summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2008-04-16sc92031: use netdev_alloc_skbStephen Hemminger
Use netdev_alloc_skb since it handles any NUMA node memory localtion issues and sets skb->dev. Since device driver was not setting skb->dev, I bet filter rules based on device would not work. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-16sc92031: start transmit return value bugfixStephen Hemminger
Any negative return value from start_xmit is interpreted as NETDEV_TX_LOCK which is not what this driver wants. It should return 0 (NETDEV_TX_OK) when it consumes a packet. Also, use skb_padto() as the generic way to pad small frames. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-16sc92031: use net_device statsStephen Hemminger
Statistics structure is available for use in net_device structure. Compile tested only. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-16[netdrvr] tulip: Better MWI workaround for 21143 rev 65 chip errataPeter Horton
This patch works around the MWI bug on the DC21143 rev 65 Tulip by ensuring that the receive buffers don't end on a cache line boundary (as documented in the errata). This patch is required for the MIPS based Cobalt Qube/RaQ as supporting the extra PCI commands seems to reduce the chance of a hard lockup between the Tulip and the PCI bridge. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-16[netdrvr] tulip/winbond-840: don't let tulip.h symbol stomp oursJeff Garzik
winbond-840 shares tulip.h with the tulip driver, because they share many (but not all) of the same register definitions. This is useful for the register definitions, but not helpful when it comes to symbols that are shared among the tulip driver's C modules, but not meant to be shared outside that one driver. Thus, PKT_BUF_SZ is a symbol internal to tulip, but it was intruding upon a similar symbol in winbond-840's namespace. This was not a problem as long as the two symbols had the same value, but upcoming patches result in differing symbol values. Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-16drivers/net/bonding/bond_main.c - remove unnecessary #defineJoe Perches
bond_main.c already #includes <linux/seq_file.h> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-16phy: Change mii_bus id field to a stringAndy Fleming
Having the id field be an int was making more complex bus topologies excessively difficult. For now, just convert it to a string, and change all instances of "bus->id = val" to snprintf(id, MII_BUS_ID_LEN, "%x", val). Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-16gianfar: Support NAPI for TX FramesDai Haruki
Poll the completed TX frames in gfar_poll(). This prevents the tx completion interrupt from interfering with processing of received frames. We also disable hardware rx coalescing when NAPI is enabled. Signed-off-by: Dai Haruki <dai.haruki@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-16spidernet: revise link status loggingIshizaki Kou
This patch revises the logging for link informations of spidernet. - The link down message is too verbose because auto-negotiation timeout occurs periodically while an ethernet cable is not connected. - We want to see the link result, and we think it should be displayed. Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Acked-by: Jens Osterkamp <jens@de.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-16spidernet: fix error interrupt handlingIshizaki Kou
In addition to the value of GHIINT0STS, spidernet interrupt handler should check the values of GHIINT1STS/GHIINT2STS registers at the beginning of spider_net_interrupt() so as not to drop error interrupts. GHIINT1STS/GHIINT2STS registers indicates some of erroneous conditions in spidernet, and a few bits of GHIINT0STS register reflects these conditions. But GHIINT0MSK masks these bits, so you should check these conditions by reading GHIINT1STS/GHIINT2STS registers directly. Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Acked-by: Jens Osterkamp <jens@de.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-16spidernet: change interrupt masksIshizaki Kou
This patch changes spidernet interrupt masks. - unmask GDAINVAINT. There is an operation to do by spidernet interrupt handler. - mask some interrupts. There are no operations in the interrupt handler. Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Acked-by: Jens Osterkamp <jens@de.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-16spidernet: increase auto-negotiation timeout to 5 secondsIshizaki Kou
This patch extends the timeout for spidernet auto-negotiation. Auto-negotiation often fails to finish in 2 seconds. Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Acked-by: Jens Osterkamp <jens@de.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-16spidernet: add missing initializationIshizaki Kou
This patch fixes initialization of "aneg_count" and "medium" fields in spider_net_card to make spidernet driver correctly sets "link status". Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Acked-by: Jens Osterkamp <jens@de.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-16tc35815: Whitespace cleanupAtsushi Nemoto
Cosmetic TAB/whitespace cleanups and some style cleanups. No functional changes. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-16tc35815: Use generic PHY layerAtsushi Nemoto
Convert the tc35815 driver to use the generic PHY layer in drivers/net/phy. Also rename 'boardtype' to 'chiptype' which hould be more appropriate. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-16tc35815: Use managed pci iomap helperAtsushi Nemoto
Use managed pci functions and kill unnecessary volatiles. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-16tc35815: Use netdev_priv()Atsushi Nemoto
Use netdev_priv() instead of dev->priv. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-16tc35815: Use print_mac() helperAtsushi Nemoto
Use print_mac() and DECLARE_MAC_BUF(). Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-16tc35815: Statistics cleanupAtsushi Nemoto
Use struct net_device_stats embedded in struct net_device. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-16mv643xx_eth: update copyrightLennert Buytenhek
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Reviewed-by: Tzachi Perelstein <tzachi@marvell.com> Signed-off-by: Dale Farnsworth <dale@farnsworth.org>
2008-04-16mv643xx_eth: only print banner onceLennert Buytenhek
When there are multiple mv643xx_eth silicon blocks in the system, don't print an initialisation message for each and every one of them. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Reviewed-by: Tzachi Perelstein <tzachi@marvell.com> Signed-off-by: Dale Farnsworth <dale@farnsworth.org>
2008-04-16mv643xx_eth: pass port identifier to register accessorsLennert Buytenhek
Pass a struct mv643xx_private * to the register accessor functions, as a preparation for having multiple mv643xx_eth silicon blocks. (Since this causes some 80 column straddling, and the mv_ prefix is useless anyway, rename mv_read to rdl and mv_write to wrl to compensate.) Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Reviewed-by: Tzachi Perelstein <tzachi@marvell.com> Signed-off-by: Dale Farnsworth <dale@farnsworth.org>
2008-04-16mv643xx_eth: report netdev name in all printksLennert Buytenhek
In error and warning printks, always report the netdevice name instead of the port index (the latter has no meaning when there are multiple mv643xx_eth silicon blocks in the system.) Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Reviewed-by: Tzachi Perelstein <tzachi@marvell.com> Signed-off-by: Dale Farnsworth <dale@farnsworth.org>
2008-04-16mv643xx_eth: identify ports by struct mv643xx_private *Lennert Buytenhek
Instead of identifying individual mv643xx ethernet ports by only their port number, identify them by their struct mv643xx_private *, as just a port number has no meaning when there are multiple mv643xx_eth silicon blocks in the system. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Reviewed-by: Tzachi Perelstein <tzachi@marvell.com> Signed-off-by: Dale Farnsworth <dale@farnsworth.org>
2008-04-16mv643xx_eth: various cleanupsLennert Buytenhek
- Remove unused MV643XX_DEFAULT_[RT]X_QUEUE_SIZE definitions. - Remove ETH_TARGET enum -- it isn't used anywhere in the driver, and isn't even valid for non-mv643xx chip models, as those use different MBUS target IDs. - Clean up comment and control flow in mv643xx_eth_change_mtu(). - Use mp->dev instead of mp->mii.dev in mv643xx_eth_tx_timeout_task(). - Make mv643xx_eth_free_tx_descs() static. - Remove overzealous NULL check in mv643xx_eth_start_xmit(). - Use symbolic NETDEV_TX_* constants in mv643xx_eth_start_xmit(). Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Reviewed-by: Tzachi Perelstein <tzachi@marvell.com> Signed-off-by: Dale Farnsworth <dale@farnsworth.org>
2008-04-16mv643xx_eth: mp->tx_desc_count needs spinlock protectionLennert Buytenhek
mv643xx_eth_start_xmit() should check mp->tx_desc_count only inside the mp->lock spinlock. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Reviewed-by: Tzachi Perelstein <tzachi@marvell.com> Signed-off-by: Dale Farnsworth <dale@farnsworth.org>
2008-04-17[POWERPC] properly declare onstack completion in iseries vethBenjamin Herrenschmidt
The iSeries veth driver uses an on-stack struct completion that it initializes using the COMPLETION_INITIALIZER instead of COMPLETION_INITIALIZER_ONSTACK macro, causing problems with lockdep. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-17Merge branch 'for-2.6.26' of ↵Paul Mackerras
master.kernel.org:/pub/scm/linux/kernel/git/olof/pasemi
2008-04-16ath5k: Misc fixes/cleanupsNick Kossifidis
*Handle MIB interrupts and pass low level stats to mac80211 *Add Power On Self Test function *Update to match recent dumps *Let RF2425 attach so we can further test it *Remove unused files regdom.c and regdom.h base.c Changes-licensed-under: 3-clause-BSD rest Changes-licensed-under: ISC Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-16ath5k: Add RF2425 initvalsNick Kossifidis
*Add RF2425 initvals (still no rx/tx) This was on my laptop for a long time so it has to go out even if it still doesn't work, i hope i'll get my hands on an eeepc so i can work this out. base.c Changes-licensed-under: 3-clause-BSD rest Changes-licensed-under: ISC Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-16iwlwifi: Use HW acceleration decryption by defaultEmmanuel Grumbach
This patch reverses the hw_crypto logic and makes HW crypto a default. Giving swcrypto=1 as parameter to the module disables HW crypto. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-16iwlwifi: fix unload warning and errorMohamed Abbas
This patch fix the error we get when unload the driver, No space for Tx. The cause of this problem is related to receiving late SW rfkill from rfkill subsystem during the driver teardown causing this error. Signed-off-by: Mohamed Abbas <mabbas@linux.intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-16iwlwifi: arrange max number of Tx queuesRon Rindjunsky
This patch increases the max possible number of Tx queues, but leaves current used number of queues as HW dependent Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-16iwlwifi: Fix TKIP update key and get_free_ucode_keyEmmanuel Grumbach
This patch fixes a bug in update_tkip_key: only one key needs to be allocated in uCode, every time it is updated, the old one will be overwritten Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-16iwlwifi: move rxon associated command to hcmdTomas Winkler
This patch run rxon associated command from hcmd handler Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-16iwlwifi: introduce host commands callbacksTomas Winkler
This patch adds place holder for host command handlers for supporting different implementations per HW Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-16iwlwifi: move HW device registrationRon Rindjunsky
This patch moves the HW device registration from the iwl-4965.c file, which implies a HW specific support, to a more general location. Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-16iwlwifi: move the creation of LQ host command to iwlcoreTomas Winkler
This patch moves creation of LQ host command to iwlcore from previous location in rate scaling. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-16iwlwifi: support different num of tx and rx antennasTomas Winkler
This patch adds infrastructure for supporting different number of tx and rx antennas Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-16iwlwifi: hw_setting cleanupTomas Winkler
1. This patch renames hw_setting to hw_params 2. Align names of the structure and variables 3. set_hw_params is called from libs_ops Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-16iwlwifi: remove the statistics workEmmanuel Grumbach
This patch does 3 things 1) It removes the statistics work. The request statistics command is sent in ASYNC mode in this flow, the mutex is uneeded, so the request statistics function can't go to sleep. No need for a workqueue anymore. 2) iwl4965_send_statistics_request has been renamed to iwl_send_statistics_request and moved to iwl-core.c 3) A request for statistics is sent in alive_notify, the makes the uCode sends statistics notification periodically starting from association. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-16b43: Add fastpath to b43_mac_suspend()Michael Buesch
This adds a fastpath for the common workloads to the MAC suspend flushing. In common workloads the FIFO flush will take between 100 and 200 microseconds. So we want to avoid calling msleep() in the common case, as it will waste over 800 microseconds + scheduler overhead. This fastpath will hit in workloads where only small chunks of data are transmitted (downloading a file) or when a TX rate bigger or equal to 24MBit/s is used when transmitting lots of stuff (iperf). So in the commonly used workloads it will basically always hit. In case the fastpath is not hit, there's no real performance or latency disadvantage from that. And yes, I measured this. So this is not one of these bad Programmer Likeliness Assumptions that are always wrong. ;) Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-16iwlwifi: move shared pointers to iwl_privTomas Winkler
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-16iwlwifi: perform bss_info_changed post association work right awayReinette Chatre
Do not use workqueue for bss_info_changed post association work. When driver is notified of association the upper layer will be notified right after that the association is complete. Doing the post association work in a workqueue introduces a race condition where the upper layer may want to make use of the association, but it is not yet complete. Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Acked-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-16iwlwifi: make Makefile more conciseReinette Chatre
Also change CONFIG_IWLCORE_RFKILL to CONFIG_IWLWIFI_RFKILL to be more consistent with other config variables. Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Acked-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-16iwl4965: make iwl4965_send_rxon_assoc asynchronousReinette Chatre
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Acked-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-16iwlwifi: Fix byte count table for fragmented packetsTomas Winkler
This patch fix byte count table update. Table must be updated for each fragment Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-16iwlwifi: moves security functions to iwl-sta.cEmmanuel Grumbach
This patch moves security related functions to iwl-sta.c. Note that iwl4965_mac_update_tkip_key is still in iwl4965-base.c since it is a mac80211 handler. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-16iwlwifi: maintain uCode key table stateEmmanuel Grumbach
This patch fix book keeping of key table in the driver to be synchronized with uCode Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-16iwlwifi: add 1X HW WEP supportEmmanuel Grumbach
This patch adds support for HW encryption/decryption in 1X WEP. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-04 07:57:47 +0000