summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2022-06-21ice: Fix switchdev rules book keepingWojciech Drewek
Adding two filters with same matching criteria ends up with one rule in hardware with act = ICE_FWD_TO_VSI_LIST. In order to remove them properly we have to keep the information about vsi handle which is used in VSI bitmap (ice_adv_fltr_mgmt_list_entry::vsi_list_info::vsi_map). Fixes: 0d08a441fb1a ("ice: ndo_setup_tc implementation for PF") Reported-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-06-21ice: ignore protocol field in GTP offloadMarcin Szycik
Commit 34a897758efe ("ice: Add support for inner etype in switchdev") added the ability to match on inner ethertype. A side effect of that change is that it is now impossible to add some filters for protocols which do not contain inner ethtype field. tc requires the protocol field to be specified when providing certain other options, e.g. src_ip. This is a problem in case of GTP - when user wants to specify e.g. src_ip, they also need to specify protocol in tc command (otherwise tc fails with: Illegal "src_ip"). Because GTP is a tunnel, the protocol field is treated as inner protocol. GTP does not contain inner ethtype field and the filter cannot be added. To fix this, ignore the ethertype field in case of GTP filters. Fixes: 9a225f81f540 ("ice: Support GTP-U and GTP-C offload in switchdev") Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-06-19net: phy: at803x: fix NULL pointer dereference on AR9331 PHYOleksij Rempel
Latest kernel will explode on the PHY interrupt config, since it depends now on allocated priv. So, run probe to allocate priv to fix it. ar9331_switch ethernet.1:10 lan0 (uninitialized): PHY [!ahb!ethernet@1a000000!mdio!switch@10:00] driver [Qualcomm Atheros AR9331 built-in PHY] (irq=13) CPU 0 Unable to handle kernel paging request at virtual address 0000000a, epc == 8050e8a8, ra == 80504b34 ... Call Trace: [<8050e8a8>] at803x_config_intr+0x5c/0xd0 [<80504b34>] phy_request_interrupt+0xa8/0xd0 [<8050289c>] phylink_bringup_phy+0x2d8/0x3ac [<80502b68>] phylink_fwnode_phy_connect+0x118/0x130 [<8074d8ec>] dsa_slave_create+0x270/0x420 [<80743b04>] dsa_port_setup+0x12c/0x148 [<8074580c>] dsa_register_switch+0xaf0/0xcc0 [<80511344>] ar9331_sw_probe+0x370/0x388 [<8050cb78>] mdio_probe+0x44/0x70 [<804df300>] really_probe+0x200/0x424 [<804df7b4>] __driver_probe_device+0x290/0x298 [<804df810>] driver_probe_device+0x54/0xe4 [<804dfd50>] __device_attach_driver+0xe4/0x130 [<804dcb00>] bus_for_each_drv+0xb4/0xd8 [<804dfac4>] __device_attach+0x104/0x1a4 [<804ddd24>] bus_probe_device+0x48/0xc4 [<804deb44>] deferred_probe_work_func+0xf0/0x10c [<800a0ffc>] process_one_work+0x314/0x4d4 [<800a17fc>] worker_thread+0x2a4/0x354 [<800a9a54>] kthread+0x134/0x13c [<8006306c>] ret_from_kernel_thread+0x14/0x1c Same Issue would affect some other PHYs (QCA8081, QCA9561), so fix it too. Fixes: 3265f4218878 ("net: phy: at803x: add fiber support") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-19drivers/net/ethernet/neterion/vxge: Fix a use-after-free bug in vxge-main.cWentao_Liang
The pointer vdev points to a memory region adjacent to a net_device structure ndev, which is a field of hldev. At line 4740, the invocation to vxge_device_unregister unregisters device hldev, and it also releases the memory region pointed by vdev->bar0. At line 4743, the freed memory region is referenced (i.e., iounmap(vdev->bar0)), resulting in a use-after-free vulnerability. We can fix the bug by calling iounmap before vxge_device_unregister. 4721. static void vxge_remove(struct pci_dev *pdev) 4722. { 4723. struct __vxge_hw_device *hldev; 4724. struct vxgedev *vdev; … 4731. vdev = netdev_priv(hldev->ndev); … 4740. vxge_device_unregister(hldev); 4741. /* Do not call pci_disable_sriov here, as it will break child devices */ 4742. vxge_hw_device_terminate(hldev); 4743. iounmap(vdev->bar0); … 4749 vxge_debug_init(vdev->level_trace, "%s:%d Device unregistered", 4750 __func__, __LINE__); 4751 vxge_debug_entryexit(vdev->level_trace, "%s:%d Exiting...", __func__, 4752 __LINE__); 4753. } This is the screenshot when the vulnerability is triggered by using KASAN. We can see that there is a use-after-free reported by KASAN. /***************************start**************************/ root@kernel:~# echo 1 > /sys/bus/pci/devices/0000:00:03.0/remove [ 178.296316] vxge_remove [ 182.057081] ================================================================== [ 182.057548] BUG: KASAN: use-after-free in vxge_remove+0xe0/0x15c [ 182.057760] Read of size 8 at addr ffff888006c76598 by task bash/119 [ 182.057983] [ 182.058747] CPU: 0 PID: 119 Comm: bash Not tainted 5.18.0 #5 [ 182.058919] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 182.059463] Call Trace: [ 182.059726] <TASK> [ 182.060017] dump_stack_lvl+0x34/0x44 [ 182.060316] print_report.cold+0xb2/0x6b7 [ 182.060401] ? kfree+0x89/0x290 [ 182.060478] ? vxge_remove+0xe0/0x15c [ 182.060545] kasan_report+0xa9/0x120 [ 182.060629] ? vxge_remove+0xe0/0x15c [ 182.060706] vxge_remove+0xe0/0x15c [ 182.060793] pci_device_remove+0x5d/0xe0 [ 182.060968] device_release_driver_internal+0xf1/0x180 [ 182.061063] pci_stop_bus_device+0xae/0xe0 [ 182.061150] pci_stop_and_remove_bus_device_locked+0x11/0x20 [ 182.061236] remove_store+0xc6/0xe0 [ 182.061297] ? subordinate_bus_number_show+0xc0/0xc0 [ 182.061359] ? __mutex_lock_slowpath+0x10/0x10 [ 182.061438] ? sysfs_kf_write+0x6d/0xa0 [ 182.061525] kernfs_fop_write_iter+0x1b0/0x260 [ 182.061610] ? sysfs_kf_bin_read+0xf0/0xf0 [ 182.061695] new_sync_write+0x209/0x310 [ 182.061789] ? new_sync_read+0x310/0x310 [ 182.061865] ? cgroup_rstat_updated+0x5c/0x170 [ 182.061937] ? preempt_count_sub+0xf/0xb0 [ 182.061995] ? pick_next_entity+0x13a/0x220 [ 182.062063] ? __inode_security_revalidate+0x44/0x80 [ 182.062155] ? security_file_permission+0x46/0x2a0 [ 182.062230] vfs_write+0x33f/0x3e0 [ 182.062303] ksys_write+0xb4/0x150 [ 182.062369] ? __ia32_sys_read+0x40/0x40 [ 182.062451] do_syscall_64+0x3b/0x90 [ 182.062531] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 182.062894] RIP: 0033:0x7f3f37d17274 [ 182.063558] Code: 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b3 0f 1f 80 00 00 00 00 48 8d 05 89 54 0d 00 8b 00 85 c0 75 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 41 54 49 89 d4 55 48 89 f5 53 [ 182.063797] RSP: 002b:00007ffd5ba9e178 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 182.064117] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f3f37d17274 [ 182.064219] RDX: 0000000000000002 RSI: 000055bbec327180 RDI: 0000000000000001 [ 182.064315] RBP: 000055bbec327180 R08: 000000000000000a R09: 00007f3f37de7cf0 [ 182.064414] R10: 000000000000000a R11: 0000000000000246 R12: 00007f3f37de8760 [ 182.064513] R13: 0000000000000002 R14: 00007f3f37de3760 R15: 0000000000000002 [ 182.064691] </TASK> [ 182.064916] [ 182.065224] The buggy address belongs to the physical page: [ 182.065804] page:00000000ef31e4f4 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x6c76 [ 182.067419] flags: 0x100000000000000(node=0|zone=1) [ 182.068997] raw: 0100000000000000 0000000000000000 ffffea00001b1d88 0000000000000000 [ 182.069118] raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 [ 182.069294] page dumped because: kasan: bad access detected [ 182.069331] [ 182.069360] Memory state around the buggy address: [ 182.070006] ffff888006c76480: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 182.070136] ffff888006c76500: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 182.070230] >ffff888006c76580: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 182.070305] ^ [ 182.070456] ffff888006c76600: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 182.070505] ffff888006c76680: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 182.070606] ================================================================== [ 182.071374] Disabling lock debugging due to kernel taint /*****************************end*****************************/ After fixing the bug as done in the patch, we can find KASAN do not report the bug and the device(00:03.0) has been successfully removed. /*****************************start***************************/ root@kernel:~# echo 1 > /sys/bus/pci/devices/0000:00:03.0/remove root@kernel:~# /******************************end****************************/ Signed-off-by: Wentao_Liang <Wentao_Liang_g@163.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-17bonding: ARP monitor spams NETDEV_NOTIFY_PEERS notifiersJay Vosburgh
The bonding ARP monitor fails to decrement send_peer_notif, the number of peer notifications (gratuitous ARP or ND) to be sent. This results in a continuous series of notifications. Correct this by decrementing the counter for each notification. Reported-by: Jonathan Toppins <jtoppins@redhat.com> Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com> Fixes: b0929915e035 ("bonding: Fix RTNL: assertion failed at net/core/rtnetlink.c for ab arp monitor") Link: https://lore.kernel.org/netdev/b2fd4147-8f50-bebd-963a-1a3e8d1d9715@redhat.com/ Tested-by: Jonathan Toppins <jtoppins@redhat.com> Reviewed-by: Jonathan Toppins <jtoppins@redhat.com> Link: https://lore.kernel.org/r/9400.1655407960@famine Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-17igb: fix a use-after-free issue in igb_clean_tx_ringLorenzo Bianconi
Fix the following use-after-free bug in igb_clean_tx_ring routine when the NIC is running in XDP mode. The issue can be triggered redirecting traffic into the igb NIC and then closing the device while the traffic is flowing. [ 73.322719] CPU: 1 PID: 487 Comm: xdp_redirect Not tainted 5.18.3-apu2 #9 [ 73.330639] Hardware name: PC Engines APU2/APU2, BIOS 4.0.7 02/28/2017 [ 73.337434] RIP: 0010:refcount_warn_saturate+0xa7/0xf0 [ 73.362283] RSP: 0018:ffffc9000081f798 EFLAGS: 00010282 [ 73.367761] RAX: 0000000000000000 RBX: ffffc90000420f80 RCX: 0000000000000000 [ 73.375200] RDX: ffff88811ad22d00 RSI: ffff88811ad171e0 RDI: ffff88811ad171e0 [ 73.382590] RBP: 0000000000000900 R08: ffffffff82298f28 R09: 0000000000000058 [ 73.390008] R10: 0000000000000219 R11: ffffffff82280f40 R12: 0000000000000090 [ 73.397356] R13: ffff888102343a40 R14: ffff88810359e0e4 R15: 0000000000000000 [ 73.404806] FS: 00007ff38d31d740(0000) GS:ffff88811ad00000(0000) knlGS:0000000000000000 [ 73.413129] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 73.419096] CR2: 000055cff35f13f8 CR3: 0000000106391000 CR4: 00000000000406e0 [ 73.426565] Call Trace: [ 73.429087] <TASK> [ 73.431314] igb_clean_tx_ring+0x43/0x140 [igb] [ 73.436002] igb_down+0x1d7/0x220 [igb] [ 73.439974] __igb_close+0x3c/0x120 [igb] [ 73.444118] igb_xdp+0x10c/0x150 [igb] [ 73.447983] ? igb_pci_sriov_configure+0x70/0x70 [igb] [ 73.453362] dev_xdp_install+0xda/0x110 [ 73.457371] dev_xdp_attach+0x1da/0x550 [ 73.461369] do_setlink+0xfd0/0x10f0 [ 73.465166] ? __nla_validate_parse+0x89/0xc70 [ 73.469714] rtnl_setlink+0x11a/0x1e0 [ 73.473547] rtnetlink_rcv_msg+0x145/0x3d0 [ 73.477709] ? rtnl_calcit.isra.0+0x130/0x130 [ 73.482258] netlink_rcv_skb+0x8d/0x110 [ 73.486229] netlink_unicast+0x230/0x340 [ 73.490317] netlink_sendmsg+0x215/0x470 [ 73.494395] __sys_sendto+0x179/0x190 [ 73.498268] ? move_addr_to_user+0x37/0x70 [ 73.502547] ? __sys_getsockname+0x84/0xe0 [ 73.506853] ? netlink_setsockopt+0x1c1/0x4a0 [ 73.511349] ? __sys_setsockopt+0xc8/0x1d0 [ 73.515636] __x64_sys_sendto+0x20/0x30 [ 73.519603] do_syscall_64+0x3b/0x80 [ 73.523399] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 73.528712] RIP: 0033:0x7ff38d41f20c [ 73.551866] RSP: 002b:00007fff3b945a68 EFLAGS: 00000246 ORIG_RAX: 000000000000002c [ 73.559640] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007ff38d41f20c [ 73.567066] RDX: 0000000000000034 RSI: 00007fff3b945b30 RDI: 0000000000000003 [ 73.574457] RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000000 [ 73.581852] R10: 0000000000000000 R11: 0000000000000246 R12: 00007fff3b945ab0 [ 73.589179] R13: 0000000000000000 R14: 0000000000000003 R15: 00007fff3b945b30 [ 73.596545] </TASK> [ 73.598842] ---[ end trace 0000000000000000 ]--- Fixes: 9cbc948b5a20c ("igb: add XDP support") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Link: https://lore.kernel.org/r/e5c01d549dc37bff18e46aeabd6fb28a7bcf84be.1655388571.git.lorenzo@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-17hamradio: 6pack: fix array-index-out-of-bounds in decode_std_command()Xu Jia
Hulk Robot reports incorrect sp->rx_count_cooked value in decode_std_command(). This should be caused by the subtracting from sp->rx_count_cooked before. It seems that sp->rx_count_cooked value is changed to 0, which bypassed the previous judgment. The situation is shown below: (Thread 1) | (Thread 2) decode_std_command() | resync_tnc() ... | if (rest == 2) | sp->rx_count_cooked -= 2; | else if (rest == 3) | ... | sp->rx_count_cooked = 0; sp->rx_count_cooked -= 1; | for (i = 0; i < sp->rx_count_cooked; i++) // report error checksum += sp->cooked_buf[i]; sp->rx_count_cooked is a shared variable but is not protected by a lock. The same applies to sp->rx_count. This patch adds a lock to fix the bug. The fail log is shown below: ======================================================================= UBSAN: array-index-out-of-bounds in drivers/net/hamradio/6pack.c:925:31 index 400 is out of range for type 'unsigned char [400]' CPU: 3 PID: 7433 Comm: kworker/u10:1 Not tainted 5.18.0-rc5-00163-g4b97bac0756a #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 Workqueue: events_unbound flush_to_ldisc Call Trace: <TASK> dump_stack_lvl+0xcd/0x134 ubsan_epilogue+0xb/0x50 __ubsan_handle_out_of_bounds.cold+0x62/0x6c sixpack_receive_buf+0xfda/0x1330 tty_ldisc_receive_buf+0x13e/0x180 tty_port_default_receive_buf+0x6d/0xa0 flush_to_ldisc+0x213/0x3f0 process_one_work+0x98f/0x1620 worker_thread+0x665/0x1080 kthread+0x2e9/0x3a0 ret_from_fork+0x1f/0x30 ... Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Xu Jia <xujia39@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-17veth: Add updating of trans_startJay Vosburgh
Since commit 21a75f0915dd ("bonding: Fix ARP monitor validation"), the bonding ARP / ND link monitors depend on the trans_start time to determine link availability. NETIF_F_LLTX drivers must update trans_start directly, which veth does not do. This prevents use of the ARP or ND link monitors with veth interfaces in a bond. Resolve this by having veth_xmit update the trans_start time. Reported-by: Jonathan Toppins <jtoppins@redhat.com> Tested-by: Jonathan Toppins <jtoppins@redhat.com> Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com> Fixes: 21a75f0915dd ("bonding: Fix ARP monitor validation") Link: https://lore.kernel.org/netdev/b2fd4147-8f50-bebd-963a-1a3e8d1d9715@redhat.com/ Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-16phy: aquantia: Fix AN when higher speeds than 1G are not advertisedClaudiu Manoil
Even when the eth port is resticted to work with speeds not higher than 1G, and so the eth driver is requesting the phy (via phylink) to advertise up to 1000BASET support, the aquantia phy device is still advertising for 2.5G and 5G speeds. Clear these advertising defaults when requested. Cc: Ondrej Spacek <ondrej.spacek@nxp.com> Fixes: 09c4c57f7bc41 ("net: phy: aquantia: add support for auto-negotiation configuration") Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Link: https://lore.kernel.org/r/20220610084037.7625-1-claudiu.manoil@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-16net: axienet: add missing error return code in axienet_probe()Yang Yingliang
It should return error code in error path in axienet_probe(). Fixes: 00be43a74ca2 ("net: axienet: make the 64b addresable DMA depends on 64b archectures") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20220616062917.3601-1-yangyingliang@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-15net: usb: ax88179_178a needs FLAG_SEND_ZLPJose Alonso
The extra byte inserted by usbnet.c when (length % dev->maxpacket == 0) is causing problems to device. This patch sets FLAG_SEND_ZLP to avoid this. Tested with: 0b95:1790 ASIX Electronics Corp. AX88179 Gigabit Ethernet Problems observed: ====================================================================== 1) Using ssh/sshfs. The remote sshd daemon can abort with the message: "message authentication code incorrect" This happens because the tcp message sent is corrupted during the USB "Bulk out". The device calculate the tcp checksum and send a valid tcp message to the remote sshd. Then the encryption detects the error and aborts. 2) NETDEV WATCHDOG: ... (ax88179_178a): transmit queue 0 timed out 3) Stop normal work without any log message. The "Bulk in" continue receiving packets normally. The host sends "Bulk out" and the device responds with -ECONNRESET. (The netusb.c code tx_complete ignore -ECONNRESET) Under normal conditions these errors take days to happen and in intense usage take hours. A test with ping gives packet loss, showing that something is wrong: ping -4 -s 462 {destination} # 462 = 512 - 42 - 8 Not all packets fail. My guess is that the device tries to find another packet starting at the extra byte and will fail or not depending on the next bytes (old buffer content). ====================================================================== Signed-off-by: Jose Alonso <joalonsof@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-15Merge branch '100GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-06-14 This series contains updates to ice driver only. Michal fixes incorrect Tx timestamp offset calculation for E822 devices. Roman enforces required VLAN filtering settings for double VLAN mode. Przemyslaw fixes memory corruption issues with VFs by ensuring queues are disabled in the error path of VF queue configuration and to disabled VFs during reset. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-14net: bgmac: Fix an erroneous kfree() in bgmac_remove()Christophe JAILLET
'bgmac' is part of a managed resource allocated with bgmac_alloc(). It should not be freed explicitly. Remove the erroneous kfree() from the .remove() function. Fixes: 34a5102c3235 ("net: bgmac: allocate struct bgmac just once & don't copy it") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/a026153108dd21239036a032b95c25b5cece253b.1655153616.git.christophe.jaillet@wanadoo.fr Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-14ice: Fix memory corruption in VF driverPrzemyslaw Patynowski
Disable VF's RX/TX queues, when it's disabled. VF can have queues enabled, when it requests a reset. If PF driver assumes that VF is disabled, while VF still has queues configured, VF may unmap DMA resources. In such scenario device still can map packets to memory, which ends up silently corrupting it. Previously, VF driver could experience memory corruption, which lead to crash: [ 5119.170157] BUG: unable to handle kernel paging request at 00001b9780003237 [ 5119.170166] PGD 0 P4D 0 [ 5119.170173] Oops: 0002 [#1] PREEMPT_RT SMP PTI [ 5119.170181] CPU: 30 PID: 427592 Comm: kworker/u96:2 Kdump: loaded Tainted: G W I --------- - - 4.18.0-372.9.1.rt7.166.el8.x86_64 #1 [ 5119.170189] Hardware name: Dell Inc. PowerEdge R740/014X06, BIOS 2.3.10 08/15/2019 [ 5119.170193] Workqueue: iavf iavf_adminq_task [iavf] [ 5119.170219] RIP: 0010:__page_frag_cache_drain+0x5/0x30 [ 5119.170238] Code: 0f 0f b6 77 51 85 f6 74 07 31 d2 e9 05 df ff ff e9 90 fe ff ff 48 8b 05 49 db 33 01 eb b4 0f 1f 80 00 00 00 00 0f 1f 44 00 00 <f0> 29 77 34 74 01 c3 48 8b 07 f6 c4 80 74 0f 0f b6 77 51 85 f6 74 [ 5119.170244] RSP: 0018:ffffa43b0bdcfd78 EFLAGS: 00010282 [ 5119.170250] RAX: ffffffff896b3e40 RBX: ffff8fb282524000 RCX: 0000000000000002 [ 5119.170254] RDX: 0000000049000000 RSI: 0000000000000000 RDI: 00001b9780003203 [ 5119.170259] RBP: ffff8fb248217b00 R08: 0000000000000022 R09: 0000000000000009 [ 5119.170262] R10: 2b849d6300000000 R11: 0000000000000020 R12: 0000000000000000 [ 5119.170265] R13: 0000000000001000 R14: 0000000000000009 R15: 0000000000000000 [ 5119.170269] FS: 0000000000000000(0000) GS:ffff8fb1201c0000(0000) knlGS:0000000000000000 [ 5119.170274] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 5119.170279] CR2: 00001b9780003237 CR3: 00000008f3e1a003 CR4: 00000000007726e0 [ 5119.170283] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 5119.170286] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 5119.170290] PKRU: 55555554 [ 5119.170292] Call Trace: [ 5119.170298] iavf_clean_rx_ring+0xad/0x110 [iavf] [ 5119.170324] iavf_free_rx_resources+0xe/0x50 [iavf] [ 5119.170342] iavf_free_all_rx_resources.part.51+0x30/0x40 [iavf] [ 5119.170358] iavf_virtchnl_completion+0xd8a/0x15b0 [iavf] [ 5119.170377] ? iavf_clean_arq_element+0x210/0x280 [iavf] [ 5119.170397] iavf_adminq_task+0x126/0x2e0 [iavf] [ 5119.170416] process_one_work+0x18f/0x420 [ 5119.170429] worker_thread+0x30/0x370 [ 5119.170437] ? process_one_work+0x420/0x420 [ 5119.170445] kthread+0x151/0x170 [ 5119.170452] ? set_kthread_struct+0x40/0x40 [ 5119.170460] ret_from_fork+0x35/0x40 [ 5119.170477] Modules linked in: iavf sctp ip6_udp_tunnel udp_tunnel mlx4_en mlx4_core nfp tls vhost_net vhost vhost_iotlb tap tun xt_CHECKSUM ipt_MASQUERADE xt_conntrack ipt_REJECT nf_reject_ipv4 nft_compat nft_counter nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables nfnetlink bridge stp llc rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache sunrpc intel_rapl_msr iTCO_wdt iTCO_vendor_support dell_smbios wmi_bmof dell_wmi_descriptor dcdbas kvm_intel kvm irqbypass intel_rapl_common isst_if_common skx_edac irdma nfit libnvdimm x86_pkg_temp_thermal i40e intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel ib_uverbs rapl ipmi_ssif intel_cstate intel_uncore mei_me pcspkr acpi_ipmi ib_core mei lpc_ich i2c_i801 ipmi_si ipmi_devintf wmi ipmi_msghandler acpi_power_meter xfs libcrc32c sd_mod t10_pi sg mgag200 drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ice ahci drm libahci crc32c_intel libata tg3 megaraid_sas [ 5119.170613] i2c_algo_bit dm_mirror dm_region_hash dm_log dm_mod fuse [last unloaded: iavf] [ 5119.170627] CR2: 00001b9780003237 Fixes: ec4f5a436bdf ("ice: Check if VF is disabled for Opcode and other operations") Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Co-developed-by: Slawomir Laba <slawomirx.laba@intel.com> Signed-off-by: Slawomir Laba <slawomirx.laba@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-06-14ice: Fix queue config fail handlingPrzemyslaw Patynowski
Disable VF's RX/TX queues, when VIRTCHNL_OP_CONFIG_VSI_QUEUES fail. Not disabling them might lead to scenario, where PF driver leaves VF queues enabled, when VF's VSI failed queue config. In this scenario VF should not have RX/TX queues enabled. If PF failed to set up VF's queues, VF will reset due to TX timeouts in VF driver. Initialize iterator 'i' to -1, so if error happens prior to configuring queues then error path code will not disable queue 0. Loop that configures queues will is using same iterator, so error path code will only disable queues that were configured. Fixes: 77ca27c41705 ("ice: add support for virtchnl_queue_select.[tx|rx]_queues bitmap") Suggested-by: Slawomir Laba <slawomirx.laba@intel.com> Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-06-14ice: Sync VLAN filtering features for DVMRoman Storozhenko
VLAN filtering features, that is C-Tag and S-Tag, in DVM mode must be both enabled or disabled. In case of turning off/on only one of the features, another feature must be turned off/on automatically with issuing an appropriate message to the kernel log. Fixes: 1babaf77f49d ("ice: Advertise 802.1ad VLAN filtering and offloads for PF netdev") Signed-off-by: Roman Storozhenko <roman.storozhenko@intel.com> Co-developed-by: Anatolii Gerasymenko <anatolii.gerasymenko@intel.com> Signed-off-by: Anatolii Gerasymenko <anatolii.gerasymenko@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-06-14ice: Fix PTP TX timestamp offset calculationMichal Michalik
The offset was being incorrectly calculated for E822 - that led to collisions in choosing TX timestamp register location when more than one port was trying to use timestamping mechanism. In E822 one quad is being logically split between ports, so quad 0 is having trackers for ports 0-3, quad 1 ports 4-7 etc. Each port should have separate memory location for tracking timestamps. Due to error for example ports 1 and 2 had been assigned to quad 0 with same offset (0), while port 1 should have offset 0 and 1 offset 16. Fix it by correctly calculating quad offset. Fixes: 3a7496234d17 ("ice: implement basic E822 PTP support") Signed-off-by: Michal Michalik <michal.michalik@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-06-14mlxsw: spectrum_cnt: Reorder counter poolsPetr Machata
Both RIF and ACL flow counters use a 24-bit SW-managed counter address to communicate which counter they want to bind. In a number of Spectrum FW releases, binding a RIF counter is broken and slices the counter index to 16 bits. As a result, on Spectrum-2 and above, no more than about 410 RIF counters can be effectively used. This translates to 205 netdevices for which L3 HW stats can be enabled. (This does not happen on Spectrum-1, because there are fewer counters available overall and the counter index never exceeds 16 bits.) Binding counters to ACLs does not have this issue. Therefore reorder the counter allocation scheme so that RIF counters come first and therefore get lower indices that are below the 16-bit barrier. Fixes: 98e60dce4da1 ("Merge branch 'mlxsw-Introduce-initial-Spectrum-2-support'") Reported-by: Maksym Yaremchuk <maksymy@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Link: https://lore.kernel.org/r/20220613125017.2018162-1-idosch@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-06-13amd-xgbe: Use platform_irq_count()Jean-Philippe Brucker
The AMD XGbE driver currently counts the number of interrupts assigned to the device by inspecting the pdev->resource array. Since commit a1a2b7125e10 ("of/platform: Drop static setup of IRQ resource from DT core") removed IRQs from this array, the driver now attempts to get all interrupts from 1 to -1U and gives up probing once it reaches an invalid interrupt index. Obtain the number of IRQs with platform_irq_count() instead. Fixes: a1a2b7125e10 ("of/platform: Drop static setup of IRQ resource from DT core") Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Link: https://lore.kernel.org/r/20220609161457.69614-1-jean-philippe@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-13octeontx2-vf: Add support for adaptive interrupt coalescingSuman Ghosh
Fixes: 6e144b47f560 (octeontx2-pf: Add support for adaptive interrupt coalescing) Added support for VF interfaces as well. Signed-off-by: Suman Ghosh <sumang@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-13xilinx: Fix build on x86.David S. Miller
CONFIG_64BIT is not sufficient for checking for availability of iowrite64() and friends. Also, the out_addr helpers need to be inline. Fixes: b690f8df6497 ("net: axienet: Use iowrite64 to write all 64b descriptor pointers") Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-13net: axienet: Use iowrite64 to write all 64b descriptor pointersAndy Chiu
According to commit f735c40ed93c ("net: axienet: Autodetect 64-bit DMA capability") and AXI-DMA spec (pg021), on 64-bit capable dma, only writing MSB part of tail descriptor pointer causes DMA engine to start fetching descriptors. However, we found that it is true only if dma is in idle state. In other words, dma would use a tailp even if it only has LSB updated, when the dma is running. The non-atomicity of this behavior could be problematic if enough delay were introduced in between the 2 writes. For example, if an interrupt comes right after the LSB write and the cpu spends long enough time in the handler for the dma to get back into idle state by completing descriptors, then the seconcd write to MSB would treat dma to start fetching descriptors again. Since the descriptor next to the one pointed by current tail pointer is not filled by the kernel yet, fetching a null descriptor here causes a dma internal error and halt the dma engine down. We suggest that the dma engine should start process a 64-bit MMIO write to the descriptor pointer only if ONE 32-bit part of it is written on all states. Or we should restrict the use of 64-bit addressable dma on 32-bit platforms, since those devices have no instruction to guarantee the write to LSB and MSB part of tail pointer occurs atomically to the dma. initial condition: curp = x-3; tailp = x-2; LSB = x; MSB = 0; cpu: |dma: iowrite32(LSB, tailp) | completes #(x-3) desc, curp = x-3 ... | tailp updated => irq | completes #(x-2) desc, curp = x-2 ... | completes #(x-1) desc, curp = x-1 ... | ... ... | completes #x desc, curp = tailp = x <= irqreturn | reaches tailp == curp = x, idle iowrite32(MSB, tailp + 4) | ... | tailp updated, starts fetching... | fetches #(x + 1) desc, sees cntrl = 0 | post Tx error, halt Signed-off-by: Andy Chiu <andy.chiu@sifive.com> Reported-by: Max Hsu <max.hsu@sifive.com> Reviewed-by: Greentime Hu <greentime.hu@sifive.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-13net: axienet: make the 64b addresable DMA depends on 64b archecturesAndy Chiu
Currently it is not safe to config the IP as 64-bit addressable on 32-bit archectures, which cannot perform a double-word store on its descriptor pointers. The pointer is 64-bit wide if the IP is configured as 64-bit, and the device would process the partially updated pointer on some states if the pointer was updated via two store-words. To prevent such condition, we force a probe fail if we discover that the IP has 64-bit capability but it is not running on a 64-Bit kernel. This is a series of patch (1/2). The next patch must be applied in order to make 64b DMA safe on 64b archectures. Signed-off-by: Andy Chiu <andy.chiu@sifive.com> Reported-by: Max Hsu <max.hsu@sifive.com> Reviewed-by: Greentime Hu <greentime.hu@sifive.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-13net: hns3: fix tm port shapping of fibre port is incorrect after driver ↵Guangbin Huang
initialization Currently in driver initialization process, driver will set shapping parameters of tm port to default speed read from firmware. However, the speed of SFP module may not be default speed, so shapping parameters of tm port may be incorrect. To fix this problem, driver sets new shapping parameters for tm port after getting exact speed of SFP module in this case. Fixes: 88d10bd6f730 ("net: hns3: add support for multiple media type") Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-13net: hns3: fix PF rss size initialization bugJie Wang
Currently hns3 driver misuses the VF rss size to initialize the PF rss size in hclge_tm_vport_tc_info_update. So this patch fix it by checking the vport id before initialization. Fixes: 7347255ea389 ("net: hns3: refactor PF rss get APIs with new common rss get APIs") Signed-off-by: Jie Wang <wangjie125@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-13net: hns3: restore tm priority/qset to default settings when tc disabledGuangbin Huang
Currently, settings parameters of schedule mode, dwrr, shaper of tm priority or qset of one tc are only be set when tc is enabled, they are not restored to the default settings when tc is disabled. It confuses users when they cat tm_priority or tm_qset files of debugfs. So this patch fixes it. Fixes: 848440544b41 ("net: hns3: Add support of TX Scheduler & Shaper to HNS3 driver") Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-13net: hns3: modify the ring param print infoJie Wang
Currently tx push is also a ring param. So the original ring param print info in hns3_is_ringparam_changed should be adjusted. Fixes: 07fdc163ac88 ("net: hns3: refactor hns3_set_ringparam()") Signed-off-by: Jie Wang <wangjie125@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-13net: hns3: don't push link state to VF if unaliveJian Shen
It's unnecessary to push link state to unalive VF, and the VF will query link state from PF when it being start works. Fixes: 18b6e31f8bf4 ("net: hns3: PF add support for pushing link status to VFs") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-13net: hns3: set port base vlan tbl_sta to false before removing old vlanGuangbin Huang
When modify port base vlan, the port base vlan tbl_sta needs to set to false before removing old vlan, to indicate this operation is not finish. Fixes: c0f46de30c96 ("net: hns3: fix port base vlan add fail when concurrent with reset") Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-10Merge branch '40GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-06-09 Grzegorz prevents addition of TC flower filters to TC0 and fixes queue iteration for VF ADQ to number of actual queues for i40e. Aleksandr prevents running of ethtool tests when device is being reset for i40e. Michal resolves an issue where iavf does not report its MAC address properly. * '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: iavf: Fix issue with MAC address of VF shown as zero i40e: Fix call trace in setup_tx_descriptors i40e: Fix calculating the number of queue pairs i40e: Fix adding ADQ filter to TC0 ==================== Link: https://lore.kernel.org/r/20220609162620.2619258-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-10rtw88: 8821c: fix access const table of channel parametersPing-Ke Shih
We would like to make chip_info table const, but 8821c uses one field as a variable, and causes core dump. To fix this, move the field to another struct that can be read and written. BUG: unable to handle page fault for address: ffffffffc09f52f4 PGD 5b5215067 P4D 5b5215067 PUD 5b5217067 PMD 111f61067 PTE 8000000111e07161 Oops: 0003 [#1] PREEMPT SMP NOPTI CPU: 6 PID: 436 Comm: NetworkManager Not tainted 5.18.0-rc7-debug-01822-g89d8f53ff6e7 #1 5cac31ca93432e53341863abfb3332fd98b144da Hardware name: HP HP Desktop M01-F1xxx/87D6, BIOS F.12 12/17/2020 RIP: 0010:rtw8821c_phy_set_param+0x262/0x380 [rtw88_8821c] Code: e8 53 f3 c0 d6 48 8b 43 10 4c 8b 63 38 be 24 0a 00 00 48 89 df 48 8b 40 68 e8 3a f3 c0 d6 89 e9 be 28 0a 00 00 48 89 df d3 e8 <41> 89 84 24 54 01 00 00 48 8b 43 10 4c 8b 63 38 48 8b 40 68 e8 15 RSP: 0018:ffffb08c417cb6f0 EFLAGS: 00010286 RAX: 0000000064b80c1c RBX: ffff93d15a0120e0 RCX: 0000000000000000 RDX: 0000000034028211 RSI: 0000000000000a28 RDI: ffff93d15a0120e0 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000006 R12: ffffffffc09f51a0 R13: ffff93d15a0156d0 R14: 0000000000000000 R15: 0000000000000001 FS: 00007f4e9b73d1c0(0000) GS:ffff93d83ab80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffc09f52f4 CR3: 0000000103b9e000 CR4: 0000000000350ee0 Call Trace: <TASK> rtw_core_start+0xbd/0x190 [rtw88_core de79d6bdfd083d102030858972032e5706726279] rtw_ops_start+0x26/0x40 [rtw88_core de79d6bdfd083d102030858972032e5706726279] drv_start+0x42/0x100 [mac80211 21e803d0ad10691f64c6c81ecc24c0c6c36e5d58] ieee80211_do_open+0x2fb/0x900 [mac80211 21e803d0ad10691f64c6c81ecc24c0c6c36e5d58] ieee80211_open+0x67/0x80 [mac80211 21e803d0ad10691f64c6c81ecc24c0c6c36e5d58] __dev_open+0xdd/0x180 [...] Fixes: 89d8f53ff6e7 ("wifi: rtw88: Fix Sparse warning for rtw8821c_hw_spec") Reported-by: Nathan Chancellor <nathan@kernel.org> Cc: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Tested-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220608020312.9663-1-pkshih@realtek.com
2022-06-09Merge tag 'mlx5-fixes-2022-06-08' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5 fixes 2022-06-08 This series provides bug fixes to mlx5 driver. * tag 'mlx5-fixes-2022-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5: fs, fail conflicting actions net/mlx5: Rearm the FW tracer after each tracer event net/mlx5: E-Switch, pair only capable devices net/mlx5e: CT: Fix cleanup of CT before cleanup of TC ct rules Revert "net/mlx5e: Allow relaxed ordering over VFs" MAINTAINERS: adjust MELLANOX ETHERNET INNOVA DRIVERS to TLS support removal ==================== Link: https://lore.kernel.org/r/20220608185855.19818-1-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-09nfp: flower: restructure flow-key for gre+vlan combinationEtienne van der Linde
Swap around the GRE and VLAN parts in the flow-key offloaded by the driver to fit in with other tunnel types and the firmware. Without this change used cases with GRE+VLAN on the outer header does not get offloaded as the flow-key mismatches what the firmware expect. Fixes: 0d630f58989a ("nfp: flower: add support to offload QinQ match") Fixes: 5a2b93041646 ("nfp: flower-ct: compile match sections of flow_payload") Signed-off-by: Etienne van der Linde <etienne.vanderlinde@corigine.com> Signed-off-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-09nfp: avoid unnecessary check warnings in nfp_app_get_vf_configFei Qin
nfp_net_sriov_check is added in nfp_app_get_vf_config which intends to ensure ivi->vlan_proto and ivi->max_tx_rate/min_tx_rate can be read from VF config table only when firmware supports corresponding capability. However, "nfp_app_get_vf_config" can be called by commands like "ip a", "ip link set $DEV up" and "ip link set $DEV vf $NUM vlan $param" (with VF). When using commands above, many warnings "ndo_set_vf_<cap_x> not supported" would appear if firmware doesn't support VF rate limit and 802.1ad VLAN assingment. If more VFs are created, things could get worse. Thus, this patch add an extra bool parameter for nfp_net_sriov_check to enable/disable the cap check warning report. Unnecessary warnings in nfp_app_get_vf_config can be avoided. Valid warnings in kinds of vf setting function can be reserved. Fixes: e0d0e1fdf1ed ("nfp: VF rate limit support") Fixes: 59359597b010 ("nfp: support 802.1ad VLAN assingment to VF") Signed-off-by: Fei Qin <fei.qin@corigine.com> Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com> Signed-off-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-09Merge tag 'net-5.19-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from bpf and netfilter. Current release - regressions: - eth: amt: fix possible null-ptr-deref in amt_rcv() Previous releases - regressions: - tcp: use alloc_large_system_hash() to allocate table_perturb - af_unix: fix a data-race in unix_dgram_peer_wake_me() - nfc: st21nfca: fix memory leaks in EVT_TRANSACTION handling - eth: ixgbe: fix unexpected VLAN rx in promisc mode on VF Previous releases - always broken: - ipv6: fix signed integer overflow in __ip6_append_data - netfilter: - nat: really support inet nat without l3 address - nf_tables: memleak flow rule from commit path - bpf: fix calling global functions from BPF_PROG_TYPE_EXT programs - openvswitch: fix misuse of the cached connection on tuple changes - nfc: nfcmrvl: fix memory leak in nfcmrvl_play_deferred - eth: altera: fix refcount leak in altera_tse_mdio_create Misc: - add Quentin Monnet to bpftool maintainers" * tag 'net-5.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (45 commits) net: amd-xgbe: fix clang -Wformat warning tcp: use alloc_large_system_hash() to allocate table_perturb net: dsa: realtek: rtl8365mb: fix GMII caps for ports with internal PHY net: dsa: mv88e6xxx: correctly report serdes link failure net: dsa: mv88e6xxx: fix BMSR error to be consistent with others net: dsa: mv88e6xxx: use BMSR_ANEGCOMPLETE bit for filling an_complete net: altera: Fix refcount leak in altera_tse_mdio_create net: openvswitch: fix misuse of the cached connection on tuple changes net: ethernet: mtk_eth_soc: fix misuse of mem alloc interface netdev[napi]_alloc_frag ip_gre: test csum_start instead of transport header au1000_eth: stop using virt_to_bus() ipv6: Fix signed integer overflow in l2tp_ip6_sendmsg ipv6: Fix signed integer overflow in __ip6_append_data nfc: nfcmrvl: Fix memory leak in nfcmrvl_play_deferred nfc: st21nfca: fix incorrect sizing calculations in EVT_TRANSACTION nfc: st21nfca: fix memory leaks in EVT_TRANSACTION handling nfc: st21nfca: fix incorrect validating logic in EVT_TRANSACTION net: ipv6: unexport __init-annotated seg6_hmac_init() net: xfrm: unexport __init-annotated xfrm4_protocol_init() net: mdio: unexport __init-annotated mdio_bus_init() ...
2022-06-09mellanox: mlx5: avoid uninitialized variable warning with gcc-12Linus Torvalds
gcc-12 started warning about 'tracker' being used uninitialized: drivers/net/ethernet/mellanox/mlx5/core/lag/lag.c: In function ‘mlx5_do_bond’: drivers/net/ethernet/mellanox/mlx5/core/lag/lag.c:786:28: warning: ‘tracker’ is used uninitialized [-Wuninitialized] 786 | struct lag_tracker tracker; | ^~~~~~~ which seems to be because it doesn't track how the use (and initialization) is bound by the 'do_bond' flag. But admittedly that 'do_bond' usage is fairly complicated, and involves passing it around as an argument to helper functions, so it's somewhat understandable that gcc doesn't see how that all works. This function could be rewritten to make the use of that tracker variable more obviously safe, but for now I'm just adding the forced initialization of it. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-06-09iavf: Fix issue with MAC address of VF shown as zeroMichal Wilczynski
After reinitialization of iavf, ice driver gets VIRTCHNL_OP_ADD_ETH_ADDR message with incorrectly set type of MAC address. Hardware address should have is_primary flag set as true. This way ice driver knows what it has to set as a MAC address. Check if the address is primary in iavf_add_filter function and set flag accordingly. To test set all-zero MAC on a VF. This triggers iavf re-initialization and VIRTCHNL_OP_ADD_ETH_ADDR message gets sent to PF. For example: ip link set dev ens785 vf 0 mac 00:00:00:00:00:00 This triggers re-initialization of iavf. New MAC should be assigned. Now check if MAC is non-zero: ip link show dev ens785 Fixes: a3e839d539e0 ("iavf: Add usage of new virtchnl format to set default MAC") Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-06-09i40e: Fix call trace in setup_tx_descriptorsAleksandr Loktionov
After PF reset and ethtool -t there was call trace in dmesg sometimes leading to panic. When there was some time, around 5 seconds, between reset and test there were no errors. Problem was that pf reset calls i40e_vsi_close in prep_for_reset and ethtool -t calls i40e_vsi_close in diag_test. If there was not enough time between those commands the second i40e_vsi_close starts before previous i40e_vsi_close was done which leads to crash. Add check to diag_test if pf is in reset and don't start offline tests if it is true. Add netif_info("testing failed") into unhappy path of i40e_diag_test() Fixes: e17bc411aea8 ("i40e: Disable offline diagnostics if VFs are enabled") Fixes: 510efb2682b3 ("i40e: Fix ethtool offline diagnostic with netqueues") Signed-off-by: Michal Jaron <michalx.jaron@intel.com> Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-06-09i40e: Fix calculating the number of queue pairsGrzegorz Szczurek
If ADQ is enabled for a VF, then actual number of queue pair is a number of currently available traffic classes for this VF. Without this change the configuration of the Rx/Tx queues fails with error. Fixes: d29e0d233e0d ("i40e: missing input validation on VF message handling by the PF") Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Bharathi Sreenivas <bharathi.sreenivas@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-06-09i40e: Fix adding ADQ filter to TC0Grzegorz Szczurek
Procedure of configure tc flower filters erroneously allows to create filters on TC0 where unfiltered packets are also directed by default. Issue was caused by insufficient checks of hw_tc parameter specifying the hardware traffic class to pass matching packets to. Fix checking hw_tc parameter which blocks creation of filters on TC0. Fixes: 2f4b411a3d67 ("i40e: Enable cloud filters via tc-flower") Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Bharathi Sreenivas <bharathi.sreenivas@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-06-08net: amd-xgbe: fix clang -Wformat warningJustin Stitt
see warning: | drivers/net/ethernet/amd/xgbe/xgbe-drv.c:2787:43: warning: format specifies | type 'unsigned short' but the argument has type 'int' [-Wformat] | netdev_dbg(netdev, "Protocol: %#06hx\n", ntohs(eth->h_proto)); | ~~~~~~ ^~~~~~~~~~~~~~~~~~~ Variadic functions (printf-like) undergo default argument promotion. Documentation/core-api/printk-formats.rst specifically recommends using the promoted-to-type's format flag. Also, as per C11 6.3.1.1: (https://www.open-std.org/jtc1/sc22/wg14/www/docs/n1548.pdf) `If an int can represent all values of the original type ..., the value is converted to an int; otherwise, it is converted to an unsigned int. These are called the integer promotions.` Since the argument is a u16 it will get promoted to an int and thus it is most accurate to use the %x format specifier here. It should be noted that the `#06` formatting sugar does not alter the promotion rules. Link: https://github.com/ClangBuiltLinux/linux/issues/378 Signed-off-by: Justin Stitt <jstitt007@gmail.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Link: https://lore.kernel.org/r/20220607191119.20686-1-jstitt007@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-08net: dsa: realtek: rtl8365mb: fix GMII caps for ports with internal PHYAlvin Šipraga
Since commit a18e6521a7d9 ("net: phylink: handle NA interface mode in phylink_fwnode_phy_connect()"), phylib defaults to GMII when no phy-mode or phy-connection-type property is specified in a DSA port node of the device tree. The same commit caused a regression in rtl8365mb whereby phylink would fail to connect, because the driver did not advertise support for GMII for ports with internal PHY. It should be noted that the aforementioned regression is not because the blamed commit was incorrect: on the contrary, the blamed commit is correcting the previous behaviour whereby unspecified phy-mode would cause the internal interface mode to be PHY_INTERFACE_MODE_NA. The rtl8365mb driver only worked by accident before because it _did_ advertise support for PHY_INTERFACE_MODE_NA, despite NA being reserved for internal use by phylink. With one mistake fixed, the other was exposed. Commit a5dba0f207e5 ("net: dsa: rtl8365mb: add GMII as user port mode") then introduced implicit support for GMII mode on ports with internal PHY to allow a PHY connection for device trees where the phy-mode is not explicitly set to "internal". At this point everything was working OK again. Subsequently, commit 6ff6064605e9 ("net: dsa: realtek: convert to phylink_generic_validate()") broke this behaviour again by discarding the usage of rtl8365mb_phy_mode_supported() - where this GMII support was indicated - while switching to the new .phylink_get_caps API. With the new API, rtl8365mb_phy_mode_supported() is no longer needed. Remove it altogether and add back the GMII capability - this time to rtl8365mb_phylink_get_caps() - so that the above default behaviour works for ports with internal PHY again. Fixes: 6ff6064605e9 ("net: dsa: realtek: convert to phylink_generic_validate()") Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/20220607184624.417641-1-alvin@pqrs.dk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-08Merge branch '10GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-06-07 This series contains updates to ixgbe driver only. Olivier Matz resolves an issue so that broadcast packets can still be received when VF removes promiscuous settings and removes setting of VLAN promiscuous, in promiscuous mode, to prevent a loop when VFs are bridged. * '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: ixgbe: fix unexpected VLAN Rx in promisc mode on VF ixgbe: fix bcast packets Rx on VF after promisc removal ==================== Link: https://lore.kernel.org/r/20220607181538.748786-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-08net: dsa: mv88e6xxx: correctly report serdes link failureRussell King (Oracle)
Phylink wants to know if the link has dropped since the last time state was retrieved, and the BMSR gives us that. Read the BMSR and use it when deciding the link state. Fill in the an_complete member as well for the emulated PHY state. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-08net: dsa: mv88e6xxx: fix BMSR error to be consistent with othersRussell King (Oracle)
Other errors accessing the registers in mv88e6352_serdes_pcs_get_state() print "PHY " before the register name, except for the BMSR. Make this consistent with the other error messages. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-08net: dsa: mv88e6xxx: use BMSR_ANEGCOMPLETE bit for filling an_completeMarek Behún
Commit ede359d8843a ("net: dsa: mv88e6xxx: Link in pcs_get_state() if AN is bypassed") added the ability to link if AN was bypassed, and added filling of state->an_complete field, but set it to true if AN was enabled in BMCR, not when AN was reported complete in BMSR. This was done because for some reason, when I wanted to use BMSR value to infer an_complete, I was looking at BMSR_ANEGCAPABLE bit (which was always 1), instead of BMSR_ANEGCOMPLETE bit. Use BMSR_ANEGCOMPLETE for filling state->an_complete. Fixes: ede359d8843a ("net: dsa: mv88e6xxx: Link in pcs_get_state() if AN is bypassed") Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-08net: altera: Fix refcount leak in altera_tse_mdio_createMiaoqian Lin
Every iteration of for_each_child_of_node() decrements the reference count of the previous node. When break from a for_each_child_of_node() loop, we need to explicitly call of_node_put() on the child node when not need anymore. Add missing of_node_put() to avoid refcount leak. Fixes: bbd2190ce96d ("Altera TSE: Add main and header file for Altera Ethernet Driver") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20220607041144.7553-1-linmq006@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-08net: ethernet: mtk_eth_soc: fix misuse of mem alloc interface ↵Chen Lin
netdev[napi]_alloc_frag When rx_flag == MTK_RX_FLAGS_HWLRO, rx_data_len = MTK_MAX_LRO_RX_LENGTH(4096 * 3) > PAGE_SIZE. netdev_alloc_frag is for alloction of page fragment only. Reference to other drivers and Documentation/vm/page_frags.rst Branch to use __get_free_pages when ring->frag_size > PAGE_SIZE. Signed-off-by: Chen Lin <chen45464546@163.com> Link: https://lore.kernel.org/r/1654692413-2598-1-git-send-email-chen45464546@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-08net/mlx5: fs, fail conflicting actionsMark Bloch
When combining two steering rules into one check not only do they share the same actions but those actions are also the same. This resolves an issue where when creating two different rules with the same match the actions are overwritten and one of the rules is deleted a FW syndrome can be seen in dmesg. mlx5_core 0000:03:00.0: mlx5_cmd_check:819:(pid 2105): DEALLOC_MODIFY_HEADER_CONTEXT(0x941) op_mod(0x0) failed, status bad resource state(0x9), syndrome (0x1ab444) Fixes: 0d235c3fabb7 ("net/mlx5: Add hash table to search FTEs in a flow-group") Signed-off-by: Mark Bloch <mbloch@nvidia.com> Reviewed-by: Maor Gottlieb <maorg@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-06-08net/mlx5: Rearm the FW tracer after each tracer eventFeras Daoud
The current design does not arm the tracer if traces are available before the tracer string database is fully loaded, leading to an unfunctional tracer. This fix will rearm the tracer every time the FW triggers tracer event regardless of the tracer strings database status. Fixes: c71ad41ccb0c ("net/mlx5: FW tracer, events handling") Signed-off-by: Feras Daoud <ferasda@nvidia.com> Signed-off-by: Roy Novich <royno@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-04 00:41:23 +0000