summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2006-08-31e100: increment version to 3.5.16-k2Auke Kok
Increment the version of e100 to 3.5.16-k2, increment dates. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-08-31e100: remove skb->dev assignmentAuke Kok
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-08-31e100: fix error recoveryLinas Vepstas
A recent patch in -mm3 titled "gregkh-pci-pci-don-t-enable-device-if-already-enabled.patch" causes pci_enable_device() to be a no-op if the kernel thinks that the device is already enabled. This change breaks the PCI error recovery mechanism in the e100 device driver, since, after PCI slot reset, the card is no longer enabled. This is a trivial fix for this problem. Tested. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-08-31e100: Convert e100 to use netdev_alloc_skb().Auke Kok
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-08-31e1000: Increment driver version to 7.2.7-k2Auke Kok
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-08-31e1000: clean up skb allocation codeChristoph Hellwig
Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-08-31e1000: Add PCI ID 0x10a4 for our new 4-port PCI-Express deviceJesse Brandeburg
Device 0x10a4 is a double 82571 on a single PCI-Express card and has 4 gigabit capable ports. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-08-31e1000: unify WoL capability detection codeJesse Brandeburg
WoL is constantly giving problems and needed a rewrite. Consolidates all WoL capabilities into a single function, and disables WoL for all other ports on the device except for port A. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-08-318139cp: use PCI_DEVICE() to shorten the PCI device tableFrancois Romieu
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2006-08-318139cp: pci_get_drvdata(pdev) can not be NULL in suspend handlerFrançois Romieu
1) pci_set_drvdata() is used in cp_{init/remove}_one to initialize/reset driver_data to the relevant value (resp. net_device * and NULL). 2) each of the 3 relevant functions is issued under (device *)->sem: 2.1) pci_unregister_driver -> driver_unregister -> bus_remove_driver -> driver_detach (takes (device *)->sem) -> __device_release_driver(dev) -> dev->bus-remove(dev) (== pci_device_remove) -> drv->remove(pdev) (== cp_remove_one) [...] pci_dev->driver = NULL; 2.2) pci_register_driver -> __pci_register_driver -> driver_register -> bus_add_driver -> driver_attach -> __driver_attach (takes (device *)->sem) -> driver_probe_device(drv, dev) -> dev->bus->probe(dev) (== pci_device_probe) -> _pci_device_probe(drv, pci_dev) -> pci_call_probe(drv, pci_dev, id) -> drv->probe(dev, id) (== cp_init_one) [...] pci_dev->driver = drv; 2.3) suspend_device (takes (device *)->sem) -> dev->bus->suspend(dev) (== pci_device_suspend) checking for drv = pci_dev->driver != NULL [...] -> drv->suspend(pci_dev, state) (== cp_suspend) dev->sem and the state of pci_dev->driver provide the expected result. St Mary's day was a bit rainy here. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2006-08-318139cp: removal of useless BUG_ON() checkFrancois Romieu
netdev_priv() will provide a nice oops a few lines before the BUG_ON() check. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2006-08-318139cp: sync the device private data with its r8169 counterpartFrancois Romieu
struct cp_private is reorganized to be more easily compared between the r8169 and the 8139cp drivers. The alignment should not be impacted. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2006-08-318139cp: ring_info removal for the receive pathFrancois Romieu
The ring_info.len field is not used at all. cp_private.rx_skb is turned into an array of sk_buff *. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2006-08-318139cp: remove gratuitous indirectionFrancois Romieu
dev is an argument of the current function. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2006-08-318139cp: trim ring_infoFrancois Romieu
Fat removal: the mapping address is available from the Rx/Tx descriptors. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2006-08-31r8169: the 0x8136 needs a 8 bytes alignmentFrancois Romieu
Reported by Darren Salt. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2006-08-31r8169: add basic MII ioctl supportFrancois Romieu
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2006-08-31r8169: use standard #defines from mii.h instead of declaring private onesFrancois Romieu
Some unused stuff goes away btw. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2006-08-31r8169: trim trailing whitespaces and convert whitespaces to tabsFrancois Romieu
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2006-08-31r8169: udelay() removalFrancois Romieu
No need to chew CPU cycles as there is no heavy timing requirement and the delays are always requested from a sleepable context. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2006-08-31r8169: use NETDEV_TX_{BUSY/OK}Francois Romieu
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2006-08-31Merge branch 'merge'Paul Mackerras
2006-08-30Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SUNLANCE]: Fix probing problem. [SPARC64]: Fix X server hangs due to large pages.
2006-08-29[SUNLANCE]: Fix probing problem.Krzysztof Helt
The current probe table causes ledma and lebuffer "le" devices to get probed twice which is not what we want. Match just "le" and look directly at the parent to get the correct top-level node information. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-08-29[STRIP]: Fix neighbour table refcount leak.Stephen Hemminger
Found by inspection. The STRIP driver does neigh_lookup() but never releases. This driver shouldn't being doing gratuitous arp anyway. Untested, obviously, because of lack of hardware. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-08-29[E100]: Add module option to ignore bad EEPROM checksums.David S. Miller
Several people run into the situation where the E100 EEPROM contents are fine, but the checksum hasn't been set properly. This renders the device useless for them even though it would function correctly. The default is off, which retains the current behavior. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-08-29[PATCH] skge: version 1.7Stephen Hemminger
Increase version. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-29[PATCH] skge: use ethX for irq assigmentsStephen Hemminger
The user level irq balance daemon uses "eth" as a way to distinquish ethernet devices. Also, by using device name it is possible to distinquish different boards. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-29[PATCH] skge: use dev_alloc_skbStephen Hemminger
To avoid problems with buggy protocols that assume extra header space, use dev_alloc_skb() when allocating receive buffers. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-29[PATCH] skge: pci bus post fixesStephen Hemminger
At the end of a critical section, we need to force the PCI write to complete by doing a read. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-29[PATCH] skge: cleanup suspend/resume codeStephen Hemminger
The code for suspend/resume needs several fixes. The hardware lock should be setup in probe only, not in resume. Interrupts should be disabled during suspend, etc. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-29[PATCH] sky2: version 1.7shemminger@osdl.org
Change version number for this bundle. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-29[PATCH] sky2: pci post bugshemminger@osdl.org
Make sure that PCI write occurs before the delay. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-29[PATCH] sky2: power down PHY when not upshemminger@osdl.org
To save power, don't enable power to the PHY until device is brought up. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-29[PATCH] sky2: optimize checksum offload informationshemminger@osdl.org
Since many packets have the same checksum starting offset and insertion location; the driver can save the last information and only tell hardware when it changes. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-29[PATCH] sky2: TSO mss optimizationshemminger@osdl.org
The MSS in the transmit engine only has to change if TSO mtu changes. This means less commands to the chip when mixing TSO and regular data. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-29[PATCH] sky2: MSI test timingshemminger@osdl.org
The test for MSI IRQ could have timing issues. The PCI write needs to be pushed out before waiting, and the wait queue should be initialized before the IRQ. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-29[PATCH] sky2: dont use force status bitshemminger@osdl.org
Don't use force status bit. It was never implemented on all chips, or has no impact. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-29[PATCH] sky2: use netdev_alloc_skbshemminger@osdl.org
Use netdev_alloc_skb for buffer allocation to allow for headroom. This prevents bugs in code paths that assume extra space at the front and makes sky2 behave like other drivers. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-29[PATCH] sky2: remove cloned/pskb_expand_head checkshemminger@osdl.org
The code to handle cloned skb overwriting is unnecessary in the sky2 driver and is buggy. The bug is that pskb_expand_head can change the skb but the driver has already mapped in the header. Since the sky2 hardware doesn't need to overwrite memory, the buggy code can just be removed; it was mistakenly copied from the tg3 driver. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-29[PATCH] bcm43xx: Set floor of wireless signal and noise at -110 dBmLarry Finger
This patch sets the floor of wireless level (signal) and noise at -110 dBm, which makes them be comatible with RCPI, as discussed by Simon Barber. With this change, bcm43xx-softmac and bcm43xx-d80211 behave the same. Signed-Off-By: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-29[PATCH] bcm43xx - set correct value in mac_suspended for ifdown/ifup sequenceLarry Finger
When bcm43xx-softmac is given an ifdown/ifup sequence, the value for bcm->mac_suspended ends up wrong, which leads to a large number of assert(bcm->mac_suspended>=0) messages. This one-line patch fixes this problem. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-Off-By: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-29[PATCH] ipw2200: Fix compile error when CONFIG_IPW2200_DEBUG is not selectedZhu Yi
Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-29[PATCH] ipw2200: Update version stamp to 1.1.4Zhu Yi
Update version ipw2200 stamp to 1.1.4 Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-29[PATCH] ipw2200: enable wireless extension passive scanZhu Yi
This patch enables the ipw2200 driver to support passive scanning as offered by the wireless extensions. For this, I enhanced the ipw_wx_set_scan function in such a way that it differentiates between a passive and an active scan request. Additionally, I added a new function called ipw_request_passive_scan that is similiar to the ipw_request_scan function to perform passive scans. Last but not least, I added a field (in fact it is a work_struct struct) called request_passive_scan to the ipw_priv struct. Signed-off-by: Thomas King <king@informatik.uni-mannheim.de> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-29[PATCH] ipw2100: Fix deadlock detected by lockdepZhu Yi
Fix by removing dependency between priv->action_sem and rtnl semaphore. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-29[PATCH] ipw2200: Add pci .shutdown handlerZhu Yi
If we don't disable the card in the pci .shutdown method, there might be pending interrupts still in the interrupt line after a reboot on some platform. This patch fixes the problem by disable the hardware in the pci .shutdown method. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-29[PATCH] ipw2200: Fix kernel Oops if cmdlog debug is enabledZhu Yi
When command error log debug is enabled, we write every host command and parameters into a buffer. But we didn't alloc the parameter buffer for this case. The patch adds struct cmdlog_host_cmd so that the buffer is allocated from the stack. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-29[PATCH] ipw2200: mark "iwconfig retry 255" as invalidZhu Yi
The ipw2200 firmware/ucode only support values from 0 to 254. So mark 255 as invalid. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-29[PATCH] ipw2200: remove the MAC timestamp present field from radiotap headZhu Yi
IEEE80211_RADIOTAP_TSFT is defined as the Value in microseconds of the MAC's 64-bit 802.11 Time Synchronization Function timer when the first bit of the MPDU arrived at the MAC. Since ipw2200 hardware doesn't provide this value, we disable this feature from the radiotap header present flag. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-04 13:54:24 +0000