| Age | Commit message (Collapse) | Author |
|---|
|
The function alloc_workqueue() in rtw_core_init() can fail, but
there is no check of its return value. To fix this bug, its return value
should be checked with new error handling code.
Fixes: fe101716c7c9d ("rtw88: replace tx tasklet with work queue")
Reported-by: Hacash Robot <hacashRobot@santino.com>
Signed-off-by: William Dean <williamsukatube@gmail.com>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220723063756.2956189-1-williamsukatube@163.com
|
|
SER (system error recovery) L1 (level 1) has a step-by-step handshake
process with FW. These handshakes still rely on B_AX_HS0ISR_IND_INT_EN.
So, even already during recovery, we enable this bit in IMR.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220721074952.19676-1-pkshih@realtek.com
|
|
Update to internal tag HALRF_027_00_060.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220622091937.11325-1-pkshih@realtek.com
|
|
Add in the ability to easily find the firmware feature bits reported in the
get feature exchange without having to compile-in debug prints.
root@linaro-alip:~# cat /sys/kernel/debug/ieee80211/phy0/wcn36xx/firmware_feat_caps
MCC
P2P
DOT11AC
SLM_SESSIONIZATION
DOT11AC_OPMODE
SAP32STA
TDLS
P2P_GO_NOA_DECOUPLE_INIT_SCAN
WLANACTIVE_OFFLOAD
BEACON_OFFLOAD
SCAN_OFFLOAD
BCN_MISS_OFFLOAD
STA_POWERSAVE
STA_ADVANCED_PWRSAVE
BCN_FILTER
RTT
RATECTRL
WOW
WLAN_ROAM_SCAN_OFFLOAD
SPECULATIVE_PS_POLL
IBSS_HEARTBEAT_OFFLOAD
WLAN_SCAN_OFFLOAD
WLAN_PERIODIC_TX_PTRN
ADVANCE_TDLS
BATCH_SCAN
FW_IN_TX_PATH
EXTENDED_NSOFFLOAD_SLOT
CH_SWITCH_V1
HT40_OBSS_SCAN
UPDATE_CHANNEL_LIST
WLAN_MCADDR_FLT
WLAN_CH144
TDLS_SCAN_COEXISTENCE
LINK_LAYER_STATS_MEAS
MU_MIMO
EXTENDED_SCAN
DYNAMIC_WMM_PS
MAC_SPOOFED_SCAN
FW_STATS
WPS_PRBRSP_TMPL
BCN_IE_FLT_DELTA
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220727161655.2286867-5-bryan.odonoghue@linaro.org
|
|
firmware.c
Move wcn36xx_get_cap_name() function in main.c into firmware.c as
wcn36xx_firmware_get_cap_name().
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220727161655.2286867-4-bryan.odonoghue@linaro.org
|
|
The naming of the get/set/clear firmware feature capability bits doesn't
really follow the established namespace pattern of
wcn36xx_logicalblock_do_something();
The feature bits are accessed by smd.c and main.c. It would be nice to
display the found feature bits in debugfs. To do so though we should tidy
up the namespace a bit.
Move the firmware feature exchange API to its own file - firmware.c giving
us the opportunity to functionally decompose other firmware related
accessors as appropriate in future.
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220727161655.2286867-3-bryan.odonoghue@linaro.org
|
|
The enum name "place_holder_in_cap_bitmap" is self descriptively asking to
be changed to something else.
Rename place_holder_in_cap_bitmap to wcn36xx_firmware_feat_caps so that the
contents and intent of the enum is obvious.
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220727161655.2286867-2-bryan.odonoghue@linaro.org
|
|
The previous patch ("netdevsim: fib: Fix reference count leak on route
deletion failure") fixed a reference count leak that happens on route
deletion failure.
Such failures can only be simulated by injecting slab allocation
failures, which cannot be surgically injected.
In order to be able to specifically test this scenario, add a debugfs
knob that allows user space to fail route deletion requests when
enabled.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As part of FIB offload simulation, netdevsim stores IPv4 and IPv6 routes
and holds a reference on FIB info structures that in turn hold a
reference on the associated nexthop device(s).
In the unlikely case where we are unable to allocate memory to process a
route deletion request, netdevsim will not release the reference from
the associated FIB info structure, thereby preventing the associated
nexthop device(s) from ever being removed [1].
Fix this by scheduling a work item that will flush netdevsim's FIB table
upon route deletion failure. This will cause netdevsim to release its
reference from all the FIB info structures in its table.
Reported by Lucas Leong of Trend Micro Zero Day Initiative.
Fixes: 0ae3eb7b4611 ("netdevsim: fib: Perform the route programming in a non-atomic context")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Convert mtk_eth_soc driver to xdp_return_frame_bulk APIs.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add the capability to map non-linear xdp frames in XDP_TX and
ndo_xdp_xmit callback.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This is a preliminary patch to add xdp multi-frag support to mtk_eth_soc
driver
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit '2c5a5748105a ("vmxnet3: add support for out of order rx
completion")' added support for out of order rx completion. Within
that patch, an enhancement was done to reschedule napi for processing
rx completions.
However, it can lead to missing an interrupt. So, this patch reverts
that part of the code.
Fixes: 2c5a5748105a ("vmxnet3: add support for out of order rx completion")
Signed-off-by: Ronak Doshi <doshir@vmware.com>
Acked-by: Guolin Yang <gyang@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The 'get_ts_info' callback is used for obtaining information about
time stamping and PTP hardware clock capabilities of a network device.
The existing function of Spectrum-1 is used to advertise the PHC
capabilities and the supported RX and TX filters. Implement a similar
function for Spectrum-2, expose that the supported 'rx_filters' are all
PTP event packets, as for these packets the driver fills the time stamp
from the CQE in the SKB.
In the future, mlxsw driver will be extended to support one-step PTP in
Spectrum-2 and newer ASICs. Then additional 'tx_types' will be supported.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The SIOCSHWTSTAMP ioctl configures HW timestamping on a given port. In
Spectrum-2 and above, each packet gets time stamp by default, but in
order to provide an accurate time stamp, software should configure to
update the correction field. In addition, the PTP traps are not enabled
by default, software should enable it per port or for all ports.
The switch behaves like a transparent clock between CPU port and each
front panel port. If ingress correction is set on a port for a given packet
type, then when such a packet is received via the port, the current time
stamp is subtracted from the correction field. If egress correction is set
on a port for a given packet type, then when such a packet is transmitted
via the port, the current time stamp is added to the correction field.
The result is that as the packet ingresses through a port with ingress
correction enabled, and egresses through a port with egress correction
enabled, the PTP correction field is updated to reflect the time that the
packet spent in the ASIC.
This can be used to update the correction field of trapped packets by
enabling ingress correction on a port where time stamping was enabled,
and egress correction on the CPU port. Similarly, for packets transmitted
from the host, ingress correction should be enabled on the CPU port, and
egress correction on a front-panel port.
However, since the correction fields will be updated for all PTP packets
crossing the CPU port, in order not to mangle the correction field, the
front panel port involved in the packet transfer must have the
corresponding correction enabled as well.
Therefore, when HW timestamping is enabled on at least one port, we have
to configure hardware to update the correction field and trap PTP event
packets on all ports.
Add reference count as part of 'struct mlxsw_sp_ptp_state', to maintain
how many ports use HW timestamping. Handle the correction field
configuration only when the first port enables time stamping and when the
last port disables time stamping. Store the configuration as part of
'struct mlxsw_sp_ptp_state', as it is global for all ports.
The SIOCGHWTSTAMP ioctl is a getter for the current configuration,
implement it and use the global configuration.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As opposed to Spectrum-1, in which time stamps arrive through a pair of
dedicated events into a queue and later are being matched to the
corresponding packets, in Spectrum-2 we are reading the time stamps
directly from the CQE. Software can get the time stamp in UTC format
using CQEv2.
Add a time stamp field to 'struct mlxsw_skb_cb'. In
mlxsw_pci_cqe_{rdq,sdq}_handle() extract the time stamp from the CQE into
the new time stamp field. Note that the time stamp in the CQE is
represented by 38 bits, which is a short representation of UTC time.
Software should create the full time stamp using the global UTC clock.
Read UTC clock from hardware only for PTP packets which were trapped to CPU
with PTP0 trap ID (event packets).
Use the time stamp from the SKB when packet is received or transmitted.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In Spectrum-2 and Spectrum-3, the correction field of PTP packets which are
sent as control packets is not updated at egress port. To overcome this
limitation, PTP packets which require time stamp, should be sent as data
packets with the following details:
1. FID valid = 1
2. FID value above the maximum FID
3. rx_router_port = 1
>From Spectrum-4 and on, this limitation will be solved.
Extend the function which handles TX header, in case that the packet is
a PTP packet, add TX header with type=data and all the above mentioned
requirements. Add operation as part of 'struct mlxsw_sp_ptp_ops', to be
able to separate the handling of PTP packets between different ASICs. Use
the data packet solution only for Spectrum-2 and Spectrum-3. Therefore, add
a dedicated operation structure for Spectrum-4, as it will be same to
Spectrum-2 in PTP implementation, just will not have the limitation of
control packets.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Implement physical hardware clock operations. The main difference between
the existing operations of Spectrum-1 and the new operations of Spectrum-2
is the usage of UTC hardware clock instead of FRC.
Add support for init() and fini() functions for PTP clock in Spectrum-2.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Query UTC sec and nsec PCI offsets during the pci_init(), to be able to
read UTC time later.
Implement functions to read UTC seconds and nanoseconds from the offset
which was read as part of initialization.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Lay the groundwork for Spectrum-2 support. On Spectrum-2, the packets get
the time stamps from the CQE, which means that the time stamp is attached
to its packet.
Configure MTPTPT to set which message types should arrive under which
PTP trap. PTP0 will be used for event message types, which means that
the packets require time stamp. PTP1 will be used for other packets.
Note that in Spectrum-2, all packets contain time stamp by default. The two
types of traps (PTP0, PTP1) will be used to separate between PTP_EVENT
traps and PTP_GENERAL traps, so then the driver will fill the time stamp as
part of the SKB only for event message types.
Later the driver will enable the traps using 'MTPCPC.ptp_trap_en' bit.
Then, PTP packets start arriving through the PTP traps.
Currently, the structure 'mlxsw_sp2_ptp_state' contains only the common
structure, the next patches will extend it.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, Tx completions are reported using Completion Queue Element
version 1 (CQEv1). These elements do not contain the Tx time stamp,
which is fine as Spectrum-1 reads Tx time stamps via a dedicated FIFO
and Spectrum-2 does not currently support PTP.
In preparation for Spectrum-2 PTP support, use CQEv2 for Spectrum-2 and
newer ASICs, as this CQE format encodes the Tx time stamp.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
MTPTPT register is used to set which message types should arrive under
which PTP trap. Currently, PTP0 is used for event message types, which
means that the packets require time stamp. PTP1 is used for other packets.
This configuration will be same for Spectrum-2 and newer ASICs. In
preparation for Spectrum-2 PTP support, add helper functions to
configure PTP traps and use them for Spectrum-1. These functions will be
used later also for Spectrum-2.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Aside of urb->transfer_buffer_length and urb->context which might
change in the TX path, all the other URB parameters remains constant
during runtime. So, there is no reasons to call usb_fill_bulk_urb()
each time before submitting an URB.
Make sure to initialize all the fields of the URB at allocation
time. For the TX branch, replace the call usb_fill_bulk_urb() by an
assignment of urb->context. urb->urb->transfer_buffer_length is
already set by the caller functions, no need to set it again. For the
RX branch, because all parameters are unchanged, simply remove the
call to usb_fill_bulk_urb().
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20220729080902.25839-1-mailhol.vincent@wanadoo.fr
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The same function to read the switch id is used by drivers based on
qca8k family switch. Move them to common code to make them accessible
also by other drivers.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The same port LAG functions are used by drivers based on qca8k family
switch. Move them to common code to make them accessible also by other
drivers.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The same port VLAN functions are used by drivers based on qca8k family
switch. Move them to common code to make them accessible also by other
drivers.
Also drop exposing busy_wait and make it static.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The same port mirror functions are used by drivers based on qca8k family
switch. Move them to common code to make them accessible also by other
drivers.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The same port FDB/MDB function are used by drivers based on qca8k family
switch. Move them to common code to make them accessible also by other
drivers.
Also drop bulk read/write functions and make them static
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The same set age, MTU and port enable/disable function are used by
driver based on qca8k family switch.
Move them to common code to make them accessible also by other drivers.
While at it also drop unnecessary qca8k_priv cast for void pointers.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The same bridge functions are used by drivers based on qca8k family
switch. Move them to common code to make them accessible also by other
drivers.
While at it also drop unnecessary qca8k_priv cast for void pointers.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The same logic to disable/enable port, set eee and get ethtool stats is
used by drivers based on qca8k family switch.
Move it to common code to make it accessible also by other drivers.
While at it also drop unnecessary qca8k_priv cast for void pointers.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The same mib function is used by drivers based on qca8k family switch.
Move it to common code to make it accessible also by other drivers.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The same ATU function are used by drivers based on qca8k family switch.
Move the bulk read/write helper to common code to declare these shared
ATU functions in common code.
These helper will be dropped when regmap correctly support bulk
read/write.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The same reg table and read/write/rmw function are used by drivers
based on qca8k family switch.
Move them to common code to make it accessible also by other drivers.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The same MIB struct is used by drivers based on qca8k family switch. Move
it to common code to make it accessible also by other drivers.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some switch may not support mib autocast feature and require the legacy
way of reading the regs directly.
Make the mib autocast feature optional and permit to declare support for
it using match_data struct in a dedicated qca8k_info_ops struct.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Using of_device_get_match_data is expensive. Cache match data to speed
up access and rework user of match data to use the new cached value.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Correct spelling on 'non-existent' in comment
Signed-off-by: Ruffalo Lavoisier <RuffaloLavoisier@gmail.com>
Link: https://lore.kernel.org/r/20220728032854.151180-1-RuffaloLavoisier@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix following includecheck warning:
./drivers/net/ethernet/mellanox/mlxsw/core_linecard_dev.c: linux/err.h is included more than once.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20220727233801.23781-1-yang.lee@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Let the core take the devlink instance lock around health callbacks and
remove the now redundant locking in the drivers.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Change devlink instance locks in mlx5 driver to have devlink health
recovery callback locked, while keeping all driver paths which lead to
devl_ API functions called by the driver locked.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Change devlink instance locks in mlx4 driver to have devlink reload
callback locked, while keeping all driver paths which leads to devl_ API
functions called by the mlx4 driver locked.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use devl_ API to call devl_port_register() and devl_port_unregister()
instead of devlink_port_register() and devlink_port_unregister(). Add
devlink instance lock in mlx4 driver paths to these functions.
This will be used by the downstream patch to invoke mlx4 devlink reload
callbacks with devlink lock held.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use devl_ API to call devl_region_create() and devl_region_destroy()
instead of devlink_region_create() and devlink_region_destroy().
Add devlink instance lock in mlx4 driver paths to these functions.
This will be used by the downstream patch to invoke mlx4 devlink reload
callbacks with devlink lock held.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Change devlink instance locks in mlx5 driver to have devlink reload
callbacks locked, while keeping all driver paths which lead to devl_ API
functions called by the driver locked.
Add mlx5_load_one_devl_locked() and mlx5_unload_one_devl_locked() which
are used by the paths which are already locked such as devlink reload
callbacks.
This patch makes the driver use devl_ API also for traps register as
these functions are called from the driver paths parallel to reload that
requires locking now.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Refactor fw reset code to have the unload driver part done on
mlx5_fw_reset_complete_reload(), so if it was called by the PF which
initiated the reload fw activate flow, the unload part will be handled
by the mlx5_devlink_reload_fw_activate() callback itself and not by the
reset event work.
This will be used by the downstream patch to invoke devlink reload
callbacks with devlink lock held.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add callbacks
=============
.selftest_check: returns true for flash selftest.
.selftest_run: runs a flash selftest.
Also, refactor NVM APIs so that they can be
used with devlink and ethtool both.
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Let the TLS TX recycle pool be more flexible in size, by continuously
and dynamically allocating and releasing HW resources in response to
changes in the connections rate and load.
Allocate and release pool entries in bulks (16). Use a workqueue to
release/allocate in the background. Allocate a new bulk when the pool
size goes lower than the low threshold (1K). Symmetric operation is done
when the pool size gets greater than the upper threshold (4K).
Every idle pool entry holds: 1 TIS, 1 DEK (HW resources), in addition to
~100 bytes in host memory.
Start with an empty pool to minimize memory and HW resources waste for
non-TLS users that have the device-offload TLS enabled.
Upon a new request, in case the pool is empty, do not wait for a whole bulk
allocation to complete. Instead, trigger an instant allocation of a single
resource to reduce latency.
Performance tests:
Before: 11,684 CPS
After: 16,556 CPS
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The transport interface send (TIS) object is responsible for performing
all transport related operations of the transmit side. The ConnectX HW
uses a TIS object to save and access the TLS crypto information and state
of an offloaded TX kTLS connection.
Before this patch, we used to create a new TIS per connection and destroy
it once it’s closed. Every create and destroy of a TIS is a FW command.
Same applies for the private TLS context, where we used to dynamically
allocate and free it per connection.
Resources recycling reduce the impact of the allocation/free operations
and helps speeding up the connection rate.
In this feature we maintain a pool of TX objects and use it to recycle
the resources instead of re-creating them per connection.
A cached TIS popped from the pool is updated to serve the new connection
via the fast-path HW interface, updating the tls static and progress
params. This is a very fast operation, significantly faster than FW
commands.
On recycling, a WQE fence is required after the context params change.
This guarantees that the data is sent after the context has been
successfully updated in hardware, and that the context modification
doesn't interfere with existing traffic.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Let the caller of mlx5e_ktls_tx_handle_ooo() take care of updating the
stats, according to the returned value. As the switch/case blocks are
already there, this change saves unnecessary branches in the handler.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
