summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2006-08-29[PATCH] ipw2200: Fix ipw2200 QOS parameters endian issueZhu Yi
Signed-off-by: Jackie Wu <jackie.wu@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-29[PATCH] ipw2200: remove unused struct ipw_rx_bufferZhu Yi
Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-29[PATCH] ipw2200: Reassociate even if set the same essid.Zhu Yi
This patch traps the case when the essid is being set to its current value. If the essid is being set again and we are already associated, chances are some other parameters have also been altered. I think it is safer to do the re-association for this case. Signed-off-by: Bill Moss <bmoss@clemson.edu> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-29[PATCH] ipw2200: ipw_wx_set_essid fixZhu Yi
This patch cleanups the ipw_wx_set_essid code and forces a reassociation when setting the essid to "any". I have tested this patch with iwconfig. It makes ipw2200 compliant with all the cases mentioned in the iwconfig man page. The commands iwconfig iface essid any iwconfig iface essid -- any iwconfig iface essid off iwconfig iface essid on all seemed to work correctly. None of this worked before the patch. Note, this patch treats iwconfig iface essid iwconfig iface essid "" The same. It produces an error message: essid: Unknown host. Since an essid of "" is not mentioned in the iwconfig man page. Signed-off-by: Bill Moss <bmoss@clemson.edu> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-29[PATCH] ipw2200: SIOCGIWFREQ ioctl returns frequency rather than channelZhu Yi
The SIOCGIWFREQ ioctl fills the request structure's freq field by setting the exponent to 0 and the mantissa to the current channel number. The iwconfig tool works around this behaviour by looking up the frequency from the channel table if a frequency below 1kHz is returned, other tools (e.g. kwlaninfo) don't. According to the comment in the iwconfig source the driver is supposed to return the frequency, not the channel number. Signed-off-by: Ingo van Lil <inguin@gmx.de> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-29[PATCH] ipw2200: always enable frequently used debugging codeZhu Yi
Moving part of the debugging code from IPW_DEBUG to IPW_LL_DEBUG (low level debugging) and make IPW_DEBUG be always enabled. IPW_LL_DEBUG still needs to be enabled by selecting CONFIG_IPW2200_DEBUG. But it is highly deprecated for normal users since it adds higher debug verbosity in driver hot paths. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-29[PATCH] bcm43xx: return correct hard_start_xmit error codeLarry Finger
hard_start_xmit should return a NETIF_TX_FOO error code. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-Off-By: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-29[PATCH] bcm43xx: optimization of DMA bitfieldsLarry Finger
Convert the bitfields in the bcm43xx DMA code to properly aligned u8 booleans. These flags are accessed in the DMA hotpath, so it's a good idea to waste a few bytes of memory for the sake of speed by not requiring masking (and probably shifting) of the bitfields. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-Off-By: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-29[PATCH] orinoco: include linux/if_arp.h directlyPavel Roskin
Don't rely on linux/if_arp.h being included by other headers Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-29[PATCH] orinoco: Don't use "extern inline" on locking functionsPavel Roskin
SPARC architecture has been fixed, so it's no longer needed. Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-29[PATCH] bcm43xx: re-add bcm43xx_rng_init() callMichael Buesch
Calls to bcm43xx_rng_init() and bcm43xx_rng_exit() got lost due to merge trouble. Re-add them. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-29[PATCH] bcm43xx: >1G and 64bit DMA supportMichael Buesch
This is a rewrite of the bcm43xx DMA engine. It adds support for >1G of memory (for chips that support the extension bits) and 64-bit DMA (for chips that support it). Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-29[PATCH] kthread: airo.cSukadev Bhattiprolu
The airo driver is currently caching a pid for later use, but with the implementation of containers, pids themselves do not uniquely identify a task. The driver is also using kernel_thread() which is deprecated in drivers. This patch essentially replaces the kernel_thread() with kthread_create(). It also stores the task_struct of the airo_thread rather than its pid. Since this introduces a second task_struct in struct airo_info, the patch renames airo_info.task to airo_info.list_bss_task. As an extension of these changes, the patch further: - replaces kill_proc() with kthread_stop() - replaces signal_pending() with kthread_should_stop() - removes thread completion synchronisation which is handled by kthread_stop(). [akpm@osdl.org: fix races] Signed-off-by: Sukadev Bhattiprolu <sukadev@us.ibm.com> Cc: Javier Achirica <achirica@gmail.com> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-29Merge branch 'from-linus' into upstreamJohn W. Linville
2006-08-28e1000: Use module param array codeAuke Kok
Use module param array code to distinguish between defaults and user specified values. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-08-28e1000: remove unused part_num reading codeAuke Kok
Remove the code that reads part_num from the EEPROM. This part number is never displayed or queryable by the user. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-08-28e1000: error out if we cannot enable PCI device on resumeAuke Kok
Do not ignore errors returned by pci_enable_device, instead error out. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-08-28e1000: ring buffers resources cleanupVasily Averin
Memory leak was found in 2.6.18-rc4 and e1000 7.2.7 from sourceforge: We should free resources allocated for previous rings if following allocation fails. Signed-off-by: Vasily Averin <vvs@sw.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-08-28e1000: e1000_probe resources cleanupVasily Averin
Fix resources cleanup in e1000_probe() Signed-off-by: Vasily Averin <vvs@sw.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-08-28e1000: IRQ resources cleanupVasily Averin
irq leak was found in 2.6.18-rc4 and e1000 7.2.7 from sourceforge: if e1000_up fails in e1000_open() we do not free allocated irq Signed-off-by: Vasily Averin <vvs@sw.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-08-28e1000: Whitespace cleanup, cosmetic changesAuke Kok
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-08-24Merge branch 'upstream-fixes' of ↵Jeff Garzik
git://lost.foo-projects.org/~ahkok/git/netdev-2.6 into tmp
2006-08-24[PATCH] myri10ge: use multicast support in the firmwareBrice Goglin
Some recent myri10ge firmwares support multicast filtering as well as an extended mcp_irq_data structure (64 instead of 40 bytes). The new command MXGEFW_CMD_SET_STATS_DMA_V2 is used to check whether the firmware support those. mgp->fw_multicast_support is defined accordingly. When fw_multicast_support is set, some new multicast filtering commands is passed to the board in myri10ge_set_multicast_list(). Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-24[PATCH] myri10ge: use netif_msg_linkBrice Goglin
Add msg_enable and use netif_msg_link to enable/disable reporting of link status changes since some Ethernet switches seem to generate a lot of status changes under some circumstances and some people want to avoid useless flooding in the logs. Also add a counter for link status changes to statistics. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-24Merge branch 'upstream-fixes' into upstreamJeff Garzik
2006-08-24Merge branch 'upstream-fixes' of ↵Jeff Garzik
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream-fixes
2006-08-24[PATCH] spectrum_cs: Fix firmware uploading errorsRichard Purdie
spectrum_cs: Fix the logic so we error when the device is *not* present! This fixes firmware upload failures which prevent the driver from working (the bug is also present in 2.6.17). Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-24[PATCH] pcnet32: break in 2.6.18-rc1 identifiedDon Fry
A change I made for 2.6.17 and another for 2.6.18 do not work on older pcnet32 chips which I do not have access to. If the chip is a 79C970 or 79C965, do not try and suspend or check the link status. I have tested with a 79C970A, 79C971, 79C972, 79C973, 79C975, 79C976, and 79C978. Signed-off-by: Don Fry <brazilnut@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-24[PATCH] xirc2ps_cs: Cannot reset card in atomic contextJoerg Ahrens
I am using a Xircom CEM33 pcmcia NIC which has occasional hardware problems. If the netdev watchdog detects a transmit timeout, do_reset is called which msleeps - this is illegal in atomic context. This patch schedules the timeout handling as a workqueue item. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-24[PATCH] Signedness issue in drivers/net/3c515.cEric Sesterhenn
while playing with gcc 4.1 -Wextra warnings, I came across this one: drivers/net/3c515.c:1027: warning: comparison of unsigned expression >= 0 is always true Since i is unsigned the >= 0 check in the for loop is always true, so we might spin there forever unless the if condition triggers. Since i is only used in this loop, this patch changes it to an integer. Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-23Merge branch 'upstream-fixes' into upstreamJohn W. Linville
2006-08-23[PATCH] hostap: Restore antenna selection settings after port resetPavel Roskin
Intersil firmware 1.7.4 (and possibly others) loses the antenna selection settings when the port is reset. Signed-off-by: David Acker <dacker@roinet.com> Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-23[PATCH] spectrum_cs: Fix incorrect use of pcmcia_dev_present()Pavel Roskin
This bug was introduced during the PCMCIA API conversion and broke spectrum_cs completely. Tracked down by Fredrik Tolf <fredrik@dolda2000.com> Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-22Merge branch 'from-linus' into upstreamJohn W. Linville
2006-08-19[PATCH] network: axnet_cs.c: add new id (0x021b, 0x0202)Komuro
Signed-off-by: komurojun-mbn@nifty.com Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-19Merge branch 'upstream-fixes' into upstreamJeff Garzik
2006-08-19[PATCH] WAN: fix C101 card carrier handlingKrzysztof Halasa
Hi, One of my recent changes broke C101 carrier handling, this patch fixes it. Also fixes an old TX underrun checking bug. 2.6.18 material. Please apply. Thanks. Signed-off-by: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-19drivers/net: Remove deprecated use of pci_module_init()Jeff Garzik
From: Michal Piotrowski <michal.k.k.piotrowski@gmail.com> Signed-off-by: Michal Piotrowski <michal.k.k.piotrowski@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-19[PATCH] remove an unused function from the headerHenrik Kretzschmar
Removes an unused function from the via-velocity-driver. It doesn't make the binary smaller, but the source cleaner. Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-19Merge branch 'upstream' of ↵Jeff Garzik
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream
2006-08-19[PATCH] myri10ge: convert to netdev_alloc_skbBrice Goglin
Convert the myri10ge driver to use netdev_alloc_skb instead of dev_alloc_skb, which requires to propagate the net_device across several functions. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-19[PATCH] myri10ge: define some previously hardwired firmware constantsBrice Goglin
Define some previously hardwired firmware constants. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-19Merge branch 'upstream-fixes' into upstreamJeff Garzik
2006-08-19[PATCH] FS_ENET: use PAL for mii managementVitaly Bordug
This patch should update the fs_enet infrastructure to utilize Phy Abstraction Layer subsystem. Along with the above, there are apparent bugfixes, overhaul and improvements. Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-19[PATCH] PAL: Support of the fixed PHYVitaly Bordug
This makes it possible for HW PHY-less boards to utilize PAL goodies. Generic routines to connect to fixed PHY are provided, as well as ability to specify software callback that fills up link, speed, etc. information into PHY descriptor (the latter feature not tested so far). Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-19[PATCH] xircom_cb: wire up errors from pci_register_driver()Alexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Valerie Henson <val_henson@linux.intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-19[PATCH] skge: remember to run netif_poll_disable()Edgar E. Iglesias
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@axis.com> Cc: Stephen Hemminger <shemminger@osdl.org> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-19[PATCH] Add ethtool -g support to Spidernet network driverJim Lewis
Add ethtool -g (show ring sizes) support to the Spidernet network driver. Signed-off-by: James K Lewis <jklewis@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-19[PATCH] build fixes: smc91xDavid Brownell
Unclear how these bugs arrived, presumably from incorrect cleanup of the 16-bit-only paths, but smc91x wouldn't build for OMAP. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Nicolas Pitre <nico@cam.org> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-19[PATCH] via-rhine: add option avoid_D3 (work around broken BIOSes)Roger Luethi
It looks like broken BIOSes controlling Rhine chips will remain in use in significant numbers; such systems fail to come up via PXE after they have been put into D3 (power-saving) mode. This patch adds a module option for disabling the call that puts the chip to sleep. Signed-off-by: Roger Luethi <rl@hellgate.ch> Cc: Jeff Garzik <jgarzik@pobox.com> Cc: Joerg Bashir <brak@archive.org> Cc: Tim Phipps <tim@phipps-hutton.freeserve.co.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-04 22:59:43 +0000