summaryrefslogtreecommitdiff
path: root/drivers/pci/host
AgeCommit message (Collapse)Author
2016-10-11PCI: armada: Remove redundant struct armada8k_pcie.baseBjorn Helgaas
The struct armada8k_pcie.base pointer is always a constant offset from struct pcie_port.dbi_base. Encode that offset in the register macros so we don't need to maintain the armada8k_pcie.base pointer. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-10-11PCI: armada: Add local base pointerBjorn Helgaas
Add a local "base" pointer, as is done for other uses, to simplify a subsequent patch. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-10-11PCI: armada: Remove unused platform dataBjorn Helgaas
The armada driver never uses the platform drvdata pointer, so don't bother setting it. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-10-11PCI: altera: Simplify TLP_CFG_DW1 usageBjorn Helgaas
TLP_CFG_DW1() was only used with altera->root_bus_nr and RP_DEVFN, so encode that directly into the macro so we don't have to clutter the uses with the TLP_REQ_ID() usage. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-10-11PCI: altera: Simplify TLB_CFG_DW0 usageBjorn Helgaas
All TLP_CFG_DW0() uses follow the same pattern based on the root bus number, so pull that into the macro itself to declutter the users. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-10-11PCI: altera: Rename altera_pcie_valid_config() to altera_pcie_valid_device()Bjorn Helgaas
Rename altera_pcie_valid_config() to altera_pcie_valid_device(). No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-10-11PCI: altera: Remove redundant platform_get_resource() return value checkBjorn Helgaas
devm_ioremap_resource() fails gracefully when given a NULL resource pointer, so we don't need to check separately for failure from platform_get_resource_byname(). Remove the redundant check. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-10-11PCI: altera: Remove unused platform dataBjorn Helgaas
The altera driver never uses the platform drvdata pointer, so don't bother setting it. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-10-11PCI: altera: Add local struct device pointersBjorn Helgaas
Use a local "struct device *dev" for brevity and consistency with other drivers. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-10-11PCI: aardvark: Remove unused platform dataBjorn Helgaas
The aardvark driver never uses the platform drvdata pointer, so don't bother setting it. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-10-11PCI: aardvark: Add local struct device pointersBjorn Helgaas
Use a local "struct device *dev" for brevity and consistency with other drivers. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-10-11PCI: spear: Clean up struct device usageBjorn Helgaas
For consistency with other drivers, use the struct device pointer from struct pcie_port whenever possible instead of relying on the platform_device pointer. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-10-11PCI: spear: Reorder struct spear13xx_pcieBjorn Helgaas
Reorder struct spear13xx_pcie to put generic fields first. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-10-11PCI: spear: Pass device-specific struct to internal functionsBjorn Helgaas
Only interfaces used from outside the driver, e.g., those called by the DesignWare core, need to accept pointers to the generic struct pcie_port. Internal interfaces can accept pointers to the device-specific struct, which makes them more straightforward. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-10-11PCI: spear: Remove unused constantsBjorn Helgaas
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-10-11PCI: designware-plat: Remove unused platform dataBjorn Helgaas
The designware-plat driver never uses the platform drvdata pointer, so don't bother setting it. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-10-11PCI: designware-plat: Add local struct device pointersBjorn Helgaas
Use a local "struct device *dev" for brevity and consistency with other drivers. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-10-11PCI: designware-plat: Remove redundant dw_plat_pcie.mem_baseBjorn Helgaas
Remove the struct dw_plat_pcie.mem_base member, which is only used as a temporary. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-10-11PCI: designware: Swap order of dw_pcie_writel_unroll() reg/val argumentsBjorn Helgaas
Swap order of dw_pcie_readl_unroll() arguments to match the "dev, pos, val" order used by pci_write_config_word() and other drivers. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-10-11PCI: designware: Uninline register accessorsBjorn Helgaas
The register accessors are not performance critical and small enough that the compiler can inline them itself if it makes sense. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-10-11PCI: designware: Export dw_pcie_readl_rc(), dw_pcie_writel_rc()Bjorn Helgaas
Export dw_pcie_readl_rc() and dw_pcie_writel_rc(). Many other drivers can use these instead of implementing their own versions. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-10-11PCI: designware: Swap order of dw_pcie_writel_rc() reg/val argumentsBjorn Helgaas
Swap order of dw_pcie_writel_rc() arguments to match the "dev, pos, val" order used by pci_write_config_word() and other drivers. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-10-11PCI: designware: Simplify pcie_host_ops.readl_rc() and .writel_rc() interfacesBjorn Helgaas
The struct pcie_host_ops.readl_rc() and .writel_rc() function pointers allow a driver to override the default DesignWare register accessors. Make the signature of the override functions the same as the default accessors. This makes the default dw_pcie_readl_rc() and the corresponding override more structurally similar: both will compute the final register address with "pp->dbi_base + reg". Previously dw_pcie_readl_rc() computed the address and passed it to the override. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-10-11PCI: designware: Simplify dw_pcie_readl_unroll(), dw_pcie_writel_unroll()Kishon Vijay Abraham I
dw_pcie_readl_unroll() and dw_pcie_writel_unroll() duplicate what dw_pcie_readl_rc() and dw_pcie_writel_rc() already do, so call them directly. [bhelgaas: reworked into patch series] Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-10-10PCI: xgene: Add local struct device pointersBjorn Helgaas
Use a local "struct device *dev" for brevity and consistency with other drivers. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-10-10PCI: rcar: Add local struct device pointersBjorn Helgaas
Use a local "struct device *dev" for brevity and consistency with other drivers. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Simon Horman <horms+renesas@verge.net.au>
2016-10-07Merge tag 'pci-v4.9-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Summary of PCI changes for the v4.9 merge window: Enumeration: - microblaze: Add multidomain support for procfs (Bharat Kumar Gogada) Resource management: - Ignore requested alignment for PROBE_ONLY and fixed resources (Yongji Xie) - Ignore requested alignment for VF BARs (Yongji Xie) PCI device hotplug: - Make core explicitly non-modular (Paul Gortmaker) PCIe native device hotplug: - Rename pcie_isr() locals for clarity (Bjorn Helgaas) - Return IRQ_NONE when we can't read interrupt status (Bjorn Helgaas) - Remove unnecessary guard (Bjorn Helgaas) - Clean up dmesg "Slot(%s)" messages (Bjorn Helgaas) - Remove useless pciehp_get_latch_status() calls (Bjorn Helgaas) - Clear attention LED on device add (Keith Busch) - Allow exclusive userspace control of indicators (Keith Busch) - Process all hotplug events before looking for new ones (Mayurkumar Patel) - Don't re-read Slot Status when queuing hotplug event (Mayurkumar Patel) - Don't re-read Slot Status when handling surprise event (Mayurkumar Patel) - Make explicitly non-modular (Paul Gortmaker) Power management: - Afford direct-complete to devices with non-standard PM (Lukas Wunner) - Query platform firmware for device power state (Lukas Wunner) - Recognize D3cold in pci_update_current_state() (Lukas Wunner) - Avoid unnecessary resume after direct-complete (Lukas Wunner) - Make explicitly non-modular (Paul Gortmaker) Virtualization: - Mark Atheros AR9580 to avoid bus reset (Maik Broemme) - Check for pci_setup_device() failure in pci_iov_add_virtfn() (Po Liu) MSI: - Enable PCI_MSI_IRQ_DOMAIN support for ARC (Joao Pinto) AER: - Remove aerdriver.nosourceid kernel parameter (Bjorn Helgaas) - Remove aerdriver.forceload kernel parameter (Bjorn Helgaas) - Fix aer_probe() kernel-doc comment (Cao jin) - Add bus flag to skip source ID matching (Jon Derrick) - Avoid memory allocation in interrupt handling path (Jon Derrick) - Cache capability position (Keith Busch) - Make explicitly non-modular (Paul Gortmaker) - Remove duplicate AER severity translation (Tyler Baicar) - Send correct severity to calculate AER severity (Tyler Baicar) Precision Time Measurement: - Add Precision Time Measurement (PTM) support (Jonathan Yong) - Add PTM clock granularity information (Bjorn Helgaas) - Add pci_enable_ptm() for drivers to enable PTM on endpoints (Bjorn Helgaas) Generic host bridge driver: - Fix pci_remap_iospace() failure path (Lorenzo Pieralisi) - Make explicitly non-modular (Paul Gortmaker) Altera host bridge driver: - Remove redundant platform_get_resource() return value check (Bjorn Helgaas) - Poll for link training status after retraining the link (Ley Foon Tan) - Rework config accessors for use without a struct pci_bus (Ley Foon Tan) - Move retrain from fixup to altera_pcie_host_init() (Ley Foon Tan) - Make MSI explicitly non-modular (Paul Gortmaker) - Make explicitly non-modular (Paul Gortmaker) - Relax device number checking to allow SR-IOV (Po Liu) ARM Versatile host bridge driver: - Fix pci_remap_iospace() failure path (Lorenzo Pieralisi) Axis ARTPEC-6 host bridge driver: - Drop __init from artpec6_add_pcie_port() (Niklas Cassel) Freescale i.MX6 host bridge driver: - Make explicitly non-modular (Paul Gortmaker) Intel VMD host bridge driver: - Add quirk for AER to ignore source ID (Jon Derrick) - Allocate IRQ lists with correct MSI-X count (Jon Derrick) - Convert to use pci_alloc_irq_vectors() API (Jon Derrick) - Eliminate vmd_vector member from list type (Jon Derrick) - Eliminate index member from IRQ list (Jon Derrick) - Synchronize with RCU freeing MSI IRQ descs (Keith Busch) - Request userspace control of PCIe hotplug indicators (Keith Busch) - Move VMD driver to drivers/pci/host (Keith Busch) Marvell Aardvark host bridge driver: - Fix pci_remap_iospace() failure path (Lorenzo Pieralisi) - Remove redundant dev_err call in advk_pcie_probe() (Wei Yongjun) Microsoft Hyper-V host bridge driver: - Use zero-length array in struct pci_packet (Dexuan Cui) - Use pci_function_description[0] in struct definitions (Dexuan Cui) - Remove the unused 'wrk' in struct hv_pcibus_device (Dexuan Cui) - Handle vmbus_sendpacket() failure in hv_compose_msi_msg() (Dexuan Cui) - Handle hv_pci_generic_compl() error case (Dexuan Cui) - Use list_move_tail() instead of list_del() + list_add_tail() (Wei Yongjun) NVIDIA Tegra host bridge driver: - Fix pci_remap_iospace() failure path (Lorenzo Pieralisi) - Remove redundant _data suffix (Thierry Reding) - Use of_device_get_match_data() (Thierry Reding) Qualcomm host bridge driver: - Make explicitly non-modular (Paul Gortmaker) Renesas R-Car host bridge driver: - Consolidate register space lookup and ioremap (Bjorn Helgaas) - Don't disable/unprepare clocks on prepare/enable failure (Geert Uytterhoeven) - Add multi-MSI support (Grigory Kletsko) - Fix pci_remap_iospace() failure path (Lorenzo Pieralisi) - Fix some checkpatch warnings (Sergei Shtylyov) - Try increasing PCIe link speed to 5 GT/s at boot (Sergei Shtylyov) Rockchip host bridge driver: - Add DT bindings for Rockchip PCIe controller (Shawn Lin) - Add Rockchip PCIe controller support (Shawn Lin) - Improve the deassert sequence of four reset pins (Shawn Lin) - Fix wrong transmitted FTS count (Shawn Lin) - Increase the Max Credit update interval (Rajat Jain) Samsung Exynos host bridge driver: - Make explicitly non-modular (Paul Gortmaker) ST Microelectronics SPEAr13xx host bridge driver: - Make explicitly non-modular (Paul Gortmaker) Synopsys DesignWare host bridge driver: - Return data directly from dw_pcie_readl_rc() (Bjorn Helgaas) - Exchange viewport of `MEMORYs' and `CFGs/IOs' (Dong Bo) - Check LTSSM training bit before deciding link is up (Jisheng Zhang) - Move link wait definitions to .c file (Joao Pinto) - Wait for iATU enable (Joao Pinto) - Add iATU Unroll feature (Joao Pinto) - Fix pci_remap_iospace() failure path (Lorenzo Pieralisi) - Make explicitly non-modular (Paul Gortmaker) - Relax device number checking to allow SR-IOV (Po Liu) - Keep viewport fixed for IO transaction if num_viewport > 2 (Pratyush Anand) - Remove redundant platform_get_resource() return value check (Wei Yongjun) TI DRA7xx host bridge driver: - Make explicitly non-modular (Paul Gortmaker) TI Keystone host bridge driver: - Propagate request_irq() failure (Wei Yongjun) Xilinx AXI host bridge driver: - Keep both legacy and MSI interrupt domain references (Bharat Kumar Gogada) - Clear interrupt register for invalid interrupt (Bharat Kumar Gogada) - Clear correct MSI set bit (Bharat Kumar Gogada) - Dispose of MSI virtual IRQ (Bharat Kumar Gogada) - Make explicitly non-modular (Paul Gortmaker) - Relax device number checking to allow SR-IOV (Po Liu) Xilinx NWL host bridge driver: - Expand error logging (Bharat Kumar Gogada) - Enable all MSI interrupts using MSI mask (Bharat Kumar Gogada) - Make explicitly non-modular (Paul Gortmaker) Miscellaneous: - Drop CONFIG_KEXEC_CORE ifdeffery (Lukas Wunner) - portdrv: Make explicitly non-modular (Paul Gortmaker) - Make DPC explicitly non-modular (Paul Gortmaker)" * tag 'pci-v4.9-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (105 commits) x86/PCI: VMD: Move VMD driver to drivers/pci/host PCI: rockchip: Fix wrong transmitted FTS count PCI: rockchip: Improve the deassert sequence of four reset pins PCI: rockchip: Increase the Max Credit update interval PCI: rcar: Try increasing PCIe link speed to 5 GT/s at boot PCI/AER: Fix aer_probe() kernel-doc comment PCI: Ignore requested alignment for VF BARs PCI: Ignore requested alignment for PROBE_ONLY and fixed resources PCI: Avoid unnecessary resume after direct-complete PCI: Recognize D3cold in pci_update_current_state() PCI: Query platform firmware for device power state PCI: Afford direct-complete to devices with non-standard PM PCI/AER: Cache capability position PCI/AER: Avoid memory allocation in interrupt handling path x86/PCI: VMD: Request userspace control of PCIe hotplug indicators PCI: pciehp: Allow exclusive userspace control of indicators ACPI / APEI: Send correct severity to calculate AER severity PCI/AER: Remove duplicate AER severity translation x86/PCI: VMD: Synchronize with RCU freeing MSI IRQ descs x86/PCI: VMD: Eliminate index member from IRQ list ...
2016-10-06PCI: designware: Rename dw_pcie_valid_config() to dw_pcie_valid_device()Bjorn Helgaas
Rename dw_pcie_valid_config() to dw_pcie_valid_device() and use the result directly as a boolean value instead of testing against 0. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-10-05Merge branch 'pci/host-vmd' into nextBjorn Helgaas
* pci/host-vmd: x86/PCI: VMD: Move VMD driver to drivers/pci/host x86/PCI: VMD: Synchronize with RCU freeing MSI IRQ descs x86/PCI: VMD: Eliminate index member from IRQ list x86/PCI: VMD: Eliminate vmd_vector member from list type x86/PCI: VMD: Convert to use pci_alloc_irq_vectors() API x86/PCI: VMD: Allocate IRQ lists with correct MSI-X count PCI: Use positive flags in pci_alloc_irq_vectors() PCI: Update "pci=resource_alignment" documentation Conflicts: drivers/pci/host/Kconfig drivers/pci/host/Makefile
2016-10-05Merge branches 'pci/host-aardvark', 'pci/host-altera', 'pci/host-artpec', ↵Bjorn Helgaas
'pci/host-designware', 'pci/host-hv', 'pci/host-keystone', 'pci/host-rcar', 'pci/host-rockchip', 'pci/host-tegra' and 'pci/host-xilinx' into next * pci/host-aardvark: PCI: aardvark: Remove redundant dev_err call in advk_pcie_probe() * pci/host-altera: PCI: altera: Remove redundant platform_get_resource() return value check PCI: altera: Move retrain from fixup to altera_pcie_host_init() PCI: altera: Rework config accessors for use without a struct pci_bus PCI: altera: Poll for link training status after retraining the link * pci/host-artpec: PCI: artpec6: Drop __init from artpec6_add_pcie_port() * pci/host-designware: PCI: designware: Remove redundant platform_get_resource() return value check PCI: designware: Exchange viewport of `MEMORYs' and `CFGs/IOs' PCI: designware: Keep viewport fixed for IO transaction if num_viewport > 2 PCI: designware: Check LTSSM training bit before deciding link is up PCI: designware: Add iATU Unroll feature PCI: designware: Wait for iATU enable PCI: designware: Move link wait definitions to .c file PCI: designware: Return data directly from dw_pcie_readl_rc() * pci/host-hv: PCI: hv: Handle hv_pci_generic_compl() error case PCI: hv: Handle vmbus_sendpacket() failure in hv_compose_msi_msg() PCI: hv: Remove the unused 'wrk' in struct hv_pcibus_device PCI: hv: Use pci_function_description[0] in struct definitions PCI: hv: Use zero-length array in struct pci_packet PCI: hv: Use list_move_tail() instead of list_del() + list_add_tail() * pci/host-keystone: PCI: keystone: Propagate request_irq() failure * pci/host-rcar: PCI: rcar: Try increasing PCIe link speed to 5 GT/s at boot PCI: rcar: Fix some checkpatch warnings PCI: rcar: Add multi-MSI support PCI: rcar: Don't disable/unprepare clocks on prepare/enable failure PCI: rcar: Consolidate register space lookup and ioremap * pci/host-rockchip: PCI: rockchip: Fix wrong transmitted FTS count PCI: rockchip: Improve the deassert sequence of four reset pins PCI: rockchip: Increase the Max Credit update interval PCI: rockchip: Add Rockchip PCIe controller support dt-bindings: PCI: rockchip: Add DT bindings for Rockchip PCIe controller * pci/host-tegra: PCI: tegra: Use of_device_get_match_data() PCI: tegra: Remove redundant _data suffix * pci/host-xilinx: microblaze/PCI: Add multidomain support for procfs PCI: xilinx: Dispose of MSI virtual IRQ PCI: xilinx: Clear correct MSI set bit PCI: xilinx: Clear interrupt register for invalid interrupt PCI: xilinx: Keep both legacy and MSI interrupt domain references PCI: xilinx-nwl: Enable all MSI interrupts using MSI mask PCI: xilinx-nwl: Expand error logging Conflicts: drivers/pci/host/pcie-xilinx.c
2016-10-04x86/PCI: VMD: Move VMD driver to drivers/pci/hostKeith Busch
Move the driver source and Kconfig to the PCI host bridge drivers directory and move the config option to a more appropriate sub-menu instead of occupying the top-level location. Update the Kconfig option with the X86_64 dependency that was implicitly included from the previous location, and add information about the module name when built as a loadable module. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Jon Derrick <jonathan.derrick@intel.com>
2016-10-04PCI: rockchip: Fix wrong transmitted FTS countShawn Lin
If the expected number of FTS aren't received by RC when exiting from L0s, the LTSSM will fall into recover state, which means it will need to send TS for retraining which makes the latency of exiting from L0s a little longer than expected. This issue is caused by an incorrect reset value of FTS count on PLC1 register (offset 0x4). The expected value for Gen1/2 should be more than 240 and we may leave a little margin here. Fix this before starting Gen1 training which will make TS1 contain the correct FTS count. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-10-04PCI: rockchip: Improve the deassert sequence of four reset pinsShawn Lin
Per TRM, we need to deassert the four reset pins simultaneously. Currently the reset framework doesn't support that so we did it one by one. It seems no side effect found but it does impact the state machine of controller, so sometimes the change speed bit is not set when sending training sequence from recover state. After the silicon RTL review from SoC guys, we don't need to do the sequence recommended by TRM, and could just move the deassert of mgmt_sticky_rst to the first place. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-10-04PCI: rockchip: Increase the Max Credit update intervalRajat Jain
Increase the likelihood of link state to automatically go to L1 and save some power. The default credit update interval of 7.5 us results in the rootport sending UpdateFC-P and UpdateFC-NP packets too often, thus resulting in the link never going to L1, and always staying in L0/L0s. The value 24 us was chosen after some experiments and peeking over the PCIe bus to see that we do enter L1 substate when there is not enough traffic on the PCIe bus. Signed-off-by: Rajat Jain <rajatja@google.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Shawn Lin <shawn.lin@rock-chips.com>
2016-10-04PCI: rcar: Try increasing PCIe link speed to 5 GT/s at bootSergei Shtylyov
The PCIe link speed is initially set to 2.5 GT/s. Try to increase the link speed to 5 GT/s. Based on original patch by Grigory Kletsko <grigory.kletsko@cogentembedded.com>. [bhelgaas: remove "Trying speed up" message, remove unused SPCHG] Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Simon Horman <horms+renesas@verge.net.au>
2016-10-03Merge branch 'pci/virtualization' into nextBjorn Helgaas
* pci/virtualization: PCI: xilinx: Relax device number checking to allow SR-IOV PCI: designware: Relax device number checking to allow SR-IOV PCI: altera: Relax device number checking to allow SR-IOV PCI: Check for pci_setup_device() failure in pci_iov_add_virtfn() PCI: Mark Atheros AR9580 to avoid bus reset
2016-10-03Merge branch 'pci/enumeration' into nextBjorn Helgaas
* pci/enumeration: PCI: tegra: Fix pci_remap_iospace() failure path PCI: generic: Fix pci_remap_iospace() failure path PCI: rcar: Fix pci_remap_iospace() failure path PCI: versatile: Fix pci_remap_iospace() failure path PCI: designware: Fix pci_remap_iospace() failure path PCI: aardvark: Fix pci_remap_iospace() failure path
2016-09-14PCI: artpec6: Drop __init from artpec6_add_pcie_port()Niklas Cassel
artpec6_add_pcie_port() is called from artpec6_pcie_probe(), which is not marked __init. It is wrong to call an __init function from a non-__init one, so remove __init from artpec6_add_pcie_port(). [bhelgaas: changelog] Signed-off-by: Niklas Cassel <niklas.cassel@axis.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-09-14PCI: rcar: Fix some checkpatch warningsSergei Shtylyov
The R-Car PCIe driver causes 13 warnings from scripts/checkpatch.pl -- let's fix at least 10 easier ones: - line over 80 characters; - blank line missing after declarations; - statements not starting on a tabstop. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Simon Horman <horms+renesas@verge.net.au>
2016-09-14PCI: rcar: Add multi-MSI supportGrigory Kletsko
Implement the MSI .setup_irqs() method which enables allocation of several MSIs at once. [Sergei Shtylyov: removed unrelated/unneeded changes, fixed too long lines, reordered the variable declarations, reworded the summary/description.] Signed-off-by: Grigory Kletsko <grigory.kletsko@cogentembedded.com> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Simon Horman <horms+renesas@verge.net.au>
2016-09-13PCI: xilinx: Dispose of MSI virtual IRQBharat Kumar Gogada
Dispose of virtual IRQ being created for MSI interrupts. Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Michal Simek <michal.simek@xilinx.com>
2016-09-13PCI: xilinx: Clear correct MSI set bitBharat Kumar Gogada
Kernel provides virtual IRQ number at teardown. Get hwirq number from virtual IRQ and clear correct MSI set bit. Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Michal Simek <michal.simek@xilinx.com>
2016-09-13PCI: xilinx: Clear interrupt register for invalid interruptBharat Kumar Gogada
The interrupt decode register is not being cleared if an invalid interrupt arises. Clear the decode register in this case. Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Michal Simek <michal.simek@xilinx.com>
2016-09-13PCI: xilinx: Keep both legacy and MSI interrupt domain referencesBharat Kumar Gogada
When built with MSI support, the legacy domain reference was being overwritten with MSI. Create two separate domains for MSI and legacy interrupts. Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Michal Simek <michal.simek@xilinx.com>
2016-09-13PCI: xilinx-nwl: Enable all MSI interrupts using MSI maskBharat Kumar Gogada
The current mask enables and allows only one MSI interrupt on each MSI line. Enable all MSI interrupts, which will also support Endpoints with multi-MSI support. Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-09-13PCI: xilinx-nwl: Expand error loggingBharat Kumar Gogada
The current driver logs PCIe core errors. Add logging for individual core events. [bhelgaas: changelog] Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-09-12PCI: rcar: Don't disable/unprepare clocks on prepare/enable failureGeert Uytterhoeven
If clk_prepare_enable() fails, we must not call clk_disable_unprepare() in the error path. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-09-12PCI: altera: Remove redundant platform_get_resource() return value checkBjorn Helgaas
devm_ioremap_resource() fails gracefully when given a NULL resource pointer, so we don't need to check separately for failure from platform_get_resource_byname(). Remove the redundant check. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-09-12PCI: altera: Move retrain from fixup to altera_pcie_host_init()Ley Foon Tan
Previously we used a PCI early fixup to initiate a link retrain on Altera devices. But Altera PCIe IP can be configured as either a Root Port or an Endpoint, and they might have same vendor ID, so the fixup would be run for both. We only want to initiate a link retrain for Altera Root Port devices, not for Endpoints, so move the link retrain functionality from the fixup to altera_pcie_host_init(). [bhelgaas: changelog] Signed-off-by: Ley Foon Tan <lftan@altera.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-09-12PCI: xilinx: Relax device number checking to allow SR-IOVPo Liu
Previously we only allowed device 0 to be directly attached to the root port. But SR-IOV devices may use non-zero device numbers for VFs. Remove the restriction that only device 0 may be attached to a root port. [bhelgaas: changelog] Signed-off-by: Po Liu <po.liu@nxp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-02 02:37:12 +0000