summaryrefslogtreecommitdiff
path: root/drivers/pci/quirks.c
AgeCommit message (Collapse)Author
2025-02-21PCI: Avoid FLR for Mediatek MT7922 WiFiBjorn Helgaas
commit 81f64e925c29fe6e99f04b131fac1935ac931e81 upstream. The Mediatek MT7922 WiFi device advertises FLR support, but it apparently does not work, and all subsequent config reads return ~0: pci 0000:01:00.0: [14c3:0616] type 00 class 0x028000 PCIe Endpoint pciback 0000:01:00.0: not ready 65535ms after FLR; giving up After an FLR, pci_dev_wait() waits for the device to become ready. Prior to d591f6804e7e ("PCI: Wait for device readiness with Configuration RRS"), it polls PCI_COMMAND until it is something other that PCI_POSSIBLE_ERROR (~0). If it times out, pci_dev_wait() returns -ENOTTY and __pci_reset_function_locked() tries the next available reset method. Typically this is Secondary Bus Reset, which does work, so the MT7922 is eventually usable. After d591f6804e7e, if Configuration Request Retry Status Software Visibility (RRS SV) is enabled, pci_dev_wait() polls PCI_VENDOR_ID until it is something other than the special 0x0001 Vendor ID that indicates a completion with RRS status. When RRS SV is enabled, reads of PCI_VENDOR_ID should return either 0x0001, i.e., the config read was completed with RRS, or a valid Vendor ID. On the MT7922, it seems that all config reads after FLR return ~0 indefinitely. When pci_dev_wait() reads PCI_VENDOR_ID and gets 0xffff, it assumes that's a valid Vendor ID and the device is now ready, so it returns with success. After pci_dev_wait() returns success, we restore config space and continue. Since the MT7922 is not actually ready after the FLR, the restore fails and the device is unusable. We considered changing pci_dev_wait() to continue polling if a PCI_VENDOR_ID read returns either 0x0001 or 0xffff. This "works" as it did before d591f6804e7e, although we have to wait for the timeout and then fall back to SBR. But it doesn't work for SR-IOV VFs, which *always* return 0xffff as the Vendor ID. Mark Mediatek MT7922 WiFi devices to avoid the use of FLR completely. This will cause fallback to another reset method, such as SBR. Link: https://lore.kernel.org/r/20250212193516.88741-1-helgaas@kernel.org Fixes: d591f6804e7e ("PCI: Wait for device readiness with Configuration RRS") Link: https://github.com/QubesOS/qubes-issues/issues/9689#issuecomment-2582927149 Link: https://lore.kernel.org/r/Z4pHll_6GX7OUBzQ@mail-itl Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-02-21PCI: switchtec: Add Microchip PCI100X device IDsRakesh Babu Saladi
[ Upstream commit a3282f84b2151d254dc4abf24d1255c6382be774 ] Add Microchip parts to the Device ID table so the driver supports PCI100x devices. Add a new macro to quirk the Microchip Switchtec PCI100x parts to allow DMA access via NTB to work when the IOMMU is turned on. PCI100x family has 6 variants; each variant is designed for different application usages, different port counts and lane counts: PCI1001 has 1 x4 upstream port and 3 x4 downstream ports PCI1002 has 1 x4 upstream port and 4 x2 downstream ports PCI1003 has 2 x4 upstream ports, 2 x2 upstream ports, and 2 x2 downstream ports PCI1004 has 4 x4 upstream ports PCI1005 has 1 x4 upstream port and 6 x2 downstream ports PCI1006 has 6 x2 upstream ports and 2 x2 downstream ports [Historical note: these parts use PCI_VENDOR_ID_EFAR (0x1055), from EFAR Microsystems, which was acquired in 1996 by Standard Microsystems Corp, which was acquired by Microchip Technology in 2012. The PCI-SIG confirms that Vendor ID 0x1055 is assigned to Microchip even though it's not visible via https://pcisig.com/membership/member-companies] Link: https://lore.kernel.org/r/20250120095524.243103-1-Saladi.Rakeshbabu@microchip.com Signed-off-by: Rakesh Babu Saladi <Saladi.Rakeshbabu@microchip.com> [bhelgaas: Vendor ID history] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-By: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-02-21PCI/DPC: Quirk PIO log size for Intel Raptor Lake-PTakashi Iwai
[ Upstream commit b198499c7d2508a76243b98e7cca992f6fd2b7f7 ] Apparently the Raptor Lake-P reference firmware configures the PIO log size correctly, but some vendor BIOSes, including at least ASUSTeK COMPUTER INC. Zenbook UX3402VA_UX3402VA, do not. Apply the quirk for Raptor Lake-P. This prevents kernel complaints like: DPC: RP PIO log size 0 is invalid and also enables the DPC driver to dump the RP PIO Log registers when DPC is triggered. Note that the bug report also mentions 8086:a76e, which has been already added by 627c6db20703 ("PCI/DPC: Quirk PIO log size for Intel Raptor Lake Root Ports"). Link: https://lore.kernel.org/r/20250102164315.7562-1-tiwai@suse.de Link: https://bugzilla.suse.com/show_bug.cgi?id=1234623 Signed-off-by: Takashi Iwai <tiwai@suse.de> [bhelgaas: commit log] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-14PCI: Add ACS quirk for Wangxun FF5xxx NICsMengyuan Lou
[ Upstream commit aa46a3736afcb7b0793766d22479b8b99fc1b322 ] Wangxun FF5xxx NICs are similar to SFxxx, RP1000 and RP2000 NICs. They may be multi-function devices, but they do not advertise an ACS capability. But the hardware does isolate FF5xxx functions as though it had an ACS capability and PCI_ACS_RR and PCI_ACS_CR were set in the ACS Control register, i.e., all peer-to-peer traffic is directed upstream instead of being routed internally. Add ACS quirk for FF5xxx NICs in pci_quirk_wangxun_nic_acs() so the functions can be in independent IOMMU groups. Link: https://lore.kernel.org/r/E16053DB2B80E9A5+20241115024604.30493-1-mengyuanlou@net-swift.com Signed-off-by: Mengyuan Lou <mengyuanlou@net-swift.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-19Merge branch 'pci/quirks'Bjorn Helgaas
- Add an ACS quirk for Qualcomm SA8775P, which doesn't advertise ACS but does provide ACS-like features (Subramanian Ananthanarayanan) - Mark Creative Labs EMU20k2 INTx masking as broken (Alex Williamson) * pci/quirks: PCI: Mark Creative Labs EMU20k2 INTx masking as broken PCI: Add ACS quirk for Qualcomm SA8775P
2024-09-19Merge branch 'pci/iommu'Bjorn Helgaas
- Add function 0 DMA alias quirk for Glenfly Arise audio function, which uses the function 0 Requester ID (WangYuli) * pci/iommu: PCI: Add function 0 DMA alias quirk for Glenfly Arise chip
2024-09-13PCI: Mark Creative Labs EMU20k2 INTx masking as brokenAlex Williamson
Per user reports, the Creative Labs EMU20k2 (Sound Blaster X-Fi Titanium Series) generates spurious interrupts when used with vfio-pci unless DisINTx masking support is disabled. Thus, quirk the device to mark INTx masking as broken. Closes: https://lore.kernel.org/all/VI1PR10MB8207C507DB5420AB4C7281E0DB9A2@VI1PR10MB8207.EURPRD10.PROD.OUTLOOK.COM Link: https://lore.kernel.org/linux-pci/20240912215331.839220-1-alex.williamson@redhat.com Reported-by: zdravko delineshev <delineshev@outlook.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> [kwilczynski: commit log] Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
2024-09-09PCI: Use an error code with PCIe failed link retrainingMaciej W. Rozycki
Given how the call place in pcie_wait_for_link_delay() got structured now, and that pcie_retrain_link() returns a potentially useful error code, convert pcie_failed_link_retrain() to return an error code rather than a boolean status, fixing handling at the call site mentioned. Update the other call site accordingly. Fixes: 1abb47390350 ("Merge branch 'pci/enumeration'") Link: https://lore.kernel.org/r/alpine.DEB.2.21.2408091156530.61955@angie.orcam.me.uk Reported-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/aa2d1c4e-9961-d54a-00c7-ddf8e858a9b0@linux.intel.com/ Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Cc: <stable@vger.kernel.org> # v6.5+
2024-09-09PCI: Correct error reporting with PCIe failed link retrainingMaciej W. Rozycki
Only return successful completion status from pcie_failed_link_retrain() if retraining has actually been done, preventing excessive delays from being triggered at call sites in a hope that communication will finally be established with the downstream device where in fact nothing has been done about the link in question that would justify such a hope. Fixes: a89c82249c37 ("PCI: Work around PCIe link training failures") Link: https://lore.kernel.org/r/alpine.DEB.2.21.2408091133260.61955@angie.orcam.me.uk Reported-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/aa2d1c4e-9961-d54a-00c7-ddf8e858a9b0@linux.intel.com/ Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Cc: <stable@vger.kernel.org> # v6.5+
2024-09-09PCI: Revert to the original speed after PCIe failed link retrainingMaciej W. Rozycki
When `pcie_failed_link_retrain' has failed to retrain the link by hand it leaves the link speed restricted to 2.5GT/s, which will then affect any device that has been plugged in later on, which may not suffer from the problem that caused the speed restriction to have been attempted. Consequently such a downstream device will suffer from an unnecessary communication throughput limitation and therefore performance loss. Remove the speed restriction then and revert the Link Control 2 register to its original state if link retraining with the speed restriction in place has failed. Retrain the link again afterwards so as to remove any residual state, waiting on LT rather than DLLLA to avoid an excessive delay and ignoring the result as this training is supposed to fail anyway. Fixes: a89c82249c37 ("PCI: Work around PCIe link training failures") Link: https://lore.kernel.org/linux-pci/alpine.DEB.2.21.2408251412590.30766@angie.orcam.me.uk Reported-by: Matthew W Carlis <mattc@purestorage.com> Link: https://lore.kernel.org/r/20240806000659.30859-1-mattc@purestorage.com/ Link: https://lore.kernel.org/r/20240722193407.23255-1-mattc@purestorage.com/ Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Cc: <stable@vger.kernel.org> # v6.5+
2024-09-06PCI: Add ACS quirk for Qualcomm SA8775PSubramanian Ananthanarayanan
The Qualcomm SA8775P root ports don't advertise an ACS capability, but they do provide ACS-like features to disable peer transactions and validate bus numbers in requests. Thus, add an ACS quirk for the SA8775P. Link: https://lore.kernel.org/linux-pci/20240906052228.1829485-1-quic_skananth@quicinc.com Signed-off-by: Subramanian Ananthanarayanan <quic_skananth@quicinc.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
2024-08-23PCI: Add function 0 DMA alias quirk for Glenfly Arise chipWangYuli
Add DMA support for audio function of Glenfly Arise chip, which uses Requester ID of function 0. Link: https://lore.kernel.org/r/CA2BBD087345B6D1+20240823095708.3237375-1-wangyuli@uniontech.com Signed-off-by: SiyuLi <siyuli@glenfly.com> Signed-off-by: WangYuli <wangyuli@uniontech.com> [bhelgaas: lower-case hex to match local code, drop unused Device IDs] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Takashi Iwai <tiwai@suse.de>
2024-05-28PCI: Add ACS quirk for Broadcom BCM5760X NICAjit Khaparde
The Broadcom BCM5760X NIC may be a multi-function device. While it does not advertise an ACS capability, peer-to-peer transactions are not possible between the individual functions. So it is ok to treat them as fully isolated. Add an ACS quirk for this device so the functions can be in independent IOMMU groups and attached individually to userspace applications using VFIO. [kwilczynski: commit log] Link: https://lore.kernel.org/linux-pci/20240510204228.73435-1-ajit.khaparde@broadcom.com Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
2024-05-21Merge tag 'pci-v6.10-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci Pull pci updates from Bjorn Helgaas: "Enumeration: - Skip E820 checks for MCFG ECAM regions for new (2016+) machines, since there's no requirement to describe them in E820 and some platforms require ECAM to work (Bjorn Helgaas) - Rename PCI_IRQ_LEGACY to PCI_IRQ_INTX to be more specific (Damien Le Moal) - Remove last user and pci_enable_device_io() (Heiner Kallweit) - Wait for Link Training==0 to avoid possible race (Ilpo Järvinen) - Skip waiting for devices that have been disconnected while suspended (Ilpo Järvinen) - Clear Secondary Status errors after enumeration since Master Aborts and Unsupported Request errors are an expected part of enumeration (Vidya Sagar) MSI: - Remove unused IMS (Interrupt Message Store) support (Bjorn Helgaas) Error handling: - Mask Genesys GL975x SD host controller Replay Timer Timeout correctable errors caused by a hardware defect; the errors cause interrupts that prevent system suspend (Kai-Heng Feng) - Fix EDR-related _DSM support, which previously evaluated revision 5 but assumed revision 6 behavior (Kuppuswamy Sathyanarayanan) ASPM: - Simplify link state definitions and mask calculation (Ilpo Järvinen) Power management: - Avoid D3cold for HP Pavilion 17 PC/1972 PCIe Ports, where BIOS apparently doesn't know how to put them back in D0 (Mario Limonciello) CXL: - Support resetting CXL devices; special handling required because CXL Ports mask Secondary Bus Reset by default (Dave Jiang) DOE: - Support DOE Discovery Version 2 (Alexey Kardashevskiy) Endpoint framework: - Set endpoint BAR to be 64-bit if the driver says that's all the device supports, in addition to doing so if the size is >2GB (Niklas Cassel) - Simplify endpoint BAR allocation and setting interfaces (Niklas Cassel) Cadence PCIe controller driver: - Drop DT binding redundant msi-parent and pci-bus.yaml (Krzysztof Kozlowski) Cadence PCIe endpoint driver: - Configure endpoint BARs to be 64-bit based on the BAR type, not the BAR value (Niklas Cassel) Freescale Layerscape PCIe controller driver: - Convert DT binding to YAML (Frank Li) MediaTek MT7621 PCIe controller driver: - Add DT binding missing 'reg' property for child Root Ports (Krzysztof Kozlowski) - Fix theoretical string truncation in PHY name (Sergio Paracuellos) NVIDIA Tegra194 PCIe controller driver: - Return success for endpoint probe instead of falling through to the failure path (Vidya Sagar) Renesas R-Car PCIe controller driver: - Add DT binding missing IOMMU properties (Geert Uytterhoeven) - Add DT binding R-Car V4H compatible for host and endpoint mode (Yoshihiro Shimoda) Rockchip PCIe controller driver: - Configure endpoint BARs to be 64-bit based on the BAR type, not the BAR value (Niklas Cassel) - Add DT binding missing maxItems to ep-gpios (Krzysztof Kozlowski) - Set the Subsystem Vendor ID, which was previously zero because it was masked incorrectly (Rick Wertenbroek) Synopsys DesignWare PCIe controller driver: - Restructure DBI register access to accommodate devices where this requires Refclk to be active (Manivannan Sadhasivam) - Remove the deinit() callback, which was only need by the pcie-rcar-gen4, and do it directly in that driver (Manivannan Sadhasivam) - Add dw_pcie_ep_cleanup() so drivers that support PERST# can clean up things like eDMA (Manivannan Sadhasivam) - Rename dw_pcie_ep_exit() to dw_pcie_ep_deinit() to make it parallel to dw_pcie_ep_init() (Manivannan Sadhasivam) - Rename dw_pcie_ep_init_complete() to dw_pcie_ep_init_registers() to reflect the actual functionality (Manivannan Sadhasivam) - Call dw_pcie_ep_init_registers() directly from all the glue drivers, not just those that require active Refclk from the host (Manivannan Sadhasivam) - Remove the "core_init_notifier" flag, which was an obscure way for glue drivers to indicate that they depend on Refclk from the host (Manivannan Sadhasivam) TI J721E PCIe driver: - Add DT binding J784S4 SoC Device ID (Siddharth Vadapalli) - Add DT binding J722S SoC support (Siddharth Vadapalli) TI Keystone PCIe controller driver: - Add DT binding missing num-viewport, phys and phy-name properties (Jan Kiszka) Miscellaneous: - Constify and annotate with __ro_after_init (Heiner Kallweit) - Convert DT bindings to YAML (Krzysztof Kozlowski) - Check for kcalloc() failure in of_pci_prop_intr_map() (Duoming Zhou)" * tag 'pci-v6.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (97 commits) PCI: Do not wait for disconnected devices when resuming x86/pci: Skip early E820 check for ECAM region PCI: Remove unused pci_enable_device_io() ata: pata_cs5520: Remove unnecessary call to pci_enable_device_io() PCI: Update pci_find_capability() stub return types PCI: Remove PCI_IRQ_LEGACY scsi: vmw_pvscsi: Do not use PCI_IRQ_LEGACY instead of PCI_IRQ_LEGACY scsi: pmcraid: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY scsi: mpt3sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY scsi: megaraid_sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY scsi: ipr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY scsi: hpsa: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY scsi: arcmsr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY wifi: rtw89: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY dt-bindings: PCI: rockchip,rk3399-pcie: Add missing maxItems to ep-gpios Revert "genirq/msi: Provide constants for PCI/IMS support" Revert "x86/apic/msi: Enable PCI/IMS" Revert "iommu/vt-d: Enable PCI/IMS" Revert "iommu/amd: Enable PCI/IMS" Revert "PCI/MSI: Provide IMS (Interrupt Message Store) support" ...
2024-03-29Revert "PCI: Mark LSI FW643 to avoid bus reset"Bjorn Helgaas
This reverts commit 29a43dc130ce65d365a8ea9e1cc4bc51005a353e. 29a43dc130ce ("PCI: Mark LSI FW643 to avoid bus reset") by Edmund was based on the assumption that the LSI / Agere FW643 has a defect such that it can't recover after a Secondary Bus Reset (SBR). But Takashi Sakamoto reported that SBR works fine on this same FW643 device in an AMD Ryzen 5 2400G system, so apparently there is some other aspect of Edmund's system that accounts for the issue. The down side of 29a43dc130ce is that when the FW643 is assigned to a VM, avoiding the SBR means we leak data out of the VM. Revert 29a43dc130ce until we figure out a better solution. In the meantime, we can use the sysfs "reset_method" interface to restrict the available reset methods. Link: https://lore.kernel.org/r/20240328212302.1582483-1-helgaas@kernel.org Fixes: 29a43dc130ce ("PCI: Mark LSI FW643 to avoid bus reset") Reported-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20240325012135.36861-1-o-takashi@sakamocchi.jp Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
2024-03-27PCI: Mask Replay Timer Timeout errors for Genesys GL975x SD host controllerKai-Heng Feng
Due to a hardware defect in GL975x, config accesses when ASPM is enabled frequently cause Replay Timer Timeouts in the Port leading to the device. These are Correctable Errors, so the Downstream Port logs it in its AER Correctable Error Status register and, when the error is not masked, sends an ERR_COR message upstream. The message terminates at a Root Port, which may generate an AER interrupt so the OS can log it. The Correctable Error logging is an annoyance but not a major issue itself. But when the AER interrupt happens during suspend, it can prevent the system from suspending. 015c9cbcf0ad ("mmc: sdhci-pci-gli: GL9750: Mask the replay timer timeout of AER") masked these errors in the GL975x itself. Mask these errors in the Port leading to GL975x as well. Note that Replay Timer Timeouts will still be logged in the AER Correctable Error Status register, but they will not cause AER interrupts. Link: https://lore.kernel.org/r/20240327024509.1071189-1-kai.heng.feng@canonical.com Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> [bhelgaas: commit log, update dmesg note] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Victor Shih <victor.shih@genesyslogic.com.tw> Cc: Ben Chuang <benchuanggli@gmail.com>
2024-03-12Merge branch 'pci/virtualization'Bjorn Helgaas
- Avoid Secondary Bus Reset on the LSI / Agere FW643, which allows it to be assigned to VMs with VFIO, at the cost of leaking FW643 state between VMs (Edmund Raile) * pci/virtualization: PCI: Mark LSI FW643 to avoid bus reset
2024-03-12Merge branch 'pci/enumeration'Bjorn Helgaas
- Collect interrupt-related code in irq.c (Ilpo Järvinen) - Mark 3ware-9650SE Root Port Extended Tags as broken (Jörg Wedekind) * pci/enumeration: PCI: Mark 3ware-9650SE Root Port Extended Tags as broken PCI: Place interrupt related code into irq.c # Conflicts: # drivers/pci/Makefile
2024-03-05PCI/DPC: Quirk PIO log size for Intel Raptor Lake Root PortsPaul Menzel
Commit 5459c0b70467 ("PCI/DPC: Quirk PIO log size for certain Intel Root Ports") and commit 3b8803494a06 ("PCI/DPC: Quirk PIO log size for Intel Ice Lake Root Ports") add quirks for Ice, Tiger and Alder Lake Root Ports. System firmware for Raptor Lake still has the bug, so Linux logs the warning below on several Raptor Lake systems like Dell Precision 3581 with Intel Raptor Lake processor (0W18NX) system firmware/BIOS version 1.10.1. pci 0000:00:07.0: [8086:a76e] type 01 class 0x060400 pci 0000:00:07.0: DPC: RP PIO log size 0 is invalid pci 0000:00:07.1: [8086:a73f] type 01 class 0x060400 pci 0000:00:07.1: DPC: RP PIO log size 0 is invalid Apply the quirk for Raptor Lake Root Ports as well. This also enables the DPC driver to dump the RP PIO Log registers when DPC is triggered. Link: https://lore.kernel.org/r/20240305113057.56468-1-pmenzel@molgen.mpg.de Reported-by: Niels van Aert <nvaert1986@hotmail.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218560 Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: <stable@vger.kernel.org> Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Niels van Aert <nvaert1986@hotmail.com>
2024-02-29PCI: Mark LSI FW643 to avoid bus resetEdmund Raile
Apparently the LSI / Agere FW643 can't recover after a Secondary Bus Reset and requires a power-off or suspend/resume and rescan. VFIO resets a device before assigning it to a VM, and the FW643 doesn't support any other reset methods, so this problem prevented assignment of FW643 to VMs. Prevent use of Secondary Bus Reset for this device. With this change, the FW643 can be assigned to VMs with VFIO. Note that it will not be reset, resulting in leaking state between VMs and host. Link: https://lore.kernel.org/r/20240227131401.17913-1-edmund.raile@proton.me Signed-off-by: Edmund Raile <edmund.raile@proton.me> [bhelgaas: commit log, comment] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2024-02-20PCI: Mark 3ware-9650SE Root Port Extended Tags as brokenJörg Wedekind
Per PCIe r6.1, sec 2.2.6.2 and 7.5.3.4, a Requester may not use 8-bit Tags unless its Extended Tag Field Enable is set, but all Receivers/Completers must handle 8-bit Tags correctly regardless of their Extended Tag Field Enable. Some devices do not handle 8-bit Tags as Completers, so add a quirk for them. If we find such a device, we disable Extended Tags for the entire hierarchy to make peer-to-peer DMA possible. The 3ware 9650SE seems to have issues with handling 8-bit tags. Mark it as broken. This fixes PCI Parity Errors like : 3w-9xxx: scsi0: ERROR: (0x06:0x000C): PCI Parity Error: clearing. 3w-9xxx: scsi0: ERROR: (0x06:0x000D): PCI Abort: clearing. 3w-9xxx: scsi0: ERROR: (0x06:0x000E): Controller Queue Error: clearing. 3w-9xxx: scsi0: ERROR: (0x06:0x0010): Microcontroller Error: clearing. Link: https://lore.kernel.org/r/20240219132811.8351-1-joerg@wedekind.de Fixes: 60db3a4d8cc9 ("PCI: Enable PCIe Extended Tags if supported") Closes: https://bugzilla.kernel.org/show_bug.cgi?id=202425 Signed-off-by: Jörg Wedekind <joerg@wedekind.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2024-01-17Merge tag 'pci-v6.8-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci Pull pci updates from Bjorn Helgaas: "Enumeration: - Reserve ECAM so we don't assign it to PCI BARs; this works around bugs where BIOS included ECAM in a PNP0A03 host bridge window, didn't reserve it via a PNP0C02 motherboard device, and didn't allocate space for SR-IOV VF BARs (Bjorn Helgaas) - Add MMCONFIG/ECAM debug logging (Bjorn Helgaas) - Rename 'MMCONFIG' to 'ECAM' to match spec usage (Bjorn Helgaas) - Log device type (Root Port, Switch Port, etc) during enumeration (Bjorn Helgaas) - Log bridges before downstream devices so the dmesg order is more logical (Bjorn Helgaas) - Log resource names (BAR 0, VF BAR 0, bridge window, etc) consistently instead of a mix of names and "reg 0x10" (Puranjay Mohan, Bjorn Helgaas) - Fix 64GT/s effective data rate calculation to use 1b/1b encoding rather than the 8b/10b or 128b/130b used by lower rates (Ilpo Järvinen) - Use PCI_HEADER_TYPE_* instead of literals in x86, powerpc, SCSI lpfc (Ilpo Järvinen) - Clean up open-coded PCIBIOS return code mangling (Ilpo Järvinen) Resource management: - Restructure pci_dev_for_each_resource() to avoid computing the address of an out-of-bounds array element (the bounds check was performed later so the element was never actually *read*, but it's nicer to avoid even computing an out-of-bounds address) (Andy Shevchenko) Driver binding: - Convert pci-host-common.c platform .remove() callback to .remove_new() returning 'void' since it's not useful to return error codes here (Uwe Kleine-König) - Convert exynos, keystone, kirin from .remove() to .remove_new(), which returns void instead of int (Uwe Kleine-König) - Drop unused struct pci_driver.node member (Mathias Krause) Virtualization: - Add ACS quirk for more Zhaoxin Root Ports (LeoLiuoc) Error handling: - Log AER errors as "Correctable" (not "Corrected") or "Uncorrectable" to match spec terminology (Bjorn Helgaas) - Decode Requester ID when no error info found instead of printing the raw hex value (Bjorn Helgaas) Endpoint framework: - Use a unique test pattern for each BAR in the pci_endpoint_test to make it easier to debug address translation issues (Niklas Cassel) Broadcom STB PCIe controller driver: - Add DT property "brcm,clkreq-mode" and driver support for different CLKREQ# modes to make ASPM L1.x states possible (Jim Quinlan) Freescale Layerscape PCIe controller driver: - Add suspend/resume support for Layerscape LS1043a and LS1021a, including software-managed PME_Turn_Off and transitions between L0, L2/L3_Ready Link states (Frank Li) MediaTek PCIe controller driver: - Clear MSI interrupt status before handler to avoid missing MSIs that occur after the handler (qizhong cheng) MediaTek PCIe Gen3 controller driver: - Update mediatek-gen3 translation window setup to handle MMIO space that is not a power of two in size (Jianjun Wang) Qualcomm PCIe controller driver: - Increase qcom iommu-map maxItems to accommodate SDX55 (five entries) and SDM845 (sixteen entries) (Krzysztof Kozlowski) - Describe qcom,pcie-sc8180x clocks and resets accurately (Krzysztof Kozlowski) - Describe qcom,pcie-sm8150 clocks and resets accurately (Krzysztof Kozlowski) - Correct the qcom "reset-name" property, previously incorrectly called "reset-names" (Krzysztof Kozlowski) - Document qcom,pcie-sm8650, based on qcom,pcie-sm8550 (Neil Armstrong) Renesas R-Car PCIe controller driver: - Replace of_device.h with explicit of.h include to untangle header usage (Rob Herring) - Add DT and driver support for optional miniPCIe 1.5v and 3.3v regulators on KingFisher (Wolfram Sang) SiFive FU740 PCIe controller driver: - Convert fu740 CONFIG_PCIE_FU740 dependency from SOC_SIFIVE to ARCH_SIFIVE (Conor Dooley) Synopsys DesignWare PCIe controller driver: - Align iATU mapping for endpoint MSI-X (Niklas Cassel) - Drop "host_" prefix from struct dw_pcie_host_ops members (Yoshihiro Shimoda) - Drop "ep_" prefix from struct dw_pcie_ep_ops members (Yoshihiro Shimoda) - Rename struct dw_pcie_ep_ops.func_conf_select() to .get_dbi_offset() to be more descriptive (Yoshihiro Shimoda) - Add Endpoint DBI accessors to encapsulate offset lookups (Yoshihiro Shimoda) TI J721E PCIe driver: - Add j721e DT and driver support for 'num-lanes' for devices that support x1, x2, or x4 Links (Matt Ranostay) - Add j721e DT compatible strings and driver support for j784s4 (Matt Ranostay) - Make TI J721E Kconfig depend on ARCH_K3 since the hardware is specific to those TI SoC parts (Peter Robinson) TI Keystone PCIe controller driver: - Hold power management references to all PHYs while enabling them to avoid a race when one provides clocks to others (Siddharth Vadapalli) Xilinx XDMA PCIe controller driver: - Remove redundant dev_err(), since platform_get_irq() and platform_get_irq_byname() already log errors (Yang Li) - Fix uninitialized symbols in xilinx_pl_dma_pcie_setup_irq() (Krzysztof Wilczyński) - Fix xilinx_pl_dma_pcie_init_irq_domain() error return when irq_domain_add_linear() fails (Harshit Mogalapalli) MicroSemi Switchtec management driver: - Do dma_mrpc cleanup during switchtec_pci_remove() to match its devm ioremapping in switchtec_pci_probe(). Previously the cleanup was done in stdev_release(), which used stale pointers if stdev->cdev happened to be open when the PCI device was removed (Daniel Stodden) Miscellaneous: - Convert interrupt terminology from "legacy" to "INTx" to be more specific and match spec terminology (Damien Le Moal) - In dw-xdata-pcie, pci_endpoint_test, and vmd, replace usage of deprecated ida_simple_*() API with ida_alloc() and ida_free() (Christophe JAILLET)" * tag 'pci-v6.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (97 commits) PCI: Fix kernel-doc issues PCI: brcmstb: Configure HW CLKREQ# mode appropriate for downstream device dt-bindings: PCI: brcmstb: Add property "brcm,clkreq-mode" PCI: mediatek-gen3: Fix translation window size calculation PCI: mediatek: Clear interrupt status before dispatching handler PCI: keystone: Fix race condition when initializing PHYs PCI: xilinx-xdma: Fix error code in xilinx_pl_dma_pcie_init_irq_domain() PCI: xilinx-xdma: Fix uninitialized symbols in xilinx_pl_dma_pcie_setup_irq() PCI: rcar-gen4: Fix -Wvoid-pointer-to-enum-cast error PCI: iproc: Fix -Wvoid-pointer-to-enum-cast warning PCI: dwc: Add dw_pcie_ep_{read,write}_dbi[2] helpers PCI: dwc: Rename .func_conf_select to .get_dbi_offset in struct dw_pcie_ep_ops PCI: dwc: Rename .ep_init to .init in struct dw_pcie_ep_ops PCI: dwc: Drop host prefix from struct dw_pcie_host_ops members misc: pci_endpoint_test: Use a unique test pattern for each BAR PCI: j721e: Make TI J721E depend on ARCH_K3 PCI: j721e: Add TI J784S4 PCIe configuration PCI/AER: Use explicit register sizes for struct members PCI/AER: Decode Requester ID when no error info found PCI/AER: Use 'Correctable' and 'Uncorrectable' spec terms for errors ...
2024-01-15Merge branch 'pci/virtualization'Bjorn Helgaas
- Add ACS quirk for more Zhaoxin Root Ports (LeoLiuoc) * pci/virtualization: PCI: Add ACS quirk for more Zhaoxin Root Ports
2024-01-15Merge branch 'pci/enumeration-logging'Bjorn Helgaas
- Log device type (Root Port, Switch Port, etc) during enumeration (Bjorn Helgaas) - Log resource names (BAR 0, VF BAR 0, bridge window, etc) consistently instead of a mix of names and "reg 0x10" (Puranjay Mohan, Bjorn Helgaas) - Log bridges before devices below the bridges (Bjorn Helgaas) * pci/enumeration-logging: PCI: Log bridge info when first enumerating bridge PCI: Log bridge windows conditionally PCI: Supply bridge device, not secondary bus, to read window details PCI: Move pci_read_bridge_windows() below individual window accessors PCI: Use resource names in PCI log messages PCI: Update BAR # and window messages PCI: Log device type during enumeration
2023-12-15PCI: Use resource names in PCI log messagesPuranjay Mohan
Use the pci_resource_name() to get the name of the resource and use it while printing log messages. [bhelgaas: rename to match struct resource * names, also use names in other BAR messages] Link: https://lore.kernel.org/r/20211106112606.192563-3-puranjay12@gmail.com Signed-off-by: Puranjay Mohan <puranjay12@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2023-12-11PCI: Add ACS quirk for more Zhaoxin Root PortsLeoLiuoc
Add more Root Port Device IDs to pci_quirk_zhaoxin_pcie_ports_acs() for some new Zhaoxin platforms. Fixes: 299bd044a6f3 ("PCI: Add ACS quirk for Zhaoxin Root/Downstream Ports") Link: https://lore.kernel.org/r/20231211091543.735903-1-LeoLiu-oc@zhaoxin.com Signed-off-by: LeoLiuoc <LeoLiu-oc@zhaoxin.com> [bhelgaas: update subject, drop changelog, add Fixes, add stable tag, fix whitespace, wrap code comment] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: <stable@vger.kernel.org> # 5.7
2023-11-20PCI: Only override AMD USB controller if requiredGuilherme G. Piccoli
By running a Van Gogh device (Steam Deck), the following message was noticed in the kernel log: pci 0000:04:00.3: PCI class overridden (0x0c03fe -> 0x0c03fe) so dwc3 driver can claim this instead of xhci Effectively this means the quirk executed but changed nothing, since the class of this device was already the proper one (likely adjusted by newer firmware versions). Check and perform the override only if necessary. Link: https://lore.kernel.org/r/20231120160531.361552-1-gpiccoli@igalia.com Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Huang Rui <ray.huang@amd.com> Cc: Vicki Pfau <vi@endrift.com>
2023-11-18PCI: Add no PM reset quirk for NVIDIA Spectrum devicesIdo Schimmel
Spectrum-{1,2,3,4} devices report that a D3hot->D0 transition causes a reset (i.e., they advertise NoSoftRst-). However, this transition does not have any effect on the device: It continues to be operational and network ports remain up. Advertising this support makes it seem as if a PM reset is viable for these devices. Mark it as unavailable to skip it when testing reset methods. Before: # cat /sys/bus/pci/devices/0000\:03\:00.0/reset_method pm bus After: # cat /sys/bus/pci/devices/0000\:03\:00.0/reset_method bus Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-28Merge branch 'pci/misc'Bjorn Helgaas
- Prevent xHCI driver from claiming AMD VanGogh USB3 DRD device so dwc3 can claim it instead (Vicki Pfau) - Make pci_assign_unassigned_resources() non-init because sparc uses it after init-time (Randy Dunlap) - Remove logic_outb(), _outw(), outl() duplicate declarations (John Sanpe) - Remove unnecessary UTF-8 in Kconfig help text that confuses menuconfig (Liu Song) - Fix double free in __pci_epc_create() (Dan Carpenter) - Simplify pcie_capability_clear_and_set_word() cases that could be pcie_capability_clear_word() (Ilpo Järvinen) * pci/misc: PCI: Simplify pcie_capability_clear_and_set_word() to ..._clear_word() PCI: endpoint: Fix double free in __pci_epc_create() PCI: Replace unnecessary UTF-8 in Kconfig logic_pio: Remove logic_outb(), _outw(), outl() duplicate declarations PCI: Make pci_assign_unassigned_resources() non-init PCI: Prevent xHCI driver from claiming AMD VanGogh USB3 DRD device
2023-10-28Merge branch 'pci/field-get'Bjorn Helgaas
- Use FIELD_GET()/FIELD_PREP() when possible throughout drivers/pci/ (Ilpo Järvinen, Bjorn Helgaas) - Rework DPC control programming for clarity (Ilpo Järvinen) * pci/field-get: PCI/portdrv: Use FIELD_GET() PCI/VC: Use FIELD_GET() PCI/PTM: Use FIELD_GET() PCI/PME: Use FIELD_GET() PCI/ATS: Use FIELD_GET() PCI/ATS: Show PASID Capability register width in bitmasks PCI: Use FIELD_GET() in Sapphire RX 5600 XT Pulse quirk PCI: Use FIELD_GET() PCI/MSI: Use FIELD_GET/PREP() PCI/DPC: Use defines with DPC reason fields PCI/DPC: Use defined fields with DPC_CTL register PCI/DPC: Use FIELD_GET() PCI: hotplug: Use FIELD_GET/PREP() PCI: dwc: Use FIELD_GET/PREP() PCI: cadence: Use FIELD_GET() PCI: Use FIELD_GET() to extract Link Width PCI: mvebu: Use FIELD_PREP() with Link Width PCI: tegra194: Use FIELD_GET()/FIELD_PREP() with Link Width fields # Conflicts: # drivers/pci/controller/dwc/pcie-tegra194.c
2023-10-28Merge branch 'pci/config-errs'Bjorn Helgaas
- Simplify config accessor error checking (Ilpo Järvinen) * pci/config-errs: scsi: ipr: Do PCI error checks on own line PCI: xgene: Do PCI error check on own line & keep return value PCI: Do error check on own line to split long "if" conditions atm: iphase: Do PCI error checks on own line sh: pci: Do PCI error check on own line alpha: Streamline convoluted PCI error handling
2023-10-28Merge branch 'pci/reset'Bjorn Helgaas
- Lengthen reset delay for VideoPropulsion Torrent QN16e card, which seems to require longer delay than spec requires (Lukas Wunner) * pci/reset: PCI: Lengthen reset delay for VideoPropulsion Torrent QN16e card
2023-10-28Merge branch 'pci/enumeration'Bjorn Helgaas
- Add and use pci_get_base_class() to search for all PCI_BASE_CLASS_DISPLAY devices (Sui Jingfeng) - Fix a vmd check for multi-function devices (Ilpo Järvinen) - Add PCI_HEADER_TYPE_MFD and use it to replace literals (Ilpo Järvinen) - Use acpi_evaluate_dsm_typed() instead of open-coding it (Andy Shevchenko) - Keep .remove() and .probe() callbacks (previously marked __init) in case they're used via sysfs (Uwe Kleine-König) * pci/enumeration: PCI: keystone: Don't discard .probe() callback PCI: keystone: Don't discard .remove() callback PCI: kirin: Don't discard .remove() callback PCI: exynos: Don't discard .remove() callback PCI/ACPI: Use acpi_evaluate_dsm_typed() PCI: Use PCI_HEADER_TYPE_* instead of literals PCI: Add PCI_HEADER_TYPE_MFD definition PCI: vmd: Correct PCI Header Type Register's multi-function check drm/radeon: Use pci_get_base_class() to reduce duplicated code drm/amdgpu: Use pci_get_base_class() to reduce duplicated code drm/nouveau: Use pci_get_base_class() to reduce duplicated code ALSA: hda: Use pci_get_base_class() to reduce duplicated code PCI: Add pci_get_base_class() helper
2023-10-26PCI: Simplify pcie_capability_clear_and_set_word() to ..._clear_word()Ilpo Järvinen
When using pcie_capability_clear_and_set_word() but not actually *setting* anything, use pcie_capability_clear_word() instead. Link: https://lore.kernel.org/r/20231026121924.2164-1-ilpo.jarvinen@linux.intel.com Link: https://lore.kernel.org/r/20231026121924.2164-2-ilpo.jarvinen@linux.intel.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> [bhelgaas: squash] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2023-10-24PCI/DPC: Use FIELD_GET()Bjorn Helgaas
Use FIELD_GET() to remove dependencies on the field position, i.e., the shift value. No functional change intended. Link: https://lore.kernel.org/r/20231018113254.17616-5-ilpo.jarvinen@linux.intel.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2023-10-18PCI: Disable ATS for specific Intel IPU E2000 devicesBartosz Pawlowski
Due to a hardware issue in A and B steppings of Intel IPU E2000, it expects wrong endianness in ATS invalidation message body. This problem can lead to outdated translations being returned as valid and finally cause system instability. To prevent such issues, add quirk_intel_e2000_no_ats() to disable ATS for vulnerable IPU E2000 devices. Link: https://lore.kernel.org/r/20230908143606.685930-3-bartosz.pawlowski@intel.com Signed-off-by: Bartosz Pawlowski <bartosz.pawlowski@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
2023-10-18PCI: Extract ATS disabling to a helper functionBartosz Pawlowski
Introduce quirk_no_ats() helper function to provide a standard way to disable ATS capability in PCI quirks. Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230908143606.685930-2-bartosz.pawlowski@intel.com Signed-off-by: Bartosz Pawlowski <bartosz.pawlowski@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2023-10-10PCI: Do error check on own line to split long "if" conditionsIlpo Järvinen
Placing PCI error code check inside "if" condition usually results in need to split lines. Combined with additional conditions the "if" condition becomes messy. Convert to the usual error handling pattern with an additional variable to improve code readability. In addition, reverse the logic in pci_find_vsec_capability() to get rid of &&. No functional changes intended. Link: https://lore.kernel.org/r/20230911125354.25501-5-ilpo.jarvinen@linux.intel.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> [bhelgaas: PCI_POSSIBLE_ERROR()] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2023-10-05PCI: Prevent xHCI driver from claiming AMD VanGogh USB3 DRD deviceVicki Pfau
The AMD VanGogh SoC contains a DesignWare USB3 Dual-Role Device that can be operated as either a USB Host or a USB Device, similar to on the AMD Nolan platform. be6646bfbaec ("PCI: Prevent xHCI driver from claiming AMD Nolan USB3 DRD device") added a quirk to let the dwc3 driver claim the Nolan device since it provides more specific support. Extend that quirk to include the VanGogh SoC USB3 device. Link: https://lore.kernel.org/r/20230927202212.2388216-1-vi@endrift.com Signed-off-by: Vicki Pfau <vi@endrift.com> [bhelgaas: include be6646bfbaec reference, add stable tag] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org # v3.19+
2023-10-03PCI: Use PCI_HEADER_TYPE_* instead of literalsIlpo Järvinen
Replace literals under drivers/pci/ with PCI_HEADER_TYPE_MASK, PCI_HEADER_TYPE_NORMAL, and PCI_HEADER_TYPE_MFD. Also replace !! boolean conversions with FIELD_GET(). Link: https://lore.kernel.org/r/20231003125300.5541-4-ilpo.jarvinen@linux.intel.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> # for Renesas R-Car
2023-09-28PCI: Lengthen reset delay for VideoPropulsion Torrent QN16e cardLukas Wunner
Commit ac91e6980563 ("PCI: Unify delay handling for reset and resume") shortened an unconditional 1 sec delay after a Secondary Bus Reset to 100 msec for PCIe (per PCIe r6.1 sec 6.6.1). The 1 sec delay is only required for Conventional PCI. But it turns out that there are PCIe devices which require a longer delay than prescribed before first config space access after reset recovery or resume from D3cold: Chad reports that a "VideoPropulsion Torrent QN16e" MPEG QAM Modulator "raises a PCI system error (PERR), as reported by the IPMI event log, and the hardware itself would suffer a catastrophic event, cycling the server" unless the longer delay is observed. The card is specified to conform to PCIe r1.0 and indeed only supports Gen1 speed (2.5 GT/s) according to lspci. PCIe r1.0 sec 7.6 prescribes the same 100 msec delay as PCIe r6.1 sec 6.6.1: To allow components to perform internal initialization, system software must wait for at least 100 ms from the end of a reset (cold/warm/hot) before it is permitted to issue Configuration Requests The behavior of the Torrent QN16e card thus appears to be a quirk. Treat it as such and lengthen the reset delay for this specific device. Fixes: ac91e6980563 ("PCI: Unify delay handling for reset and resume") Link: https://lore.kernel.org/r/47727e792c7f0282dc144e3ec8ce8eb6e713394e.1695304512.git.lukas@wunner.de Reported-by: Chad Schroeder <CSchroeder@sonifi.com> Closes: https://lore.kernel.org/linux-pci/DM6PR16MB2844903E34CAB910082DF019B1FAA@DM6PR16MB2844.namprd16.prod.outlook.com/ Tested-by: Chad Schroeder <CSchroeder@sonifi.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org # v5.4+
2023-09-08Revert "PCI: Mark NVIDIA T4 GPUs to avoid bus reset"Bjorn Helgaas
This reverts commit d5af729dc2071273f14cbb94abbc60608142fd83. d5af729dc207 ("PCI: Mark NVIDIA T4 GPUs to avoid bus reset") avoided Secondary Bus Reset on the T4 because the reset seemed to not work when the T4 was directly attached to a Root Port. But NVIDIA thinks the issue is probably related to some issue with the Root Port, not with the T4. The T4 provides neither PM nor FLR reset, so masking bus reset compromises this device for assignment scenarios. Revert d5af729dc207 as requested by Wu Zongyong. This will leave SBR broken in the specific configuration Wu tested, as it was in v6.5, so Wu will debug that further. Link: https://lore.kernel.org/r/ZPqMCDWvITlOLHgJ@wuzongyong-alibaba Link: https://lore.kernel.org/r/20230908201104.GA305023@bhelgaas Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2023-08-30Merge tag 'pci-v6.6-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Add locking to read/modify/write PCIe Capability Register accessors for Link Control and Root Control - Use pci_dev_id() when possible instead of manually composing ID from dev->bus->number and dev->devfn Resource management: - Move prototypes for __weak sysfs resource files to linux/pci.h to fix 'no previous prototype' warnings - Make more I/O port accesses depend on HAS_IOPORT - Use devm_platform_get_and_ioremap_resource() instead of open-coding platform_get_resource() followed by devm_ioremap_resource() Power management: - Ensure devices are powered up while accessing VPD - If device is powered-up, keep it that way while polling for PME - Only read PCI_PM_CTRL register when available, to avoid reading the wrong register and corrupting dev->current_state Virtualization: - Avoid Secondary Bus Reset on NVIDIA T4 GPUs Error handling: - Remove unused pci_disable_pcie_error_reporting() - Unexport pci_enable_pcie_error_reporting(), used only by aer.c - Unexport pcie_port_bus_type, used only by PCI core VGA: - Simplify and clean up typos in VGA arbiter Apple PCIe controller driver: - Initialize pcie->nvecs (number of available MSIs) before use Broadcom iProc PCIe controller driver: - Use of_property_read_bool() instead of low-level accessors for boolean properties Broadcom STB PCIe controller driver: - Assert PERST# when probing BCM2711 because some bootloaders don't do it Freescale i.MX6 PCIe controller driver: - Add .host_deinit() callback so we can clean up things like regulators on probe failure or driver unload Freescale Layerscape PCIe controller driver: - Add support for link-down notification so the endpoint driver can process LINK_DOWN events - Add suspend/resume support, including manual PME_Turn_off/PME_TO_Ack handshake - Save Link Capabilities during probe so they can be restored when handling a link-up event, since the controller loses the Link Width and Link Speed values during reset Intel VMD host bridge driver: - Fix disable of bridge windows during domain reset; previously we cleared the base/limit registers, which actually left the windows enabled Marvell MVEBU PCIe controller driver: - Remove unused busn member Microchip PolarFlare PCIe controller driver: - Fix interrupt bit definitions so the SEC and DED interrupt handlers work correctly - Make driver buildable as a module - Read FPGA MSI configuration parameters from hardware instead of hard-coding them Microsoft Hyper-V host bridge driver: - To avoid a NULL pointer dereference, skip MSI restore after hibernate if MSI/MSI-X hasn't been enabled NVIDIA Tegra194 PCIe controller driver: - Revert 'PCI: tegra194: Enable support for 256 Byte payload' because Linux doesn't know how to reduce MPS from to 256 to 128 bytes for endpoints below a switch (because other devices below the switch might already be operating), which leads to 'Malformed TLP' errors Qualcomm PCIe controller driver: - Add DT and driver support for interconnect bandwidth voting for 'pcie-mem' and 'cpu-pcie' interconnects - Fix broken SDX65 'compatible' DT property - Configure controller so MHI bus master clock will be switched off while in ASPM L1.x states - Use alignment restriction from EPF core in EPF MHI driver - Add Endpoint eDMA support - Add MHI eDMA support - Add Snapdragon SM8450 support to the EPF MHI driversupport - Add MHI eDMA support - Add Snapdragon SM8450 support to the EPF MHI driversupport - Add MHI eDMA support - Add Snapdragon SM8450 support to the EPF MHI driversupport - Add MHI eDMA support - Add Snapdragon SM8450 support to the EPF MHI driver - Use iATU for EPF MHI transfers smaller than 4K to avoid eDMA setup latency - Add sa8775p DT binding and driver support Rockchip PCIe controller driver: - Use 64-bit mask on MSI 64-bit PCI address to avoid zeroing out the upper 32 bits SiFive FU740 PCIe controller driver: - Set the supported number of MSI vectors so we can use all available MSI interrupts Synopsys DesignWare PCIe controller driver: - Add generic dwc suspend/resume APIs (dw_pcie_suspend_noirq() and dw_pcie_resume_noirq()) to be called by controller driver suspend/resume ops, and a controller callback to send PME_Turn_Off MicroSemi Switchtec management driver: - Add support for PCIe Gen5 devices Miscellaneous: - Reorder and compress to reduce size of struct pci_dev - Fix race in DOE destroy_work_on_stack() - Add stubs to avoid casts between incompatible function types - Explicitly include correct DT includes to untangle headers" * tag 'pci-v6.6-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (96 commits) PCI: qcom-ep: Add ICC bandwidth voting support dt-bindings: PCI: qcom: ep: Add interconnects path PCI: qcom-ep: Treat unknown IRQ events as an error dt-bindings: PCI: qcom: Fix SDX65 compatible PCI: endpoint: Add kernel-doc for pci_epc_mem_init() API PCI: epf-mhi: Use iATU for small transfers PCI: epf-mhi: Add support for SM8450 PCI: epf-mhi: Add eDMA support PCI: qcom-ep: Add eDMA support PCI: epf-mhi: Make use of the alignment restriction from EPF core PCI/PM: Only read PCI_PM_CTRL register when available PCI: qcom: Add support for sa8775p SoC dt-bindings: PCI: qcom: Add sa8775p compatible PCI: qcom-ep: Pass alignment restriction to the EPF core PCI: Simplify pcie_capability_clear_and_set_word() control flow PCI: Tidy config space save/restore messages PCI: Fix code formatting inconsistencies PCI: Fix typos in docs and comments PCI: Fix pci_bus_resetable(), pci_slot_resetable() name typos PCI: Simplify pci_dev_driver() ...
2023-08-29Merge branch 'pci/misc'Bjorn Helgaas
- Reorder struct pci_dev to avoid holes and reduce size (Christophe JAILLET) - Change pdev->rom_attr_enabled to single bit since it's only a boolean value (Christophe JAILLET) - Use struct_size() in pirq_convert_irt_table() instead of hand-writing it (Christophe JAILLET) - Explicitly include correct DT includes to untangle headers (Rob Herring) - Fix a DOE race between destroy_work_on_stack() and the stack-allocated task->work struct going out of scope in pci_doe() (Ira Weiny) - Use pci_dev_id() when possible instead of manually composing ID from dev->bus->number and dev->devfn (Xiongfeng Wang, Zheng Zengkai) - Move pci_create_resource_files() declarations to linux/pci.h for alpha build warnings (Arnd Bergmann) - Remove unused hotplug function declarations (Yue Haibing) - Remove unused mvebu struct mvebu_pcie.busn (Pali Rohár) - Unexport pcie_port_bus_type (Bjorn Helgaas) - Remove unnecessary sysfs ID local variable initialization (Bjorn Helgaas) - Fix BAR value printk formatting to accommodate 32-bit values (Bjorn Helgaas) - Use consistent pointer types for config access syscall get_user() and put_user() uses (Bjorn Helgaas) - Simplify AER_RECOVER_RING_SIZE definition (Bjorn Helgaas) - Simplify pci_pio_to_address() (Bjorn Helgaas) - Simplify pci_dev_driver() (Bjorn Helgaas) - Fix pci_bus_resetable(), pci_slot_resetable() name typos (Bjorn Helgaas) - Fix code and doc typos and code formatting (Bjorn Helgaas) - Tidy config space save/restore messages (Bjorn Helgaas) * pci/misc: PCI: Tidy config space save/restore messages PCI: Fix code formatting inconsistencies PCI: Fix typos in docs and comments PCI: Fix pci_bus_resetable(), pci_slot_resetable() name typos PCI: Simplify pci_dev_driver() PCI: Simplify pci_pio_to_address() PCI/AER: Simplify AER_RECOVER_RING_SIZE definition PCI: Use consistent put_user() pointer types PCI: Fix printk field formatting PCI: Remove unnecessary initializations PCI: Unexport pcie_port_bus_type PCI: mvebu: Remove unused busn member PCI: Remove unused function declarations PCI/sysfs: Move declarations to linux/pci.h PCI/P2PDMA: Use pci_dev_id() to simplify the code PCI/IOV: Use pci_dev_id() to simplify the code PCI/AER: Use pci_dev_id() to simplify the code PCI: apple: Use pci_dev_id() to simplify the code PCI/DOE: Fix destroy_work_on_stack() race PCI: Explicitly include correct DT includes x86/PCI: Use struct_size() in pirq_convert_irt_table() PCI: Change pdev->rom_attr_enabled to single bit PCI: Reorder pci_dev fields to reduce holes
2023-08-29Merge branch 'pci/controller/switchtec'Bjorn Helgaas
- Add support for Switechtec PCIe Gen5 devices (Kelvin Cao) * pci/controller/switchtec: PCI: switchtec: Add support for PCIe Gen5 devices PCI: switchtec: Use normal comment style
2023-08-29Merge branch 'pci/virtualization'Bjorn Helgaas
- Avoid bus resets on NVIDIA T4 GPUs because they don't seem to recover (Wu Zongyong) * pci/virtualization: PCI: Mark NVIDIA T4 GPUs to avoid bus reset
2023-08-25PCI: Fix typos in docs and commentsBjorn Helgaas
Fix typos in docs and comments. Link: https://lore.kernel.org/r/20230824193712.542167-11-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2023-08-22of: unittest: Add pci_dt_testdrv pci driverLizhi Hou
pci_dt_testdrv is bound to QEMU PCI Test Device. It reads overlay_pci_node fdt fragment and apply it to Test Device. Then it calls of_platform_default_populate() to populate the platform devices. Tested-by: Herve Codina <herve.codina@bootlin.com> Signed-off-by: Lizhi Hou <lizhi.hou@amd.com> Link: https://lore.kernel.org/r/1692120000-46900-6-git-send-email-lizhi.hou@amd.com Signed-off-by: Rob Herring <robh@kernel.org>
2023-08-22PCI: Add quirks to generate device tree node for Xilinx Alveo U50Lizhi Hou
The Xilinx Alveo U50 PCI card exposes multiple hardware peripherals on its PCI BAR. The card firmware provides a flattened device tree to describe the hardware peripherals on its BARs. This allows U50 driver to load the flattened device tree and generate the device tree node for hardware peripherals underneath. To generate device tree node for U50 card, add PCI quirks to call of_pci_make_dev_node() for U50. Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Lizhi Hou <lizhi.hou@amd.com> Link: https://lore.kernel.org/r/1692120000-46900-4-git-send-email-lizhi.hou@amd.com Signed-off-by: Rob Herring <robh@kernel.org>
2023-08-09PCI: Mark NVIDIA T4 GPUs to avoid bus resetWu Zongyong
NVIDIA T4 GPUs do not work with SBR. This problem is found when the T4 card is direct attached to a Root Port only. Avoid bus reset by marking T4 GPUs PCI_DEV_FLAGS_NO_BUS_RESET. Fixes: 4c207e7121fa ("PCI: Mark some NVIDIA GPUs to avoid bus reset") Link: https://lore.kernel.org/r/2dcebea53a6eb9bd212ec6d8974af2e5e0333ef6.1681129861.git.wuzongyong@linux.alibaba.com Signed-off-by: Wu Zongyong <wuzongyong@linux.alibaba.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-02 08:05:06 +0000