| Age | Commit message (Collapse) | Author |
|---|
|
PCI Vendor-Specific (VSEC) Capabilities are defined by each vendor.
Devices from different vendors may advertise a VSEC Capability with the DWC
RAS DES functionality, but the vendors may assign different VSEC IDs.
Search for the DWC RAS DES Capability using the VSEC ID and VSEC Rev
chosen by the vendor.
This does not fix a current problem because Alibaba, Ampere, and Qualcomm
all assigned the same VSEC ID and VSEC Rev for the DWC RAS DES Capability.
The potential issue is that we may add support for a device from another
vendor, where the vendor has already assigned DWC_PCIE_VSEC_RAS_DES_ID
(0x02) for an unrelated VSEC. In that event, dwc_pcie_des_cap() would find
the unrelated VSEC and mistakenly assume it was a DWC RAS DES Capability.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-and-tested-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Reviewed-and-tested-by: Shuai Xue <xueshuai@linux.alibaba.com>
Link: https://lore.kernel.org/r/20241209222938.3219364-1-helgaas@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
According to Databook, L1 aux is event number 0x08 and
TX L0s and RX L0S is 0x09. Fix the event numbers for the
two events.
Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Reviewed-by: Shuai Xue <xueshuai@linux.alibaba.com>
Link: https://lore.kernel.org/r/20241205061914.5568-2-ilkka@os.amperecomputing.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Fix a few typos in event names
Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Reviewed-by: Jing Zhang <renyu.zj@linux.alibaba.com>
Reviewed-by: Shuai Xue <xueshuai@linux.alibaba.com>
Link: https://lore.kernel.org/r/20241008231824.5102-4-ilkka@os.amperecomputing.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Add support for Ampere SoCs by adding Ampere's vendor ID to the
vendor list.
Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20241008231824.5102-2-ilkka@os.amperecomputing.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Group #1 events had both upper and lower case characters in their names.
Trying to count such events with perf tool results in an error:
$ perf stat -e dwc_rootport_10008/Tx_PCIe_TLP_Data_Payload/ sleep 1
event syntax error: 'dwc_rootport_10008/Tx_PCIe_TLP_Data_Payload/'
\___ Bad event or PMU
Unable to find PMU or event on a PMU of 'dwc_rootport_10008'
event syntax error: '..port_10008/Tx_PCIe_TLP_Data_Payload/'
\___ unknown term 'Tx_PCIe_TLP_Data_Payload' for pmu 'dwc_rootport_10008'
valid terms: eventid,type,lane,config,config1,config2,config3,name,period,percore,metric-id
Run 'perf list' for a list of valid events
Usage: perf stat [<options>] [<command>]
-e, --event <event> event selector. use 'perf list' to list available events
Perf tool assumes the event names are either in lower or upper case. This
is also mentioned in
Documentation/ABI/testing/sysfs-bus-event_source-devices-events
"As performance monitoring event names are case
insensitive in the perf tool, the perf tool only looks
for lower or upper case event names in sysfs to avoid
scanning the directory. It is therefore required the
name of the event here is either lower or upper case."
Change the Group #1 events names to lower case.
Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20241016210136.65452-1-ilkka@os.amperecomputing.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The driver does not use the pmu_node field, so remove it.
Signed-off-by: Yunhui Cui <cuiyunhui@bytedance.com>
Reviewed-by: Shuai Xue <xueshuai@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240919034601.2453-1-cuiyunhui@bytedance.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Update the vendor table with QCOM PCIe vendorid.
Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com>
Reviewed-by: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20240816-dwc_pmu_fix-v2-4-198b8ab1077c@quicinc.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
When the PCIe devices are discovered late, the driver can't find
the PCIe devices and returns in the init without registering with
the bus notifier. Due to that the devices which are discovered late
the driver can't register for this.
Register for bus notifier & driver even if the device is not found
as part of init.
Fixes: af9597adc2f1 ("drivers/perf: add DesignWare PCIe PMU driver")
Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com>
Reviewed-by: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20240816-dwc_pmu_fix-v2-3-198b8ab1077c@quicinc.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
When there are multiple of instances of PCIe controllers, registration
to perf driver fails with this error.
sysfs: cannot create duplicate filename '/devices/platform/dwc_pcie_pmu.0'
CPU: 0 PID: 166 Comm: modprobe Not tainted 6.10.0-rc2-next-20240607-dirty
Hardware name: Qualcomm SA8775P Ride (DT)
Call trace:
dump_backtrace.part.8+0x98/0xf0
show_stack+0x14/0x1c
dump_stack_lvl+0x74/0x88
dump_stack+0x14/0x1c
sysfs_warn_dup+0x60/0x78
sysfs_create_dir_ns+0xe8/0x100
kobject_add_internal+0x94/0x224
kobject_add+0xa8/0x118
device_add+0x298/0x7b4
platform_device_add+0x1a0/0x228
platform_device_register_full+0x11c/0x148
dwc_pcie_register_dev+0x74/0xf0 [dwc_pcie_pmu]
dwc_pcie_pmu_init+0x7c/0x1000 [dwc_pcie_pmu]
do_one_initcall+0x58/0x1c0
do_init_module+0x58/0x208
load_module+0x1804/0x188c
__do_sys_init_module+0x18c/0x1f0
__arm64_sys_init_module+0x14/0x1c
invoke_syscall+0x40/0xf8
el0_svc_common.constprop.1+0x70/0xf4
do_el0_svc+0x18/0x20
el0_svc+0x28/0xb0
el0t_64_sync_handler+0x9c/0xc0
el0t_64_sync+0x160/0x164
kobject: kobject_add_internal failed for dwc_pcie_pmu.0 with -EEXIST,
don't try to register things with the same name in the same directory.
This is because of having same bdf value for devices under two different
controllers.
Update the logic to use sbdf which is a unique number in case of
multi instance also.
Fixes: af9597adc2f1 ("drivers/perf: add DesignWare PCIe PMU driver")
Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com>
Reviewed-by: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20240816-dwc_pmu_fix-v2-1-198b8ab1077c@quicinc.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
In general it's preferable to avoid placing cpumasks on the stack, as
for large values of NR_CPUS these can consume significant amounts of
stack space and make stack overflows more likely.
Use cpumask_any_and_but() to avoid the need for a temporary cpumask on
the stack.
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Dawei Li <dawei.li@shingroup.cn>
Reviewed-by: Shuai Xue <xueshuai@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240403155950.2068109-7-dawei.li@shingroup.cn
Signed-off-by: Will Deacon <will@kernel.org>
|
|
This commit adds the PCIe Performance Monitoring Unit (PMU) driver support
for T-Head Yitian SoC chip. Yitian is based on the Synopsys PCI Express
Core controller IP which provides statistics feature. The PMU is a PCIe
configuration space register block provided by each PCIe Root Port in a
Vendor-Specific Extended Capability named RAS D.E.S (Debug, Error
injection, and Statistics).
To facilitate collection of statistics the controller provides the
following two features for each Root Port:
- one 64-bit counter for Time Based Analysis (RX/TX data throughput and
time spent in each low-power LTSSM state) and
- one 32-bit counter for Event Counting (error and non-error events for
a specified lane)
Note: There is no interrupt for counter overflow.
This driver adds PMU devices for each PCIe Root Port. And the PMU device is
named based the BDF of Root Port. For example,
30:03.0 PCI bridge: Device 1ded:8000 (rev 01)
the PMU device name for this Root Port is dwc_rootport_3018.
Example usage of counting PCIe RX TLP data payload (Units of bytes)::
$# perf stat -a -e dwc_rootport_3018/Rx_PCIe_TLP_Data_Payload/
average RX bandwidth can be calculated like this:
PCIe TX Bandwidth = Rx_PCIe_TLP_Data_Payload / Measure_Time_Window
Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Yicong Yang <yangyicong@hisilicon.com>
Reviewed-and-tested-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20231208025652.87192-5-xueshuai@linux.alibaba.com
[will: Fix sparse error due to use of uninitialised 'vsec' symbol in
dwc_pcie_match_des_cap()]
Signed-off-by: Will Deacon <will@kernel.org>
|
