforms - perf: DDR performance monitor support for iMX8QXP - cache_line_size() can now be set from DT or ACPI/PPTT if provided to cope with a system cache info not exposed via the CPUID registers - Avoid warning on hardware cache line size greater than ARCH_DMA_MINALIGN if the system is fully coherent - arm64 do_page_fault() and hugetlb cleanups - Refactor set_pte_at() to avoid redundant READ_ONCE(*ptep) - Ignore ACPI 5.1 FADTs reported as 5.0 (infer from the 'arm_boot_flags' introduced in 5.1) - CONFIG_RANDOMIZE_BASE now enabled in defconfig - Allow the selection of ARM64_MODULE_PLTS, currently only done via RANDOMIZE_BASE (and an erratum workaround), allowing modules to spill over into the vmalloc area - Make ZONE_DMA32 configurable * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (54 commits) perf: arm_spe: Enable ACPI/Platform automatic module loading arm_pmu: acpi: spe: Add initial MADT/SPE probing ACPI/PPTT: Add function to return ACPI 6.3 Identical tokens ACPI/PPTT: Modify node flag detection to find last IDENTICAL x86/entry: Simplify _TIF_SYSCALL_EMU handling arm64: rename dump_instr as dump_kernel_instr arm64/mm: Drop [PTE|PMD]_TYPE_FAULT arm64: Implement panic_smp_self_stop() arm64: Improve parking of stopped CPUs arm64: Expose FRINT capabilities to userspace arm64: Expose ARMv8.5 CondM capability to userspace arm64: defconfig: enable CONFIG_RANDOMIZE_BASE arm64: ARM64_MODULES_PLTS must depend on MODULES arm64: bpf: do not allocate executable memory arm64/kprobes: set VM_FLUSH_RESET_PERMS on kprobe instruction pages arm64/mm: wire up CONFIG_ARCH_HAS_SET_DIRECT_MAP arm64: module: create module allocations without exec permissions arm64: Allow user selection of ARM64_MODULE_PLTS acpi/arm64: ignore 5.1 FADTs that are reported as 5.0 arm64: Allow selecting Pseudo-NMI again ...
2019-06-27perf: arm_spe: Enable ACPI/Platform automatic module loadingJeremy Linton
Lets add the MODULE_TABLE and platform id_table entries so that the SPE driver can attach to the ACPI platform device created by the core pmu code. Tested-by: Hanjun Guo <hanjun.guo@linaro.org> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Jeremy Linton <jeremy.linton@arm.com> Signed-off-by: Will Deacon <will@kernel.org>
2019-06-27arm_pmu: acpi: spe: Add initial MADT/SPE probingJeremy Linton
ACPI 6.3 adds additional fields to the MADT GICC structure to describe SPE PPI's. We pick these out of the cached reference to the madt_gicc structure similarly to the core PMU code. We then create a platform device referring to the IRQ and let the user/module loader decide whether to load the SPE driver. Tested-by: Hanjun Guo <hanjun.guo@linaro.org> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Jeremy Linton <jeremy.linton@arm.com> Signed-off-by: Will Deacon <will@kernel.org>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 234Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 503 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Enrico Weigelt <info@metux.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190602204653.811534538@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-13drivers/perf: imx_ddr: Add DDR performance counter support to perfFrank Li
Add DDR performance monitor support for iMX8QXP. The PMU consists of 3 programmable event counters and a single dedicated cycle counter. Example usage: $ perf stat -a -e \ imx8_ddr0/read-cycles/,imx8_ddr0/write-cycles/,imx8_ddr0/precharge/ ls - or - $ perf stat -a -e \ imx8_ddr0/cycles/,imx8_ddr0/read-access/,imx8_ddr0/write-access/ ls Other events are supported, and advertised via perf list. Reviewed-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Frank Li <Frank.Li@nxp.com> [will: rewrote commit message/kconfig and used #defines for dev/cpuhp names] Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 284Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 and only version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 294 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141900.825281744@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 174Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 655 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070034.575739538@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-22Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: - Fix SPE probe failure when backing auxbuf with high-order pages - Fix handling of DMA allocations from outside of the vmalloc area - Fix generation of build-id ELF section for vDSO object - Disable huge I/O mappings if kernel page table dumping is enabled - A few other minor fixes (comments, kconfig etc) * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: vdso: Explicitly add build-id option arm64/mm: Inhibit huge-vmap with ptdump arm64: Print physical address of page table base in show_pte() arm64: don't trash config with compat symbol if COMPAT is disabled arm64: assembler: Update comment above cond_yield_neon() macro drivers/perf: arm_spe: Don't error on high-order pages for aux buf arm64/iommu: handle non-remapped addresses in ->mmap and ->get_sgtable
2019-05-21treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 13Thomas Gleixner
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details [based] [from] [clk] [highbank] [c] you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 355 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190519154041.837383322@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier for missed filesThomas Gleixner
Add SPDX license identifiers to all files which: - Have no license information of any form - Have EXPORT_.*_SYMBOL_GPL inside which was used in the initial scan/conversion to ignore the file These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-13drivers/perf: arm_spe: Don't error on high-order pages for aux bufWill Deacon
Since commit 5768402fd9c6 ("perf/ring_buffer: Use high order allocations for AUX buffers optimistically"), the perf core tends to back aux buffer allocations with high-order pages with the order encoded in the PagePrivate data. The Arm SPE driver explicitly rejects such pages, causing the perf tool to fail with: | failed to mmap with 12 (Cannot allocate memory) In actual fact, we can simply treat these pages just like any other since the perf core takes care to populate the page array appropriately. In theory we could try to map with PMDs where possible, but for now, let's just get things working again. Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Fixes: 5768402fd9c6 ("perf/ring_buffer: Use high order allocations for AUX buffers optimistically") Reported-by: Hanjun Guo <guohanjun@huawei.com> Tested-by: Hanjun Guo <guohanjun@huawei.com> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-04-23perf/arm-ccn: Clean up CPU hotplug handlingRobin Murphy
Like arm-cci, arm-ccn has the same issue of disabling preemption around operations which can take mutexes. Again, remove the definite bug by simply not trying to fight the theoretical races. And since we are touching the hotplug handling code, take the opportunity to streamline it, as there's really no need to store a full-sized cpumask to keep track of a single CPU ID. Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-04-23perf/arm-cci: Remove broken race mitigationRobin Murphy
Uncore PMU drivers face an awkward cyclic dependency wherein: - They have to pick a valid online CPU to associate with before registering the PMU device, since it will get exposed to userspace immediately. - The PMU registration has to be be at least partly complete before hotplug events can be handled, since trying to migrate an uninitialised context would be bad. - The hotplug handler has to be ready as soon as a CPU is chosen, lest it go offline without the user-visible cpumask value getting updated. The arm-cci driver has tried to solve this by using get_cpu() to pick the current CPU and prevent it from disappearing while both registrations are performed, but that results in taking mutexes with preemption disabled, which makes certain configurations very unhappy: [ 1.983337] BUG: sleeping function called from invalid context at kernel/locking/rtmutex.c:2004 [ 1.983340] in_atomic(): 1, irqs_disabled(): 0, pid: 1, name: swapper/0 [ 1.983342] Preemption disabled at: [ 1.983353] [<ffffff80089801f4>] cci_pmu_probe+0x1dc/0x488 [ 1.983360] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.18.20-rt8-yocto-preempt-rt #1 [ 1.983362] Hardware name: ZynqMP ZCU102 Rev1.0 (DT) [ 1.983364] Call trace: [ 1.983369] dump_backtrace+0x0/0x158 [ 1.983372] show_stack+0x24/0x30 [ 1.983378] dump_stack+0x80/0xa4 [ 1.983383] ___might_sleep+0x138/0x160 [ 1.983386] __might_sleep+0x58/0x90 [ 1.983391] __rt_mutex_lock_state+0x30/0xc0 [ 1.983395] _mutex_lock+0x24/0x30 [ 1.983400] perf_pmu_register+0x2c/0x388 [ 1.983404] cci_pmu_probe+0x2bc/0x488 [ 1.983409] platform_drv_probe+0x58/0xa8 It is not feasible to resolve all the possible races outside of the perf core itself, so address the immediate bug by following the example of nearly every other PMU driver and not even trying to do so. Registering the hotplug notifier first should minimise the window in which things can go wrong, so that's about as much as we can reasonably do here. This also revealed an additional race in assigning the global pointer too late relative to the hotplug notifier, which gets fixed in the process. Reported-by: Li, Meng <Meng.Li@windriver.com> Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-04-04perf/smmuv3: Enable HiSilicon Erratum 162001800 quirkShameer Kolothum
HiSilicon erratum 162001800 describes the limitation of SMMUv3 PMCG implementation on HiSilicon Hip08 platforms. On these platforms, the PMCG event counter registers (SMMU_PMCG_EVCNTRn) are read only and as a result it is not possible to set the initial counter period value on event monitor start. To work around this, the current value of the counter is read and used for delta calculations. OEM information from ACPI header is used to identify the affected hardware platforms. Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> [will: update silicon-errata.txt and add reason string to acpi match] Signed-off-by: Will Deacon <will.deacon@arm.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-03 21:12:39 +0000