summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2018-05-30iwlwifi: mvm: honor the max_amsdu_subframes limitEmmanuel Grumbach
A peer can limit the number of subframes it can handle in a single A-MSDU. Honor this limit. Note that the smallest limit is 8, and we are very unlikely to reach that limit. So this isn't really a big deal. Fixes: a6d5e32f247c ("iwlwifi: mvm: send large SKBs to the transport") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-05-30iwlwifi: mvm: open BA session only when sta is authorizedGregory Greenman
Currently, a BA session is opened when the tx traffic exceeds 10 frames per second. As a result of inter-op problems with some APs, add a condition to open BA session only when station is already authorized. Fixes: 482e48440a0e ("iwlwifi: mvm: change open and close criteria of a BA session") Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-05-30iwlwifi: mvm: remove division by size of sizeof(struct ieee80211_wmm_rule)Colin Ian King
The subtraction of two struct ieee80211_wmm_rule pointers leaves a result that is automatically scaled down by the size of the size of pointed-to type, hence the division by sizeof(struct ieee80211_wmm_rule) is bogus and should be removed. Detected by CoverityScan, CID#1467777 ("Extra sizeof expression") Fixes: 77e30e10ee28 ("iwlwifi: mvm: query regdb for wmm rule if needed") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-05-30iwlwifi: pcie: fix race in Rx buffer allocatorShaul Triebitz
Make sure the rx_allocator worker is canceled before running the rx_init routine. rx_init frees and re-allocates all rxb's pages. The rx_allocator worker also allocates pages for the used rxb's. Running rx_init and rx_allocator simultaniously causes a kernel panic. Fix that by canceling the work in rx_init. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-05-30iwlwifi: mvm: fix TSO with highly fragmented SKBsEmmanuel Grumbach
Our hardware has a limited amount of buffer descriptors for each Tx packet. Because of that, there is a short piece of code that makes sure that that we don't push too many subframes in an A-MSDU because of subframes needs 2 buffer descriptors. This code also takes into account the number of fragment of the skb since we also need a buffer descriptor for each fragment in the skb. This piece of code though didn't check that the resulting number of subframes wasn't 0. A user reported that using NFS client, he could get skbs that are so fragmented that the code mentioned above returned 0 for the number of subframes making skb_gso_segment fail and subconsequently iwlwifi would WARN. Fix this by make sure that num_subframes is at least 1. This fixes: https://bugzilla.kernel.org/show_bug.cgi?id=199209 Fixes: a6d5e32f247c ("iwlwifi: mvm: send large SKBs to the transport") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-05-30iwlmvm: tdls: Check TDLS channel switch supportAviya Erenfeld
Some versions of the FW don't support channel switch in TDLS. Add a condition that checks it. Fixes: 307e47235a10 ("iwlwifi: mvm: configure TDLS peers to FW") Signed-off-by: Aviya Erenfeld <aviya.erenfeld@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-05-30iwlwifi: mvm: drop UNKNOWN security type framesSara Sharon
In some cases we may get from FW errored frames with UNKNOWN security type. This may happen in unsecured aggregation flow, where the first packet had a CRC error in the WEP bit, which was followed by a failure to decrypt and was dropped. The next frames in the aggregation "inherit" the bad metadata of the first packet. Make sure to drop such frames since RADA and other offloads will not operate correctly which may have unexpected results. In case of AP it also causes to TX AMSDU frames to the peers, resulting with assert 0x104B. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-05-29net/mlx5e: Get the number of offloaded TC rules from the correct tableOr Gerlitz
As we keep the offloaded TC rules for NIC and e-switch in two different places, make sure to return the number of offloaded flows according to the use-case and not blindly from the priv. Fixes: 655dc3d2b91b ('net/mlx5e: Use shared table for offloaded TC eswitch flows') Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reported-by: Paul Blakey <paulb@mellanox.com> Reviewed-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-05-29net/mlx5: FPGA, Call DMA unmap with the right sizeIlya Lesokhin
When mlx5_fpga_conn_unmap_buf is called buf->sg[0].size should equal the actual buffer size, not the message size. Otherwise we will trigger the following dma debug warning "DMA-API: device driver frees DMA memory with different size" Fixes: 537a50574175 ('net/mlx5: FPGA, Add high-speed connection routines') Signed-off-by: Ilya Lesokhin <ilyal@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-05-29net/mlx5: FPGA, Properly initialize dma direction on fpga conn sendIlya Lesokhin
Properly initialize dma direction on fpga conn send. Do not rely on dma_dir == 0 (DMA_BIDIRECTIONAL). Signed-off-by: Ilya Lesokhin <ilyal@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-05-29net/mlx5: FPGA, Abort FPGA init if the device reports no QP capabilityYevgeny Kliteynik
In the case that the reported max number of QPs capability equals to zero, abort FPGA init. Signed-off-by: Yevgeny Kliteynik <kliteyn@mellanox.com> Signed-off-by: Adi Nissim <adin@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-05-29net/mlx5: FPGA, print SBU identification on initIlan Tayari
Add print of the following values on init: 1. ieee vendor id 2. sandbox product id 3. sandbox product version Signed-off-by: Ilan Tayari <ilant@mellanox.com> Signed-off-by: Adi Nissim <adin@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-05-29net/mlx5: FPGA, Add device nameIlan Tayari
Add device name for Mellanox FPGA devices. Signed-off-by: Ilan Tayari <ilant@mellanox.com> Signed-off-by: Adi Nissim <adin@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-05-29net/mlx5: FPGA, Add doxygen for access type enumIlan Tayari
Add doxygen comments for enum mlx5_fpga_access_type. Signed-off-by: Ilan Tayari <ilant@mellanox.com> Signed-off-by: Adi Nissim <adin@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-05-29tun: Fix NULL pointer dereference in XDP redirectToshiaki Makita
Calling XDP redirection requires bh disabled. Softirq can call another XDP function and redirection functions, then the percpu static variable ri->map can be overwritten to NULL. This is a generic XDP case called from tun. [ 3535.736058] BUG: unable to handle kernel NULL pointer dereference at 0000000000000018 [ 3535.743974] PGD 0 P4D 0 [ 3535.746530] Oops: 0000 [#1] SMP PTI [ 3535.750049] Modules linked in: vhost_net vhost tap tun bridge stp llc ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter sunrpc vfat fat ext4 mbcache jbd2 intel_rapl skx_edac nfit libnvdimm x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm ipmi_ssif irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc ses aesni_intel crypto_simd cryptd enclosure hpwdt hpilo glue_helper ipmi_si pcspkr wmi mei_me ioatdma mei ipmi_devintf shpchp dca ipmi_msghandler lpc_ich acpi_power_meter sch_fq_codel ip_tables xfs libcrc32c sd_mod mgag200 i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm smartpqi i40e crc32c_intel scsi_transport_sas tg3 i2c_core ptp pps_core [ 3535.813456] CPU: 5 PID: 1630 Comm: vhost-1614 Not tainted 4.17.0-rc4 #2 [ 3535.820127] Hardware name: HPE ProLiant DL360 Gen10/ProLiant DL360 Gen10, BIOS U32 11/14/2017 [ 3535.828732] RIP: 0010:__xdp_map_lookup_elem+0x5/0x30 [ 3535.833740] RSP: 0018:ffffb4bc47bf7c58 EFLAGS: 00010246 [ 3535.839009] RAX: ffff9fdfcfea1c40 RBX: 0000000000000000 RCX: ffff9fdf27fe3100 [ 3535.846205] RDX: ffff9fdfca769200 RSI: 0000000000000000 RDI: 0000000000000000 [ 3535.853402] RBP: ffffb4bc491d9000 R08: 00000000000045ad R09: 0000000000000ec0 [ 3535.860597] R10: 0000000000000001 R11: ffff9fdf26c3ce4e R12: ffff9fdf9e72c000 [ 3535.867794] R13: 0000000000000000 R14: fffffffffffffff2 R15: ffff9fdfc82cdd00 [ 3535.874990] FS: 0000000000000000(0000) GS:ffff9fdfcfe80000(0000) knlGS:0000000000000000 [ 3535.883152] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3535.888948] CR2: 0000000000000018 CR3: 0000000bde724004 CR4: 00000000007626e0 [ 3535.896145] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 3535.903342] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 3535.910538] PKRU: 55555554 [ 3535.913267] Call Trace: [ 3535.915736] xdp_do_generic_redirect+0x7a/0x310 [ 3535.920310] do_xdp_generic.part.117+0x285/0x370 [ 3535.924970] tun_get_user+0x5b9/0x1260 [tun] [ 3535.929279] tun_sendmsg+0x52/0x70 [tun] [ 3535.933237] handle_tx+0x2ad/0x5f0 [vhost_net] [ 3535.937721] vhost_worker+0xa5/0x100 [vhost] [ 3535.942030] kthread+0xf5/0x130 [ 3535.945198] ? vhost_dev_ioctl+0x3b0/0x3b0 [vhost] [ 3535.950031] ? kthread_bind+0x10/0x10 [ 3535.953727] ret_from_fork+0x35/0x40 [ 3535.957334] Code: 0e 74 15 83 f8 10 75 05 e9 49 aa b3 ff f3 c3 0f 1f 80 00 00 00 00 f3 c3 e9 29 9d b3 ff 66 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 <8b> 47 18 83 f8 0e 74 0d 83 f8 10 75 05 e9 49 a9 b3 ff 31 c0 c3 [ 3535.976387] RIP: __xdp_map_lookup_elem+0x5/0x30 RSP: ffffb4bc47bf7c58 [ 3535.982883] CR2: 0000000000000018 [ 3535.987096] ---[ end trace 383b299dd1430240 ]--- [ 3536.131325] Kernel panic - not syncing: Fatal exception [ 3536.137484] Kernel Offset: 0x26a00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) [ 3536.281406] ---[ end Kernel panic - not syncing: Fatal exception ]--- And a kernel with generic case fixed still panics in tun driver XDP redirect, because it disabled only preemption, but not bh. [ 2055.128746] BUG: unable to handle kernel NULL pointer dereference at 0000000000000018 [ 2055.136662] PGD 0 P4D 0 [ 2055.139219] Oops: 0000 [#1] SMP PTI [ 2055.142736] Modules linked in: vhost_net vhost tap tun bridge stp llc ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter sunrpc vfat fat ext4 mbcache jbd2 intel_rapl skx_edac nfit libnvdimm x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc ses aesni_intel ipmi_ssif crypto_simd enclosure cryptd hpwdt glue_helper ioatdma hpilo wmi dca pcspkr ipmi_si acpi_power_meter ipmi_devintf shpchp mei_me ipmi_msghandler mei lpc_ich sch_fq_codel ip_tables xfs libcrc32c sd_mod mgag200 i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm i40e smartpqi tg3 scsi_transport_sas crc32c_intel i2c_core ptp pps_core [ 2055.206142] CPU: 6 PID: 1693 Comm: vhost-1683 Tainted: G W 4.17.0-rc5-fix-tun+ #1 [ 2055.215011] Hardware name: HPE ProLiant DL360 Gen10/ProLiant DL360 Gen10, BIOS U32 11/14/2017 [ 2055.223617] RIP: 0010:__xdp_map_lookup_elem+0x5/0x30 [ 2055.228624] RSP: 0018:ffff998b07607cc0 EFLAGS: 00010246 [ 2055.233892] RAX: ffff8dbd8e235700 RBX: ffff8dbd8ff21c40 RCX: 0000000000000004 [ 2055.241089] RDX: ffff998b097a9000 RSI: 0000000000000000 RDI: 0000000000000000 [ 2055.248286] RBP: 0000000000000000 R08: 00000000000065a8 R09: 0000000000005d80 [ 2055.255483] R10: 0000000000000040 R11: ffff8dbcf0100000 R12: ffff998b097a9000 [ 2055.262681] R13: ffff8dbd8c98c000 R14: 0000000000000000 R15: ffff998b07607d78 [ 2055.269879] FS: 0000000000000000(0000) GS:ffff8dbd8ff00000(0000) knlGS:0000000000000000 [ 2055.278039] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2055.283834] CR2: 0000000000000018 CR3: 0000000c0c8cc005 CR4: 00000000007626e0 [ 2055.291030] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 2055.298227] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 2055.305424] PKRU: 55555554 [ 2055.308153] Call Trace: [ 2055.310624] xdp_do_redirect+0x7b/0x380 [ 2055.314499] tun_get_user+0x10fe/0x12a0 [tun] [ 2055.318895] tun_sendmsg+0x52/0x70 [tun] [ 2055.322852] handle_tx+0x2ad/0x5f0 [vhost_net] [ 2055.327337] vhost_worker+0xa5/0x100 [vhost] [ 2055.331646] kthread+0xf5/0x130 [ 2055.334813] ? vhost_dev_ioctl+0x3b0/0x3b0 [vhost] [ 2055.339646] ? kthread_bind+0x10/0x10 [ 2055.343343] ret_from_fork+0x35/0x40 [ 2055.346950] Code: 0e 74 15 83 f8 10 75 05 e9 e9 aa b3 ff f3 c3 0f 1f 80 00 00 00 00 f3 c3 e9 c9 9d b3 ff 66 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 <8b> 47 18 83 f8 0e 74 0d 83 f8 10 75 05 e9 e9 a9 b3 ff 31 c0 c3 [ 2055.366004] RIP: __xdp_map_lookup_elem+0x5/0x30 RSP: ffff998b07607cc0 [ 2055.372500] CR2: 0000000000000018 [ 2055.375856] ---[ end trace 2a2dcc5e9e174268 ]--- [ 2055.523626] Kernel panic - not syncing: Fatal exception [ 2055.529796] Kernel Offset: 0x2e000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) [ 2055.677539] ---[ end Kernel panic - not syncing: Fatal exception ]--- v2: - Removed preempt_disable/enable since local_bh_disable will prevent preemption as well, feedback from Jason Wang. Fixes: 761876c857cb ("tap: XDP support") Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29be2net: Fix error detection logic for BE3Suresh Reddy
Check for 0xE00 (RECOVERABLE_ERR) along with ARMFW UE (0x0) in be_detect_error() to know whether the error is valid error or not Fixes: 673c96e5a ("be2net: Fix UE detection logic for BE3") Signed-off-by: Suresh Reddy <suresh.reddy@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29net: qmi_wwan: Add Netgear Aircard 779SJosh Hill
Add support for Netgear Aircard 779S Signed-off-by: Josh Hill <josh@joshuajhill.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29mlxsw: pci: Utilize MRSR register to perform FW resetJiri Pirko
So far, the PCI BAR0 register is used for triggering FW reset. However, that is a legacy attitude and it is recommended to use MRSR to perform reset instead. So do that. Move the reset into init() function as the cmd interface needs to be used. With that, IRQ initialization needs to be moved as well. As a side effect, the reset move simplifies the devlink reload flow. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29mlxsw: cmd: Handle error after reset gracefullyJiri Pirko
There is an exception in command interface processing in case the MRSR register is written to. The register triggers FW reset and during the reset FW returns an error. So handle this by ignoring this error while writing to MRSR register. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29mlxsw: reg: Add Management Reset and Shutdown RegisterJiri Pirko
Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29mlxsw: spectrum: Forbid creation of VLAN 1 over port/LAGPetr Machata
VLAN 1 is internally used for untagged traffic. Prevent creation of explicit netdevice for that VLAN, because that currently isn't supported and leads to the NULL pointer dereference cited below. Fix by preventing creation of VLAN devices with VID of 1 over mlxsw devices or LAG devices that involve mlxsw devices. [ 327.175816] ================================================================================ [ 327.184544] UBSAN: Undefined behaviour in drivers/net/ethernet/mellanox/mlxsw/spectrum_fid.c:200:12 [ 327.193667] member access within null pointer of type 'const struct mlxsw_sp_fid' [ 327.201226] CPU: 0 PID: 8983 Comm: ip Not tainted 4.17.0-rc4-petrm_net_ip6gre_headroom-custom-140 #11 [ 327.210496] Hardware name: Mellanox Technologies Ltd. "MSN2410-CB2F"/"SA000874", BIOS 4.6.5 03/08/2016 [ 327.219872] Call Trace: [ 327.222384] dump_stack+0xc3/0x12b [ 327.234007] ubsan_epilogue+0x9/0x49 [ 327.237638] ubsan_type_mismatch_common+0x1f9/0x2d0 [ 327.255769] __ubsan_handle_type_mismatch+0x90/0xa7 [ 327.264716] mlxsw_sp_fid_type+0x35/0x50 [mlxsw_spectrum] [ 327.270255] mlxsw_sp_port_vlan_router_leave+0x46/0xc0 [mlxsw_spectrum] [ 327.277019] mlxsw_sp_inetaddr_port_vlan_event+0xe1/0x340 [mlxsw_spectrum] [ 327.315031] mlxsw_sp_netdevice_vrf_event+0xa8/0x100 [mlxsw_spectrum] [ 327.321626] mlxsw_sp_netdevice_event+0x276/0x430 [mlxsw_spectrum] [ 327.367863] notifier_call_chain+0x4c/0x150 [ 327.372128] __netdev_upper_dev_link+0x1b3/0x260 [ 327.399450] vrf_add_slave+0xce/0x170 [vrf] [ 327.403703] do_setlink+0x658/0x1d70 [ 327.508998] rtnl_newlink+0x908/0xf20 [ 327.559128] rtnetlink_rcv_msg+0x50c/0x720 [ 327.571720] netlink_rcv_skb+0x16a/0x1f0 [ 327.583450] netlink_unicast+0x2ca/0x3e0 [ 327.599305] netlink_sendmsg+0x3e2/0x7f0 [ 327.616655] sock_sendmsg+0x76/0xc0 [ 327.620207] ___sys_sendmsg+0x494/0x5d0 [ 327.666117] __sys_sendmsg+0xc2/0x130 [ 327.690953] do_syscall_64+0x66/0x370 [ 327.694677] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 327.699782] RIP: 0033:0x7f4c2f3f8037 [ 327.703393] RSP: 002b:00007ffe8c389708 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 327.711035] RAX: ffffffffffffffda RBX: 000000005b03f53e RCX: 00007f4c2f3f8037 [ 327.718229] RDX: 0000000000000000 RSI: 00007ffe8c389760 RDI: 0000000000000003 [ 327.725431] RBP: 00007ffe8c389760 R08: 0000000000000000 R09: 00007f4c2f443630 [ 327.732632] R10: 00000000000005eb R11: 0000000000000246 R12: 0000000000000000 [ 327.739833] R13: 00000000006774e0 R14: 00007ffe8c3897e8 R15: 0000000000000000 [ 327.747096] ================================================================================ Fixes: 9589a7b5d7d9 ("mlxsw: spectrum: Handle VLAN devices linking / unlinking") Suggested-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29net: qcom/emac: fix device tree initializationTimur Tabi
Commit "net: qcom/emac: Encapsulate sgmii ops under one structure" introduced the sgmii_ops structure, but did not correctly initialize it on device tree platforms. This resulted in compiler warnings when ACPI is not enabled. Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29net/mlx5e: fix TLS dependencyArnd Bergmann
With CONFIG_TLS=m and MLX5_CORE_EN=y, we get a link failure: drivers/net/ethernet/mellanox/mlx5/core/en_accel/tls_rxtx.o: In function `mlx5e_tls_handle_ooo': tls_rxtx.c:(.text+0x24c): undefined reference to `tls_get_record' drivers/net/ethernet/mellanox/mlx5/core/en_accel/tls_rxtx.o: In function `mlx5e_tls_handle_tx_skb': tls_rxtx.c:(.text+0x9a8): undefined reference to `tls_device_sk_destruct' This narrows down the dependency to only allow the configurations that will actually work. The existing dependency on TLS_DEVICE is not sufficient here since MLX5_EN_TLS is a 'bool' symbol. Fixes: c83294b9efa5 ("net/mlx5e: TLS, Add Innova TLS TX support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Saeed Mahameed <saeedm@mellanox.com> Acked-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29net: remove unnecessary genlmsg_cancel() callsYueHaibing
the message be freed immediately, no need to trim it back to the previous size. Inspired by commit 7a9b3ec1e19f ("nl80211: remove unnecessary genlmsg_cancel() calls") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29nfp: abm: report correct MQ statsJakub Kicinski
Report the stat diff to make sure MQ stats add up to child stats. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29nfp: abm: multi-queue RED offloadJakub Kicinski
Add support for MQ offload and setting RED parameters on queue-by-queue basis. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29nfp: abm: expose all PF queuesJakub Kicinski
Allocate the PF representor as multi-queue to allow setting the configuration per-queue. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29nfp: abm: expose the internal stats in ethtoolJakub Kicinski
There is a handful of statistics exposing some internal details of the implementation. Expose those via ethtool. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29nfp: allow apps to add extra stats to portsJakub Kicinski
Allow nfp apps to add extra ethtool stats. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29nfp: abm: report statistics from RED offloadJakub Kicinski
Report basic and extended RED statistics back to TC. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29nfp: abm: add simple RED offloadJakub Kicinski
Offload simple RED configurations. For now support only DCTCP like scenarios where min and max are the same. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29nfp: abm: add helpers for configuring queue marking levelsJakub Kicinski
Queue levels for simple ECN marking are stored in _abi_nfd_out_q_lvls_X symbol, where X is the PCIe PF id. Find out the location of that symbol and add helpers for modifying it. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29nfp: abm: enable advanced queuing on demandJakub Kicinski
ABM NIC FW has a cut-through mode where the PCIe queuing is bypassed, thus working like our standard NIC FWs. Use this mode by default and only enable queuing in switchdev mode where users can configure it. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29nfp: prefix vNIC phys_port_name with 'n'Jakub Kicinski
Some drivers are using a bare number inside phys_port_name as VF id and OpenStack's regexps will pick it up. We can't use a bare number for your vNICs, prefix the names with 'n'. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29nfp: return -EOPNOTSUPP from .ndo_get_phys_port_name for VFsJakub Kicinski
After recent change we started returning 0 from ndo_get_phys_port_name for VFs. The name parameter for ndo_get_phys_port_name is not initialized by the stack so this can lead to a crash. We should have kept returning -EOPNOTSUPP in the first place. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29Merge tag 'mlx5e-updates-2018-05-25' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5e-updates-2018-05-25 This series includes updates for mlx5e netdev driver. 1) Allowr flow based VF vport mirroring under sriov switchdev scheme, added support for offloading the TC mirred mirror sub-action, from Chris Mi. ================= From: Or Gerlitz <ogerlitz@mellanox.com> The user will typically set the actions order such that the mirror port (mirror VF) sees packets as the original port (VF under mirroring) sent them or as it will receive them. In the general case, it means that packets are potentially sent to the mirror port before or after some actions were applied on them. To properly do that, we follow on the exact action order as set for the flow and make sure this will also be the case when we program the HW offload. If all the actions should apply before forwarding to the mirror and dest port, mirroring is just multicasting to the two vports. Otherwise, we split the TC flow to two HW rules, where the 1st applies only the actions needed up to the mirror (if there are such) and the 2nd the rest of the actions plus the forwarding to the dest vport. ================= 2) Move to order-0 only allocations (using fragmented work queues) for all work queues used by the driver, RX and TX descriptor rings (RQs, SQs and Completion Queues (CQs)), from Tariq Toukan. 3) Avoid resetting netdevice statistics on netdevice state changes, from Eran Ben Elisha. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29iwlwifi: add csr configuration for 6300 devicesGolan Ben Ami
Recently we have switched the csr addresses and values configuration from a single configuration to all devices to a per-device configuration. Doing that, the configuration for 6300 devices wasn't set. This missing definition introduced a kernel panic once trying to access the csr's. Add the missing 6300 csr configuration. While at it, add a checker that the csr values were indeed configured, and bail out more gracefully if not. Fixes: a8cbb46f831d ("iwlwifi: allow different csr flags for different device families") Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-05-29iwlwifi: pcie: compare with number of IRQs requested for, not number of CPUsHao Wei Tee
When there are 16 or more logical CPUs, we request for `IWL_MAX_RX_HW_QUEUES` (16) IRQs only as we limit to that number of IRQs, but later on we compare the number of IRQs returned to nr_online_cpus+2 instead of max_irqs, the latter being what we actually asked for. This ends up setting num_rx_queues to 17 which causes lots of out-of-bounds array accesses later on. Compare to max_irqs instead, and also add an assertion in case num_rx_queues > IWM_MAX_RX_HW_QUEUES. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=199551 Fixes: 2e5d4a8f61dc ("iwlwifi: pcie: Add new configuration to enable MSIX") Signed-off-by: Hao Wei Tee <angelsl@in04.sg> Tested-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-29Revert "rt2800: use TXOP_BACKOFF for probe frames"Stanislaw Gruszka
This reverts commit fb47ada8dc3c30c8e7b415da155742b49536c61e. In some situations when we set TXOP_BACKOFF, the probe frame is not sent at all. What it worse then sending probe frame as part of AMPDU and can degrade 11n performance to 11g rates. Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-29rtlwifi: remove duplicate codeGustavo A. R. Silva
Remove and refactor some code in order to avoid having identical code for different branches. Notice that the logic has been there since 2014. Addresses-Coverity-ID: 1426199 ("Identical code for different branches") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-29mwifiex: reserve passive scan time for radar channelXinming Hu
Active scan is not allowed on radar channel, instead using passvie scan with more time. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-29mwifiex: increase log level for internal scan fail resultXinming Hu
Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-29mwifiex: mark expected switch fall-throughsGustavo A. R. Silva
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-29mwifiex: skip sending GT_REKEY_OFFLOAD_CFG if firmware has no supportGanapathi Bhat
If firmware does not support embedded supplicant, then it in turn will not support GT rekey offloading. If this is the case, then driver must not advertise WOWLAN flags related to GTK rekey and it must also skip sending the GT_REKEY_OFFLOAD_CFG command. Signed-off-by: Shrenik Shikhare <shrenik@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Ganapathi Bhat <gbhat@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-29mwifiex: handle race during mwifiex_usb_disconnectGanapathi Bhat
Race condition is observed during rmmod of mwifiex_usb: 1. The rmmod thread will call mwifiex_usb_disconnect(), download SHUTDOWN command and do wait_event_interruptible_timeout(), waiting for response. 2. The main thread will handle the response and will do a wake_up_interruptible(), unblocking rmmod thread. 3. On getting unblocked, rmmod thread will make rx_cmd.urb = NULL in mwifiex_usb_free(). 4. The main thread will try to resubmit rx_cmd.urb in mwifiex_usb_submit_rx_urb(), which is NULL. To fix, wait for main thread to complete before calling mwifiex_usb_free(). Signed-off-by: Ganapathi Bhat <gbhat@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-29mwifiex: avoid exporting mwifiex_send_cmdGanapathi Bhat
This is a follow-up patch for commit 21c5c83ce833 ("mwifiex: support sysfs initiated device coredump"). Let us avoid exporting mwifiex_send_cmd and instead use a utility function mwifiex_fw_dump_event to achive the work. Signed-off-by: Ganapathi Bhat <gbhat@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-29rsi: fix spelling mistake "Uknown" -> "Unknown"Colin Ian King
Trivial fix to spelling mistake in rsi_dbg message text Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-29wlcore: sdio: check for valid platform device data before suspendEyal Reizer
the wl pointer can be null In case only wlcore_sdio is probed while no WiLink module is successfully probed, as in the case of mounting a wl12xx module while using a device tree file configured with wl18xx related settings. In this case the system was crashing in wl1271_suspend() as platform device data is not set. Make sure wl the pointer is valid before using it. Signed-off-by: Eyal Reizer <eyalr@ti.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-29atmel: Add missing call to pci_disable_device()YueHaibing
add pci_disable_device in error handling while init_atmel_card failed. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-29rtlwifi: fix btmpinfo timeout while processing C2H_BT_INFOPing-Ke Shih
In former patch, I enqueu all C2H commands and processed by a workqueue. In case C2H_BT_INFO will issue a H2C command to set BT reg, and wait for a C2H ack. But it is totally impossible that C2H workqueue waits for a C2H command, so kernel log warn rtlwifi: :<0> btmpinfo wait (req_num=0) timeout Since the C2H ack command C2H_BT_MP can be safely processed in interrupt context, add a fast command path to deal with the command. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-03 23:02:54 +0000