summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2016-09-27ath10k: support up to 64 vdevsBen Greear
The (1 << x) - 1 trick won't work when you are trying to fill up all 64 bits, so add special case for that. Signed-off-by: Ben Greear <greearb@candelatech.com> [kvalo@qca.qualcomm.com: remove the sentence about moving limits] Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-09-27ath10k: document cycle count related countersBen Greear
They are not necessarily named in an intuitive manner, so at least add some comments to help the next person. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-09-27ath10k: fix typo in logging messageBen Greear
Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-09-27ath10k: fix rfc1042 header retrieval in QCA4019 with eth decap modeVasanthakumar Thiagarajan
Chipset from QCA99X0 onwards (QCA99X0, QCA9984, QCA4019 & future) rx_hdr_status is not padded to align in 4-byte boundary. Define a new hw_params field to handle different alignment behaviour between different hw. This patch fixes improper retrieval of rfc1042 header with QCA4019. This patch along with "ath10k: Properly remove padding from the start of rx payload" will fix traffic failure in ethernet decap mode for QCA4019. Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-09-27ath10k: do not check if reset is NULLMasahiro Yamada
Since reset_control_get() never returns NULL, we can use IS_ERR() instead of IS_ERR_OR_NULL(). The return statements can be simpler as well. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-09-27ath10k: use devm_reset_control_get() instead of reset_control_get()Masahiro Yamada
Use the managed variant of reset_control_get() to simplify the failure path and the .remove callback. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-09-27ath10k: use devm_clk_get() instead of clk_get()Masahiro Yamada
Use the managed variant of clk_get() to simplify the failure path and the .remove callback. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-09-27ath10k: spelling and miscellaneous neateningJoe Perches
Correct some trivial comment typos. Remove unnecessary parentheses in a long line. Signed-off-by: Joe Perches <joe@perches.com> [kvalo@qca.qualcomm.com: drop the change for return] Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-09-27net: bcmgenet: use new api ethtool_{get|set}_link_ksettingsPhilippe Reynes
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-27Revert "net: ethernet: bcmgenet: use phydev from struct net_device"Florian Fainelli
This reverts commit 62469c76007e ("net: ethernet: bcmgenet: use phydev from struct net_device") because it causes GENETv1/2/3 adapters to expose the following behavior after an ifconfig down/up sequence: PING fainelli-linux (10.112.156.244): 56 data bytes 64 bytes from 10.112.156.244: seq=1 ttl=61 time=1.352 ms 64 bytes from 10.112.156.244: seq=1 ttl=61 time=1.472 ms (DUP!) 64 bytes from 10.112.156.244: seq=1 ttl=61 time=1.496 ms (DUP!) 64 bytes from 10.112.156.244: seq=1 ttl=61 time=1.517 ms (DUP!) 64 bytes from 10.112.156.244: seq=1 ttl=61 time=1.536 ms (DUP!) 64 bytes from 10.112.156.244: seq=1 ttl=61 time=1.557 ms (DUP!) 64 bytes from 10.112.156.244: seq=1 ttl=61 time=752.448 ms (DUP!) This was previously fixed by commit 5dbebbb44a6a ("net: bcmgenet: Software reset EPHY after power on") but the commit we are reverting was essentially making this previous commit void, here is why. Without commit 62469c76007e we would have the following scenario after an ifconfig down then up sequence: - bcmgenet_open() calls bcmgenet_power_up() to make sure the PHY is initialized *before* we get to initialize the UniMAC, this is critical to ensure the PHY is in a correct state, priv->phydev is valid, this code executes fine - second time from bcmgenet_mii_probe(), through the normal phy_init_hw() call (which arguably could be optimized out) Everything is fine in that case. With commit 62469c76007e, we would have the following scenario to happen after an ifconfig down then up sequence: - bcmgenet_close() calls phy_disonnect() which makes dev->phydev become NULL - when bcmgenet_open() executes again and calls bcmgenet_mii_reset() from bcmgenet_power_up() to initialize the internal PHY, the NULL check becomes true, so we do not reset the PHY, yet we keep going on and initialize the UniMAC, causing MAC activity to occur - we call bcmgenet_mii_reset() from bcmgenet_mii_probe(), but this is too late, the PHY is botched, and causes the above bogus pings/packets transmission/reception to occur Reported-by: Jaedon Shin <jaedon.shin@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-27Revert "net: ethernet: bcmgenet: use new api ethtool_{get|set}_link_ksettings"Philippe Reynes
This reverts commit 6b352ebccbcf ("net: ethernet: broadcom: bcmgenet: use new api ethtool_{get|set}_link_ksettings"). We needs to revert the commit 62469c76007e ("net: ethernet: bcmgenet: use phydev from struct net_device"), because this commit add a regression. As the commit 6b352ebccbcf ("net: ethernet: broadcom: bcmgenet: use new api ethtool_{get|set}_link_ksettings") depend on the first one, we also need to revert it first. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-27Revert "net: ethernet: bcmgenet: use phydev from struct net_device"Florian Fainelli
This reverts commit 62469c76007e ("net: ethernet: bcmgenet: use phydev from struct net_device") because it causes GENETv1/2/3 adapters to expose the following behavior after an ifconfig down/up sequence: PING fainelli-linux (10.112.156.244): 56 data bytes 64 bytes from 10.112.156.244: seq=1 ttl=61 time=1.352 ms 64 bytes from 10.112.156.244: seq=1 ttl=61 time=1.472 ms (DUP!) 64 bytes from 10.112.156.244: seq=1 ttl=61 time=1.496 ms (DUP!) 64 bytes from 10.112.156.244: seq=1 ttl=61 time=1.517 ms (DUP!) 64 bytes from 10.112.156.244: seq=1 ttl=61 time=1.536 ms (DUP!) 64 bytes from 10.112.156.244: seq=1 ttl=61 time=1.557 ms (DUP!) 64 bytes from 10.112.156.244: seq=1 ttl=61 time=752.448 ms (DUP!) This was previously fixed by commit 5dbebbb44a6a ("net: bcmgenet: Software reset EPHY after power on") but the commit we are reverting was essentially making this previous commit void, here is why. Without commit 62469c76007e we would have the following scenario after an ifconfig down then up sequence: - bcmgenet_open() calls bcmgenet_power_up() to make sure the PHY is initialized *before* we get to initialize the UniMAC, this is critical to ensure the PHY is in a correct state, priv->phydev is valid, this code executes fine - second time from bcmgenet_mii_probe(), through the normal phy_init_hw() call (which arguably could be optimized out) Everything is fine in that case. With commit 62469c76007e, we would have the following scenario to happen after an ifconfig down then up sequence: - bcmgenet_close() calls phy_disonnect() which makes dev->phydev become NULL - when bcmgenet_open() executes again and calls bcmgenet_mii_reset() from bcmgenet_power_up() to initialize the internal PHY, the NULL check becomes true, so we do not reset the PHY, yet we keep going on and initialize the UniMAC, causing MAC activity to occur - we call bcmgenet_mii_reset() from bcmgenet_mii_probe(), but this is too late, the PHY is botched, and causes the above bogus pings/packets transmission/reception to occur Reported-by: Jaedon Shin <jaedon.shin@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-27net: fec: align IP header in hardwareEric Nelson
The FEC receive accelerator (RACC) supports shifting the data payload of received packets by 16-bits, which aligns the payload (IP header) on a 4-byte boundary, which is, if not required, at least strongly suggested by the Linux networking layer. Without this patch, a huge number of alignment faults will be taken by the IP stack, as seen in /proc/cpu/alignment: ~/$ cat /proc/cpu/alignment User: 0 System: 72645 (inet_gro_receive+0x104/0x27c) Skipped: 0 Half: 0 Word: 0 DWord: 0 Multi: 72645 User faults: 3 (fixup+warn) This patch was suggested by Andrew Lunn in this message to linux-netdev: http://marc.info/?l=linux-arm-kernel&m=147465452108384&w=2 and adapted from a patch by Russell King from 2014: http://git.arm.linux.org.uk/cgit/linux-arm.git/commit/?id=70d8a8a Signed-off-by: Eric Nelson <eric@nelint.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-27net: fec: remove QUIRK_HAS_RACC from i.mx27Eric Nelson
According to the i.MX27 reference manual, this SoC does not have support for the receive accelerator (RACC) register at offset 0x1C4. http://cache.nxp.com/files/32bit/doc/ref_manual/MCIMX27RM.pdf Signed-off-by: Eric Nelson <eric@nelint.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-27net: fec: remove QUIRK_HAS_RACC from i.mx25Eric Nelson
According to the i.MX25 reference manual, this SoC does not have support for the receive accelerator (RACC) register at offset 0x1C4. http://www.nxp.com/files/dsp/doc/ref_manual/IMX25RM.pdf Signed-off-by: Eric Nelson <eric@nelint.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-26net: tg3: use new api ethtool_{get|set}_link_ksettingsPhilippe Reynes
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Acked-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-26iwlwifi: mvm: initialise ADD_STA before sending it to the firmwareEmmanuel Grumbach
When we unshare a queue, the ADD_STA was not properly initialised. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-09-26iwlwifi: allow error table address new rangeSara Sharon
The firmware has a new smart linker, and this table can now be in ICCM or in SMEM. It is not hardcoded, but depends on code size. Allow the full range. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-09-26iwlwifi: mvm: fix typo in TC_CMD_SEC_KEY_FROM_TABLEEmmanuel Grumbach
This define should really be TX_CMD_SEC_KEY_FROM_TABLE Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-09-26iwlwifi: remove support for fw older than -17 and -22Luca Coelho
FW versions older than -17 for 3160 and 7260 and older than -22 for newer NICs are not supported anymore. Don't load these versions and remove code that handles them. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-09-26brcmfmac: drop unused fields from struct brcmf_pubRafał Miłecki
They seem to be there from the first day. We calculate these values but never use them. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-26brcmfmac: fix memory leak in brcmf_fill_bss_paramRafał Miłecki
This function is called from get_station callback which means that every time user space was getting/dumping station(s) we were leaking 2 KiB. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Fixes: 1f0dc59a6de ("brcmfmac: rework .get_station() callback") Cc: stable@vger.kernel.org # 4.2+ Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-26rtl8xxxu: Stop log spam from each successful interruptLarry Finger
As soon as debugging is turned on, the logs are filled with messages reporting the interrupt status. As this quantity is usually zero, this output is not needed. In fact, there will be a report if the status is not zero, thus the debug line in question could probably be deleted. Rather than taking that action, I have changed it to only be printed when the newly added RTL8XXXU_DEBUG_INTERRUPT bit is set in the debug mask. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-26rtl8xxxu: Use a struct rtl8xxxu_fileops * in rtl8xxxu_init_device()Jes Sorensen
This saves some 217, or about, derefences of priv->fops. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-26rtl8xxxu: Clean up llt_init() APIJes Sorensen
Remove last_tx_page argument from the llt_init() function. The rtl8xxxu_fileops structure contains the correct TX_TOTAL_PAGE_NUM value for the device, and rtl8xxxu_auto_llt_table() doesn't need to know the value in the first place. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-26rtl8xxxu: Fix off by one error calculating pubqJes Sorensen
This was detected tracing the 8188eu driver, but doesn't seem to make any difference when using it. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-26mwifiex: code rearrangement in mwifiex_usb_host_to_card()Amitkumar Karwar
This patch helps get rid of goto statement and improves readability. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-26mwifiex: fix race condition causing tx timeoutCathy Luo
It's been observed that in a corner case mwifiex_usb_tx_complete() gets called before we exit from mwifiex_usb_host_to_card() after submitting the urb. 'data_sent' flag remains set in this case. It blocks further Tx packets and triggers watchdog timeout. The problem is fixed by setting data_sent and port_block flag at correct place. Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Shengzhen Li <szli@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-26mwifiex: fix kernel crash for USB chipsetsCathy Luo
Following crash issue is observed during TCP traffic stress test [ 2253.625439] NMI watchdog: BUG: soft lockup - CPU#3 stuck for 22s! [kworker/u17:1:5191] [ 2253.625520] Call Trace: [ 2253.625527] [<ffffffffc0b47030>] ? moal_spin_lock+0x30/0x30 [usb8xxx] [ 2253.625533] [<ffffffffc0ac3ceb>] ? wlan_wmm_lists_empty+0xb/0xf0 [mlan] [ 2253.625537] [<ffffffffc0ab0ea3>] mlan_main_process+0x1b3/0x720 [mlan] [ 2253.625540] [<ffffffffc0b337f5>] woal_main_work_queue+0x45/0x80 [usb8xxx] [ 2253.625543] [<ffffffff8108aaf0>] process_one_work+0x150/0x3f0 [ 2253.625545] [<ffffffff8108b1e1>] worker_thread+0x121/0x520 [ 2253.625547] [<ffffffff8108b0c0>] ? rescuer_thread+0x330/0x330 [ 2253.625549] [<ffffffff81090222>] kthread+0xd2/0xf0 [ 2253.625551] [<ffffffff81090150>] ? kthread_create_on_node+0x1c0/0x1c0 [ 2253.625553] [<ffffffff8179423c>] ret_from_fork+0x7c/0xb0 [ 2253.625555] [<ffffffff81090150>] ? kthread_create_on_node+0x1c0/0x1c0 In mwifiex_usb_tx_complete(), we are updating port->block_status first and then freeing the skb attached to that URB. We may end up attaching new skb to URB in a corner case and same will be freed. This results in the kernel crash. The problem is solved by changing the sequence. Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Shengzhen Li <szli@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-26brcmfmac: simplify mapping of auth typeHante Meuleman
The 802.11 standard only has four valid auth type configurations of which our firmware only supports two, ie. Open System and Shared Key. Simplify the mapping falling back to automatic for other types specified by user-space. Reviewed-by: Arend Van Spriel <arend.vanspriel@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Signed-off-by: Hante Meuleman <hante.meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-26brcmfmac: fix out of bound access on clearing wowl wake indicatorHante Meuleman
Clearing the wowl wakeindicator happens with a rather odd construction where the string "clear" is used to set the iovar wowl_wakeind. This was implemented incorrectly as it caused an out of bound access. Use an intermediate variable of correct length and copy string in that. Problem was found using coverity. Reviewed-by: Arend Van Spriel <arend.vanspriel@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Signed-off-by: Hante Meuleman <hante.meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-26brcmfmac: fix clearing entry IPv6 addressHante Meuleman
When IPv6 address is to be cleared there is a possible out of bound access. But also the clearing of the last entry and the adjustment of total number of stored IPv6 addresses is not updated. This patch fixes that bug. Bug was found using coverity. Reviewed-by: Arend Van Spriel <arend.vanspriel@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Signed-off-by: Hante Meuleman <hante.meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-26brcmfmac: remove unnecessary null pointer checkHante Meuleman
in the function brcmf_bus_start() in the exception handling a check is made to dermine whether ifp is null, though this is not possible. Removing the unnessary check. Reviewed-by: Arend Van Spriel <arend.vanspriel@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Signed-off-by: Hante Meuleman <hante.meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-26brcmfmac: remove worker from .ndo_set_mac_address() callbackArend Van Spriel
As it turns out there is no need to use a worker for the callback because it is not called from atomic context. Reported-by: Dan Williams <dcbw@redhat.com> Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-26brcmfmac: initialize variable in brcmf_sdiod_regrl()Arend Van Spriel
In case of an error the variable returned is uninitialized. The caller will probably check the error code before using it, but better assure it is set to zero. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-26brcmfmac: fix memory leak in brcmf_flowring_add_tdls_peer()Arend Van Spriel
In the error paths in brcmf_flowring_add_tdls_peer() the allocated resource should be freed. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-26brcmfmac: rework pointer trickery in brcmf_proto_bcdc_query_dcmd()Arend Van Spriel
The variable info is assigned to point to bcdc->msg[1], which is the same as pointing to bcdc->buf. As that is what we want to access make it clear by fixing the assignment. This also avoid out-of-bounds errors from static analyzers are bcdc->msg[1] is not in the structure definition. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-26brcmfmac: ignore 11d configuration errorsHante Meuleman
802.11d is not always supported by firmware anymore. Currently the AP configuration of 11d will cause an abort if the ioctl set is failing. This behavior is not correct and the error should be ignored. Reviewed-by: Arend Van Spriel <arend.vanspriel@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Signed-off-by: Hante Meuleman <hante.meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-26mwifiex: cfg80211 set_default_mgmt_key handlerGanapathi Bhat
Previously device used to start using IGTK key as Tx key as soon as it gets downloaded in add_key(). This patch implements set_default_mgmt_key handler. We will update Tx key ID in set_default_mgmt_key(). Signed-off-by: Ganapathi Bhat <gbhat@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-26wlcore: wl18xx: Use chip specific configuration firmwareTony Lindgren
Use the wl18xx specific config firmware we now have available. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-26wlcore: Fix config firmware loading issuesTony Lindgren
Booting multiple wl12xx and wl18xx devices using the same rootfs is a pain. You currently have to symlink the right nvs file depending on the wl12xx type. For example, with wl1271-nvs.bin being a symlink to wl127x-nvs.bin by default and trying to bring up a wl128x based device: wlcore: ERROR nvs size is not as expected: 1113 != 912 wlcore: ERROR NVS file is needed during boot wlcore: ERROR NVS file is needed during boot wlcore: ERROR firmware boot failed despite 3 retries Note that wl18xx uses a separate config firmware wl18xx-conf.bin that can be generated with tools using the following two git repos: git.ti.com/wilink8-wlan/18xx-ti-utils git.ti.com/wilink8-wlan/wl18xx_fw So let's not configure the nvs file for wl18xx as it's not needed AFAIK. If it turns out that we also need the nvs file for wl18xx, we can just add it to the config firmware data for wl18xx. Let's fix the issue by using the chip specific config firmware data, and make sure we produce understandable warnings if something is missing. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-26wlcore: spi: Populate config firmware dataTony Lindgren
Configure the config firmware names and make it available in platform data. Let's also fix the order of the struct wilink_family_data while at it. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-26wlcore: sdio: Populate config firmware dataTony Lindgren
Configure the config firmware names and make it available in platform data. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-26wlcore: Prepare family to fix nvs file handlingTony Lindgren
Move struct wilink_family_data to be available for all TI WLAN variants. And fix familiy typo, it should be just family. Looks like wl12xx use two different nvs.bin files and wl18xx uses a different conf.bin file. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-26bnx2x: allocate mac filtering pending list in PAGE_SIZE incrementsJason Baron
Currently, we can have high order page allocations that specify GFP_ATOMIC when configuring multicast MAC address filters. For example, we have seen order 2 page allocation failures with ~500 multicast addresses configured. Convert the allocation for the pending list to be done in PAGE_SIZE increments. Signed-off-by: Jason Baron <jbaron@akamai.com> Cc: Yuval Mintz <Yuval.Mintz@qlogic.com> Cc: Ariel Elior <Ariel.Elior@qlogic.com> Acked-by: Yuval Mintz <Yuval.Mintz@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-26bnx2x: allocate mac filtering 'mcast_list' in PAGE_SIZE incrementsJason Baron
Currently, we can have high order page allocations that specify GFP_ATOMIC when configuring multicast MAC address filters. For example, we have seen order 2 page allocation failures with ~500 multicast addresses configured. Convert the allocation for 'mcast_list' to be done in PAGE_SIZE increments. Signed-off-by: Jason Baron <jbaron@akamai.com> Cc: Yuval Mintz <Yuval.Mintz@qlogic.com> Cc: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-26nfp: bpf: improve handling for disabled BPF syscallArnd Bergmann
I stumbled over a new warning during randconfig testing, with CONFIG_BPF_SYSCALL disabled: drivers/net/ethernet/netronome/nfp/nfp_net_offload.c: In function 'nfp_net_bpf_offload': drivers/net/ethernet/netronome/nfp/nfp_net_offload.c:263:3: error: '*((void *)&res+4)' may be used uninitialized in this function [-Werror=maybe-uninitialized] drivers/net/ethernet/netronome/nfp/nfp_net_offload.c:263:3: error: 'res.n_instr' may be used uninitialized in this function [-Werror=maybe-uninitialized] As far as I can tell, this is a false positive caused by the compiler getting confused about a function that is partially inlined, but it's easy to avoid while improving the code: The nfp_bpf_jit() stub helper for that configuration is unusual as it is defined in a header file but not marked 'static inline'. By moving the compile-time check into the caller using the IS_ENABLED() macro, we can remove that stub and simplify the nfp_net_bpf_offload_prepare() function enough to unconfuse the compiler. Fixes: 7533fdc0f77f ("nfp: bpf: add hardware bpf offload") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-26net: bcmgenet: remove unused function in bcmgenet.cBaoyou Xie
We get 1 warning when building kernel with W=1: drivers/net/ethernet/broadcom/genet/bcmgenet.c:2763:5: warning: no previous prototype for 'bcmgenet_hfb_add_filter' [-Wmissing-prototypes] In fact, this function is implemented in drivers/net/ethernet/broadcom/genet/bcmgenet.c, but be called by no one, thus can be removed. So this patch removes the unused functions. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-26cxgb4: mark symbols static where possibleBaoyou Xie
We get 10 warnings when building kernel with W=1: drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:304:5: warning: no previous prototype for 'cxgb4_dcb_enabled' [-Wmissing-prototypes] drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.c:194:5: warning: no previous prototype for 'setup_sge_queues_uld' [-Wmissing-prototypes] drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.c:241:6: warning: no previous prototype for 'free_sge_queues_uld' [-Wmissing-prototypes] drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.c:268:5: warning: no previous prototype for 'cfg_queues_uld' [-Wmissing-prototypes] drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.c:344:6: warning: no previous prototype for 'free_queues_uld' [-Wmissing-prototypes] drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.c:353:5: warning: no previous prototype for 'request_msix_queue_irqs_uld' [-Wmissing-prototypes] drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.c:379:6: warning: no previous prototype for 'free_msix_queue_irqs_uld' [-Wmissing-prototypes] drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.c:393:6: warning: no previous prototype for 'name_msix_vecs_uld' [-Wmissing-prototypes] drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.c:433:6: warning: no previous prototype for 'enable_rx_uld' [-Wmissing-prototypes] drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.c:442:6: warning: no previous prototype for 'quiesce_rx_uld' [-Wmissing-prototypes] In fact, these functions are only used in the file in which they are declared and don't need a declaration, but can be made static. so this patch marks these functions with 'static'. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-26net: mvneta: mark symbols static where possibleBaoyou Xie
We get 2 warnings when building kernel with W=1: drivers/net/ethernet/marvell/mvneta.c:639:27: warning: no previous prototype for 'mvneta_get_stats64' [-Wmissing-prototypes] drivers/net/ethernet/marvell/mvneta.c:3529:5: warning: no previous prototype for 'mvneta_ethtool_set_link_ksettings' [-Wmissing-prototypes] In fact, these two functions are only used in the file in which they are declared and don't need a declaration, but can be made static. so this patch marks these functions with 'static'. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-01 19:14:59 +0000