summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2025-06-19net: sfp: add quirk for Potron SFP+ XGSPON ONU StickChris Morgan
Add quirk for Potron SFP+ XGSPON ONU Stick (YV SFP+ONT-XGSPON). This device uses pins 2 and 7 for UART communication, so disable TX_FAULT and LOS. Additionally as it is an embedded system in an SFP+ form factor provide it enough time to fully boot before we attempt to use it. https://www.potrontec.com/index/index/list/cat_id/2.html#11-83 https://pon.wiki/xgs-pon/ont/potron-technology/x-onu-sfpp/ Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Link: https://patch.msgid.link/20250617180324.229487-1-macroalpha82@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-19net: usb: Convert tasklet API to new bottom half workqueue mechanismJun Miao
Migrate tasklet APIs to the new bottom half workqueue mechanism. It replaces all occurrences of tasklet usage with the appropriate workqueue APIs throughout the usbnet driver. This transition ensures compatibility with the latest design and enhances performance. Signed-off-by: Jun Miao <jun.miao@intel.com> Link: https://patch.msgid.link/20250618173923.950510-1-jun.miao@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-19igc: Make the const read-only array supported_sizes staticColin Ian King
Don't populate the const read-only array supported_sizes on the stack at run time, instead make it static. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com> Reviewed-by: Vitaly Lifshits <vitaly.lifshits@intel.com>> Link: https://patch.msgid.link/20250618135408.1784120-1-colin.i.king@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-19net: usb: lan78xx: remove unused struct membersOleksij Rempel
Remove unused members from struct lan78xx_net, including: driver_priv suspend_count mdix_ctrl These fields are no longer used in the driver and can be safely removed as part of a cleanup. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/20250618122602.3156678-7-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-19net: usb: lan78xx: Integrate EEE support with phylink LPI APIOleksij Rempel
Refactor Energy-Efficient Ethernet (EEE) support in the LAN78xx driver to fully integrate with the phylink Low Power Idle (LPI) API. This includes: - Replacing direct calls to `phy_ethtool_get_eee` and `phy_ethtool_set_eee` with `phylink_ethtool_get_eee` and `phylink_ethtool_set_eee`. - Implementing `.mac_enable_tx_lpi` and `.mac_disable_tx_lpi` to control LPI transitions via phylink. - Configuring `lpi_timer_default` to align with recommended values from LAN7800 documentation. - ensure EEE is disabled on controller reset Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/20250618122602.3156678-6-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-19net: usb: lan78xx: port link settings to phylink APIOleksij Rempel
Refactor lan78xx_get_link_ksettings and lan78xx_set_link_ksettings to use the phylink API (phylink_ethtool_ksettings_get and phylink_ethtool_ksettings_set) instead of directly interfacing with the PHY. This change simplifies the code and ensures better integration with the phylink framework for link management. Additionally, the explicit calls to usb_autopm_get_interface() and usb_autopm_put_interface() have been removed. These were originally needed to manage USB power management during register accesses. However, lan78xx_mdiobus_read() and lan78xx_mdiobus_write() already handle USB auto power management internally, ensuring that the interface remains active when necessary. Since there are no other direct register accesses in these functions that require explicit power management handling, the extra calls have become redundant and are no longer needed. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/20250618122602.3156678-5-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-19net: usb: lan78xx: Use ethtool_op_get_link to reflect current link statusOleksij Rempel
Replace the custom lan78xx_get_link implementation with the standard ethtool_op_get_link helper, which uses netif_carrier_ok to reflect the current link status accurately. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/20250618122602.3156678-4-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-19net: usb: lan78xx: Rename EVENT_LINK_RESET to EVENT_PHY_INT_ACKOleksij Rempel
The EVENT_LINK_RESET macro currently triggers deferred work after a PHY interrupt. Prior to PHYLINK conversion, this work included reconfiguring the MAC and PHY, effectively performing a 'link reset'. However, after porting the driver to the PHYLINK framework, the logic associated with this event now solely handles the acknowledgment of the PHY interrupt. The MAC and PHY reconfiguration is now managed by PHYLINK's dedicated callbacks. To accurately reflect its current, narrowed functionality, rename EVENT_LINK_RESET to EVENT_PHY_INT_ACK. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/20250618122602.3156678-3-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-19net: usb: lan78xx: Convert to PHYLINK for improved PHY and MAC managementOleksij Rempel
Convert the LAN78xx USB Ethernet driver to use the PHYLINK framework for managing PHY and MAC interactions. This improves consistency with other network drivers, simplifies pause frame handling, and enables cleaner suspend/resume support. Key changes: - Replace all PHYLIB-based logic with PHYLINK equivalents: - Replace phy_connect()/phy_disconnect() with phylink_connect_phy() - Replace phy_start()/phy_stop() with phylink_start()/phylink_stop() - Replace pauseparam handling with phylink_ethtool_get/set_pauseparam() - Introduce lan78xx_phylink_setup() to configure PHYLINK - Add phylink MAC operations: - lan78xx_mac_config() - lan78xx_mac_link_up() - lan78xx_mac_link_down() - Remove legacy link state handling: - lan78xx_link_status_change() - lan78xx_link_reset() - Handle fixed-link fallback for LAN7801 using phylink_set_fixed_link() - Replace deprecated flow control handling with phylink-managed logic Power management: - Switch suspend/resume paths to use phylink_suspend()/phylink_resume() - Ensure proper use of rtnl_lock() where required - Note: full runtime testing of power management is currently limited due to hardware setup constraints Note: Conversion of EEE (Energy Efficient Ethernet) handling to the PHYLINK-managed API will be done in a follow-up patch. For now, the legacy EEE enable logic is preserved in mac_link_up(). Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/20250618122602.3156678-2-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-19net: gianfar: Use device_get_named_child_node_count()Matti Vaittinen
We can avoid open-coding the loop construct which counts firmware child nodes with a specific name by using the newly added device_get_named_child_node_count(). The gianfar driver has such open-coded loop. Replace it with the device_get_child_node_count_named(). Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/3a33988fc042588cb00a0bfc5ad64e749cb0eb1f.1750248902.git.mazziesaccount@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-19net: fec: fec_enet_rx_queue(): factor out VLAN handling into separate ↵Marc Kleine-Budde
function fec_enet_rx_vlan() In order to clean up of the VLAN handling, factor out the VLAN handling into separate function fec_enet_rx_vlan(). Reviewed-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Link: https://patch.msgid.link/20250618-fec-cleanups-v4-11-c16f9a1af124@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-19net: fec: fec_enet_rx_queue(): move_call to _vlan_hwaccel_put_tag()Marc Kleine-Budde
Move __vlan_hwaccel_put_tag() into the if statement that sets vlan_packet_rcvd = true. This change eliminates the unnecessary vlan_packet_rcvd variable, simplifying the code and improving clarity. Reviewed-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Wei Fang <wei.fang@nxp.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Link: https://patch.msgid.link/20250618-fec-cleanups-v4-10-c16f9a1af124@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-19net: fec: fec_enet_rx_queue(): reduce scope of dataMarc Kleine-Budde
In order to clean up of the VLAN handling, reduce the scope of data. Reviewed-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Wei Fang <wei.fang@nxp.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Link: https://patch.msgid.link/20250618-fec-cleanups-v4-9-c16f9a1af124@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-19net: fec: fec_enet_rx_queue(): replace manual VLAN header calculation with ↵Marc Kleine-Budde
skb_vlan_eth_hdr() For better readability and maintainability, use the provided helper function skb_vlan_eth_hdr() to replace manual the VLAN header calculation, and change the type of vlan_header to struct vlan_ethhdr to take into account that the Ethernet header plus VLAN header is returned. Reviewed-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Link: https://patch.msgid.link/20250618-fec-cleanups-v4-8-c16f9a1af124@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-19net: fec: fec_enet_rx_queue(): use same signature as fec_enet_tx_queue()Marc Kleine-Budde
There are the functions fec_enet_rx_queue() and fec_enet_tx_queue(), one for handling the RX queue the other one handles the TX queue. However they don't have the same signature. Align fec_enet_rx_queue() argument order with fec_enet_tx_queue() to make code more readable. Reviewed-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Link: https://patch.msgid.link/20250618-fec-cleanups-v4-7-c16f9a1af124@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-19net: fec: fec_restart(): introduce a define for FEC_ECR_SPEEDMarc Kleine-Budde
Replace "1 << 5" for configuring 1000 MBit/s with a defined constant to improve code readability and maintainability. Reviewed-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Link: https://patch.msgid.link/20250618-fec-cleanups-v4-6-c16f9a1af124@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-19net: fec: rename struct fec_devinfo fec_imx6x_info -> fec_imx6sx_infoMarc Kleine-Budde
In da722186f654 ("net: fec: set GPR bit on suspend by DT configuration.") the platform_device_id fec_devtype::driver_data was converted from holding the quirks to a pointing to struct fec_devinfo. The struct fec_devinfo holding the information for the i.MX6SX was named fec_imx6x_info. Rename fec_imx6x_info to fec_imx6sx_info to align with the SoC's name. Reviewed-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Link: https://patch.msgid.link/20250618-fec-cleanups-v4-5-c16f9a1af124@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-19net: fec: sort the includes by alphabetic orderMarc Kleine-Budde
This is a preparation patch to make addition of new includes easier without breaking the alphabetic order. Suggested-by: Alexander Lobakin <aleksander.lobakin@intel.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Link: https://patch.msgid.link/20250618-fec-cleanups-v4-4-c16f9a1af124@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-19net: fec: switch from asm/cacheflush.h to linux/cacheflush.hMarc Kleine-Budde
To fix the checkpatch warning, use linux/cacheflush.h instead of asm/cacheflush.h. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Reviewed-by: Wei Fang <wei.fang@nxp.com> Link: https://patch.msgid.link/20250618-fec-cleanups-v4-3-c16f9a1af124@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-19net: fec: struct fec_enet_private: remove obsolete commentMarc Kleine-Budde
In commit 4d494cdc92b3 ("net: fec: change data structure to support multiqueue") the data structures were changed, so that the comment about the sent-in-place skb doesn't apply any more. Remove it. Reviewed-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Link: https://patch.msgid.link/20250618-fec-cleanups-v4-2-c16f9a1af124@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-19net: fec: fix typos found by codespellMarc Kleine-Budde
codespell has found some typos in the comments, fix them. Reviewed-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Csókás, Bence <csokas.bence@prolan.hu> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Link: https://patch.msgid.link/20250618-fec-cleanups-v4-1-c16f9a1af124@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-19net: stmmac: loongson1: get ls1b resource only onceRussell King (Oracle)
ls1b_dwmac_syscon_init() was getting the stmmac iomem resource to detect which GMAC block is being used. Move this to a separate setup() function that only runs at probe time, so it can sensibly behave with an unrecognised resource adress. Use this to set a MAC index (id) which is then used in place of testing the base address. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Keguang Zhang <keguang.zhang@gmail.com> Tested-by: Keguang Zhang <keguang.zhang@gmail.com> # on LS1B & LS1C Link: https://patch.msgid.link/E1uRqEE-004c7M-Go@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-19net: stmmac: loongson1: provide match data structRussell King (Oracle)
Provide a structure for match data rather than using the function pointer as match data. This allows stronger type-checking for the function itself, and allows extensions to the match data. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Keguang Zhang <keguang.zhang@gmail.com> Tested-by: Keguang Zhang <keguang.zhang@gmail.com> # on LS1B & LS1C Link: https://patch.msgid.link/E1uRqE9-004c7G-CB@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-19net: stmmac: replace ioaddr with stmmac_priv for pcs_set_ane() methodRussell King (Oracle)
Pass the stmmac_priv structure into the pcs_set_ane() MAC method rather than having callers dereferencing this structure for the IO address. Tested-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> # sa8775p-ride-r3 Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/E1uRqbQ-004djP-1l@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.16-rc3). No conflicts or adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-19net: airoha: Differentiate hwfd buffer size for QDMA0 and QDMA1Lorenzo Bianconi
EN7581 SoC allows configuring the size and the number of buffers in hwfd payload queue for both QDMA0 and QDMA1. In order to reduce the required DRAM used for hwfd buffers queues and decrease the memory footprint, differentiate hwfd buffer size for QDMA0 and QDMA1 and reduce hwfd buffer size to 1KB for QDMA1 (WAN) while maintaining 2KB for QDMA0 (LAN). Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250619-airoha-hw-num-desc-v4-2-49600a9b319a@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-19net: airoha: Compute number of descriptors according to reserved memory sizeLorenzo Bianconi
In order to not exceed the reserved memory size for hwfd buffers, compute the number of hwfd buffers/descriptors according to the reserved memory size and the size of each hwfd buffer (2KB). Fixes: 3a1ce9e3d01b ("net: airoha: Add the capability to allocate hwfd buffers via reserved-memory") Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://patch.msgid.link/20250619-airoha-hw-num-desc-v4-1-49600a9b319a@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-19Merge tag 'wireless-2025-06-18' of ↵Jakub Kicinski
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless Johannes Berg says: ==================== More fixes: - ath12k - avoid busy-waiting - activate correct number of links - iwlwifi - iwldvm regression (lots of warnings) - iwlmld merge damage regression (crash) - fix build with some old gcc versions - carl9170: don't talk to device w/o FW [syzbot] - ath6kl: remove bad FW WARN [syzbot] - ieee80211: use variable-length arrays [syzbot] - mac80211 - remove WARN on delayed beacon update [syzbot] - drop OCB frames with invalid source [syzbot] * tag 'wireless-2025-06-18' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: wifi: iwlwifi: Fix incorrect logic on cmd_ver range checking wifi: iwlwifi: dvm: restore n_no_reclaim_cmds setting wifi: iwlwifi: cfg: Limit cb_size to valid range wifi: iwlwifi: restore missing initialization of async_handlers_list (again) wifi: ath6kl: remove WARN on bad firmware input wifi: carl9170: do not ping device which has failed to load firmware wifi: ath12k: don't wait when there is no vdev started wifi: ath12k: don't use static variables in ath12k_wmi_fw_stats_process() wifi: ath12k: avoid burning CPU while waiting for firmware stats wifi: ath12k: fix documentation on firmware stats wifi: ath12k: don't activate more links than firmware supports wifi: ath12k: update link active in case two links fall on the same MAC wifi: ath12k: support WMI_MLO_LINK_SET_ACTIVE_CMDID command wifi: ath12k: update freq range for each hardware mode wifi: ath12k: parse and save sbs_lower_band_end_freq from WMI_SERVICE_READY_EXT2_EVENTID event wifi: ath12k: parse and save hardware mode info from WMI_SERVICE_READY_EXT_EVENTID event for later use wifi: ath12k: Avoid CPU busy-wait by handling VDEV_STAT and BCN_STAT wifi: mac80211: don't WARN for late channel/color switch wifi: mac80211: drop invalid source address OCB frames wifi: remove zero-length arrays ==================== Link: https://patch.msgid.link/20250618210642.35805-6-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-19mlxbf_gige: return EPROBE_DEFER if PHY IRQ is not availableDavid Thompson
The message "Error getting PHY irq. Use polling instead" is emitted when the mlxbf_gige driver is loaded by the kernel before the associated gpio-mlxbf driver, and thus the call to get the PHY IRQ fails since it is not yet available. The driver probe() must return -EPROBE_DEFER if acpi_dev_gpio_irq_get_by() returns the same. Fixes: 6c2a6ddca763 ("net: mellanox: mlxbf_gige: Replace non-standard interrupt handling") Signed-off-by: David Thompson <davthompson@nvidia.com> Reviewed-by: Asmaa Mnebhi <asmaa@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250618135902.346-1-davthompson@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-19net: airoha: Always check return value from airoha_ppe_foe_get_entry()Lorenzo Bianconi
airoha_ppe_foe_get_entry routine can return NULL, so check the returned pointer is not NULL in airoha_ppe_foe_flow_l2_entry_update() Fixes: b81e0f2b58be3 ("net: airoha: Add FLOW_CLS_STATS callback support") Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://patch.msgid.link/20250618-check-ret-from-airoha_ppe_foe_get_entry-v2-1-068dcea3cc66@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-19Merge tag 'linux-can-next-for-6.17-20250618' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next Marc Kleine-Budde says: ==================== pull-request: can-next 2025-06-18 All 10 patches are by Geert Uytterhoeven, target the rcar_canfd driver, first cleanup/refactor the driver and then add support for Transceiver Delay Compensation. * tag 'linux-can-next-for-6.17-20250618' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next: can: rcar_canfd: Add support for Transceiver Delay Compensation can: rcar_canfd: Return early in rcar_canfd_set_bittiming() when not FD can: rcar_canfd: Share config code in rcar_canfd_set_bittiming() can: rcar_canfd: Rename rcar_canfd_setrnc() to rcar_canfd_set_rnc() can: rcar_canfd: Repurpose f_dcfg base for other registers can: rcar_canfd: Simplify data access in rcar_canfd_{ge,pu}t_data() can: rcar_canfd: Add helper variable dev to rcar_canfd_reset_controller() can: rcar_canfd: Add helper variable ndev to rcar_canfd_rx_pkt() can: rcar_canfd: Remove bittiming debug prints can: rcar_canfd: Consistently use ndev for net_device pointers ==================== Link: https://patch.msgid.link/20250618092336.2175168-1-mkl@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-19net: lan743x: fix potential out-of-bounds write in ↵Alexey Kodanev
lan743x_ptp_io_event_clock_get() Before calling lan743x_ptp_io_event_clock_get(), the 'channel' value is checked against the maximum value of PCI11X1X_PTP_IO_MAX_CHANNELS(8). This seems correct and aligns with the PTP interrupt status register (PTP_INT_STS) specifications. However, lan743x_ptp_io_event_clock_get() writes to ptp->extts[] with only LAN743X_PTP_N_EXTTS(4) elements, using channel as an index: lan743x_ptp_io_event_clock_get(..., u8 channel,...) { ... /* Update Local timestamp */ extts = &ptp->extts[channel]; extts->ts.tv_sec = sec; ... } To avoid an out-of-bounds write and utilize all the supported GPIO inputs, set LAN743X_PTP_N_EXTTS to 8. Detected using the static analysis tool - Svace. Fixes: 60942c397af6 ("net: lan743x: Add support for PTP-IO Event Input External Timestamp (extts)") Signed-off-by: Alexey Kodanev <aleksei.kodanev@bell-sw.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Rengarajan S <rengarajan.s@microchip.com> Link: https://patch.msgid.link/20250616113743.36284-1-aleksei.kodanev@bell-sw.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-06-19net: mana: Handle unsupported HWC commandsErni Sri Satya Vennela
If any of the HWC commands are not recognized by the underlying hardware, the hardware returns the response header status of -1. Log the information using netdev_info_once to avoid multiple error logs in dmesg. Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com> Reviewed-by: Saurabh Singh Sengar <ssengar@linux.microsoft.com> Reviewed-by: Dipayaan Roy <dipayanroy@linux.microsoft.com> Link: https://patch.msgid.link/1750144656-2021-5-git-send-email-ernis@linux.microsoft.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-06-19net: mana: Add speed support in mana_get_link_ksettingsErni Sri Satya Vennela
Allow mana ethtool get_link_ksettings operation to report the maximum speed supported by the SKU in mbps. The driver retrieves this information by issuing a HWC command to the hardware via mana_query_link_cfg(), which retrieves the SKU's maximum supported speed. These APIs when invoked on hardware that are older/do not support these APIs, the speed would be reported as UNKNOWN. Before: $ethtool enP30832s1 > Settings for enP30832s1: Supported ports: [ ] Supported link modes: Not reported Supported pause frame use: No Supports auto-negotiation: No Supported FEC modes: Not reported Advertised link modes: Not reported Advertised pause frame use: No Advertised auto-negotiation: No Advertised FEC modes: Not reported Speed: Unknown! Duplex: Full Auto-negotiation: off Port: Other PHYAD: 0 Transceiver: internal Link detected: yes After: $ethtool enP30832s1 > Settings for enP30832s1: Supported ports: [ ] Supported link modes: Not reported Supported pause frame use: No Supports auto-negotiation: No Supported FEC modes: Not reported Advertised link modes: Not reported Advertised pause frame use: No Advertised auto-negotiation: No Advertised FEC modes: Not reported Speed: 16000Mb/s Duplex: Full Auto-negotiation: off Port: Other PHYAD: 0 Transceiver: internal Link detected: yes Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com> Reviewed-by: Saurabh Singh Sengar <ssengar@linux.microsoft.com> Reviewed-by: Long Li <longli@microsoft.com> Link: https://patch.msgid.link/1750144656-2021-4-git-send-email-ernis@linux.microsoft.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-06-19net: mana: Add support for net_shaper_opsErni Sri Satya Vennela
Introduce support for net_shaper_ops in the MANA driver, enabling configuration of rate limiting on the MANA NIC. To apply rate limiting, the driver issues a HWC command via mana_set_bw_clamp() and updates the corresponding shaper object in the net_shaper cache. If an error occurs during this process, the driver restores the previous speed by querying the current link configuration using mana_query_link_cfg(). The minimum supported bandwidth is 100 Mbps, and only values that are exact multiples of 100 Mbps are allowed. Any other values are rejected. To remove a shaper, the driver resets the bandwidth to the maximum supported by the SKU using mana_set_bw_clamp() and clears the associated cache entry. If an error occurs during this process, the shaper details are retained. On the hardware that does not support these APIs, the net-shaper calls to set speed would fail. Set the speed: ./tools/net/ynl/pyynl/cli.py \ --spec Documentation/netlink/specs/net_shaper.yaml \ --do set --json '{"ifindex":'$IFINDEX', "handle":{"scope": "netdev", "id":'$ID' }, "bw-max": 200000000 }' Get the shaper details: ./tools/net/ynl/pyynl/cli.py \ --spec Documentation/netlink/specs/net_shaper.yaml \ --do get --json '{"ifindex":'$IFINDEX', "handle":{"scope": "netdev", "id":'$ID' }}' > {'bw-max': 200000000, > 'handle': {'scope': 'netdev'}, > 'ifindex': $IFINDEX, > 'metric': 'bps'} Delete the shaper object: ./tools/net/ynl/pyynl/cli.py \ --spec Documentation/netlink/specs/net_shaper.yaml \ --do delete --json '{"ifindex":'$IFINDEX', "handle":{"scope": "netdev","id":'$ID' }}' Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com> Reviewed-by: Saurabh Singh Sengar <ssengar@linux.microsoft.com> Reviewed-by: Long Li <longli@microsoft.com> Link: https://patch.msgid.link/1750144656-2021-3-git-send-email-ernis@linux.microsoft.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-06-19net: mana: Fix potential deadlocks in mana napi opsErni Sri Satya Vennela
When net_shaper_ops are enabled for MANA, netdev_ops_lock becomes active. MANA VF setup/teardown by netvsc follows this call chain: netvsc_vf_setup() dev_change_flags() ... __dev_open() OR __dev_close() dev_change_flags() holds the netdev mutex via netdev_lock_ops. Meanwhile, mana_create_txq() and mana_create_rxq() in mana_open() path call NAPI APIs (netif_napi_add_tx(), netif_napi_add_weight(), napi_enable()), which also try to acquire the same lock, risking deadlock. Similarly in the teardown path (mana_close()), netif_napi_disable() and netif_napi_del(), contend for the same lock. Switch to the _locked variants of these APIs to avoid deadlocks when the netdev_ops_lock is held. Fixes: d4c22ec680c8 ("net: hold netdev instance lock during ndo_open/ndo_stop") Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com> Reviewed-by: Saurabh Singh Sengar <ssengar@linux.microsoft.com> Reviewed-by: Long Li <longli@microsoft.com> Link: https://patch.msgid.link/1750144656-2021-2-git-send-email-ernis@linux.microsoft.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-06-19eth: fbnic: avoid double free when failing to DMA-map FW msgJakub Kicinski
The semantics are that caller of fbnic_mbx_map_msg() retains the ownership of the message on error. All existing callers dutifully free the page. Fixes: da3cde08209e ("eth: fbnic: Add FW communication mechanism") Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20250616195510.225819-1-kuba@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-06-19net/mlx4_en: Remove the redundant NULL check for the 'my_ets' objectAndrey Vatoropin
Static analysis shows that pointer "my_ets" cannot be NULL because it points to the object "struct ieee_ets". Remove the extra NULL check. It is meaningless and harms the readability of the code. Found by Linux Verification Center (linuxtesting.org) with SVACE. Signed-off-by: Andrey Vatoropin <a.vatoropin@crpt.ru> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20250616045034.26000-1-a.vatoropin@crpt.ru Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-06-18net: pse-pd: tps23881: Add support for static port priority featureKory Maincent (Dent Project)
This patch enhances PSE callbacks by introducing support for the static port priority feature. It extends interrupt management to handle and report detection, classification, and disconnection events. Additionally, it introduces the pi_get_pw_req() callback, which provides information about the power requested by the Powered Devices. Interrupt support is essential for the proper functioning of the TPS23881 controller. Without it, after a power-on (PWON), the controller will no longer perform detection and classification. This could lead to potential hazards, such as connecting a non-PoE device after a PoE device, which might result in magic smoke. Signed-off-by: Kory Maincent (Dent Project) <kory.maincent@bootlin.com> Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://patch.msgid.link/20250617-feature_poe_port_prio-v14-12-78a1a645e2ee@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-18net: pse-pd: pd692x0: Add support for controller and manager power suppliesKory Maincent (Dent Project)
Add support for managing the VDD and VDDA power supplies for the PD692x0 PSE controller, as well as the VAUX5 and VAUX3P3 power supplies for the PD6920x PSE managers. Signed-off-by: Kory Maincent (Dent Project) <kory.maincent@bootlin.com> Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://patch.msgid.link/20250617-feature_poe_port_prio-v14-10-78a1a645e2ee@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-18net: pse-pd: pd692x0: Add support for PSE PI priority featureKory Maincent (Dent Project)
This patch extends the PSE callbacks by adding support for the newly introduced pi_set_prio() callback, enabling the configuration of PSE PI priorities. The current port priority is now also included in the status information returned to users. Signed-off-by: Kory Maincent (Dent Project) <kory.maincent@bootlin.com> Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://patch.msgid.link/20250617-feature_poe_port_prio-v14-9-78a1a645e2ee@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-18net: pse-pd: Add support for budget evaluation strategiesKory Maincent (Dent Project)
This patch introduces the ability to configure the PSE PI budget evaluation strategies. Budget evaluation strategies is utilized by PSE controllers to determine which ports to turn off first in scenarios such as power budget exceedance. The pis_prio_max value is used to define the maximum priority level supported by the controller. Both the current priority and the maximum priority are exposed to the user through the pse_ethtool_get_status call. This patch add support for two mode of budget evaluation strategies. 1. Static Method: This method involves distributing power based on PD classification. It’s straightforward and stable, the PSE core keeping track of the budget and subtracting the power requested by each PD’s class. Advantages: Every PD gets its promised power at any time, which guarantees reliability. Disadvantages: PD classification steps are large, meaning devices request much more power than they actually need. As a result, the power supply may only operate at, say, 50% capacity, which is inefficient and wastes money. Priority max value is matching the number of PSE PIs within the PSE. 2. Dynamic Method: To address the inefficiencies of the static method, vendors like Microchip have introduced dynamic power budgeting, as seen in the PD692x0 firmware. This method monitors the current consumption per port and subtracts it from the available power budget. When the budget is exceeded, lower-priority ports are shut down. Advantages: This method optimizes resource utilization, saving costs. Disadvantages: Low-priority devices may experience instability. Priority max value is set by the PSE controller driver. For now, budget evaluation methods are not configurable and cannot be mixed. They are hardcoded in the PSE driver itself, as no current PSE controller supports both methods. Signed-off-by: Kory Maincent (Dent Project) <kory.maincent@bootlin.com> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://patch.msgid.link/20250617-feature_poe_port_prio-v14-7-78a1a645e2ee@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-18net: pse-pd: Add helper to report hardware enable status of the PIKory Maincent (Dent Project)
Refactor code by introducing a helper function to retrieve the hardware enabled state of the PI, avoiding redundant implementations in the future. Signed-off-by: Kory Maincent (Dent Project) <kory.maincent@bootlin.com> Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://patch.msgid.link/20250617-feature_poe_port_prio-v14-6-78a1a645e2ee@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-18net: ethtool: Add support for new power domains index descriptionKory Maincent (Dent Project)
Report the index of the newly introduced PSE power domain to the user, enabling improved management of the power budget for PSE devices. Signed-off-by: Kory Maincent (Dent Project) <kory.maincent@bootlin.com> Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://patch.msgid.link/20250617-feature_poe_port_prio-v14-5-78a1a645e2ee@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-18net: pse-pd: Add support for PSE power domainsKory Maincent (Dent Project)
Introduce PSE power domain support as groundwork for upcoming port priority features. Multiple PSE PIs can now be grouped under a single PSE power domain, enabling future enhancements like defining available power budgets, port priority modes, and disconnection policies. This setup will allow the system to assess whether activating a port would exceed the available power budget, preventing over-budget states proactively. Signed-off-by: Kory Maincent (Dent Project) <kory.maincent@bootlin.com> Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://patch.msgid.link/20250617-feature_poe_port_prio-v14-4-78a1a645e2ee@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-18net: pse-pd: tps23881: Add support for PSE events and interruptsKory Maincent (Dent Project)
Add support for PSE event reporting through interrupts. Set up the newly introduced devm_pse_irq_helper helper to register the interrupt. Events are reported for over-current and over-temperature conditions. Signed-off-by: Kory Maincent (Dent Project) <kory.maincent@bootlin.com> Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://patch.msgid.link/20250617-feature_poe_port_prio-v14-3-78a1a645e2ee@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-18net: pse-pd: Add support for reporting eventsKory Maincent (Dent Project)
Add support for devm_pse_irq_helper() to register PSE interrupts and report events such as over-current or over-temperature conditions. This follows a similar approach to the regulator API but also sends notifications using a dedicated PSE ethtool netlink socket. Signed-off-by: Kory Maincent (Dent Project) <kory.maincent@bootlin.com> Link: https://patch.msgid.link/20250617-feature_poe_port_prio-v14-2-78a1a645e2ee@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-18net: pse-pd: Introduce attached_phydev to pse controlKory Maincent (Dent Project)
In preparation for reporting PSE events via ethtool notifications, introduce an attached_phydev field in the pse_control structure. This field stores the phy_device associated with the PSE PI, ensuring that notifications are sent to the correct network interface. The attached_phydev pointer is directly tied to the PHY lifecycle. It is set when the PHY is registered and cleared when the PHY is removed. There is no need to use a refcount, as doing so could interfere with the PHY removal process. Signed-off-by: Kory Maincent (Dent Project) <kory.maincent@bootlin.com> Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://patch.msgid.link/20250617-feature_poe_port_prio-v14-1-78a1a645e2ee@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-18net: ena: View PHC stats using debugfsDavid Arinzon
Add an entry named `phc_stats` to view the PHC statistics. If PHC is enabled, the stats are printed, as below: phc_cnt: 0 phc_exp: 0 phc_skp: 0 phc_err_dv: 0 phc_err_ts: 0 If PHC is disabled, no statistics will be displayed. Signed-off-by: David Arinzon <darinzon@amazon.com> Link: https://patch.msgid.link/20250617110545.5659-9-darinzon@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-18net: ena: Add debugfs support to the ENA driverDavid Arinzon
Adding the base directory of debugfs to the driver. In order for the folder to be unique per driver instantiation, the chosen name is the device name. This commit contains the initialization and the base folder. The creation of the base folder may fail, but is considered non-fatal. Signed-off-by: David Arinzon <darinzon@amazon.com> Link: https://patch.msgid.link/20250617110545.5659-8-darinzon@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-03 00:08:18 +0000