summaryrefslogtreecommitdiff
path: root/drivers/pci
AgeCommit message (Collapse)Author
2021-03-31PCI: Add pci_disable_parity()Bjorn Helgaas
Add pci_disable_parity() to disable reporting of parity errors for a device by clearing PCI_COMMAND_PARITY. The device will still set PCI_STATUS_DETECTED_PARITY when it detects a parity error or receives a Poisoned TLP, but it will not set PCI_STATUS_PARITY, which means it will not assert PERR# (conventional PCI) or report Poisoned TLPs (PCIe). Based-on: https://lore.kernel.org/linux-arm-kernel/d375987c-ea4f-dd98-4ef8-99b2fbfe7c33@gmail.com/ Based-on-patch-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/20210330174318.1289680-2-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-03-31PCI: xgene: Fix cfg resource mappingDejin Zheng
In commit e2dcd20b1645 a change was made to use devm_platform_ioremap_resource_byname() to simplify code and remove the res variable; this was wrong since the res variable is still needed and as an outcome the port->cfg_addr gets an erroneous address. Revert the change going back to original behaviour. Link: https://lore.kernel.org/r/20210328144118.305074-1-zhengdejin5@gmail.com Fixes: e2dcd20b1645a ("PCI: controller: Convert to devm_platform_ioremap_resource_byname()") Reported-by: dann.frazier@canonical.com Tested-by: dann frazier <dann.frazier@canonical.com> Signed-off-by: Dejin Zheng <zhengdejin5@gmail.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: stable@vger.kernel.org # v5.9+
2021-03-30PCI/VPD: Remove sysfs accessor size checking dead codeHeiner Kallweit
Since 104daa71b396 ("PCI: Determine actual VPD size on first access") attribute size is set to 0 (unlimited). Remove the dead code that checks for "bin_attr->size > 0". Link: https://lore.kernel.org/r/267eae86-f8a6-6792-a7f8-2c4fd51beedc@gmail.com Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Krzysztof Wilczyński <kw@linux.com>
2021-03-30PCI/VPD: Remove obsolete Broadcom NIC quirkHeiner Kallweit
quirk_brcm_570x_limit_vpd() was added in 2008 [0] when we didn't have the logic to determine VPD size based on checking for the VPD end tag. Now that we do have this logic [1] and don't read beyond the end tag, this quirk can be removed. [0] 99cb233d60cb ("PCI: Limit VPD read/write lengths for Broadcom 5706, 5708, 5709 rev.") [1] 104daa71b396 ("PCI: Determine actual VPD size on first access") Link: https://lore.kernel.org/r/daa6acdf-5027-62c8-e3fb-125411b018f5@gmail.com Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-03-29PCI: mediatek: Configure FC and FTS for functions other than 0Ryder Lee
"PCI_FUNC(port->slot << 3)" is always 0, so previously mtk_pcie_startup_port() only configured FC credits and FTs for function 0. Compute "func" correctly so we also configure functions other than 0. This affects MT2701 and MT7623. Link: https://lore.kernel.org/r/c529dbfc066f4bda9b87edbdbf771f207e69b84e.1604510053.git.ryder.lee@mediatek.com Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Krzysztof Wilczyński <kw@linux.com>
2021-03-26PCI: endpoint: Fix NULL pointer dereference for ->get_features()Shradha Todi
get_features ops of pci_epc_ops may return NULL, causing NULL pointer dereference in pci_epf_test_alloc_space function. Let us add a check for pci_epc_feature pointer in pci_epf_test_bind before we access it to avoid any such NULL pointer dereference and return -ENOTSUPP in case pci_epc_feature is not found. When the patch is not applied and EPC features is not implemented in the platform driver, we see the following dump due to kernel NULL pointer dereference. Call trace: pci_epf_test_bind+0xf4/0x388 pci_epf_bind+0x3c/0x80 pci_epc_epf_link+0xa8/0xcc configfs_symlink+0x1a4/0x48c vfs_symlink+0x104/0x184 do_symlinkat+0x80/0xd4 __arm64_sys_symlinkat+0x1c/0x24 el0_svc_common.constprop.3+0xb8/0x170 el0_svc_handler+0x70/0x88 el0_svc+0x8/0x640 Code: d2800581 b9403ab9 f9404ebb 8b394f60 (f9400400) ---[ end trace a438e3c5a24f9df0 ]--- Link: https://lore.kernel.org/r/20210324101609.79278-1-shradha.t@samsung.com Fixes: 2c04c5b8eef79 ("PCI: pci-epf-test: Use pci_epc_get_features() to get EPC features") Signed-off-by: Sriram Dash <dash.sriram@gmail.com> Signed-off-by: Shradha Todi <shradha.t@samsung.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Pankaj Dubey <pankaj.dubey@samsung.com> Reviewed-by: Kishon Vijay Abraham I <kishon@ti.com>
2021-03-24PCI: PM: Do not read power state in pci_enable_device_flags()Rafael J. Wysocki
It should not be necessary to update the current_state field of struct pci_dev in pci_enable_device_flags() before calling do_pci_enable_device() for the device, because none of the code between that point and the pci_set_power_state() call in do_pci_enable_device() invoked later depends on it. Moreover, doing that is actively harmful in some cases. For example, if the given PCI device depends on an ACPI power resource whose _STA method initially returns 0 ("off"), but the config space of the PCI device is accessible and the power state retrieved from the PCI_PM_CTRL register is D0, the current_state field in the struct pci_dev representing that device will get out of sync with the power.state of its ACPI companion object and that will lead to power management issues going forward. To avoid such issues it is better to leave the current_state value as is until it is changed to PCI_D0 by do_pci_enable_device() as appropriate. However, the power state of the device is not changed to PCI_D0 if it is already enabled when pci_enable_device_flags() gets called for it, so update its current_state in that case, but use pci_update_current_state() covering platform PM too for that. Link: https://lore.kernel.org/lkml/20210314000439.3138941-1-luzmaximilian@gmail.com/ Reported-by: Maximilian Luz <luzmaximilian@gmail.com> Tested-by: Maximilian Luz <luzmaximilian@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2021-03-23PCI: Release OF node in pci_scan_device()'s error pathDmitry Baryshkov
In pci_scan_device(), if pci_setup_device() fails for any reason, the code will not release device's of_node by calling pci_release_of_node(). Fix that by calling the release function. Fixes: 98d9f30c820d ("pci/of: Match PCI devices to OF nodes dynamically") Link: https://lore.kernel.org/r/20210124232826.1879-1-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
2021-03-23PCI: j721e: Add support to provide refclk to PCIe connectorKishon Vijay Abraham I
Add support to provide refclk to PCIe connector. Link: https://lore.kernel.org/r/20210308063550.6227-5-kishon@ti.com Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2021-03-23PCI: mobiveil: Improve PCIE_LAYERSCAPE_GEN4 dependenciesGeert Uytterhoeven
- Drop the dependency on PCI, as this is implied by the dependency on PCI_MSI_IRQ_DOMAIN, - Drop the dependencies on OF and ARM64, as the driver compiles fine without OF and/or on other architectures, - The Freescale Layerscape PCIe Gen4 controller is present only on Freescale Layerscape SoCs. Hence depend on ARCH_LAYERSCAPE, to prevent asking the user about this driver when configuring a kernel without Freescale Layerscape support, unless compile-testing. Link: https://lore.kernel.org/r/20210208142301.413582-1-geert+renesas@glider.be Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2021-03-22PCI: tegra: Fix typo for PCIe endpoint mode in Tegra194Wesley Sheng
In config PCIE_TEGRA194_EP the mode incorrectly is referred to as host mode. Fix it. Link: https://lore.kernel.org/r/20201231032539.22322-1-wesley.sheng@amd.com Signed-off-by: Wesley Sheng <wesley.sheng@amd.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Krzysztof Wilczyński <kw@linux.com> Acked-by: Vidya Sagar <vidyas@nvidia.com>
2021-03-22PCI: brcmstb: Fix error return code in brcm_pcie_probe()Wei Yongjun
Fix to return negative error code -ENODEV from the unsupported revision error handling case instead of 0, as done elsewhere in this function. Link: https://lore.kernel.org/r/20210308135619.19133-1-weiyongjun1@huawei.com Fixes: 0cdfaceb9889 ("PCI: brcmstb: support BCM4908 with external PERST# signal controller") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Krzysztof Wilczyński <kw@linux.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com>
2021-03-22PCI: layerscape: Correct syntax by changing comma to semicolonKrzysztof Wilczyński
Replace command with a semicolon to correct syntax and to prevent potential unspecified behaviour and/or unintended side effects. Related: https://lore.kernel.org/linux-pci/20201216131944.14990-1-zhengyongjun3@huawei.com/ Co-authored-by: Zheng Yongjun <zhengyongjun3@huawei.com> Link: https://lore.kernel.org/r/20210311033745.1547044-1-kw@linux.com Signed-off-by: Krzysztof Wilczyński <kw@linux.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Roy Zang <roy.zang@nxp.com>
2021-03-22PCI: keystone: Let AM65 use the pci_ops defined in pcie-designware-host.cKishon Vijay Abraham I
Both TI's AM65x (K3) and TI's K2 PCIe driver are implemented in pci-keystone. However Only K2 PCIe driver should use it's own pci_ops for configuration space accesses. But commit 10a797c6e54a ("PCI: dwc: keystone: Use pci_ops for config space accessors") used custom pci_ops for both AM65x and K2. This breaks configuration space access for AM65x platform. Fix it here. Link: https://lore.kernel.org/r/20210317131518.11040-1-kishon@ti.com Fixes: 10a797c6e54a ("PCI: dwc: keystone: Use pci_ops for config space accessors") Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Krzysztof Wilczyński <kw@linux.com> Cc: <stable@vger.kernel.org> # v5.10
2021-03-22PCI: microchip: Remove dev_err() when handing an error from platform_get_irq()Krzysztof Wilczyński
There is no need to call the dev_err() function directly to print a custom message when handling an error from either the platform_get_irq() or platform_get_irq_byname() functions as both are going to display an appropriate error message in case of a failure. This change is as per suggestions from Coccinelle, e.g., drivers/pci/controller/pcie-microchip-host.c:1027:2-9: line 1027 is redundant because platform_get_irq() already prints an error Related commit caecb05c8000 ("PCI: Remove dev_err() when handing an error from platform_get_irq()"). Link: https://lore.kernel.org/r/20210310131913.2802385-1-kw@linux.com Signed-off-by: Krzysztof Wilczyński <kw@linux.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2021-03-22PCI: microchip: Make some symbols staticWei Yongjun
The sparse tool complains as follows: drivers/pci/controller/pcie-microchip-host.c:304:18: warning: symbol 'pcie_event_to_event' was not declared. Should it be static? drivers/pci/controller/pcie-microchip-host.c:310:18: warning: symbol 'sec_error_to_event' was not declared. Should it be static? drivers/pci/controller/pcie-microchip-host.c:317:18: warning: symbol 'ded_error_to_event' was not declared. Should it be static? drivers/pci/controller/pcie-microchip-host.c:324:18: warning: symbol 'local_status_to_event' was not declared. Should it be static? Those symbols are not used outside of pcie-microchip-host.c, so this commit marks them static. Link: https://lore.kernel.org/r/20210308094842.3588847-1-weiyongjun1@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Krzysztof Wilczyński <kw@linux.com>
2021-03-22PCI: iproc: Fix return value of iproc_msi_irq_domain_alloc()Pali Rohár
IRQ domain alloc function should return zero on success. Non-zero value indicates failure. Link: https://lore.kernel.org/r/20210303142202.25780-1-pali@kernel.org Fixes: fc54bae28818 ("PCI: iproc: Allow allocation of multiple MSIs") Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Krzysztof Wilczyński <kw@linux.com> Acked-by: Ray Jui <ray.jui@broadcom.com> Acked-by: Marc Zyngier <maz@kernel.org>
2021-03-22PCI: vmd: Disable MSI-X remapping when possibleJon Derrick
VMD will retransmit child device MSI-X using its own MSI-X table and requester-id. This limits the number of MSI-X available to the whole child device domain to the number of VMD MSI-X interrupts. Some VMD devices have a mode where this remapping can be disabled, allowing child device interrupts to bypass processing with the VMD MSI-X domain interrupt handler and going straight the child device interrupt handler, allowing for better performance and scaling. The requester-id still gets changed to the VMD endpoint's requester-id, and the interrupt remapping handlers have been updated to properly set IRTE for child device interrupts to the VMD endpoint's context. Some VMD platforms have existing production BIOS which rely on MSI-X remapping and won't explicitly program the MSI-X remapping bit. This re-enables MSI-X remapping on unload. Link: https://lore.kernel.org/r/20210210161315.316097-3-jonathan.derrick@intel.com Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Krzysztof Wilczyński <kw@linux.com> Acked-by: Joerg Roedel <jroedel@suse.de>
2021-03-22PCI: tegra: Constify static structsRikard Falkeborn
The only usage of them is to assign their address to the 'ops' field in the pcie_port and the dw_pcie_ep structs, both which are pointers to const. Make them const to allow the compiler to put them in read-only memory. Link: https://lore.kernel.org/r/20210207221604.48910-1-rikard.falkeborn@gmail.com Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Krzysztof Wilczyński <kw@linux.com>
2021-03-22s390/pci: unify de-/configure for slots and eventsNiklas Schnelle
A zPCI event with PEC 0x0301 for an existing zPCI device goes through the same actions as enable_slot(). Similarly a zPCI event with PEC 0x0303 does the same steps as disable_slot(). We can thus unify both actions as zpci_configure_device() respectively zpci_deconfigure_device(). Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-03-22s390/pci: refactor zpci function statesNiklas Schnelle
The current zdev->state mixes the configuration states supported by CLP with an additional Online state which is used inconsistently to include enabled zPCI functions which are not yet visible to the common PCI subsytem. In preparation for a clean separation between architected configuration states and fine grained function states remove the Online function state. Where we previously checked for Online it is more accurate to check if the function is enabled to avoid an edge case where a disabled device was still treated as Online. This also simplifies checks whether a function is configured as this is now directly reflected by its function state. Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-03-21Merge tag 'powerpc-5.12-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - Fix a possible stack corruption and subsequent DLPAR failure in the rpadlpar_io PCI hotplug driver - Two build fixes for uncommon configurations Thanks to Christophe Leroy and Tyrel Datwyler. * tag 'powerpc-5.12-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: PCI: rpadlpar: Fix potential drc_name corruption in store functions powerpc: Force inlining of cpu_has_feature() to avoid build failure powerpc/vdso32: Add missing _restgpr_31_x to fix build failure
2021-03-19swiotlb: remove swiotlb_nr_tblChristoph Hellwig
All callers just use it to check if swiotlb is active at all, for which they can just use is_swiotlb_active. In the longer run drivers need to stop using is_swiotlb_active as well, but let's do the simple step first. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2021-03-17PCI: hv: Use tasklet_disable_in_atomic()Sebastian Andrzej Siewior
The hv_compose_msi_msg() callback in irq_chip::irq_compose_msi_msg is invoked via irq_chip_compose_msi_msg(), which itself is always invoked from atomic contexts from the guts of the interrupt core code. There is no way to change this w/o rewriting the whole driver, so use tasklet_disable_in_atomic() which allows to make tasklet_disable() sleepable once the remaining atomic users are addressed. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Wei Liu <wei.liu@kernel.org> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20210309084242.516519290@linutronix.de
2021-03-17PCI: rpadlpar: Fix potential drc_name corruption in store functionsTyrel Datwyler
Both add_slot_store() and remove_slot_store() try to fix up the drc_name copied from the store buffer by placing a NUL terminator at nbyte + 1 or in place of a '\n' if present. However, the static buffer that we copy the drc_name data into is not zeroed and can contain anything past the n-th byte. This is problematic if a '\n' byte appears in that buffer after nbytes and the string copied into the store buffer was not NUL terminated to start with as the strchr() search for a '\n' byte will mark this incorrectly as the end of the drc_name string resulting in a drc_name string that contains garbage data after the n-th byte. Additionally it will cause us to overwrite that '\n' byte on the stack with NUL, potentially corrupting data on the stack. The following debugging shows an example of the drmgr utility writing "PHB 4543" to the add_slot sysfs attribute, but add_slot_store() logging a corrupted string value. drmgr: drmgr: -c phb -a -s PHB 4543 -d 1 add_slot_store: drc_name = PHB 4543°|<82>!, rc = -19 Fix this by using strscpy() instead of memcpy() to ensure the string is NUL terminated when copied into the static drc_name buffer. Further, since the string is now NUL terminated the code only needs to change '\n' to '\0' when present. Cc: stable@vger.kernel.org Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com> [mpe: Reformat change log and add mention of possible stack corruption] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210315214821.452959-1-tyreld@linux.ibm.com
2021-03-16PCI: Add pci_find_vsec_capability() to find a specific VSECGustavo Pimentel
Add pci_find_vsec_capability() to locate a Vendor-Specific Extended Capability with the specified VSEC ID. The Vendor-Specific Extended Capability (VSEC) allows one or more proprietary capabilities defined by the vendor which aren't standard or shared between vendors. Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://lore.kernel.org/r/d89506834fb11c6fa0bd5d515c0dd55b13ac6958.1613674948.git.gustavo.pimentel@synopsys.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-03-15s390/pci: fix leak of PCI device structureNiklas Schnelle
In commit 05bc1be6db4b2 ("s390/pci: create zPCI bus") we removed the pci_dev_put() call matching the earlier pci_get_slot() done as part of __zpci_event_availability(). This was based on the wrong understanding that the device_put() done as part of pci_destroy_device() would counter the pci_get_slot() when it only counters the initial reference. This same understanding and existing bad example also lead to not doing a pci_dev_put() in zpci_remove_device(). Since releasing the PCI devices, unlike releasing the PCI slot, does not print any debug message for testing I added one in pci_release_dev(). This revealed that we are indeed leaking the PCI device on PCI hotunplug. Further testing also revealed another missing pci_dev_put() in disable_slot(). Fix this by adding the missing pci_dev_put() in disable_slot() and fix zpci_remove_device() with the correct pci_dev_put() calls. Also instead of calling pci_get_slot() in __zpci_event_availability() to determine if a PCI device is registered and then doing the same again in zpci_remove_device() do this once in zpci_remove_device() which makes sure that the pdev in __zpci_event_availability() is only used for the result of pci_scan_single_device() which does not need a reference count decremnt as its ownership goes to the PCI bus. Also move the check if zdev->zbus->bus is set into zpci_remove_device() since it may be that we're removing a device with devfn != 0 which never had a PCI bus. So we can still set the pdev->error_state to indicate that the device is not usable anymore, add a flag to set the error state. Fixes: 05bc1be6db4b2 ("s390/pci: create zPCI bus") Cc: <stable@vger.kernel.org> # 5.8+: e1bff843cde6 s390/pci: remove superfluous zdev->zbus check Cc: <stable@vger.kernel.org> # 5.8+: ba764dd703fe s390/pci: refactor zpci_create_device() Cc: <stable@vger.kernel.org> # 5.8+ Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-03-12Merge tag 'for-linus-5.12b-rc3-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: "Two fix series and a single cleanup: - a small cleanup patch to remove unneeded symbol exports - a series to cleanup Xen grant handling (avoiding allocations in some cases, and using common defines for "invalid" values) - a series to address a race issue in Xen event channel handling" * tag 'for-linus-5.12b-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: Xen/gntdev: don't needlessly use kvcalloc() Xen/gnttab: introduce common INVALID_GRANT_{HANDLE,REF} Xen/gntdev: don't needlessly allocate k{,un}map_ops[] Xen: drop exports of {set,clear}_foreign_p2m_mapping() xen/events: avoid handling the same event on two cpus at the same time xen/events: don't unmask an event channel when an eoi is pending xen/events: reset affinity of 2-level event when tearing it down
2021-03-11PCI: Fix kernel-doc errorsKrzysztof Wilczyński
Fix kernel-doc formatting errors, function names that don't match the doc, and some missing parameter documentation. These are reported by: make W=1 drivers/pci/ No functional change intended. [bhelgaas: squashed into one patch since this only changes comments] Link: https://lore.kernel.org/r/20210311001724.423356-1-kw@linux.com Link: https://lore.kernel.org/r/20210311001724.423356-2-kw@linux.com Link: https://lore.kernel.org/r/20210311001724.423356-3-kw@linux.com Link: https://lore.kernel.org/r/20210311001724.423356-4-kw@linux.com Link: https://lore.kernel.org/r/20210311001724.423356-5-kw@linux.com Link: https://lore.kernel.org/r/20210311001724.423356-6-kw@linux.com Link: https://lore.kernel.org/r/20210311001724.423356-7-kw@linux.com Link: https://lore.kernel.org/r/20210311001724.423356-8-kw@linux.com Signed-off-by: Krzysztof Wilczyński <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-03-11PCI: Avoid building empty driversArnd Bergmann
There are harmless warnings when compile testing the kernel with CONFIG_TRIM_UNUSED_KSYMS: drivers/pci/controller/dwc/pcie-al.o: no symbols drivers/pci/controller/pci-thunder-ecam.o: no symbols drivers/pci/controller/pci-thunder-pem.o: no symbols The problem here is that the host drivers get built even when the configuration symbols are all disabled, as they pretend to not be drivers but are silently enabled because of the promise that ACPI-based systems need no drivers. Add back the normal symbols to have these drivers built, and change the logic to otherwise only build them when both CONFIG_PCI_QUIRKS and CONFIG_ACPI are enabled. As a side-effect, this enables compile-testing the drivers on other architectures, which in turn needs the acpi_get_rc_resources() function to be defined. Link: https://lore.kernel.org/r/20210308152501.2135937-3-arnd@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Robert Richter <rric@kernel.org>
2021-03-11PCI: thunder: Fix compile testingArnd Bergmann
Compile-testing these drivers is currently broken. Enabling it causes a couple of build failures though: drivers/pci/controller/pci-thunder-ecam.c:119:30: error: shift count >= width of type [-Werror,-Wshift-count-overflow] drivers/pci/controller/pci-thunder-pem.c:54:2: error: implicit declaration of function 'writeq' [-Werror,-Wimplicit-function-declaration] drivers/pci/controller/pci-thunder-pem.c:392:8: error: implicit declaration of function 'acpi_get_rc_resources' [-Werror,-Wimplicit-function-declaration] Fix them with the obvious one-line changes. Link: https://lore.kernel.org/r/20210308152501.2135937-2-arnd@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Reviewed-by: Robert Richter <rric@kernel.org>
2021-03-11PCI: al: Select CONFIG_PCI_ECAMArnd Bergmann
Compile-testing this driver without ECAM support results in a link failure: ld.lld: error: undefined symbol: pci_ecam_map_bus >>> referenced by pcie-al.c >>> pci/controller/dwc/pcie-al.o:(al_pcie_map_bus) in archive drivers/built-in.a Select CONFIG_ECAM like the other drivers do. Link: https://lore.kernel.org/r/20210308152501.2135937-1-arnd@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Krzysztof Wilczyński <kw@linux.com>
2021-03-10Xen/gnttab: introduce common INVALID_GRANT_{HANDLE,REF}Jan Beulich
It's not helpful if every driver has to cook its own. Generalize xenbus'es INVALID_GRANT_HANDLE and pcifront's INVALID_GRANT_REF (which shouldn't have expanded to zero to begin with). Use the constants in p2m.c and gntdev.c right away, and update field types where necessary so they would match with the constants' types (albeit without touching struct ioctl_gntdev_grant_ref's ref field, as that's part of the public interface of the kernel and would require introducing a dependency on Xen's grant_table.h public header). Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/db7c38a5-0d75-d5d1-19de-e5fe9f0b9c48@suse.com Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2021-03-10PCI/RCEC: Fix RCiEP device to RCEC associationQiuxu Zhuo
rcec_assoc_rciep() used "rciep->devfn" (a single byte encoding both the device and function number) as the device number to check whether the corresponding bit was set in the RCEC's Association Bitmap for RCiEPs. But per PCIe r5.0, sec 7.9.10.2, "Association Bitmap for RCiEPs", the 32-bit bitmap contains one bit per device. That bit applies to all functions of the device. Fix rcec_assoc_rciep() to convert the value of "rciep->devfn" to a device number to ensure that RCiEP devices are correctly associated with the RCEC. Reported-and-tested-by: Wen Jin <wen.jin@intel.com> Fixes: 507b460f8144 ("PCI/ERR: Add pcie_link_rcec() to associate RCiEPs") Link: https://lore.kernel.org/r/20210222011717.43266-1-qiuxu.zhuo@intel.com Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Sean V Kelley <sean.v.kelley@intel.com>
2021-03-10PCI: pci-dra7xx: Prepare for deferred probe with module_platform_driverTony Lindgren
After updating pci-dra7xx driver to probe with ti-sysc and genpd, I noticed that dra7xx_pcie_probe() would not run if a power-domains property was configured for the interconnect target module. Turns out that module_platform_driver_probe uses platform_driver_probe(), while builtin_platform_driver uses platform_driver_register(). Only platform_driver_register() works for deferred probe as noted in the comments for __platform_driver_probe() in drivers/base/platform.c with a line saying "Note that this is incompatible with deferred probing". With module_platform_driver_probe, we have platform_driver_probe() produce -ENODEV error at device_initcall() level, and no further attempts are done. Let's fix this by using module_platform_driver instead. Note this is not an issue currently as we probe devices with simple-bus, and only is needed as we start probing the device with ti-sysc, or when probed with simple-pm-bus. Note that we must now also remove __init for probe related functions to avoid a section mismatch warning. Cc: linux-pci@vger.kernel.org Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Tested-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-02-25Merge tag 'pci-v5.12-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Remove unnecessary locking around _OSC (Bjorn Helgaas) - Clarify message about _OSC failure (Bjorn Helgaas) - Remove notification of PCIe bandwidth changes (Bjorn Helgaas) - Tidy checking of syscall user config accessors (Heiner Kallweit) Resource management: - Decline to resize resources if boot config must be preserved (Ard Biesheuvel) - Fix pci_register_io_range() memory leak (Geert Uytterhoeven) Error handling (Keith Busch): - Clear error status from the correct device - Retain error recovery status so drivers can use it after reset - Log the type of Port (Root or Switch Downstream) that we reset - Always request a reset for Downstream Ports in frozen state Endpoint framework and NTB (Kishon Vijay Abraham I): - Make *_get_first_free_bar() take into account 64 bit BAR - Add helper API to get the 'next' unreserved BAR - Make *_free_bar() return error codes on failure - Remove unused pci_epf_match_device() - Add support to associate secondary EPC with EPF - Add support in configfs to associate two EPCs with EPF - Add pci_epc_ops to map MSI IRQ - Add pci_epf_ops to expose function-specific attrs - Allow user to create sub-directory of 'EPF Device' directory - Implement ->msi_map_irq() ops for cadence - Configure LM_EP_FUNC_CFG based on epc->function_num_map for cadence - Add EP function driver to provide NTB functionality - Add support for EPF PCI Non-Transparent Bridge - Add specification for PCI NTB function device - Add PCI endpoint NTB function user guide - Add configfs binding documentation for pci-ntb endpoint function Broadcom STB PCIe controller driver: - Add support for BCM4908 and external PERST# signal controller (Rafał Miłecki) Cadence PCIe controller driver: - Retrain Link to work around Gen2 training defect (Nadeem Athani) - Fix merge botch in cdns_pcie_host_map_dma_ranges() (Krzysztof Wilczyński) Freescale Layerscape PCIe controller driver: - Add LX2160A rev2 EP mode support (Hou Zhiqiang) - Convert to builtin_platform_driver() (Michael Walle) MediaTek PCIe controller driver: - Fix OF node reference leak (Krzysztof Wilczyński) Microchip PolarFlare PCIe controller driver: - Add Microchip PolarFire PCIe controller driver (Daire McNamara) Qualcomm PCIe controller driver: - Use PHY_REFCLK_USE_PAD only for ipq8064 (Ansuel Smith) - Add support for ddrss_sf_tbu clock for sm8250 (Dmitry Baryshkov) Renesas R-Car PCIe controller driver: - Drop PCIE_RCAR config option (Lad Prabhakar) - Always allocate MSI addresses in 32bit space (Marek Vasut) Rockchip PCIe controller driver: - Add FriendlyARM NanoPi M4B DT binding (Chen-Yu Tsai) - Make 'ep-gpios' DT property optional (Chen-Yu Tsai) Synopsys DesignWare PCIe controller driver: - Work around ECRC configuration hardware defect (Vidya Sagar) - Drop support for config space in DT 'ranges' (Rob Herring) - Change size to u64 for EP outbound iATU (Shradha Todi) - Add upper limit address for outbound iATU (Shradha Todi) - Make dw_pcie ops optional (Jisheng Zhang) - Remove unnecessary dw_pcie_ops from al driver (Jisheng Zhang) Xilinx Versal CPM PCIe controller driver: - Fix OF node reference leak (Pan Bian) Miscellaneous: - Remove tango host controller driver (Arnd Bergmann) - Remove IRQ handler & data together (altera-msi, brcmstb, dwc) (Martin Kaiser) - Fix xgene-msi race in installing chained IRQ handler (Martin Kaiser) - Apply CONFIG_PCI_DEBUG to entire drivers/pci hierarchy (Junhao He) - Fix pci-bridge-emul array overruns (Russell King) - Remove obsolete uses of WARN_ON(in_interrupt()) (Sebastian Andrzej Siewior)" * tag 'pci-v5.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (69 commits) PCI: qcom: Use PHY_REFCLK_USE_PAD only for ipq8064 PCI: qcom: Add support for ddrss_sf_tbu clock dt-bindings: PCI: qcom: Document ddrss_sf_tbu clock for sm8250 PCI: al: Remove useless dw_pcie_ops PCI: dwc: Don't assume the ops in dw_pcie always exist PCI: dwc: Add upper limit address for outbound iATU PCI: dwc: Change size to u64 for EP outbound iATU PCI: dwc: Drop support for config space in 'ranges' PCI: layerscape: Convert to builtin_platform_driver() PCI: layerscape: Add LX2160A rev2 EP mode support dt-bindings: PCI: layerscape: Add LX2160A rev2 compatible strings PCI: dwc: Work around ECRC configuration issue PCI/portdrv: Report reset for frozen channel PCI/AER: Specify the type of Port that was reset PCI/ERR: Retain status from error notification PCI/AER: Clear AER status from Root Port when resetting Downstream Port PCI/ERR: Clear status of the reporting device dt-bindings: arm: rockchip: Add FriendlyARM NanoPi M4B PCI: rockchip: Make 'ep-gpios' DT property optional Documentation: PCI: Add PCI endpoint NTB function user guide ...
2021-02-24Merge branch 'remotes/lorenzo/pci/misc'Bjorn Helgaas
- Remove IRQ handler & data together for altera, brcmstb, dwc (Martin Kaiser) - Fix xgene race in installing chained IRQ handler (Martin Kaiser) - Drop PCIE_RCAR config option (replaced by PCIE_RCAR_HOST) (Lad Prabhakar) - Fix xgene comment about CRS vs CRS SV (Bjorn Helgaas) * remotes/lorenzo/pci/misc: PCI: hv: Fix typo PCI: xgene: Fix CRS SV comment PCI: brcmstb: Remove chained IRQ handler and data in one go PCI: Drop PCIE_RCAR config option PCI: xgene-msi: Fix race in installing chained irq handler PCI: dwc: Remove IRQ handler and data in one go PCI: altera-msi: Remove IRQ handler and data in one go
2021-02-24Merge branch 'remotes/lorenzo/pci/xilinx'Bjorn Helgaas
- Fix reference count leak on error path (Pan Bian) * remotes/lorenzo/pci/xilinx: PCI: xilinx-cpm: Fix reference count leak on error path
2021-02-24Merge branch 'remotes/lorenzo/pci/tango'Bjorn Helgaas
- Remove tango host controller driver (Arnd Bergmann) * remotes/lorenzo/pci/tango: PCI: Remove tango host controller driver # Conflicts: # drivers/pci/controller/Makefile
2021-02-24Merge branch 'pci/rockchip'Bjorn Helgaas
- Make 'ep-gpios' DT property optional (Chen-Yu Tsai) - Add FriendlyARM NanoPi M4B to rockchip DT binding (Chen-Yu Tsai) * pci/rockchip: dt-bindings: arm: rockchip: Add FriendlyARM NanoPi M4B PCI: rockchip: Make 'ep-gpios' DT property optional
2021-02-24Merge branch 'remotes/lorenzo/pci/rcar'Bjorn Helgaas
- Always allocate rcar MSI addresses in 32-bit space so legacy devices without 64-bit MSI support can use MSI (Marek Vasut) * remotes/lorenzo/pci/rcar: PCI: rcar: Always allocate MSI addresses in 32bit space
2021-02-24Merge branch 'pci/qcom'Bjorn Helgaas
- Add support for SM8250 PCIe SF TBU clock (Dmitry Baryshkov) - Use PHY_REFCLK_USE_PAD only for qcom ipq8064 (Ansuel Smith) * pci/qcom: PCI: qcom: Use PHY_REFCLK_USE_PAD only for ipq8064 PCI: qcom: Add support for ddrss_sf_tbu clock dt-bindings: PCI: qcom: Document ddrss_sf_tbu clock for sm8250
2021-02-24Merge branch 'pci/ntb'Bjorn Helgaas
- Account for 64-bit BARs in pci_epc_get_first_free_bar() (Kishon Vijay Abraham I) - Add pci_epc_get_next_free_bar() helper (Kishon Vijay Abraham I) - Return error codes on failure of endpoint BAR interfaces (Kishon Vijay Abraham I) - Remove unused pci_epf_match_device() (Kishon Vijay Abraham I) - Add support for secondary endpoint controller to prepare for NTB endpoint functionality (Kishon Vijay Abraham I) - Add configfs support for secondary endpoint controller (Kishon Vijay Abraham I) - Add MSI address mapping ops for NTB doorbell support (Kishon Vijay Abraham I) - Add ops for endpoint function-specific attributes (Kishon Vijay Abraham I) - Allow configfs subdirectory for endpoint function configuration (Kishon Vijay Abraham I) - Implement cadence MSI address mapping ops (Kishon Vijay Abraham I) - Configure cadence LM_EP_FUNC_CFG based on epc->function_num_map (Kishon Vijay Abraham I) - Add endpoint-side driver to provide NTB functionality (Kishon Vijay Abraham I) - Add host-side driver for generic EPF NTB functionality (Kishon Vijay Abraham I) - Document NTB endpoint functionality (Kishon Vijay Abraham I) * pci/ntb: Documentation: PCI: Add PCI endpoint NTB function user guide Documentation: PCI: Add configfs binding documentation for pci-ntb endpoint function NTB: Add support for EPF PCI Non-Transparent Bridge PCI: Add TI J721E device to PCI IDs PCI: endpoint: Add EP function driver to provide NTB functionality PCI: cadence: Configure LM_EP_FUNC_CFG based on epc->function_num_map PCI: cadence: Implement ->msi_map_irq() ops PCI: endpoint: Allow user to create sub-directory of 'EPF Device' directory PCI: endpoint: Add pci_epf_ops to expose function-specific attrs PCI: endpoint: Add pci_epc_ops to map MSI IRQ PCI: endpoint: Add support in configfs to associate two EPCs with EPF PCI: endpoint: Add support to associate secondary EPC with EPF PCI: endpoint: Remove unused pci_epf_match_device() PCI: endpoint: Make *_free_bar() to return error codes on failure PCI: endpoint: Add helper API to get the 'next' unreserved BAR PCI: endpoint: Make *_get_first_free_bar() take into account 64 bit BAR Documentation: PCI: Add specification for the PCI NTB function device
2021-02-24Merge branch 'pci/microchip'Bjorn Helgaas
- Call platform_set_drvdata() earlier so drivers can do window setup in init functions instead of custom probe (Daire McNamara) - Add DT binding and host mode driver for Microchip PolarFire PCIe controller (Daire McNamara) * pci/microchip: MAINTAINERS: Add Daire McNamara as Microchip PCIe driver maintainer PCI: microchip: Add Microchip PolarFire PCIe controller driver dt-bindings: PCI: microchip: Add Microchip PolarFire host binding PCI: Call platform_set_drvdata earlier in devm_pci_alloc_host_bridge
2021-02-24Merge branch 'remotes/lorenzo/pci/mediatek'Bjorn Helgaas
- Fix of_node_put() reference leak (Krzysztof Wilczyński) * remotes/lorenzo/pci/mediatek: PCI: mediatek: Add missing of_node_put() to fix reference leak
2021-02-24Merge branch 'pci/layerscape'Bjorn Helgaas
- Add Layerscape LX2160A rev2 endpoint mode support (Hou Zhiqiang) - Convert layerscape to builtin_platform_driver() (Michael Walle) * pci/layerscape: PCI: layerscape: Convert to builtin_platform_driver() PCI: layerscape: Add LX2160A rev2 EP mode support dt-bindings: PCI: layerscape: Add LX2160A rev2 compatible strings
2021-02-24Merge branch 'pci/dwc'Bjorn Helgaas
- Always set DesignWare "TLP Digest" bit so generic code can enable ECRC via the AER Capability (Vidya Sagar) - Drop support for config space in DT 'ranges' (Rob Herring) - Increase width of outbound iATU size to u64 (Shradha Todi) - Add upper limit address for outbound iATU (Shradha Todi) - Allow dwc-based drivers that don't override any default ops (Jisheng Zhang) - Drop unnecessary dw_pcie_ops from the al driver (Jisheng Zhang) * pci/dwc: PCI: al: Remove useless dw_pcie_ops PCI: dwc: Don't assume the ops in dw_pcie always exist PCI: dwc: Add upper limit address for outbound iATU PCI: dwc: Change size to u64 for EP outbound iATU PCI: dwc: Drop support for config space in 'ranges' PCI: dwc: Work around ECRC configuration issue
2021-02-24Merge branch 'remotes/lorenzo/pci/cadence'Bjorn Helgaas
- Retrain Link to work around Gen2 training defect (Nadeem Athani) * remotes/lorenzo/pci/cadence: PCI: cadence: Retrain Link to work around Gen2 training defect
2021-02-24Merge branch 'remotes/lorenzo/pci/brcmstb'Bjorn Helgaas
- Add support for BCM4908 with external PERST# signal controller (Rafał Miłecki) * remotes/lorenzo/pci/brcmstb: PCI: brcmstb: support BCM4908 with external PERST# signal controller dt-bindings: PCI: brcmstb: add BCM4908 binding
2021-02-24Merge branch 'pci/misc'Bjorn Helgaas
- Align checking of syscall user config accessor return codes (Heiner Kallweit) - Fix "ordering" comment typos (Bjorn Helgaas) - Fix 'ARM/TEXAS INSTRUMENT KEYSTONE CLOCKSOURCE' capitalization in MAINTAINERS (Bjorn Helgaas) - Add Silicom Denmark vendor ID (Martin Hundebøll) - Apply CONFIG_PCI_DEBUG to entire drivers/pci hierarchy (Junhao He) - Remove WARN_ON(in_interrupt()) (Sebastian Andrzej Siewior) * pci/misc: PCI: Remove WARN_ON(in_interrupt()) PCI: Apply CONFIG_PCI_DEBUG to entire drivers/pci hierarchy PCI: Add Silicom Denmark vendor ID MAINTAINERS: Fix 'ARM/TEXAS INSTRUMENT KEYSTONE CLOCKSOURCE' capitalization Fix "ordering" comment typos PCI: Align checking of syscall user config accessors
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-03 10:03:11 +0000