| Age | Commit message (Collapse) | Author |
|---|
|
[ Upstream commit 9b2bfdbf43adb9929c5ddcdd96efedbf1c88cf53 ]
When transmitting a PTP frame which is timestamp using 2 step, the
following warning appears if CONFIG_PROVE_LOCKING is enabled:
=============================
[ BUG: Invalid wait context ]
6.17.0-rc1-00326-ge6160462704e #427 Not tainted
-----------------------------
ptp4l/119 is trying to lock:
c2a44ed4 (&vsc8531->ts_lock){+.+.}-{3:3}, at: vsc85xx_txtstamp+0x50/0xac
other info that might help us debug this:
context-{4:4}
4 locks held by ptp4l/119:
#0: c145f068 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0x58/0x1440
#1: c29df974 (dev->qdisc_tx_busylock ?: &qdisc_tx_busylock){+...}-{2:2}, at: __dev_queue_xmit+0x5c4/0x1440
#2: c2aaaad0 (_xmit_ETHER#2){+.-.}-{2:2}, at: sch_direct_xmit+0x108/0x350
#3: c2aac170 (&lan966x->tx_lock){+.-.}-{2:2}, at: lan966x_port_xmit+0xd0/0x350
stack backtrace:
CPU: 0 UID: 0 PID: 119 Comm: ptp4l Not tainted 6.17.0-rc1-00326-ge6160462704e #427 NONE
Hardware name: Generic DT based system
Call trace:
unwind_backtrace from show_stack+0x10/0x14
show_stack from dump_stack_lvl+0x7c/0xac
dump_stack_lvl from __lock_acquire+0x8e8/0x29dc
__lock_acquire from lock_acquire+0x108/0x38c
lock_acquire from __mutex_lock+0xb0/0xe78
__mutex_lock from mutex_lock_nested+0x1c/0x24
mutex_lock_nested from vsc85xx_txtstamp+0x50/0xac
vsc85xx_txtstamp from lan966x_fdma_xmit+0xd8/0x3a8
lan966x_fdma_xmit from lan966x_port_xmit+0x1bc/0x350
lan966x_port_xmit from dev_hard_start_xmit+0xc8/0x2c0
dev_hard_start_xmit from sch_direct_xmit+0x8c/0x350
sch_direct_xmit from __dev_queue_xmit+0x680/0x1440
__dev_queue_xmit from packet_sendmsg+0xfa4/0x1568
packet_sendmsg from __sys_sendto+0x110/0x19c
__sys_sendto from sys_send+0x18/0x20
sys_send from ret_fast_syscall+0x0/0x1c
Exception stack(0xf0b05fa8 to 0xf0b05ff0)
5fa0: 00000001 0000000e 0000000e 0004b47a 0000003a 00000000
5fc0: 00000001 0000000e 00000000 00000121 0004af58 00044874 00000000 00000000
5fe0: 00000001 bee9d420 00025a10 b6e75c7c
So, instead of using the ts_lock for tx_queue, use the spinlock that
skb_buff_head has.
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Fixes: 7d272e63e0979d ("net: phy: mscc: timestamping and PHC support")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://patch.msgid.link/20250902121259.3257536-1-horatiu.vultur@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4844123fe0b853a4982c02666cb3fd863d701d50 ]
If alloc_skb() fails in pad_compress_skb(), it returns NULL without
releasing the old skb. The caller does:
skb = pad_compress_skb(ppp, skb);
if (!skb)
goto drop;
drop:
kfree_skb(skb);
When pad_compress_skb() returns NULL, the reference to the old skb is
lost and kfree_skb(skb) ends up doing nothing, leading to a memory leak.
Align pad_compress_skb() semantics with realloc(): only free the old
skb if allocation and compression succeed. At the call site, use the
new_skb variable so the original skb is not lost when pad_compress_skb()
fails.
Fixes: b3f9b92a6ec1 ("[PPP]: add PPP MPPE encryption module")
Signed-off-by: Qingfang Deng <dqfext@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Yue Haibing <yuehaibing@huawei.com>
Link: https://patch.msgid.link/20250903100726.269839-1-dqfext@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8bbceba7dc5090c00105e006ce28d1292cfda8dd ]
Add proper error checking for dmaengine_desc_get_metadata_ptr() which
can return an error pointer and lead to potential crashes or undefined
behaviour if the pointer retrieval fails.
Properly handle the error by unmapping DMA buffer, freeing the skb and
returning early to prevent further processing with invalid data.
Fixes: 6a91b846af85 ("net: axienet: Introduce dmaengine support")
Signed-off-by: Abin Joseph <abin.joseph@amd.com>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Link: https://patch.msgid.link/20250903025213.3120181-1-abin.joseph@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9e3d71a92e561ccc77025689dab25d201fee7a3e ]
All paths in probe that call goto defer do so before assigning phydev
and thus it makes sense to cleanup the prior index. It also fixes a bug
where index 0 does not get cleaned up.
Fixes: b7d3e3d3d21a ("net: thunderx: Don't leak phy device references on -EPROBE_DEFER condition.")
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250901213314.48599-1-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9d28f94912589f04ab51fbccaef287d4f40e0d1f ]
phy_np needs to get freed, just like the other child nodes.
Fixes: 5fc7cf179449 ("net: thunderx: Cleanup PHY probing code.")
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250901213018.47392-1-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c786794bd27b0d7a5fd9063695df83206009be59 ]
If the ssid_eid[1] length is more that 32 it leads to memory corruption.
Fixes: a910e4a94f69 ("cw1200: add driver for the ST-E CW1100 & CW1200 WLAN chipsets")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/2a40f5ec7617144aef412034c12919a4927d90ad.1756456951.git.dan.carpenter@linaro.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f8f15f6742b8874e59c9c715d0af3474608310ad ]
If the ssidie[1] length is more that 32 it leads to memory corruption.
Fixes: a910e4a94f69 ("cw1200: add driver for the ST-E CW1100 & CW1200 WLAN chipsets")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/e91fb43fcedc4893b604dfb973131661510901a7.1756456951.git.dan.carpenter@linaro.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1f5d2fd1ca04a23c18b1bde9a43ce2fa2ffa1bce ]
When the "proxy" option is enabled on a VXLAN device, the device will
suppress ARP requests and IPv6 Neighbor Solicitation messages if it is
able to reply on behalf of the remote host. That is, if a matching and
valid neighbor entry is configured on the VXLAN device whose MAC address
is not behind the "any" remote (0.0.0.0 / ::).
The code currently assumes that the FDB entry for the neighbor's MAC
address points to a valid remote destination, but this is incorrect if
the entry is associated with an FDB nexthop group. This can result in a
NPD [1][3] which can be reproduced using [2][4].
Fix by checking that the remote destination exists before dereferencing
it.
[1]
BUG: kernel NULL pointer dereference, address: 0000000000000000
[...]
CPU: 4 UID: 0 PID: 365 Comm: arping Not tainted 6.17.0-rc2-virtme-g2a89cb21162c #2 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-4.fc41 04/01/2014
RIP: 0010:vxlan_xmit+0xb58/0x15f0
[...]
Call Trace:
<TASK>
dev_hard_start_xmit+0x5d/0x1c0
__dev_queue_xmit+0x246/0xfd0
packet_sendmsg+0x113a/0x1850
__sock_sendmsg+0x38/0x70
__sys_sendto+0x126/0x180
__x64_sys_sendto+0x24/0x30
do_syscall_64+0xa4/0x260
entry_SYSCALL_64_after_hwframe+0x4b/0x53
[2]
#!/bin/bash
ip address add 192.0.2.1/32 dev lo
ip nexthop add id 1 via 192.0.2.2 fdb
ip nexthop add id 10 group 1 fdb
ip link add name vx0 up type vxlan id 10010 local 192.0.2.1 dstport 4789 proxy
ip neigh add 192.0.2.3 lladdr 00:11:22:33:44:55 nud perm dev vx0
bridge fdb add 00:11:22:33:44:55 dev vx0 self static nhid 10
arping -b -c 1 -s 192.0.2.1 -I vx0 192.0.2.3
[3]
BUG: kernel NULL pointer dereference, address: 0000000000000000
[...]
CPU: 13 UID: 0 PID: 372 Comm: ndisc6 Not tainted 6.17.0-rc2-virtmne-g6ee90cb26014 #3 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1v996), BIOS 1.17.0-4.fc41 04/01/2x014
RIP: 0010:vxlan_xmit+0x803/0x1600
[...]
Call Trace:
<TASK>
dev_hard_start_xmit+0x5d/0x1c0
__dev_queue_xmit+0x246/0xfd0
ip6_finish_output2+0x210/0x6c0
ip6_finish_output+0x1af/0x2b0
ip6_mr_output+0x92/0x3e0
ip6_send_skb+0x30/0x90
rawv6_sendmsg+0xe6e/0x12e0
__sock_sendmsg+0x38/0x70
__sys_sendto+0x126/0x180
__x64_sys_sendto+0x24/0x30
do_syscall_64+0xa4/0x260
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x7f383422ec77
[4]
#!/bin/bash
ip address add 2001:db8:1::1/128 dev lo
ip nexthop add id 1 via 2001:db8:1::1 fdb
ip nexthop add id 10 group 1 fdb
ip link add name vx0 up type vxlan id 10010 local 2001:db8:1::1 dstport 4789 proxy
ip neigh add 2001:db8:1::3 lladdr 00:11:22:33:44:55 nud perm dev vx0
bridge fdb add 00:11:22:33:44:55 dev vx0 self static nhid 10
ndisc6 -r 1 -s 2001:db8:1::1 -w 1 2001:db8:1::3 vx0
Fixes: 1274e1cc4226 ("vxlan: ecmp support for mac fdb entries")
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20250901065035.159644-3-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6ead38147ebb813f08be6ea8ef547a0e4c09559a ]
VXLAN FDB entries can point to either a remote destination or an FDB
nexthop group. The latter is usually used in EVPN deployments where
learning is disabled.
However, when learning is enabled, an incoming packet might try to
refresh an FDB entry that points to an FDB nexthop group and therefore
does not have a remote. Such packets should be dropped, but they are
only dropped after dereferencing the non-existent remote, resulting in a
NPD [1] which can be reproduced using [2].
Fix by dropping such packets earlier. Remove the misleading comment from
first_remote_rcu().
[1]
BUG: kernel NULL pointer dereference, address: 0000000000000000
[...]
CPU: 13 UID: 0 PID: 361 Comm: mausezahn Not tainted 6.17.0-rc1-virtme-g9f6b606b6b37 #1 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-4.fc41 04/01/2014
RIP: 0010:vxlan_snoop+0x98/0x1e0
[...]
Call Trace:
<TASK>
vxlan_encap_bypass+0x209/0x240
encap_bypass_if_local+0xb1/0x100
vxlan_xmit_one+0x1375/0x17e0
vxlan_xmit+0x6b4/0x15f0
dev_hard_start_xmit+0x5d/0x1c0
__dev_queue_xmit+0x246/0xfd0
packet_sendmsg+0x113a/0x1850
__sock_sendmsg+0x38/0x70
__sys_sendto+0x126/0x180
__x64_sys_sendto+0x24/0x30
do_syscall_64+0xa4/0x260
entry_SYSCALL_64_after_hwframe+0x4b/0x53
[2]
#!/bin/bash
ip address add 192.0.2.1/32 dev lo
ip address add 192.0.2.2/32 dev lo
ip nexthop add id 1 via 192.0.2.3 fdb
ip nexthop add id 10 group 1 fdb
ip link add name vx0 up type vxlan id 10010 local 192.0.2.1 dstport 12345 localbypass
ip link add name vx1 up type vxlan id 10020 local 192.0.2.2 dstport 54321 learning
bridge fdb add 00:11:22:33:44:55 dev vx0 self static dst 192.0.2.2 port 54321 vni 10020
bridge fdb add 00:aa:bb:cc:dd:ee dev vx1 self static nhid 10
mausezahn vx0 -a 00:aa:bb:cc:dd:ee -b 00:11:22:33:44:55 -c 1 -q
Fixes: 1274e1cc4226 ("vxlan: ecmp support for mac fdb entries")
Reported-by: Marlin Cremers <mcremers@cloudbear.nl>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20250901065035.159644-2-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d4736737110ffa83d29f1c5d17b26113864205f6 ]
When sending llc packets with vlan tx offload, the hardware fails to
actually add the tag. Deal with this by fixing it up in software.
Fixes: 656e705243fd ("net-next: mediatek: add support for MT7623 ethernet")
Reported-by: Thibaut VARENE <hacks@slashdirt.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250831182007.51619-1-nbd@nbd.name
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 97acb0259cc9cbfbd7ab689e25684f3d8ce10e26 ]
During GTK rekey, mac80211 issues a clear key (if the old key exists)
followed by an install key operation in the same context. This causes
ath11k to send two WMI commands in quick succession: one to clear the
old key and another to install the new key in the same slot.
Under certain conditions—especially under high load or time sensitive
scenarios, firmware may process these commands asynchronously in a way
that firmware assumes the key is cleared whereas hardware has a valid key.
This inconsistency between hardware and firmware leads to group addressed
packet drops. Only setting the same key again can restore a valid key in
firmware and allow packets to be transmitted.
This issue remained latent because the host's clear key commands were
not effective in firmware until commit 436a4e886598 ("ath11k: clear the
keys properly via DISABLE_KEY"). That commit enabled the host to
explicitly clear group keys, which inadvertently exposed the race.
To mitigate this, restrict group key clearing across all modes (AP, STA,
MESH). During rekey, the new key can simply be set on top of the previous
one, avoiding the need for a clear followed by a set.
However, in AP mode specifically, permit group key clearing when no
stations are associated. This exception supports transitions from secure
modes (e.g., WPA2/WPA3) to open mode, during which all associated peers
are removed and the group key is cleared as part of the transition.
Add a per-BSS station counter to track the presence of stations during
set key operations. Also add a reset_group_keys flag to track the key
re-installation state and avoid repeated installation of the same key
when the number of connected stations transitions to non-zero within a
rekey period.
Additionally, for AP and Mesh modes, when the first station associates,
reinstall the same group key that was last set. This ensures that the
firmware recovers from any race that may have occurred during a previous
key clear when no stations were associated.
This change ensures that key clearing is permitted only when no clients
are connected, avoiding packet loss while enabling dynamic security mode
transitions.
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.9.0.1-02146-QCAHKSWPL_SILICONZ-1
Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.41
Reported-by: Steffen Moser <lists@steffen-moser.de>
Closes: https://lore.kernel.org/linux-wireless/c6366409-9928-4dd7-bf7b-ba7fcf20eabf@steffen-moser.de
Fixes: 436a4e886598 ("ath11k: clear the keys properly via DISABLE_KEY")
Signed-off-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Tested-by: Nicolas Escande <nico.escande@gmail.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250810170018.1124014-1-rameshkumar.sundaram@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 22c55fb9eb92395d999b8404d73e58540d11bdd8 ]
Currently, when updating EMLSR capabilities of a multi-link (ML) station,
only the EMLSR parameters (e.g., padding delay, transition delay, and
timeout) are sent to firmware. However, firmware also requires the
EMLSR support flag to be set in the MLO flags of the peer assoc WMI
command to properly handle EML operating mode notification frames.
Set the ATH12K_WMI_FLAG_MLO_EMLSR_SUPPORT flag in the peer assoc WMI
command when the ML station is EMLSR-capable, so that the firmware can
respond to EHT EML action frames from associated stations.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Fixes: 4bcf9525bc49 ("wifi: ath12k: update EMLSR capabilities of ML Station")
Signed-off-by: Ramya Gnanasekar <ramya.gnanasekar@oss.qualcomm.com>
Signed-off-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250801104920.3326352-1-rameshkumar.sundaram@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b7e5c3e3bfa9dc8af75ff6d8633ad7070e1985e4 ]
incorrectly used ixgbe_lp_map in loops intended to populate the
supported and advertised EEE linkmode bitmaps based on ixgbe_ls_map.
This results in incorrect bit setting and potential out-of-bounds
access, since ixgbe_lp_map and ixgbe_ls_map have different sizes
and purposes.
ixgbe_lp_map[i] -> ixgbe_ls_map[i]
Use ixgbe_ls_map for supported and advertised linkmodes, and keep
ixgbe_lp_map usage only for link partner (lp_advertised) mapping.
Fixes: 9356b6db9d05 ("net: ethernet: ixgbe: Convert EEE to use linkmodes")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a556f06338e1d5a85af0e32ecb46e365547f92b9 ]
list_first_entry() never returns NULL - if the list is empty, it still
returns a pointer to an invalid object, leading to potential invalid
memory access when dereferenced.
Fix this by using list_first_entry_or_null instead of list_first_entry.
Fixes: e3219ce6a775 ("i40e: Add support for client interface for IWARP driver")
Signed-off-by: Zhen Ni <zhen.ni@easystack.cn>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9fcdb1c3c4ba134434694c001dbff343f1ffa319 ]
The 'command' and 'netdev_ops' debugfs files are a legacy debugging
interface supported by the i40e driver since its early days by commit
02e9c290814c ("i40e: debugfs interface").
Both of these debugfs files provide a read handler which is mostly useless,
and which is implemented with questionable logic. They both use a static
256 byte buffer which is initialized to the empty string. In the case of
the 'command' file this buffer is literally never used and simply wastes
space. In the case of the 'netdev_ops' file, the last command written is
saved here.
On read, the files contents are presented as the name of the device
followed by a colon and then the contents of their respective static
buffer. For 'command' this will always be "<device>: ". For 'netdev_ops',
this will be "<device>: <last command written>". But note the buffer is
shared between all devices operated by this module. At best, it is mostly
meaningless information, and at worse it could be accessed simultaneously
as there doesn't appear to be any locking mechanism.
We have also recently received multiple reports for both read functions
about their use of snprintf and potential overflow that could result in
reading arbitrary kernel memory. For the 'command' file, this is definitely
impossible, since the static buffer is always zero and never written to.
For the 'netdev_ops' file, it does appear to be possible, if the user
carefully crafts the command input, it will be copied into the buffer,
which could be large enough to cause snprintf to truncate, which then
causes the copy_to_user to read beyond the length of the buffer allocated
by kzalloc.
A minimal fix would be to replace snprintf() with scnprintf() which would
cap the return to the number of bytes written, preventing an overflow. A
more involved fix would be to drop the mostly useless static buffers,
saving 512 bytes and modifying the read functions to stop needing those as
input.
Instead, lets just completely drop the read access to these files. These
are debug interfaces exposed as part of debugfs, and I don't believe that
dropping read access will break any script, as the provided output is
pretty useless. You can find the netdev name through other more standard
interfaces, and the 'netdev_ops' interface can easily result in garbage if
you issue simultaneous writes to multiple devices at once.
In order to properly remove the i40e_dbg_netdev_ops_buf, we need to
refactor its write function to avoid using the static buffer. Instead, use
the same logic as the i40e_dbg_command_write, with an allocated buffer.
Update the code to use this instead of the static buffer, and ensure we
free the buffer on exit. This fixes simultaneous writes to 'netdev_ops' on
multiple devices, and allows us to remove the now unused static buffer
along with removing the read access.
Fixes: 02e9c290814c ("i40e: debugfs interface")
Reported-by: Kunwu Chan <chentao@kylinos.cn>
Closes: https://lore.kernel.org/intel-wired-lan/20231208031950.47410-1-chentao@kylinos.cn/
Reported-by: Wang Haoran <haoranwangsec@gmail.com>
Closes: https://lore.kernel.org/all/CANZ3JQRRiOdtfQJoP9QM=6LS1Jto8PGBGw6y7-TL=BcnzHQn1Q@mail.gmail.com/
Reported-by: Amir Mohammad Jahangirzad <a.jahangirzad@gmail.com>
Closes: https://lore.kernel.org/all/20250722115017.206969-1-a.jahangirzad@gmail.com/
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Dawid Osuchowski <dawid.osuchowski@linux.intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Kunwu Chan <kunwu.chan@linux.dev>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit acf3a5c8be80fe238c1a7629db1c21c74a1f9dd4 ]
On control planes that allow changing the MAC address of the interface,
the driver must provide a MAC type to avoid errors such as:
idpf 0000:0a:00.0: Transaction failed (op 535)
idpf 0000:0a:00.0: Received invalid MAC filter payload (op 535) (len 0)
idpf 0000:0a:00.0: Transaction failed (op 536)
These errors occur during driver load or when changing the MAC via:
ip link set <iface> address <mac>
Add logic to set the MAC type when sending ADD/DEL (opcodes 535/536) to
the control plane. Since only one primary MAC is supported per vport, the
driver only needs to send an ADD opcode when setting it. Remove the old
address by calling __idpf_del_mac_filter(), which skips the message and
just clears the entry from the internal list. This avoids an error on DEL
as it attempts to remove an address already cleared by the preceding ADD
opcode.
Fixes: ce1b75d0635c ("idpf: add ptypes and MAC filter support")
Reported-by: Jian Liu <jianliu@redhat.com>
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f6486338fde3f04ed0ec59fe67a69a208c32734f ]
Recent versions of the E810 firmware have support for an extra interrupt to
handle report of the "low latency" Tx timestamps coming from the
specialized low latency firmware interface. Instead of polling the
registers, software can wait until the low latency interrupt is fired.
This logic makes use of the Tx timestamp tracking structure, ice_ptp_tx, as
it uses the same "ready" bitmap to track which Tx timestamps complete.
Unfortunately, the ice_ll_ts_intr() function does not check if the
tracker is initialized before its first access. This results in NULL
dereference or use-after-free bugs similar to the issues fixed in the
ice_ptp_ts_irq() function.
Fix this by only checking the in_use bitmap (and other fields) if the
tracker is marked as initialized. The reset flow will clear the init field
under lock before it tears the tracker down, thus preventing any
use-after-free or NULL access.
Fixes: 82e71b226e0e ("ice: Enable SW interrupt from FW for LL TS")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 403bf043d9340196e06769065169df7444b91f7a ]
The E810 device has support for a "low latency" firmware interface to
access and read the Tx timestamps. This interface does not use the standard
Tx timestamp logic, due to the latency overhead of proxying sideband
command requests over the firmware AdminQ.
The logic still makes use of the Tx timestamp tracking structure,
ice_ptp_tx, as it uses the same "ready" bitmap to track which Tx
timestamps complete.
Unfortunately, the ice_ptp_ts_irq() function does not check if the tracker
is initialized before its first access. This results in NULL dereference or
use-after-free bugs similar to the following:
[245977.278756] BUG: kernel NULL pointer dereference, address: 0000000000000000
[245977.278774] RIP: 0010:_find_first_bit+0x19/0x40
[245977.278796] Call Trace:
[245977.278809] ? ice_misc_intr+0x364/0x380 [ice]
This can occur if a Tx timestamp interrupt races with the driver reset
logic.
Fix this by only checking the in_use bitmap (and other fields) if the
tracker is marked as initialized. The reset flow will clear the init field
under lock before it tears the tracker down, thus preventing any
use-after-free or NULL access.
Fixes: f9472aaabd1f ("ice: Process TSYN IRQ in a separate function")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a6099f263e1f408bcc7913c9df24b0677164fc5d ]
In the TX completion packet stage of TI SoCs with CPSW2G instance, which
has single external ethernet port, ndev is accessed without being
initialized if no TX packets have been processed. It results into null
pointer dereference, causing kernel to crash. Fix this by having a check
on the number of TX packets which have been processed.
Fixes: 9a369ae3d143 ("net: ethernet: ti: am65-cpsw: remove am65_cpsw_nuss_tx_compl_packets_2g()")
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Chintan Vankar <c-vankar@ti.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250829121051.2031832-1-c-vankar@ti.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e27e34bc99413a29cafae02ad572ea3c9beba2ce ]
We're not currently setting skb->mac_header on ingress, and the netdev
core rx path expects it. Without it, we'll hit a warning on DEBUG_NETDEV
from commit 1e4033b53db4 ("net: skb_reset_mac_len() must check if
mac_header was set")
Initialise the mac_header to refer to the USB transport header.
Fixes: 0791c0327a6e ("net: mctp: Add MCTP USB transport driver")
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Link: https://patch.msgid.link/20250829-mctp-usb-mac-header-v1-1-338ad725e183@codeconstruct.com.au
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 030e1c45666629f72d0fc1d040f9d2915680de8e ]
The code currently reads both U32 attributes and U64 attributes as
U64, so when a U32 attribute is provided by userspace (ie, when not
using XPN), on big endian systems, we'll load that value into the
upper 32bits of the next_pn field instead of the lower 32bits. This
means that the value that userspace provided is ignored (we only care
about the lower 32bits for non-XPN), and we'll start using PNs from 0.
Switch to nla_get_uint, which will read the value correctly on all
arches, whether it's 32b or 64b.
Fixes: 48ef50fa866a ("macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw)")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1c1df1661b89238caf5beefb84a10ebfd56c66ea.1756459839.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6bc8a5098bf4a365c4086a4a4130bfab10a58260 ]
macb_start_xmit and macb_tx_poll can be called with bottom-halves
disabled (e.g. from softirq) as well as with interrupts disabled (with
netpoll). Because of this, all other functions taking tx_ptr_lock must
use spin_lock_irqsave.
Fixes: 138badbc21a0 ("net: macb: use NAPI for TX completion path")
Reported-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Link: https://patch.msgid.link/20250829143521.1686062-1-sean.anderson@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e580beaf43d563aaf457f1c7f934002355ebfe7b ]
Replace NULL check with IS_ERR() check after calling page_pool_create()
since this function returns error pointers (ERR_PTR).
Using NULL check could lead to invalid pointer dereference.
Fixes: 8533b14b3d65 ("eth: mlx4: create a page pool for Rx")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250828121858.67639-1-linmq006@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7000f4fa9b24ae2511b07babd0d49e888db5d265 ]
The warning in bnxt_alloc_one_rx_ring_netmem() reports the number
of pages allocated for the RX aggregation ring. However, it
mistakenly used bp->rx_ring_size instead of bp->rx_agg_ring_size,
leading to confusing or misleading log output.
Use the correct bp->rx_agg_ring_size value to fix this.
Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Link: https://patch.msgid.link/20250830062331.783783-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b79e498080b170fd94fc83bca2471f450811549b ]
The current code incorrectly passes (XIRCREG1_ECR | FullDuplex) as
the register address to GetByte(), instead of fetching the register
value and OR-ing it with FullDuplex. This results in an invalid
register access.
Fix it by reading XIRCREG1_ECR first, then or-ing with FullDuplex
before writing it back.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250827192645.658496-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 019f71a6760a6f89d388c3cd45622d1aae7d3641 ]
Add back a few more PCI IDs to the config match table that
evidently I lost during the cleanups.
Fixes: 1fb053d9876f ("wifi: iwlwifi: cfg: remove unnecessary configs")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250828095500.46fee422651e.I8f6c3e9eea9523bb1658f5690b715eb443740e07@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 22e6bdb129ec64e640f5cccef9686f7c1a7d559b ]
In the fixed commit, I inadvertently removed two configurations
while combining the 0x0083/0x0084 device IDs. Replace the fixed
matches for the BG versions by a masked match and add the BGN
version back with a similar masked match.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=220477
Fixes: 1fb053d9876f ("wifi: iwlwifi: cfg: remove unnecessary configs")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250828095500.fabb99c2df9e.If0ad87bf9ab360da5f613e879fd416c17c544733@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1d33694462fa7da451846c39d653585b61375992 ]
The first array index is a bitmap indicating which of the
other values are valid. Check that bitmap before returning
a value.
Fixes: fc7214c3c986 ("wifi: iwlwifi: read DSM functions from UEFI")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220085
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250828095500.59ec52ff865e.I9e11f497a029eb38f481b2c90c43c0935285216d@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7bf2dfccc2dd70821104d15cbab7b6fca21872be ]
The DSM func 0 (DSM_FUNC_QUERY) returns a bitmap of which
other functions contain valid data, query and check it
before returning other functions data.
Fixes: 9db93491f29e ("iwlwifi: acpi: support device specific method (DSM)")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220085
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250828095500.881e17ff8f6a.Ic6d92997d9d5fad127919d6e1b830cd3fe944468@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 224476613c8499f00ce4de975dd65749c5ca498c ]
We want to see bits being set in the scratch register upon resume, but
if all the bits are set, it means that we were kicked out of the PCI bus
and that clearly doesn't mean we can assume the firmware is still alive
after the suspend / resume cycle.
Fixes: cb347bd29d0d ("wifi: iwlwifi: mvm: fix hibernation")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250828095500.0f203e559242.I59eff718cb5fda575db41081a1a389f7af488717@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 49fba87205bec14a0f6bd997635bf3968408161e ]
Never leave scheduled wcid entries on the temporary on-stack list
Fixes: 0b3be9d1d34e ("wifi: mt76: add separate tx scheduling queue for off-channel tx")
Link: https://patch.msgid.link/20250827085352.51636-6-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit bdeac7815629c1a32b8784922368742e183747ea ]
Avoid leaking them or keeping the wcid on the tx list
Fixes: 0b3be9d1d34e ("wifi: mt76: add separate tx scheduling queue for off-channel tx")
Link: https://patch.msgid.link/20250827085352.51636-5-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 065c79df595af21d6d1b27d642860faa1d938774 ]
Since stations are recreated from scratch, all lists that wcids are added
to must be cleared before calling ieee80211_restart_hw.
Set wcid->sta = 0 for each wcid entry in order to ensure that they are
not added again before they are ready.
Fixes: 8a55712d124f ("wifi: mt76: mt7915: enable full system reset support")
Link: https://patch.msgid.link/20250827085352.51636-4-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4a522b01e368eec58d182ecc47d24f49a39e440d ]
Non-station wcid entries must not be passed to the rx functions.
In case of the global wcid entry, it could even lead to corruption in the wcid
array due to pointer being casted to struct mt7996_sta_link using container_of.
Fixes: 7464b12b7d92 ("wifi: mt76: mt7996: rework mt7996_rx_get_wcid to support MLO")
Link: https://patch.msgid.link/20250827085352.51636-3-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4be3b46ec5190dc79cd38e3750480b2c66a791ad ]
restore fix which was dropped during MLO rework
Fixes: f0b0b239b8f3 ("wifi: mt76: mt7996: rework mt7996_mac_write_txwi() for MLO support")
Signed-off-by: Chad Monroe <chad@monroe.io>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/180fffd409aa57f535a3d2c1951e41ae398ce09e.1754659732.git.chad@monroe.io
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f30906c55a400a9b7fc677e3f4c614b9069bd4a8 ]
Avoid leaking beacons on unrelated channels during scanning/roc
Fixes: c56d6edebc1f ("wifi: mt76: mt7996: use emulated hardware scan support")
Reported-by: Chad Monroe <chad.monroe@adtran.com>
Link: https://patch.msgid.link/20250813121106.81559-1-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4c2334587b0a13b8f4eda1336ae657297fcd743b ]
Only put probe request packets in the offchannel queue if
IEEE80211_TX_CTRL_DONT_USE_RATE_MASK is set and IEEE80211_TX_CTL_TX_OFFCHAN
is unset.
Fixes: 0b3be9d1d34e ("wifi: mt76: add separate tx scheduling queue for off-channel tx")
Reported-by: Chad Monroe <chad.monroe@adtran.com>
Link: https://patch.msgid.link/20250813121106.81559-2-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9f15701370ec15fbf1f6a1cbbf584b0018d036b5 ]
&dev->mt76.mutex lock is taken using mt792x_mutex_acquire(dev) but not
released in one of the error paths, add the unlock to fix it.
Fixes: 5cd0bd815c8a ("wifi: mt76: mt7925: fix NULL deref check in mt7925_change_vif_links")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202503031055.3ZRqxhAl-lkp@intel.com/
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Link: https://patch.msgid.link/20250727140416.1153406-1-harshit.m.mogalapalli@oracle.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 87f38519d27a514c9909f84b8f1334125df9778e ]
When station mode, don't disconnect when we get
channel switch from AP to DFS channel. Most APs
send CSA request after pass background CAC. In other
case we should disconnect after detect beacon miss.
Without patch when we get CSA to DFS channel get:
"kernel: wlo1: preparing for channel switch failed, disconnecting"
Fixes: 8aa2f59260eb ("wifi: mt76: mt7921: introduce CSA support")
Signed-off-by: Janusz Dziedzic <janusz.dziedzic@gmail.com>
Link: https://patch.msgid.link/20250716165443.28354-1-janusz.dziedzic@gmail.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9cb83d4be0b9b697eae93d321e0da999f9cdfcfc ]
The brcmf_btcoex_detach() only shuts down the btcoex timer, if the
flag timer_on is false. However, the brcmf_btcoex_timerfunc(), which
runs as timer handler, sets timer_on to false. This creates critical
race conditions:
1.If brcmf_btcoex_detach() is called while brcmf_btcoex_timerfunc()
is executing, it may observe timer_on as false and skip the call to
timer_shutdown_sync().
2.The brcmf_btcoex_timerfunc() may then reschedule the brcmf_btcoex_info
worker after the cancel_work_sync() has been executed, resulting in
use-after-free bugs.
The use-after-free bugs occur in two distinct scenarios, depending on
the timing of when the brcmf_btcoex_info struct is freed relative to
the execution of its worker thread.
Scenario 1: Freed before the worker is scheduled
The brcmf_btcoex_info is deallocated before the worker is scheduled.
A race condition can occur when schedule_work(&bt_local->work) is
called after the target memory has been freed. The sequence of events
is detailed below:
CPU0 | CPU1
brcmf_btcoex_detach | brcmf_btcoex_timerfunc
| bt_local->timer_on = false;
if (cfg->btcoex->timer_on) |
... |
cancel_work_sync(); |
... |
kfree(cfg->btcoex); // FREE |
| schedule_work(&bt_local->work); // USE
Scenario 2: Freed after the worker is scheduled
The brcmf_btcoex_info is freed after the worker has been scheduled
but before or during its execution. In this case, statements within
the brcmf_btcoex_handler() — such as the container_of macro and
subsequent dereferences of the brcmf_btcoex_info object will cause
a use-after-free access. The following timeline illustrates this
scenario:
CPU0 | CPU1
brcmf_btcoex_detach | brcmf_btcoex_timerfunc
| bt_local->timer_on = false;
if (cfg->btcoex->timer_on) |
... |
cancel_work_sync(); |
... | schedule_work(); // Reschedule
|
kfree(cfg->btcoex); // FREE | brcmf_btcoex_handler() // Worker
/* | btci = container_of(....); // USE
The kfree() above could | ...
also occur at any point | btci-> // USE
during the worker's execution|
*/ |
To resolve the race conditions, drop the conditional check and call
timer_shutdown_sync() directly. It can deactivate the timer reliably,
regardless of its current state. Once stopped, the timer_on state is
then set to false.
Fixes: 61730d4dfffc ("brcmfmac: support critical protocol API for DHCP")
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Link: https://patch.msgid.link/20250822050839.4413-1-duoming@zju.edu.cn
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4a73a36cb704813f588af13d9842d0ba5a185758 ]
This lets NetworkManager/ModemManager know that this is a modem and
needs to be connected first.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://patch.msgid.link/20250814154214.250103-1-lkundrak@v3.sk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit e81a7f65288c7e2cfb7e7890f648e099fd885ab3 upstream.
Add the following Telit Cinterion LE910C4-WWX new compositions:
0x1034: tty (AT) + tty (AT) + rmnet
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 8 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1bc7 ProdID=1034 Rev=00.00
S: Manufacturer=Telit
S: Product=LE910C4-WWX
S: SerialNumber=93f617e7
C: #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fe Prot=ff Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
0x1037: tty (diag) + tty (Telit custom) + tty (AT) + tty (AT) + rmnet
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 15 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1bc7 ProdID=1037 Rev=00.00
S: Manufacturer=Telit
S: Product=LE910C4-WWX
S: SerialNumber=93f617e7
C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fe Prot=ff Driver=option
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
0x1038: tty (Telit custom) + tty (AT) + tty (AT) + rmnet
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 9 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1bc7 ProdID=1038 Rev=00.00
S: Manufacturer=Telit
S: Product=LE910C4-WWX
S: SerialNumber=93f617e7
C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fe Prot=ff Driver=option
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=84(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Cc: stable@vger.kernel.org
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Link: https://patch.msgid.link/20250822091324.39558-1-Fabio.Porcedda@telit.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit dac978e51cce0c1f00a14c4a82f81d387f79b2d4 ]
When the driver is removed the clocks are disabled twice: once in
macb_remove and a second time by runtime pm. Disable wakeup in remove so
all the clocks are disabled and skip the second call to macb_clks_disable.
Always suspend the device as we always set it active in probe.
Fixes: d54f89af6cc4 ("net: macb: Add pm runtime support")
Signed-off-by: Neil Mandir <neil.mandir@seco.com>
Co-developed-by: Sean Anderson <sean.anderson@linux.dev>
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Link: https://patch.msgid.link/20250826143022.935521-1-sean.anderson@linux.dev
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6ede14a2c6365e7e5d855643c7c8390b5268c467 ]
The fbnic driver was presenting with the following locking assert coming
out of a PM resume:
[ 42.208116][ T164] RTNL: assertion failed at drivers/net/phy/phylink.c (2611)
[ 42.208492][ T164] WARNING: CPU: 1 PID: 164 at drivers/net/phy/phylink.c:2611 phylink_resume+0x190/0x1e0
[ 42.208872][ T164] Modules linked in:
[ 42.209140][ T164] CPU: 1 UID: 0 PID: 164 Comm: bash Not tainted 6.17.0-rc2-virtme #134 PREEMPT(full)
[ 42.209496][ T164] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.17.0-5.fc42 04/01/2014
[ 42.209861][ T164] RIP: 0010:phylink_resume+0x190/0x1e0
[ 42.210057][ T164] Code: 83 e5 01 0f 85 b0 fe ff ff c6 05 1c cd 3e 02 01 90 ba 33 0a 00 00 48 c7 c6 20 3a 1d a5 48 c7 c7 e0 3e 1d a5 e8 21 b8 90 fe 90 <0f> 0b 90 90 e9 86 fe ff ff e8 42 ea 1f ff e9 e2 fe ff ff 48 89 ef
[ 42.210708][ T164] RSP: 0018:ffffc90000affbd8 EFLAGS: 00010296
[ 42.210983][ T164] RAX: 0000000000000000 RBX: ffff8880078d8400 RCX: 0000000000000000
[ 42.211235][ T164] RDX: 0000000000000000 RSI: 1ffffffff4f10938 RDI: 0000000000000001
[ 42.211466][ T164] RBP: 0000000000000000 R08: ffffffffa2ae79ea R09: fffffbfff4b3eb84
[ 42.211707][ T164] R10: 0000000000000003 R11: 0000000000000000 R12: ffff888007ad8000
[ 42.211997][ T164] R13: 0000000000000002 R14: ffff888006a18800 R15: ffffffffa34c59e0
[ 42.212234][ T164] FS: 00007f0dc8e39740(0000) GS:ffff88808f51f000(0000) knlGS:0000000000000000
[ 42.212505][ T164] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 42.212704][ T164] CR2: 00007f0dc8e9fe10 CR3: 000000000b56d003 CR4: 0000000000772ef0
[ 42.213227][ T164] PKRU: 55555554
[ 42.213366][ T164] Call Trace:
[ 42.213483][ T164] <TASK>
[ 42.213565][ T164] __fbnic_pm_attach.isra.0+0x8e/0xa0
[ 42.213725][ T164] pci_reset_function+0x116/0x1d0
[ 42.213895][ T164] reset_store+0xa0/0x100
[ 42.214025][ T164] ? pci_dev_reset_attr_is_visible+0x50/0x50
[ 42.214221][ T164] ? sysfs_file_kobj+0xc1/0x1e0
[ 42.214374][ T164] ? sysfs_kf_write+0x65/0x160
[ 42.214526][ T164] kernfs_fop_write_iter+0x2f8/0x4c0
[ 42.214677][ T164] ? kernfs_vma_page_mkwrite+0x1f0/0x1f0
[ 42.214836][ T164] new_sync_write+0x308/0x6f0
[ 42.214987][ T164] ? __lock_acquire+0x34c/0x740
[ 42.215135][ T164] ? new_sync_read+0x6f0/0x6f0
[ 42.215288][ T164] ? lock_acquire.part.0+0xbc/0x260
[ 42.215440][ T164] ? ksys_write+0xff/0x200
[ 42.215590][ T164] ? perf_trace_sched_switch+0x6d0/0x6d0
[ 42.215742][ T164] vfs_write+0x65e/0xbb0
[ 42.215876][ T164] ksys_write+0xff/0x200
[ 42.215994][ T164] ? __ia32_sys_read+0xc0/0xc0
[ 42.216141][ T164] ? do_user_addr_fault+0x269/0x9f0
[ 42.216292][ T164] ? rcu_is_watching+0x15/0xd0
[ 42.216442][ T164] do_syscall_64+0xbb/0x360
[ 42.216591][ T164] entry_SYSCALL_64_after_hwframe+0x4b/0x53
[ 42.216784][ T164] RIP: 0033:0x7f0dc8ea9986
A bit of digging showed that we were invoking the phylink_resume as a part
of the fbnic_up path when we were enabling the service task while not
holding the RTNL lock. We should be enabling this sooner as a part of the
ndo_open path and then just letting the service task come online later.
This will help to enforce the correct locking and brings the phylink
interface online at the same time as the network interface, instead of at a
later time.
I tested this on QEMU to verify this was working by putting the system to
sleep using "echo mem > /sys/power/state" to put the system to sleep in the
guest and then using the command "system_wakeup" in the QEMU monitor.
Fixes: 69684376eed5 ("eth: fbnic: Add link detection")
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/175616257316.1963577.12238158800417771119.stgit@ahduyck-xeon-server.home.arpa
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9448ccd853368582efa9db05db344f8bb9dffe0f ]
The hv_netvsc driver currently enables NAPI after opening the primary and
subchannels. This ordering creates a race: if the Hyper-V host places data
in the host -> guest ring buffer and signals the channel before
napi_enable() has been called, the channel callback will run but
napi_schedule_prep() will return false. As a result, the NAPI poller never
gets scheduled, the data in the ring buffer is not consumed, and the
receive queue may remain permanently stuck until another interrupt happens
to arrive.
Fix this by enabling NAPI and registering it with the RX/TX queues before
vmbus channel is opened. This guarantees that any early host signal after
open will correctly trigger NAPI scheduling and the ring buffer will be
drained.
Fixes: 76bb5db5c749d ("netvsc: fix use after free on module removal")
Signed-off-by: Dipayaan Roy <dipayanroy@linux.microsoft.com>
Link: https://patch.msgid.link/20250825115627.GA32189@linuxonhyperv3.guj3yctzbm1etfxqx2vob5hsef.xx.internal.cloudapp.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b1eded580ab28119de0b0f21efe37ee2b4419144 ]
Currently, in the AF_XDP transmit paths, the CIC bit of
TX Desc3 is set for all packets. Setting this bit for
packets transmitting through queues that don't support
checksum offloading causes the TX DMA to get stuck after
transmitting some packets. This patch ensures the CIC bit
of TX Desc3 is set only if the TX queue supports checksum
offloading.
Fixes: 132c32ee5bc0 ("net: stmmac: Add TX via XDP zero-copy socket")
Signed-off-by: Rohan G Thomas <rohan.g.thomas@altera.com>
Reviewed-by: Matthew Gerlach <matthew.gerlach@altera.com>
Link: https://patch.msgid.link/20250825-xgmac-minor-fixes-v3-3-c225fe4444c0@altera.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 42ef11b2bff5b6a2910c28d2ea47cc00e0fbcaec ]
Correct supported speed modes as per the XGMAC databook.
Commit 9cb54af214a7 ("net: stmmac: Fix IP-cores specific
MAC capabilities") removes support for 10M, 100M and
1000HD. 1000HD is not supported by XGMAC IP, but it does
support 10M and 100M FD mode for XGMAC version >= 2_20,
and it also supports 10M and 100M HD mode if the HDSEL bit
is set in the MAC_HW_FEATURE0 reg. This commit enables support
for 10M and 100M speed modes for XGMAC IP based on XGMAC
version and MAC capabilities.
Fixes: 9cb54af214a7 ("net: stmmac: Fix IP-cores specific MAC capabilities")
Signed-off-by: Rohan G Thomas <rohan.g.thomas@altera.com>
Reviewed-by: Matthew Gerlach <matthew.gerlach@altera.com>
Link: https://patch.msgid.link/20250825-xgmac-minor-fixes-v3-2-c225fe4444c0@altera.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4f23382841e67174211271a454811dd17c0ef3c5 ]
Enabling RX FIFO Overflow interrupts is counterproductive
and causes an interrupt storm when RX FIFO overflows.
Disabling this interrupt has no side effect and eliminates
interrupt storms when the RX FIFO overflows.
Commit 8a7cb245cf28 ("net: stmmac: Do not enable RX FIFO
overflow interrupts") disables RX FIFO overflow interrupts
for DWMAC4 IP and removes the corresponding handling of
this interrupt. This patch is doing the same thing for
XGMAC IP.
Fixes: 2142754f8b9c ("net: stmmac: Add MAC related callbacks for XGMAC2")
Signed-off-by: Rohan G Thomas <rohan.g.thomas@altera.com>
Reviewed-by: Matthew Gerlach <matthew.gerlach@altera.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250825-xgmac-minor-fixes-v3-1-c225fe4444c0@altera.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit aca0c31af61e0d5cf1675a0cbd29460b95ae693c ]
The local Xoff value is being set before the firmware (FW) update.
In case of a failure where the FW is not updated with the new value,
there is no fallback to the previous value.
Update the local Xoff value after the FW has been successfully set.
Fixes: 0696d60853d5 ("net/mlx5e: Receive buffer configuration")
Signed-off-by: Alexei Lazar <alazar@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250825143435.598584-12-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d24341740fe48add8a227a753e68b6eedf4b385a ]
Xon/Xoff sizes are derived from calculations that include
the port speed.
These settings need to be updated and applied whenever the
port speed is changed.
The port speed is typically set after the physical link goes down
and is negotiated as part of the link-up process between the two
connected interfaces.
Xon/Xoff parameters being updated at the point where the new
negotiated speed is established.
Fixes: 0696d60853d5 ("net/mlx5e: Receive buffer configuration")
Signed-off-by: Alexei Lazar <alazar@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250825143435.598584-11-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
