| Age | Commit message (Collapse) | Author |
|---|
|
Add "code" and "routing" into struct dw_pcie_ob_atu_cfg for triggering
INTx IRQs by iATU in the PCIe endpoint mode in near the future.
PCIE_ATU_INHIBIT_PAYLOAD is set to issue TLP type of Msg instead of
MsgD. This implementation supports the data-less messages only for now.
Link: https://lore.kernel.org/linux-pci/20240418-pme_msg-v8-3-a54265c39742@nxp.com
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
|
|
This is a preparation before adding the Msg-type outbound iATU
mapping. The respective update will require two more arguments added
to __dw_pcie_prog_outbound_atu(). That will make the already
complicated function prototype even more hard to comprehend accepting
_eight_ arguments.
To prevent that and keep the code more-or-less readable, move all the
outbound iATU-related arguments to a new config structure: struct
dw_pcie_ob_atu_cfg, and pass a pointer to dw_pcie_prog_outbound_atu(). The
structure should be locally defined and populated with the outbound iATU
settings implied by the caller context.
As a result of this change there is no longer need in having the two
distinctive methods for the Host and Endpoint outbound iATU setups since
the code can directly call the dw_pcie_prog_outbound_atu() method with the
config structure populated, so drop dw_pcie_prog_ep_outbound_atu().
[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20240418-pme_msg-v8-2-a54265c39742@nxp.com
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
|
|
When PERST# assert and deassert happens on the PERST# supported platforms,
both iATU0 and iATU6 will map inbound window to BAR0. DMA will access the
area that was previously allocated (iATU0) for BAR0, instead of the new
area (iATU6) for BAR0.
Right now, this isn't an issue because both iATU0 and iATU6 should
translate inbound accesses to BAR0 to the same allocated memory area.
However, having two separate inbound mappings for the same BAR is a
disaster waiting to happen.
The mappings between PCI BAR and iATU inbound window are maintained in the
dw_pcie_ep::bar_to_atu[] array. While allocating a new inbound iATU map for
a BAR, dw_pcie_ep_inbound_atu() API checks for the availability of the
existing mapping in the array and if it is not found (i.e., value in the
array indexed by the BAR is found to be 0), it allocates a new map value
using find_first_zero_bit().
The issue is the existing logic failed to consider the fact that the map
value '0' is a valid value for BAR0, so find_first_zero_bit() will return
'0' as the map value for BAR0 (note that it returns the first zero bit
position).
Due to this, when PERST# assert + deassert happens on the PERST# supported
platforms, the inbound window allocation restarts from BAR0 and the
existing logic to find the BAR mapping will return '6' for BAR0 instead of
'0' due to the fact that it considers '0' as an invalid map value.
Fix this issue by always incrementing the map value before assigning to
bar_to_atu[] array and then decrementing it while fetching. This will make
sure that the map value '0' always represents the invalid mapping."
Fixes: 4284c88fff0e ("PCI: designware-ep: Allow pci_epc_set_bar() update inbound map address")
Closes: https://lore.kernel.org/linux-pci/ZXsRp+Lzg3x%2Fnhk3@x1-carbon/
Link: https://lore.kernel.org/linux-pci/20240412160841.925927-1-Frank.Li@nxp.com
Reported-by: Niklas Cassel <Niklas.Cassel@wdc.com>
Tested-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
|
|
According to [1], msleep should be used for large sleeps, such as the
100-ish ms one in this function. Comply with the guide and use it.
[1] https://docs.kernel.org/timers/timers-howto.html
[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20240215-topic-pci_sleep-v2-1-79334884546b@linaro.org
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
The of_gpio.h legacy API is going to be removed. In preparation for that,
convert the driver to the agnostic API.
[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20240506142142.4042810-6-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
|
|
Convert loops in kirin_pcie_parse_port() to use the _scoped() version of
for_each_available_child_of_node() so the refcounts of children are
implicitly decremented when the loop is exited.
No functional change intended here, but it will make future error exits
from these loops easier.
Link: https://lore.kernel.org/linux-pci/20240609-pcie-kirin-memleak-v1-1-62b45b879576@gmail.com
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
[bhelgaas: move to GPIO series to avoid bisection hole, commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
QCOM Resource Power Manager-hardened (RPMh) is a hardware block which
maintains hardware state of a regulator by performing max aggregation of
the requests made by all of the clients.
PCIe controller can operate on different RPMh performance state of power
domain based on the speed of the link. And this performance state varies
from target to target, like some controllers support GEN3 in NOM (Nominal)
voltage corner, while some other supports GEN3 in low SVS (static voltage
scaling).
The SoC can be more power efficient if we scale the performance state
based on the aggregate PCIe link bandwidth.
Add Operating Performance Points (OPP) support to vote for RPMh state based
on the aggregate link bandwidth.
OPP can handle ICC bw voting also, so move ICC bw voting through OPP
framework if OPP entries are present.
As we are moving ICC voting as part of OPP, don't initialize ICC if OPP
is supported.
Before PCIe link is initialized vote for highest OPP in the OPP table,
so that we are voting for maximum voltage corner for the link to come up
in maximum supported speed.
Link: https://lore.kernel.org/linux-pci/20240619-opp_support-v15-4-aa769a2173a3@quicinc.com
Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
[bhelgaas: wrap comments to fit in 80 columns]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
Bring the switch case in pcie_link_speed_mbps() to new function to
the header file so that it can be used in other places like
in controller driver.
Link: https://lore.kernel.org/linux-pci/20240619-opp_support-v15-3-aa769a2173a3@quicinc.com
Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
To access the host controller registers of the host controller and the
endpoint BAR/config space, the CPU-PCIe ICC (interconnect) path should
be voted otherwise it may lead to NoC (Network on chip) timeout.
We are surviving because of other driver voting for this path.
As there is less access on this path compared to PCIe to mem path
add minimum vote i.e 1KBps bandwidth always which is sufficient enough
to keep the path active and is recommended by HW team.
During S2RAM (Suspend-to-RAM), the DBI access can happen very late (while
disabling the boot CPU). So do not disable the CPU-PCIe interconnect path
during S2RAM as that may lead to NoC error.
Link: https://lore.kernel.org/linux-pci/20240619-opp_support-v15-1-aa769a2173a3@quicinc.com
Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
All EP specific resources are enabled during PERST# deassert. As a counter
operation, all resources should be disabled during PERST# assert. There is
no point in skipping that if the link was not enabled.
This will also result in enablement of the resources twice if PERST# got
deasserted again. So remove the check from qcom_pcie_perst_assert() and
disable all the resources unconditionally.
Fixes: f55fee56a631 ("PCI: qcom-ep: Add Qualcomm PCIe Endpoint controller driver")
Link: https://lore.kernel.org/linux-pci/20240430-pci-epf-rework-v4-1-22832d0d456f@linaro.org
Tested-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
|
|
Due to some hardware changes, SA8775P has set the NO_SNOOP attribute
in its TLP for all the PCIe controllers. NO_SNOOP attribute when set,
the requester is indicating that no cache coherency issues exist for
the addressed memory on the host i.e., memory is not cached. But in
reality, requester cannot assume this unless there is a complete
control/visibility over the addressed memory on the host.
And worst case, if the memory is cached on the host, it may lead to
memory corruption issues. It should be noted that the caching of memory
on the host is not solely dependent on the NO_SNOOP attribute in TLP.
So to avoid the corruption, this patch overrides the NO_SNOOP attribute
by setting the PCIE_PARF_NO_SNOOP_OVERIDE register. This patch is not
needed for other upstream supported platforms since they do not set
NO_SNOOP attribute by default.
Link: https://lore.kernel.org/linux-pci/1710166298-27144-3-git-send-email-quic_msarkar@quicinc.com
Signed-off-by: Mrinmay Sarkar <quic_msarkar@quicinc.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
Due to some hardware changes, SA8775P has set the NO_SNOOP attribute
in its TLP for all the PCIe controllers. NO_SNOOP attribute when set,
the requester is indicating that no cache coherency issue exist for
the addressed memory on the endpoint i.e., memory is not cached. But
in reality, requester cannot assume this unless there is a complete
control/visibility over the addressed memory on the endpoint.
And worst case, if the memory is cached on the endpoint, it may lead to
memory corruption issues. It should be noted that the caching of memory
on the endpoint is not solely dependent on the NO_SNOOP attribute in TLP.
So to avoid the corruption, this patch overrides the NO_SNOOP attribute
by setting the PCIE_PARF_NO_SNOOP_OVERIDE register. This patch is not
needed for other upstream supported platforms since they do not set
NO_SNOOP attribute by default.
8775 has IP version 1.34.0 so introduce a new cfg(cfg_1_34_0) for this
platform. Assign override_no_snoop flag into struct qcom_pcie_cfg and
set it true in cfg_1_34_0 and enable cache snooping if this particular
flag is true.
Link: https://lore.kernel.org/linux-pci/1710166298-27144-2-git-send-email-quic_msarkar@quicinc.com
Signed-off-by: Mrinmay Sarkar <quic_msarkar@quicinc.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
[bhelgaas: wrap comments to fit in 80 columns]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
PCI devices and bridges DT nodes created during the PCI scan are created
with the interrupt-map property set to handle interrupts.
In order to set this interrupt-map property at a specific level, a
phandle to the parent interrupt controller is needed. On systems that
are not fully described by a device-tree, the parent interrupt
controller may be unavailable (i.e. not described by the device-tree).
As mentioned in the [1], avoiding the use of the interrupt-map property
and considering a PCI device as an interrupt controller itself avoid the
use of a parent interrupt phandle.
In that case, the PCI device itself as an interrupt controller is
responsible for routing the interrupts described in the device-tree
world (DT overlay) to the PCI interrupts.
Add the 'interrupt-controller' property in the PCI device DT node.
[1]: https://lore.kernel.org/lkml/CAL_Jsq+je7+9ATR=B6jXHjEJHjn24vQFs4Tvi9=vhDeK9n42Aw@mail.gmail.com/
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20240527161450.326615-18-herve.codina@bootlin.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
If of_platform_populate() is called when CONFIG_OF is not defined this
leads to spurious error messages of the following type:
pci 0000:00:01.1: failed to populate child OF nodes (-19)
pci 0000:00:02.1: failed to populate child OF nodes (-19)
Fixes: 8fb18619d910 ("PCI/pwrctl: Create platform devices for child OF nodes of the port node")
Signed-off-by: Bert Karwatzki <spasswolf@web.de>
Closes: https://lore.kernel.org/all/20240702173255.39932-1-superm1@kernel.org/
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Acked-by: Krzysztof Wilczyński <kw@linux.com>
Reported-by: Praveenkumar Patil <PraveenKumar.Patil@amd.com>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20240707183829.41519-1-spasswolf@web.de
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
When ARCH=x86, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/pci/controller/dwc/pci-exynos.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/pci/controller/pci-host-generic.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/pci/controller/pcie-altera.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/pci/controller/pcie-altera-msi.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/pci/controller/pcie-mediatek.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/pci/controller/pcie-mediatek-gen3.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/pci/controller/vmd.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/pci/controller/pcie-apple.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/pci/controller/pcie-mt7621.o
Add the missing MODULE_DESCRIPTION() macro.
[kwilczynski: update MODULE_DESCRIPTION() text, commit log]
Link: https://lore.kernel.org/linux-pci/20240626-md-drivers-pci-controller-v2-1-94c811db7a51@quicinc.com
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Nirmal Patel <nirmal.patel@linux.intel.com>
Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> # MT7621
|
|
When ARCH=x86, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/pci/pci-stub.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/pci/pci-pf-stub.o
Add the missing MODULE_DESCRIPTION() macro.
Link: https://lore.kernel.org/r/20240610-md-drivers-pci-v1-1-139c135853ea@quicinc.com
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
[bhelgaas: update MODULE_DESCRIPTION() text]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
|
|
There are two issues related to epf_ntb_epc_cleanup():
1) It should call epf_ntb_config_sspad_bar_clear()
2) The epf_ntb_bind() function should call epf_ntb_epc_cleanup()
to cleanup.
I also changed the ordering a bit. Unwinding should be done in the
mirror order from how they are allocated.
Fixes: e35f56bb0330 ("PCI: endpoint: Support NTB transfer between RC and EP")
Link: https://lore.kernel.org/linux-pci/aaffbe8d-7094-4083-8146-185f4a84e8a1@moroto.mountain
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Smatch complains about inconsistent NULL checking in vpci_scan_bus():
drivers/pci/endpoint/functions/pci-epf-vntb.c:1024 vpci_scan_bus() error: we previously assumed 'vpci_bus' could be null (see line 1021)
Instead of printing an error message and then crashing we should return
an error code and clean up.
Also the NULL check is reversed so it prints an error for success
instead of failure.
Fixes: e35f56bb0330 ("PCI: endpoint: Support NTB transfer between RC and EP")
Link: https://lore.kernel.org/linux-pci/68e0f6a4-fd57-45d0-945b-0876f2c8cb86@moroto.mountain
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Now that the driver core allows for struct class to be in read-only
memory, we should make all 'class' structures declared at build time
placing them into read-only memory, instead of having to be dynamically
allocated at runtime.
Link: https://lore.kernel.org/linux-pci/2024061011-citable-herbicide-1095@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
|
|
As like the 'epc_init' event, that is used to signal the EPF drivers about
the EPC initialization, let's introduce 'epc_deinit' event that is used to
signal EPC deinitialization.
The EPC deinitialization applies only when any sort of fundamental reset
is supported by the endpoint controller as per the PCIe spec.
Reference: PCIe r6.0, sec 4.2.5.9.1 and 6.6.1.
Currently, some EPC drivers like pcie-qcom-ep and pcie-tegra194 support
PERST# as the fundamental reset. So the 'deinit' event will be notified to
the EPF drivers when PERST# assert happens in the above mentioned EPC
drivers.
The EPF drivers, on receiving the event through the epc_deinit() callback
should reset the EPF state machine and also cleanup any configuration that
got affected by the fundamental reset like BAR, DMA etc...
This change also warrants skipping the cleanups in unbind() if already done
in epc_deinit().
Link: https://lore.kernel.org/r/20240606-pci-deinit-v1-2-4395534520dc@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
|
|
The hotplug driver for powerpc (pci/hotplug/pnv_php.c) causes a kernel
crash when we try to hot-unplug/disable the PCIe switch/bridge from
the PHB.
The crash occurs because although the MSI data structure has been
released during disable/hot-unplug path and it has been assigned
with NULL, still during unregistration the code was again trying to
explicitly disable the MSI which causes the NULL pointer dereference and
kernel crash.
The patch fixes the check during unregistration path to prevent invoking
pci_disable_msi/msix() since its data structure is already freed.
Reported-by: Timothy Pearson <tpearson@raptorengineering.com>
Closes: https://lore.kernel.org/all/1981605666.2142272.1703742465927.JavaMail.zimbra@raptorengineeringinc.com/
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Shawn Anastasio <sanastasio@raptorengineering.com>
Signed-off-by: Krishna Kumar <krishnak@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240701074513.94873-2-krishnak@linux.ibm.com
|
|
The intent of the code snippet is to always return 0 for both
PCI_INTERRUPT_LINE and PCI_INTERRUPT_PIN.
The check misses PCI_INTERRUPT_PIN. This patch fixes that.
This is discovered by this call in VFIO:
pci_read_config_byte(vdev->pdev, PCI_INTERRUPT_PIN, &pin);
The old code does not set *val to 0 because it misses the check for
PCI_INTERRUPT_PIN. Garbage is returned in that case.
Fixes: 4daace0d8ce8 ("PCI: hv: Add paravirtual PCI front-end for Microsoft Hyper-V VMs")
Link: https://lore.kernel.org/linux-pci/20240701202606.129606-1-wei.liu@kernel.org
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Cc: stable@kernel.org
|
|
In the match() callback, the struct device_driver * should not be
changed, so change the function callback to be a const *. This is one
step of many towards making the driver core safe to have struct
device_driver in read-only memory.
Because the match() callback is in all busses, all busses are modified
to handle this properly. This does entail switching some container_of()
calls to container_of_const() to properly handle the constant *.
For some busses, like PCI and USB and HV, the const * is cast away in
the match callback as those busses do want to modify those structures at
this point in time (they have a local lock in the driver structure.)
That will have to be changed in the future if they wish to have their
struct device * in read-only-memory.
Cc: Rafael J. Wysocki <rafael@kernel.org>
Reviewed-by: Alex Elder <elder@kernel.org>
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Link: https://lore.kernel.org/r/2024070136-wrongdoer-busily-01e8@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add support for r8a779g0 (R-Car V4H).
This driver previously supported r8a779f0 (R-Car S4-8). PCIe features
of both r8a779f0 and r8a779g0 are almost all the same. For example:
- PCI Express Base Specification Revision 4.0
- Root complex mode and endpoint mode are supported
However, r8a779g0 requires specific firmware to be provided, to
initialize the PHY. Otherwise, the PCIe controller will not work.
[kwilczynski: drop the proprietary firmware conversion comment]
Link: https://lore.kernel.org/linux-pci/20240611125057.1232873-5-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
Keith reports a use-after-free when a DPC event occurs concurrently to
hot-removal of the same portion of the hierarchy:
The dpc_handler() awaits readiness of the secondary bus below the
Downstream Port where the DPC event occurred. To do so, it polls the
config space of the first child device on the secondary bus. If that
child device is concurrently removed, accesses to its struct pci_dev
cause the kernel to oops.
That's because pci_bridge_wait_for_secondary_bus() neglects to hold a
reference on the child device. Before v6.3, the function was only
called on resume from system sleep or on runtime resume. Holding a
reference wasn't necessary back then because the pciehp IRQ thread
could never run concurrently. (On resume from system sleep, IRQs are
not enabled until after the resume_noirq phase. And runtime resume is
always awaited before a PCI device is removed.)
However starting with v6.3, pci_bridge_wait_for_secondary_bus() is also
called on a DPC event. Commit 53b54ad074de ("PCI/DPC: Await readiness
of secondary bus after reset"), which introduced that, failed to
appreciate that pci_bridge_wait_for_secondary_bus() now needs to hold a
reference on the child device because dpc_handler() and pciehp may
indeed run concurrently. The commit was backported to v5.10+ stable
kernels, so that's the oldest one affected.
Add the missing reference acquisition.
Abridged stack trace:
BUG: unable to handle page fault for address: 00000000091400c0
CPU: 15 PID: 2464 Comm: irq/53-pcie-dpc 6.9.0
RIP: pci_bus_read_config_dword+0x17/0x50
pci_dev_wait()
pci_bridge_wait_for_secondary_bus()
dpc_reset_link()
pcie_do_recovery()
dpc_handler()
Fixes: 53b54ad074de ("PCI/DPC: Await readiness of secondary bus after reset")
Closes: https://lore.kernel.org/r/20240612181625.3604512-3-kbusch@meta.com/
Link: https://lore.kernel.org/linux-pci/8e4bcd4116fd94f592f2bf2749f168099c480ddf.1718707743.git.lukas@wunner.de
Reported-by: Keith Busch <kbusch@kernel.org>
Tested-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: stable@vger.kernel.org # v5.10+
|
|
Sequence for controlling the LTSSM state machine is going to change
for SoCs like r8a779f0. Move the LTSSM code to a new callback
ltssm_control() and populate it for each SoCs.
This also warrants the addition of new compatibles for r8a779g0 and
r8a779h0. But since they are already part of the DT binding, it won't
make any difference.
Link: https://lore.kernel.org/linux-pci/20240611125057.1232873-4-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
In order to support future SoCs such as r8a779g0 (R-Car V4H) and
r8a779h0 (R-Car V4M) that require different initialization settings,
introduce SoC specific driver data with the initial member being the
device mode.
No functional change.
[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20240611125057.1232873-3-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
R-Car Gen4 PCIe controller needs to use the Synopsys-specific PCIe
configuration registers. So, add the macros.
Link: https://lore.kernel.org/linux-pci/20240611125057.1232873-2-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
Errata #i2037 in AM65x/DRA80xM Processors Silicon Revision 1.0
(SPRZ452D_July 2018_Revised December 2019 [1]) mentions when an
inbound PCIe TLP spans more than two internal AXI 128-byte bursts,
the bus may corrupt the packet payload and the corrupt data may
cause associated applications or the processor to hang.
The workaround for Errata #i2037 is to limit the maximum read
request size and maximum payload size to 128 bytes. Add workaround
for Errata #i2037 here.
The errata and workaround is applicable only to AM65x SR 1.0 and
later versions of the silicon will have this fixed.
[1] -> https://www.ti.com/lit/er/sprz452i/sprz452i.pdf
Link: https://lore.kernel.org/linux-pci/16e1fcae-1ea7-46be-b157-096e05661b15@siemens.com
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Achal Verma <a-verma1@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
|
|
The struct mobiveil_rp_ops is not modified in this driver.
Thus, make this struct constant, which also moves data to a read-only
section decreasing object size and also improving overall security.
On a x86_64, with allmodconfig, as an example:
Before:
======
text data bss dec hex filename
4446 336 32 4814 12ce drivers/pci/controller/mobiveil/pcie-layerscape-gen4.o
After:
=====
text data bss dec hex filename
4454 328 32 4814 12ce drivers/pci/controller/mobiveil/pcie-layerscape-gen4.o
[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/189fd881cc8fd80220e74e91820e12cf3a5be114.1719260294.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
|
|
KFENCE reports the following UAF:
BUG: KFENCE: use-after-free read in __pci_enable_msi_range+0x2c0/0x488
Use-after-free read at 0x0000000024629571 (in kfence-#12):
__pci_enable_msi_range+0x2c0/0x488
pci_alloc_irq_vectors_affinity+0xec/0x14c
pci_alloc_irq_vectors+0x18/0x28
kfence-#12: 0x0000000008614900-0x00000000e06c228d, size=104, cache=kmalloc-128
allocated by task 81 on cpu 7 at 10.808142s:
__kmem_cache_alloc_node+0x1f0/0x2bc
kmalloc_trace+0x44/0x138
msi_alloc_desc+0x3c/0x9c
msi_domain_insert_msi_desc+0x30/0x78
msi_setup_msi_desc+0x13c/0x184
__pci_enable_msi_range+0x258/0x488
pci_alloc_irq_vectors_affinity+0xec/0x14c
pci_alloc_irq_vectors+0x18/0x28
freed by task 81 on cpu 7 at 10.811436s:
msi_domain_free_descs+0xd4/0x10c
msi_domain_free_locked.part.0+0xc0/0x1d8
msi_domain_alloc_irqs_all_locked+0xb4/0xbc
pci_msi_setup_msi_irqs+0x30/0x4c
__pci_enable_msi_range+0x2a8/0x488
pci_alloc_irq_vectors_affinity+0xec/0x14c
pci_alloc_irq_vectors+0x18/0x28
Descriptor allocation done in:
__pci_enable_msi_range
msi_capability_init
msi_setup_msi_desc
msi_insert_msi_desc
msi_domain_insert_msi_desc
msi_alloc_desc
...
Freed in case of failure in __msi_domain_alloc_locked()
__pci_enable_msi_range
msi_capability_init
pci_msi_setup_msi_irqs
msi_domain_alloc_irqs_all_locked
msi_domain_alloc_locked
__msi_domain_alloc_locked => fails
msi_domain_free_locked
...
That failure propagates back to pci_msi_setup_msi_irqs() in
msi_capability_init() which accesses the descriptor for unmasking in the
error exit path.
Cure it by copying the descriptor and using the copy for the error exit path
unmask operation.
[ tglx: Massaged change log ]
Fixes: bf6e054e0e3f ("genirq/msi: Provide msi_device_populate/destroy_sysfs()")
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Bjorn Heelgas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240624203729.1094506-1-smostafa@google.com
|
|
If the link is powered off during suspend, electrical noise may cause
errors that trigger DPC. If the DPC interrupt is enabled and shares an IRQ
with PME, that causes a spurious wakeup during suspend.
Disable DPC triggering and the DPC interrupt during suspend to prevent
this. Clear DPC interrupt status before re-enabling DPC interrupts during
resume so we don't get an interrupt for errors that occurred during the
suspend/resume process.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=209149
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216295
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218090
Link: https://lore.kernel.org/r/20240416043225.1462548-3-kai.heng.feng@canonical.com
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
[bhelgaas: clear status on resume, add comments, commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
If the link is powered off during suspend, electrical noise may cause
errors that are logged via AER. If the AER interrupt is enabled and shares
an IRQ with PME, that causes a spurious wakeup during suspend.
Disable the AER interrupt during suspend to prevent this. Clear error
status before re-enabling IRQ interrupts during resume so we don't get an
interrupt for errors that occurred during the suspend/resume process.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=209149
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216295
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218090
Link: https://lore.kernel.org/r/20240416043225.1462548-2-kai.heng.feng@canonical.com
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
[bhelgaas: drop pci_ancestor_pr3_present() etc, commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
With ARCH=arm64, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/pci/hotplug/acpiphp_ampere_altra.o
Add the missing MODULE_DESCRIPTION().
Link: https://lore.kernel.org/r/20240612-md-drivers-pci-hotplug-v1-1-2b30d14d783d@quicinc.com
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
During remove & rescan cycle, PCI subsystem will recalculate and adjust
the bridge window sizing that was initially done by "BIOS". The size
calculation is based on the required alignment of the largest resource
among the downstream resources as per pbus_size_mem() (unimportant or
zero parameters marked with "..."):
min_align = calculate_mem_align(aligns, max_order);
size0 = calculate_memsize(size, ..., min_align);
inside calculate_memsize(), for the largest alignment:
min_align = align1 >> 1;
...
return min_align;
and then in calculate_memsize():
return ALIGN(max(size, ...), align);
If the original bridge window sizing tried to conserve space, this will
lead to massive increase of the required bridge window size when the
downstream has a large disparity in BAR sizes. E.g., with 16MiB and
16GiB BARs this results in 24GiB bridge window size even if 16MiB BAR
does not require gigabytes of space to fit.
When doing remove & rescan for a bus that contains such a PCI device, a
larger bridge window is suddenly required on rescan but when there is a
bridge window upstream that is already assigned based on the original
size, it cannot be enlarged to the new requirement. This causes the
allocation of the bridge window to fail (0x600000000 > 0x400ffffff):
pci 0000:02:01.0: PCI bridge to [bus 03]
pci 0000:02:01.0: bridge window [mem 0x40400000-0x405fffff]
pci 0000:02:01.0: bridge window [mem 0x6000000000-0x6400ffffff 64bit pref]
pci 0000:01:00.0: PCI bridge to [bus 02-04]
pci 0000:01:00.0: bridge window [mem 0x40400000-0x406fffff]
pci 0000:01:00.0: bridge window [mem 0x6000000000-0x6400ffffff 64bit pref]
pci 0000:03:00.0: device released
pci 0000:02:01.0: device released
pcieport 0000:01:00.0: scanning [bus 02-04] behind bridge, pass 0
pci 0000:02:01.0: PCI bridge to [bus 03]
pci 0000:02:01.0: bridge window [mem 0x40400000-0x405fffff]
pci 0000:02:01.0: bridge window [mem 0x6000000000-0x6400ffffff 64bit pref]
pci 0000:02:01.0: scanning [bus 03-03] behind bridge, pass 0
pci 0000:03:00.0: BAR 0 [mem 0x6400000000-0x6400ffffff 64bit pref]
pci 0000:03:00.0: BAR 2 [mem 0x6000000000-0x63ffffffff 64bit pref]
pci 0000:03:00.0: ROM [mem 0x40400000-0x405fffff pref]
pci 0000:02:01.0: PCI bridge to [bus 03]
pci 0000:02:01.0: scanning [bus 03-03] behind bridge, pass 1
pcieport 0000:01:00.0: scanning [bus 02-04] behind bridge, pass 1
pci 0000:02:01.0: bridge window [mem size 0x600000000 64bit pref]: can't assign; no space
pci 0000:02:01.0: bridge window [mem size 0x600000000 64bit pref]: failed to assign
pci 0000:02:01.0: bridge window [mem 0x40400000-0x405fffff]: assigned
pci 0000:03:00.0: BAR 2 [mem size 0x400000000 64bit pref]: can't assign; no space
pci 0000:03:00.0: BAR 2 [mem size 0x400000000 64bit pref]: failed to assign
pci 0000:03:00.0: BAR 0 [mem size 0x01000000 64bit pref]: can't assign; no space
pci 0000:03:00.0: BAR 0 [mem size 0x01000000 64bit pref]: failed to assign
pci 0000:03:00.0: ROM [mem 0x40400000-0x405fffff pref]: assigned
pci 0000:02:01.0: PCI bridge to [bus 03]
pci 0000:02:01.0: bridge window [mem 0x40400000-0x405fffff]
This is a major surprise for users who are suddenly left with a device that
was working fine with the original bridge window sizing.
Even if the already assigned bridge window could be enlarged by
reallocation in some cases (something the current code does not attempt
to do), it is not possible in general case and the large amount of
wasted space at the tail of the bridge window may lead to other
resource exhaustion problems on Root Complex level (think of multiple
PCIe cards with VFs and BAR size disparity in a single system).
PCI BARs only need natural alignment (PCIe r6.1, sec 7.5.1.2.1) and bridge
memory windows need 1MiB (sec 7.5.1.3). The current bridge window tail
alignment rule was introduced in the commit 5d0a8965aea9 ("[PATCH] 2.5.14:
New PCI allocation code (alpha, arm, parisc) [2/2]") that only states:
"pbus_size_mem: core stuff; tested with randomly generated sets of
resources". It does not explain the motivation for the extra tail space
allocated that is not truly needed by the downstream resources. As such, it
is far from clear if it ever has been required by any HW.
To prevent devices with BAR size disparity from becoming unusable after
remove & rescan cycle, attempt to do a truly minimal allocation for memory
resources if needed. First check if the normally calculated bridge window
will not fit into an already assigned upstream resource. In such case, try
with relaxed bridge window tail sizing rules instead where no extra tail
space is requested beyond what the downstream resources require. Only
enforce the alignment requirement of the bridge window itself (normally
1MiB).
With this patch, the resources are successfully allocated:
pci 0000:02:01.0: PCI bridge to [bus 03]
pci 0000:02:01.0: scanning [bus 03-03] behind bridge, pass 1
pcieport 0000:01:00.0: scanning [bus 02-04] behind bridge, pass 1
pcieport 0000:01:00.0: Assigned bridge window [mem 0x6000000000-0x6400ffffff 64bit pref] to [bus 02-04] cannot fit 0x600000000 required for 0000:02:01.0 bridging to [bus 03]
pci 0000:02:01.0: bridge window [mem 0x6000000000-0x6400ffffff 64bit pref] to [bus 03] requires relaxed alignment rules
pcieport 0000:01:00.0: Assigned bridge window [mem 0x40400000-0x406fffff] to [bus 02-04] free space at [mem 0x40400000-0x405fffff]
pci 0000:02:01.0: bridge window [mem 0x6000000000-0x6400ffffff 64bit pref]: assigned
pci 0000:02:01.0: bridge window [mem 0x40400000-0x405fffff]: assigned
pci 0000:03:00.0: BAR 2 [mem 0x6000000000-0x63ffffffff 64bit pref]: assigned
pci 0000:03:00.0: BAR 0 [mem 0x6400000000-0x6400ffffff 64bit pref]: assigned
pci 0000:03:00.0: ROM [mem 0x40400000-0x405fffff pref]: assigned
pci 0000:02:01.0: PCI bridge to [bus 03]
pci 0000:02:01.0: bridge window [mem 0x40400000-0x405fffff]
pci 0000:02:01.0: bridge window [mem 0x6000000000-0x6400ffffff 64bit pref]
This patch draws inspiration from the initial investigations and work by
Mika Westerberg.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=216795
Link: https://lore.kernel.org/linux-pci/20190812144144.2646-1-mika.westerberg@linux.intel.com/
Fixes: 5d0a8965aea9 ("[PATCH] 2.5.14: New PCI allocation code (alpha, arm, parisc) [2/2]")
Link: https://lore.kernel.org/r/20240507102523.57320-9-ilpo.jarvinen@linux.intel.com
Tested-by: Lidong Wang <lidong.wang@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Calculations related to bridge window size contain literal 20 that is the
minimum alignment for a bridge window. Make the code more obvious by
converting the literal 20 to __ffs(SZ_1M).
Link: https://lore.kernel.org/r/20240507102523.57320-8-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
[bhelgaas: squash https://lore.kernel.org/r/20240612093250.17544-1-ilpo.jarvinen@linux.intel.com]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Add a PCI power control driver that's capable of correctly powering up
devices using the power sequencing subsystem. The first users of this
driver are the ath11k module on QCA6390 and ath12k on WCN7850. These
packages require a certain delay between enabling the Bluetooth and WLAN
modules and the power sequencing subsystem takes care of it behind the
scenes.
Tested-by: Amit Pundir <amit.pundir@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD, SM8650-QRD & SM8650-HDK
Tested-by: Caleb Connolly <caleb.connolly@linaro.org> # OnePlus 8T
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20240612082019.19161-6-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Some PCI devices must be powered-on before they can be detected on the
bus. Introduce a simple framework reusing the existing PCI OF
infrastructure.
The way this works is: a DT node representing a PCI device connected to
the port can be matched against its power control platform driver. If
the match succeeds, the driver is responsible for powering-up the device
and calling pci_pwrctl_device_set_ready() which will trigger a PCI bus
rescan as well as subscribe to PCI bus notifications.
When the device is detected and created, we'll make it consume the same
DT node that the platform device did. When the device is bound, we'll
create a device link between it and the parent power control device.
Tested-by: Amit Pundir <amit.pundir@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD, SM8650-QRD & SM8650-HDK
Tested-by: Caleb Connolly <caleb.connolly@linaro.org> # OnePlus 8T
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20240612082019.19161-5-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
In preparation for introducing PCI device power control - a set of
library functions that will allow powering-up of PCI devices before
they're detected on the PCI bus - we need to populate the devices
defined on the device-tree.
We are reusing the platform bus as it provides us with all the
infrastructure we need to match the pwrctl drivers against the
compatibles from OF nodes.
These platform devices will be probed by the driver core and bound to
the PCI pwrctl drivers we'll introduce later.
Tested-by: Amit Pundir <amit.pundir@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD, SM8650-QRD & SM8650-HDK
Tested-by: Caleb Connolly <caleb.connolly@linaro.org> # OnePlus 8T
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20240612082019.19161-4-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
With PCI power control we deal with two struct device objects bound to
two different drivers but consuming the same OF node. We must not bind
the pinctrl twice. To that end: before setting the OF node of the newly
instantiated PCI device, check if a platform device consuming the same
OF node doesn't already exist on the platform bus and - if so - mark the
PCI device as reusing the OF node.
Tested-by: Amit Pundir <amit.pundir@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD, SM8650-QRD & SM8650-HDK
Tested-by: Caleb Connolly <caleb.connolly@linaro.org> # OnePlus 8T
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20240612082019.19161-3-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
With the introduction of PCI device power control drivers that will be
able to trigger the port rescan when probing, we need to hold the rescan
mutex during the initial pci_host_probe() too or the two could get in
each other's way.
Tested-by: Amit Pundir <amit.pundir@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD, SM8650-QRD & SM8650-HDK
Tested-by: Caleb Connolly <caleb.connolly@linaro.org> # OnePlus 8T
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20240612082019.19161-2-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
New CPU #defines encode vendor and family as well as model.
Link: https://lore.kernel.org/r/20240611172816.352828-1-tony.luck@intel.com
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Now that the driver core allows for struct class to be in read-only memory,
we should make all 'class' structures declared at build time placing them
into read-only memory, instead of having to be dynamically allocated at
runtime.
Link: https://lore.kernel.org/r/2024061053-online-unwound-b173@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-By: Logan Gunthorpe <logang@deltatee.com>
Cc: Kurt Schwemmer <kurt.schwemmer@microsemi.com>
Cc: Jon Mason <jdmason@kudzu.us>
Cc: Allen Hubbe <allenbh@gmail.com>
|
|
While 'x' and '&x[0]' are equivalent, most of the PCI drivers use the
former form for the .id_table.
Update some drivers and documentation for consistency.
Link: https://lore.kernel.org/r/20240517120458.1260489-1-masahiroy@kernel.org
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
'tegra_pcie_soc' has been unused since 56e15a238d92 ("PCI: tegra: Add
Tegra194 PCIe support"). Remove it.
Link: https://lore.kernel.org/r/20240527160118.37069-1-linux@treblig.org
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
|
|
The recent adventure with adding lockdep tracking for cfg_access_lock,
while it yielded many false positives [1], did catch a true positive in the
pci_reset_bus() path [2].
So, while lockdep is difficult to deploy, open coding a check that
cfg_access_lock is held during the reset is feasible.
While this does not offer a full backtrace, it should be sufficient to
implicate the caller of pci_bridge_secondary_bus_reset() as a path that
needs investigation.
Link: https://lore.kernel.org/r/171711746953.1628941.4692125082286867825.stgit@dwillia2-xfh.jf.intel.com
Link: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_134186v1/shard-dg2-1/igt@device_reset@unbind-reset-rebind.html [1]
Link: http://lore.kernel.org/r/cfb50601-5d2a-4676-a958-1bd3f1b06654@intel.com [2]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Kalle Valo <kvalo@kernel.org>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
|
|
While the experiment did reveal that there are additional places that are
missing the lock during secondary bus reset, one of the places that needs
to take cfg_access_lock (pci_bus_lock()) is not prepared for lockdep
annotation.
Specifically, pci_bus_lock() takes pci_dev_lock() recursively and is
currently dependent on the fact that the device_lock() is marked
lockdep_set_novalidate_class(&dev->mutex). Otherwise, without that
annotation, pci_bus_lock() would need to use something like a new
pci_dev_lock_nested() helper, a scheme to track a PCI device's depth in the
topology, and a hope that the depth of a PCI tree never exceeds the max
value for a lockdep subclass.
The alternative to ripping out the lockdep coverage would be to deploy a
dynamic lock key for every PCI device. Unfortunately, there is evidence
that increasing the number of keys that lockdep needs to track to be
per-PCI-device is prohibitively expensive for something like the
cfg_access_lock.
The main motivation for adding the annotation in the first place was to
catch unlocked secondary bus resets, not necessarily catch lock ordering
problems between cfg_access_lock and other locks. Solve that narrower
problem with follow-on patches, and just due to targeted revert for now.
Link: https://lore.kernel.org/r/171711746402.1628941.14575335981264103013.stgit@dwillia2-xfh.jf.intel.com
Fixes: 7e89efc6e9e4 ("PCI: Lock upstream bridge for pci_reset_function()")
Reported-by: Imre Deak <imre.deak@intel.com>
Closes: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_134186v1/shard-dg2-1/igt@device_reset@unbind-reset-rebind.html
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Kalle Valo <kvalo@kernel.org>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Cc: Jani Saarinen <jani.saarinen@intel.com>
|
|
Use preserve_config in place of checking for PCI_PROBE_ONLY flag to enable
support for "linux,pci-probe-only" on a per host bridge basis.
This also obviates the use of adding PCI_REASSIGN_ALL_BUS flag if
!PCI_PROBE_ONLY, as pci_assign_unassigned_root_bus_resources() takes care
of reassigning the resources that are not already claimed.
Link: https://lore.kernel.org/r/20240508174138.3630283-5-vidyas@nvidia.com
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Unify the 'preserve config' support across ACPI and device-tree
boot flows.
Link: https://lore.kernel.org/r/20240508174138.3630283-4-vidyas@nvidia.com
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Add of_pci_preserve_config() to look for the "linux,pci-probe-only"
property under a specified node. If it's not found there, look under
"of_chosen" in addition.
If the caller didn't specify a node, look under "of_chosen".
With a future patch, this will support "linux,pci-probe-only" on a per host
bridge basis based on the presence of the property in the respective PCI
host bridge DT node.
Implement of_pci_check_probe_only() using of_pci_preserve_config().
Link: https://lore.kernel.org/r/20240508174138.3630283-3-vidyas@nvidia.com
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
