summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2024-08-16Merge branch '40GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== ice: iavf: add support for TC U32 filters on VFs Ahmed Zaki says: The Intel Ethernet 800 Series is designed with a pipeline that has an on-chip programmable capability called Dynamic Device Personalization (DDP). A DDP package is loaded by the driver during probe time. The DDP package programs functionality in both the parser and switching blocks in the pipeline, allowing dynamic support for new and existing protocols. Once the pipeline is configured, the driver can identify the protocol and apply any HW action in different stages, for example, direct packets to desired hardware queues (flow director), queue groups or drop. Patches 1-8 introduce a DDP package parser API that enables different pipeline stages in the driver to learn the HW parser capabilities from the DDP package that is downloaded to HW. The parser library takes raw packet patterns and masks (in binary) indicating the packet protocol fields to be matched and generates the final HW profiles that can be applied at the required stage. With this API, raw flow filtering for FDIR or RSS could be done on new protocols or headers without any driver or Kernel updates (only need to update the DDP package). These patches were submitted before [1] but were not accepted mainly due to lack of a user. Patches 9-11 extend the virtchnl support to allow the VF to request raw flow director filters. Upon receiving the raw FDIR filter request, the PF driver allocates and runs a parser lib instance and generates the hardware profile definitions required to program the FDIR stage. These were also submitted before [2]. Finally, patches 12 and 13 add TC U32 filter support to the iavf driver. Using the parser API, the ice driver runs the raw patterns sent by the user and then adds a new profile to the FDIR stage associated with the VF's VSI. Refer to examples in patch 13 commit message. [1]: https://lore.kernel.org/netdev/20230904021455.3944605-1-junfeng.guo@intel.com/ [2]: https://lore.kernel.org/intel-wired-lan/20230818064703.154183-1-junfeng.guo@intel.com/ * '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: iavf: add support for offloading tc U32 cls filters iavf: refactor add/del FDIR filters ice: enable FDIR filters from raw binary patterns for VFs ice: add method to disable FDIR SWAP option virtchnl: support raw packet in protocol header ice: add API for parser profile initialization ice: add UDP tunnels support to the parser ice: support turning on/off the parser's double vlan mode ice: add parser execution main loop ice: add parser internal helper functions ice: add debugging functions for the parser sections ice: parse and init various DDP parser sections ice: add parser create and destroy skeleton ==================== Link: https://patch.msgid.link/20240813222249.3708070-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-16idpf: remove redundant 'req_vec_chunks' NULL checkPavan Kumar Linga
'req_vec_chunks' is used to store the vector info received from the device control plane. The memory for it is allocated in idpf_send_alloc_vectors_msg and returns an error if the memory allocation fails. 'req_vec_chunks' cannot be NULL in the later code flow. So remove the conditional check to extract the vector ids received from the device control plane. Smatch static checker warning: drivers/net/ethernet/intel/idpf/idpf_lib.c:417 idpf_intr_req() error: we previously assumed 'adapter->req_vec_chunks' could be null (see line 360) Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/intel-wired-lan/a355ae8a-9011-4a85-a4d1-5b2793bb5f7b@stanley.mountain/ Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20240814175903.4166390-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-16net: ag71xx: use devm for register_netdevRosen Penev
Allows completely removing the remove function. Nothing is being done manually now. Tested on TP-LINK Archer C7v2. Signed-off-by: Rosen Penev <rosenp@gmail.com> Link: https://patch.msgid.link/20240813170516.7301-4-rosenp@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-16net: ag71xx: use devm for of_mdiobus_registerRosen Penev
Allows removing ag71xx_mdio_remove. Removed ag.mii_bus variable. Local one can be used with devm. Easier to reason about as mii_bus is only used here now. Also shrinks the struct slightly. Signed-off-by: Rosen Penev <rosenp@gmail.com> Link: https://patch.msgid.link/20240813170516.7301-3-rosenp@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-16net: ag71xx: devm_clk_get_enabledRosen Penev
Allows removal of clk_prepare_enable to simplify the code slightly. Tested on a TP-LINK Archer C7v2. Signed-off-by: Rosen Penev <rosenp@gmail.com> Link: https://patch.msgid.link/20240813170516.7301-2-rosenp@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-16net: hns3: Use ipv6_addr_{cpu_to_be32,be32_to_cpu} helpersSimon Horman
Use new ipv6_addr_cpu_to_be32 and ipv6_addr_be32_to_cpu helpers, and IPV6_ADDR_WORDS. This is arguably slightly nicer. No functional change intended. Compile tested only. Suggested-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/netdev/c7684349-535c-45a4-9a74-d47479a50020@lunn.ch/ Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20240813-ipv6_addr-helpers-v2-3-5c974f8cca3e@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-16net: ethernet: mtk_eth_soc: Use ipv6_addr_{cpu_to_be32,be32_to_cpu} helpersSimon Horman
Use ipv6_addr_cpu_to_be32 and ipv6_addr_be32_to_cpu helpers to convert address, rather than open coding the conversion. No functional change intended. Compile tested only. Suggested-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/netdev/c7684349-535c-45a4-9a74-d47479a50020@lunn.ch/ Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20240813-ipv6_addr-helpers-v2-2-5c974f8cca3e@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-16net: dsa: microchip: fix KSZ87xx family structure wrt the datasheetPieter Van Trappen
The KSZ87xx switches have 32 static MAC address table entries and not 8. This fixes -ENOSPC non-critical errors from ksz8_add_sta_mac when configured as a bridge. Add a new ksz87xx_dev_ops structure to be able to use the ksz_r_mib_stat64 pointer for this family; this corrects a wrong mib->counters cast to ksz88xx_stats_raw. This fixes iproute2 statistics. Rename ksz8_dev_ops structure to ksz88x3_dev_ops, in line with ksz_is_* naming conventions from ksz_common.h. Signed-off-by: Pieter Van Trappen <pieter.van.trappen@cern.ch> Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com> Link: https://patch.msgid.link/20240813142750.772781-6-vtpieter@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-16net: dsa: microchip: add WoL support for KSZ87xx familyPieter Van Trappen
Add WoL support for KSZ87xx family of switches. This code was tested with a KSZ8794 chip. Implement ksz_common usage of the new device-tree property 'microchip,pme-active-high'. Make use of the now generalized ksz_common WoL functions, adding an additional interrupt register write for KSZ87xx. Add helper functions to convert from PME (port) read/writes to indirect register read/writes in the dedicated ksz8795 sources. Add initial configuration during (port) setup as per KSZ9477. Signed-off-by: Pieter Van Trappen <pieter.van.trappen@cern.ch> Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com> Link: https://patch.msgid.link/20240813142750.772781-5-vtpieter@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-16net: dsa: microchip: generalize KSZ9477 WoL functions at ksz_commonPieter Van Trappen
Generalize KSZ9477 WoL functions at ksz_common. Move dedicated registers and generic masks to existing structures & defines for that purpose. Introduction of PME (port) read/write helper functions, which happen to be the generic read/write for KSZ9477 but not for the incoming KSZ87xx patch. Signed-off-by: Pieter Van Trappen <pieter.van.trappen@cern.ch> Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com> Link: https://patch.msgid.link/20240813142750.772781-4-vtpieter@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-16net: dsa: microchip: move KSZ9477 WoL functions to ksz_commonPieter Van Trappen
Move KSZ9477 WoL functions to ksz_common, in preparation for adding KSZ87xx family support. Signed-off-by: Pieter Van Trappen <pieter.van.trappen@cern.ch> Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com> Link: https://patch.msgid.link/20240813142750.772781-3-vtpieter@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-16net: phy: dp83tg720: Add cable testing supportOleksij Rempel
Introduce cable testing support for the DP83TG720 PHY. This implementation is based on the "DP83TG720S-Q1: Configuring for Open Alliance Specification Compliance (Rev. B)" application note. The feature has been tested with cables of various lengths: - No cable: 1m till open reported. - 5 meter cable: reported properly. - 20 meter cable: reported as 19m. - 40 meter cable: reported as cable ok. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://patch.msgid.link/20240812073046.1728288-3-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-16phy: Add Open Alliance helpers for the PHY frameworkOleksij Rempel
Introduce helper functions specific to Open Alliance diagnostics, integrating them into the PHY framework. Currently, these helpers are limited to 1000BaseT1 specific TDR functionality. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://patch.msgid.link/20240812073046.1728288-2-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-16net: mscc: ocelot: treat 802.1ad tagged traffic as 802.1Q-untaggedVladimir Oltean
I was revisiting the topic of 802.1ad treatment in the Ocelot switch [0] and realized that not only is its basic VLAN classification pipeline improper for offloading vlan_protocol 802.1ad bridges, but also improper for offloading regular 802.1Q bridges already. Namely, 802.1ad-tagged traffic should be treated as VLAN-untagged by bridged ports, but this switch treats it as if it was 802.1Q-tagged with the same VID as in the 802.1ad header. This is markedly different to what the Linux bridge expects; see the "other_tpid()" function in tools/testing/selftests/net/forwarding/bridge_vlan_aware.sh. An idea came to me that the VCAP IS1 TCAM is more powerful than I'm giving it credit for, and that it actually overwrites the classified VID before the VLAN Table lookup takes place. In other words, it can be used even to save a packet from being dropped on ingress due to VLAN membership. Add a sophisticated TCAM rule hardcoded into the driver to force the switch to behave like a Linux bridge with vlan_filtering 1 vlan_protocol 802.1Q. Regarding the lifetime of the filter: eventually the bridge will disappear, and vlan_filtering on the port will be restored to 0 for standalone mode. Then the filter will be deleted. [0]: https://lore.kernel.org/netdev/20201009122947.nvhye4hvcha3tljh@skbuf/ Fixes: 7142529f1688 ("net: mscc: ocelot: add VLAN filtering") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-08-16net: dsa: felix: fix VLAN tag loss on CPU reception with ocelot-8021qVladimir Oltean
There is a major design bug with ocelot-8021q, which is that it expects more of the hardware than the hardware can actually do. The short summary of the issue is that when a port is under a VLAN-aware bridge and we use this tagging protocol, VLAN upper interfaces of this port do not see RX traffic. We use VCAP ES0 (egress rewriter) rules towards the tag_8021q CPU port to encapsulate packets with an outer tag, later stripped by software, that depends on the source user port. We do this so that packets can be identified in ocelot_rcv(). To be precise, we create rules with push_outer_tag = OCELOT_ES0_TAG and push_inner_tag = 0. With this configuration, we expect the switch to keep the inner tag configuration as found in the packet (if it was untagged on user port ingress, keep it untagged, otherwise preserve the VLAN tag unmodified as the inner tag towards the tag_8021q CPU port). But this is not what happens. Instead, table "Tagging Combinations" from the user manual suggests that when the ES0 action is "PUSH_OUTER_TAG=1 and PUSH_INNER_TAG=0", there will be "no inner tag". Experimentation further clarifies what this means. It appears that this "inner tag" which is not pushed into the packet on its egress towards the CPU is none other than the classified VLAN. When the ingress user port is standalone or under a VLAN-unaware bridge, the classified VLAN is a discardable quantity: it is a fixed value - the result of ocelot_vlan_unaware_pvid()'s configuration, and actually independent of the VID from any 802.1Q header that may be in the frame. It is actually preferable to discard the "inner tag" in this case. The problem is when the ingress port is under a VLAN-aware bridge. Then, the classified VLAN is taken from the frame's 802.1Q header, with a fallback on the bridge port's PVID. It would be very good to not discard the "inner tag" here, because if we do, we break communication with any 8021q VLAN uppers that the port might have. These have a processing path outside the bridge. There seems to be nothing else we can do except to change the configuration for VCAP ES0 rules, to actually push the inner VLAN into the frame. There are 2 options for that, first is to push a fixed value specified in the rule, and second is to push a fixed value, plus (aka arithmetic +) the classified VLAN. We choose the second option, and we select that fixed value as 0. Thus, what is pushed in the inner tag is just the classified VLAN. From there, we need to perform software untagging, in the receive path, of stuff that was untagged on the wire. Fixes: 7c83a7c539ab ("net: dsa: add a second tagger for Ocelot switches based on tag_8021q") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-08-16net: mscc: ocelot: serialize access to the injection/extraction groupsVladimir Oltean
As explained by Horatiu Vultur in commit 603ead96582d ("net: sparx5: Add spinlock for frame transmission from CPU") which is for a similar hardware design, multiple CPUs can simultaneously perform injection or extraction. There are only 2 register groups for injection and 2 for extraction, and the driver only uses one of each. So we'd better serialize access using spin locks, otherwise frame corruption is possible. Note that unlike in sparx5, FDMA in ocelot does not have this issue because struct ocelot_fdma_tx_ring already contains an xmit_lock. I guess this is mostly a problem for NXP LS1028A, as that is dual core. I don't think VSC7514 is. So I'm blaming the commit where LS1028A (aka the felix DSA driver) started using register-based packet injection and extraction. Fixes: 0a6f17c6ae21 ("net: dsa: tag_ocelot_8021q: add support for PTP timestamping") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-08-16net: mscc: ocelot: fix QoS class for injected packets with "ocelot-8021q"Vladimir Oltean
There are 2 distinct code paths (listed below) in the source code which set up an injection header for Ocelot(-like) switches. Code path (2) lacks the QoS class and source port being set correctly. Especially the improper QoS classification is a problem for the "ocelot-8021q" alternative DSA tagging protocol, because we support tc-taprio and each packet needs to be scheduled precisely through its time slot. This includes PTP, which is normally assigned to a traffic class other than 0, but would be sent through TC 0 nonetheless. The code paths are: (1) ocelot_xmit_common() from net/dsa/tag_ocelot.c - called only by the standard "ocelot" DSA tagging protocol which uses NPI-based injection - sets up bit fields in the tag manually to account for a small difference (destination port offset) between Ocelot and Seville. Namely, ocelot_ifh_set_dest() is omitted out of ocelot_xmit_common(), because there's also seville_ifh_set_dest(). (2) ocelot_ifh_set_basic(), called by: - ocelot_fdma_prepare_skb() for FDMA transmission of the ocelot switchdev driver - ocelot_port_xmit() -> ocelot_port_inject_frame() for register-based transmission of the ocelot switchdev driver - felix_port_deferred_xmit() -> ocelot_port_inject_frame() for the DSA tagger ocelot-8021q when it must transmit PTP frames (also through register-based injection). sets the bit fields according to its own logic. The problem is that (2) doesn't call ocelot_ifh_set_qos_class(). Copying that logic from ocelot_xmit_common() fixes that. Unfortunately, although desirable, it is not easily possible to de-duplicate code paths (1) and (2), and make net/dsa/tag_ocelot.c directly call ocelot_ifh_set_basic()), because of the ocelot/seville difference. This is the "minimal" fix with some logic duplicated (but at least more consolidated). Fixes: 0a6f17c6ae21 ("net: dsa: tag_ocelot_8021q: add support for PTP timestamping") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-08-16net: mscc: ocelot: use ocelot_xmit_get_vlan_info() also for FDMA and ↵Vladimir Oltean
register injection Problem description ------------------- On an NXP LS1028A (felix DSA driver) with the following configuration: - ocelot-8021q tagging protocol - VLAN-aware bridge (with STP) spanning at least swp0 and swp1 - 8021q VLAN upper interfaces on swp0 and swp1: swp0.700, swp1.700 - ptp4l on swp0.700 and swp1.700 we see that the ptp4l instances do not see each other's traffic, and they all go to the grand master state due to the ANNOUNCE_RECEIPT_TIMEOUT_EXPIRES condition. Jumping to the conclusion for the impatient ------------------------------------------- There is a zero-day bug in the ocelot switchdev driver in the way it handles VLAN-tagged packet injection. The correct logic already exists in the source code, in function ocelot_xmit_get_vlan_info() added by commit 5ca721c54d86 ("net: dsa: tag_ocelot: set the classified VLAN during xmit"). But it is used only for normal NPI-based injection with the DSA "ocelot" tagging protocol. The other injection code paths (register-based and FDMA-based) roll their own wrong logic. This affects and was noticed on the DSA "ocelot-8021q" protocol because it uses register-based injection. By moving ocelot_xmit_get_vlan_info() to a place that's common for both the DSA tagger and the ocelot switch library, it can also be called from ocelot_port_inject_frame() in ocelot.c. We need to touch the lines with ocelot_ifh_port_set()'s prototype anyway, so let's rename it to something clearer regarding what it does, and add a kernel-doc. ocelot_ifh_set_basic() should do. Investigation notes ------------------- Debugging reveals that PTP event (aka those carrying timestamps, like Sync) frames injected into swp0.700 (but also swp1.700) hit the wire with two VLAN tags: 00000000: 01 1b 19 00 00 00 00 01 02 03 04 05 81 00 02 bc ~~~~~~~~~~~ 00000010: 81 00 02 bc 88 f7 00 12 00 2c 00 00 02 00 00 00 ~~~~~~~~~~~ 00000020: 00 00 00 00 00 00 00 00 00 00 00 01 02 ff fe 03 00000030: 04 05 00 01 00 04 00 00 00 00 00 00 00 00 00 00 00000040: 00 00 The second (unexpected) VLAN tag makes felix_check_xtr_pkt() -> ptp_classify_raw() fail to see these as PTP packets at the link partner's receiving end, and return PTP_CLASS_NONE (because the BPF classifier is not written to expect 2 VLAN tags). The reason why packets have 2 VLAN tags is because the transmission code treats VLAN incorrectly. Neither ocelot switchdev, nor felix DSA, declare the NETIF_F_HW_VLAN_CTAG_TX feature. Therefore, at xmit time, all VLANs should be in the skb head, and none should be in the hwaccel area. This is done by: static struct sk_buff *validate_xmit_vlan(struct sk_buff *skb, netdev_features_t features) { if (skb_vlan_tag_present(skb) && !vlan_hw_offload_capable(features, skb->vlan_proto)) skb = __vlan_hwaccel_push_inside(skb); return skb; } But ocelot_port_inject_frame() handles things incorrectly: ocelot_ifh_port_set(ifh, port, rew_op, skb_vlan_tag_get(skb)); void ocelot_ifh_port_set(struct sk_buff *skb, void *ifh, int port, u32 rew_op) { (...) if (vlan_tag) ocelot_ifh_set_vlan_tci(ifh, vlan_tag); (...) } The way __vlan_hwaccel_push_inside() pushes the tag inside the skb head is by calling: static inline void __vlan_hwaccel_clear_tag(struct sk_buff *skb) { skb->vlan_present = 0; } which does _not_ zero out skb->vlan_tci as seen by skb_vlan_tag_get(). This means that ocelot, when it calls skb_vlan_tag_get(), sees (and uses) a residual skb->vlan_tci, while the same VLAN tag is _already_ in the skb head. The trivial fix for double VLAN headers is to replace the content of ocelot_ifh_port_set() with: if (skb_vlan_tag_present(skb)) ocelot_ifh_set_vlan_tci(ifh, skb_vlan_tag_get(skb)); but this would not be correct either, because, as mentioned, vlan_hw_offload_capable() is false for us, so we'd be inserting dead code and we'd always transmit packets with VID=0 in the injection frame header. I can't actually test the ocelot switchdev driver and rely exclusively on code inspection, but I don't think traffic from 8021q uppers has ever been injected properly, and not double-tagged. Thus I'm blaming the introduction of VLAN fields in the injection header - early driver code. As hinted at in the early conclusion, what we _want_ to happen for VLAN transmission was already described once in commit 5ca721c54d86 ("net: dsa: tag_ocelot: set the classified VLAN during xmit"). ocelot_xmit_get_vlan_info() intends to ensure that if the port through which we're transmitting is under a VLAN-aware bridge, the outer VLAN tag from the skb head is stripped from there and inserted into the injection frame header (so that the packet is processed in hardware through that actual VLAN). And in all other cases, the packet is sent with VID=0 in the injection frame header, since the port is VLAN-unaware and has logic to strip this VID on egress (making it invisible to the wire). Fixes: 08d02364b12f ("net: mscc: fix the injection header") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-08-15virtio-net: synchronize probe with ndo_set_featuresJason Wang
We calculate guest offloads during probe without the protection of rtnl_lock. This lead to race between probe and ndo_set_features. Fix this by moving the calculation under the rtnl_lock. Fixes: 3f93522ffab2 ("virtio-net: switch off offloads on demand if possible on XDP set") Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://patch.msgid.link/20240814052228.4654-5-jasowang@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-15virtio-net: synchronize operstate with admin state on up/downJason Wang
This patch synchronizes operstate with admin state per RFC2863. This is done by trying to toggle the carrier upon open/close and synchronize with the config change work. This allows to propagate status correctly to stacked devices like: ip link add link enp0s3 macvlan0 type macvlan ip link set link enp0s3 down ip link show Before this patch: 3: enp0s3: <BROADCAST,MULTICAST> mtu 1500 qdisc pfifo_fast state DOWN mode DEFAULT group default qlen 1000 link/ether 00:00:05:00:00:09 brd ff:ff:ff:ff:ff:ff ...... 5: macvlan0@enp0s3: <BROADCAST,MULTICAST,UP,LOWER_UP,M-DOWN> mtu 1500 qdisc noqueue state UP mode DEFAULT group default qlen 1000 link/ether b2:a9:c5:04:da:53 brd ff:ff:ff:ff:ff:ff After this patch: 3: enp0s3: <BROADCAST,MULTICAST> mtu 1500 qdisc pfifo_fast state DOWN mode DEFAULT group default qlen 1000 link/ether 00:00:05:00:00:09 brd ff:ff:ff:ff:ff:ff ... 5: macvlan0@enp0s3: <NO-CARRIER,BROADCAST,MULTICAST,UP,M-DOWN> mtu 1500 qdisc noqueue state LOWERLAYERDOWN mode DEFAULT group default qlen 1000 link/ether b2:a9:c5:04:da:53 brd ff:ff:ff:ff:ff:ff Cc: Venkat Venkatsubra <venkat.x.venkatsubra@oracle.com> Cc: Gia-Khanh Nguyen <gia-khanh.nguyen@oracle.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://patch.msgid.link/20240814052228.4654-4-jasowang@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-15bnxt_en: Don't clear ntuple filters and rss contexts during ethtool opsPavan Chebbi
The driver currently blindly deletes its cache of RSS cotexts and ntuple filters when the ethtool channel count is changing. It also deletes the ntuple filters cache when the default indirection table is changing. The core will not allow ethtool channels to drop below any that have been configured as ntuple destinations since this commit from 2022: 47f3ecf4763d ("ethtool: Fail number of channels change when it conflicts with rxnfc") So there is absolutely no need to delete the ntuple filters and RSS contexts when changing ethtool channels. It is also unnecessary to delete ntuple filters when the default RSS indirection table is changing. Remove bnxt_clear_usr_fltrs() and bnxt_clear_rss_ctxis() from the ethtool ops and change them to static functions. This bug will cause confusion to the end user and causes failure when running the rss_ctx.py selftest. Fixes: 1018319f949c ("bnxt_en: Invalidate user filters when needed") Reported-by: Jakub Kicinski <kuba@kernel.org> Closes: https://lore.kernel.org/netdev/20240725111912.7bc17cf6@kernel.org/ Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20240814225429.199280-1-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-15virtio_net: move netdev_tx_reset_queue() call before RX napi enableJiri Pirko
During suspend/resume the following BUG was hit: ------------[ cut here ]------------ kernel BUG at lib/dynamic_queue_limits.c:99! Internal error: Oops - BUG: 0 [#1] SMP ARM Modules linked in: bluetooth ecdh_generic ecc libaes CPU: 1 PID: 1282 Comm: rtcwake Not tainted 6.10.0-rc3-00732-gc8bd1f7f3e61 #15240 Hardware name: Generic DT based system PC is at dql_completed+0x270/0x2cc LR is at __free_old_xmit+0x120/0x198 pc : [<c07ffa54>]    lr : [<c0c42bf4>]    psr: 80000013 ... Flags: Nzcv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none Control: 10c5387d  Table: 43a4406a  DAC: 00000051 ... Process rtcwake (pid: 1282, stack limit = 0xfbc21278) Stack: (0xe0805e80 to 0xe0806000) ... Call trace:  dql_completed from __free_old_xmit+0x120/0x198  __free_old_xmit from free_old_xmit+0x44/0xe4  free_old_xmit from virtnet_poll_tx+0x88/0x1b4  virtnet_poll_tx from __napi_poll+0x2c/0x1d4  __napi_poll from net_rx_action+0x140/0x2b4  net_rx_action from handle_softirqs+0x11c/0x350  handle_softirqs from call_with_stack+0x18/0x20  call_with_stack from do_softirq+0x48/0x50  do_softirq from __local_bh_enable_ip+0xa0/0xa4  __local_bh_enable_ip from virtnet_open+0xd4/0x21c  virtnet_open from virtnet_restore+0x94/0x120  virtnet_restore from virtio_device_restore+0x110/0x1f4  virtio_device_restore from dpm_run_callback+0x3c/0x100  dpm_run_callback from device_resume+0x12c/0x2a8  device_resume from dpm_resume+0x12c/0x1e0  dpm_resume from dpm_resume_end+0xc/0x18  dpm_resume_end from suspend_devices_and_enter+0x1f0/0x72c  suspend_devices_and_enter from pm_suspend+0x270/0x2a0  pm_suspend from state_store+0x68/0xc8  state_store from kernfs_fop_write_iter+0x10c/0x1cc  kernfs_fop_write_iter from vfs_write+0x2b0/0x3dc  vfs_write from ksys_write+0x5c/0xd4  ksys_write from ret_fast_syscall+0x0/0x54 Exception stack(0xe8bf1fa8 to 0xe8bf1ff0) ... ---[ end trace 0000000000000000 ]--- After virtnet_napi_enable() is called, the following path is hit: __napi_poll() -> virtnet_poll() -> virtnet_poll_cleantx() -> netif_tx_wake_queue() That wakes the TX queue and allows skbs to be submitted and accounted by BQL counters. Then netdev_tx_reset_queue() is called that resets BQL counters and eventually leads to the BUG in dql_completed(). Move virtnet_napi_tx_enable() what does BQL counters reset before RX napi enable to avoid the issue. Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Closes: https://lore.kernel.org/netdev/e632e378-d019-4de7-8f13-07c572ab37a9@samsung.com/ Fixes: c8bd1f7f3e61 ("virtio_net: add support for Byte Queue Limits") Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Jiri Pirko <jiri@nvidia.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Link: https://patch.msgid.link/20240814122500.1710279-1-jiri@resnulli.us Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-15net/mlx5: Use cpumask_local_spread() instead of custom codeErwan Velu
Commit 2acda57736de ("net/mlx5e: Improve remote NUMA preferences used for the IRQ affinity hints") removed the usage of cpumask_local_spread(). The issue explained in this commit was fixed by commit 406d394abfcd ("cpumask: improve on cpumask_local_spread() locality"). Since this commit, mlx5_cpumask_default_spread() is having the same behavior as cpumask_local_spread(). This commit is about : - removing the specific logic and use cpumask_local_spread() instead - passing mlx5_core_dev as argument to more flexibility mlx5_cpumask_default_spread() is kept as it could be useful for some future specific quirks. Signed-off-by: Erwan Velu <e.velu@criteo.com> Acked-by: Yury Norov <yury.norov@gmail.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/20240812082244.22810-1-e.velu@criteo.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-15ipv4: Remove redundant !ifa->ifa_dev check.Kuniyuki Iwashima
Now, ifa_dev is only set in inet_alloc_ifa() and never NULL after ifa gets visible. Let's remove the unneeded NULL check for ifa->ifa_dev. Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20240809235406.50187-4-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-15net: macb: increase max_mtu for oversized framesPieter Van Trappen
Increase max_mtu from 1500 to 1518 bytes when not configured for jumbo frames. Use 1536 as a starting point as documented in macb.h for oversized (big) frames, which is the configuration applied in case jumbo frames capability is not configured; ref. macb_main.c. Signed-off-by: Pieter Van Trappen <pieter.van.trappen@cern.ch> Link: https://patch.msgid.link/20240812090657.583821-1-vtpieter@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. Conflicts: Documentation/devicetree/bindings/net/fsl,qoriq-mc-dpmac.yaml c25504a0ba36 ("dt-bindings: net: fsl,qoriq-mc-dpmac: add missed property phys") be034ee6c33d ("dt-bindings: net: fsl,qoriq-mc-dpmac: using unevaluatedProperties") https://lore.kernel.org/20240815110934.56ae623a@canb.auug.org.au drivers/net/dsa/vitesse-vsc73xx-core.c 5b9eebc2c7a5 ("net: dsa: vsc73xx: pass value in phy_write operation") fa63c6434b6f ("net: dsa: vsc73xx: check busy flag in MDIO operations") 2524d6c28bdc ("net: dsa: vsc73xx: use defined values in phy operations") https://lore.kernel.org/20240813104039.429b9fe6@canb.auug.org.au Resolve by using FIELD_PREP(), Stephen's resolution is simpler. Adjacent changes: net/vmw_vsock/af_vsock.c 69139d2919dd ("vsock: fix recursive ->recvmsg calls") 744500d81f81 ("vsock: add support for SIOCOUTQ ioctl") Link: https://patch.msgid.link/20240815141149.33862-1-pabeni@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-15net: hns3: use correct release function during uninitializationPeiyang Wang
pci_request_regions is called to apply for PCI I/O and memory resources when the driver is initialized, Therefore, when the driver is uninstalled, pci_release_regions should be used to release PCI I/O and memory resources instead of pci_release_mem_regions is used to release memory reasouces only. Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-08-15net: hns3: void array out of bound when loop tnl_numPeiyang Wang
When query reg inf of SSU, it loops tnl_num times. However, tnl_num comes from hardware and the length of array is a fixed value. To void array out of bound, make sure the loop time is not greater than the length of array Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-08-15net: hns3: fix a deadlock problem when config TC during resettingJie Wang
When config TC during the reset process, may cause a deadlock, the flow is as below: pf reset start │ ▼ ...... setup tc │ │ ▼ ▼ DOWN: napi_disable() napi_disable()(skip) │ │ │ ▼ ▼ ...... ...... │ │ ▼ │ napi_enable() │ ▼ UINIT: netif_napi_del() │ ▼ ...... │ ▼ INIT: netif_napi_add() │ ▼ ...... global reset start │ │ ▼ ▼ UP: napi_enable()(skip) ...... │ │ ▼ ▼ ...... napi_disable() In reset process, the driver will DOWN the port and then UINIT, in this case, the setup tc process will UP the port before UINIT, so cause the problem. Adds a DOWN process in UINIT to fix it. Fixes: bb6b94a896d4 ("net: hns3: Add reset interface implementation in client") Signed-off-by: Jie Wang <wangjie125@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-08-15net: hns3: use the user's cfg after resetPeiyang Wang
Consider the followed case that the user change speed and reset the net interface. Before the hw change speed successfully, the driver get old old speed from hw by timer task. After reset, the previous speed is config to hw. As a result, the new speed is configed successfully but lost after PF reset. The followed pictured shows more dirrectly. +------+ +----+ +----+ | USER | | PF | | HW | +---+--+ +-+--+ +-+--+ | ethtool -s 100G | | +------------------>| set speed 100G | | +--------------------->| | | set successfully | | |<---------------------+---+ | |query cfg (timer task)| | | +--------------------->| | handle speed | | return 200G | | changing event | ethtool --reset |<---------------------+ | (100G) +------------------>| cfg previous speed |<--+ | | after reset (200G) | | +--------------------->| | | +---+ | |query cfg (timer task)| | | +--------------------->| | handle speed | | return 100G | | changing event | |<---------------------+ | (200G) | | |<--+ | |query cfg (timer task)| | +--------------------->| | | return 200G | | |<---------------------+ | | | v v v This patch save new speed if hw change speed successfully, which will be used after reset successfully. Fixes: 2d03eacc0b7e ("net: hns3: Only update mac configuation when necessary") Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-08-15net: hns3: fix wrong use of semaphore upJie Wang
Currently, if hns3 PF or VF FLR reset failed after five times retry, the reset done process will directly release the semaphore which has already released in hclge_reset_prepare_general. This will cause down operation fail. So this patch fixes it by adding reset state judgement. The up operation is only called after successful PF FLR reset. Fixes: 8627bdedc435 ("net: hns3: refactor the precedure of PF FLR") Fixes: f28368bb4542 ("net: hns3: refactor the procedure of VF FLR") Signed-off-by: Jie Wang <wangjie125@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-08-15pse-core: Conditionally set current limit during PI regulator registrationOleksij Rempel
Fix an issue where `devm_regulator_register()` would fail for PSE controllers that do not support current limit control, such as simple GPIO-based controllers like the podl-pse-regulator. The `REGULATOR_CHANGE_CURRENT` flag and `max_uA` constraint are now conditionally set only if the `pi_set_current_limit` operation is supported. This change prevents the regulator registration routine from attempting to call `pse_pi_set_current_limit()`, which would return `-EOPNOTSUPP` and cause the registration to fail. Fixes: 4a83abcef5f4f ("net: pse-pd: Add new power limit get and set c33 features") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Kory Maincent <kory.maincent@bootlin.com> Tested-by: Kyle Swenson <kyle.swenson@est.tech> Link: https://patch.msgid.link/20240813073719.2304633-1-o.rempel@pengutronix.de Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-08-15net: thunder_bgx: Fix netdev structure allocationMarc Zyngier
Commit 94833addfaba ("net: thunderx: Unembed netdev structure") had a go at dynamically allocating the netdev structures for the thunderx_bgx driver. This change results in my ThunderX box catching fire (to be fair, it is what it does best). The issues with this change are that: - bgx_lmac_enable() is called *after* bgx_acpi_register_phy() and bgx_init_of_phy(), both expecting netdev to be a valid pointer. - bgx_init_of_phy() populates the MAC addresses for *all* LMACs attached to a given BGX instance, and thus needs netdev for each of them to have been allocated. There is a few things to be said about how the driver mixes LMAC and BGX states which leads to this sorry state, but that's beside the point. To address this, go back to a situation where all netdev structures are allocated before the driver starts relying on them, and move the freeing of these structures to driver removal. Someone brave enough can always go and restructure the driver if they want. Fixes: 94833addfaba ("net: thunderx: Unembed netdev structure") Signed-off-by: Marc Zyngier <maz@kernel.org> Cc: Breno Leitao <leitao@debian.org> Cc: Sunil Goutham <sgoutham@marvell.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Breno Leitao <leitao@debian.org> Link: https://patch.msgid.link/20240812141322.1742918-1-maz@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-08-14Merge tag 'wireless-2024-08-14' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless Kalle Valo says: ==================== wireless fixes for v6.11 We have few fixes to drivers. The most important here is a fix for iwlwifi which caused major slowdowns for several users. * tag 'wireless-2024-08-14' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: wifi: iwlwifi: correctly lookup DMA address in SG table wifi: mt76: mt7921: fix NULL pointer access in mt7921_ipv6_addr_change wifi: brcmfmac: cfg80211: Handle SSID based pmksa deletion wifi: rtlwifi: rtl8192du: Initialise value32 in _rtl92du_init_queue_reserved_page wifi: ath12k: use 128 bytes aligned iova in transmit path for WCN7850 ==================== Link: https://patch.msgid.link/20240814171606.E14A0C116B1@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-14cxgb4: Avoid -Wflex-array-member-not-at-end warningGustavo A. R. Silva
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are getting ready to enable it, globally. Change the type of the middle struct member currently causing trouble from `struct tc_u32_sel` to `struct tc_u32_sel_hdr`. Fix the following warning: drivers/net/ethernet/chelsio/cxgb4/cxgb4_tc_u32_parse.h:245:27: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://patch.msgid.link/97388e8a7990975aa56cf0ada211764c735c3432.1723586870.git.gustavoars@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-14bnxt_en: avoid truncation of per rx run debugfs filenameSimon Horman
Although it seems unlikely in practice - there would need to be rx ring indexes greater than 10^10 - it is theoretically possible for the filename of per rx ring debugfs files to be truncated. This is because although a 16 byte buffer is provided, the length of the filename is restricted to 10 bytes. Remove this restriction and allow the entire buffer to be used. Also reduce the buffer to 12 bytes, which is sufficient. Given that the range of rx ring indexes likely much smaller than the maximum range of a 32-bit signed integer, a smaller buffer could be used, with some further changes. But this change seems simple, robust, and has minimal stack overhead. Flagged by gcc-14: .../bnxt_debugfs.c: In function 'bnxt_debug_dev_init': drivers/net/ethernet/broadcom/bnxt/bnxt_debugfs.c:69:30: warning: '%d' directive output may be truncated writing between 1 and 11 bytes into a region of size 10 [-Wformat-truncation=] 69 | snprintf(qname, 10, "%d", ring_idx); | ^~ In function 'debugfs_dim_ring_init', inlined from 'bnxt_debug_dev_init' at .../bnxt_debugfs.c:87:4: .../bnxt_debugfs.c:69:29: note: directive argument in the range [-2147483643, 2147483646] 69 | snprintf(qname, 10, "%d", ring_idx); | ^~~~ .../bnxt_debugfs.c:69:9: note: 'snprintf' output between 2 and 12 bytes into a destination of size 10 69 | snprintf(qname, 10, "%d", ring_idx); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Compile tested only Signed-off-by: Simon Horman <horms@kernel.org> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20240813-bnxt-str-v2-2-872050a157e7@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-14bnxt_en: Extend maximum length of version string by 1 byteSimon Horman
This corrects an out-by-one error in the maximum length of the package version string. The size argument of snprintf includes space for the trailing '\0' byte, so there is no need to allow extra space for it by reducing the value of the size argument by 1. Found by inspection. Compile tested only. Signed-off-by: Simon Horman <horms@kernel.org> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20240813-bnxt-str-v2-1-872050a157e7@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-14net: ethernet: dlink: replace deprecated macroMoon Yeounsu
Macro `SIMPLE_DEV_PM_OPS()` is deprecated. This patch replaces `SIMPLE_DEV_PM_OPS()` with `DEFINE_SIMPLE_DEV_PM_OPS()` currently used. Expanded results are the same since remaining member is initialized as zero (NULL): static SIMPLE_DEV_PM_OPS(rio_pm_ops, rio_suspend, rio_resume); Expanded to: static const struct dev_pm_ops __attribute__((__unused__)) rio_pm_ops = { .suspend = ((1) ? ((rio_suspend)) : ((void *)0)), .resume = ((1) ? ((rio_resume)) : ((void *)0)), .freeze = ((1) ? ((rio_suspend)) : ((void *)0)), .thaw = ((1) ? ((rio_resume)) : ((void *)0)), .poweroff = ((1) ? ((rio_suspend)) : ((void *)0)), .restore = ((1) ? ((rio_resume)) : ((void *)0)), }; static DEFINE_SIMPLE_DEV_PM_OPS(rio_pm_ops, rio_suspend, rio_resume); Expanded to: static const struct dev_pm_ops rio_pm_ops = { .suspend = ((1) ? ((rio_suspend)) : ((void *)0)), .resume = ((1) ? ((rio_resume)) : ((void *)0)), .freeze = ((1) ? ((rio_suspend)) : ((void *)0)), .thaw = ((1) ? ((rio_resume)) : ((void *)0)), .poweroff = ((1) ? ((rio_suspend)) : ((void *)0)), .restore = ((1) ? ((rio_resume)) : ((void *)0)), .runtime_suspend = ((void *)0), .runtime_resume = ((void *)0), .runtime_idle = ((void *)0), }; Signed-off-by: Moon Yeounsu <yyyynoom@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-08-13net: dsa: microchip: ksz9477: unwrap URL in commentEnguerrand de Ribaucourt
Keep the URL in a single line for easier copy-pasting. Signed-off-by: Enguerrand de Ribaucourt <enguerrand.de-ribaucourt@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com> Link: https://patch.msgid.link/20240812124346.597702-1-enguerrand.de-ribaucourt@savoirfairelinux.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-13net: mvneta: Use __be16 for l3_proto parameter of mvneta_txq_desc_csum()Simon Horman
The value passed as the l3_proto argument of mvneta_txq_desc_csum() is __be16. And mvneta_txq_desc_csum uses this parameter as a __be16 value. So use __be16 as the type for the parameter, rather than type with host byte order. Flagged by Sparse as: .../mvneta.c:1796:25: warning: restricted __be16 degrades to integer .../mvneta.c:1979:45: warning: incorrect type in argument 2 (different base types) .../mvneta.c:1979:45: expected int l3_proto .../mvneta.c:1979:45: got restricted __be16 [usertype] l3_proto No functional change intended. Flagged by Sparse. Signed-off-by: Simon Horman <horms@kernel.org> Reviewed-by: Marcin Wojtas <marcin.s.wojtas@gmail.com> Link: https://patch.msgid.link/20240812-mvneta-be16-v1-1-e1ea12234230@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-13net: fec: Remove duplicated codeCsókás, Bence
`fec_ptp_pps_perout()` reimplements logic already in `fec_ptp_read()`. Replace with function call. Signed-off-by: Csókás, Bence <csokas.bence@prolan.hu> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20240812094713.2883476-2-csokas.bence@prolan.hu Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-13net: fec: Move `fec_ptp_read()` to the top of the fileCsókás, Bence
This function is used in `fec_ptp_enable_pps()` through struct cyclecounter read(). Moving the declaration makes it clearer, what's happening. Suggested-by: Frank Li <Frank.li@nxp.com> Link: https://lore.kernel.org/netdev/20240805144754.2384663-1-csokas.bence@prolan.hu/T/#ma6c21ad264016c24612048b1483769eaff8cdf20 Signed-off-by: Csókás, Bence <csokas.bence@prolan.hu> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20240812094713.2883476-1-csokas.bence@prolan.hu Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-13net: netconsole: Constify struct config_item_typeChristophe JAILLET
'struct config_item_type' is not modified in this driver. This structure is only used with config_group_init_type_name() which takes a const struct config_item_type* as a 3rd argument. This also makes things consistent with 'netconsole_target_type' witch is already const. Constifying this structure moves some data to a read-only section, so increase overall security, especially when the structure holds some function pointers. On a x86_64, with allmodconfig: Before: ====== text data bss dec hex filename 33007 3952 1312 38271 957f drivers/net/netconsole.o After: ===== text data bss dec hex filename 33071 3888 1312 38271 957f drivers/net/netconsole.o Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Breno Leitao <leitao@debian.org> Link: https://patch.msgid.link/9c205b2b4bdb09fc9e9d2cb2f2936ec053da1b1b.1723325900.git.christophe.jaillet@wanadoo.fr Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-13gve: Add RSS adminq commands and ethtool supportJeroen de Borst
Introduce adminq commands to configure and retrieve RSS settings from the device. Implement corresponding ethtool ops for user-level management. Signed-off-by: Jeroen de Borst <jeroendb@google.com> Co-developed-by: Ziwei Xiao <ziweixiao@google.com> Signed-off-by: Ziwei Xiao <ziweixiao@google.com> Signed-off-by: Praveen Kaligineedi <pkaligineedi@google.com> Reviewed-by: Praveen Kaligineedi <pkaligineedi@google.com> Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Hariprasad Kelam <hkelam@marvell.com> Link: https://patch.msgid.link/20240812222013.1503584-3-pkaligineedi@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-13gve: Add RSS device optionZiwei Xiao
Add a device option to inform the driver about the hash key size and hash table size used by the device. This information will be stored and made available for RSS ethtool operations. Signed-off-by: Ziwei Xiao <ziweixiao@google.com> Signed-off-by: Praveen Kaligineedi <pkaligineedi@google.com> Reviewed-by: Praveen Kaligineedi <pkaligineedi@google.com> Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20240812222013.1503584-2-pkaligineedi@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-13iavf: add support for offloading tc U32 cls filtersAhmed Zaki
Add support for offloading cls U32 filters. Only "skbedit queue_mapping" and "drop" actions are supported. Also, only "ip" and "802_3" tc protocols are allowed. The PF must advertise the VIRTCHNL_VF_OFFLOAD_TC_U32 capability flag. Since the filters will be enabled via the FD stage at the PF, a new type of FDIR filters is added and the existing list and state machine are used. The new filters can be used to configure flow directors based on raw (binary) pattern in the rx packet. Examples: 0. # tc qdisc add dev enp175s0v0 ingress 1. Redirect UDP from src IP 192.168.2.1 to queue 12: # tc filter add dev <dev> protocol ip ingress u32 \ match u32 0x45000000 0xff000000 at 0 \ match u32 0x00110000 0x00ff0000 at 8 \ match u32 0xC0A80201 0xffffffff at 12 \ match u32 0x00000000 0x00000000 at 24 \ action skbedit queue_mapping 12 skip_sw 2. Drop all ICMP: # tc filter add dev <dev> protocol ip ingress u32 \ match u32 0x45000000 0xff000000 at 0 \ match u32 0x00010000 0x00ff0000 at 8 \ match u32 0x00000000 0x00000000 at 24 \ action drop skip_sw 3. Redirect ICMP traffic from MAC 3c:fd:fe:a5:47:e0 to queue 7 (note proto: 802_3): # tc filter add dev <dev> protocol 802_3 ingress u32 \ match u32 0x00003CFD 0x0000ffff at 4 \ match u32 0xFEA547E0 0xffffffff at 8 \ match u32 0x08004500 0xffffff00 at 12 \ match u32 0x00000001 0x000000ff at 20 \ match u32 0x0000 0x0000 at 40 \ action skbedit queue_mapping 7 skip_sw Notes on matches: 1 - All intermediate fields that are needed to parse the correct PTYPE must be provided (in e.g. 3: Ethernet Type 0x0800 in MAC, IP version and IP length: 0x45 and protocol: 0x01 (ICMP)). 2 - The last match must provide an offset that guarantees all required headers are accounted for, even if the last header is not matched. For example, in #2, the last match is 4 bytes at offset 24 starting from IP header, so the total is 14 (MAC) + 24 + 4 = 42, which is the sum of MAC+IP+ICMP headers. Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com> Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-08-13iavf: refactor add/del FDIR filtersAhmed Zaki
In preparation for a second type of FDIR filters that can be added by tc-u32, move the add/del of the FDIR logic to be entirely contained in iavf_fdir.c. The iavf_find_fdir_fltr_by_loc() is renamed to iavf_find_fdir_fltr() to be more agnostic to the filter ID parameter (for now @loc, which is relevant only to current FDIR filters added via ethtool). The FDIR filter deletion is moved from iavf_del_fdir_ethtool() in ethtool.c to iavf_fdir_del_fltr(). While at it, fix a minor bug where the "fltr" is accessed out of the fdir_fltr_lock spinlock protection. Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com> Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-08-13ice: enable FDIR filters from raw binary patterns for VFsJunfeng Guo
Enable VFs to create FDIR filters from raw binary patterns. The corresponding processes for raw flow are added in the Parse / Create / Destroy stages. Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com> Signed-off-by: Junfeng Guo <junfeng.guo@intel.com> Co-developed-by: Ahmed Zaki <ahmed.zaki@intel.com> Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-08-13ice: add method to disable FDIR SWAP optionJunfeng Guo
The SWAP Flag in the FDIR Programming Descriptor doesn't work properly, it is always set and cannot be unset (hardware bug). Thus, add a method to effectively disable the FDIR SWAP option by setting the FDSWAP instead of FDINSET registers. Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com> Signed-off-by: Junfeng Guo <junfeng.guo@intel.com> Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-08-13ice: add API for parser profile initializationJunfeng Guo
Add API ice_parser_profile_init() to init a parser profile based on a parser result and a mask buffer. The ice_parser_profile struct is used by the low level FXP engine to create HW profile/field vectors. Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com> Signed-off-by: Qi Zhang <qi.z.zhang@intel.com> Signed-off-by: Junfeng Guo <junfeng.guo@intel.com> Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-29 03:02:27 +0000