summaryrefslogtreecommitdiff
path: root/drivers/pci/pcie/aspm.c
AgeCommit message (Collapse)Author
2020-10-16PCI/ASPM: Remove struct pcie_link_state.l1ssSaheed O. Bolarinwa
Previously we computed L1.2 parameters in the enumeration path, saved them in struct pcie_link_state.l1ss, and programmed them into the devices whenever we enabled or disabled L1.2 on the link. But these parameters are constant and don't need to be updated when enabling/disabling L1.2. Compute and program the L1.2 parameters once during enumeration and remove the struct pcie_link_state.l1ss member. No functional change intended. [bhelgaas: rework to program L1.2 parameters during enumeration] Link: https://lore.kernel.org/r/20201015193039.12585-13-helgaas@kernel.org Signed-off-by: Saheed O. Bolarinwa <refactormyself@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-10-16PCI/ASPM: Remove struct aspm_register_info.l1ss_capSaheed O. Bolarinwa
Previously we stored the L1SS Capabilities value in the struct aspm_register_info. We only need this information in one place, so read it there and remove struct aspm_register_info completely, since it's now empty. No functional change intended. [bhelgaas: split up, don't cache l1ss_cap in pci_dev] Link: https://lore.kernel.org/r/20201015193039.12585-12-helgaas@kernel.org Signed-off-by: Saheed O. Bolarinwa <refactormyself@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-10-16PCI/ASPM: Pass L1SS Capabilities value, not struct aspm_register_infoBjorn Helgaas
aspm_calc_l1ss_info() needs only the L1SS Capabilities. It doesn't need anything else from struct aspm_register_info, so pass only the Capabilities value. No functional change intended. Link: https://lore.kernel.org/r/20201015193039.12585-11-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-10-16PCI/ASPM: Remove struct aspm_register_info.l1ss_ctl1Saheed O. Bolarinwa
Previously we stored the L1SS Control 1 register in the struct aspm_register_info. We only need this information in one place, so read it there and remove it from struct aspm_register_info. No functional change intended. [bhelgaas: split ctl1/ctl2] Link: https://lore.kernel.org/r/20201015193039.12585-10-helgaas@kernel.org Signed-off-by: Saheed O. Bolarinwa <refactormyself@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-10-16PCI/ASPM: Remove struct aspm_register_info.l1ss_ctl2 (unused)Bjorn Helgaas
We never use the aspm_register_info.l1ss_ctl2 value, so remove it. No functional change intended. Link: https://lore.kernel.org/r/20201015193039.12585-9-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-10-16PCI/ASPM: Remove struct aspm_register_info.l1ss_cap_ptrSaheed O. Bolarinwa
Save the L1 Substates Capability pointer in struct pci_dev. Then we don't have to keep track of it in the struct aspm_register_info and struct pcie_link_state, which makes the code easier to read. No functional change intended. [bhelgaas: split to a separate patch] Link: https://lore.kernel.org/r/20201015193039.12585-8-helgaas@kernel.org Signed-off-by: Saheed O. Bolarinwa <refactormyself@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-10-16PCI/ASPM: Remove struct aspm_register_info.latency_encodingSaheed O. Bolarinwa
Previously we stored L0s and L1 Exit Latency information from the Link Capabilities register in the struct aspm_register_info. We only need these latencies when we already have the Link Capabilities values, so use those directly and remove the latencies from struct aspm_register_info. No functional change intended. Link: https://lore.kernel.org/r/20201015193039.12585-7-helgaas@kernel.org Signed-off-by: Saheed O. Bolarinwa <refactormyself@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-10-16PCI/ASPM: Remove struct aspm_register_info.enabledSaheed O. Bolarinwa
Previously we stored the "ASPM Control" bits from the Link Control register in the struct aspm_register_info. Read PCI_EXP_LNKCTL directly when needed. This means we can use the PCI_EXP_LNKCTL_ASPM_* bits directly instead of the similar but different PCIE_LINK_STATE_* bits. No functional change intended. [bhelgaas: drop get_aspm_enable() and read LNKCTL once directly] Link: https://lore.kernel.org/r/20201015193039.12585-6-helgaas@kernel.org Signed-off-by: Saheed O. Bolarinwa <refactormyself@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-10-16PCI/ASPM: Remove struct aspm_register_info.supportSaheed O. Bolarinwa
Previously we stored the "ASPM Support" field from the Link Capabilities register in the struct aspm_register_info. Read the Link Capabilities directly when needed and remove it from the struct aspm_register_info. No functional change intended. [bhelgaas: remove pci_dev cached copy since LNKCAP isn't truly read-only, add PCI_EXP_LNKCAP_ASPM_L0S & PCI_EXP_LNKCAP_ASPM_L1, check them directly instead of adding aspm_support()] Link: https://lore.kernel.org/r/20201015193039.12585-5-helgaas@kernel.org Signed-off-by: Saheed O. Bolarinwa <refactormyself@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-10-16PCI/ASPM: Use 'parent' and 'child' for readabilityBjorn Helgaas
Other users of link->pdev and link->downstream, e.g., pcie_aspm_cap_init(), pcie_config_aspm_l1ss(), and pcie_config_aspm_link(), use "parent" and "child" as local names. Do the same in aspm_calc_l1ss_info() for readability. No functional change intended. Link: https://lore.kernel.org/r/20201015193039.12585-4-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-10-16PCI/ASPM: Move LTR path check to where it's usedBjorn Helgaas
pcie_get_aspm_reg() mostly reads ASPM-related registers, but in some cases it also updates the value read from PCI_L1SS_CAP based on LTR properties. Move this update to the point where the value is used to make the code more readable. No functional change intended, although previously we could clear PCI_L1SS_CAP_ASPM_L1_2 for both ends of the link, and now we'll only do it for the downstream end of a link. This shouldn't matter because we always test that bit by ANDing l1ss_cap for the upstream and downstream ends. Link: https://lore.kernel.org/r/20201015193039.12585-3-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-10-16PCI/ASPM: Move pci_clear_and_set_dword() earlierBjorn Helgaas
Move pci_clear_and_set_dword() earlier in file to prepare for future patch. No functional change intended. Link: https://lore.kernel.org/r/20201015193039.12585-2-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-07-17PCI/ASPM: Add missing newline in sysfs 'policy'Xiongfeng Wang
When I cat ASPM parameter 'policy' by sysfs, it displays as follows. Add a newline for easy reading. Other sysfs attributes already include a newline. [root@localhost ~]# cat /sys/module/pcie_aspm/parameters/policy [default] performance powersave powersupersave [root@localhost ~]# Fixes: 7d715a6c1ae5 ("PCI: add PCI Express ASPM support") Link: https://lore.kernel.org/r/1594972765-10404-1-git-send-email-wangxiongfeng2@huawei.com Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-05-07PCI/ASPM: Allow ASPM on links to PCIe-to-PCI/PCI-X BridgesKai-Heng Feng
7d715a6c1ae5 ("PCI: add PCI Express ASPM support") added the ability for Linux to enable ASPM, but for some undocumented reason, it didn't enable ASPM on links where the downstream component is a PCIe-to-PCI/PCI-X Bridge. Remove this exclusion so we can enable ASPM on these links. The Dell OptiPlex 7080 mentioned in the bugzilla has a TI XIO2001 PCIe-to-PCI Bridge. Enabling ASPM on the link leading to it allows the Intel SoC to enter deeper Package C-states, which is a significant power savings. [bhelgaas: commit log] Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=207571 Link: https://lore.kernel.org/r/20200505173423.26968-1-kai.heng.feng@canonical.com Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-03-28PCI/ASPM: Reduce severity of common clock config messageChris Packham
When the UEFI/BIOS or bootloader has not initialised a PCIe device we would get the following message: kern.warning: pci 0000:00:01.0: ASPM: current common clock configuration is broken, reconfiguring "warning" and "broken" are slightly misleading. On an embedded system it is quite possible for the bootloader to avoid configuring PCIe devices if they are not needed. Downgrade the message to pci_info() and change "broken" to "inconsistent" since we fix up the inconsistency in the code immediately following the message (and emit an error if that fails). Link: https://lore.kernel.org/r/20200323035530.11569-1-chris.packham@alliedtelesis.co.nz Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-03-18PCI/ASPM: Clear the correct bits when enabling L1 substatesYicong Yang
In pcie_config_aspm_l1ss(), we cleared the wrong bits when enabling ASPM L1 Substates. Instead of the L1.x enable bits (PCI_L1SS_CTL1_L1SS_MASK, 0xf), we cleared the Link Activation Interrupt Enable bit (PCI_L1SS_CAP_L1_PM_SS, 0x10). Clear the L1.x enable bits before writing the new L1.x configuration. [bhelgaas: changelog] Fixes: aeda9adebab8 ("PCI/ASPM: Configure L1 substate settings") Link: https://lore.kernel.org/r/1584093227-1292-1-git-send-email-yangyicong@hisilicon.com Signed-off-by: Yicong Yang <yangyicong@hisilicon.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: stable@vger.kernel.org # v4.11+
2019-11-21PCI/ASPM: Remove PCIEASPM_DEBUG Kconfig option and related codeHeiner Kallweit
Previously, CONFIG_PCIEASPM_DEBUG enabled "link_state" and "clk_ctl" sysfs files that controlled ASPM. We believe these files were rarely if ever used. We recently added sysfs ASPM controls that are always present, so the debug code is no longer needed. Removing this debug code has been discussed for quite some time, see e.g. [0]. Remove PCIEASPM_DEBUG and the related code. [0] https://lore.kernel.org/lkml/20180727202619.GD173328@bhelgaas-glaptop.roam.corp.google.com/ Link: https://lore.kernel.org/r/ec935d8e-c084-3938-f1d1-748617596b25@gmail.com Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-11-21PCI/ASPM: Add sysfs attributes for controlling ASPM link statesHeiner Kallweit
Add sysfs attributes to Endpoints and other Upstream Ports to control ASPM, Clock PM, and L1 PM Substates. The new attributes are: /sys/devices/pci*/.../link/clkpm /sys/devices/pci*/.../link/l0s_aspm /sys/devices/pci*/.../link/l1_aspm /sys/devices/pci*/.../link/l1_1_aspm /sys/devices/pci*/.../link/l1_2_aspm /sys/devices/pci*/.../link/l1_1_pcipm /sys/devices/pci*/.../link/l1_2_pcipm An attribute is only visible if both ends of the Link leading to the device support the state. Writing y/1/on to the file enables the state; n/0/off disables it. These attributes can be used to tune the power/performance tradeoff for individual devices. [bhelgaas: commit log, rename directory to "link"] Link: https://lore.kernel.org/r/b1c83f8a-9bf6-eac5-82d0-cf5b90128fbf@gmail.com Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-10-15PCI/ASPM: Add pcie_aspm_get_link()Heiner Kallweit
Factor out getting the link associated with a pci_dev and use this helper where appropriate. In addition this helper will be used in a subsequent patch of this series. Link: https://lore.kernel.org/r/19d33770-29de-a9af-4d85-f2b30269d383@gmail.com Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-10-15PCI/ASPM: Allow re-enabling Clock PMHeiner Kallweit
Previously Clock PM could not be re-enabled after being disabled by pci_disable_link_state() because clkpm_capable was reset. Change this by adding a clkpm_disable field similar to aspm_disable. Link: https://lore.kernel.org/r/4e8a66db-7d53-4a66-c26c-f0037ffaa705@gmail.com Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-10-15PCI/ASPM: Add L1 PM substate support to pci_disable_link_state()Heiner Kallweit
Add support for disabling states L1.1 and L1.2 to pci_disable_link_state(). Allow separate control of ASPM and PCI PM L1 substates. Link: https://lore.kernel.org/r/d81f8036-c236-6463-48e7-ebcdcda85bba@gmail.com Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-10-15PCI/ASPM: Remove pcie_aspm_enabled() unnecessary lockingBjorn Helgaas
The lifetime of the link_state structure (bridge->link_state) is not the same as the lifetime of "bridge" itself. The link_state is allocated by pcie_aspm_init_link_state() after children of the bridge have been enumerated, and it is deallocated by pcie_aspm_exit_link_state() after all children of the bridge (but not the bridge itself) have been removed. Previously pcie_aspm_enabled() acquired aspm_lock to ensure that link_state was not deallocated while we're looking at it. But the fact that the caller of pcie_aspm_enabled() holds a reference to @pdev means there's always at least one child of the bridge, which means link_state can't be deallocated. Remove the unnecessary locking in pcie_aspm_enabled(). Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-09-23Merge tag 'pci-v5.4-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Consolidate _HPP/_HPX stuff in pci-acpi.c and simplify it (Krzysztof Wilczynski) - Fix incorrect PCIe device types and remove dev->has_secondary_link to simplify code that deals with upstream/downstream ports (Mika Westerberg) - After suspend, restore Resizable BAR size bits correctly for 1MB BARs (Sumit Saxena) - Enable PCI_MSI_IRQ_DOMAIN support for RISC-V (Wesley Terpstra) Virtualization: - Add ACS quirks for iProc PAXB (Abhinav Ratna), Amazon Annapurna Labs (Ali Saidi) - Move sysfs SR-IOV functions to iov.c (Kelsey Skunberg) - Remove group write permissions from sysfs sriov_numvfs, sriov_drivers_autoprobe (Kelsey Skunberg) Hotplug: - Simplify pciehp indicator control (Denis Efremov) Peer-to-peer DMA: - Allow P2P DMA between root ports for whitelisted bridges (Logan Gunthorpe) - Whitelist some Intel host bridges for P2P DMA (Logan Gunthorpe) - DMA map P2P DMA requests that traverse host bridge (Logan Gunthorpe) Amazon Annapurna Labs host bridge driver: - Add DT binding and controller driver (Jonathan Chocron) Hyper-V host bridge driver: - Fix hv_pci_dev->pci_slot use-after-free (Dexuan Cui) - Fix PCI domain number collisions (Haiyang Zhang) - Use instance ID bytes 4 & 5 as PCI domain numbers (Haiyang Zhang) - Fix build errors on non-SYSFS config (Randy Dunlap) i.MX6 host bridge driver: - Limit DBI register length (Stefan Agner) Intel VMD host bridge driver: - Fix config addressing issues (Jon Derrick) Layerscape host bridge driver: - Add bar_fixed_64bit property to endpoint driver (Xiaowei Bao) - Add CONFIG_PCI_LAYERSCAPE_EP to build EP/RC drivers separately (Xiaowei Bao) Mediatek host bridge driver: - Add MT7629 controller support (Jianjun Wang) Mobiveil host bridge driver: - Fix CPU base address setup (Hou Zhiqiang) - Make "num-lanes" property optional (Hou Zhiqiang) Tegra host bridge driver: - Fix OF node reference leak (Nishka Dasgupta) - Disable MSI for root ports to work around design problem (Vidya Sagar) - Add Tegra194 DT binding and controller support (Vidya Sagar) - Add support for sideband pins and slot regulators (Vidya Sagar) - Add PIPE2UPHY support (Vidya Sagar) Misc: - Remove unused pci_block_cfg_access() et al (Kelsey Skunberg) - Unexport pci_bus_get(), etc (Kelsey Skunberg) - Hide PM, VC, link speed, ATS, ECRC, PTM constants and interfaces in the PCI core (Kelsey Skunberg) - Clean up sysfs DEVICE_ATTR() usage (Kelsey Skunberg) - Mark expected switch fall-through (Gustavo A. R. Silva) - Propagate errors for optional regulators and PHYs (Thierry Reding) - Fix kernel command line resource_alignment parameter issues (Logan Gunthorpe)" * tag 'pci-v5.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (112 commits) PCI: Add pci_irq_vector() and other stubs when !CONFIG_PCI arm64: tegra: Add PCIe slot supply information in p2972-0000 platform arm64: tegra: Add configuration for PCIe C5 sideband signals PCI: tegra: Add support to enable slot regulators PCI: tegra: Add support to configure sideband pins PCI: vmd: Fix shadow offsets to reflect spec changes PCI: vmd: Fix config addressing when using bus offsets PCI: dwc: Add validation that PCIe core is set to correct mode PCI: dwc: al: Add Amazon Annapurna Labs PCIe controller driver dt-bindings: PCI: Add Amazon's Annapurna Labs PCIe host bridge binding PCI: Add quirk to disable MSI-X support for Amazon's Annapurna Labs Root Port PCI/VPD: Prevent VPD access for Amazon's Annapurna Labs Root Port PCI: Add ACS quirk for Amazon Annapurna Labs root ports PCI: Add Amazon's Annapurna Labs vendor ID MAINTAINERS: Add PCI native host/endpoint controllers designated reviewer PCI: hv: Use bytes 4 and 5 from instance ID as the PCI domain numbers dt-bindings: PCI: tegra: Add PCIe slot supplies regulator entries dt-bindings: PCI: tegra: Add sideband pins configuration entries PCI: tegra: Add Tegra194 PCIe support PCI: Get rid of dev->has_secondary_link flag ...
2019-09-23Merge branch 'pci/enumeration'Bjorn Helgaas
- Consolidate _HPP & _HPX code in pci-acpi.h and remove unnecessary struct hotplug_program_ops (Krzysztof Wilczynski) - Fixup PCIe device types to remove the need for dev->has_secondary_link (Mika Westerberg) * pci/enumeration: PCI: Get rid of dev->has_secondary_link flag PCI: Make pcie_downstream_port() available outside of access.c PCI/ACPI: Remove unnecessary struct hotplug_program_ops PCI/ACPI: Move _HPP & _HPX functions to pci-acpi.c PCI/ACPI: Rename _HPX structs from hpp_* to hpx_*
2019-09-07PCI: Get rid of dev->has_secondary_link flagMika Westerberg
In some systems, the Device/Port Type in the PCI Express Capabilities register incorrectly identifies upstream ports as downstream ports. d0751b98dfa3 ("PCI: Add dev->has_secondary_link to track downstream PCIe links") addressed this by adding pci_dev.has_secondary_link, which is set for downstream ports. But this is confusing because pci_pcie_type() sometimes gives the wrong answer, and it's not obvious that we should use pci_dev.has_secondary_link instead. Reduce the confusion by correcting the type of the port itself so that pci_pcie_type() returns the actual type regardless of what the Device/Port Type register claims it is. Update the users to call pci_pcie_type() and pcie_downstream_port() accordingly, and remove pci_dev.has_secondary_link completely. Link: https://lore.kernel.org/linux-pci/20190703133953.GK128603@google.com/ Suggested-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://lore.kernel.org/r/20190822085553.62697-2-mika.westerberg@linux.intel.com Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-08-28PCI: Move ASPM declarations to linux/pci.hKrzysztof Wilczynski
Move ASPM definitions and function prototypes from include/linux/pci-aspm.h to include/linux/pci.h so users only need to include <linux/pci.h>: PCIE_LINK_STATE_L0S PCIE_LINK_STATE_L1 PCIE_LINK_STATE_CLKPM pci_disable_link_state() pci_disable_link_state_locked() pcie_no_aspm() No functional changes intended. Link: https://lore.kernel.org/r/20190827095620.11213-1-kw@linux.com Signed-off-by: Krzysztof Wilczynski <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-08-12PCI/ASPM: Add pcie_aspm_enabled()Rafael J. Wysocki
Add a function checking whether or not PCIe ASPM has been enabled for a given device. It will be used by the NVMe driver to decide how to handle the device during system suspend. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Keith Busch <keith.busch@intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com>
2019-06-21PCI: let pci_disable_link_state propagate errorsHeiner Kallweit
Drivers may rely on pci_disable_link_state() having disabled certain ASPM link states. If OS can't control ASPM then pci_disable_link_state() turns into a no-op w/o informing the caller. The driver therefore may falsely assume the respective ASPM link states are disabled. Let pci_disable_link_state() propagate errors to the caller, enabling the caller to react accordingly. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-06PCI: Rework pcie_retrain_link() wait loopStefan Mätje
Transform wait code to a "do {} while (time_before())" loop as recommended by reviewer. No functional change intended. Signed-off-by: Stefan Mätje <stefan.maetje@esd.eu> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-04-06PCI: Work around Pericom PCIe-to-PCI bridge Retrain Link erratumStefan Mätje
Due to an erratum in some Pericom PCIe-to-PCI bridges in reverse mode (conventional PCI on primary side, PCIe on downstream side), the Retrain Link bit needs to be cleared manually to allow the link training to complete successfully. If it is not cleared manually, the link training is continuously restarted and no devices below the PCI-to-PCIe bridge can be accessed. That means drivers for devices below the bridge will be loaded but won't work and may even crash because the driver is only reading 0xffff. See the Pericom Errata Sheet PI7C9X111SLB_errata_rev1.2_102711.pdf for details. Devices known as affected so far are: PI7C9X110, PI7C9X111SL, PI7C9X130. Add a new flag, clear_retrain_link, in struct pci_dev. Quirks for affected devices set this bit. Note that pcie_retrain_link() lives in aspm.c because that's currently the only place we use it, but this erratum is not specific to ASPM, and we may retrain links for other reasons in the future. Signed-off-by: Stefan Mätje <stefan.maetje@esd.eu> [bhelgaas: apply regardless of CONFIG_PCIEASPM] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> CC: stable@vger.kernel.org
2019-04-06PCI: Factor out pcie_retrain_link() functionStefan Mätje
Factor out pcie_retrain_link() to use for Pericom Retrain Link quirk. No functional change intended. Signed-off-by: Stefan Mätje <stefan.maetje@esd.eu> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> CC: stable@vger.kernel.org
2019-01-05Merge tag 'pci-v4.21-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - Remove unused lists from ASPM pcie_link_state (Frederick Lawler) - Fix Broadcom CNB20LE host bridge unintended sign extension (Colin Ian King) - Expand Kconfig "PF" acronyms (Randy Dunlap) - Update MAINTAINERS for arch/x86/kernel/early-quirks.c (Bjorn Helgaas) - Add missing include to drivers/pci.h (Alexandru Gagniuc) - Override Synopsys USB 3.x HAPS device class so dwc3-haps can claim it instead of xhci (Thinh Nguyen) - Clean up P2PDMA documentation (Randy Dunlap) - Allow runtime PM even if driver doesn't supply callbacks (Jarkko Nikula) - Remove status check after submitting Switchtec MRPC Firmware Download commands to avoid Completion Timeouts (Kelvin Cao) - Set Switchtec coherent DMA mask to allow 64-bit DMA (Boris Glimcher) - Fix Switchtec SWITCHTEC_IOCTL_EVENT_IDX_ALL flag overwrite issue (Joey Zhang) - Enable write combining for Switchtec MRPC Input buffers (Kelvin Cao) - Add Switchtec MRPC DMA mode support (Wesley Sheng) - Skip VF scanning on powerpc, which does this in firmware (Sebastian Ott) - Add Amlogic Meson PCIe controller driver and DT bindings (Yue Wang) - Constify histb dw_pcie_host_ops structure (Julia Lawall) - Support multiple power domains for imx6 (Leonard Crestez) - Constify layerscape driver data (Stefan Agner) - Update imx6 Kconfig to allow imx6 PCIe in imx7 kernel (Trent Piepho) - Support armada8k GPIO reset (Baruch Siach) - Support suspend/resume support on imx6 (Leonard Crestez) - Don't hard-code DesignWare DBI/ATU offst (Stephen Warren) - Skip i.MX6 PHY setup on i.MX7D (Andrey Smirnov) - Remove Jianguo Sun from HiSilicon STB maintainers (Lorenzo Pieralisi) - Mask DesignWare interrupts instead of disabling them to avoid lost interrupts (Marc Zyngier) - Add locking when acking DesignWare interrupts (Marc Zyngier) - Ack DesignWare interrupts in the proper callbacks (Marc Zyngier) - Use devm resource parser in mediatek (Honghui Zhang) - Remove unused mediatek "num-lanes" DT property (Honghui Zhang) - Add UniPhier PCIe controller driver and DT bindings (Kunihiko Hayashi) - Enable MSI for imx6 downstream components (Richard Zhu) * tag 'pci-v4.21-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (40 commits) PCI: imx: Enable MSI from downstream components s390/pci: skip VF scanning PCI/IOV: Add flag so platforms can skip VF scanning PCI/IOV: Factor out sriov_add_vfs() PCI: uniphier: Add UniPhier PCIe host controller support dt-bindings: PCI: Add UniPhier PCIe host controller description PCI: amlogic: Add the Amlogic Meson PCIe controller driver dt-bindings: PCI: meson: add DT bindings for Amlogic Meson PCIe controller arm64: dts: mt7622: Remove un-used property for PCIe arm: dts: mt7623: Remove un-used property for PCIe dt-bindings: PCI: MediaTek: Remove un-used property PCI: mediatek: Remove un-used variant in struct mtk_pcie_port MAINTAINERS: Remove Jianguo Sun from HiSilicon STB DWC entry PCI: dwc: Don't hard-code DBI/ATU offset PCI: imx: Add imx6sx suspend/resume support PCI: armada8k: Add support for gpio controlled reset signal PCI: dwc: Adjust Kconfig to allow IMX6 PCIe host on IMX7 PCI: dwc: layerscape: Constify driver data PCI: imx: Add multi-pd support PCI: Override Synopsys USB 3.x HAPS device class ...
2018-12-17PCI/ASPM: Remove unused lists from struct pcie_link_stateFrederick Lawler
ASPM does not make use of the children or link LIST_HEADs declared in struct pcie_link_state and defined in alloc_pcie_link_state(). Therefore, remove these lists. No functional change intended. Signed-off-by: Frederick Lawler <fred@fredlawl.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-12-03Revert "PCI/ASPM: Do not initialize link state when aspm_disabled is set"Bjorn Helgaas
This reverts commit 17c91487364fb33797ed84022564ee7544ac4945. Rafael found that this commit broke the SD card reader in his Acer Aspire S5. Details of the problem are in the bugzilla below. Fixes: 17c91487364f ("PCI/ASPM: Do not initialize link state when aspm_disabled is set") Link: https://bugzilla.kernel.org/show_bug.cgi?id=201801 Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-09-18PCI/ASPM: Do not initialize link state when aspm_disabled is setPatrick Talbert
Now that ASPM is configured for *all* PCIe devices at boot, a problem is seen with systems that set the FADT NO_ASPM bit. This bit indicates that the OS should not alter the ASPM state, but when pcie_aspm_init_link_state() runs it only checks for !aspm_support_enabled. This misses the ACPI_FADT_NO_ASPM case because that is setting aspm_disabled. The result is systems may hang at boot after 1302fcf; avoidable if they boot with pcie_aspm=off (sets !aspm_support_enabled). Fix this by having aspm_init_link_state() check for either !aspm_support_enabled or acpm_disabled. Link: https://bugzilla.kernel.org/show_bug.cgi?id=201001 Fixes: 1302fcf0d03e ("PCI: Configure *all* devices, not just hot-added ones") Signed-off-by: Patrick Talbert <ptalbert@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-09-17PCI/ASPM: Fix link_state teardown on device removalLukas Wunner
Upon removal of the last device on a bus, the link_state of the bridge leading to that bus is sought to be torn down by having pci_stop_dev() call pcie_aspm_exit_link_state(). When ASPM was originally introduced by commit 7d715a6c1ae5 ("PCI: add PCI Express ASPM support"), it determined whether the device being removed is the last one by calling list_empty() on the bridge's subordinate devices list. That didn't work because the device is only removed from the list slightly later in pci_destroy_dev(). Commit 3419c75e15f8 ("PCI: properly clean up ASPM link state on device remove") attempted to fix it by calling list_is_last(), but that's not correct either because it checks whether the device is at the *end* of the list, not whether it's the last one *left* in the list. If the user removes the device which happens to be at the end of the list via sysfs but other devices are preceding the device in the list, the link_state is torn down prematurely. The real fix is to move the invocation of pcie_aspm_exit_link_state() to pci_destroy_dev() and reinstate the call to list_empty(). Remove a duplicate check for dev->bus->self because pcie_aspm_exit_link_state() already contains an identical check. Fixes: 7d715a6c1ae5 ("PCI: add PCI Express ASPM support") Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Shaohua Li <shaohua.li@intel.com> Cc: stable@vger.kernel.org # v2.6.26
2018-08-06PCI/ASPM: Convert to use sysfs_match_string() helperAndy Shevchenko
The sysfs_match_string() helper returns index of the matching string in an array. Use it in pcie_aspm_set_policy() to simplify the code. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> [bhelgaas: squash sysfs_match_string() fix into original patch for issue Reported-by: Heiner Kallweit <hkallweit1@gmail.com>] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-04-18PCI/ASPM: Disable ASPM L1.2 Substate if we don't have LTRBjorn Helgaas
When in the ASPM L1.0 state (but not the PCI-PM L1.0 state), the most recent LTR value and the LTR_L1.2_THRESHOLD determines whether the link enters the L1.2 substate. If we don't have LTR enabled, prevent the use of ASPM L1.2. PCI-PM L1.2 may still be used because it doesn't depend on LTR_L1.2_THRESHOLD (see PCIe r4.0, sec 5.5.1). Tested-by: Srinath Mannam <srinath.mannam@broadcom.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-04-04Merge branch 'pci/misc'Bjorn Helgaas
- use PCI_EXP_DEVCTL2_COMP_TIMEOUT in rapidio/tsi721 (Bjorn Helgaas) - remove possible NULL pointer dereference in of_pci_bus_find_domain_nr() (Shawn Lin) - report quirk timings with dev_info (Bjorn Helgaas) - report quirks that take longer than 10ms (Bjorn Helgaas) - add and use Altera Vendor ID (Johannes Thumshirn) - tidy Makefiles and comments (Bjorn Helgaas) * pci/misc: PCI: Always define the of_node helpers PCI: Tidy comments PCI: Tidy Makefiles mcb: Add Altera PCI ID to mcb-pci PCI: Add Altera vendor ID PCI: Report quirks that take more than 10ms PCI: Report quirk timings with pci_info() instead of pr_debug() PCI: Fix NULL pointer dereference in of_pci_bus_find_domain_nr() rapidio/tsi721: use PCI_EXP_DEVCTL2_COMP_TIMEOUT macro
2018-03-19PCI: Tidy commentsBjorn Helgaas
Remove pointless comments that tell us the file name, remove blank line comments, follow multi-line comment conventions. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-02-28PCI/ASPM: Don't warn if already in common clock modeSinan Kaya
Previously we emitted a warning if we tried to configure common clock mode the link was already configured to common clock mode by the UEFI BIOS. Bail out silently in that case instead of emitting the warning: pci 0004:00:00.0: ASPM: Could not configure common clock Signed-off-by: Sinan Kaya <okaya@codeaurora.org> [bhelgaas: changelog] Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>
2018-02-28PCI/ASPM: Declare threshold_ns as u32, not u64Gustavo A. R. Silva
aspm_calc_l1ss_info() computes l1_2_threshold in microseconds as: l1_2_threshold = 2 + 4 + t_common_mode + t_power_on; where t_common_mode is at most 255us: PCI_L1SS_CAP_CM_RESTORE_TIME 0x0000ff00 <-- 8 bits; <256us and t_power_on is at most 31 * 100us = 3100us: PCI_L1SS_CAP_P_PWR_ON_VALUE 0x00f80000 <-- 5 bits; <32 PCI_L1SS_CAP_P_PWR_ON_SCALE 0x00030000 <-- *2us, *10us, or *100us So l1_2_threshold is at most 2 + 4 + 255 + 3100 = 3361, which means threshold_ns is at most 3361 * 1000 = 3361000, which easily fits in a u32. Declare threshold_ns as u32, not u64. This fixes a Coverity warning. Addresses-Coverity-ID: 1462501 Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> [bhelgaas: changelog] Signed-off-by: Bjorn Helgaas <helgaas@kernel.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
2018-01-31Merge branch 'pci/misc' into nextBjorn Helgaas
* pci/misc: PCI: Add dummy pci_irqd_intx_xlate() for CONFIG_PCI=n build PCI: Add wrappers for dev_printk() PCI: Remove unnecessary messages for memory allocation failures PCI: Add #defines for Completion Timeout Disable feature hinic: Replace PCI pool old API net: e100: Replace PCI pool old API block: DAC960: Replace PCI pool old API MAINTAINERS: Include more PCI files PCI: Remove unneeded kallsyms include powerpc/pci: Unroll two pass loop when scanning bridges powerpc/pci: Use for_each_pci_bridge() helper
2018-01-18PCI: Add wrappers for dev_printk()Frederick Lawler
Add PCI-specific dev_printk() wrappers and use them to simplify the code slightly. No functional change intended. Signed-off-by: Frederick Lawler <fred@fredlawl.com> [bhelgaas: squash into one patch] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-12-18PCI/ASPM: Calculate LTR_L1.2_THRESHOLD from device characteristicsBjorn Helgaas
Per PCIe r3.1, sec 5.5.1, LTR_L1.2_THRESHOLD determines whether we enter the L1.2 Link state: if L1.2 is enabled and downstream devices have reported that they can tolerate latency of at least LTR_L1.2_THRESHOLD, we must enter L1.2 when CLKREQ# is de-asserted. The implication is that LTR_L1.2_THRESHOLD is the time required to transition the Link from L0 to L1.2 and back to L0, and per sec 5.5.3.3.1, Figures 5-16 and 5-17, it appears that the absolute minimum time for those transitions would be T(POWER_OFF) + T(L1.2) + T(POWER_ON) + T(COMMONMODE). Therefore, compute LTR_L1.2_THRESHOLD as: 2us T(POWER_OFF) + 4us T(L1.2) + T(POWER_ON) + T(COMMONMODE) = LTR_L1.2_THRESHOLD Previously we set LTR_L1.2_THRESHOLD to a fixed value of 163840ns (163.84us): #define LTR_L1_2_THRESHOLD_BITS ((1 << 21) | (1 << 23) | (1 << 30)) ((1 << 21) | (1 << 23) | (1 << 30)) = 0x40a00000 LTR_L1.2_THRESHOLD_Value = (0x40a00000 & 0x03ff0000) >> 16 = 0xa0 = 160 LTR_L1.2_THRESHOLD_Scale = (0x40a00000 & 0xe0000000) >> 29 = 0x2 (* 1024ns) LTR_L1.2_THRESHOLD = 160 * 1024ns = 163840ns Obviously this doesn't account for the circuit characteristics of different implementations. Note that while firmware may enable LTR, Linux itself currently does not enable LTR. When L1.2 is enabled but LTR is not, LTR_L1.2_THRESHOLD is ignored and we always enter L1.2 when it is enabled and CLKREQ# is de-asserted. So this patch should not have any effect unless firmware enables LTR. Fixes: f1f0366dd6be ("PCI/ASPM: Calculate and save the L1.2 timing parameters") Link: https://www.coreboot.org/pipermail/coreboot-gerrit/2015-March/021134.html Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Vidya Sagar <vidyas@nvidia.com> Cc: Kenji Chen <kenji.chen@intel.com> Cc: Patrick Georgi <pgeorgi@google.com> Cc: Rajat Jain <rajatja@google.com>
2017-11-15Merge tag 'pci-v4.15-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - detach driver before tearing down procfs/sysfs (Alex Williamson) - disable PCIe services during shutdown (Sinan Kaya) - fix ASPM oops on systems with no Root Ports (Ard Biesheuvel) - fix ASPM LTR_L1.2_THRESHOLD programming (Bjorn Helgaas) - fix ASPM Common_Mode_Restore_Time computation (Bjorn Helgaas) - fix portdrv MSI/MSI-X vector allocation (Dongdong Liu, Bjorn Helgaas) - report non-fatal AER errors only to the affected endpoint (Gabriele Paoloni) - distribute bus numbers, MMIO, and I/O space among hotplug bridges to allow more devices to be hot-added (Mika Westerberg) - fix pciehp races during initialization and surprise link down (Mika Westerberg) - handle surprise-removed devices in PME handling (Qiang) - support resizable BARs for large graphics devices (Christian König) - expose SR-IOV offset, stride, and VF device ID via sysfs (Filippo Sironi) - create SR-IOV virtfn/physfn sysfs links before attaching driver (Stuart Hayes) - fix SR-IOV "ARI Capable Hierarchy" restore issue (Tony Nguyen) - enforce Kconfig IOV/REALLOC dependency (Sascha El-Sharkawy) - avoid slot reset if bridge itself is broken (Jan Glauber) - clean up pci_reset_function() path (Jan H. Schönherr) - make pci_map_rom() fail if the option ROM is invalid (Changbin Du) - convert timers to timer_setup() (Kees Cook) - move PCI_QUIRKS to PCI bus Kconfig menu (Randy Dunlap) - constify pci_dev_type and intel_mid_pci_ops (Bhumika Goyal) - remove unnecessary pci_dev, pci_bus, resource, pcibios_set_master() declarations (Bjorn Helgaas) - fix endpoint framework overflows and BUG()s (Dan Carpenter) - fix endpoint framework issues (Kishon Vijay Abraham I) - avoid broken Cavium CN8xxx bus reset behavior (David Daney) - extend Cavium ACS capability quirks (Vadim Lomovtsev) - support Synopsys DesignWare RC in ECAM mode (Ard Biesheuvel) - turn off dra7xx clocks cleanly on shutdown (Keerthy) - fix Faraday probe error path (Wei Yongjun) - support HiSilicon STB SoC PCIe host controller (Jianguo Sun) - fix Hyper-V interrupt affinity issue (Dexuan Cui) - remove useless ACPI warning for Hyper-V pass-through devices (Vitaly Kuznetsov) - support multiple MSI on iProc (Sandor Bodo-Merle) - support Layerscape LS1012a and LS1046a PCIe host controllers (Hou Zhiqiang) - fix Layerscape default error response (Minghuan Lian) - support MSI on Tango host controller (Marc Gonzalez) - support Tegra186 PCIe host controller (Manikanta Maddireddy) - use generic accessors on Tegra when possible (Thierry Reding) - support V3 Semiconductor PCI host controller (Linus Walleij) * tag 'pci-v4.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (85 commits) PCI/ASPM: Add L1 Substates definitions PCI/ASPM: Reformat ASPM register definitions PCI/ASPM: Use correct capability pointer to program LTR_L1.2_THRESHOLD PCI/ASPM: Account for downstream device's Port Common_Mode_Restore_Time PCI: xgene: Rename xgene_pcie_probe_bridge() to xgene_pcie_probe() PCI: xilinx: Rename xilinx_pcie_link_is_up() to xilinx_pcie_link_up() PCI: altera: Rename altera_pcie_link_is_up() to altera_pcie_link_up() PCI: Fix kernel-doc build warning PCI: Fail pci_map_rom() if the option ROM is invalid PCI: Move pci_map_rom() error path PCI: Move PCI_QUIRKS to the PCI bus menu alpha/PCI: Make pdev_save_srm_config() static PCI: Remove unused declarations PCI: Remove redundant pci_dev, pci_bus, resource declarations PCI: Remove redundant pcibios_set_master() declarations PCI/PME: Handle invalid data when reading Root Status PCI: hv: Use effective affinity mask PCI: pciehp: Do not clear Presence Detect Changed during initialization PCI: pciehp: Fix race condition handling surprise link down PCI: Distribute available resources to hotplug-capable bridges ...
2017-11-15Merge tag 'modules-for-v4.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux Pull module updates from Jessica Yu: "Summary of modules changes for the 4.15 merge window: - treewide module_param_call() cleanup, fix up set/get function prototype mismatches, from Kees Cook - minor code cleanups" * tag 'modules-for-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux: module: Do not paper over type mismatches in module_param_call() treewide: Fix function prototypes for module_param_call() module: Prepare to convert all module_param_call() prototypes kernel/module: Delete an error message for a failed memory allocation in add_module_usage()
2017-11-14PCI/ASPM: Add L1 Substates definitionsBjorn Helgaas
Add and use #defines for L1 Substate register fields instead of hard-coding the masks. Also update comments to use names from the spec. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Vidya Sagar <vidyas@nvidia.com>
2017-11-14PCI/ASPM: Use correct capability pointer to program LTR_L1.2_THRESHOLDBjorn Helgaas
Previously we programmed the LTR_L1.2_THRESHOLD in the parent (upstream) device using the capability pointer of the *child* (downstream) device, which corrupted some random word of the parent's config space. Use the parent's L1 SS capability pointer to program its LTR_L1.2_THRESHOLD. Fixes: aeda9adebab8 ("PCI/ASPM: Configure L1 substate settings") Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Vidya Sagar <vidyas@nvidia.com> CC: stable@vger.kernel.org # v4.11+ CC: Rajat Jain <rajatja@google.com>
2017-11-13PCI/ASPM: Account for downstream device's Port Common_Mode_Restore_TimeBjorn Helgaas
Every Port that supports the L1.2 substate advertises its Port Common_Mode_Restore_Time, i.e., the time the Port requires to re-establish common mode when exiting L1.2 (see PCIe r3.1, sec 7.33.2). Per sec 5.5.3.3.1, when exiting L1.2, the Downstream Port (the device at the upstream end of the link) must send TS1 training sequences for at least T(COMMONMODE) after it detects electrical idle exit on the Link. We want this to be long enough for both ends of the Link, so we should set it to the maximum of the Port Common_Mode_Restore_Time for the upstream and downstream components on the Link. Previously we only looked at the Port Common_Mode_Restore_Time of the upstream device, so if the downstream device required more time, we didn't program the upstream device's T(COMMONMODE) correctly. Fixes: f1f0366dd6be ("PCI/ASPM: Calculate and save the L1.2 timing parameters") Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Vidya Sagar <vidyas@nvidia.com> Acked-by: Rajat Jain <rajatja@google.com> CC: stable@vger.kernel.org # v4.11+
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-29 01:18:44 +0000