Age | Commit message (Collapse) | Author |
|
Pull block fixes from Jens Axboe:
"A bit bigger than I'd like at this point, but mostly a bunch of little
fixes. In detail:
- NVMe pull request via Christoph:
- Fix a missing queue put in nvmet_fc_ls_create_association
(Amit Engel)
- Clear queue pointers on tag_set initialization failure
(Maurizio Lombardi)
- Use workqueue dedicated to authentication (Shin'ichiro
Kawasaki)
- Fix for an overflow in ublk (Liu)
- Fix for leaking a queue reference in block cgroups (Ming)
- Fix for a use-after-free in BFQ (Yu)"
* tag 'block-6.2-2023-02-03' of git://git.kernel.dk/linux:
blk-cgroup: don't update io stat for root cgroup
nvme-auth: use workqueue dedicated to authentication
nvme: clear the request_queue pointers on failure in nvme_alloc_io_tag_set
nvme: clear the request_queue pointers on failure in nvme_alloc_admin_tag_set
nvme-fc: fix a missing queue put in nvmet_fc_ls_create_association
block: Fix the blk_mq_destroy_queue() documentation
block: ublk: extending queue_size to fix overflow
block, bfq: fix uaf for bfqq in bic_set_bfqq()
|
|
Use the bvec_set_virt helper to initialize the special_vec.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20230203150634.3199647-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Use the bvec_set_page helper to initialize bvecs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20230203150634.3199647-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
net/core/gro.c
7d2c89b32587 ("skb: Do mix page pool and page referenced frags in GRO")
b1a78b9b9886 ("net: add support for ipv4 big tcp")
https://lore.kernel.org/all/20230203094454.5766f160@canb.auug.org.au/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
NVMe In-Band authentication uses two kinds of works: chap->auth_work and
ctrl->dhchap_auth_work. The latter work flushes or cancels the former
work. However, the both works are queued to the same workqueue nvme-wq.
It results in the lockdep WARNING as follows:
WARNING: possible recursive locking detected
6.2.0-rc4+ #1 Not tainted
--------------------------------------------
kworker/u16:7/69 is trying to acquire lock:
ffff902d52e65548 ((wq_completion)nvme-wq){+.+.}-{0:0}, at: start_flush_work+0x2c5/0x380
but task is already holding lock:
ffff902d52e65548 ((wq_completion)nvme-wq){+.+.}-{0:0}, at: process_one_work+0x210/0x410
To avoid the WARNING, introduce a new workqueue nvme-auth-wq dedicated
to chap->auth_work.
Reported-by: Daniel Wagner <dwagner@suse.de>
Link: https://lore.kernel.org/linux-nvme/20230130110802.paafkiipmitwtnwr@carbon.lan/
Fixes: f50fff73d620 ("nvme: implement In-Band authentication")
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Tested-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
The nvme driver will freeze the IO queues in response to an admin
command with CSE bits set. These bits notify the host that the command
that's about to be executed needs to be done exclusively, hence the
freeze.
The Security Receive command is often reported by multiple vendors with
CSE bits set. The reason for this is that the result depends on the
previous Security Send. This has nothing to do with IO queues, though,
so the driver is taking an overly cautious response to seeing this
passthrough command, while unable to fufill the intended admin queue
action.
Rather than freeze IO during this harmless command, mask off the
effects. This freezing is observed to cause IO latency spikes when host
software periodically validates the security state of the drives.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Instead of appending command effects flags per IO, set the known effects
flags the driver needs to react to just once during initial setup.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
This is due to the fact that the host is allowed to pass the controller
an sgl describing a buffer that is larger than the payload itself
Signed-off-by: Amit Engel <Amit.Engel@dell.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
This provides additional details about the rq/cmd that is timed out
example log if CONFIG_NVME_VERBOSE_ERRORS is configured:
"nvme nvme0: queue 2 timeout cid 0xd058 type 4 opc Write (0x1)"
example log if CONFIG_NVME_VERBOSE_ERRORS is not configured:
"nvme nvme0: queue 2 timeout cid 0xd058 type 4 opc I/O Cmd (0x1)"
Signed-off-by: Amit Engel <Amit.Engel@dell.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
nvme_opcode_str will handle io/admin/fabrics ops
This improves NVMe errors logging
Signed-off-by: Amit Engel <Amit.Engel@dell.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
After moving the nvme_passthru_end call to the callers of
nvme_execute_passthru_rq, this function has become quite pointless,
so remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
|
|
The 'struct nvme_iod' space is appended at the end of the preallocated
'struct request', and padded to the cache line size. This leaves some
free memory (in most kernel configs) up for grabs.
Instead of appending the nvme data descriptor addresses after the
scatterlist, inline these for free within struct nvme_iod. There is now
enough space in the mempool for 128 possibe segments.
And without increasing the size of the preallocated requests, we can
hold up to 5 PRP descriptor elements, allowing the driver to increase
its max transfer size to 8MB.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
The driver uses the dma entries for setting up its command's SGL/PRP
lists. The dma mapping might have fewer entries than the physical
segments, so check the dma mapped count to determine which nvme data
layout method is more optimal.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
The max segments this driver can see is 127, well below the 256
threshold needed to add an nvme sgl segment descriptor. Remove all the
useless checks and dead code.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
NVMe status codes are part of the wire protocol, and shouldn't be
fabricated in the stack. So with this patch the authentication code
is switched over to use error codes; as a side effect authentication
failures due to internal error won't be retried anymore.
But that shouldn't have happened anyway.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
The NVMe 2.0 spec defines the ATR and ASCR bits in the AUTHREQ
connect response field to be mutually exclusive. So to clarify the
handling here switch the AUTHREQ handling to use the bit definitions
and check for both bits.
And while we're at it, add a message to the user that secure
concatenation is not supported (yet).
Suggested-by: Mark Lehrer <mark.lehrer@wdc.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
In nvme_alloc_io_tag_set(), the connect_q pointer should be set to NULL
in case of error to avoid potential invalid pointer dereferences.
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
If nvme_alloc_admin_tag_set() fails, the admin_q and fabrics_q pointers
are left with an invalid, non-NULL value. Other functions may then check
the pointers and dereference them, e.g. in
nvme_probe() -> out_disable: -> nvme_dev_remove_admin().
Fix the bug by setting admin_q and fabrics_q to NULL in case of error.
Also use the set variable to free the tag_set as ctrl->admin_tagset isn't
initialized yet.
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
As part of nvmet_fc_ls_create_association there is a case where
nvmet_fc_alloc_target_queue fails right after a new association with an
admin queue is created. In this case, no one releases the get taken in
nvmet_fc_alloc_target_assoc. This fix is adding the missing put.
Signed-off-by: Amit Engel <Amit.Engel@dell.com>
Reviewed-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Add a generic bdev_zone_no() helper to calculate zone number for a
given sector in a block device. This helper internally uses disk_zone_no()
to find the zone number.
Use the helper bdev_zone_no() to calculate nr of zones. This lets us
make modifications to the math if needed in one place.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Pankaj Raghav <p.raghav@samsung.com>
Link: https://lore.kernel.org/r/20230110143635.77300-4-p.raghav@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This patch sets REQ_ALLOC_CACHE flag for uring-passthru requests.
This is a prep-patch so that normal / IRQ-driven uring-passthru
I/Os can also leverage bio-cache.
Signed-off-by: Anuj Gupta <anuj20.g@samsung.com>
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Link: https://lore.kernel.org/r/20230117120638.72254-2-anuj20.g@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Conflicts:
drivers/net/ethernet/intel/ice/ice_main.c
418e53401e47 ("ice: move devlink port creation/deletion")
643ef23bd9dd ("ice: Introduce local var for readability")
https://lore.kernel.org/all/20230127124025.0dacef40@canb.auug.org.au/
https://lore.kernel.org/all/20230124005714.3996270-1-anthony.l.nguyen@intel.com/
drivers/net/ethernet/engleder/tsnep_main.c
3d53aaef4332 ("tsnep: Fix TX queue stop/wake for multiple queues")
25faa6a4c5ca ("tsnep: Replace TX spin_lock with __netif_tx_lock")
https://lore.kernel.org/all/20230127123604.36bb3e99@canb.auug.org.au/
net/netfilter/nf_conntrack_proto_sctp.c
13bd9b31a969 ("Revert "netfilter: conntrack: add sctp DATA_SENT state"")
a44b7651489f ("netfilter: conntrack: unify established states for SCTP paths")
f71cb8f45d09 ("netfilter: conntrack: sctp: use nf log infrastructure for invalid packets")
https://lore.kernel.org/all/20230127125052.674281f9@canb.auug.org.au/
https://lore.kernel.org/all/d36076f3-6add-a442-6d4b-ead9f7ffff86@tessares.net/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull block fixes from Jens Axboe:
"Minor tweaks for this release:
- NVMe pull request via Christoph:
- Flush initial scan_work for async probe (Keith Busch)
- Fix passthrough csi check (Keith Busch)
- Fix nvme-fc initialization order (Ross Lagerwall)
- Fix for tearing down non-started device in ublk (Ming)"
* tag 'block-6.2-2023-01-27' of git://git.kernel.dk/linux:
block: ublk: move ublk_chr_class destroying after devices are removed
nvme: fix passthrough csi check
nvme-pci: flush initial scan_work for async probe
nvme-fc: fix initialization order
|
|
The namespace head saves the Command Set Indicator enum, so use that
instead of the Command Set Selected. The two values are not the same.
Fixes: 831ed60c2aca2d ("nvme: also return I/O command effects from nvme_command_effects")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
The nvme device may have a namespace with the root partition, so make
sure we've completed scanning before returning from the async probe.
Fixes: eac3ef262941 ("nvme-pci: split the initial probe from the rest path")
Reported-by: Klaus Jensen <its@irrelevant.dk>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
ctrl->ops is used by nvme_alloc_admin_tag_set() but set by
nvme_init_ctrl() so reorder the calls to avoid a NULL pointer
dereference.
Fixes: 6dfba1c09c10 ("nvme-fc: use the tagset alloc/free helpers")
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
As suggested by Cong, introduce a tracepoint for all ->sk_data_ready()
callback implementations. For example:
<...>
iperf-609 [002] ..... 70.660425: sk_data_ready: family=2 protocol=6 func=sock_def_readable
iperf-609 [002] ..... 70.660436: sk_data_ready: family=2 protocol=6 func=sock_def_readable
<...>
Suggested-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull block fixes from Jens Axboe:
"Various little tweaks all over the place:
- NVMe pull request via Christoph:
- fix controller shutdown regression in nvme-apple (Janne Grunau)
- fix a polling on timeout regression in nvme-pci (Keith Busch)
- Fix a bug in the read request side request allocation caching
(Pavel)
- pktcdvd was brought back after we configured a NULL return on bio
splits, make it consistent with the others (me)
- BFQ refcount fix (Yu)
- Block cgroup policy activation fix (Yu)
- Fix for an md regression introduced in the 6.2 cycle (Adrian)"
* tag 'block-6.2-2023-01-20' of git://git.kernel.dk/linux:
nvme-pci: fix timeout request state check
nvme-apple: only reset the controller when RTKit is running
nvme-apple: reset controller during shutdown
block: fix hctx checks for batch allocation
block/rnbd-clt: fix wrong max ID in ida_alloc_max
blk-cgroup: fix missing pd_online_fn() while activating policy
pktcdvd: check for NULL returna fter calling bio_split_to_limits()
block, bfq: switch 'bfqg->ref' to use atomic refcount apis
md: fix incorrect declaration about claim_rdev in md_import_device
|
|
Polling the completion can progress the request state to IDLE, either
inline with the completion, or through softirq. Either way, the state
may not be COMPLETED, so don't check for that. We only care if the state
isn't IN_FLIGHT.
This is fixing an issue where the driver aborts an IO that we just
completed. Seeing the "aborting" message instead of "polled" is very
misleading as to where the timeout problem resides.
Fixes: bf392a5dc02a9b ("nvme-pci: Remove tag from process cq")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
NVMe controller register access hangs indefinitely when the co-processor
is not running. A missed reset is preferable over a hanging thread since
it could be recoverable.
Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
This is a functional revert of c76b8308e4c9 ("nvme-apple: fix controller
shutdown in apple_nvme_disable").
The commit broke suspend/resume since apple_nvme_reset_work() tries to
disable the controller on resume. This does not work for the apple NVMe
controller since register access only works while the co-processor
firmware is running.
Disabling the NVMe controller in the shutdown path is also required
for shutting the co-processor down. The original code was appropriate
for this hardware. Add a comment to prevent a similar breaking changes
in the future.
Fixes: c76b8308e4c9 ("nvme-apple: fix controller shutdown in apple_nvme_disable")
Reported-by: Janne Grunau <j@jannau.net>
Link: https://lore.kernel.org/all/20230110174745.GA3576@jannau.net/
Signed-off-by: Janne Grunau <j@jannau.net>
[hch: updated with a more descriptive comment from Hector Martin]
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Pull block fixes from Jens Axboe:
"Nothing major in here, just a collection of NVMe fixes and dropping a
wrong might_sleep() that static checkers tripped over but which isn't
valid"
* tag 'block-6.2-2023-01-13' of git://git.kernel.dk/linux:
MAINTAINERS: stop nvme matching for nvmem files
nvme: don't allow unprivileged passthrough on partitions
nvme: replace the "bool vec" arguments with flags in the ioctl path
nvme: remove __nvme_ioctl
nvme-pci: fix error handling in nvme_pci_enable()
nvme-pci: add NVME_QUIRK_IDENTIFY_CNS quirk to Apple T2 controllers
nvme-apple: add NVME_QUIRK_IDENTIFY_CNS quirk to fix regression
block: Drop spurious might_sleep() from blk_put_queue()
|
|
Passthrough commands can always access the entire device, and thus
submitting them on partitions is an privelege escalation.
In hindsight we should have never allowed any passthrough commands on
partitions, but it's probably too late to change that decision now.
Fixes: e4fbcf32c860 ("nvme: identify-namespace without CAP_SYS_ADMIN")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
|
|
To prepare for passing down more information, replace the boolean
vec argument with a more extensible flags one.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
|
|
Open code __nvme_ioctl in the two callers to make future changes that
pass down additional paramters in the ioctl path easier.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
|
|
There are two issues in nvme_pci_enable():
1) If pci_alloc_irq_vectors() fails, device is left enabled. Fix this by
adding a goto disable statement.
2) nvme_pci_configure_admin_queue could return -ENODEV, in this case,
we will need to free IRQ properly. Otherwise the following warning
could be triggered:
[ 5.286752] WARNING: CPU: 0 PID: 33 at kernel/irq/irqdomain.c:253 irq_domain_remove+0x12d/0x140
[ 5.290547] Call Trace:
[ 5.290626] <TASK>
[ 5.290695] msi_remove_device_irq_domain+0xc9/0xf0
[ 5.290843] msi_device_data_release+0x15/0x80
[ 5.290978] release_nodes+0x58/0x90
[ 5.293788] WARNING: CPU: 0 PID: 33 at kernel/irq/msi.c:276 msi_device_data_release+0x76/0x80
[ 5.297573] Call Trace:
[ 5.297651] <TASK>
[ 5.297719] release_nodes+0x58/0x90
[ 5.297831] devres_release_all+0xef/0x140
[ 5.298339] device_unbind_cleanup+0x11/0xc0
[ 5.298479] really_probe+0x296/0x320
Fixes: a6ee7f19ebfd ("nvme-pci: call nvme_pci_configure_admin_queue from nvme_pci_enable")
Co-developed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
This mirrors the quirk added to Apple Silicon controllers in apple.c.
These controllers do not support the Active NS ID List command and
behave identically to the SoC version judging by existing user
reports/syslogs, so will need the same fix. This quirk reverts
back to NVMe 1.0 behavior and disables the broken commands.
Fixes: 811f4de0344d ("nvme: avoid fallback to sequential scan due to transient issues")
Signed-off-by: Hector Martin <marcan@marcan.st>
Tested-by: Orlando Chamberlain <orlandoch.dev@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
From the get-go, this driver and the ANS syslog have been complaining
about namespace identification. In 6.2-rc1, commit 811f4de0344d ("nvme:
avoid fallback to sequential scan due to transient issues") regressed
the driver by no longer allowing fallback to sequential namespace scans,
leaving us with no namespaces.
It turns out that the real problem is that this controller claiming
NVMe 1.1 compat is treating the CNS field as a binary field, as in NVMe
1.0. This already has a quirk, NVME_QUIRK_IDENTIFY_CNS, so set it for
the controller to fix all this nonsense (including other errors
triggered by other CNS commands).
Fixes: 811f4de0344d ("nvme: avoid fallback to sequential scan due to transient issues")
Fixes: 5bd2927aceba ("nvme-apple: Add initial Apple SoC NVMe driver")
Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Pull block fixes from Jens Axboe:
"The big change here is obviously the revert of the pktcdvd driver
removal. Outside of that, just minor tweaks. In detail:
- Re-instate the pktcdvd driver, which necessitates adding back
bio_copy_data_iter() and the fops->devnode() hook for now (me)
- Fix for splitting of a bio marked as NOWAIT, causing either nowait
reads or writes to error with EAGAIN even if parts of the IO
completed (me)
- Fix for ublk, punting management commands to io-wq as they can all
easily block for extended periods of time (Ming)
- Removal of SRCU dependency for the block layer (Paul)"
* tag 'block-2023-01-06' of git://git.kernel.dk/linux:
block: Remove "select SRCU"
Revert "pktcdvd: remove driver."
Revert "block: remove devnode callback from struct block_device_operations"
Revert "block: bio_copy_data_iter"
ublk: honor IO_URING_F_NONBLOCK for handling control command
block: don't allow splitting of a REQ_NOWAIT bio
block: handle bio_split_to_limits() NULL return
|
|
This can't happen right now, but in preparation for allowing
bio_split_to_limits() returning NULL if it ended the bio, check for it
in all the callers.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull block fixes from Jens Axboe:
"Mostly just NVMe, but also a single fixup for BFQ for a regression
that happened during the merge window. In detail:
- NVMe pull requests via Christoph:
- Fix doorbell buffer value endianness (Klaus Jensen)
- Fix Linux vs NVMe page size mismatch (Keith Busch)
- Fix a potential use memory access beyong the allocation limit
(Keith Busch)
- Fix a multipath vs blktrace NULL pointer dereference (Yanjun
Zhang)
- Fix various problems in handling the Command Supported and
Effects log (Christoph Hellwig)
- Don't allow unprivileged passthrough of commands that don't
transfer data but modify logical block content (Christoph
Hellwig)
- Add a features and quirks policy document (Christoph Hellwig)
- Fix some really nasty code that was correct but made smatch
complain (Sagi Grimberg)
- Use-after-free regression in BFQ from this merge window (Yu)"
* tag 'block-6.2-2022-12-29' of git://git.kernel.dk/linux:
nvme-auth: fix smatch warning complaints
nvme: consult the CSE log page for unprivileged passthrough
nvme: also return I/O command effects from nvme_command_effects
nvmet: don't defer passthrough commands with trivial effects to the workqueue
nvmet: set the LBCC bit for commands that modify data
nvmet: use NVME_CMD_EFFECTS_CSUPP instead of open coding it
nvme: fix the NVME_CMD_EFFECTS_CSE_MASK definition
docs, nvme: add a feature and quirk policy document
nvme-pci: update sqsize when adjusting the queue depth
nvme: fix setting the queue depth in nvme_alloc_io_tag_set
block, bfq: fix uaf for bfqq in bfq_exit_icq_bfqq
nvme: fix multipath crash caused by flush request when blktrace is enabled
nvme-pci: fix page size checks
nvme-pci: fix mempool alloc size
nvme-pci: fix doorbell buffer value endianness
|
|
When initializing auth context, there may be no secrets passed
by the user. Make return code explicit when returning successfully.
smatch warnings:
drivers/nvme/host/auth.c:950 nvme_auth_init_ctrl() warn: missing error code? 'ret'
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Commands like Write Zeros can change the contents of a namespaces without
actually transferring data. To protect against this, check the Commands
Supported and Effects log is supported by the controller for any
unprivileg command passthrough and refuse unprivileged passthrough if the
command has any effects that can change data or metadata.
Note: While the Commands Support and Effects log page has only been
mandatory since NVMe 2.0, it is widely supported because Windows requires
it for any command passthrough from userspace.
Fixes: e4fbcf32c860 ("nvme: identify-namespace without CAP_SYS_ADMIN")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
|
|
To be able to use the Commands Supported and Effects Log for allowing
unprivileged passtrough, it needs to be corretly reported for I/O
commands as well. Return the I/O command effects from
nvme_command_effects, and also add a default list of effects for the
NVM command set. For other command sets, the Commands Supported and
Effects log is required to be present already.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
|
|
Mask out the "Command Supported" and "Logical Block Content Change" bits
and only defer execution of commands that have non-trivial effects to
the workqueue for synchronous execution. This allows to execute admin
commands asynchronously on controllers that provide a Command Supported
and Effects log page, and will keep allowing to execute Write commands
asynchronously once command effects on I/O commands are taken into
account.
Fixes: c1fef73f793b ("nvmet: add passthru code to process commands")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
|
|
Write, Write Zeroes, Zone append and a Zone Reset through
Zone Management Send modify the logical block content of a namespace,
so make sure the LBCC bit is reported for them.
Fixes: b5d0b38c0475 ("nvmet: add Command Set Identifier support")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
|
|
Use NVME_CMD_EFFECTS_CSUPP instead of open coding it and assign a
single value to multiple array entries instead of repeated assignments.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
|
|
Update the core sqsize field in addition to the PCIe-specific
q_depth field as the core tagset allocation helpers rely on it.
Fixes: 0da7feaa5913 ("nvme-pci: use the tagset alloc/free helpers")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Hugh Dickins <hughd@google.com>
Link: https://lore.kernel.org/r/20221225103234.226794-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
While the CAP.MQES field in NVMe is a 0s based filed with a natural one
off, we also need to account for the queue wrap condition and fix undo
the one off again in nvme_alloc_io_tag_set. This was never properly
done by the fabrics drivers, but they don't seem to care because there
is no actual physical queue that can wrap around, but it became a
problem when converting over the PCIe driver. Also add back the
BLK_MQ_MAX_DEPTH check that was lost in the same commit.
Fixes: 0da7feaa5913 ("nvme-pci: use the tagset alloc/free helpers")
Reported-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Hugh Dickins <hughd@google.com>
Link: https://lore.kernel.org/r/20221225103234.226794-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull more SCSI updates from James Bottomley:
"Mostly small bug fixes and small updates.
The only things of note is a qla2xxx fix for crash on hotplug and
timeout and the addition of a user exposed abstraction layer for
persistent reservation error return handling (which necessitates the
conversion of nvme.c as well as SCSI)"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: qla2xxx: Fix crash when I/O abort times out
nvme: Convert NVMe errors to PR errors
scsi: sd: Convert SCSI errors to PR errors
scsi: core: Rename status_byte to sg_status_byte
block: Add error codes for common PR failures
scsi: sd: sd_zbc: Trace zone append emulation
scsi: libfc: Include the correct header
|