| Age | Commit message (Collapse) | Author |
|---|
|
[ Upstream commit 487a3ea7b1b8ba2ca7d2c2bb3c3594dc360d6261 ]
nvme_validate_passthru_nsid() logs an err message whose format string is
split over 2 lines. There is a missing space between the two pieces,
resulting in log lines like "... does not match nsid (1)of namespace".
Add the missing space between ")" and "of". Also combine the format
string pieces onto a single line to make the err message easier to grep.
Fixes: e7d4b5493a2d ("nvme: factor out a nvme_validate_passthru_nsid helper")
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 578539e0969028f711c34d9a4565931edfe1d730 ]
nvme_tcp_init_connection() attempts to receive an ICResp PDU but only
checks that the return value from recvmsg() is non-negative. If the
sender closes the TCP connection or sends fewer than 128 bytes, this
check will pass even though the full PDU wasn't received.
Ensure the full ICResp PDU is received by checking that recvmsg()
returns the expected 128 bytes.
Additionally set the MSG_WAITALL flag for recvmsg(), as a sender could
split the ICResp over multiple TCP frames. Without MSG_WAITALL,
recvmsg() could return prematurely with only part of the PDU.
Fixes: 3f2304f8c6d6 ("nvme-tcp: add NVMe over TCP host driver")
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit cd513e0434c3e736c549bc99bf7982658b25114d ]
When compiling with W=1, a warning result for the function
nvme_tcp_set_queue_io_cpu():
host/tcp.c:1578: warning: Function parameter or struct member 'queue'
not described in 'nvme_tcp_set_queue_io_cpu'
host/tcp.c:1578: warning: expecting prototype for Track the number of
queues assigned to each cpu using a global per(). Prototype was for
nvme_tcp_set_queue_io_cpu() instead
Avoid this warning by using the regular comment format for the function
nvme_tcp_set_queue_io_cpu() instead of the kdoc comment format.
Fixes: 32193789878c ("nvme-tcp: Fix I/O queue cpu spreading for multiple controllers")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 11cb3529d18514f7d28ad2190533192aedefd761 upstream.
On the TUXEDO InfinityBook Pro Gen9 Intel, a Samsung 990 Evo NVMe leads to
a high power consumption in s2idle sleep (4 watts).
This patch applies 'Force No Simple Suspend' quirk to achieve a sleep with
a lower power consumption, typically around 1.2 watts.
Signed-off-by: Georg Gottleuber <ggo@tuxedocomputers.com>
Cc: stable@vger.kernel.org
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit dbf2bb1a1319b7c7d8828905378a6696cca6b0f2 upstream.
On the TUXEDO InfinityFlex, a Samsung 990 Evo NVMe leads to a high power
consumption in s2idle sleep (4 watts).
This patch applies 'Force No Simple Suspend' quirk to achieve a sleep with
a lower power consumption, typically around 1.4 watts.
Signed-off-by: Georg Gottleuber <ggo@tuxedocomputers.com>
Cc: stable@vger.kernel.org
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit c8ed6cb5d37bc09c7e25e49a670e9fd1a3bd1dfa ]
Do not access the state variable directly, instead use proper
synchronization so not stale data is read.
Fixes: e6e7f7ac03e4 ("nvme: ensure reset state check ordering")
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2d1a2dab95cdc6f2e0c6af3c0514b0bea94af482 ]
To suppress the compiler "warning: symbol 'nvme_tls_attrs_group' was not
declared. Should it be static?"
Fixes: 1e48b34c9bc79a ("nvme: split off TLS sysfs attributes into a separate group")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 294b2b7516fd06a8dd82e4a6118f318ec521e706 ]
When the set feature attempts fails with any NVME status code set in
nvme_set_queue_count, the function still report success. Though the
numbers of queues set to 0. This is done to support controllers in
degraded state (the admin queue is still up and running but no IO
queues).
Though there is an exception. When nvme_set_features reports an host
path error, nvme_set_queue_count should propagate this error as the
connectivity is lost, which means also the admin queue is not working
anymore.
Fixes: 9a0be7abb62f ("nvme: refactor set_queue_count")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 170e086ad3997f816d1f551f178a03a626a130b7 ]
nvme_init_effects_log() returns failure when kzalloc() is successful,
which is obviously wrong and causes failures to boot. Correct the
check.
Fixes: d4a95adeabc6 ("nvme: Add error path for xa_store in nvme_init_effects")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d4a95adeabc6b5a39405e49c6d5ed14dd83682c4 ]
The xa_store() may fail due to memory allocation failure because there
is no guarantee that the index NVME_CSI_NVM is already used. This fix
introduces a new function to handle the error path.
Fixes: cc115cbe12d9 ("nvme: always initialize known command effects")
Signed-off-by: Keisuke Nishimura <keisuke.nishimura@inria.fr>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ac32057acc7f3d7a238dafaa9b2aa2bc9750080e ]
The xa_store() may fail due to memory allocation failure because there
is no guarantee that the index csi is already used. This fix adds an
error check of the return value of xa_store() in nvme_get_effects_log().
Fixes: 1cf7a12e09aa ("nvme: use an xarray to lookup the Commands Supported and Effects log")
Signed-off-by: Keisuke Nishimura <keisuke.nishimura@inria.fr>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 32193789878c259e39b97bd0c0f2f0ccbe5cb8a8 ]
Since day-1 we are assigning the queue io_cpu very naively. We always
base the queue id (controller scope) and assign it its matching cpu
from the online mask. This works fine when the number of queues match
the number of cpu cores.
The problem starts when we have less queues than cpu cores. First, we
should take into account the mq_map and select a cpu within the cpus
that are assigned to this queue by the mq_map in order to minimize cross
numa cpu bouncing.
Second, even worse is that we don't take into account multiple
controllers may have assigned queues to a given cpu. As a result we may
simply compund more and more queues on the same set of cpus, which is
suboptimal.
We fix this by introducing global per-cpu counters that tracks the
number of queues assigned to each cpu, and we select the least used cpu
based on the mq_map and the per-cpu counters, and assign it as the queue
io_cpu.
The behavior for a single controller is slightly optimized by selecting
better cpu candidates by consulting with the mq_map, and multiple
controllers are spreading queues among cpu cores much better, resulting
in lower average cpu load, and less likelihood to hit hotspots.
Note that the accounting is not 100% perfect, but we don't need to be,
we're simply putting our best effort to select the best candidate cpu
core that we find at any given point.
Another byproduct is that every controller reset/reconnect may change
the queues io_cpu mapping, based on the current LRU accounting scheme.
Here is the baseline queue io_cpu assignment for 4 controllers, 2 queues
per controller, and 4 cpus on the host:
nvme1: queue 0: using cpu 0
nvme1: queue 1: using cpu 1
nvme2: queue 0: using cpu 0
nvme2: queue 1: using cpu 1
nvme3: queue 0: using cpu 0
nvme3: queue 1: using cpu 1
nvme4: queue 0: using cpu 0
nvme4: queue 1: using cpu 1
And this is the fixed io_cpu assignment:
nvme1: queue 0: using cpu 0
nvme1: queue 1: using cpu 2
nvme2: queue 0: using cpu 1
nvme2: queue 1: using cpu 3
nvme3: queue 0: using cpu 0
nvme3: queue 1: using cpu 2
nvme4: queue 0: using cpu 1
nvme4: queue 1: using cpu 3
Fixes: 3f2304f8c6d6 ("nvme-tcp: add NVMe over TCP host driver")
Suggested-by: Hannes Reinecke <hare@kernel.org>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
[fixed kbuild reported errors]
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b579d6fdc3a9149bb4d2b3133cc0767130ed13e6 ]
Ensure we propagate npwg to the target as well instead
of assuming its the same logical blocks per physical block.
This ensures devices with large IUs information properly
propagated on the target.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4db3d750ac7e894278ef1cb1c53cc7d883060496 ]
nvmet_root_discovery_nqn_store treats the subsysnqn string like a fixed
size buffer, even though it is dynamically allocated to the size of the
string.
Create a new string with kstrndup instead of using the old buffer.
Reported-by: syzbot+ff4aab278fa7e27e0f9e@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=ff4aab278fa7e27e0f9e
Fixes: 95409e277d83 ("nvmet: implement unique discovery NQN")
Signed-off-by: Leo Stone <leocstone@gmail.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ebefac5647968679f6ef5803e5d35a71997d20fa ]
We initially introduced a quick fix limiting the queue depth to 1 as
experimentation showed that it fixed data corruption on 64GB steamdecks.
Further experimentation revealed corruption only happens when the last
PRP data element aligns to the end of the page boundary. The device
appears to treat this as a PRP chain to a new list instead of the data
element that it actually is. This implementation is in violation of the
spec. Encountering this errata with the Linux driver requires the host
request a 128k transfer and coincidently be handed the last small pool
dma buffer within a page.
The QD1 quirk effectly works around this because the last data PRP
always was at a 248 byte offset from the page start, so it never
appeared at the end of the page, but comes at the expense of throttling
IO and wasting the remainder of the PRP page beyond 256 bytes. Also to
note, the MDTS on these devices is small enough that the "large" prp
pool can hold enough PRP elements to never reach the end, so that pool
is not a problem either.
Introduce a new quirk to ensure the small pool is always aligned such
that the last PRP element can't appear a the end of the page. This comes
at the expense of wasting 256 bytes per small pool page allocated.
Link: https://lore.kernel.org/linux-nvme/20241113043151.GA20077@lst.de/T/#u
Fixes: 83bdfcbdbe5d ("nvme-pci: qdepth 1 quirk")
Cc: Paweł Anikiel <panikiel@google.com>
Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 84488282166de6b6760ada8030e87aaa08bce3aa ]
This reverts commit d06923670b5a5f609603d4a9fee4dec02d38de9c.
It was realized that the fix implemented to contain the race condition
among the keep alive task and the fabric shutdown code path in the commit
d06923670b5ia ("nvme: make keep-alive synchronous operation") is not
optimal. The reason being keep-alive runs under the workqueue and making
it synchronous would waste a workqueue context.
Furthermore, we later found that the above race condition is a regression
caused due to the changes implemented in commit a54a93d0e359 ("nvme: move
stopping keep-alive into nvme_uninit_ctrl()"). So we decided to revert the
commit d06923670b5a ("nvme: make keep-alive synchronous operation") and
then fix the regression.
Link: https://lore.kernel.org/all/196f4013-3bbf-43ff-98b4-9cb2a96c20c2@grimberg.me/
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5858b687559809f05393af745cbadf06dee61295 ]
Kernel will hang on destroy admin_q while we create ctrl failed, such
as following calltrace:
PID: 23644 TASK: ff2d52b40f439fc0 CPU: 2 COMMAND: "nvme"
#0 [ff61d23de260fb78] __schedule at ffffffff8323bc15
#1 [ff61d23de260fc08] schedule at ffffffff8323c014
#2 [ff61d23de260fc28] blk_mq_freeze_queue_wait at ffffffff82a3dba1
#3 [ff61d23de260fc78] blk_freeze_queue at ffffffff82a4113a
#4 [ff61d23de260fc90] blk_cleanup_queue at ffffffff82a33006
#5 [ff61d23de260fcb0] nvme_rdma_destroy_admin_queue at ffffffffc12686ce
#6 [ff61d23de260fcc8] nvme_rdma_setup_ctrl at ffffffffc1268ced
#7 [ff61d23de260fd28] nvme_rdma_create_ctrl at ffffffffc126919b
#8 [ff61d23de260fd68] nvmf_dev_write at ffffffffc024f362
#9 [ff61d23de260fe38] vfs_write at ffffffff827d5f25
RIP: 00007fda7891d574 RSP: 00007ffe2ef06958 RFLAGS: 00000202
RAX: ffffffffffffffda RBX: 000055e8122a4d90 RCX: 00007fda7891d574
RDX: 000000000000012b RSI: 000055e8122a4d90 RDI: 0000000000000004
RBP: 00007ffe2ef079c0 R8: 000000000000012b R9: 000055e8122a4d90
R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000004
R13: 000055e8122923c0 R14: 000000000000012b R15: 00007fda78a54500
ORIG_RAX: 0000000000000001 CS: 0033 SS: 002b
This due to we have quiesced admi_q before cancel requests, but forgot
to unquiesce before destroy it, as a result we fail to drain the
pending requests, and hang on blk_mq_freeze_queue_wait() forever. Here
try to reuse nvme_rdma_teardown_admin_queue() to fix this issue and
simplify the code.
Fixes: 958dc1d32c80 ("nvme-rdma: add clean action for failed reconnection")
Reported-by: Yingfu.zhou <yingfu.zhou@shopee.com>
Signed-off-by: Chunguang.xu <chunguang.xu@shopee.com>
Signed-off-by: Yue.zhao <yue.zhao@shopee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit fec55c29e54d3ca6fe9d7d7d9266098b4514fd34 ]
Now while we create new ctrl failed, we have not free the
tagset occupied by admin_q, here try to fix it.
Fixes: fd1418de10b9 ("nvme-tcp: avoid open-coding nvme_tcp_teardown_admin_queue()")
Signed-off-by: Chunguang.xu <chunguang.xu@shopee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 88c23a32b851e36adc4ab36f796d9b711f47e2bb ]
The NVMe specification states that MAXCMD is mandatory
for NVMe-over-Fabrics implementations. However, some NVMe/TCP
and NVMe/FC arrays from major vendors have buggy firmware
that reports MAXCMD as zero in the Identify Controller data structure.
Currently, the implementation closes the connection in such cases,
completely preventing the host from connecting to the target.
Fix the issue by printing a clear error message about the firmware bug
and allowing the connection to proceed. It assumes that the
target supports a MAXCMD value of SQSIZE + 1. If any issues arise,
the user can manually adjust SQSIZE to mitigate them.
Fixes: 4999568184e5 ("nvme-fabrics: check max outstanding commands")
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Laurence Oberman <loberman@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 58a0c875ce028678c9594c7bdf3fe33462392808 ]
Commit 63dfa1004322 ("nvme: move NVME_QUIRK_DEALLOCATE_ZEROES out of
nvme_config_discard") started applying the NVME_QUIRK_DEALLOCATE_ZEROES
quirk even then the Dataset Management is not supported. It turns out
that there versions of these old Intel SSDs that have DSM support
disabled in the firmware, which will now lead to errors everytime
a Write Zeroes command is issued. Fix this by checking for DSM support
before applying the quirk.
Reported-by: Saeed Mirzamohammadi <saeed.mirzamohammadi@oracle.com>
Fixes: 63dfa1004322 ("nvme: move NVME_QUIRK_DEALLOCATE_ZEROES out of nvme_config_discard")
Tested-by: Saeed Mirzamohammadi <saeed.mirzamohammadi@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Nitesh Shetty <nj.shetty@samsung.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e9869c85c81168a1275f909d5972a3fc435304be ]
The nvme keep-alive operation, which executes at a periodic interval,
could potentially sneak in while shutting down a fabric controller.
This may lead to a race between the fabric controller admin queue
destroy code path (invoked while shutting down controller) and hw/hctx
queue dispatcher called from the nvme keep-alive async request queuing
operation. This race could lead to the kernel crash shown below:
Call Trace:
autoremove_wake_function+0x0/0xbc (unreliable)
__blk_mq_sched_dispatch_requests+0x114/0x24c
blk_mq_sched_dispatch_requests+0x44/0x84
blk_mq_run_hw_queue+0x140/0x220
nvme_keep_alive_work+0xc8/0x19c [nvme_core]
process_one_work+0x200/0x4e0
worker_thread+0x340/0x504
kthread+0x138/0x140
start_kernel_thread+0x14/0x18
While shutting down fabric controller, if nvme keep-alive request sneaks
in then it would be flushed off. The nvme_keep_alive_end_io function is
then invoked to handle the end of the keep-alive operation which
decrements the admin->q_usage_counter and assuming this is the last/only
request in the admin queue then the admin->q_usage_counter becomes zero.
If that happens then blk-mq destroy queue operation (blk_mq_destroy_
queue()) which could be potentially running simultaneously on another
cpu (as this is the controller shutdown code path) would forward
progress and deletes the admin queue. So, now from this point onward
we are not supposed to access the admin queue resources. However the
issue here's that the nvme keep-alive thread running hw/hctx queue
dispatch operation hasn't yet finished its work and so it could still
potentially access the admin queue resource while the admin queue had
been already deleted and that causes the above crash.
The above kernel crash is regression caused due to changes implemented
in commit a54a93d0e359 ("nvme: move stopping keep-alive into
nvme_uninit_ctrl()"). Ideally we should stop keep-alive before destroyin
g the admin queue and freeing the admin tagset so that it wouldn't sneak
in during the shutdown operation. However we removed the keep alive stop
operation from the beginning of the controller shutdown code path in commit
a54a93d0e359 ("nvme: move stopping keep-alive into nvme_uninit_ctrl()")
and added it under nvme_uninit_ctrl() which executes very late in the
shutdown code path after the admin queue is destroyed and its tagset is
removed. So this change created the possibility of keep-alive sneaking in
and interfering with the shutdown operation and causing observed kernel
crash.
To fix the observed crash, we decided to move nvme_stop_keep_alive() from
nvme_uninit_ctrl() to nvme_remove_admin_tag_set(). This change would ensure
that we don't forward progress and delete the admin queue until the keep-
alive operation is finished (if it's in-flight) or cancelled and that would
help contain the race condition explained above and hence avoid the crash.
Moving nvme_stop_keep_alive() to nvme_remove_admin_tag_set() instead of
adding nvme_stop_keep_alive() to the beginning of the controller shutdown
code path in nvme_stop_ctrl(), as was the case earlier before commit
a54a93d0e359 ("nvme: move stopping keep-alive into nvme_uninit_ctrl()"),
would help save one callsite of nvme_stop_keep_alive().
Fixes: a54a93d0e359 ("nvme: move stopping keep-alive into nvme_uninit_ctrl()")
Link: https://lore.kernel.org/all/1a21f37b-0f2a-4745-8c56-4dc8628d3983@linux.ibm.com/
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5dd18f09ce7399df6fffe80d1598add46c395ae9 ]
The code currently uses list_for_each_entry_rcu() while holding an SRCU
lock, triggering false positive warnings with CONFIG_PROVE_RCU=y
enabled:
drivers/nvme/host/multipath.c:168 RCU-list traversed in non-reader section!!
drivers/nvme/host/multipath.c:227 RCU-list traversed in non-reader section!!
drivers/nvme/host/multipath.c:260 RCU-list traversed in non-reader section!!
While the list is properly protected by SRCU lock, the code uses the
wrong list traversal primitive. Replace list_for_each_entry_rcu() with
list_for_each_entry_srcu() to correctly indicate SRCU-based protection
and eliminate the false warning.
Signed-off-by: Breno Leitao <leitao@debian.org>
Fixes: be647e2c76b2 ("nvme: use srcu for iterating namespace list")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit beadf0088501d9dcf2454b05d90d5d31ea3ba55f ]
blk_mq_flush_plug_list submits requests in the reverse order that they
were submitted, which leads to a rather suboptimal I/O pattern especially
in rotational devices. Fix this by rewriting nvme_queue_rqs so that it
always pops the requests from the passed in request list, and then adds
them to the head of a local submit list. This actually simplifies the
code a bit as it removes the complicated list splicing, at the cost of
extra updates of the rq_next pointer. As that should be cache hot
anyway it should be an easy price to pay.
Fixes: d62cbcf62f2f ("nvme: add support for mq_ops->queue_rqs()")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20241113152050.157179-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3c2fb1ca8086eb139b2a551358137525ae8e0d7a ]
The HMB descriptor table is sized to the maximum number of descriptors
that could be used for a given device, but __nvme_alloc_host_mem could
break out of the loop earlier on memory allocation failure and end up
using less descriptors than planned for, which leads to an incorrect
size passed to dma_free_coherent.
In practice this was not showing up because the number of descriptors
tends to be low and the dma coherent allocator always allocates and
frees at least a page.
Fixes: 87ad72a59a38 ("nvme-pci: implement host memory buffer support")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
Pull block fix from Jens Axboe:
"Single fix for an issue triggered with PROVE_RCU=y, with nvme using
the wrong iterators for an SRCU protected list"
* tag 'block-6.12-20241108' of git://git.kernel.dk/linux:
nvme/host: Fix RCU list traversal to use SRCU primitive
|
|
The code currently uses list_for_each_entry_rcu() while holding an SRCU
lock, triggering false positive warnings with CONFIG_PROVE_RCU=y
enabled:
drivers/nvme/host/core.c:3770 RCU-list traversed in non-reader section!!
While the list is properly protected by SRCU lock, the code uses the wrong
list traversal primitive. Replace list_for_each_entry_rcu() with
list_for_each_entry_srcu() to correctly indicate SRCU-based protection
and eliminate the false warning.
Fixes: be647e2c76b2 ("nvme: use srcu for iterating namespace list")
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Pull block fixes from Jens Axboe:
- Fixup for a recent blk_rq_map_user_bvec() patch
- NVMe pull request via Keith:
- Spec compliant identification fix (Keith)
- Module parameter to enable backward compatibility on unusual
namespace formats (Keith)
- Target double free fix when using keys (Vitaliy)
- Passthrough command error handling fix (Keith)
* tag 'block-6.12-20241101' of git://git.kernel.dk/linux:
nvme: re-fix error-handling for io_uring nvme-passthrough
nvmet-auth: assign dh_key to NULL after kfree_sensitive
nvme: module parameter to disable pi with offsets
block: fix queue limits checks in blk_rq_map_user_bvec for real
nvme: enhance cns version checking
|
|
This was previously fixed with commit 1147dd0503564fa0e0348
("nvme: fix error-handling for io_uring nvme-passthrough"), but the
change was mistakenly undone in a later commit.
Fixes: d6aacee9255e7f ("nvme: use bio_integrity_map_user")
Cc: stable@vger.kernel.org
Reported-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anuj Gupta <anuj20.g@samsung.com>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
ctrl->dh_key might be used across multiple calls to nvmet_setup_dhgroup()
for the same controller. So it's better to nullify it after release on
error path in order to avoid double free later in nvmet_destroy_auth().
Found by Linux Verification Center (linuxtesting.org) with Svace.
Fixes: 7a277c37d352 ("nvmet-auth: Diffie-Hellman key exchange support")
Cc: stable@vger.kernel.org
Signed-off-by: Vitaliy Shevtsov <v.shevtsov@maxima.ru>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
A recent commit enables integrity checks for formats the previous kernel
versions registered with the "nop" integrity profile. This means
namespaces using that format become unreadable when upgrading the kernel
past that commit.
Introduce a module parameter to restore the "nop" integrity profile so
that storage can be readable once again. This could be a boot device, so
the setting needs to happen at module load time.
Fixes: 921e81db524d17 ("nvme: allow integrity when PI is not in first bytes")
Reported-by: David Wei <dw@davidwei.uk>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The number of CNS bits in the command is specific to the nvme spec
version compliance. The existing check is not sufficient for possible
CNS values the driver uses that may create confusion between host and
device, so enhance the check to consider the version and desired CNS
value.
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Pull block fixes from Jens Axboe:
- NVMe pull request via Keith:
- Fix target passthrough identifier (Nilay)
- Fix tcp locking (Hannes)
- Replace list with sbitmap for tracking RDMA rsp tags (Guixen)
- Remove unnecessary fallthrough statements (Tokunori)
- Remove ready-without-media support (Greg)
- Fix multipath partition scan deadlock (Keith)
- Fix concurrent PCI reset and remove queue mapping (Maurizio)
- Fabrics shutdown fixes (Nilay)
- Fix for a kerneldoc warning (Keith)
- Fix a race with blk-rq-qos and wakeups (Omar)
- Cleanup of checking for always-set tag_set (SurajSonawane2415)
- Fix for a crash with CPU hotplug notifiers (Ming)
- Don't allow zero-copy ublk on unprivileged device (Ming)
- Use array_index_nospec() for CDROM (Josh)
- Remove dead code in drbd (David)
- Tweaks to elevator loading (Breno)
* tag 'block-6.12-20241018' of git://git.kernel.dk/linux:
cdrom: Avoid barrier_nospec() in cdrom_ioctl_media_changed()
nvme: use helper nvme_ctrl_state in nvme_keep_alive_finish function
nvme: make keep-alive synchronous operation
nvme-loop: flush off pending I/O while shutting down loop controller
nvme-pci: fix race condition between reset and nvme_dev_disable()
ublk: don't allow user copy for unprivileged device
blk-rq-qos: fix crash on rq_qos_wait vs. rq_qos_wake_function race
nvme-multipath: defer partition scanning
blk-mq: setup queue ->tag_set before initializing hctx
elevator: Remove argument from elevator_find_get
elevator: do not request_module if elevator exists
drbd: Remove unused conn_lowest_minor
nvme: disable CC.CRIME (NVME_CC_CRIME)
nvme: delete unnecessary fallthru comment
nvmet-rdma: use sbitmap to replace rsp free list
block: Fix elevator_get_default() checking for NULL q->tag_set
nvme: tcp: avoid race between queue_lock lock and destroy
nvmet-passthru: clear EUID/NGUID/UUID while using loop target
block: fix blk_rq_map_integrity_sg kernel-doc
|
|
We no more need acquiring ctrl->lock before accessing the
NVMe controller state and instead we can now use the helper
nvme_ctrl_state. So replace the use of ctrl->lock from
nvme_keep_alive_finish function with nvme_ctrl_state call.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The nvme keep-alive operation, which executes at a periodic interval,
could potentially sneak in while shutting down a fabric controller.
This may lead to a race between the fabric controller admin queue
destroy code path (invoked while shutting down controller) and hw/hctx
queue dispatcher called from the nvme keep-alive async request queuing
operation. This race could lead to the kernel crash shown below:
Call Trace:
autoremove_wake_function+0x0/0xbc (unreliable)
__blk_mq_sched_dispatch_requests+0x114/0x24c
blk_mq_sched_dispatch_requests+0x44/0x84
blk_mq_run_hw_queue+0x140/0x220
nvme_keep_alive_work+0xc8/0x19c [nvme_core]
process_one_work+0x200/0x4e0
worker_thread+0x340/0x504
kthread+0x138/0x140
start_kernel_thread+0x14/0x18
While shutting down fabric controller, if nvme keep-alive request sneaks
in then it would be flushed off. The nvme_keep_alive_end_io function is
then invoked to handle the end of the keep-alive operation which
decrements the admin->q_usage_counter and assuming this is the last/only
request in the admin queue then the admin->q_usage_counter becomes zero.
If that happens then blk-mq destroy queue operation (blk_mq_destroy_
queue()) which could be potentially running simultaneously on another
cpu (as this is the controller shutdown code path) would forward
progress and deletes the admin queue. So, now from this point onward
we are not supposed to access the admin queue resources. However the
issue here's that the nvme keep-alive thread running hw/hctx queue
dispatch operation hasn't yet finished its work and so it could still
potentially access the admin queue resource while the admin queue had
been already deleted and that causes the above crash.
This fix helps avoid the observed crash by implementing keep-alive as a
synchronous operation so that we decrement admin->q_usage_counter only
after keep-alive command finished its execution and returns the command
status back up to its caller (blk_execute_rq()). This would ensure that
fabric shutdown code path doesn't destroy the fabric admin queue until
keep-alive request finished execution and also keep-alive thread is not
running hw/hctx queue dispatch operation.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
While shutting down loop controller, we first quiesce the admin/IO queue,
delete the admin/IO tag-set and then at last destroy the admin/IO queue.
However it's quite possible that during the window between quiescing and
destroying of the admin/IO queue, some admin/IO request might sneak in
and if that happens then we could potentially encounter a hung task
because shutdown operation can't forward progress until any pending I/O
is flushed off.
This commit helps ensure that before destroying the admin/IO queue, we
unquiesce the admin/IO queue so that any outstanding requests, which are
added after the admin/IO queue is quiesced, are now flushed to its
completion.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
nvme_dev_disable() modifies the dev->online_queues field, therefore
nvme_pci_update_nr_queues() should avoid racing against it, otherwise
we could end up passing invalid values to blk_mq_update_nr_hw_queues().
WARNING: CPU: 39 PID: 61303 at drivers/pci/msi/api.c:347
pci_irq_get_affinity+0x187/0x210
Workqueue: nvme-reset-wq nvme_reset_work [nvme]
RIP: 0010:pci_irq_get_affinity+0x187/0x210
Call Trace:
<TASK>
? blk_mq_pci_map_queues+0x87/0x3c0
? pci_irq_get_affinity+0x187/0x210
blk_mq_pci_map_queues+0x87/0x3c0
nvme_pci_map_queues+0x189/0x460 [nvme]
blk_mq_update_nr_hw_queues+0x2a/0x40
nvme_reset_work+0x1be/0x2a0 [nvme]
Fix the bug by locking the shutdown_lock mutex before using
dev->online_queues. Give up if nvme_dev_disable() is running or if
it has been executed already.
Fixes: 949928c1c731 ("NVMe: Fix possible queue use after freed")
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
We need to suppress the partition scan from occuring within the
controller's scan_work context. If a path error occurs here, the IO will
wait until a path becomes available or all paths are torn down, but that
action also occurs within scan_work, so it would deadlock. Defer the
partion scan to a different context that does not block scan_work.
Reported-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Disable NVME_CC_CRIME so that CSTS.RDY indicates that the media
is ready and able to handle commands without returning
NVME_SC_ADMIN_COMMAND_MEDIA_NOT_READY.
Signed-off-by: Greg Joyce <gjoyce@linux.ibm.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Tested-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Signed-off-by: Tokunori Ikegami <ikegami.t@gmail.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
We can use sbitmap to manage all the nvmet_rdma_rsp instead of using
free lists and spinlock, and we can use an additional tag to
determine whether the nvmet_rdma_rsp is extra allocated.
In addition, performance has improved:
1. testing environment is local rxe rdma devie and mem-based
backstore device.
2. fio command, test the average 5 times:
fio -filename=/dev/nvme0n1 --ioengine=libaio -direct=1
-size=1G -name=1 -thread -runtime=60 -time_based -rw=read -numjobs=16
-iodepth=128 -bs=4k -group_reporting
3. Before: 241k IOPS, After: 256k IOPS, an increase of about 5%.
Signed-off-by: Guixin Liu <kanie@linux.alibaba.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
|
|
Commit 76d54bf20cdc ("nvme-tcp: don't access released socket during
error recovery") added a mutex_lock() call for the queue->queue_lock
in nvme_tcp_get_address(). However, the mutex_lock() races with
mutex_destroy() in nvme_tcp_free_queue(), and causes the WARN below.
DEBUG_LOCKS_WARN_ON(lock->magic != lock)
WARNING: CPU: 3 PID: 34077 at kernel/locking/mutex.c:587 __mutex_lock+0xcf0/0x1220
Modules linked in: nvmet_tcp nvmet nvme_tcp nvme_fabrics iw_cm ib_cm ib_core pktcdvd nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables qrtr sunrpc ppdev 9pnet_virtio 9pnet pcspkr netfs parport_pc parport e1000 i2c_piix4 i2c_smbus loop fuse nfnetlink zram bochs drm_vram_helper drm_ttm_helper ttm drm_kms_helper xfs drm sym53c8xx floppy nvme scsi_transport_spi nvme_core nvme_auth serio_raw ata_generic pata_acpi dm_multipath qemu_fw_cfg [last unloaded: ib_uverbs]
CPU: 3 UID: 0 PID: 34077 Comm: udisksd Not tainted 6.11.0-rc7 #319
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014
RIP: 0010:__mutex_lock+0xcf0/0x1220
Code: 08 84 d2 0f 85 c8 04 00 00 8b 15 ef b6 c8 01 85 d2 0f 85 78 f4 ff ff 48 c7 c6 20 93 ee af 48 c7 c7 60 91 ee af e8 f0 a7 6d fd <0f> 0b e9 5e f4 ff ff 48 b8 00 00 00 00 00 fc ff df 4c 89 f2 48 c1
RSP: 0018:ffff88811305f760 EFLAGS: 00010286
RAX: 0000000000000000 RBX: ffff88812c652058 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000004 RDI: 0000000000000001
RBP: ffff88811305f8b0 R08: 0000000000000001 R09: ffffed1075c36341
R10: ffff8883ae1b1a0b R11: 0000000000010498 R12: 0000000000000000
R13: 0000000000000000 R14: dffffc0000000000 R15: ffff88812c652058
FS: 00007f9713ae4980(0000) GS:ffff8883ae180000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fcd78483c7c CR3: 0000000122c38000 CR4: 00000000000006f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
? __warn.cold+0x5b/0x1af
? __mutex_lock+0xcf0/0x1220
? report_bug+0x1ec/0x390
? handle_bug+0x3c/0x80
? exc_invalid_op+0x13/0x40
? asm_exc_invalid_op+0x16/0x20
? __mutex_lock+0xcf0/0x1220
? nvme_tcp_get_address+0xc2/0x1e0 [nvme_tcp]
? __pfx___mutex_lock+0x10/0x10
? __lock_acquire+0xd6a/0x59e0
? nvme_tcp_get_address+0xc2/0x1e0 [nvme_tcp]
nvme_tcp_get_address+0xc2/0x1e0 [nvme_tcp]
? __pfx_nvme_tcp_get_address+0x10/0x10 [nvme_tcp]
nvme_sysfs_show_address+0x81/0xc0 [nvme_core]
dev_attr_show+0x42/0x80
? __asan_memset+0x1f/0x40
sysfs_kf_seq_show+0x1f0/0x370
seq_read_iter+0x2cb/0x1130
? rw_verify_area+0x3b1/0x590
? __mutex_lock+0x433/0x1220
vfs_read+0x6a6/0xa20
? lockdep_hardirqs_on+0x78/0x100
? __pfx_vfs_read+0x10/0x10
ksys_read+0xf7/0x1d0
? __pfx_ksys_read+0x10/0x10
? __x64_sys_openat+0x105/0x1d0
do_syscall_64+0x93/0x180
? lockdep_hardirqs_on_prepare+0x16d/0x400
? do_syscall_64+0x9f/0x180
? lockdep_hardirqs_on+0x78/0x100
? do_syscall_64+0x9f/0x180
? __pfx_ksys_read+0x10/0x10
? lockdep_hardirqs_on_prepare+0x16d/0x400
? do_syscall_64+0x9f/0x180
? lockdep_hardirqs_on+0x78/0x100
? do_syscall_64+0x9f/0x180
? lockdep_hardirqs_on_prepare+0x16d/0x400
? do_syscall_64+0x9f/0x180
? lockdep_hardirqs_on+0x78/0x100
? do_syscall_64+0x9f/0x180
? lockdep_hardirqs_on_prepare+0x16d/0x400
? do_syscall_64+0x9f/0x180
? lockdep_hardirqs_on+0x78/0x100
? do_syscall_64+0x9f/0x180
? lockdep_hardirqs_on_prepare+0x16d/0x400
? do_syscall_64+0x9f/0x180
? lockdep_hardirqs_on+0x78/0x100
? do_syscall_64+0x9f/0x180
? do_syscall_64+0x9f/0x180
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7f9713f55cfa
Code: 55 48 89 e5 48 83 ec 20 48 89 55 e8 48 89 75 f0 89 7d f8 e8 e8 74 f8 ff 48 8b 55 e8 48 8b 75 f0 41 89 c0 8b 7d f8 31 c0 0f 05 <48> 3d 00 f0 ff ff 77 2e 44 89 c7 48 89 45 f8 e8 42 75 f8 ff 48 8b
RSP: 002b:00007ffd7f512e70 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
RAX: ffffffffffffffda RBX: 000055c38f316859 RCX: 00007f9713f55cfa
RDX: 0000000000000fff RSI: 00007ffd7f512eb0 RDI: 0000000000000011
RBP: 00007ffd7f512e90 R08: 0000000000000000 R09: 00000000ffffffff
R10: 0000000000000000 R11: 0000000000000246 R12: 000055c38f317148
R13: 0000000000000000 R14: 00007f96f4004f30 R15: 000055c3b6b623c0
</TASK>
The WARN is observed when the blktests test case nvme/014 is repeated
with tcp transport. It is rare, and 200 times repeat is required to
recreate in some test environments.
To avoid the WARN, check the NVME_TCP_Q_LIVE flag before locking
queue->queue_lock. The flag is cleared long time before the lock gets
destroyed.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.
auto-generated by the following:
for i in `git grep -l -w asm/unaligned.h`; do
sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
|
|
When nvme passthru is configured using loop target, the clear_ids
attribute is, by default, set to true. This attribute would ensure that
EUID/NGUID/UUID is cleared for the loop passthru target.
The newer NVMe disk supporting the NVMe spec 1.3 or higher, typically,
implements the support for "Namespace Identification Descriptor list"
command. This command when issued from host returns EUID/NGUID/UUID
assigned to the inquired namespace. Not clearing these values, while
using nvme passthru using loop target, would result in NVMe host driver
rejecting the namespace. This check was implemented in the commit
2079f41ec6ff ("nvme: check that EUI/GUID/UUID are globally unique").
The fix implemented in this commit ensure that when host issues ns-id
descriptor list command, the EUID/NGUID/UUID are cleared by passthru
target. In fact, the function nvmet_passthru_override_id_descs() which
clears those unique ids already exits, so we just need to ensure that
ns-id descriptor list command falls through the corretc code path. And
while we're at it, we also combines the three passthru admin command
cases together which shares the same code.
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Pull more block updates from Jens Axboe:
- Improve blk-integrity segment counting and merging (Keith)
- NVMe pull request via Keith:
- Multipath fixes (Hannes)
- Sysfs attribute list NULL terminate fix (Shin'ichiro)
- Remove problematic read-back (Keith)
- Fix for a regression with the IO scheduler switching freezing from
6.11 (Damien)
- Use a raw spinlock for sbitmap, as it may get called from preempt
disabled context (Ming)
- Cleanup for bd_claiming waiting, using var_waitqueue() rather than
the bit waitqueues, as that more accurately describes that it does
(Neil)
- Various cleanups (Kanchan, Qiu-ji, David)
* tag 'for-6.12/block-20240925' of git://git.kernel.dk/linux:
nvme: remove CC register read-back during enabling
nvme: null terminate nvme_tls_attrs
nvme-multipath: avoid hang on inaccessible namespaces
nvme-multipath: system fails to create generic nvme device
lib/sbitmap: define swap_lock as raw_spinlock_t
block: Remove unused blk_limits_io_{min,opt}
drbd: Fix atomicity violation in drbd_uuid_set_bm()
block: Fix elv_iosched_local_module handling of "none" scheduler
block: remove bogus union
block: change wait on bd_claiming to use a var_waitqueue
blk-integrity: improved sg segment mapping
block: unexport blk_rq_count_integrity_sg
nvme-rdma: use request to get integrity segments
scsi: use request to get integrity segments
block: provide a request helper for user integrity segments
blk-integrity: consider entire bio list for merging
blk-integrity: properly account for segments
blk-mq: set the nr_integrity_segments from bio
blk-mq: unconditional nr_integrity_segments
|
|
Any non-posted read should flush the previous write, so we don't
necessarily need to read back the value we just wrote. I've found at
least some controllers that respond with 0 for short moments after
writing the CC register with EN (enable) cleared, so the read-back is
overwriting our valid ctrl_config value and ends up breaking on the
subsequent enabling.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Commit 1e48b34c9bc7 ("nvme: split off TLS sysfs attributes into a
separate group") introduced the struct attribute array nvme_tls_attrs.
However, the array was not null terminated and caused BUG KASAN global-
out-of-bounds. To avoid the BUG, null terminate the array.
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Closes: https://lore.kernel.org/linux-nvme/jhllwfxcedrcxcnbajwl4x2l2ujcqowqcd4ps574zrafrqhjna@f4icvecutekm/
Fixes: 1e48b34c9bc7 ("nvme: split off TLS sysfs attributes into a separate group")
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
During repetitive namespace remapping operations on the target the
namespace might have changed between the time the initial scan
was performed, and partition scan was invoked by device_add_disk()
in nvme_mpath_set_live(). We then end up with a stuck scanning process:
[<0>] folio_wait_bit_common+0x12a/0x310
[<0>] filemap_read_folio+0x97/0xd0
[<0>] do_read_cache_folio+0x108/0x390
[<0>] read_part_sector+0x31/0xa0
[<0>] read_lba+0xc5/0x160
[<0>] efi_partition+0xd9/0x8f0
[<0>] bdev_disk_changed+0x23d/0x6d0
[<0>] blkdev_get_whole+0x78/0xc0
[<0>] bdev_open+0x2c6/0x3b0
[<0>] bdev_file_open_by_dev+0xcb/0x120
[<0>] disk_scan_partitions+0x5d/0x100
[<0>] device_add_disk+0x402/0x420
[<0>] nvme_mpath_set_live+0x4f/0x1f0 [nvme_core]
[<0>] nvme_mpath_add_disk+0x107/0x120 [nvme_core]
[<0>] nvme_alloc_ns+0xac6/0xe60 [nvme_core]
[<0>] nvme_scan_ns+0x2dd/0x3e0 [nvme_core]
[<0>] nvme_scan_work+0x1a3/0x490 [nvme_core]
This happens when we have several paths, some of which are inaccessible,
and the active paths are removed first. Then nvme_find_path() will requeue
I/O in the ns_head (as paths are present), but the requeue list is never
triggered as all remaining paths are inactive.
This patch checks for NVME_NSHEAD_DISK_LIVE in nvme_available_path(),
and requeue I/O after NVME_NSHEAD_DISK_LIVE has been cleared once
the last path has been removed to properly terminate pending I/O.
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
NVME_NSHEAD_DISK_LIVE is a flag for struct nvme_ns_head, not nvme_ns.
The current code has a typo causing NVME_NSHEAD_DISK_LIVE never to
be cleared once device_add_disk_fails, causing the system never to
create the 'generic' character device. Even several rescan attempts
will change the situation and the system has to be rebooted to fix
the issue.
Fixes: 11384580e332 ("nvme-multipath: add error handling support for add_disk()")
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
"Many singleton patches - please see the various changelogs for
details.
Quite a lot of nilfs2 work this time around.
Notable patch series in this pull request are:
- "mul_u64_u64_div_u64: new implementation" by Nicolas Pitre, with
assistance from Uwe Kleine-König. Reimplement mul_u64_u64_div_u64()
to provide (much) more accurate results. The current implementation
was causing Uwe some issues in the PWM drivers.
- "xz: Updates to license, filters, and compression options" from
Lasse Collin. Miscellaneous maintenance and kinor feature work to
the xz decompressor.
- "Fix some GDB command error and add some GDB commands" from
Kuan-Ying Lee. Fixes and enhancements to the gdb scripts.
- "treewide: add missing MODULE_DESCRIPTION() macros" from Jeff
Johnson. Adds lots of MODULE_DESCRIPTIONs, thus fixing lots of
warnings about this.
- "nilfs2: add support for some common ioctls" from Ryusuke Konishi.
Adds various commonly-available ioctls to nilfs2.
- "This series fixes a number of formatting issues in kernel doc
comments" from Ryusuke Konishi does that.
- "nilfs2: prevent unexpected ENOENT propagation" from Ryusuke
Konishi. Fix issues where -ENOENT was being unintentionally and
inappropriately returned to userspace.
- "nilfs2: assorted cleanups" from Huang Xiaojia.
- "nilfs2: fix potential issues with empty b-tree nodes" from Ryusuke
Konishi fixes some issues which can occur on corrupted nilfs2
filesystems.
- "scripts/decode_stacktrace.sh: improve error reporting and
usability" from Luca Ceresoli does those things"
* tag 'mm-nonmm-stable-2024-09-21-07-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (103 commits)
list: test: increase coverage of list_test_list_replace*()
list: test: fix tests for list_cut_position()
proc: use __auto_type more
treewide: correct the typo 'retun'
ocfs2: cleanup return value and mlog in ocfs2_global_read_info()
nilfs2: remove duplicate 'unlikely()' usage
nilfs2: fix potential oob read in nilfs_btree_check_delete()
nilfs2: determine empty node blocks as corrupted
nilfs2: fix potential null-ptr-deref in nilfs_btree_insert()
user_namespace: use kmemdup_array() instead of kmemdup() for multiple allocation
tools/mm: rm thp_swap_allocator_test when make clean
squashfs: fix percpu address space issues in decompressor_multi_percpu.c
lib: glob.c: added null check for character class
nilfs2: refactor nilfs_segctor_thread()
nilfs2: use kthread_create and kthread_stop for the log writer thread
nilfs2: remove sc_timer_task
nilfs2: do not repair reserved inode bitmap in nilfs_new_inode()
nilfs2: eliminate the shared counter and spinlock for i_generation
nilfs2: separate inode type information from i_state field
nilfs2: use the BITS_PER_LONG macro
...
|
|
Merge in 6.11 final to get the fix for preventing deadlocks on an
elevator switch, as there's a fixup for that patch.
* tag 'v6.11': (1788 commits)
Linux 6.11
Revert "KVM: VMX: Always honor guest PAT on CPUs that support self-snoop"
pinctrl: pinctrl-cy8c95x0: Fix regcache
cifs: Fix signature miscalculation
mm: avoid leaving partial pfn mappings around in error case
drm/xe/client: add missing bo locking in show_meminfo()
drm/xe/client: fix deadlock in show_meminfo()
drm/xe/oa: Enable Xe2+ PES disaggregation
drm/xe/display: fix compat IS_DISPLAY_STEP() range end
drm/xe: Fix access_ok check in user_fence_create
drm/xe: Fix possible UAF in guc_exec_queue_process_msg
drm/xe: Remove fence check from send_tlb_invalidation
drm/xe/gt: Remove double include
net: netfilter: move nf flowtable bpf initialization in nf_flow_table_module_init()
PCI: Fix potential deadlock in pcim_intx()
workqueue: Clear worker->pool in the worker thread context
net: tighten bad gso csum offset check in virtio_net_hdr
netlink: specs: mptcp: fix port endianness
net: dpaa: Pad packets to ETH_ZLEN
mptcp: pm: Fix uaf in __timer_delete_sync
...
|
