summaryrefslogtreecommitdiff
path: root/drivers/pci/controller/Kconfig
AgeCommit message (Collapse)Author
2020-09-17PCI: brcmstb: PCIE_BRCMSTB depends on ARCH_BRCMSTBJim Quinlan
Have PCIE_BRCMSTB depend on ARCH_BRCMSTB. Also set the default value to ARCH_BRCMSTB. Link: https://lore.kernel.org/r/20200911175232.19016-2-james.quinlan@broadcom.com Signed-off-by: Jim Quinlan <jquinlan@broadcom.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Florian Fainelli <f.fainelli@gmail.com>
2020-09-16PCI/MSI: Make arch_.*_msi_irq[s] fallbacks selectableThomas Gleixner
The arch_.*_msi_irq[s] fallbacks are compiled in whether an architecture requires them or not. Architectures which are fully utilizing hierarchical irq domains should never call into that code. It's not only architectures which depend on that by implementing one or more of the weak functions, there is also a bunch of drivers which relies on the weak functions which invoke msi_controller::setup_irq[s] and msi_controller::teardown_irq. Make the architectures and drivers which rely on them select them in Kconfig and if not selected replace them by stub functions which emit a warning and fail the PCI/MSI interrupt allocation. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20200826112333.992429909@linutronix.de
2020-09-16PCI: hip: Add handling of HiSilicon HIP PCIe controller errorsYicong Yang
The HiSilicon HIP PCIe controller is capable of handling errors on root port and performing port reset separately at each root port. Add error handling driver for HIP PCIe controller to log and report recoverable errors. Perform root port reset and restore link status after the recovery. Following are some of the PCIe controller's recoverable errors 1. completion transmission timeout error. 2. CRS retry counter over the threshold error. 3. ECC 2 bit errors 4. AXI bresponse/rresponse errors etc. The driver placed in the drivers/pci/controller/ because the HIP PCIe controller does not use DWC IP. Link: https://lore.kernel.org/r/20200903123456.1823-3-shiju.jose@huawei.com Signed-off-by: Yicong Yang <yangyicong@hisilicon.com> Signed-off-by: Shiju Jose <shiju.jose@huawei.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com>
2020-09-07PCI: aardvark: Implement driver 'remove' function and allow to build it as ↵Pali Rohár
module Providing driver's 'remove' function allows kernel to bind and unbind devices from aardvark driver. It also allows to build aardvark driver as a module. Compiling aardvark as a module simplifies development and debugging of this driver as it can be reloaded at runtime without the need to reboot to new kernel. Link: https://lore.kernel.org/r/20200907111038.5811-5-pali@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Marek Behún <marek.behun@nic.cz>
2020-08-05PCI: xilinx-cpm: Add Versal CPM Root Port driverBharat Kumar Gogada
Add support for Versal CPM as Root Port. The Versal ACAP devices include CCIX-PCIe Module (CPM). The integrated block for CPM along with the integrated bridge can function as PCIe Root Port. Bridge error and legacy interrupts in Versal CPM are handled using Versal CPM specific interrupt line. [bhelgaas: fold in kerneldoc fix from https://lore.kernel.org/linux-acpi/20200729201224.26799-7-krzk@kernel.org/] Link: https://lore.kernel.org/r/1592312214-9347-3-git-send-email-bharat.kumar.gogada@xilinx.com Signed-off-by: Bharat Kumar Gogada <bharat.kumar.gogada@xilinx.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rob Herring <robh@kernel.org>
2020-06-14treewide: replace '---help---' in Kconfig files with 'help'Masahiro Yamada
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-06Merge tag 'pci-v5.8-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Program MPS for RCiEP devices (Ashok Raj) - Fix pci_register_host_bridge() device_register() error handling (Rob Herring) - Fix pci_host_bridge struct device release/free handling (Rob Herring) Resource management: - Allow resizing BARs for devices on root bus (Ard Biesheuvel) Power management: - Reduce Thunderbolt resume time by working around devices that don't support DLL Link Active reporting (Mika Westerberg) - Work around a Pericom USB controller OHCI/EHCI PME# defect (Kai-Heng Feng) Virtualization: - Add ACS quirk for Intel Root Complex Integrated Endpoints (Ashok Raj) - Avoid FLR for AMD Starship USB 3.0 (Kevin Buettner) - Avoid FLR for AMD Matisse HD Audio & USB 3.0 (Marcos Scriven) Error handling: - Use only _OSC (not HEST FIRMWARE_FIRST) to determine AER ownership (Alexandru Gagniuc, Kuppuswamy Sathyanarayanan) - Reduce verbosity by logging only ACPI_NOTIFY_DISCONNECT_RECOVER events (Kuppuswamy Sathyanarayanan) - Don't enable AER by default in Kconfig (Bjorn Helgaas) Peer-to-peer DMA: - Add AMD Zen Raven and Renoir Root Ports to whitelist (Alex Deucher) ASPM: - Allow ASPM on links to PCIe-to-PCI/PCI-X Bridges (Kai-Heng Feng) Endpoint framework: - Fix DMA channel release in test (Kunihiko Hayashi) - Add page size as argument to pci_epc_mem_init() (Lad Prabhakar) - Add support to handle multiple base for mapping outbound memory (Lad Prabhakar) Generic host bridge driver: - Support building as module (Rob Herring) - Eliminate pci_host_common_probe wrappers (Rob Herring) Amlogic Meson PCIe controller driver: - Don't use FAST_LINK_MODE to set up link (Marc Zyngier) Broadcom STB PCIe controller driver: - Disable ASPM L0s if 'aspm-no-l0s' in DT (Jim Quinlan) - Fix clk_put() error (Jim Quinlan) - Fix window register offset (Jim Quinlan) - Assert fundamental reset on initialization (Nicolas Saenz Julienne) - Add notify xHCI reset property (Nicolas Saenz Julienne) - Add init routine for Raspberry Pi 4 VL805 USB controller (Nicolas Saenz Julienne) - Sync with Raspberry Pi 4 firmware for VL805 initialization (Nicolas Saenz Julienne) Cadence PCIe controller driver: - Remove "cdns,max-outbound-regions" DT property (replaced by "ranges") (Kishon Vijay Abraham I) - Read 32-bit (not 16-bit) Vendor ID/Device ID property from DT (Kishon Vijay Abraham I) Marvell Aardvark PCIe controller driver: - Improve link training (Marek Behún) - Add PHY support (Marek Behún) - Add "phys", "max-link-speed", "reset-gpios" to dt-binding (Marek Behún) - Train link immediately after enabling training to work around detection issues with some cards (Pali Rohár) - Issue PERST via GPIO to work around detection issues (Pali Rohár) - Don't blindly enable ASPM L0s (Pali Rohár) - Replace custom macros by standard linux/pci_regs.h macros (Pali Rohár) Microsoft Hyper-V host bridge driver: - Fix probe failure path to release resource (Wei Hu) - Retry PCI bus D0 entry on invalid device state for kdump (Wei Hu) Renesas R-Car PCIe controller driver: - Fix incorrect programming of OB windows (Andrew Murray) - Add suspend/resume (Kazufumi Ikeda) - Rename pcie-rcar.c to pcie-rcar-host.c (Lad Prabhakar) - Add endpoint controller driver (Lad Prabhakar) - Fix PCIEPAMR mask calculation (Lad Prabhakar) - Add r8a77961 to DT binding (Yoshihiro Shimoda) Socionext UniPhier Pro5 controller driver: - Add endpoint controller driver (Kunihiko Hayashi) Synopsys DesignWare PCIe controller driver: - Program outbound ATU upper limit register (Alan Mikhak) - Fix inner MSI IRQ domain registration (Marc Zyngier) Miscellaneous: - Check for platform_get_irq() failure consistently (negative return means failure) (Aman Sharma) - Fix several runtime PM get/put imbalances (Dinghao Liu) - Use flexible-array and struct_size() helpers for code cleanup (Gustavo A. R. Silva) - Update & fix issues in bridge emulation of PCIe registers (Jon Derrick) - Add macros for bridge window names (PCI_BRIDGE_IO_WINDOW, etc) (Krzysztof Wilczyński) - Work around Intel PCH MROMs that have invalid BARs (Xiaochun Lee)" * tag 'pci-v5.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (100 commits) PCI: uniphier: Add Socionext UniPhier Pro5 PCIe endpoint controller driver PCI: Add ACS quirk for Intel Root Complex Integrated Endpoints PCI/DPC: Print IRQ number used by port PCI/AER: Use "aer" variable for capability offset PCI/AER: Remove redundant dev->aer_cap checks PCI/AER: Remove redundant pci_is_pcie() checks PCI/AER: Remove HEST/FIRMWARE_FIRST parsing for AER ownership PCI: tegra: Fix runtime PM imbalance on error PCI: vmd: Filter resource type bits from shadow register PCI: tegra194: Fix runtime PM imbalance on error dt-bindings: PCI: Add UniPhier PCIe endpoint controller description PCI: hv: Use struct_size() helper PCI: Rename _DSM constants to align with spec PCI: Avoid FLR for AMD Starship USB 3.0 PCI: Avoid FLR for AMD Matisse HD Audio & USB 3.0 x86/PCI: Drop unused xen_register_pirq() gsi_override parameter PCI: dwc: Use private data pointer of "struct irq_domain" to get pcie_port PCI: amlogic: meson: Don't use FAST_LINK_MODE to set up link PCI: dwc: Fix inner MSI IRQ domain registration PCI: dwc: pci-dra7xx: Use devm_platform_ioremap_resource_byname() ...
2020-06-04Merge branch 'remotes/lorenzo/pci/rcar'Bjorn Helgaas
- Fix rcar OB window programming (Andrew Murray) - Add rcar suspend/resume support (Kazufumi Ikeda) - Add r8a77961 to DT binding (Yoshihiro Shimoda) - Rename pcie-rcar.c to pcie-rcar-host.c to make room for endpoint mode (Lad Prabhakar) - Move shareable code to pcie-rcar.c (Lad Prabhakar) - Correct PCIEPAMR mask calculation for "size < 128" (Lad Prabhakar) - Add endpoint support for multiple outbound memory windows (Lad Prabhakar) - Add R-Car PCIe endpoint driver and DT bindings (Lad Prabhakar) * remotes/lorenzo/pci/rcar: MAINTAINERS: Add file patterns for rcar PCI device tree bindings PCI: rcar: Add endpoint mode support dt-bindings: PCI: rcar: Add bindings for R-Car PCIe endpoint controller PCI: endpoint: Add support to handle multiple base for mapping outbound memory PCI: endpoint: Pass page size as argument to pci_epc_mem_init() PCI: rcar: Fix calculating mask for PCIEPAMR register PCI: rcar: Move shareable code to a common file PCI: rcar: Rename pcie-rcar.c to pcie-rcar-host.c dt-bindings: pci: rcar: add r8a77961 support PCI: rcar: Add suspend/resume PCI: rcar: Fix incorrect programming of OB windows
2020-05-27PCI: Add Loongson PCI Controller supportJiaxun Yang
This controller can be found on Loongson-2K SoC, Loongson-3 systems with RS780E/LS7A PCH. The RS780E part of code was previously located at arch/mips/pci/ops-loongson3.c and now it can use generic PCI driver implementation. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-05-22PCI: rcar: Add endpoint mode supportLad Prabhakar
Add support for R-Car PCIe controller to work in endpoint mode. Link: https://lore.kernel.org/r/1588854799-13710-8-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
2020-05-11PCI: rcar: Rename pcie-rcar.c to pcie-rcar-host.cLad Prabhakar
This commit renames pcie-rcar.c to pcie-rcar-host.c in preparation for adding support for endpoint mode. CONFIG_PCIE_RCAR is kept so that arm64 defconfig change can be a separate patch. With this patch both config options PCIE_RCAR and PCIE_RCAR_HOST will be available but PCIE_RCAR internally selects PCIE_RCAR_HOST so that bisect builds wont be affected. Link: https://lore.kernel.org/r/1588854799-13710-2-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
2020-05-01PCI: host-generic: Support building as modulesRob Herring
Enable building host-generic and its host-common dependency as a module. Link: https://lore.kernel.org/r/20200409234923.21598-3-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Will Deacon <will@kernel.org> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Andrew Murray <amurray@thegoodpenguin.co.uk> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Will Deacon <will@kernel.org> Cc: linux-pci@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org
2020-02-21PCI: mobiveil: Modularize the Mobiveil PCIe Host Bridge IP driverHou Zhiqiang
Modularize the Mobiveil PCIe host driver according to the abstraction of Root Complex and Endpoint and move it into a new directory in order to make it easier to reuse the driver functions to add new host drivers for systems integrating the Mobiveil PCIe GPEX IP. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> [lorenzo.pieralisi@arm.com: updated commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com>
2020-01-29Merge branch 'remotes/lorenzo/pci/brcmstb'Bjorn Helgaas
- Add brcmstb PCIe bindings for Raspberry Pi 4 (Jim Quinlan) - Add Broadcom STB PCIe host controller driver (Jim Quinlan) - Add MSI support for Broadcom STB PCIe host controller driver (Jim Quinlan) * remotes/lorenzo/pci/brcmstb: PCI: brcmstb: Add MSI support PCI: brcmstb: Add Broadcom STB PCIe host controller driver dt-bindings: PCI: Add bindings for brcmstb's PCIe device
2020-01-28PCI: brcmstb: Add MSI supportJim Quinlan
This adds MSI support to the Broadcom STB PCIe host controller. The MSI controller is physically located within the PCIe block, however, there is no reason why the MSI controller could not be moved elsewhere in the future. MSIX is not supported by the HW. Since the internal Brcmstb MSI controller is intertwined with the PCIe controller, it is not its own platform device but rather part of the PCIe platform device. Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com> Co-developed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Andrew Murray <andrew.murray@arm.com>
2020-01-28PCI: brcmstb: Add Broadcom STB PCIe host controller driverJim Quinlan
This adds a basic driver for Broadcom's STB PCIe controller, for now aimed at Raspberry Pi 4's SoC, bcm2711. Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com> Co-developed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> [lorenzo.pieralisi@arm.com: updated brcm_pcie_get_rc_bar2_size_and_offset()according to https://lore.kernel.org/linux-pci/be8ddb33a7360af1815cf686f77f3f0913d02be3.camel@suse.de] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com> Reviewed-by: Jeremy Linton <jeremy.linton@arm.com>
2020-01-24PCI: vmd: Remove dma_map_ops overridesJon Derrick
Devices on the VMD domain use the VMD endpoint's requester ID and have been relying on the VMD endpoint's DMA operations. The problem with this was that VMD domain devices would use the VMD endpoint's attributes when doing DMA and IOMMU mapping. We can be smarter about this by only using the VMD endpoint when mapping and providing the correct child device's attributes during DMA operations. Remove the dma_map_ops redirect. Link: https://lore.kernel.org/r/1579613871-301529-7-git-send-email-jonathan.derrick@intel.com Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2019-11-28Merge branch 'remotes/lorenzo/pci/mmio-dma-ranges'Bjorn Helgaas
- Consolidate DT "dma-ranges" parsing and convert all host drivers to use shared parsing (Rob Herring) * remotes/lorenzo/pci/mmio-dma-ranges: PCI: Make devm_of_pci_get_host_bridge_resources() static PCI: rcar: Use inbound resources for setup PCI: iproc: Use inbound resources for setup PCI: xgene: Use inbound resources for setup PCI: v3-semi: Use inbound resources for setup PCI: ftpci100: Use inbound resources for setup PCI: of: Add inbound resource parsing to helpers PCI: versatile: Enable COMPILE_TEST PCI: versatile: Remove usage of PHYS_OFFSET PCI: versatile: Use pci_parse_request_of_pci_ranges() PCI: xilinx-nwl: Use pci_parse_request_of_pci_ranges() PCI: xilinx: Use pci_parse_request_of_pci_ranges() PCI: xgene: Use pci_parse_request_of_pci_ranges() PCI: v3-semi: Use pci_parse_request_of_pci_ranges() PCI: rockchip: Drop storing driver private outbound resource data PCI: rockchip: Use pci_parse_request_of_pci_ranges() PCI: mobiveil: Use pci_parse_request_of_pci_ranges() PCI: mediatek: Use pci_parse_request_of_pci_ranges() PCI: iproc: Use pci_parse_request_of_pci_ranges() PCI: faraday: Use pci_parse_request_of_pci_ranges() PCI: dwc: Use pci_parse_request_of_pci_ranges() PCI: altera: Use pci_parse_request_of_pci_ranges() PCI: aardvark: Use pci_parse_request_of_pci_ranges() PCI: Export pci_parse_request_of_pci_ranges() resource: Add a resource_list_first_type helper # Conflicts: # drivers/pci/controller/pcie-rcar.c
2019-11-11PCI: cadence: Move all files to per-device cadence directoryTom Joseph
Cadence core library files may be used by various platform drivers. Add a new directory "cadence" to group all the Cadence core library files and the platforms using Cadence core library. Signed-off-by: Tom Joseph <tjoseph@cadence.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com>
2019-11-11PCI: cadence: Refactor driver to use as a core libraryTom Joseph
Cadence PCIe host and endpoint IP may be embedded into a variety of SoCs/platforms. Let's extract the platform related APIs/Structures in the current driver to a separate file (pcie-cadence-plat.c), such that the common functionality can be used by future platforms. Signed-off-by: Tom Joseph <tjoseph@cadence.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com>
2019-10-29PCI: versatile: Enable COMPILE_TESTRob Herring
Since commit a574795bc383 ("PCI: generic,versatile: Remove unused pci_sys_data structures") the build dependency on ARM is gone, so let's enable COMPILE_TEST for versatile. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Bjorn Helgaas <bhelgaas@google.com>
2019-08-22PCI: hv: Add a Hyper-V PCI interface driver for software backchannel interfaceHaiyang Zhang
This interface driver is a helper driver allows other drivers to have a common interface with the Hyper-V PCI frontend driver. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-30PCI: altera-msi: Allow building as moduleLey Foon Tan
Altera MSI IP is a soft IP and is only available after an FPGA image (with design containing it) is programmed. Make driver modulable to support use case FPGA image is programmed the after kernel has booted, so that the driver can be loaded upon request. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2019-05-30PCI: altera: Allow building as moduleLey Foon Tan
Altera PCIe Rootport IP is a soft IP and is only available after an FPGA image (whose design contains it) is programmed. Make driver modulable to support use cases when FPGA image is programmed after the kernel has booted, so that the driver can be loaded upon request. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2019-04-24x86/pci: Clean up usage of X86_DEV_DMA_OPSChristoph Hellwig
We have supported per-device dma_map_ops in generic code for a long time, and this symbol just guards the inclusion of the dma_map_ops registry used for vmd. Stop enabling it for anything but vmd. No change in functionality intended. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20190410080220.21705-3-hch@lst.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-03-04PCI: altera: Enable driver on ARM64Ley Foon Tan
Enable PCIE_ALTERA on ARM64 platform. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2018-10-20Merge branch 'remotes/lorenzo/pci/mediatek'Bjorn Helgaas
- Fix Mediatek unchecked return value from devm_pci_remap_iospace() (Gustavo A. R. Silva) - Fix Mediatek endpoint/port matching logic (Honghui Zhang) - Change Mediatek Root Port Class Code to PCI_CLASS_BRIDGE_PCI (Honghui Zhang) - Remove redundant Mediatek PM domain check (Honghui Zhang) - Convert Mediatek to pci_host_probe() (Honghui Zhang) - Fix Mediatek MSI enablement (Honghui Zhang) - Add Mediatek system PM support for MT2712 and MT7622 (Honghui Zhang) - Add Mediatek loadable module support (Honghui Zhang) * remotes/lorenzo/pci/mediatek: PCI: mediatek: Add loadable kernel module support PCI: mediatek: Add system PM support for MT2712 and MT7622 PCI: mediatek: Fixup MSI enablement logic by enabling MSI before clocks PCI: mediatek: Convert to use pci_host_probe() PCI: mediatek: Remove the redundant dev->pm_domain check PCI: mediatek: Fix class type for MT7622 to PCI_CLASS_BRIDGE_PCI PCI: mediatek: Fix mtk_pcie_find_port() endpoint/port matching logic PCI: mediatek: Fix unchecked return value
2018-10-18PCI: aardvark: Implement emulated root PCI bridge config spaceZachary Zhang
The PCI controller in the Marvell Armada 3720 does not implement a software-accessible root port PCI bridge configuration space. This causes a number of problems when using PCIe switches or when the Max Payload size needs to be aligned between the root complex and the endpoint. Implementing an emulated root PCI bridge, like is already done in the pci-mvebu driver for older Marvell platforms allows to solve those issues, and also to support features such as ASR, PME, VC, HP. Signed-off-by: Zachary Zhang <zhangzg@marvell.com> [Thomas: convert to the common emulated PCI bridge logic.] Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2018-10-18PCI: mvebu: Convert to PCI emulated bridge config spaceThomas Petazzoni
Convert the pci-mvebu driver to use the pci-bridge-emul logic, that helps emulating a root port PCI bridge configuration space. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> [lorenzo.pieralisi@arm.com: updated commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2018-10-17PCI: mediatek: Add loadable kernel module supportHonghui Zhang
Implement remove() callback function for the Mediatek PCIe controller driver to add loadable kernel module support. Save the PCIe's GIC IRQ at probe so that it can be retrieved to call dispose_irq() to tear down the IRQ upon module removal. Signed-off-by: Honghui Zhang <honghui.zhang@mediatek.com> [lorenzo.pieralisi@arm.com: updated commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
2018-08-15Merge branch 'remotes/lorenzo/pci/mobiveil'Bjorn Helgaas
- Fix mobiveil iomem/phys_addr_t type usage (Lorenzo Pieralisi) - Fix mobiveil missing include file (Lorenzo Pieralisi) - Add mobiveil Kconfig/Makefile support (Lorenzo Pieralisi) * remotes/lorenzo/pci/mobiveil: PCI: mobiveil: Add Kconfig/Makefile entries PCI: mobiveil: Add missing ../pci.h include PCI: mobiveil: Fix struct mobiveil_pcie.pcie_reg_base address type PCI: mobiveil: Integer overflow in IB_WIN_SIZE
2018-08-15Merge branch 'remotes/lorenzo/pci/controller/misc'Bjorn Helgaas
- Remove Xilinx AXI-PCIe host bridge arch dependency (Palmer Dabbelt) * remotes/lorenzo/pci/controller/misc: PCI/xilinx: Depend on OF instead of the ARCH
2018-08-06PCI/xilinx: Depend on OF instead of the ARCHChristoph Hellwig
There isn't a hard dependency of the Xilinx AXI-PCIe host bridge on any architecture. For example: at SiFive we map RISC-V cores to Xilinx FPGAs and connect the Xilinx IP via a TileLink adapter, so the RISC-V Linux port will need to be able to enable PCIE_XILINX in order to have PCIe support. This patch decouples the PCIE_XILINX support from ARCH. Instead it just depends on OF, which is the only true dependency. Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com> [hch: switch to OF instead of OF_PCI now that the latter is gone] Signed-off-by: Christoph Hellwig <hch@lst.de> [lorenzo.pieralisi@arm.com: trimmed the commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2018-07-30PCI: mobiveil: Add Kconfig/Makefile entriesLorenzo Pieralisi
commit 9af6bcb11e12 ("PCI: mobiveil: Add Mobiveil PCIe Host Bridge IP driver") did not add the configuration and build infrastructure to configure and build the mobiveil controller driver, so at present the driver code is in the kernel but cannot be compiled. Add the mobiveil controller driver Kconfig/Makefile infrastructure. Fixes: 9af6bcb11e12 ("PCI: mobiveil: Add Mobiveil PCIe Host Bridge IP driver") Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Subrahmanya Lingappa <l.subrahmanya@mobiveil.co.in>
2018-06-26PCI: controller: Move PCI_DOMAINS selection to arch KconfigLorenzo Pieralisi
Commit 51bc085d6454 ("PCI: Improve host drivers compile test coverage") added configuration options to allow PCI host controller drivers to be compile tested on all architectures. Some host controller drivers (eg PCIE_ALTERA) config entries select the PCI_DOMAINS config option to enable PCI domains management in the kernel. Now that host controller drivers can be compiled on all architectures, this triggers build regressions on arches that do not implement the PCI_DOMAINS required API (ie pci_domain_nr()): drivers/ata/pata_ali.c: In function 'ali_init_chipset': drivers/ata/pata_ali.c:469:38: error: implicit declaration of function 'pci_domain_nr'; did you mean 'pci_iomap_wc'? Furthemore, some software configurations (ie Jailhouse) require a PCI_DOMAINS enabled kernel to configure multiple host controllers without having an explicit dependency on the ARM platform on which they run. Make PCI_DOMAINS a visible configuration option on ARM so that software configurations that need it can manually select it and move the PCI_DOMAINS selection from PCI controllers configuration file to ARM sub-arch config entries that currently require it, fixing the issue. Fixes: 51bc085d6454 ("PCI: Improve host drivers compile test coverage") Link: https://lkml.kernel.org/r/20180612170229.GA10141@roeck-us.net Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <helgaas@kernel.org> Acked-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Ley Foon Tan <ley.foon.tan@intel.com> Acked-by: Rob Herring <robh@kernel.org> Cc: Scott Branden <scott.branden@broadcom.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Guenter Roeck <linux@roeck-us.net>
2018-06-08PCI: Collect all native drivers under drivers/pci/controller/Shawn Lin
Native PCI drivers for root complex devices were originally all in drivers/pci/host/. Some of these devices can also be operated in endpoint mode. Drivers for endpoint mode didn't seem to fit in the "host" directory, so we put both the root complex and endpoint drivers in per-device directories, e.g., drivers/pci/dwc/, drivers/pci/cadence/, etc. These per-device directories contain trivial Kconfig and Makefiles and clutter drivers/pci/. Make a new drivers/pci/controllers/ directory and collect all the device-specific drivers there. No functional change intended. Link: https://lkml.kernel.org/r/1520304202-232891-1-git-send-email-shawn.lin@rock-chips.com Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> [bhelgaas: changelog] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-01 18:12:00 +0000