| Age | Commit message (Collapse) | Author |
|---|
|
Header file linux/pci_ids.h defines AMCC vendor id (0x10e8) macro named
PCI_VENDOR_ID_AMCC. So use this macro instead of driver custom macro.
Link: https://lore.kernel.org/r/20210927134356.11799-1-pali@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Krzysztof Wilczyński <kw@linux.com>
|
|
If the clock is provided externally we need to make sure it is enabled
before starting PCI scan.
Link: https://lore.kernel.org/r/20210531085934.2662457-5-luca@lucaceresoli.net
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
|
|
Unused since commit e259c2926c01 ("PCI: pci-dra7xx: Prepare for deferred
probe with module_platform_driver").
Link: https://lore.kernel.org/r/20210531085934.2662457-4-luca@lucaceresoli.net
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
|
|
Enable building the driver as a loadable kernel module.
Link: https://lore.kernel.org/r/20210531085934.2662457-3-luca@lucaceresoli.net
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
|
|
These symbols are used by the pci-dra7xx driver. Export them to allow
building pci-dra7xx as a module.
Link: https://lore.kernel.org/r/20210531085934.2662457-2-luca@lucaceresoli.net
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
|
|
Built-in graphics at 07:00.0 on HP EliteDesk 805 G6 doesn't work because
graphics can't get the BAR it needs. The BIOS configuration is
correct: BARs 0 and 2 both fit in the 00:08.1 bridge window.
But that 00:08.1 window covers two host bridge apertures from _CRS.
Previously we assumed this was illegal, so we clipped the window to fit
into one aperture (see 0f7e7aee2f37 ("PCI: Add pci_bus_clip_resource() to
clip to fit upstream window")).
pci_bus 0000:00: root bus resource [mem 0x10020200000-0x100303fffff window]
pci_bus 0000:00: root bus resource [mem 0x10030400000-0x100401fffff window]
pci 0000:00:08.1: bridge window [mem 0x10030000000-0x100401fffff 64bit pref]
pci 0000:07:00.0: reg 0x10: [mem 0x10030000000-0x1003fffffff 64bit pref]
pci 0000:07:00.0: reg 0x18: [mem 0x10040000000-0x100401fffff 64bit pref]
pci 0000:00:08.1: can't claim BAR 15 [mem 0x10030000000-0x100401fffff 64bit pref]: no compatible bridge window
pci 0000:00:08.1: [mem 0x10030000000-0x100401fffff 64bit pref] clipped to [mem 0x10030000000-0x100303fffff 64bit pref]
pci 0000:00:08.1: bridge window [mem 0x10030000000-0x100303fffff 64bit pref]
pci 0000:07:00.0: can't claim BAR 0 [mem 0x10030000000-0x1003fffffff 64bit pref]: no compatible bridge window
pci 0000:07:00.0: can't claim BAR 2 [mem 0x10040000000-0x100401fffff 64bit pref]: no compatible bridge window
However, the host bridge apertures are contiguous, so there's no need to
clip in this case. Coalesce contiguous apertures so we can allocate from
the entire contiguous region.
Previous commit 65db04053efe ("PCI: Coalesce host bridge contiguous
apertures") was similar but sorted the apertures, and Guenter Roeck
reported a regression in ppc:sam460ex qemu emulation from nvme; see
https://lore.kernel.org/all/20210709231529.GA3270116@roeck-us.net/
[bhelgaas: commit log]
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=212013
Suggested-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20210713125007.1260304-1-kai.heng.feng@canonical.com
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Guenter Roeck <linux@roeck-us.net>
|
|
Using struct pci_platform_pm_ops for ACPI adds unnecessary
indirection to the interactions between the PCI core and ACPI PM,
which is also subject to retpolines.
Moreover, it is not particularly clear from the current code that,
as far as PCI PM is concerned, "platform" really means just ACPI
except for the special casess when Intel MID PCI PM is used or when
ACPI support is disabled (through the kernel config or command line,
or because there are no usable ACPI tables on the system).
To address the above, rework the PCI PM code to invoke ACPI PM
functions directly as needed and drop the acpi_pci_platform_pm
object that is not necessary any more.
Accordingly, update some of the ACPI PM functions in question to do
extra checks in case the ACPI support is disabled (which previously
was taken care of by avoiding to set the pci_platform_ops pointer
in those cases).
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Ferry Toth <fntoth@gmail.com>
|
|
strtobool() is a wrapper around kstrtobool() that has been added for
backward compatibility.
There is no reason to use the old API, so use kstrtobool() directly.
Related: ef951599074b ("lib: move strtobool() to kstrtobool()")
Link: https://lore.kernel.org/r/20210915230127.2495723-3-kw@linux.com
Signed-off-by: Krzysztof Wilczyński <kw@linux.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Most of the "store" functions that handle userspace input via sysfs return
-EINVAL should the value fail validation and/or type conversion. This
error code is a clear message to userspace that the value is not a valid
input.
However, some of the "show" functions return input parsing error codes
as-is, which may be either -EINVAL or -ERANGE. The former would often be
from kstrtobool(), and the latter typically from other kstr*() functions
such as kstrtou8(), kstrtou32(), kstrtoint(), etc.
-EINVAL is commonly returned as the error code to indicate that the value
provided is invalid, but -ERANGE is not very useful in userspace.
Therefore, normalize the return error code to be -EINVAL for when the
validation and/or type conversion fails.
Link: https://lore.kernel.org/r/20210915230127.2495723-2-kw@linux.com
Signed-off-by: Krzysztof Wilczyński <kw@linux.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Check if the "CAP_SYS_ADMIN" capability flag is set before parsing user
input as it makes more sense to first check whether the current user
actually has the right permissions before accepting any input from such
user.
This will also make order in which enable_store() and msi_bus_store()
perform the "CAP_SYS_ADMIN" capability check consistent with other
PCI-related sysfs objects that first verify whether user has this
capability set.
Link: https://lore.kernel.org/r/20210915230127.2495723-1-kw@linux.com
Signed-off-by: Krzysztof Wilczyński <kw@linux.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Make comments follow multi-line comment conventions. No functional change
intended.
Link: https://lore.kernel.org/r/YUZJenW2UCA4Qu0O@pranay-desktop
Signed-off-by: Pranay Sanghai <pranaysanghai@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
There are only two users of struct pci_platform_pm_ops in the tree,
one of which is Intel MID PM and the other one is ACPI. They are
mutually exclusive and the MID PM should take precedence when they
both are enabled, but whether or not this really is the case hinges
on the specific ordering of arch_initcall() calls made by them.
The struct pci_platform_pm_ops abstraction is not really necessary
for just these two users, but it adds complexity and overhead because
of retoplines involved in using all of the function pointers in there.
It also makes following the code a bit more difficult than it would
be otherwise.
Moreover, Intel MID PCI PM doesn't even implement the majority of the
function pointers in struct pci_platform_pm_ops in a meaningful way,
so switch over the PCI core to calling the relevant MID PM routines,
mid_pci_set_power_state() and mid_pci_set_power_state(), directly as
needed and drop mid_pci_platform_pm.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Ferry Toth <fntoth@gmail.com>
|
|
The acpi_pci_bus structure was used primarily for running
acpi_pci_find_companion() during PCI device objects registration,
but after commit 375553a93201 ("PCI: Setup ACPI fwnode early and at
the same time with OF") that function is called by pci_setup_device()
via pci_set_acpi_fwnode(), which happens before calling
pci_device_add() on the new PCI device object, so its ACPI companion
has been set already when acpi_device_notify() runs and it will never
call ->find_companion() from acpi_pci_bus.
For this reason, modify acpi_device_notify() and
acpi_device_notify_remove() to call pci_acpi_setup() and
pci_acpi_cleanup(), respectively, directly on PCI device objects
and drop acpi_pci_bus altogether.
While at it, notice that pci_acpi_setup() and pci_acpi_cleanup()
can obtain the ACPI companion pointer, which is guaranteed to not
be NULL, from their callers and modify them to work that way so
as to reduce the number of redundant checks somewhat.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Ferry Toth <fntoth@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"Some minor cleanups and fixes of some theoretical bugs, as well as a
fix of a bug introduced in 5.15-rc1"
* tag 'for-linus-5.15b-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/x86: fix PV trap handling on secondary processors
xen/balloon: fix balloon kthread freezing
swiotlb-xen: this is PV-only on x86
xen/pci-swiotlb: reduce visibility of symbols
PCI: only build xen-pcifront in PV-enabled environments
swiotlb-xen: ensure to issue well-formed XENMEM_exchange requests
Xen/gntdev: don't ignore kernel unmapping error
xen/x86: drop redundant zeroing from cpu_initialize_context()
|
|
from the bus
In hv_pci_bus_exit, the code is holding a spinlock while calling
pci_destroy_slot(), which takes a mutex.
This is not safe for spinlock. Fix this by moving the children to be
deleted to a list on the stack, and removing them after spinlock is
released.
Fixes: 94d22763207a ("PCI: hv: Fix a race condition when removing the device")
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Wei Liu <wei.liu@kernel.org>
Cc: Dexuan Cui <decui@microsoft.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Rob Herring <robh@kernel.org>
Cc: "Krzysztof Wilczyński" <kw@linux.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Michael Kelley <mikelley@microsoft.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/linux-hyperv/20210823152130.GA21501@kili/
Signed-off-by: Long Li <longli@microsoft.com>
Reviewed-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/1630365207-20616-1-git-send-email-longli@linuxonhyperv.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
The general convention for pcibios_* hooks is that they're named after the
corresponding pci_* function they provide a hook for. The exception is
pcibios_add_device() which provides a hook for pci_device_add().
Rename pcibios_add_device() to pcibios_device_add() so it matches
pci_device_add().
Also, remove the export of the microblaze version. The only caller must be
compiled as a built-in so there's no reason for the export.
Link: https://lore.kernel.org/r/20210913152709.48013-1-oohall@gmail.com
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Niklas Schnelle <schnelle@linux.ibm.com> # s390
|
|
Avoid registering service IRQs if there is no service that offers them
or no driver to register a handler against them. This saves IRQ vectors
when they are limited (e.g. on x86) and also avoids that spurious events
could hit a missing handler. Such spurious events need to be generated
by the Jailhouse hypervisor for active MSI vectors when enabling or
disabling itself.
Link: https://lore.kernel.org/r/8f9a13ac-8ab1-15ac-06cb-c131b488a36f@siemens.com
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
When passing the Atheros QCA6174 through to a virtual machine, the VM hangs
at the point where the ath10k driver loads.
Add a quirk to avoid bus resets on this device, which avoids the hang.
[bhelgaas: commit log]
Link: https://lore.kernel.org/r/08982e05-b6e8-5a8d-24ab-da1488ee50a8@web.de
Signed-off-by: Ingmar Klein <ingmar_klein@web.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Pali Rohár <pali@kernel.org>
Cc: stable@vger.kernel.org
|
|
The bus offset is bus address - physical address, so the calculation in
__pci_p2pdma_map_sg should be: bus address = physical address + bus offset.
Correct the dma_address computation in __pci_p2pdma_map_sg().
Link: https://lore.kernel.org/r/20210909032528.24517-1-wanglu@dapustor.com
Signed-off-by: Wang Lu <wanglu@dapustor.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
|
|
The driver's module init function, pcifront_init(), invokes
xen_pv_domain() first thing. That construct produces constant "false"
when !CONFIG_XEN_PV. Hence there's no point building the driver in
non-PV configurations.
Drop the (now implicit and generally wrong) X86 dependency: At present,
XEN_PV can only be set when X86 is also enabled. In general an
architecture supporting Xen PV (and PCI) would want to have this driver
built.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/3a7f6c9b-215d-b593-8056-b5fe605dafd7@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Some AMD GPUs have built-in USB xHCI and USB Type-C UCSI controllers with
power dependencies between the GPU and the other functions as in
6d2e369f0d4c ("PCI: Add NVIDIA GPU multi-function power dependencies").
Add device link support for the AMD integrated USB xHCI and USB Type-C UCSI
controllers.
Without this, runtime power management, including GPU resume and temp and
fan sensors don't work correctly.
Reported-at: https://gitlab.freedesktop.org/drm/amd/-/issues/1704
Link: https://lore.kernel.org/r/20210903063311.3606226-1-evan.quan@amd.com
Signed-off-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
|
|
Commit 375553a93201 ("PCI: Setup ACPI fwnode early and at the same time
with OF") added a call to pci_set_acpi_fwnode() in pci_setup_device(),
which unconditionally clears any fwnode previously set by
pci_set_of_node().
pci_set_acpi_fwnode() looks for ACPI_COMPANION(), which only returns the
existing fwnode if it was set by ACPI_COMPANION_SET(). If it was set by
OF instead, ACPI_COMPANION() returns NULL and pci_set_acpi_fwnode()
accidentally clears the fwnode. To fix this, look for any fwnode instead
of just ACPI companions.
Fixes a virtio-iommu boot regression in v5.15-rc1.
Fixes: 375553a93201 ("PCI: Setup ACPI fwnode early and at the same time with OF")
Link: https://lore.kernel.org/r/20210913172358.1775381-1-jean-philippe@linaro.org
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
7bac54497c3e ("PCI/VPD: Determine VPD size in pci_vpd_init()") reads VPD at
enumeration-time to find the size. But this is quite slow, and we don't
need the size until we actually need data from VPD. Dave reported a boot
slowdown of more than two minutes [1].
Defer the VPD sizing until a driver or the user (via sysfs) requests
information from VPD.
If devices are quirked because VPD is known not to work, don't bother even
looking for the VPD capability. The VPD will not be accessible at all.
[1] https://lore.kernel.org/r/20210913141818.GA27911@codemonkey.org.uk/
Link: https://lore.kernel.org/r/20210914215543.GA1437800@bjorn-Precision-5520
Fixes: 7bac54497c3e ("PCI/VPD: Determine VPD size in pci_vpd_init()")
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI updates from Rafael Wysocki:
"These add ACPI support to the PCI VMD driver, improve suspend-to-idle
support for AMD platforms and update documentation.
Specifics:
- Add ACPI support to the PCI VMD driver (Rafael Wysocki)
- Rearrange suspend-to-idle support code to reflect the platform
firmware expectations on some AMD platforms (Mario Limonciello)
- Make SSDT overlays documentation follow the code documented by it
more closely (Andy Shevchenko)"
* tag 'acpi-5.15-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: PM: s2idle: Run both AMD and Microsoft methods if both are supported
Documentation: ACPI: Align the SSDT overlays file with the code
PCI: VMD: ACPI: Make ACPI companion lookup work for VMD bus
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Convert controller drivers to generic_handle_domain_irq() (Marc
Zyngier)
- Simplify VPD (Vital Product Data) access and search (Heiner
Kallweit)
- Update bnx2, bnx2x, bnxt, cxgb4, cxlflash, sfc, tg3 drivers to use
simplified VPD interfaces (Heiner Kallweit)
- Run Max Payload Size quirks before configuring MPS; work around
ASMedia ASM1062 SATA MPS issue (Marek Behún)
Resource management:
- Refactor pci_ioremap_bar() and pci_ioremap_wc_bar() (Krzysztof
Wilczyński)
- Optimize pci_resource_len() to reduce kernel size (Zhen Lei)
PCI device hotplug:
- Fix a double unmap in ibmphp (Vishal Aslot)
PCIe port driver:
- Enable Bandwidth Notification only if port supports it (Stuart
Hayes)
Sysfs/proc/syscalls:
- Add schedule point in proc_bus_pci_read() (Krzysztof Wilczyński)
- Return ~0 data on pciconfig_read() CAP_SYS_ADMIN failure (Krzysztof
Wilczyński)
- Return "int" from pciconfig_read() syscall (Krzysztof Wilczyński)
Virtualization:
- Extend "pci=noats" to also turn on Translation Blocking to protect
against some DMA attacks (Alex Williamson)
- Add sysfs mechanism to control the type of reset used between
device assignments to VMs (Amey Narkhede)
- Add support for ACPI _RST reset method (Shanker Donthineni)
- Add ACS quirks for Cavium multi-function devices (George Cherian)
- Add ACS quirks for NXP LX2xx0 and LX2xx2 platforms (Wasim Khan)
- Allow HiSilicon AMBA devices that appear as fake PCI devices to use
PASID and SVA (Zhangfei Gao)
Endpoint framework:
- Add support for SR-IOV Endpoint devices (Kishon Vijay Abraham I)
- Zero-initialize endpoint test tool parameters so we don't use
random parameters (Shunyong Yang)
APM X-Gene PCIe controller driver:
- Remove redundant dev_err() call in xgene_msi_probe() (ErKun Yang)
Broadcom iProc PCIe controller driver:
- Don't fail devm_pci_alloc_host_bridge() on missing 'ranges' because
it's optional on BCMA devices (Rob Herring)
- Fix BCMA probe resource handling (Rob Herring)
Cadence PCIe driver:
- Work around J7200 Link training electrical issue by increasing
delays in LTSSM (Nadeem Athani)
Intel IXP4xx PCI controller driver:
- Depend on ARCH_IXP4XX to avoid useless config questions (Geert
Uytterhoeven)
Intel Keembay PCIe controller driver:
- Add Intel Keem Bay PCIe controller (Srikanth Thokala)
Marvell Aardvark PCIe controller driver:
- Work around config space completion handling issues (Evan Wang)
- Increase timeout for config access completions (Pali Rohár)
- Emulate CRS Software Visibility bit (Pali Rohár)
- Configure resources from DT 'ranges' property to fix I/O space
access (Pali Rohár)
- Serialize INTx mask/unmask (Pali Rohár)
MediaTek PCIe controller driver:
- Add MT7629 support in DT (Chuanjia Liu)
- Fix an MSI issue (Chuanjia Liu)
- Get syscon regmap ("mediatek,generic-pciecfg"), IRQ number
("pci_irq"), PCI domain ("linux,pci-domain") from DT properties if
present (Chuanjia Liu)
Microsoft Hyper-V host bridge driver:
- Add ARM64 support (Boqun Feng)
- Support "Create Interrupt v3" message (Sunil Muthuswamy)
NVIDIA Tegra PCIe controller driver:
- Use seq_puts(), move err_msg from stack to static, fix OF node leak
(Christophe JAILLET)
NVIDIA Tegra194 PCIe driver:
- Disable suspend when in Endpoint mode (Om Prakash Singh)
- Fix MSI-X address programming error (Om Prakash Singh)
- Disable interrupts during suspend to avoid spurious AER link down
(Om Prakash Singh)
Renesas R-Car PCIe controller driver:
- Work around hardware issue that prevents Link L1->L0 transition
(Marek Vasut)
- Fix runtime PM refcount leak (Dinghao Liu)
Rockchip DesignWare PCIe controller driver:
- Add Rockchip RK356X host controller driver (Simon Xue)
TI J721E PCIe driver:
- Add support for J7200 and AM64 (Kishon Vijay Abraham I)
Toshiba Visconti PCIe controller driver:
- Add Toshiba Visconti PCIe host controller driver (Nobuhiro
Iwamatsu)
Xilinx NWL PCIe controller driver:
- Enable PCIe reference clock via CCF (Hyun Kwon)
Miscellaneous:
- Convert sta2x11 from 'pci_' to 'dma_' API (Christophe JAILLET)
- Fix pci_dev_str_match_path() alloc while atomic bug (used for
kernel parameters that specify devices) (Dan Carpenter)
- Remove pointless Precision Time Management warning when PTM is
present but not enabled (Jakub Kicinski)
- Remove surplus "break" statements (Krzysztof Wilczyński)"
* tag 'pci-v5.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (132 commits)
PCI: ibmphp: Fix double unmap of io_mem
x86/PCI: sta2x11: switch from 'pci_' to 'dma_' API
PCI/VPD: Use unaligned access helpers
PCI/VPD: Clean up public VPD defines and inline functions
cxgb4: Use pci_vpd_find_id_string() to find VPD ID string
PCI/VPD: Add pci_vpd_find_id_string()
PCI/VPD: Include post-processing in pci_vpd_find_tag()
PCI/VPD: Stop exporting pci_vpd_find_info_keyword()
PCI/VPD: Stop exporting pci_vpd_find_tag()
PCI: Set dma-can-stall for HiSilicon chips
PCI: rockchip-dwc: Add Rockchip RK356X host controller driver
PCI: dwc: Remove surplus break statement after return
PCI: artpec6: Remove local code block from switch statement
PCI: artpec6: Remove surplus break statement after return
MAINTAINERS: Add entries for Toshiba Visconti PCIe controller
PCI: visconti: Add Toshiba Visconti PCIe host controller driver
PCI/portdrv: Enable Bandwidth Notification only if port supports it
PCI: Allow PASID on fake PCIe devices without TLP prefixes
PCI: mediatek: Use PCI domain to handle ports detection
PCI: mediatek: Add new method to get irq number
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb
Pull swiotlb updates from Konrad Rzeszutek Wilk:
"A new feature called restricted DMA pools. It allows SWIOTLB to
utilize per-device (or per-platform) allocated memory pools instead of
using the global one.
The first big user of this is ARM Confidential Computing where the
memory for DMA operations can be set per platform"
* 'stable/for-linus-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb: (23 commits)
swiotlb: use depends on for DMA_RESTRICTED_POOL
of: restricted dma: Don't fail device probe on rmem init failure
of: Move of_dma_set_restricted_buffer() into device.c
powerpc/svm: Don't issue ultracalls if !mem_encrypt_active()
s390/pv: fix the forcing of the swiotlb
swiotlb: Free tbl memory in swiotlb_exit()
swiotlb: Emit diagnostic in swiotlb_exit()
swiotlb: Convert io_default_tlb_mem to static allocation
of: Return success from of_dma_set_restricted_buffer() when !OF_ADDRESS
swiotlb: add overflow checks to swiotlb_bounce
swiotlb: fix implicit debugfs declarations
of: Add plumbing for restricted DMA pool
dt-bindings: of: Add restricted DMA pool
swiotlb: Add restricted DMA pool initialization
swiotlb: Add restricted DMA alloc/free support
swiotlb: Refactor swiotlb_tbl_unmap_single
swiotlb: Move alloc_size to swiotlb_find_slots
swiotlb: Use is_swiotlb_force_bounce for swiotlb data bouncing
swiotlb: Update is_swiotlb_active to add a struct device argument
swiotlb: Update is_swiotlb_buffer to add a struct device argument
...
|
|
Pull VFIO updates from Alex Williamson:
- Fix dma-valid return WAITED implementation (Anthony Yznaga)
- SPDX license cleanups (Cai Huoqing)
- Split vfio-pci-core from vfio-pci and enhance PCI driver matching to
support future vendor provided vfio-pci variants (Yishai Hadas, Max
Gurtovoy, Jason Gunthorpe)
- Replace duplicated reflck with core support for managing first open,
last close, and device sets (Jason Gunthorpe, Max Gurtovoy, Yishai
Hadas)
- Fix non-modular mdev support and don't nag about request callback
support (Christoph Hellwig)
- Add semaphore to protect instruction intercept handler and replace
open-coded locks in vfio-ap driver (Tony Krowiak)
- Convert vfio-ap to vfio_register_group_dev() API (Jason Gunthorpe)
* tag 'vfio-v5.15-rc1' of git://github.com/awilliam/linux-vfio: (37 commits)
vfio/pci: Introduce vfio_pci_core.ko
vfio: Use kconfig if XX/endif blocks instead of repeating 'depends on'
vfio: Use select for eventfd
PCI / VFIO: Add 'override_only' support for VFIO PCI sub system
PCI: Add 'override_only' field to struct pci_device_id
vfio/pci: Move module parameters to vfio_pci.c
vfio/pci: Move igd initialization to vfio_pci.c
vfio/pci: Split the pci_driver code out of vfio_pci_core.c
vfio/pci: Include vfio header in vfio_pci_core.h
vfio/pci: Rename ops functions to fit core namings
vfio/pci: Rename vfio_pci_device to vfio_pci_core_device
vfio/pci: Rename vfio_pci_private.h to vfio_pci_core.h
vfio/pci: Rename vfio_pci.c to vfio_pci_core.c
vfio/ap_ops: Convert to use vfio_register_group_dev()
s390/vfio-ap: replace open coded locks for VFIO_GROUP_NOTIFY_SET_KVM notification
s390/vfio-ap: r/w lock for PQAP interception handler function pointer
vfio/type1: Fix vfio_find_dma_valid return
vfio-pci/zdev: Remove repeated verbose license text
vfio: platform: reset: Convert to SPDX identifier
vfio: Remove struct vfio_device_ops open/release
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross:
- some small cleanups
- a fix for a bug when running as Xen PV guest which could result in
not all memory being transferred in case of a migration of the guest
- a small series for getting rid of code for supporting very old Xen
hypervisor versions nobody should be using since many years now
- a series for hardening the Xen block frontend driver
- a fix for Xen PV boot code issuing warning messages due to a stray
preempt_disable() on the non-boot processors
* tag 'for-linus-5.15-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: remove stray preempt_disable() from PV AP startup code
xen/pcifront: Removed unnecessary __ref annotation
x86: xen: platform-pci-unplug: use pr_err() and pr_warn() instead of raw printk()
drivers/xen/xenbus/xenbus_client.c: fix bugon.cocci warnings
xen/blkfront: don't trust the backend response data blindly
xen/blkfront: don't take local copy of a request from the ring page
xen/blkfront: read response from backend only once
xen: assume XENFEAT_gnttab_map_avail_bits being set for pv guests
xen: assume XENFEAT_mmu_pt_update_preserve_ad being set for pv guests
xen: check required Xen features
xen: fix setting of max_pfn in shared_info
|
|
- Make ixp4xx driver depend on ARCH_IXP4XX (Geert Uytterhoeven)
* remotes/lorenzo/pci/misc:
PCI: controller: PCI_IXP4XX should depend on ARCH_IXP4XX
|
|
- Add max-virtual-functions to endpoint binding (Kishon Vijay Abraham I)
- Add pci_epf_add_vepf() API to add virtual function to endpoint (Kishon
Vijay Abraham I)
- Add pci_epf_vepf_link() to link virtual function to endpoint physical
function (Kishon Vijay Abraham I)
- Add virtual function number to pci_epc_ops endpoint ops interfaces
(Kishon Vijay Abraham I)
- Simplify register base address computation for endpoint BAR configuration
(Kishon Vijay Abraham I)
- Add support to configure virtual functions in cadence endpoint driver
(Kishon Vijay Abraham I)
- Add SR-IOV configuration to endpoint test driver (Kishon Vijay Abraham I)
- Document configfs usage to create virtual functions for endpoints (Kishon
Vijay Abraham I)
* remotes/lorenzo/pci/endpoint:
Documentation: PCI: endpoint/pci-endpoint-cfs: Guide to use SR-IOV
misc: pci_endpoint_test: Populate sriov_configure ops to configure SR-IOV device
PCI: cadence: Add support to configure virtual functions
PCI: cadence: Simplify code to get register base address for configuring BAR
PCI: endpoint: Add virtual function number in pci_epc ops
PCI: endpoint: Add support to link a physical function to a virtual function
PCI: endpoint: Add support to add virtual function in endpoint core
dt-bindings: PCI: pci-ep: Add binding to specify virtual function
|
|
- Document optional clock DT property (Michal Simek)
- Enable PCIe ref clock (Hyun Kwon)
* remotes/lorenzo/pci/xilinx-nwl:
PCI: xilinx-nwl: Enable the clock through CCF
dt-bindings: pci: xilinx-nwl: Document optional clock property
|
|
- Remove redundant dev_err() after devm_ioremap_resource() (ErKun Yang)
* remotes/lorenzo/pci/xgene:
PCI: xgene-msi: Remove redundant dev_err() call in xgene_msi_probe()
|
|
- Fix handling BME_CHGED event (Om Prakash Singh)
- Fix MSI-X programming (Om Prakash Singh)
- Disable interrupts before entering L2 (Om Prakash Singh)
- Don't allow suspend when Tegra PCIe is in EP mode (Om Prakash Singh)
* remotes/lorenzo/pci/tegra194:
PCI: tegra194: Cleanup unused code
PCI: tegra194: Don't allow suspend when Tegra PCIe is in EP mode
PCI: tegra194: Disable interrupts before entering L2
PCI: tegra194: Fix MSI-X programming
PCI: tegra194: Fix handling BME_CHGED event
|
|
- Remove unused struct tegra_pcie_bus (Krzysztof Wilczyński)
* remotes/lorenzo/pci/tegra:
PCI: tegra: make const array err_msg static
PCI: tegra: Use 'seq_puts' instead of 'seq_printf'
PCI: tegra: Fix OF node reference leak
PCI: tegra: Remove unused struct tegra_pcie_bus
|
|
- Fix runtime PM imbalance in rcar_pcie_ep_probe() (Dinghao Liu)
* remotes/lorenzo/pci/rcar:
PCI: rcar: Add L1 link state fix into data abort hook
PCI: rcar: Fix runtime PM imbalance in rcar_pcie_ep_probe()
|
|
- Split DT bindings for PCIe controllers with independent MSI domains into
separate nodes for MT2712/MT7622 (Chuanjia Liu)
- Locate shared registers from "mediatek,generic-pciecfg" property
(Chuanjia Liu)
- Get IRQ from "pcie_irq" if "interrupt-names" property is present to fix
an MSI issue (Chuanjia Liu)
- Get PCI domain from "linux,pci-domain" property if present (Chuanjia Liu)
* remotes/lorenzo/pci/mediatek:
PCI: mediatek: Use PCI domain to handle ports detection
PCI: mediatek: Add new method to get irq number
PCI: mediatek: Add new method to get shared pcie-cfg base address
dt-bindings: PCI: mediatek: Update the Device tree bindings
|
|
- Add Intel Keem Bay PCIe controller driver and DT binding (Srikanth
Thokala)
* remotes/lorenzo/pci/keembay:
PCI: keembay: Add support for Intel Keem Bay
dt-bindings: PCI: Add Intel Keem Bay PCIe controller
|
|
- Don't fail devm_pci_alloc_host_bridge() on missing 'ranges' (Rob Herring)
- Fix BCMA probe resource handling (Rob Herring)
* remotes/lorenzo/pci/iproc:
PCI: iproc: Fix BCMA probe resource handling
PCI: of: Don't fail devm_pci_alloc_host_bridge() on missing 'ranges'
|
|
- Add domain_nr in struct pci_host_bridge (Boqun Feng)
- Use host bridge MSI domain for root buses if present (Boqun Feng)
- Allow ARM64 virtual host bridge with no ACPI companion (e.g., Hyper-V)
(Boqun Feng)
- Make Hyper-V enumeration more generic (Arnd Bergmann)
- Set Hyper-V domain_nr at probe-time (Boqun Feng)
- Set up Hyper-V MSI domain at bridge probe-time (Boqun Feng)
- Enable Hyper-V bridge probing on ARM64 (Boqun Feng)
* remotes/lorenzo/pci/hyper-v:
PCI: hv: Turn on the host bridge probing on ARM64
PCI: hv: Set up MSI domain at bridge probing time
PCI: hv: Set ->domain_nr of pci_host_bridge at probing time
PCI: hv: Generify PCI probing
arm64: PCI: Support root bridge preparation for Hyper-V
arm64: PCI: Restructure pcibios_root_bridge_prepare()
PCI: Support populating MSI domains of root buses via bridges
PCI: Introduce domain_nr in pci_host_bridge
|
|
- Support Hyper-V Create Interrupt v3 message (Sunil Muthuswamy)
* remotes/lorenzo/pci/hv:
PCI: hv: Support for create interrupt v3
|
|
- Convert bool in structs to bitfield (Kishon Vijay Abraham I)
- Work around J7200 non-PCIe SERDES lane electrical issue that prevents
PCIe link training (Nadeem Athani)
- Add J7200 PCIe support to j721e (Kishon Vijay Abraham I)
- Add AM64 PCIe support to j721e (Kishon Vijay Abraham I)
- Add J7200 and AM64 device IDs to endpoint test (Kishon Vijay Abraham I)
* remotes/lorenzo/pci/cadence:
misc: pci_endpoint_test: Add deviceID for AM64 and J7200
PCI: j721e: Add PCIe support for AM64
PCI: j721e: Add PCIe support for J7200
PCI: cadence: Add quirk flag to set minimum delay in LTSSM Detect.Quiet state
PCI: cadence: Use bitfield for *quirk_retrain_flag* instead of bool
|
|
- Fix PIO config access status checking (Evan Wang)
- Increase config access polling delay to 1.5s (Pali Rohár)
- Add PCIe Root Capabilities to bridge emulation (Pali Rohár)
- Report Config Request Retry Status when Software Visibility enabled (Pali
Rohár)
- Add back configuration of PCIe resources from 'ranges' DT property and
pay attention to DT size and CPU/PCI offset to fix issues with I/O port
space (Pali Rohár)
- Serialize masking and unmasking legacy INTx interrupts (Pali Rohár)
* remotes/lorenzo/pci/aardvark:
PCI: aardvark: Fix masking and unmasking legacy INTx interrupts
PCI: aardvark: Configure PCIe resources from 'ranges' DT property
PCI: aardvark: Fix reporting CRS value
PCI: pci-bridge-emul: Add PCIe Root Capabilities Register
PCI: aardvark: Increase polling delay to 1.5s while waiting for PIO response
PCI: aardvark: Fix checking for PIO status
|
|
- Add Toshiba Visconti PCIe host controller driver (Nobuhiro Iwamatsu)
* pci/visconti:
MAINTAINERS: Add entries for Toshiba Visconti PCIe controller
PCI: visconti: Add Toshiba Visconti PCIe host controller driver
|
|
- Add Rockchip RK356X host controller driver (Simon Xue)
* pci/rockchip-dwc:
PCI: rockchip-dwc: Add Rockchip RK356X host controller driver
|
|
- Remove surplus break statement (Krzysztof Wilczyński)
* pci/dwc:
PCI: dwc: Remove surplus break statement after return
|
|
- Remove surplus break statement and local code block (Krzysztof
Wilczyński)
* pci/artpec6:
PCI: artpec6: Remove local code block from switch statement
PCI: artpec6: Remove surplus break statement after return
|
|
- Add pci_numachip_init() declaration (Krzysztof Wilczyński)
- Allocate pci_dev_str_match_path() string atomically (Dan Carpenter)
- Drop error message when Precision Time Measurement supported but not
enabled (Jakub Kicinski)
- Correct the pci_iomap.h header guard #endif comment (Jonathan Cameron)
- Add schedule point in proc_bus_pci_read() (Krzysztof Wilczyński)
- Make saved capability state private to core (Bjorn Helgaas)
- Sync __pci_register_driver() stub for CONFIG_PCI=n (Andy Shevchenko)
- Convert sta2x11 from PCI-DMA-API to generic DMA-API (Christophe JAILLET)
* pci/misc:
x86/PCI: sta2x11: switch from 'pci_' to 'dma_' API
PCI: Sync __pci_register_driver() stub for CONFIG_PCI=n
PCI: Make saved capability state private to core
PCI: Add schedule point in proc_bus_pci_read()
PCI: Correct the pci_iomap.h header guard #endif comment
PCI/PTM: Remove error message at boot
PCI: Fix pci_dev_str_match_path() alloc while atomic bug
x86/PCI: Add pci_numachip_init() declaration
# Conflicts:
# include/linux/pci.h
|
|
- Check Resource Item Names against those defined for type (Bjorn Helgaas)
- Treat initial 0xff as missing EEPROM (Heiner Kallweit)
- Reject resource tags with invalid size (Bjorn Helgaas)
- Don't check Large Resource Item Names for validity (Bjorn Helgaas)
- Allow access to valid parts of VPD if some is invalid (Bjorn Helgaas)
- Remove pci_vpd_size() old_size argument (Heiner Kallweit)
- Make pci_vpd_wait() uninterruptible (Heiner Kallweit)
- Remove struct pci_vpd.flag (Heiner Kallweit)
- Remove struct pci_vpd_ops (Heiner Kallweit)
- Remove struct pci_vpd.valid member (Heiner Kallweit)
- Embed struct pci_vpd in struct pci_dev (Heiner Kallweit)
- Determine VPD size in pci_vpd_init() (Heiner Kallweit)
- Treat invalid VPD like missing VPD capability (Heiner Kallweit)
- Add pci_vpd_alloc() to allocate buffer and read VPD into it (Heiner
Kallweit)
- Add pci_vpd_find_ro_info_keyword() (Heiner Kallweit)
- Add pci_vpd_check_csum() (Heiner Kallweit)
- Add pci_vpd_find_id_string() (Heiner Kallweit)
- Read VPD with pci_vpd_alloc() (bnx2x, bnxt, sfc, sfc falcon, tg3 drivers)
(Heiner Kallweit)
- Search VPD with pci_vpd_find_ro_info_keyword() (bnx2, bnx2x, bnxt, cxgb4,
cxlflash SCSI, sfc, sfc falcon, tg3 drivers) (Heiner Kallweit)
- Search VPD with pci_vpd_find_id_string() (cxgb4 driver) (Heiner Kallweit)
- Validate VPD checksum with pci_vpd_check_csum() (cxgb4, tg3 drivers)
(Heiner Kallweit)
- Replace open-coded byte swapping with swab32s() in bnx2 (Heiner Kallweit)
- Remove unused vpd_param member ec (Heiner Kallweit)
- Stop exporting pci_vpd_find_tag(), pci_vpd_find_info_keyword() (Heiner
Kallweit)
- Move several VPD defines and inlines to internal PCI core (Heiner
Kallweit)
* pci/vpd:
PCI/VPD: Use unaligned access helpers
PCI/VPD: Clean up public VPD defines and inline functions
cxgb4: Use pci_vpd_find_id_string() to find VPD ID string
PCI/VPD: Add pci_vpd_find_id_string()
PCI/VPD: Include post-processing in pci_vpd_find_tag()
PCI/VPD: Stop exporting pci_vpd_find_info_keyword()
PCI/VPD: Stop exporting pci_vpd_find_tag()
scsi: cxlflash: Search VPD with pci_vpd_find_ro_info_keyword()
cxgb4: Search VPD with pci_vpd_find_ro_info_keyword()
cxgb4: Remove unused vpd_param member ec
cxgb4: Validate VPD checksum with pci_vpd_check_csum()
bnxt: Search VPD with pci_vpd_find_ro_info_keyword()
bnxt: Read VPD with pci_vpd_alloc()
bnx2x: Search VPD with pci_vpd_find_ro_info_keyword()
bnx2x: Read VPD with pci_vpd_alloc()
bnx2: Replace open-coded byte swapping with swab32s()
bnx2: Search VPD with pci_vpd_find_ro_info_keyword()
sfc: falcon: Search VPD with pci_vpd_find_ro_info_keyword()
sfc: falcon: Read VPD with pci_vpd_alloc()
tg3: Search VPD with pci_vpd_find_ro_info_keyword()
tg3: Validate VPD checksum with pci_vpd_check_csum()
tg3: Read VPD with pci_vpd_alloc()
sfc: Search VPD with pci_vpd_find_ro_info_keyword()
sfc: Read VPD with pci_vpd_alloc()
PCI/VPD: Add pci_vpd_check_csum()
PCI/VPD: Add pci_vpd_find_ro_info_keyword()
PCI/VPD: Add pci_vpd_alloc()
PCI/VPD: Treat invalid VPD like missing VPD capability
PCI/VPD: Determine VPD size in pci_vpd_init()
PCI/VPD: Embed struct pci_vpd in struct pci_dev
PCI/VPD: Remove struct pci_vpd.valid member
PCI/VPD: Remove struct pci_vpd_ops
PCI/VPD: Reorder pci_read_vpd(), pci_write_vpd()
PCI/VPD: Remove struct pci_vpd.flag
PCI/VPD: Make pci_vpd_wait() uninterruptible
PCI/VPD: Remove pci_vpd_size() old_size argument
PCI/VPD: Allow access to valid parts of VPD if some is invalid
PCI/VPD: Don't check Large Resource Item Names for validity
PCI/VPD: Reject resource tags with invalid size
PCI/VPD: Treat initial 0xff as missing EEPROM
PCI/VPD: Check Resource Item Names against those valid for type
PCI/VPD: Correct diagnostic for VPD read failure
|
|
- Add ACS quirks for NXP LX2xx0 and LX2xx2 platforms (Wasim Khan)
- Add ACS quirks for Cavium multi-function devices (George Cherian)
- Enforce pci=noats with Transaction Blocking (Alex Williamson)
* pci/virtualization:
PCI/ACS: Enforce pci=noats with Transaction Blocking
PCI: Add ACS quirks for Cavium multi-function devices
PCI: Add ACS quirks for NXP LX2xx0 and LX2xx2 platforms
|
|
- Refactor pci_ioremap_bar() and pci_ioremap_wc_bar() (Krzysztof
Wilczyński)
- Optimize pci_resource_len() to reduce kernel size (Zhen Lei)
* pci/resource:
PCI: Optimize pci_resource_len() to reduce kernel size
PCI: Refactor pci_ioremap_bar() and pci_ioremap_wc_bar()
|
