| Age | Commit message (Collapse) | Author |
|---|
|
- Add DT and driver support for SC8280XP/SA8540P basic interconnects where
interconnect bandwidth must be requested before enabling interconnect
clocks (Johan Hovold)
- Add 'dma-coherent' property (Johan Hovold)
* remotes/lorenzo/pci/qcom:
dt-bindings: PCI: qcom: Allow 'dma-coherent' property
PCI: qcom: Add basic interconnect support
dt-bindings: PCI: qcom: Add SC8280XP/SA8540P interconnects
|
|
- Add sentinel to mt7621_pcie_quirks_match[] to prevent oops when parsing
the table (John Thomson)
* remotes/lorenzo/pci/mt7621:
PCI: mt7621: Add sentinel to quirks table
|
|
- Add a .release() callback for the Endpoint Controller library so an
Endpoint driver is removable (Yoshihiro Shimoda)
- Fix pci-epf-vntb kernel-doc and whitespace (Frank Li)
- Fix pci-epf-vntb error path usage of pci_epc_mem_free_addr() (Frank Li)
- Remove pci-epf-vntb unused epf_db_phy (Frank Li)
- Fix pci-epf-vntb sparse warnings (Frank Li)
* remotes/lorenzo/pci/endpoint:
PCI: endpoint: pci-epf-vntb: Fix sparse ntb->reg build warning
PCI: endpoint: pci-epf-vntb: Fix sparse build warning for epf_db
PCI: endpoint: pci-epf-vntb: Replace hardcoded 4 with sizeof(u32)
PCI: endpoint: pci-epf-vntb: Remove unused epf_db_phy struct member
PCI: endpoint: pci-epf-vntb: Fix call pci_epc_mem_free_addr() in error path
PCI: endpoint: pci-epf-vntb: Fix struct epf_ntb_ctrl indentation
PCI: endpoint: pci-epf-vntb: Clean up kernel_doc warning
PCI: endpoint: Fix WARN() when an endpoint driver is removed
|
|
- Fix n_fts[] array overrun (Vidya Sagar)
- Don't advertise PTM Responder role for Endpoints (Vidya Sagar)
- Fix qcom "reset assert" error message (Manivannan Sadhasivam)
- Downgrade "link didn't come up" message to dev_info (Vidya Sagar)
- Initialize PHY before deasserting core reset so the link comes up on
boards where the PHY provides the reference clock (this was a regression
in v6.0) (Sascha Hauer)
- Switch histb to the gpiod API (Dmitry Torokhov)
- Fix imx6sx and imx8mq clock names in DT binding (Serge Semin)
- Fix visconti MSI interrupt in DT binding (Serge Semin)
- Consolidate reset-gpio, cdm, windows info in common DT shared by both
Root Port and Endpoint bindings (Serge Semin)
- Remove bus node from DT examples (Serge Semin)
- Add common phys, phy-names to DT (Serge Semin)
- Add default max-link-speed of Gen5 to DT (Serge Semin)
- Apply generic schema for generic device (Serge Semin)
- Add default max-functions of 32 to DT (Serge Semin)
- Add common interrupts, interrupt-names to DT (Serge Semin)
- Add common regs, reg-names to DT (Serge Semin)
- Add common clocks, resets to DT (Serge Semin)
- Add dma-coherent to DT (Serge Semin)
- Apply common schema to Rockchip DT (Serge Semin)
- Add Baikal-T1 DT bindings (Serge Semin)
- Add dma-ranges support in DesignWare core (Serge Semin)
- Add dw_pcie_cap_is() for testing controller capabilities (Serge Semin)
- Add generic resources getter to DesignWare core (Serge Semin)
- Combine iATU detection procedures (Serge Semin)
- Add generic clock and reset names to DesignWare core (Serge Semin)
- Add Baikal-T1 PCIe controller driver (Serge Semin)
* remotes/lorenzo/pci/dwc:
PCI: dwc: Add Baikal-T1 PCIe controller support
PCI: dwc: Introduce generic platform clocks and resets
PCI: dwc: Combine iATU detection procedures
PCI: dwc: Introduce generic resources getter
PCI: dwc: Introduce generic controller capabilities interface
PCI: dwc: Introduce dma-ranges property support for RC-host
dt-bindings: PCI: dwc: Add Baikal-T1 PCIe Root Port bindings
dt-bindings: PCI: dwc: Apply common schema to Rockchip DW PCIe nodes
dt-bindings: PCI: dwc: Add dma-coherent property
dt-bindings: PCI: dwc: Add clocks/resets common properties
dt-bindings: PCI: dwc: Add reg/reg-names common properties
dt-bindings: PCI: dwc: Add interrupts/interrupt-names common properties
dt-bindings: PCI: dwc: Add max-functions EP property
dt-bindings: PCI: dwc: Apply generic schema for generic device only
dt-bindings: PCI: dwc: Add max-link-speed common property
dt-bindings: PCI: dwc: Add phys/phy-names common properties
dt-bindings: PCI: dwc: Remove bus node from the examples
dt-bindings: PCI: dwc: Detach common RP/EP DT bindings
dt-bindings: visconti-pcie: Fix interrupts array max constraints
dt-bindings: imx6q-pcie: Fix clock names for imx6sx and imx8mq
PCI: histb: Switch to using gpiod API
PCI: imx6: Initialize PHY before deasserting core reset
PCI: dwc: Use dev_info for PCIe link down event logging
PCI: qcom: Fix error message for reset_control_assert()
PCI: designware-ep: Disable PTM capabilities for EP mode
PCI: Add PCI_PTM_CAP_RES macro
PCI: dwc: Fix n_fts[] array overrun
|
|
- Enable Multi-MSI (Jim Quinlan)
- Wait for 100ms after PERST# deassert for power and clocks to stabilize
(Jim Quinlan)
- Use readl_poll_timeout_atomic() instead of hand-rolled timeout loop (Jim
Quinlan)
- Drop needless "inline" annotations (Jim Quinlan)
- Set RCB_MPS mode bit so data for reads up to MPS are returned in a single
completion (Jim Quinlan)
* remotes/lorenzo/pci/brcmstb:
PCI: brcmstb: Set RCB_{MPS,64B}_MODE bits
PCI: brcmstb: Drop needless 'inline' annotations
PCI: brcmstb: Replace status loops with read_poll_timeout_atomic()
PCI: brcmstb: Wait for 100ms following PERST# deassert
PCI: brcmstb: Enable Multi-MSI
|
|
- Fix a double free in the error path of creating sysfs "resource%d"
attributes (Sascha Hauer)
* pci/sysfs:
PCI/sysfs: Fix double free in error path
|
|
- Remove EfiMemoryMappedIO regions from the E820 map to allow PCI core to
allocate BARs from them. The only purpose of EfiMemoryMappedIO is to
tell the OS to map things needed by EFI runtime services, so it's often
used for PCI host bridge apertures. If we can't allocate from those
apertures, we can't hot-add devices (Bjorn Helgaas)
* pci/resource:
x86/PCI: Use pr_info() when possible
x86/PCI: Fix log message typo
x86/PCI: Tidy E820 removal messages
PCI: Skip allocate_resource() if too little space available
efi/x86: Remove EfiMemoryMappedIO from E820 map
|
|
- Squash portdrv_core.c and portdrv_pci.c into portdrv.c to make it easier
to find things (Bjorn Helgaas)
- Allow AER service only for Root Ports & RCECs so portdrv can successfully
bind to other devices that have AER but lack MSI (which they don't need
for AER), which allows power management for those devices (Bjorn Helgaas)
* pci/portdrv:
PCI/portdrv: Allow AER service only for Root Ports & RCECs
PCI/portdrv: Unexport pcie_port_service_register(), pcie_port_service_unregister()
PCI/portdrv: Move private things to portdrv.c
PCI/portdrv: Squash into portdrv.c
|
|
- Remove unused 'state' parameter to pci_legacy_suspend_late() (Bjorn
Helgaas)
* pci/pm:
PCI/PM: Remove unused 'state' parameter to pci_legacy_suspend_late()
|
|
- Use METHOD_NAME__UID instead of plain string to make it easier to find
all uses (Yipeng Zou)
* pci/misc:
PCI/ACPI: Use METHOD_NAME__UID instead of plain string
|
|
- Enable pciehp by default if USB4 is enabled because USB4/Thunderbolt
tunneling depends on native PCIe hotplug (Albert Zhou)
- Make sure pciehp binds only to Downstream Ports, not Upstream Ports
(Rafael J. Wysocki)
- Remove unused get_mode1_ECC_cap callback in shpchp (Ian Cowan)
- Enable pciehp Command Completed Interrupt only if supported to reduce
confusion when looking at lspci output (Pali Rohár)
* pci/hotplug:
PCI: pciehp: Enable Command Completed Interrupt only if supported
PCI: shpchp: Remove unused get_mode1_ECC_cap callback
PCI: acpiphp: Avoid setting is_hotplug_bridge for PCIe Upstream Ports
PCI/portdrv: Set PCIE_PORT_SERVICE_HP for Root and Downstream Ports only
PCI: pciehp: Enable by default if USB4 enabled
|
|
- Only read/write PCIe Link 2 registers for devices with Links and PCIe
Capability version >= 2 (Maciej W. Rozycki)
- Revert a patch that cleared PCI_STATUS during enumeration because it
broke Linux guests on Apple's virtualization framework (Bjorn Helgaas)
- Assign PCI domain IDs using IDAs so IDs can be easily reused after
loading/unloading host bridge drivers (Pali Rohár)
- Fix pci_device_is_present(), which previously always returned "false" for
VFs because their vendor ID is always 0xfff (Michael S. Tsirkin)
- Check for alloc failure in pci_request_irq() (Zeng Heng)
* pci/enumeration:
PCI: Check for alloc failure in pci_request_irq()
PCI: Fix pci_device_is_present() for VFs by checking PF
PCI: Assign PCI domain IDs by ida_alloc()
Revert "PCI: Clear PCI_STATUS when setting up device"
PCI: Access Link 2 registers only for devices with Links
|
|
pci_bus_alloc_from_region() allocates MMIO space by iterating through all
the resources available on the bus. The available resource might be
reduced if the caller requires 32-bit space or we're avoiding BIOS or E820
areas.
Don't bother calling allocate_resource() if we need more space than is
available in this resource. This prevents some pointless and annoying
messages about avoided areas.
Link: https://lore.kernel.org/r/20221208190341.1560157-3-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
|
|
Previously portdrv allowed the AER service for any device with an AER
capability (assuming Linux had control of AER) even though the AER service
driver only attaches to Root Port and RCECs.
Because get_port_device_capability() included AER for non-RP, non-RCEC
devices, we tried to initialize the AER IRQ even though these devices
don't generate AER interrupts.
Intel DG1 and DG2 discrete graphics cards contain a switch leading to a
GPU. The switch supports AER but not MSI, so initializing an AER IRQ
failed, and portdrv failed to claim the switch port at all. The GPU itself
could be suspended, but the switch could not be put in a low-power state
because it had no driver.
Don't allow the AER service on non-Root Port, non-Root Complex Event
Collector devices. This means we won't enable Bus Mastering if the device
doesn't require MSI, the AER service will not appear in sysfs, and the AER
service driver will not bind to the device.
Link: https://lore.kernel.org/r/20221207084105.84947-1-mika.westerberg@linux.intel.com
Link: https://lore.kernel.org/r/20221210002922.1749403-1-helgaas@kernel.org
Based-on-patch-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
|
|
The No Command Completed Support bit in the Slot Capabilities register
indicates whether Command Completed Interrupt Enable is unsupported.
We already check whether No Command Completed Support bit is set in
pcie_wait_cmd(), and do not wait in this case.
Don't enable this Command Completed Interrupt at all if NCCS is set, so
that when users dump configuration space from userspace, the dump does not
confuse them by saying that Command Completed Interrupt is not supported,
but it is enabled.
Link: https://lore.kernel.org/r/20220927141926.8895-2-kabel@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
|
|
Current driver is missing a sentinel in the struct soc_device_attribute
array, which causes an oops when assessed by the
soc_device_match(mt7621_pcie_quirks_match) call.
This was only exposed once the CONFIG_SOC_MT7621 mt7621 soc_dev_attr
was fixed to register the SOC as a device, in:
commit 7c18b64bba3b ("mips: ralink: mt7621: do not use kzalloc too early")
Fix it by adding the required sentinel.
Link: https://lore.kernel.org/lkml/26ebbed1-0fe9-4af9-8466-65f841d0b382@app.fastmail.com
Link: https://lore.kernel.org/r/20221205204645.301301-1-git@johnthomson.fastmail.com.au
Fixes: b483b4e4d3f6 ("staging: mt7621-pci: add quirks for 'E2' revision using 'soc_device_attribute'")
Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
|
|
pci-epf-vntb.c:1128:33: sparse: expected void [noderef] __iomem *base
pci-epf-vntb.c:1128:33: sparse: got struct epf_ntb_ctrl *reg
Add __iomem type cast in vntb_epf_peer_spad_read() and
vntb_epf_peer_spad_write().
Link: https://lore.kernel.org/r/20221102141014.1025893-8-Frank.Li@nxp.com
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Frank Li <frank.li@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
|
|
Use epf_db[i] dereference instead of readl() because epf_db is
in memory allocated by dma_alloc_coherent(), not I/O.
Remove useless/duplicated readl() in the process.
Link: https://lore.kernel.org/r/20221102141014.1025893-7-Frank.Li@nxp.com
Signed-off-by: Frank Li <frank.li@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
|
|
NTB spad entry item size is sizeof(u32), replace hardcoded 4 with it.
Link: https://lore.kernel.org/r/20221102141014.1025893-6-Frank.Li@nxp.com
Signed-off-by: Frank Li <frank.li@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
|
|
epf_db_phy member in struct epf_ntb is not used, remove it.
Link: https://lore.kernel.org/r/20221102141014.1025893-5-Frank.Li@nxp.com
Signed-off-by: Frank Li <frank.li@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
|
|
Replace pci_epc_mem_free_addr() with pci_epf_free_space() in the
error handle path to match pci_epf_alloc_space().
Link: https://lore.kernel.org/r/20221102141014.1025893-4-Frank.Li@nxp.com
Fixes: e35f56bb0330 ("PCI: endpoint: Support NTB transfer between RC and EP")
Signed-off-by: Frank Li <frank.li@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
|
|
Align the indentation of struct epf_ntb_ctrl with other structs in
the driver.
Link: https://lore.kernel.org/r/20221102141014.1025893-3-Frank.Li@nxp.com
Signed-off-by: Frank Li <frank.li@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
|
|
Cleanup warning found by scripts/kernel-doc.
Consolidate terms:
- host, host1 to HOST
- vhost, vHost, Vhost, VHOST2 to VHOST
Link: https://lore.kernel.org/r/20221102141014.1025893-2-Frank.Li@nxp.com
Signed-off-by: Frank Li <frank.li@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
|
|
Baikal-T1 SoC is equipped with DWC PCIe v4.60a host controller. It can be
trained to work up to Gen.3 speed over up to x4 lanes. The host controller
is attached to the DW PCIe 3.0 PCS via the PIPE-4 interface, which in its
turn is connected to the DWC 10G PHY. The whole system is supposed to be
fed up with four clock sources: DBI peripheral clock, AXI application
clocks and external PHY/core reference clock generating the 100MHz signal.
In addition to that the platform provide a way to reset each part of the
controller: sticky/non-sticky bits, host controller core, PIPE interface,
PCS/PHY and Hot/Power reset signal. The driver also provides a way to
handle the GPIO-based PERST# signal.
Note due to the Baikal-T1 MMIO peculiarity we have to implement the DBI
interface accessors which make sure the IO operations are dword-aligned.
Link: https://lore.kernel.org/r/20221113191301.5526-21-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
|
|
Currently almost each platform driver uses its own resets and clocks
naming in order to get the corresponding descriptors. It makes the code
harder to maintain and comprehend especially seeing the DWC PCIe core main
resets and clocks signals set hasn't changed much for about at least one
major IP-core release. So in order to organize things around these signals
we suggest to create a generic interface for them in accordance with the
naming introduced in the DWC PCIe IP-core reference manual:
Application clocks:
- "dbi" - data bus interface clock (on some DWC PCIe platforms it's
referred as "pclk", "pcie", "sys", "ahb", "cfg", "iface",
"gio", "reg", "pcie_apb_sys");
- "mstr" - AXI-bus master interface clock (some DWC PCIe glue drivers
refer to this clock as "port", "bus", "pcie_bus",
"bus_master/master_bus/axi_m", "pcie_aclk");
- "slv" - AXI-bus slave interface clock (also called as "port", "bus",
"pcie_bus", "bus_slave/slave_bus/axi_s", "pcie_aclk",
"pcie_inbound_axi").
Core clocks:
- "pipe" - core-PCS PIPE interface clock coming from external PHY (it's
normally named by the platform drivers as just "pipe");
- "core" - primary clock of the controller (none of the platform drivers
declare such a clock but in accordance with the ref. manual
the devices may have it separately specified);
- "aux" - auxiliary PMC domain clock (it is named by some platforms as
"pcie_aux" and just "aux");
- "ref" - Generic reference clock (it is a generic clock source, which
can be used as a signal source for multiple interfaces, some
platforms call it as "ref", "general", "pcie_phy",
"pcie_phy_ref").
Application resets:
- "dbi" - Data-bus interface reset (it's CSR interface clock and is
normally called as "apb" though technically it's not APB but
DWC PCIe-specific interface);
- "mstr" - AXI-bus master reset (some platforms call it as "port", "apps",
"bus", "axi_m");
- "slv" - ABI-bus slave reset (some platforms call it as "port", "apps",
"bus", "axi_s").
Core resets:
- "non-sticky" - non-sticky CSR flags reset;
- "sticky" - sticky CSR flags reset;
- "pipe" - PIPE-interface (Core-PCS) logic reset (some platforms
call it just "pipe");
- "core" - controller primary reset (resets everything except PMC
module, some platforms refer to this signal as "soft",
"pci");
- "phy" - PCS/PHY block reset (strictly speaking it is normally
connected to the input of an external block, but the
reference manual says it must be available for the PMC
working correctly, some existing platforms call it
"pciephy", "phy", "link");
- "hot" - PMC hot reset signal (also called as "sleep");
- "pwr" - cold reset signal (can be referred as "pwr", "turnoff").
Bus reset:
- "perst" - PCIe standard signal used to reset the PCIe peripheral
devices.
As you can see each platform uses it's own naming for basically the same
set of the signals. In the framework of this commit we suggest to add a
set of the clocks and reset signals resources, corresponding names and
identifiers for each denoted entity. At current stage the platforms will
be able to use the provided infrastructure to automatically request all
these resources and manipulate with them in the Host/EP init callbacks.
Alas it isn't that easy to create a common cold/hot reset procedure due to
too many platform-specifics in the procedure, like the external flags
exposure and the delays requirement.
Link: https://lore.kernel.org/r/20221113191301.5526-20-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
|
|
Since the iATU CSR region is now retrieved in the DW PCIe resources getter
there is no much benefits in the iATU detection procedures splitting up.
Therefore let's join the iATU unroll/viewport detection procedure with the
rest of the iATU parameters detection code. The resultant method will be
as coherent as before, while the redundant functions will be eliminated
thus producing more readable code.
Link: https://lore.kernel.org/r/20221113191301.5526-19-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
Currently the DW PCIe Root Port and Endpoint CSR spaces are retrieved in
the separate parts of the DW PCIe core driver. It doesn't really make
sense since the both controller types have identical set of the core CSR
regions: DBI, DBI CS2 and iATU/eDMA. Thus we can simplify the DW PCIe Host
and EP initialization methods by moving the platform-specific registers
space getting and mapping into a common method. It gets to be even more
justified seeing the CSRs base address pointers are preserved in the
common DW PCIe descriptor. Note all the OF-based common DW PCIe settings
initialization will be moved to the new method too in order to have a
single function for all the generic platform properties handling in single
place.
A nice side-effect of this change is that the pcie-designware-host.c and
pcie-designware-ep.c drivers are cleaned up from all the direct dw_pcie
storage modification, which makes the DW PCIe core, Root Port and Endpoint
modules more coherent.
Link: https://lore.kernel.org/r/20221113191301.5526-18-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
|
|
Since in addition to the already available iATU unrolled mapping we are
about to add a few more DW PCIe platform-specific capabilities (CDM-check
and generic clocks/resets resources) let's add a generic interface to set
and get the flags indicating their availability. The new interface shall
improve maintainability of the platform-specific code.
Link: https://lore.kernel.org/r/20221113191301.5526-17-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
In accordance with the generic PCIe Root Port DT-bindings the "dma-ranges"
property has the same format as the "ranges" property. The only difference
is in their semantics. The "dma-ranges" property describes the PCIe-to-CPU
memory mapping in opposite to the CPU-to-PCIe mapping of the "ranges"
property. Even though the DW PCIe controllers are normally equipped with
the internal Address Translation Unit which inbound and outbound tables
can be used to implement both properties semantics, it was surprising for
me to discover that the host-related part of the DW PCIe driver currently
supports the "ranges" property only while the "dma-ranges" windows are
just ignored. Having the "dma-ranges" supported in the driver would be
very handy for the platforms, that don't tolerate the 1:1 CPU-PCIe memory
mapping and require a customized PCIe memory layout. So let's fix that by
introducing the "dma-ranges" property support.
First of all we suggest to rename the dw_pcie_prog_inbound_atu() method to
dw_pcie_prog_ep_inbound_atu() and create a new version of the
dw_pcie_prog_inbound_atu() function. Thus we'll have two methods for the
RC and EP controllers respectively in the same way as it has been
developed for the outbound ATU setup methods.
Secondly aside with the memory window index and type the new
dw_pcie_prog_inbound_atu() function will accept CPU address, PCIe address
and size as its arguments. These parameters define the PCIe and CPU memory
ranges which will be used to setup the respective inbound ATU mapping. The
passed parameters need to be verified against the ATU ranges constraints
in the same way as it is done for the outbound ranges.
Finally the DMA-ranges detected for the PCIe controller need to be
converted to the inbound ATU entries during the host controller
initialization procedure. It will be done in the framework of the
dw_pcie_iatu_setup() method. Note before setting the inbound ranges up we
need to disable all the inbound ATU entries in order to prevent unexpected
PCIe TLPs translations defined by some third party software like
bootloaders.
Link: https://lore.kernel.org/r/20221113191301.5526-16-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
The ->get_mode1_ECC_cap callback in the shpchp_hpc_ops struct is never
called, so remove it.
[bhelgaas: squash]
Link: https://lore.kernel.org/r/20221112142859.319733-2-ian@linux.cowan.aero
Link: https://lore.kernel.org/r/20221112142859.319733-3-ian@linux.cowan.aero
Link: https://lore.kernel.org/r/20221112142859.319733-4-ian@linux.cowan.aero
Signed-off-by: Ian Cowan <ian@linux.cowan.aero>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
It is reported that on some systems pciehp binds to an Upstream Port and
attempts to operate it which causes devices below the Port to disappear
from the bus.
This happens because acpiphp sets dev->is_hotplug_bridge for that Port
(after receiving a Device Check notification on it from the platform
firmware via ACPI) during the enumeration of PCI devices.
get_port_device_capability() sees that dev->is_hotplug_bridge is set and
adds PCIE_PORT_SERVICE_HP to Port services, which allows pciehp to bind to
the Port in question.
Even though this particular problem can be addressed by making the
portdrv_core checks more robust, it also causes power management to work
differently on the affected systems which generally is not desirable (PCIe
Ports with dev->is_hotplug_bridge set have to pass additional tests to be
allowed to go into the D3hot/cold power states which affects runtime PM of
devices below these Ports).
For this reason, amend check_hotplug_bridge() with a PCIe type check to
prevent it from setting dev->is_hotplug_bridge for Upstream Ports.
Suggested-by: Lukas Wunner <lukas@wunner.de>
Link: https://lore.kernel.org/r/2262230.ElGaqSPkdT@kreacher
Reported-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Tested-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
|
|
It is reported that on some systems pciehp binds to an Upstream Port and
attempts to operate it which causes devices below the Port to disappear
from the bus.
This happens because acpiphp sets dev->is_hotplug_bridge for that Port
(after receiving a Device Check notification on it from the platform
firmware via ACPI) during the enumeration of PCI devices.
get_port_device_capability() sees that dev->is_hotplug_bridge is set and
adds PCIE_PORT_SERVICE_HP to Port services (which allows pciehp to bind to
the Port in question) without consulting the PCIe type, which should be
either Root Port or Downstream Port for the hotplug capability to be
present.
Per PCIe r6.0, sec 7.5.3.2, the Slot Implemented bit is only valid for
Downstream Ports (including Root Ports), and PCIe hotplug depends on the
Slot Capabilities / Control / Status registers.
Make get_port_device_capability() more robust by adding a PCIe type check
to it before adding PCIE_PORT_SERVICE_HP to Port services which helps to
avoid the problem.
[bhelgaas: add spec citation]
Suggested-by: Lukas Wunner <lukas@wunner.de>
Link: https://lore.kernel.org/r/4786090.31r3eYUQgx@kreacher
Reported-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
|
|
When kvasprintf() fails to allocate memory, it returns a NULL pointer.
Return error from pci_request_irq() so we don't dereference it.
[bhelgaas: commit log]
Fixes: 704e8953d3e9 ("PCI/irq: Add pci_request_irq() and pci_free_irq() helpers")
Link: https://lore.kernel.org/r/20221121020029.3759444-1-zengheng4@huawei.com
Signed-off-by: Zeng Heng <zengheng4@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Per PCIe r6.0, sec 6.30.1, a data object Length of 0x0 indicates 2^18
DWORDs (256K DW or 1MB) being transferred. Adjust the value of data object
length for this case on both sending side and receiving side.
Don't bother checking whether Length is greater than SZ_1M because all
values of the 18-bit Length field are valid, and it is impossible to
represent anything larger than SZ_1M:
0x00000 256K DW (1M bytes)
0x00001 1 DW (4 bytes)
...
0x3ffff 256K-1 DW (1M - 4 bytes)
[bhelgaas: commit log]
Link: https://lore.kernel.org/r/20221116015637.3299664-1-ming4.li@intel.com
Fixes: 9d24322e887b ("PCI/DOE: Add DOE mailbox support functions")
Signed-off-by: Li Ming <ming4.li@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org # v6.0+
|
|
Thunderbolt/USB4 PCIe tunneling depends on native PCIe hotplug. Enable
pciehp by default if USB4 is enabled.
[bhelgaas: squash, update subject, commit logs, tidy whitespace]
Link: https://lore.kernel.org/r/20221115113857.35800-2-albert.zhou.50@gmail.com
Link: https://lore.kernel.org/r/20221115113857.35800-3-albert.zhou.50@gmail.com
Signed-off-by: Albert Zhou <albert.zhou.50@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
This patch switches the driver away from legacy gpio/of_gpio API to
gpiod API, and removes use of of_get_named_gpio_flags() which I want to
make private to gpiolib.
Link: https://lore.kernel.org/r/20220906204301.3736813-1-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
|
|
pci_device_is_present() previously didn't work for VFs because it reads the
Vendor and Device ID, which are 0xffff for VFs, which looks like they
aren't present. Check the PF instead.
Wei Gong reported that if virtio I/O is in progress when the driver is
unbound or "0" is written to /sys/.../sriov_numvfs, the virtio I/O
operation hangs, which may result in output like this:
task:bash state:D stack: 0 pid: 1773 ppid: 1241 flags:0x00004002
Call Trace:
schedule+0x4f/0xc0
blk_mq_freeze_queue_wait+0x69/0xa0
blk_mq_freeze_queue+0x1b/0x20
blk_cleanup_queue+0x3d/0xd0
virtblk_remove+0x3c/0xb0 [virtio_blk]
virtio_dev_remove+0x4b/0x80
...
device_unregister+0x1b/0x60
unregister_virtio_device+0x18/0x30
virtio_pci_remove+0x41/0x80
pci_device_remove+0x3e/0xb0
This happened because pci_device_is_present(VF) returned "false" in
virtio_pci_remove(), so it called virtio_break_device(). The broken vq
meant that vring_interrupt() skipped the vq.callback() that would have
completed the virtio I/O operation via virtblk_done().
[bhelgaas: commit log, simplify to always use pci_physfn(), add stable tag]
Link: https://lore.kernel.org/r/20221026060912.173250-1-mst@redhat.com
Reported-by: Wei Gong <gongwei833x@gmail.com>
Tested-by: Wei Gong <gongwei833x@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
|
|
When the PHY is the reference clock provider then it must be initialized
and powered on before the reset on the client is deasserted, otherwise
the link will never come up. The order was changed in cf236e0c0d59.
Restore the correct order to make the driver work again on boards where
the PHY provides the reference clock. This also changes the order for
boards where the Soc is the PHY reference clock divider, but this
shouldn't do any harm.
Link: https://lore.kernel.org/r/20221101095714.440001-1-s.hauer@pengutronix.de
Fixes: cf236e0c0d59 ("PCI: imx6: Do not hide PHY driver callbacks and refine the error handling")
Tested-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
|
|
On Qualcomm platforms like SC8280XP and SA8540P, interconnect bandwidth
must be requested before enabling interconnect clocks.
Add basic support for managing an optional "pcie-mem" interconnect path
by setting a low constraint before enabling clocks and updating it after
the link is up.
Note that it is not possible for a controller driver to set anything but
a maximum peak bandwidth as expected average bandwidth will vary with
use case and actual use (and power policy?). This very much remains an
unresolved problem with the interconnect framework.
Also note that no constraint is set for the SC8280XP/SA8540P "cpu-pcie"
path for now as it is not clear what an appropriate constraint would be
(and the system does not crash when left unspecified).
Link: https://lore.kernel.org/r/20221102090705.23634-3-johan+linaro@kernel.org
Fixes: 70574511f3fc ("PCI: qcom: Add support for SC8280XP")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Acked-by: Georgi Djakov <djakov@kernel.org>
|
|
Set RCB_MPS mode bit so that data for PCIe read requests up to the size of
the Maximum Payload Size (MPS) are returned in one completion, and data for
PCIe read requests greater than the MPS are split at the specified Read
Completion Boundary setting.
Set RCB_64B so that the Read Compeletion Boundary is 64B.
Link: https://lore.kernel.org/r/20221011184211.18128-6-jim2101024@gmail.com
Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
A number of inline functions are called rarely and/or are not
time-critical. Take out the "inline" and let the compiler do its work.
Link: https://lore.kernel.org/r/20221011184211.18128-5-jim2101024@gmail.com
Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
It would be nice to replace the PCIe link-up loop as well but
there are too many uses of this that do not poll (and the
read_poll_timeout uses "timeout==0" to loop forever).
Link: https://lore.kernel.org/r/20221011184211.18128-4-jim2101024@gmail.com
Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
Be prudent and give some time for power and clocks to become stable. As
described in the PCIe CEM specification sections 2.2 and 2.2.1; as well as
PCIe r5.0, 6.6.1.
Link: https://lore.kernel.org/r/20221011184211.18128-3-jim2101024@gmail.com
Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
We always wanted to enable Multi-MSI but didn't have a test device until
recently. In addition, there are some devices out there that will ask for
multiple MSI but refuse to work if they are only granted one.
Link: https://lore.kernel.org/r/20221011184211.18128-2-jim2101024@gmail.com
Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
Some of the platforms (like Tegra194 and Tegra234) have open slots and
not having an endpoint connected to the slot is not an error.
So, changing the macro from dev_err to dev_info to log the event.
Link: https://lore.kernel.org/r/20220913101237.4337-1-vidyas@nvidia.com
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
Fix the error message to mention "assert" instead of "deassert".
Link: https://lore.kernel.org/r/20221109094039.25753-1-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
|
|
When pci_create_attr() fails, pci_remove_resource_files() is called which
will iterate over the res_attr[_wc] arrays and frees every non NULL entry.
To avoid a double free here set the array entry only after it's clear we
successfully initialized it.
Fixes: b562ec8f74e4 ("PCI: Don't leak memory if sysfs_create_bin_file() fails")
Link: https://lore.kernel.org/r/20221007070735.GX986@pengutronix.de/
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
|
|
Replace assignment of PCI domain IDs from atomic_inc_return() to
ida_alloc().
Use two IDAs, one for static domain allocations (those which are defined in
device tree) and second for dynamic allocations (all other).
During removal of root bus / host bridge, also release the domain ID. The
released ID can be reused again, for example when dynamically loading and
unloading native PCI host bridge drivers.
This change also allows to mix static device tree assignment and dynamic by
kernel as all static allocations are reserved in dynamic pool.
[bhelgaas: set "err" if "bus->domain_nr < 0"]
Link: https://lore.kernel.org/r/20220714184130.5436-1-pali@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
This reverts commit 6cd514e58f12b211d638dbf6f791fa18d854f09c.
Christophe Fergeau reported that 6cd514e58f12 ("PCI: Clear PCI_STATUS when
setting up device") causes boot failures when trying to start linux guests
with Apple's virtualization framework (for example using
https://developer.apple.com/documentation/virtualization/running_linux_in_a_virtual_machine?language=objc)
6cd514e58f12 only solved a cosmetic problem, so revert it to fix the boot
failures.
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2137803
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Replace the string "_UID" with the METHOD_NAME__UID macro so instances are
easier to find.
Link: https://lore.kernel.org/r/20221104032430.186424-1-zouyipeng@huawei.com
Signed-off-by: Yipeng Zou <zouyipeng@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
