summaryrefslogtreecommitdiff
path: root/drivers/pci/quirks.c
AgeCommit message (Collapse)Author
2022-01-27PCI: Add function 1 DMA alias quirk for Marvell 88SE9125 SATA controllerYifeng Li
commit e445375882883f69018aa669b67cbb37ec873406 upstream. Like other SATA controller chips in the Marvell 88SE91xx series, the Marvell 88SE9125 has the same DMA requester ID hardware bug that prevents it from working under IOMMU. Add it to the list of devices that need the quirk. Without this patch, device initialization fails with DMA errors: ata8: softreset failed (1st FIS failed) DMAR: DRHD: handling fault status reg 2 DMAR: [DMA Write NO_PASID] Request device [03:00.1] fault addr 0xfffc0000 [fault reason 0x02] Present bit in context entry is clear DMAR: DRHD: handling fault status reg 2 DMAR: [DMA Read NO_PASID] Request device [03:00.1] fault addr 0xfffc0000 [fault reason 0x02] Present bit in context entry is clear After applying the patch, the controller can be successfully initialized: ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 330) ata8.00: ATAPI: PIONEER BD-RW BDR-207M, 1.21, max UDMA/100 ata8.00: configured for UDMA/100 scsi 7:0:0:0: CD-ROM PIONEER BD-RW BDR-207M 1.21 PQ: 0 ANSI: 5 Link: https://lore.kernel.org/r/YahpKVR+McJVDdkD@work Reported-by: Sam Bingner <sam@bingner.com> Tested-by: Sam Bingner <sam@bingner.com> Tested-by: Yifeng Li <tomli@tomli.me> Signed-off-by: Yifeng Li <tomli@tomli.me> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Krzysztof Wilczyński <kw@linux.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-26PCI: Add MSI masking quirk for Nvidia ION AHCIMarc Zyngier
commit f21082fb20dbfb3e42b769b59ef21c2a7f2c7c1f upstream. The ION AHCI device pretends that MSI masking isn't a thing, while it actually implements it and needs MSIs to be unmasked to work. Add a quirk to that effect. Reported-by: Rui Salvaterra <rsalvaterra@gmail.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Rui Salvaterra <rsalvaterra@gmail.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Bjorn Helgaas <helgaas@kernel.org> Link: https://lore.kernel.org/r/CALjTZvbzYfBuLB+H=fj2J+9=DxjQ2Uqcy0if_PvmJ-nU-qEgkg@mail.gmail.com Link: https://lore.kernel.org/r/20211104180130.3825416-3-maz@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-26PCI: Mark Atheros QCA6174 to avoid bus resetIngmar Klein
commit e3f4bd3462f6f796594ecc0dda7144ed2d1e5a26 upstream. When passing the Atheros QCA6174 through to a virtual machine, the VM hangs at the point where the ath10k driver loads. Add a quirk to avoid bus resets on this device, which avoids the hang. [bhelgaas: commit log] Link: https://lore.kernel.org/r/08982e05-b6e8-5a8d-24ab-da1488ee50a8@web.de Signed-off-by: Ingmar Klein <ingmar_klein@web.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Pali Rohár <pali@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-22PCI: Add ACS quirks for Cavium multi-function devicesGeorge Cherian
[ Upstream commit 32837d8a8f63eb95dcb9cd005524a27f06478832 ] Some Cavium endpoints are implemented as multi-function devices without ACS capability, but they actually don't support peer-to-peer transactions. Add ACS quirks to declare DMA isolation for the following devices: - BGX device found on Octeon-TX (8xxx) - CGX device found on Octeon-TX2 (9xxx) - RPM device found on Octeon-TX3 (10xxx) Link: https://lore.kernel.org/r/20210810122425.1115156-1-george.cherian@marvell.com Signed-off-by: George Cherian <george.cherian@marvell.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-22PCI: Add AMD GPU multi-function power dependenciesEvan Quan
commit 60b78ed088ebe1a872ee1320b6c5ad6ee2c4bd9a upstream. Some AMD GPUs have built-in USB xHCI and USB Type-C UCSI controllers with power dependencies between the GPU and the other functions as in 6d2e369f0d4c ("PCI: Add NVIDIA GPU multi-function power dependencies"). Add device link support for the AMD integrated USB xHCI and USB Type-C UCSI controllers. Without this, runtime power management, including GPU resume and temp and fan sensors don't work correctly. Reported-at: https://gitlab.freedesktop.org/drm/amd/-/issues/1704 Link: https://lore.kernel.org/r/20210903063311.3606226-1-evan.quan@amd.com Signed-off-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-22PCI: Restrict ASMedia ASM1062 SATA Max Payload Size SupportedMarek Behún
commit b12d93e9958e028856cbcb061b6e64728ca07755 upstream. The ASMedia ASM1062 SATA controller advertises Max_Payload_Size_Supported of 512, but in fact it cannot handle incoming TLPs with payload size of 512. We discovered this issue on PCIe controllers capable of MPS = 512 (Aardvark and DesignWare), where the issue presents itself as an External Abort. Bjorn Helgaas says: Probably ASM1062 reports a Malformed TLP error when it receives a data payload of 512 bytes, and Aardvark, DesignWare, etc convert this to an arm64 External Abort. [1] To avoid this problem, limit the ASM1062 Max Payload Size Supported to 256 bytes, so we set the Max Payload Size of devices that may send TLPs to the ASM1062 to 256 or less. [1] https://lore.kernel.org/linux-pci/20210601170907.GA1949035@bjorn-Precision-5520/ BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=212695 Link: https://lore.kernel.org/r/20210624171418.27194-2-kabel@kernel.org Reported-by: Rötti <espressobinboardarmbiantempmailaddress@posteo.de> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Krzysztof Wilczyński <kw@linux.com> Reviewed-by: Pali Rohár <pali@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-22PCI: Call Max Payload Size-related fixup quirks earlyMarek Behún
commit b8da302e2955fe4d41eb9d48199242674d77dbe0 upstream. pci_device_add() calls HEADER fixups after pci_configure_device(), which configures Max Payload Size. Convert MPS-related fixups to EARLY fixups so pci_configure_mps() takes them into account. Fixes: 27d868b5e6cfa ("PCI: Set MPS to match upstream bridge") Link: https://lore.kernel.org/r/20210624171418.27194-1-kabel@kernel.org Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-26PCI: Increase D3 delay for AMD Renoir/Cezanne XHCIMarcin Bachry
[ Upstream commit e0bff43220925b7e527f9d3bc9f5c624177c959e ] The Renoir XHCI controller apparently doesn't resume reliably with the standard D3hot-to-D0 delay. Increase it to 20ms. [Alex: I talked to the AMD USB hardware team and the AMD Windows team and they are not aware of any HW errata or specific issues. The HW works fine in Windows. I was told Windows uses a rather generous default delay of 100ms for PCI state transitions.] Link: https://lore.kernel.org/r/20210722025858.220064-1-alexander.deucher@amd.com Signed-off-by: Marcin Bachry <hegel666@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Prike Liang <prike.liang@amd.com> Cc: Shyam Sundar S K <shyam-sundar.s-k@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-28PCI: Mark AMD Navi14 GPU ATS as brokenEvan Quan
commit e8946a53e2a698c148b3b3ed732f43c7747fbeb6 upstream Observed unexpected GPU hang during runpm stress test on 0x7341 rev 0x00. Further debugging shows broken ATS is related. Disable ATS on this part. Similar issues on other devices: a2da5d8cc0b0 ("PCI: Mark AMD Raven iGPU ATS as broken in some platforms") 45beb31d3afb ("PCI: Mark AMD Navi10 GPU rev 0x00 ATS as broken") 5e89cd303e3a ("PCI: Mark AMD Navi14 GPU rev 0xc5 ATS as broken") Suggested-by: Alex Deucher <alexander.deucher@amd.com> Link: https://lore.kernel.org/r/20210602021255.939090-1-evan.quan@amd.com Signed-off-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Krzysztof Wilczyński <kw@linux.com> Cc: stable@vger.kernel.org [sudip: adjust context] Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-20PCI: Leave Apple Thunderbolt controllers on for s2idle or standbyKonstantin Kharlamov
commit 4694ae373dc2114f9a82f6ae15737e65af0c6dea upstream. On Macbook 2013, resuming from suspend-to-idle or standby resulted in the external monitor no longer being detected, a stacktrace, and errors like this in dmesg: pcieport 0000:06:00.0: can't change power state from D3hot to D0 (config space inaccessible) The reason is that we know how to turn power to the Thunderbolt controller *off* via the SXIO/SXFP/SXLF methods, but we don't know how to turn power back on. We have to rely on firmware to turn the power back on. When going to the "suspend-to-idle" or "standby" system sleep states, firmware is not involved either on the suspend side or the resume side, so we can't use SXIO/SXFP/SXLF to turn the power off. Skip SXIO/SXFP/SXLF when firmware isn't involved in suspend, e.g., when we're going to the "suspend-to-idle" or "standby" system sleep states. Fixes: 1df5172c5c25 ("PCI: Suspend/resume quirks for Apple thunderbolt") Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=212767 Link: https://lore.kernel.org/r/20210520235501.917397-1-Hi-Angel@yandex.ru Signed-off-by: Konstantin Kharlamov <Hi-Angel@yandex.ru> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Lukas Wunner <lukas@wunner.de> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-30PCI: Work around Huawei Intelligent NIC VF FLR erratumChiqijun
commit ce00322c2365e1f7b0312f2f493539c833465d97 upstream. pcie_flr() starts a Function Level Reset (FLR), waits 100ms (the maximum time allowed for FLR completion by PCIe r5.0, sec 6.6.2), and waits for the FLR to complete. It assumes the FLR is complete when a config read returns valid data. When we do an FLR on several Huawei Intelligent NIC VFs at the same time, firmware on the NIC processes them serially. The VF may respond to config reads before the firmware has completed its reset processing. If we bind a driver to the VF (e.g., by assigning the VF to a virtual machine) in the interval between the successful config read and completion of the firmware reset processing, the NIC VF driver may fail to load. Prevent this driver failure by waiting for the NIC firmware to complete its reset processing. Not all NIC firmware supports this feature. [bhelgaas: commit log] Link: https://support.huawei.com/enterprise/en/doc/EDOC1100063073/87950645/vm-oss-occasionally-fail-to-load-the-in200-driver-when-the-vf-performs-flr Link: https://lore.kernel.org/r/20210414132301.1793-1-chiqijun@huawei.com Signed-off-by: Chiqijun <chiqijun@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Alex Williamson <alex.williamson@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-30PCI: Add ACS quirk for Broadcom BCM57414 NICSriharsha Basavapatna
commit db2f77e2bd99dbd2fb23ddde58f0fae392fe3338 upstream. The Broadcom BCM57414 NIC may be a multi-function device. While it does not advertise an ACS capability, peer-to-peer transactions are not possible between the individual functions, so it is safe to treat them as fully isolated. Add an ACS quirk for this device so the functions can be in independent IOMMU groups and attached individually to userspace applications using VFIO. [bhelgaas: commit log] Link: https://lore.kernel.org/r/1621645997-16251-1-git-send-email-michael.chan@broadcom.com Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-30PCI: Mark some NVIDIA GPUs to avoid bus resetShanker Donthineni
commit 4c207e7121fa92b66bf1896bf8ccb9edfb0f9731 upstream. Some NVIDIA GPU devices do not work with SBR. Triggering SBR leaves the device inoperable for the current system boot. It requires a system hard-reboot to get the GPU device back to normal operating condition post-SBR. For the affected devices, enable NO_BUS_RESET quirk to avoid the issue. This issue will be fixed in the next generation of hardware. Link: https://lore.kernel.org/r/20210608054857.18963-8-ameynarkhede03@gmail.com Signed-off-by: Shanker Donthineni <sdonthineni@nvidia.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Sinan Kaya <okaya@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-30PCI: Mark TI C667X to avoid bus resetAntti Järvinen
commit b5cf198e74a91073d12839a3e2db99994a39995d upstream. Some TI KeyStone C667X devices do not support bus/hot reset. The PCIESS automatically disables LTSSM when Secondary Bus Reset is received and device stops working. Prevent bus reset for these devices. With this change, the device can be assigned to VMs with VFIO, but it will leak state between VMs. Reference: https://e2e.ti.com/support/processors/f/791/t/954382 Link: https://lore.kernel.org/r/20210315102606.17153-1-antti.jarvinen@gmail.com Signed-off-by: Antti Järvinen <antti.jarvinen@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Kishon Vijay Abraham I <kishon@ti.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-11PCI: Add function 1 DMA alias quirk for Marvell 9215 SATA controllerBjorn Helgaas
[ Upstream commit 059983790a4c963d92943e55a61fca55be427d55 ] Add function 1 DMA alias quirk for Marvell 88SS9215 PCIe SSD Controller. Link: https://bugzilla.kernel.org/show_bug.cgi?id=42679#c135 Link: https://lore.kernel.org/r/20201110220516.697934-1-helgaas@kernel.org Reported-by: John Smith <LK7S2ED64JHGLKj75shg9klejHWG49h5hk@protonmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-21PCI: Mark AMD Navi10 GPU rev 0x00 ATS as brokenKai-Heng Feng
commit 45beb31d3afb651bb5c41897e46bd4fa9980c51c upstream. We are seeing AMD Radeon Pro W5700 doesn't work when IOMMU is enabled: iommu ivhd0: AMD-Vi: Event logged [IOTLB_INV_TIMEOUT device=63:00.0 address=0x42b5b01a0] iommu ivhd0: AMD-Vi: Event logged [IOTLB_INV_TIMEOUT device=63:00.0 address=0x42b5b01c0] The error also makes graphics driver fail to probe the device. It appears to be the same issue as commit 5e89cd303e3a ("PCI: Mark AMD Navi14 GPU rev 0xc5 ATS as broken") addresses, and indeed the same ATS quirk can workaround the issue. See-also: 5e89cd303e3a ("PCI: Mark AMD Navi14 GPU rev 0xc5 ATS as broken") See-also: d28ca864c493 ("PCI: Mark AMD Stoney Radeon R7 GPU ATS as broken") See-also: 9b44b0b09dec ("PCI: Mark AMD Stoney GPU ATS as broken") Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=208725 Link: https://lore.kernel.org/r/20200728104554.28927-1-kai.heng.feng@canonical.com Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-19PCI: Release IVRS table in AMD ACS quirkHanjun Guo
[ Upstream commit 090688fa4e448284aaa16136372397d7d10814db ] The acpi_get_table() should be coupled with acpi_put_table() if the mapped table is not used at runtime to release the table mapping. In pci_quirk_amd_sb_acs(), IVRS table is just used for checking AMD IOMMU is supported, not used at runtime, so put the table after using it. Fixes: 15b100dfd1c9 ("PCI: Claim ACS support for AMD southbridge devices") Link: https://lore.kernel.org/r/1595411068-15440-1-git-send-email-guohanjun@huawei.com Signed-off-by: Hanjun Guo <guohanjun@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-05PCI/ASPM: Disable ASPM on ASMedia ASM1083/1085 PCIe-to-PCI bridgeRobert Hancock
commit b361663c5a40c8bc758b7f7f2239f7a192180e7c upstream. Recently ASPM handling was changed to allow ASPM on PCIe-to-PCI/PCI-X bridges. Unfortunately the ASMedia ASM1083/1085 PCIe to PCI bridge device doesn't seem to function properly with ASPM enabled. On an Asus PRIME H270-PRO motherboard, it causes errors like these: pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID) pcieport 0000:00:1c.0: AER: device [8086:a292] error status/mask=00003000/00002000 pcieport 0000:00:1c.0: AER: [12] Timeout pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0 pcieport 0000:00:1c.0: AER: can't find device of ID00e0 In addition to flooding the kernel log, this also causes the machine to wake up immediately after suspend is initiated. The device advertises ASPM L0s and L1 support in the Link Capabilities register, but the ASMedia web page for ASM1083 [1] claims "No PCIe ASPM support". Windows 10 (build 2004) enables L0s, but it also logs correctable PCIe errors. Add a quirk to disable ASPM for this device. [1] https://www.asmedia.com.tw/eng/e_show_products.php?cate_index=169&item=114 [bhelgaas: commit log] Fixes: 66ff14e59e8a ("PCI/ASPM: Allow ASPM on links to PCIe-to-PCI/PCI-X Bridges") Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=208667 Link: https://lore.kernel.org/r/20200722021803.17958-1-hancockrwd@gmail.com Signed-off-by: Robert Hancock <hancockrwd@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-22PCI: Generalize multi-function power dependency device linksAbhishek Sahu
[ Upstream commit a17beb1a0882a544523dcb5d0da4801272dfd43a ] Although not allowed by the PCI specs, some multi-function devices have power dependencies between the functions. For example, function 1 may not work unless function 0 is in the D0 power state. The existing quirk_gpu_hda() adds a device link to express this dependency for GPU and HDA devices, but it really is not specific to those device types. Generalize it and rename it to pci_create_device_link() so we can create dependencies between any "consumer" and "producer" functions of a multi-function device, where the consumer is only functional if the producer is in D0. This reorganization should not affect any functionality. Link: https://lore.kernel.org/lkml/20190606092225.17960-2-abhsahu@nvidia.com Signed-off-by: Abhishek Sahu <abhsahu@nvidia.com> [bhelgaas: commit log, reword diagnostic] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-22PCI: Unify ACS quirk desired vs provided checkingBjorn Helgaas
[ Upstream commit 7cf2cba43f15c74bac46dc5f0326805d25ef514d ] Most of the ACS quirks have a similar pattern of: acs_flags &= ~( <controls provided by this device> ); return acs_flags ? 0 : 1; Pull this out into a helper function to simplify the quirks slightly. The helper function is also a convenient place for comments about what the list of ACS controls means. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-22PCI: Make ACS quirk implementations more uniformBjorn Helgaas
[ Upstream commit c8de8ed2dcaac82e5d76d467dc0b02e0ee79809b ] The ACS quirks differ in needless ways, which makes them look more different than they really are. Reorder the ACS flags in order of definitions in the spec: PCI_ACS_SV Source Validation PCI_ACS_TB Translation Blocking PCI_ACS_RR P2P Request Redirect PCI_ACS_CR P2P Completion Redirect PCI_ACS_UF Upstream Forwarding PCI_ACS_EC P2P Egress Control PCI_ACS_DT Direct Translated P2P (PCIe r5.0, sec 7.7.8.2) and use similar code structure in all. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-22PCI: Enable NVIDIA HDA controllersLukas Wunner
[ Upstream commit b516ea586d717472178e6ef1c152e85608b0ce32 ] Many NVIDIA GPUs can be configured as either a single-function video device or a multi-function device with video at function 0 and an HDA audio controller at function 1. The HDA controller can be enabled or disabled by a bit in the function 0 config space. Some BIOSes leave the HDA disabled, which means the HDMI connector from the NVIDIA GPU may not work. Sometimes the BIOS enables the HDA if an HDMI cable is connected at boot time, but that doesn't handle hotplug cases. Enable the HDA controller on device enumeration and resume and re-read the header type, which tells us whether the GPU is a multi-function device. This quirk is limited to NVIDIA PCI devices with the VGA Controller device class. This is expected to correspond to product configurations where the NVIDIA GPU has connectors attached. Other products where the device class is 3D Controller are expected to correspond to configurations where the NVIDIA GPU is dedicated (dGPU) and has no connectors. See original post (URL below) for more details. This commit takes inspiration from an earlier patch by Daniel Drake. Link: https://lore.kernel.org/r/20190708051744.24039-1-drake@endlessm.com v2 Link: https://lore.kernel.org/r/20190613063514.15317-1-drake@endlessm.com v1 Link: https://devtalk.nvidia.com/default/topic/1024022 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=75985 Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Daniel Drake <drake@endlessm.com> [bhelgaas: commit log, log message, return early if already enabled] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Aaron Plattner <aplattner@nvidia.com> Cc: Peter Wu <peter@lekensteyn.nl> Cc: Ilia Mirkin <imirkin@alum.mit.edu> Cc: Karol Herbst <kherbst@redhat.com> Cc: Maik Freudenberg <hhfeuer@gmx.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-22PCI: Add NVIDIA GPU multi-function power dependenciesAbhishek Sahu
[ Upstream commit 6d2e369f0d4c3e6125c886847c04106b03d2609e ] The NVIDIA Turing GPU is a multi-function PCI device with the following functions: - Function 0: VGA display controller - Function 1: Audio controller - Function 2: USB xHCI Host controller - Function 3: USB Type-C UCSI controller Function 0 is tightly coupled with other functions in the hardware. When function 0 is in D3, it gates power for hardware blocks used by other functions, which means those functions only work when function 0 is in D0. If any of these functions (1/2/3) are in D0, then function 0 should also be in D0. Commit 07f4f97d7b4b ("vga_switcheroo: Use device link for HDA controller") already creates a device link to show the dependency of function 1 on function 0 of this GPU. Create additional device links to express the dependencies of functions 2 and 3 on function 0. This means function 0 will be in D0 if any other function is in D0. [bhelgaas: I think the PCI spec expectation is that functions can be power-managed independently, so I don't think this device is technically compliant. For example, the PCIe r5.0 spec, sec 1.4, says "the PCI/PCIe hardware/software model includes architectural constructs necessary to discover, configure, and use a Function, without needing Function-specific knowledge" and sec 5.1 says "D states are associated with a particular Function" and "PM provides ... a mechanism to identify power management capabilities of a given Function [and] the ability to transition a Function into a certain power management state."] Link: https://lore.kernel.org/lkml/20190606092225.17960-3-abhsahu@nvidia.com Signed-off-by: Abhishek Sahu <abhsahu@nvidia.com> [bhelgaas: commit log] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-22PCI: Add ACS quirk for Intel Root Complex Integrated EndpointsAshok Raj
[ Upstream commit 3247bd10a4502a3075ce8e1c3c7d31ef76f193ce ] All Intel platforms guarantee that all root complex implementations must send transactions up to IOMMU for address translations. Hence for Intel RCiEP devices, we can assume some ACS-type isolation even without an ACS capability. From the Intel VT-d spec, r3.1, sec 3.16 ("Root-Complex Peer to Peer Considerations"): When DMA remapping is enabled, peer-to-peer requests through the Root-Complex must be handled as follows: - The input address in the request is translated (through first-level, second-level or nested translation) to a host physical address (HPA). The address decoding for peer addresses must be done only on the translated HPA. Hardware implementations are free to further limit peer-to-peer accesses to specific host physical address regions (or to completely disallow peer-forwarding of translated requests). - Since address translation changes the contents (address field) of the PCI Express Transaction Layer Packet (TLP), for PCI Express peer-to-peer requests with ECRC, the Root-Complex hardware must use the new ECRC (re-computed with the translated address) if it decides to forward the TLP as a peer request. - Root-ports, and multi-function root-complex integrated endpoints, may support additional peer-to-peer control features by supporting PCI Express Access Control Services (ACS) capability. Refer to ACS capability in PCI Express specifications for details. Since Linux didn't give special treatment to allow this exception, certain RCiEP MFD devices were grouped in a single IOMMU group. This doesn't permit a single device to be assigned to a guest for instance. In one vendor system: Device 14.x were grouped in a single IOMMU group. /sys/kernel/iommu_groups/5/devices/0000:00:14.0 /sys/kernel/iommu_groups/5/devices/0000:00:14.2 /sys/kernel/iommu_groups/5/devices/0000:00:14.3 After this patch: /sys/kernel/iommu_groups/5/devices/0000:00:14.0 /sys/kernel/iommu_groups/5/devices/0000:00:14.2 /sys/kernel/iommu_groups/6/devices/0000:00:14.3 <<< new group 14.0 and 14.2 are integrated devices, but legacy end points, whereas 14.3 was a PCIe-compliant RCiEP. 00:14.3 Network controller: Intel Corporation Device 9df0 (rev 30) Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00 This permits assigning this device to a guest VM. [bhelgaas: drop "Fixes" tag since this doesn't fix a bug in that commit] Link: https://lore.kernel.org/r/1590699462-7131-1-git-send-email-ashok.raj@intel.com Tested-by: Darrel Goeddel <dgoeddel@forcepoint.com> Signed-off-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Alex Williamson <alex.williamson@redhat.com> Cc: stable@vger.kernel.org Cc: Lu Baolu <baolu.lu@linux.intel.com> Cc: Mark Scott <mscott@forcepoint.com>, Cc: Romil Sharma <rsharma@forcepoint.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-22PCI: Add ACS quirk for iProc PAXBAbhinav Ratna
[ Upstream commit 46b2c32df7a462d0e64b68c513e5c4c1b2a399a7 ] iProc PAXB Root Ports don't advertise an ACS capability, but they do not allow peer-to-peer transactions between Root Ports. Add an ACS quirk so each Root Port can be in a separate IOMMU group. [bhelgaas: commit log, comment, use common implementation style] Link: https://lore.kernel.org/r/1566275985-25670-1-git-send-email-srinath.mannam@broadcom.com Signed-off-by: Abhinav Ratna <abhinav.ratna@broadcom.com> Signed-off-by: Srinath Mannam <srinath.mannam@broadcom.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Scott Branden <scott.branden@broadcom.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-22PCI: Avoid FLR for AMD Starship USB 3.0Kevin Buettner
[ Upstream commit 5727043c73fdfe04597971b5f3f4850d879c1f4f ] The AMD Starship USB 3.0 host controller advertises Function Level Reset support, but it apparently doesn't work. Add a quirk to prevent use of FLR on this device. Without this quirk, when attempting to assign (pass through) an AMD Starship USB 3.0 host controller to a guest OS, the system becomes increasingly unresponsive over the course of several minutes, eventually requiring a hard reset. Shortly after attempting to start the guest, I see these messages: vfio-pci 0000:05:00.3: not ready 1023ms after FLR; waiting vfio-pci 0000:05:00.3: not ready 2047ms after FLR; waiting vfio-pci 0000:05:00.3: not ready 4095ms after FLR; waiting vfio-pci 0000:05:00.3: not ready 8191ms after FLR; waiting And then eventually: vfio-pci 0000:05:00.3: not ready 65535ms after FLR; giving up INFO: NMI handler (perf_event_nmi_handler) took too long to run: 0.000 msecs perf: interrupt took too long (642744 > 2500), lowering kernel.perf_event_max_sample_rate to 1000 INFO: NMI handler (perf_event_nmi_handler) took too long to run: 82.270 msecs INFO: NMI handler (perf_event_nmi_handler) took too long to run: 680.608 msecs INFO: NMI handler (perf_event_nmi_handler) took too long to run: 100.952 msecs ... watchdog: BUG: soft lockup - CPU#3 stuck for 22s! [qemu-system-x86:7487] Tested on a Micro-Star International Co., Ltd. MS-7C59/Creator TRX40 motherboard with an AMD Ryzen Threadripper 3970X. Link: https://lore.kernel.org/r/20200524003529.598434ff@f31-4.lan Signed-off-by: Kevin Buettner <kevinb@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-22PCI: Avoid FLR for AMD Matisse HD Audio & USB 3.0Marcos Scriven
[ Upstream commit 0d14f06cd6657ba3446a5eb780672da487b068e7 ] The AMD Matisse HD Audio & USB 3.0 devices advertise Function Level Reset support, but hang when an FLR is triggered. To reproduce the problem, attach the device to a VM, then detach and try to attach again. Rename the existing quirk_intel_no_flr(), which was not Intel-specific, to quirk_no_flr(), and apply it to prevent the use of FLR on these AMD devices. Link: https://lore.kernel.org/r/CAAri2DpkcuQZYbT6XsALhx2e6vRqPHwtbjHYeiH7MNp4zmt1RA@mail.gmail.com Signed-off-by: Marcos Scriven <marcos@scriven.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-22PCI: Avoid Pericom USB controller OHCI/EHCI PME# defectKai-Heng Feng
[ Upstream commit 68f5fc4ea9ddf9f77720d568144219c4e6452cde ] Both Pericom OHCI and EHCI devices advertise PME# support from all power states: 06:00.0 USB controller [0c03]: Pericom Semiconductor PI7C9X442SL USB OHCI Controller [12d8:400e] (rev 01) (prog-if 10 [OHCI]) Subsystem: Pericom Semiconductor PI7C9X442SL USB OHCI Controller [12d8:400e] Capabilities: [80] Power Management version 3 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) 06:00.2 USB controller [0c03]: Pericom Semiconductor PI7C9X442SL USB EHCI Controller [12d8:400f] (rev 01) (prog-if 20 [EHCI]) Subsystem: Pericom Semiconductor PI7C9X442SL USB EHCI Controller [12d8:400f] Capabilities: [80] Power Management version 3 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) But testing shows that it's unreliable: there is a 20% chance PME# won't be asserted when a USB device is plugged. Remove PME support for both devices to make USB plugging work reliably. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=205981 Link: https://lore.kernel.org/r/20200508065343.32751-2-kai.heng.feng@canonical.com Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-05-02PCI: Move Apex Edge TPU class quirk to fix BAR assignmentBjorn Helgaas
commit 0a8f41023e8a3c100b3dc458ed2da651bf961ead upstream. Some Google Apex Edge TPU devices have a class code of 0 (PCI_CLASS_NOT_DEFINED). This prevents the PCI core from assigning resources for the Apex BARs because __dev_sort_resources() ignores classless devices, host bridges, and IOAPICs. On x86, firmware typically assigns those resources, so this was not a problem. But on some architectures, firmware does *not* assign BARs, and since the PCI core didn't do it either, the Apex device didn't work correctly: apex 0000:01:00.0: can't enable device: BAR 0 [mem 0x00000000-0x00003fff 64bit pref] not claimed apex 0000:01:00.0: error enabling PCI device f390d08d8b87 ("staging: gasket: apex: fixup undefined PCI class") added a quirk to fix the class code, but it was in the apex driver, and if the driver was built as a module, it was too late to help. Move the quirk to the PCI core, where it will always run early enough that the PCI core will assign resources if necessary. Link: https://lore.kernel.org/r/CAEzXK1r0Er039iERnc2KJ4jn7ySNUOG9H=Ha8TD8XroVqiZjgg@mail.gmail.com Fixes: f390d08d8b87 ("staging: gasket: apex: fixup undefined PCI class") Reported-by: Luís Mendes <luis.p.mendes@gmail.com> Debugged-by: Luís Mendes <luis.p.mendes@gmail.com> Tested-by: Luis Mendes <luis.p.mendes@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Todd Poynor <toddpoynor@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-02PCI: Avoid ASMedia XHCI USB PME# from D0 defectKai-Heng Feng
commit 2880325bda8d53566dcb9725abc929eec871608e upstream. The ASMedia USB XHCI Controller claims to support generating PME# while in D0: 01:00.0 USB controller: ASMedia Technology Inc. Device 2142 (prog-if 30 [XHCI]) Subsystem: SUNIX Co., Ltd. Device 312b Capabilities: [78] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst+ PME-Enable+ DSel=0 DScale=0 PME- However PME# only gets asserted when plugging USB 2.0 or USB 1.1 devices, but not for USB 3.0 devices. Remove PCI_PM_CAP_PME_D0 to avoid using PME under D0. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=205919 Link: https://lore.kernel.org/r/20191219192006.16270-1-kai.heng.feng@canonical.com Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-17PCI: Add boot interrupt quirk mechanism for Xeon chipsetsSean V Kelley
commit b88bf6c3b6ff77948c153cac4e564642b0b90632 upstream. The following was observed by Kar Hin Ong with RT patchset: Backtrace: irq 19: nobody cared (try booting with the "irqpoll" option) CPU: 0 PID: 3329 Comm: irq/34-nipalk Tainted:4.14.87-rt49 #1 Hardware name: National Instruments NI PXIe-8880/NI PXIe-8880, BIOS 2.1.5f1 01/09/2020 Call Trace: <IRQ> ? dump_stack+0x46/0x5e ? __report_bad_irq+0x2e/0xb0 ? note_interrupt+0x242/0x290 ? nNIKAL100_memoryRead16+0x8/0x10 [nikal] ? handle_irq_event_percpu+0x55/0x70 ? handle_irq_event+0x4f/0x80 ? handle_fasteoi_irq+0x81/0x180 ? handle_irq+0x1c/0x30 ? do_IRQ+0x41/0xd0 ? common_interrupt+0x84/0x84 </IRQ> ... handlers: [<ffffffffb3297200>] irq_default_primary_handler threaded [<ffffffffb3669180>] usb_hcd_irq Disabling IRQ #19 The problem being that this device is triggering boot interrupts due to threaded interrupt handling and masking of the IO-APIC. These boot interrupts are then forwarded on to the legacy PCH's PIRQ lines where there is no handler present for the device. Whenever a PCI device fires interrupt (INTx) to Pin 20 of IOAPIC 2 (GSI 44), the kernel receives two interrupts: 1. Interrupt from Pin 20 of IOAPIC 2 -> Expected 2. Interrupt from Pin 19 of IOAPIC 1 -> UNEXPECTED Quirks for disabling boot interrupts (preferred) or rerouting the handler exist but do not address these Xeon chipsets' mechanism: https://lore.kernel.org/lkml/12131949181903-git-send-email-sassmann@suse.de/ Add a new mechanism via PCI CFG for those chipsets supporting CIPINTRC register's dis_intx_rout2ich bit. Link: https://lore.kernel.org/r/20200220192930.64820-2-sean.v.kelley@linux.intel.com Reported-by: Kar Hin Ong <kar.hin.ong@ni.com> Tested-by: Kar Hin Ong <kar.hin.ong@ni.com> Signed-off-by: Sean V Kelley <sean.v.kelley@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-24PCI: Increase D3 delay for AMD Ryzen5/7 XHCI controllersDaniel Drake
[ Upstream commit 3030df209aa8cf831b9963829bd9f94900ee8032 ] On Asus UX434DA (AMD Ryzen7 3700U) and Asus X512DK (AMD Ryzen5 3500U), the XHCI controller fails to resume from runtime suspend or s2idle, and USB becomes unusable from that point. xhci_hcd 0000:03:00.4: Refused to change power state, currently in D3 xhci_hcd 0000:03:00.4: enabling device (0000 -> 0002) xhci_hcd 0000:03:00.4: WARN: xHC restore state timeout xhci_hcd 0000:03:00.4: PCI post-resume error -110! xhci_hcd 0000:03:00.4: HC died; cleaning up During suspend, a transition to D3cold is attempted, however the affected platforms do not seem to cut the power to the PCI device when in this state, so the device stays in D3hot. Upon resume, the D3hot-to-D0 transition is successful only if the D3 delay is increased to 20ms. The transition failure does not appear to be detectable as a CRS condition. Add a PCI quirk to increase the delay on the affected hardware. Link: https://bugzilla.kernel.org/show_bug.cgi?id=205587 Link: http://lkml.kernel.org/r/CAD8Lp47Vh69gQjROYG69=waJgL7hs1PwnLonL9+27S_TcRhixA@mail.gmail.com Link: https://lore.kernel.org/r/20191127053836.31624-2-drake@endlessm.com Signed-off-by: Daniel Drake <drake@endlessm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-02-24PCI: Add generic quirk for increasing D3hot delayDaniel Drake
[ Upstream commit 62fe23df067715a21c4aef44068efe7ceaa8f627 ] Separate the D3 delay increase functionality out of quirk_radeon_pm() into its own function so that it can be shared with other quirks, including the AMD Ryzen XHCI quirk that will be introduced in a followup commit. Tweak the function name and message to indicate more clearly that the delay relates to a D3hot-to-D0 transition. Link: https://lore.kernel.org/r/20191127053836.31624-1-drake@endlessm.com Signed-off-by: Daniel Drake <drake@endlessm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-02-24PCI: iproc: Apply quirk_paxc_bridge() for module as well as built-inWei Liu
[ Upstream commit 574f29036fce385e28617547955dd6911d375025 ] Previously quirk_paxc_bridge() was applied when the iproc driver was built-in, but not when it was compiled as a module. This happened because it was under #ifdef CONFIG_PCIE_IPROC_PLATFORM: PCIE_IPROC_PLATFORM=y causes CONFIG_PCIE_IPROC_PLATFORM to be defined, but PCIE_IPROC_PLATFORM=m causes CONFIG_PCIE_IPROC_PLATFORM_MODULE to be defined. Move quirk_paxc_bridge() to pcie-iproc.c and drop the #ifdef so the quirk is always applied, whether iproc is built-in or a module. [bhelgaas: commit log, move to pcie-iproc.c, not pcie-iproc-platform.c] Link: https://lore.kernel.org/r/20191211174511.89713-1-wei.liu@kernel.org Signed-off-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-02-01PCI: Add DMA alias quirk for Intel VCA NTBSlawomir Pawlowski
[ Upstream commit 56b4cd4b7da9ee95778eb5c8abea49f641ebfd91 ] Intel Visual Compute Accelerator (VCA) is a family of PCIe add-in devices exposing computational units via Non Transparent Bridges (NTB, PEX 87xx). Similarly to MIC x200, we need to add DMA aliases to allow buffer access when IOMMU is enabled. Add aliases to allow computational unit access to host memory. These aliases mark the whole VCA device as one IOMMU group. All possible slot numbers (0x20) are used, since we are unable to tell what slot is used on other side. This quirk is intended for both host and computational unit sides. The VCA devices have up to five functions: four for DMA channels and one additional. Link: https://lore.kernel.org/r/5683A335CC8BE1438C3C30C49DCC38DF637CED8E@IRSMSX102.ger.corp.intel.com Signed-off-by: Slawomir Pawlowski <slawomir.pawlowski@intel.com> Signed-off-by: Przemek Kitszel <przemyslawx.kitszel@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-29PCI: Mark AMD Navi14 GPU rev 0xc5 ATS as brokenAlex Deucher
commit 5e89cd303e3a4505752952259b9f1ba036632544 upstream. To account for parts of the chip that are "harvested" (disabled) due to silicon flaws, caches on some AMD GPUs must be initialized before ATS is enabled. ATS is normally enabled by the IOMMU driver before the GPU driver loads, so this cache initialization would have to be done in a quirk, but that's too complex to be practical. For Navi14 (device ID 0x7340), this initialization is done by the VBIOS, but apparently some boards went to production with an older VBIOS that doesn't do it. Disable ATS for those boards. Link: https://lore.kernel.org/r/20200114205523.1054271-3-alexander.deucher@amd.com Bug: https://gitlab.freedesktop.org/drm/amd/issues/1015 See-also: d28ca864c493 ("PCI: Mark AMD Stoney Radeon R7 GPU ATS as broken") See-also: 9b44b0b09dec ("PCI: Mark AMD Stoney GPU ATS as broken") [bhelgaas: squash into one patch, simplify slightly, commit log] Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-21PCI: Apply Cavium ACS quirk to ThunderX2 and ThunderX3George Cherian
commit f338bb9f0179cb959977b74e8331b312264d720b upstream. Enhance the ACS quirk for Cavium Processors. Add the root port vendor IDs for ThunderX2 and ThunderX3 series of processors. [bhelgaas: add Fixes: and stable tag] Fixes: f2ddaf8dfd4a ("PCI: Apply Cavium ThunderX ACS quirk to more Root Ports") Link: https://lore.kernel.org/r/20191111024243.GA11408@dc5-eodlnx05.marvell.com Signed-off-by: George Cherian <george.cherian@marvell.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Robert Richter <rrichter@marvell.com> Cc: stable@vger.kernel.org # v4.12+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-21PCI: Fix Intel ACS quirk UPDCR register addressSteffen Liebergeld
commit d8558ac8c93d429d65d7490b512a3a67e559d0d4 upstream. According to documentation [0] the correct offset for the Upstream Peer Decode Configuration Register (UPDCR) is 0x1014. It was previously defined as 0x1114. d99321b63b1f ("PCI: Enable quirks for PCIe ACS on Intel PCH root ports") intended to enforce isolation between PCI devices allowing them to be put into separate IOMMU groups. Due to the wrong register offset the intended isolation was not fully enforced. This is fixed with this patch. Please note that I did not test this patch because I have no hardware that implements this register. [0] https://www.intel.com/content/dam/www/public/us/en/documents/datasheets/4th-gen-core-family-mobile-i-o-datasheet.pdf (page 325) Fixes: d99321b63b1f ("PCI: Enable quirks for PCIe ACS on Intel PCH root ports") Link: https://lore.kernel.org/r/7a3505df-79ba-8a28-464c-88b83eefffa6@kernkonzept.com Signed-off-by: Steffen Liebergeld <steffen.liebergeld@kernkonzept.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com> Acked-by: Ashok Raj <ashok.raj@intel.com> Cc: stable@vger.kernel.org # v3.15+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-06PCI: Fix Switchtec DMA aliasing quirk dmesg noiseLogan Gunthorpe
[ Upstream commit 742bbe1ee35b5699c092541f97c7cec326556bb1 ] Currently the Switchtec quirk runs on all endpoints in the switch, including all the upstream and downstream ports. These other functions do not contain BARs, so the quirk fails when trying to map the BAR and prints the error "Cannot iomap Switchtec device". The user will see a few of these useless and scary errors, one for each port in the switch. At most, the quirk should only run on either a management endpoint (PCI_CLASS_MEMORY_OTHER) or an NTB endpoint (PCI_CLASS_BRIDGE_OTHER). However, the quirk is useless except in NTB applications, so we will only run it when the class is PCI_CLASS_BRIDGE_OTHER. Switch to using DECLARE_PCI_FIXUP_CLASS_FINAL and only match PCI_CLASS_BRIDGE_OTHER. Reported-by: Stephen Bates <sbates@raithlin.com> Fixes: ad281ecf1c7d ("PCI: Add DMA alias quirk for Microsemi Switchtec NTB") Signed-off-by: Logan Gunthorpe <logang@deltatee.com> [bhelgaas: split SWITCHTEC_QUIRK() introduction to separate patch] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Doug Meyer <dmeyer@gigaio.com> Cc: Kurt Schwemmer <kurt.schwemmer@microsemi.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-09-16PCI: Reset both NVIDIA GPU and HDA in ThinkPad P50 workaroundLyude Paul
[ Upstream commit ad54567ad5d8e938ee6cf02e4f3867f18835ae6e ] quirk_reset_lenovo_thinkpad_50_nvgpu() resets NVIDIA GPUs to work around an apparent BIOS defect. It previously used pci_reset_function(), and the available method was a bus reset, which was fine because there was only one function on the bus. After b516ea586d71 ("PCI: Enable NVIDIA HDA controllers"), there are now two functions (the HDA controller and the GPU itself) on the bus, so the reset fails. Use pci_reset_bus() explicitly instead of pci_reset_function() since it's OK to reset both devices. [bhelgaas: commit log, add e0547c81bfcf] Fixes: b516ea586d71 ("PCI: Enable NVIDIA HDA controllers") Fixes: e0547c81bfcf ("PCI: Reset Lenovo ThinkPad P50 nvgpu at boot if necessary") Link: https://lore.kernel.org/r/20190801220117.14952-1-lyude@redhat.com Signed-off-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Ben Skeggs <bskeggs@redhat.com> Cc: Lukas Wunner <lukas@wunner.de> Cc: Daniel Drake <drake@endlessm.com> Cc: Aaron Plattner <aplattner@nvidia.com> Cc: Peter Wu <peter@lekensteyn.nl> Cc: Ilia Mirkin <imirkin@alum.mit.edu> Cc: Karol Herbst <kherbst@redhat.com> Cc: Maik Freudenberg <hhfeuer@gmx.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-09-16PCI: Reset Lenovo ThinkPad P50 nvgpu at boot if necessaryLyude Paul
[ Upstream commit e0547c81bfcfad01cbbfa93a5e66bb98ab932f80 ] On ThinkPad P50 SKUs with an Nvidia Quadro M1000M instead of the M2000M variant, the BIOS does not always reset the secondary Nvidia GPU during reboot if the laptop is configured in Hybrid Graphics mode. The reason is unknown, but the following steps and possibly a good bit of patience will reproduce the issue: 1. Boot up the laptop normally in Hybrid Graphics mode 2. Make sure nouveau is loaded and that the GPU is awake 3. Allow the Nvidia GPU to runtime suspend itself after being idle 4. Reboot the machine, the more sudden the better (e.g. sysrq-b may help) 5. If nouveau loads up properly, reboot the machine again and go back to step 2 until you reproduce the issue This results in some very strange behavior: the GPU will be left in exactly the same state it was in when the previously booted kernel started the reboot. This has all sorts of bad side effects: for starters, this completely breaks nouveau starting with a mysterious EVO channel failure that happens well before we've actually used the EVO channel for anything: nouveau 0000:01:00.0: disp: chid 0 mthd 0000 data 00000400 00001000 00000002 This causes a timeout trying to bring up the GR ctx: nouveau 0000:01:00.0: timeout WARNING: CPU: 0 PID: 12 at drivers/gpu/drm/nouveau/nvkm/engine/gr/ctxgf100.c:1547 gf100_grctx_generate+0x7b2/0x850 [nouveau] Hardware name: LENOVO 20EQS64N0B/20EQS64N0B, BIOS N1EET82W (1.55 ) 12/18/2018 Workqueue: events_long drm_dp_mst_link_probe_work [drm_kms_helper] ... nouveau 0000:01:00.0: gr: wait for idle timeout (en: 1, ctxsw: 0, busy: 1) nouveau 0000:01:00.0: gr: wait for idle timeout (en: 1, ctxsw: 0, busy: 1) nouveau 0000:01:00.0: fifo: fault 01 [WRITE] at 0000000000008000 engine 00 [GR] client 15 [HUB/SCC_NB] reason c4 [] on channel -1 [0000000000 unknown] The GPU never manages to recover. Booting without loading nouveau causes issues as well, since the GPU starts sending spurious interrupts that cause other device's IRQs to get disabled by the kernel: irq 16: nobody cared (try booting with the "irqpoll" option) ... handlers: [<000000007faa9e99>] i801_isr [i2c_i801] Disabling IRQ #16 ... serio: RMI4 PS/2 pass-through port at rmi4-00.fn03 i801_smbus 0000:00:1f.4: Timeout waiting for interrupt! i801_smbus 0000:00:1f.4: Transaction timeout rmi4_f03 rmi4-00.fn03: rmi_f03_pt_write: Failed to write to F03 TX register (-110). i801_smbus 0000:00:1f.4: Timeout waiting for interrupt! i801_smbus 0000:00:1f.4: Transaction timeout rmi4_physical rmi4-00: rmi_driver_set_irq_bits: Failed to change enabled interrupts! This causes the touchpad and sometimes other things to get disabled. Since this happens without nouveau, we can't fix this problem from nouveau itself. Add a PCI quirk for the specific P50 variant of this GPU. Make sure the GPU is advertising NoReset- so we don't reset the GPU when the machine is in Dedicated graphics mode (where the GPU being initialized by the BIOS is normal and expected). Map the GPU MMIO space and read the magic 0x2240c register, which will have bit 1 set if the device was POSTed during a previous boot. Once we've confirmed all of this, reset the GPU and re-disable it - bringing it back to a healthy state. Link: https://bugzilla.kernel.org/show_bug.cgi?id=203003 Link: https://lore.kernel.org/lkml/20190212220230.1568-1-lyude@redhat.com Signed-off-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: nouveau@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Cc: Karol Herbst <kherbst@redhat.com> Cc: Ben Skeggs <skeggsb@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-09-16PCI: Add macro for Switchtec quirk declarationsLogan Gunthorpe
[ Upstream commit 01d5d7fa8376c6b5acda86e16fcad22de6bba486 ] Add SWITCHTEC_QUIRK() to reduce redundancy in declaring devices that use quirk_switchtec_ntb_dma_alias(). By itself, this is no functional change, but a subsequent patch updates SWITCHTEC_QUIRK() to fix ad281ecf1c7d ("PCI: Add DMA alias quirk for Microsemi Switchtec NTB"). Fixes: ad281ecf1c7d ("PCI: Add DMA alias quirk for Microsemi Switchtec NTB") Signed-off-by: Logan Gunthorpe <logang@deltatee.com> [bhelgaas: split to separate patch] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-25PCI: Work around Pericom PCIe-to-PCI bridge Retrain Link erratumStefan Mätje
commit 4ec73791a64bab25cabf16a6067ee478692e506d upstream. Due to an erratum in some Pericom PCIe-to-PCI bridges in reverse mode (conventional PCI on primary side, PCIe on downstream side), the Retrain Link bit needs to be cleared manually to allow the link training to complete successfully. If it is not cleared manually, the link training is continuously restarted and no devices below the PCI-to-PCIe bridge can be accessed. That means drivers for devices below the bridge will be loaded but won't work and may even crash because the driver is only reading 0xffff. See the Pericom Errata Sheet PI7C9X111SLB_errata_rev1.2_102711.pdf for details. Devices known as affected so far are: PI7C9X110, PI7C9X111SL, PI7C9X130. Add a new flag, clear_retrain_link, in struct pci_dev. Quirks for affected devices set this bit. Note that pcie_retrain_link() lives in aspm.c because that's currently the only place we use it, but this erratum is not specific to ASPM, and we may retrain links for other reasons in the future. Signed-off-by: Stefan Mätje <stefan.maetje@esd.eu> [bhelgaas: apply regardless of CONFIG_PCIEASPM] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> CC: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-25PCI: Mark Atheros AR9462 to avoid bus resetJames Prestwood
commit 6afb7e26978da5e86e57e540fdce65c8b04f398a upstream. When using PCI passthrough with this device, the host machine locks up completely when starting the VM, requiring a hard reboot. Add a quirk to avoid bus resets on this device. Fixes: c3e59ee4e766 ("PCI: Mark Atheros AR93xx to avoid bus reset") Link: https://lore.kernel.org/linux-pci/20190107213248.3034-1-james.prestwood@linux.intel.com Signed-off-by: James Prestwood <james.prestwood@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: stable@vger.kernel.org # v3.14+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-25PCI: Mark AMD Stoney Radeon R7 GPU ATS as brokenNikolai Kostrigin
commit d28ca864c493637f3c957f4ed9348a94fca6de60 upstream. ATS is broken on the Radeon R7 GPU (at least for Stoney Ridge based laptop) and causes IOMMU stalls and system failure. Disable ATS on these devices to make them usable again with IOMMU enabled. Thanks to Joerg Roedel <jroedel@suse.de> for help. [bhelgaas: In the email thread mentioned below, Alex suspects the real problem is in sbios or iommu, so it may affect only certain systems, and it may affect other devices in those systems as well. However, per Joerg we lack the ability to debug further, so this quirk is the best we can do for now.] Link: https://bugzilla.kernel.org/show_bug.cgi?id=194521 Link: https://lore.kernel.org/lkml/20190408103725.30426-1-nickel@altlinux.org Fixes: 9b44b0b09dec ("PCI: Mark AMD Stoney GPU ATS as broken") Signed-off-by: Nikolai Kostrigin <nickel@altlinux.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Joerg Roedel <jroedel@suse.de> CC: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-17PCI: Add function 1 DMA alias quirk for Marvell 9170 SATA controllerAndre Przywara
commit 9cde402a59770a0669d895399c13407f63d7d209 upstream. There is a Marvell 88SE9170 PCIe SATA controller I found on a board here. Some quick testing with the ARM SMMU enabled reveals that it suffers from the same requester ID mixup problems as the other Marvell chips listed already. Add the PCI vendor/device ID to the list of chips which need the workaround. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-13PCI: Add Device IDs for Intel GPU "spurious interrupt" quirkBin Meng
commit d0c9606b31a21028fb5b753c8ad79626292accfd upstream. Add Device IDs to the Intel GPU "spurious interrupt" quirk table. For these devices, unplugging the VGA cable and plugging it in again causes spurious interrupts from the IGD. Linux eventually disables the interrupt, but of course that disables any other devices sharing the interrupt. The theory is that this is a VGA BIOS defect: it should have disabled the IGD interrupt but failed to do so. See f67fd55fa96f ("PCI: Add quirk for still enabled interrupts on Intel Sandy Bridge GPUs") and 7c82126a94e6 ("PCI: Add new ID for Intel GPU "spurious interrupt" quirk") for some history. [bhelgaas: See link below for discussion about how to fix this more generically instead of adding device IDs for every new Intel GPU. I hope this is the last patch to add device IDs.] Link: https://lore.kernel.org/linux-pci/1537974841-29928-1-git-send-email-bmeng.cn@gmail.com Signed-off-by: Bin Meng <bmeng.cn@gmail.com> [bhelgaas: changelog] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org # v3.4+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-11Revert "PCI: Add ACS quirk for Intel 300 series"Mika Westerberg
This reverts f154a718e6cc ("PCI: Add ACS quirk for Intel 300 series"). It turns out that erratum "PCH PCIe* Controller Root Port (ACSCTLR) Appear As Read Only" has been fixed in 300 series chipsets, even though the datasheet [1] claims otherwise. To make ACS work properly on 300 series root ports, revert the faulty commit. [1] https://www.intel.com/content/dam/www/public/us/en/documents/specification-updates/300-series-c240-series-chipset-pch-spec-update.pdf Fixes: f154a718e6cc ("PCI: Add ACS quirk for Intel 300 series") Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org # v4.18+
2018-08-22PCI: Add support for relative addressing in quirk tablesArd Biesheuvel
Allow the PCI quirk tables to be emitted in a way that avoids absolute references to the hook functions. This reduces the size of the entries, and, more importantly, makes them invariant under runtime relocation (e.g., for KASLR) Link: http://lkml.kernel.org/r/20180704083651.24360-6-ard.biesheuvel@linaro.org Acked-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Acked-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: James Morris <james.morris@microsoft.com> Cc: James Morris <jmorris@namei.org> Cc: Jessica Yu <jeyu@kernel.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Nicolas Pitre <nico@linaro.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Russell King <linux@armlinux.org.uk> Cc: "Serge E. Hallyn" <serge@hallyn.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Garnier <thgarnie@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-15Merge branch 'remotes/lorenzo/pci/iproc'Bjorn Helgaas
- Add more devices to Broadcom PAXC quirk (Ray Jui) - Work around corrupted Broadcom PAXC config space to enable SMMU and GICv3 ITS (Ray Jui) - Disable MSI parsing to work around broken Broadcom PAXC logic in some devices (Ray Jui) - Hide unconfigured functions to work around a Broadcom PAXC defect (Ray Jui) - Lower iproc log level to reduce console output during boot (Ray Jui) * remotes/lorenzo/pci/iproc: PCI: iproc: Reduce inbound/outbound mapping print level PCI: iproc: Reject unconfigured physical functions from PAXC PCI: iproc: Disable MSI parsing in certain PAXC blocks PCI: iproc: Fix up corrupted PAXC root complex config registers PCI: iproc: Activate PAXC bridge quirk for more devices
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-04 02:21:21 +0000