summaryrefslogtreecommitdiff
path: root/drivers/pci/controller
AgeCommit message (Collapse)Author
2019-09-23Merge branch 'remotes/lorenzo/pci/dwc'Bjorn Helgaas
- Make kirin_dw_pcie_ops constant (Nishka Dasgupta) - Make DesignWare "num-lanes" property optional and remove from relevant DTs (Hou Zhiqiang) * remotes/lorenzo/pci/dwc: arm64: dts: fsl: Remove num-lanes property from PCIe nodes ARM: dts: ls1021a: Remove num-lanes property from PCIe nodes PCI: dwc: Return directly when num-lanes is not found dt-bindings: PCI: designware: Remove the num-lanes from Required properties PCI: kirin: Make structure kirin_dw_pcie_ops constant
2019-09-23Merge branch 'remotes/lorenzo/pci/al'Bjorn Helgaas
- Add driver for Amazon Annapurna Labs PCIe controller (Jonathan Chocron) - Disable MSI-X since Annapurna Labs advertises it, but it's broken (Jonathan Chocron) - Disable VPD since Annapurna Labs advertises it, but it's broken (Jonathan Chocron) - Add ACS quirk since Annapurna Labs doesn't support ACS but does provide some equivalent protections (Ali Saidi) * remotes/lorenzo/pci/al: PCI: dwc: Add validation that PCIe core is set to correct mode PCI: dwc: al: Add Amazon Annapurna Labs PCIe controller driver dt-bindings: PCI: Add Amazon's Annapurna Labs PCIe host bridge binding PCI: Add quirk to disable MSI-X support for Amazon's Annapurna Labs Root Port PCI/VPD: Prevent VPD access for Amazon's Annapurna Labs Root Port PCI: Add ACS quirk for Amazon Annapurna Labs root ports PCI: Add Amazon's Annapurna Labs vendor ID # Conflicts: # drivers/pci/quirks.c
2019-09-16PCI: dwc: Add validation that PCIe core is set to correct modeJonathan Chocron
Some PCIe controllers can be set to either Host or EP according to some early boot FW. To make sure there is no discrepancy (e.g. FW configured the port to EP mode while the DT specifies it as a host bridge or vice versa), a check has been added for each mode. Signed-off-by: Jonathan Chocron <jonnyc@amazon.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com> Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
2019-09-16PCI: dwc: al: Add Amazon Annapurna Labs PCIe controller driverJonathan Chocron
This driver is DT based and utilizes the DesignWare APIs. It allows using a smaller ECAM range for a larger bus range - usually an entire bus uses 1MB of address space, but the driver can use it for a larger number of buses. This is achieved by using a HW mechanism which allows changing the BUS part of the "final" outgoing config transaction. There are 2 HW regs, one which is basically a bitmask determining which bits to take from the AXI transaction itself and another which holds the complementary part programmed by the driver. All link initializations are handled by the boot FW. Signed-off-by: Jonathan Chocron <jonnyc@amazon.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com>
2019-08-22PCI: dwc: Return directly when num-lanes is not foundHou Zhiqiang
The num-lanes is optional since it is not needed on some platforms that bring up the link in firmware. The link programming is based on the num-lanes properties (which is optional); if it is not present code must return instead of fiddling with the lanes value to print an error message. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com>
2019-08-21PCI: kirin: Make structure kirin_dw_pcie_ops constantNishka Dasgupta
Static variable kirin_dw_pcie_ops, of type dw_pcie_ops, is used only once, when it is assigned to the constant field ops of variable pci (having type dw_pcie) so kirin_dw_pcie_ops is never modified. Make it constant to protect it from unintended modification. Issue found with Coccinelle. Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com>
2019-07-24PCI: Use devm_add_action_or_reset()Fuqian Huang
devm_add_action_or_reset() is a helper function which internally calls devm_add_action(). If the devm_add_action() fails, it will execute the action mentioned and return the error code. Use devm_add_action_or_reset() to reduce source code size (avoid writing the action twice) and reduce the likelihood of bugs. Link: https://lore.kernel.org/r/20190708123354.12127-1-huangfq.daxian@gmail.com Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-07-12Merge branch 'pci/trivial'Bjorn Helgaas
- Fix typos and whitespace errors (Bjorn Helgaas) * pci/trivial: PCI: Fix typos and whitespace errors
2019-07-12Merge branch 'remotes/lorenzo/pci/xilinx'Bjorn Helgaas
- Fix Xilinx NWL multi-MSI vector aliasing issue (Bharat Kumar Gogada) * remotes/lorenzo/pci/xilinx: PCI: xilinx-nwl: Fix Multi MSI data programming
2019-07-12Merge branch 'remotes/lorenzo/pci/tegra'Bjorn Helgaas
- Reorganize Tegra AFI/PHY/REFCLK/etc functions (Manikanta Maddireddy) - Mask Tegra AFI_INTR in runtime suspend (Manikanta Maddireddy) - Fix Tegra AFI/PCIe powerup sequence (Manikanta Maddireddy) - Add Tegra124, Tegra132, Tegra210, and Tegra186 support for Gen2 link speed (Manikanta Maddireddy) - Advertise Tegra AER support (Manikanta Maddireddy) - Program Tegra210 UPHY settings (Manikanta Maddireddy) - Enable Tegra opportunistic UpdateFC and ACK (Manikanta Maddireddy) - Disable Tegra AFI dynamic clock gating (Manikanta Maddireddy) - Process Tegra pending DLL transactions before entering L1 or L2 to prevent receiver errors (Manikanta Maddireddy) - Enable Tegra xclk clock clamping in L1 (Manikanta Maddireddy) - Increase Tegra deskew retry time (Manikanta Maddireddy) - Work around Tegra hardware RAW erratum (Manikanta Maddireddy) - Update Tegra210 flow control timer frequency (Manikanta Maddireddy) - Work around Tegra Gen1/Gen2 link number negotiation issue (Manikanta Maddireddy) - Work around Tegra PLLE power down issue (Manikanta Maddireddy) - Program Tegra20 to support cacheable upstream transactions (Manikanta Maddireddy) - Log Tegra PRSNT_SENSE_IRQ as debug, not err (Manikanta Maddireddy) - Add register offset for third Root Port on Tegra186 and Tegra30 (Manikanta Maddireddy) - Document Tegra PCIe DPD pinctrl property (Manikanta Maddireddy) - Put Tegra PEX CLK & BIAS pads in DPD mode to reduce power usage when powergated (Manikanta Maddireddy) - Add generic DT binding for "reset-gpios" property (Manikanta Maddireddy) - Add Tegra support for GPIO-based PERST# (Manikanta Maddireddy) - Enable Relaxed Ordering only for Tegra20 & Tegra30 (Vidya Sagar) * remotes/lorenzo/pci/tegra: PCI: tegra: Enable Relaxed Ordering only for Tegra20 & Tegra30 PCI: tegra: Change link retry log level to debug PCI: tegra: Add support for GPIO based PERST# PCI: Add DT binding for "reset-gpios" property PCI: tegra: Put PEX CLK & BIAS pads in DPD mode dt-bindings: pci: tegra: Document PCIe DPD pinctrl optional prop PCI: tegra: Add AFI_PEX2_CTRL reg offset as part of SoC struct PCI: tegra: Change PRSNT_SENSE IRQ log to debug PCI: tegra: Program AFI_CACHE_BAR_{0,1}_{ST,SZ} registers only for Tegra20 PCI: tegra: Fix PLLE power down issue due to CLKREQ# signal PCI: tegra: Set target speed as Gen1 before starting LTSSM PCI: tegra: Update flow control timer frequency in Tegra210 PCI: tegra: Add SW fixup for RAW violations PCI: tegra: Increase the deskew retry time PCI: tegra: Enable PCIe xclk clock clamping PCI: tegra: Process pending DLL transactions before entering L1 or L2 PCI: tegra: Disable AFI dynamic clock gating PCI: tegra: Enable opportunistic UpdateFC and ACK PCI: tegra: Program UPHY electrical settings for Tegra210 PCI: tegra: Advertise PCIe Advanced Error Reporting (AER) capability PCI: tegra: Add PCIe Gen2 link speed support PCI: tegra: Fix PCIe host power up sequence PCI: tegra: Mask AFI_INTR in runtime suspend PCI: tegra: Rearrange Tegra PCIe driver functions PCI: tegra: Handle failure cases in tegra_pcie_power_on() soc/tegra: pmc: Export tegra_powergate_power_on()
2019-07-12Merge branch 'remotes/lorenzo/pci/qcom'Bjorn Helgaas
- Move qcom driver to bulk clock API (Bjorn Andersson) - Add Qualcomm QCS404 PCIe controller support (Bjorn Andersson) - Ensure Qualcomm PERST is asserted for at least 100ms (Niklas Cassel) * remotes/lorenzo/pci/qcom: PCI: qcom: Ensure that PERST is asserted for at least 100 ms PCI: qcom: Add QCS404 PCIe controller support dt-bindings: PCI: qcom: Add QCS404 to the binding PCI: qcom: Use clk bulk API for 2.4.0 controllers
2019-07-12Merge branch 'remotes/lorenzo/pci/mobiveil'Bjorn Helgaas
- Unify mobiveil register accessors (Hou Zhiqiang) - Remove MSI_FLAG_MULTI_PCI_MSI since mobiveil hardware doesn't support Multiple MSI (Hou Zhiqiang) - Program outbound windows with base address from DT instead of assuming zero (Hou Zhiqiang) - Skip "safe" list traversal when it's unnecessary (Hou Zhiqiang) - Initialize WIN_NUM_0 explicitly for CFG outbound transactions (Hou Zhiqiang) - Use WIN_NUM_0 for MEM inbound transactions (Hou Zhiqiang) - Fix up mobiveil Class Code to PCI_CLASS_BRIDGE_PCI (Hou Zhiqiang) - Wait for link-up before enumerating devices, not while initializing host (Hou Zhiqiang) - Move IRQ chained handler setup out of DT code (Hou Zhiqiang) - Set primary/secondary/subordinate bus numbers (Hou Zhiqiang) - Fix "valid device" check to allow root bus device 0 to be multi-function (Hou Zhiqiang) - Make DT "gpio_slave" and "apb_csr" properties optional (Hou Zhiqiang) - Refactor MEM/IO outbound window initialization (Hou Zhiqiang) - Fix validity check for inbound/outbound window programming (Hou Zhiqiang) - Initialize and preserve window control bits (Hou Zhiqiang) - Fix 64-bit outbound window setup (both CPU and PCI addresses) (Hou Zhiqiang) - Move IO port setup to host init (Hou Zhiqiang) - Fix infinite loop in INTx ISR (Hou Zhiqiang) - Fix INTx interrupt clearing to avoid missed interrupts (Hou Zhiqiang) * remotes/lorenzo/pci/mobiveil: PCI: mobiveil: Fix INTx interrupt clearing in mobiveil_pcie_isr() PCI: mobiveil: Fix infinite-loop in the INTx handling function PCI: mobiveil: Move PCIe PIO enablement out of inbound window routine PCI: mobiveil: Add upper 32-bit PCI base address setup in inbound window PCI: mobiveil: Add upper 32-bit CPU base address setup in outbound window PCI: mobiveil: Mask out hardcoded bits in inbound/outbound windows setup PCI: mobiveil: Clear the control fields before updating it PCI: mobiveil: Add configured inbound windows counter PCI: mobiveil: Fix the valid check for inbound and outbound windows PCI: mobiveil: Clean-up program_{ib/ob}_windows() PCI: mobiveil: Remove an unnecessary return value check PCI: mobiveil: Fix error return values PCI: mobiveil: Refactor the MEM/IO outbound window initialization PCI: mobiveil: Make some register updates more readable PCI: mobiveil: Reformat the code for readability dt-bindings: PCI: mobiveil: Change gpio_slave and apb_csr to optional PCI: mobiveil: Fix devfn check in mobiveil_pcie_valid_device() PCI: mobiveil: Initialize Primary/Secondary/Subordinate bus numbers PCI: mobiveil: Move IRQ chained handler setup out of DT parse PCI: mobiveil: Move the link up waiting out of mobiveil_host_init() PCI: mobiveil: Fix the Class Code field PCI: mobiveil: Use the 1st inbound window for MEM inbound transactions PCI: mobiveil: Use WIN_NUM_0 explicitly for CFG outbound window PCI: mobiveil: Update the resource list traversal function PCI: mobiveil: Fix PCI base address in MEM/IO outbound windows PCI: mobiveil: Remove the flag MSI_FLAG_MULTI_PCI_MSI PCI: mobiveil: Unify register accessors
2019-07-12Merge branch 'remotes/lorenzo/pci/hv'Bjorn Helgaas
- Fix Hyper-V use-after-free in eject path (Dexuan Cui) * remotes/lorenzo/pci/hv: PCI: hv: Fix a use-after-free bug in hv_eject_device_work()
2019-07-12Merge branch 'remotes/lorenzo/pci/dwc'Bjorn Helgaas
- Add dwc API support to de-initialize host (Vidya Sagar) - Clean up dwc DBI,ATU read and write APIs (Vidya Sagar) - Export dwc APIs to support .remove() so drivers can be modular (Vidya Sagar) - Simplify imx6 Kconfig dependencies (Leonard Crestez) - Fix dra7xx build error when !CONFIG_GPIOLIB (YueHaibing) * remotes/lorenzo/pci/dwc: PCI: dwc: pci-dra7xx: Fix compilation when !CONFIG_GPIOLIB PCI: imx6: Simplify Kconfig depends on PCI: dwc: Export APIs to support .remove() implementation PCI: dwc: Cleanup DBI,ATU read and write APIs PCI: dwc: Add API support to de-initialize host
2019-07-12Merge branch 'remotes/lorenzo/pci/armada'Bjorn Helgaas
- Add Armada8k PHYs support (Miquel Raynal) * remotes/lorenzo/pci/armada: PCI: armada8k: Add PHYs support
2019-07-09PCI: dwc: pci-dra7xx: Fix compilation when !CONFIG_GPIOLIBYueHaibing
If CONFIG_GPIOLIB is not selected the compilation results in the following build errors: drivers/pci/controller/dwc/pci-dra7xx.c: In function dra7xx_pcie_probe: drivers/pci/controller/dwc/pci-dra7xx.c:777:10: error: implicit declaration of function devm_gpiod_get_optional; did you mean devm_regulator_get_optional? [-Werror=implicit-function-declaration] reset = devm_gpiod_get_optional(dev, NULL, GPIOD_OUT_HIGH); drivers/pci/controller/dwc/pci-dra7xx.c:778:45: error: ‘GPIOD_OUT_HIGH’ undeclared (first use in this function); did you mean ‘GPIOF_INIT_HIGH’? reset = devm_gpiod_get_optional(dev, NULL, GPIOD_OUT_HIGH); ^~~~~~~~~~~~~~ GPIOF_INIT_HIGH Fix them by including the appropriate header file. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> [lorenzo.pieralisi@arm.com: commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-07-09PCI: Fix typos and whitespace errorsBjorn Helgaas
Fix typos in drivers/pci. Comment and whitespace changes only. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
2019-07-08PCI: mobiveil: Fix INTx interrupt clearing in mobiveil_pcie_isr()Hou Zhiqiang
The current INTx handling function clears all interrupts after handling the first pending; this can potentially cause missing INTx detection. Fix the code to clear only the handled INTx IRQ. Fixes: 9af6bcb11e12 ("PCI: mobiveil: Add Mobiveil PCIe Host Bridge IP driver") Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Minghuan Lian <Minghuan.Lian@nxp.com> Reviewed-by: Subrahmanya Lingappa <l.subrahmanya@mobiveil.co.in> Acked-by: Karthikeyan Mitran <m.karthikeyan@mobiveil.co.in> Tested-by: Karthikeyan Mitran <m.karthikeyan@mobiveil.co.in>
2019-07-08PCI: mobiveil: Fix infinite-loop in the INTx handling functionHou Zhiqiang
In the loop handling INTx interrupts in mobiveil_pcie_isr(), there is no code to update the loop control variable, which is causing an infinite loop. Fix the code by reading the interrupt status registers inside the loop. Fixes: 9af6bcb11e12 ("PCI: mobiveil: Add Mobiveil PCIe Host Bridge IP driver") Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Minghuan Lian <Minghuan.Lian@nxp.com> Reviewed-by: Subrahmanya Lingappa <l.subrahmanya@mobiveil.co.in> Acked-by: Karthikeyan Mitran <m.karthikeyan@mobiveil.co.in> Tested-by: Karthikeyan Mitran <m.karthikeyan@mobiveil.co.in>
2019-07-08PCI: mobiveil: Move PCIe PIO enablement out of inbound window routineHou Zhiqiang
Move the PCIe PIO master enablement to function mobiveil_host_init(). Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Minghuan Lian <Minghuan.Lian@nxp.com> Reviewed-by: Subrahmanya Lingappa <l.subrahmanya@mobiveil.co.in>
2019-07-08PCI: mobiveil: Add upper 32-bit PCI base address setup in inbound windowHou Zhiqiang
Current code erroneously sets-up the lower 32-bit PCI base address in the inbound window, which results in inbound transactions not working in 64-bit platforms. Fixes: 9af6bcb11e12 ("PCI: mobiveil: Add Mobiveil PCIe Host Bridge IP driver") Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Minghuan Lian <Minghuan.Lian@nxp.com> Reviewed-by: Subrahmanya Lingappa <l.subrahmanya@mobiveil.co.in>
2019-07-08PCI: mobiveil: Add upper 32-bit CPU base address setup in outbound windowHou Zhiqiang
Current code erroneously sets-up only the lower 32-bit CPU base address in the outbound window, which results in outbound transactions not working in 64-bit platforms. Fix it. Fixes: 9af6bcb11e12 ("PCI: mobiveil: Add Mobiveil PCIe Host Bridge IP driver") Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Minghuan Lian <Minghuan.Lian@nxp.com> Reviewed-by: Subrahmanya Lingappa <l.subrahmanya@mobiveil.co.in>
2019-07-08PCI: mobiveil: Mask out hardcoded bits in inbound/outbound windows setupHou Zhiqiang
The lower 10 bits of window size field are hardcoded to zero in HW so they can't really be changed but the lower 10-bit of PAB_AXI_AMAP_CTRL register are used for control fields, so while programming inbound and outbout windows decoding we should mask out the lower 10-bit of window size to prevent overriding the control bits. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Minghuan Lian <Minghuan.Lian@nxp.com> Reviewed-by: Subrahmanya Lingappa <l.subrahmanya@mobiveil.co.in>
2019-07-08PCI: mobiveil: Clear the control fields before updating itHou Zhiqiang
While programming the inbound and outbound windows in program_{ib/ob}_windows() we shoud clear the control fields in the registers before programming it with a new value to prevent stale bits from older configuration. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Minghuan Lian <Minghuan.Lian@nxp.com> Reviewed-by: Subrahmanya Lingappa <l.subrahmanya@mobiveil.co.in>
2019-07-08PCI: mobiveil: Add configured inbound windows counterHou Zhiqiang
Current code only keeps track of the number of outbound windows configured but it does not for inbound windows. Add a counter to keep track of initialized inbound windows. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Minghuan Lian <Minghuan.Lian@nxp.com> Reviewed-by: Subrahmanya Lingappa <l.subrahmanya@mobiveil.co.in>
2019-07-08PCI: mobiveil: Fix the valid check for inbound and outbound windowsHou Zhiqiang
In program_ib/ob_windows() check the window index from the function parameter instead of the total number of initialized windows to determine if the specified window is valid. Fixes: 9af6bcb11e12 ("PCI: mobiveil: Add Mobiveil PCIe Host Bridge IP driver") Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Minghuan Lian <Minghuan.Lian@nxp.com> Reviewed-by: Subrahmanya Lingappa <l.subrahmanya@mobiveil.co.in>
2019-07-08PCI: mobiveil: Clean-up program_{ib/ob}_windows()Hou Zhiqiang
In function program_ob_windows(), remove the redundant read operations to registers PAB_AXI_AMAP_AXI_WIN and PAB_AXI_AMAP_PEX_WIN_H, and remove the useless definition of 'value'. Rename the parameter 'config_io_bit' to 'type' and then remove the definition of 'type'. In function program_ib_windows(), remove the definitions of 'pio_ctrl_val' and 'amap_ctrl_dw' and reduce to only one variable 'value' to keep the temporary value read from registers. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Minghuan Lian <Minghuan.Lian@nxp.com> Reviewed-by: Subrahmanya Lingappa <l.subrahmanya@mobiveil.co.in>
2019-07-08PCI: mobiveil: Remove an unnecessary return value checkHou Zhiqiang
The memory for the host controller private structure (struct mobiveil_pcie) is allocated together with the pci_host_bridge structure in function devm_pci_alloc_host_bridge(), so it is unnecessary to check the return value when get the private structure pointer. Remove the useless check. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Minghuan Lian <Minghuan.Lian@nxp.com> Reviewed-by: Subrahmanya Lingappa <l.subrahmanya@mobiveil.co.in>
2019-07-08PCI: mobiveil: Fix error return valuesHou Zhiqiang
Some error return values in the host controller driver are either unconventional or plain wrong. Update them all with the expected return values. Signed-off-by: Hou Zhiqiang <Zhinqiang.Hou@nxp.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Minghuan Lian <Minghuan.Lian@nxp.com> Reviewed-by: Subrahmanya Lingappa <l.subrahmanya@mobiveil.co.in>
2019-07-08PCI: mobiveil: Refactor the MEM/IO outbound window initializationHou Zhiqiang
Move the resource type check into an if/else block and only set-up the outbound window for MEM and IO resource. No functional change intended. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Minghuan Lian <Minghuan.Lian@nxp.com>
2019-07-08PCI: mobiveil: Make some register updates more readableHou Zhiqiang
To make some register updates more readable use a temporary value to hold the register value and carry out the update. Change the register update sequence to: - Read out the original value from the target register - Update the value - Program the updated value back to the register Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Minghuan Lian <Minghuan.Lian@nxp.com>
2019-07-08PCI: mobiveil: Reformat the code for readabilityHou Zhiqiang
Reformat the code to make it more readable. No functional change intended. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Minghuan Lian <Minghuan.Lian@nxp.com>
2019-07-08PCI: mobiveil: Fix devfn check in mobiveil_pcie_valid_device()Hou Zhiqiang
Current check for devfn number in mobiveil_pci_valid_device() is wrong in that it flags as invalid functions present in PCI device 0 in the root bus while it is perfectly valid to access all functions in PCI device 0 in the root bus. Update the check in mobiveil_pci_valid_device() to fix the issue. Fixes: 9af6bcb11e12 ("PCI: mobiveil: Add Mobiveil PCIe Host Bridge IP driver") Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Minghuan Lian <Minghuan.Lian@nxp.com>
2019-07-08PCI: mobiveil: Initialize Primary/Secondary/Subordinate bus numbersHou Zhiqiang
The reset value of Primary, Secondary and Subordinate bus numbers is zero which is a broken setup. Program a sensible default value for Primary/Secondary/Subordinate bus numbers. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Minghuan Lian <Minghuan.Lian@nxp.com> Reviewed-by: Subrahmanya Lingappa <l.subrahmanya@mobiveil.co.in>
2019-07-08PCI: mobiveil: Move IRQ chained handler setup out of DT parseHou Zhiqiang
The irq_set_chained_handler_and_data() call is not dependent on device tree firmware so it should be moved out of the DT parsing function for clarity. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> [lorenzo.pieralisi@arm.com: rewritten commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Minghuan Lian <Minghuan.Lian@nxp.com> Reviewed-by: Subrahmanya Lingappa <l.subrahmanya@mobiveil.co.in>
2019-07-08PCI: mobiveil: Move the link up waiting out of mobiveil_host_init()Hou Zhiqiang
The host initializing sequence does not depend on the PCIe link being up, so move the link up check right before the code scanning the root bus for enumeration. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Minghuan Lian <Minghuan.Lian@nxp.com> Reviewed-by: Subrahmanya Lingappa <l.subrahmanya@mobiveil.co.in>
2019-07-08PCI: mobiveil: Fix the Class Code fieldHou Zhiqiang
Fix up the Class Code field in PCI configuration space and set it to PCI_CLASS_BRIDGE_PCI. Move the Class Code fixup to function mobiveil_host_init() where it belongs. Fixes: 9af6bcb11e12 ("PCI: mobiveil: Add Mobiveil PCIe Host Bridge IP driver") Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Minghuan Lian <Minghuan.Lian@nxp.com> Reviewed-by: Subrahmanya Lingappa <l.subrahmanya@mobiveil.co.in>
2019-07-08PCI: mobiveil: Use the 1st inbound window for MEM inbound transactionsHou Zhiqiang
The inbound and outbound windows have completely separate control registers sets in the host controller MMIO space. Windows control register are accessed through an MMIO base address and an offset that depends on the window index. Since inbound and outbound windows control registers are completely separate there is no real need to use different window indexes in the inbound/outbound windows initialization routines to prevent clashing. To fix this inconsistency, change the MEM inbound window index to 0, mirroring the outbound window set-up. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> [lorenzo.pieralisi@arm.com: update commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Minghuan Lian <Minghuan.Lian@nxp.com> Reviewed-by: Subrahmanya Lingappa <l.subrahmanya@mobiveil.co.in>
2019-07-08PCI: mobiveil: Use WIN_NUM_0 explicitly for CFG outbound windowHou Zhiqiang
As the .map_bus() use the WIN_NUM_0 for CFG transactions, it is appropriate to pass WIN_NUM_0 explicitly when initializing the CFG outbound window rather than implicitly relying on the ob_wins_configure counter. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Minghuan Lian <Minghuan.Lian@nxp.com> Reviewed-by: Subrahmanya Lingappa <l.subrahmanya@mobiveil.co.in>
2019-07-08PCI: mobiveil: Update the resource list traversal functionHou Zhiqiang
Code that executes the resource list traversal does not need to delete any node therefore using the *_safe() API version is useless. Replace function resource_list_for_each_entry_safe() with the resource_list_for_each_entry() counterpart. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Minghuan Lian <Minghuan.Lian@nxp.com> Reviewed-by: Subrahmanya Lingappa <l.subrahmanya@mobiveil.co.in>
2019-07-08PCI: mobiveil: Fix PCI base address in MEM/IO outbound windowsHou Zhiqiang
The outbound memory windows PCI base addresses should be taken from the 'ranges' property of DT node to setup MEM/IO outbound windows decoding correctly instead of being hardcoded to zero. Update the code to retrieve the PCI base address for each range and use it to program the outbound windows address decoders Fixes: 9af6bcb11e12 ("PCI: mobiveil: Add Mobiveil PCIe Host Bridge IP driver") Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Minghuan Lian <Minghuan.Lian@nxp.com> Reviewed-by: Subrahmanya Lingappa <l.subrahmanya@mobiveil.co.in>
2019-07-08PCI: mobiveil: Remove the flag MSI_FLAG_MULTI_PCI_MSIHou Zhiqiang
The Mobiveil internal MSI controller requires separate target addresses, one per MSI vector; this is clearly incompatible with the Multiple MSI feature, which requires the same target address for all vectors requested by an endpoint (ie the Message Address field in the MSI Capability structure), so the multi MSI feature is clearly not supported by the host controller driver. Remove the flag MSI_FLAG_MULTI_PCI_MSI and with it multi MSI support, fixing the misconfiguration. Fixes: 1e913e58335f ("PCI: mobiveil: Add MSI support") Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> [lorenzo.pieralisi@arm.com: commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Minghuan Lian <Minghuan.Lian@nxp.com>
2019-07-08PCI: mobiveil: Unify register accessorsHou Zhiqiang
It is confusing to have two sets of functions to read/write registers, some with csr_readl()/csr_writel(), while others with read_paged_register()/write_paged_register(). In the register space the lower 3KB of 4KB PCIe configure space can be accessed directly and higher 1KB through a simple paging mechanism. Unify the register accessors in csr_readl() and csr_writel() by comparing the register offset with page access boundary 3KB in the accessor internal so that the paging mechanism is hidden behind the csr_read()/write() common function calls. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Minghuan Lian <Minghuan.Lian@nxp.com> Reviewed-by: Subrahmanya Lingappa <l.subrahmanya@mobiveil.co.in>
2019-07-05PCI: imx6: Simplify Kconfig depends onLeonard Crestez
The imx6 driver can be used on imx6sx without enabling support for imx6q or imx7d but the "depends on" condition doesn't allow that. Instead of making the condition even longer just make it depend on "ARCH_MXC || COMPILE_TEST" instead. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Lucas Stach <l.stach@pengutronix.de>
2019-07-05PCI: hv: Fix a use-after-free bug in hv_eject_device_work()Dexuan Cui
Fix a use-after-free in hv_eject_device_work(). Fixes: 05f151a73ec2 ("PCI: hv: Fix a memory leak in hv_eject_device_work()") Signed-off-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Cc: stable@vger.kernel.org
2019-07-05PCI: tegra: Enable Relaxed Ordering only for Tegra20 & Tegra30Vidya Sagar
The PCI Tegra controller conversion to a device tree configurable driver in commit d1523b52bff3 ("PCI: tegra: Move PCIe driver to drivers/pci/host") implied that code for the driver can be compiled in for a kernel supporting multiple platforms. Unfortunately, a blind move of the code did not check that some of the quirks that were applied in arch/arm (eg enabling Relaxed Ordering on all PCI devices - since the quirk hook erroneously matches PCI_ANY_ID for both Vendor-ID and Device-ID) are now applied in all kernels that compile the PCI Tegra controlled driver, DT and ACPI alike. This is completely wrong, in that enablement of Relaxed Ordering is only required by default in Tegra20 platforms as described in the Tegra20 Technical Reference Manual (available at https://developer.nvidia.com/embedded/downloads#?search=tegra%202 in Section 34.1, where it is mentioned that Relaxed Ordering bit needs to be enabled in its root ports to avoid deadlock in hardware) and in the Tegra30 platforms for the same reasons (unfortunately not documented in the TRM). There is no other strict requirement on PCI devices Relaxed Ordering enablement on any other Tegra platforms or PCI host bridge driver. Fix this quite upsetting situation by limiting the vendor and device IDs to which the Relaxed Ordering quirk applies to the root ports in question, reported above. Signed-off-by: Vidya Sagar <vidyas@nvidia.com> [lorenzo.pieralisi@arm.com: completely rewrote the commit log/fixes tag] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Thierry Reding <treding@nvidia.com>
2019-07-05PCI: tegra: Change link retry log level to debugManikanta Maddireddy
Driver checks for link up three times before giving up, each retry attempt is printed as an error. Letting users know that PCIe link is down and in the process of being brought up again is for debug, not an error condition. Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Thierry Reding <treding@nvidia.com>
2019-07-05PCI: tegra: Add support for GPIO based PERST#Manikanta Maddireddy
Tegra PCIe has fixed per port SFIO line to signal PERST#, which can be controlled by AFI port register. However, if a platform routes a different GPIO to the PCIe slot, then port register cannot control it. Add support for GPIO based PERST# signal for such platforms. GPIO number comes from per port PCIe device tree node. PCIe driver probe doesn't fail if per port "reset-gpios" property is not populated, so platforms that require this workaround must make sure that the DT property is not missed in the corresponding device tree. Link: https://lore.kernel.org/linux-pci/20190705084850.30777-1-jonathanh@nvidia.com/ Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com> [lorenzo.pieralisi@arm.com: squashed in fix in Link] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Thierry Reding <treding@nvidia.com>
2019-06-27PCI: dwc: Export APIs to support .remove() implementationVidya Sagar
Export all configuration space access APIs and also other APIs to support host controller drivers of dwc core based implementations while adding support for .remove() hook to build their respective drivers as modules. Signed-off-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
2019-06-27PCI: dwc: Cleanup DBI,ATU read and write APIsVidya Sagar
Cleanup DBI read and write APIs by removing leading "__" (underscore) from their names as there is no reason to have leading underscores in the first place in the function definition. Remove dbi/dbi2 base address parameters as the same behaviour can be obtained through read and write APIs. Since dw_pcie_{readl/writel}_dbi() APIs can't be used for ATU read/write as ATU base address could be different from DBI base address, implement ATU read/write APIs using ATU base address without using dw_pcie_{readl/writel}_dbi() APIs. Signed-off-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Jingoo Han <jingoohan1@gmail.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-30 23:24:52 +0000