| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull ordered workqueue creation updates from Tejun Heo:
"For historical reasons, unbound workqueues with max concurrency limit
of 1 are considered ordered, even though the concurrency limit hasn't
been system-wide for a long time.
This creates ambiguity around whether ordered execution is actually
required for correctness, which was actually confusing for e.g. btrfs
(btrfs updates are being routed through the btrfs tree).
There aren't that many users in the tree which use the combination and
there are pending improvements to unbound workqueue affinity handling
which will make inadvertent use of ordered workqueue a bigger loss.
This clarifies the situation for most of them by updating the ones
which require ordered execution to use alloc_ordered_workqueue().
There are some conversions being routed through subsystem-specific
trees and likely a few stragglers. Once they're all converted,
workqueue can trigger a warning on unbound + @max_active==1 usages and
eventually drop the implicit ordered behavior"
* tag 'wq-for-6.5-cleanup-ordered' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
rxrpc: Use alloc_ordered_workqueue() to create ordered workqueues
net: qrtr: Use alloc_ordered_workqueue() to create ordered workqueues
net: wwan: t7xx: Use alloc_ordered_workqueue() to create ordered workqueues
dm integrity: Use alloc_ordered_workqueue() to create ordered workqueues
media: amphion: Use alloc_ordered_workqueue() to create ordered workqueues
scsi: NCR5380: Use default @max_active for hostdata->work_q
media: coda: Use alloc_ordered_workqueue() to create ordered workqueues
crypto: octeontx2: Use alloc_ordered_workqueue() to create ordered workqueues
wifi: ath10/11/12k: Use alloc_ordered_workqueue() to create ordered workqueues
wifi: mwifiex: Use default @max_active for workqueues
wifi: iwlwifi: Use default @max_active for trans_pcie->rba.alloc_wq
xen/pvcalls: Use alloc_ordered_workqueue() to create ordered workqueues
virt: acrn: Use alloc_ordered_workqueue() to create ordered workqueues
net: octeontx2: Use alloc_ordered_workqueue() to create ordered workqueues
net: thunderx: Use alloc_ordered_workqueue() to create ordered workqueues
greybus: Use alloc_ordered_workqueue() to create ordered workqueues
powerpc, workqueue: Use alloc_ordered_workqueue() to create ordered workqueues
|
|
BACKGROUND
==========
When multiple work items are queued to a workqueue, their execution order
doesn't match the queueing order. They may get executed in any order and
simultaneously. When fully serialized execution - one by one in the queueing
order - is needed, an ordered workqueue should be used which can be created
with alloc_ordered_workqueue().
However, alloc_ordered_workqueue() was a later addition. Before it, an
ordered workqueue could be obtained by creating an UNBOUND workqueue with
@max_active==1. This originally was an implementation side-effect which was
broken by 4c16bd327c74 ("workqueue: restore WQ_UNBOUND/max_active==1 to be
ordered"). Because there were users that depended on the ordered execution,
5c0338c68706 ("workqueue: restore WQ_UNBOUND/max_active==1 to be ordered")
made workqueue allocation path to implicitly promote UNBOUND workqueues w/
@max_active==1 to ordered workqueues.
While this has worked okay, overloading the UNBOUND allocation interface
this way creates other issues. It's difficult to tell whether a given
workqueue actually needs to be ordered and users that legitimately want a
min concurrency level wq unexpectedly gets an ordered one instead. With
planned UNBOUND workqueue updates to improve execution locality and more
prevalence of chiplet designs which can benefit from such improvements, this
isn't a state we wanna be in forever.
This patch series audits all callsites that create an UNBOUND workqueue w/
@max_active==1 and converts them to alloc_ordered_workqueue() as necessary.
WHAT TO LOOK FOR
================
The conversions are from
alloc_workqueue(WQ_UNBOUND | flags, 1, args..)
to
alloc_ordered_workqueue(flags, args...)
which don't cause any functional changes. If you know that fully ordered
execution is not necessary, please let me know. I'll drop the conversion and
instead add a comment noting the fact to reduce confusion while conversion
is in progress.
If you aren't fully sure, it's completely fine to let the conversion
through. The behavior will stay exactly the same and we can always
reconsider later.
As there are follow-up workqueue core changes, I'd really appreciate if the
patch can be routed through the workqueue tree w/ your acks. Thanks.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Chandrashekar Devegowda <chandrashekar.devegowda@intel.com>
Cc: Intel Corporation <linuxwwan@intel.com>
Cc: Chiranjeevi Rapolu <chiranjeevi.rapolu@linux.intel.com>
Cc: Liu Haijun <haijun.liu@mediatek.com>
Cc: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Cc: Ricardo Martinez <ricardo.martinez@linux.intel.com>
Cc: Loic Poulain <loic.poulain@linaro.org>
Cc: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: netdev@vger.kernel.org
|
|
When the system attempts to sleep while mtk_t7xx is not ready, the driver
cannot put the device to sleep:
[ 12.472918] mtk_t7xx 0000:57:00.0: [PM] Exiting suspend, modem in invalid state
[ 12.472936] mtk_t7xx 0000:57:00.0: PM: pci_pm_suspend(): t7xx_pci_pm_suspend+0x0/0x20 [mtk_t7xx] returns -14
[ 12.473678] mtk_t7xx 0000:57:00.0: PM: dpm_run_callback(): pci_pm_suspend+0x0/0x1b0 returns -14
[ 12.473711] mtk_t7xx 0000:57:00.0: PM: failed to suspend async: error -14
[ 12.764776] PM: Some devices failed to suspend, or early wake event detected
Mediatek confirmed the device can take a rather long time to complete
its initialization, so wait for up to 20 seconds until init is done.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Conflicts:
drivers/net/ethernet/google/gve/gve.h
3ce934558097 ("gve: Secure enough bytes in the first TX desc for all TCP pkts")
75eaae158b1b ("gve: Add XDP DROP and TX support for GQI-QPL format")
https://lore.kernel.org/all/20230406104927.45d176f5@canb.auug.org.au/
https://lore.kernel.org/all/c5872985-1a95-0bc8-9dcc-b6f23b439e9d@tessares.net/
Adjacent changes:
net/can/isotp.c
051737439eae ("can: isotp: fix race between isotp_sendsmg() and isotp_release()")
96d1c81e6a04 ("can: isotp: add module parameter for maximum pdu size")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When playing with various compilers or their versions, some choke on
the t7xx code. For example (with gcc 13):
In file included from ./arch/s390/include/generated/asm/rwonce.h:1,
from ../include/linux/compiler.h:247,
from ../include/linux/build_bug.h:5,
from ../include/linux/bits.h:22,
from ../drivers/net/wwan/t7xx/t7xx_state_monitor.c:17:
In function 'preempt_count',
inlined from 't7xx_fsm_append_event' at ../drivers/net/wwan/t7xx/t7xx_state_monitor.c:439:43:
../include/asm-generic/rwonce.h:44:26: error: array subscript 0 is outside array bounds of 'const volatile int[0]' [-Werror=array-bounds=]
There is no reason for any code in the kernel to be built with -Werror
by default. Note that we have generic CONFIG_WERROR. So if anyone wants
-Werror, they can enable that.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://lore.kernel.org/all/20230330232717.1f8bf5ea@kernel.org/
Cc: Chandrashekar Devegowda <chandrashekar.devegowda@intel.com>
Cc: Intel Corporation <linuxwwan@intel.com>
Cc: Chiranjeevi Rapolu <chiranjeevi.rapolu@linux.intel.com>
Cc: Liu Haijun <haijun.liu@mediatek.com>
Cc: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Cc: Ricardo Martinez <ricardo.martinez@linux.intel.com>
Cc: Loic Poulain <loic.poulain@linaro.org>
Cc: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
wwan_port_fops_write inputs the SKB parameter to the TX callback of
the WWAN device driver. However, the WWAN device (e.g., t7xx) may
have an MTU less than the size of SKB, causing the TX buffer to be
sliced and copied once more in the WWAN device driver.
This patch implements the slicing in the WWAN subsystem and gives
the WWAN devices driver the option to slice(by frag_len) or not. By
doing so, the additional memory copy is reduced.
Meanwhile, this patch gives WWAN devices driver the option to reserve
headroom in fragments for the device-specific metadata.
Signed-off-by: haozhe chang <haozhe.chang@mediatek.com>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Link: https://lore.kernel.org/r/20230316095826.181904-1-haozhe.chang@mediatek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
For PCI devices the Runtime PM refcount is incremented twice:
1. During device enumeration with a call to pm_runtime_forbid.
2. Just before a driver probe logic is called.
Because of that in order to enable Runtime PM on a given device
we have to call both pm_runtime_allow and pm_runtime_put_noidle,
once it's ready to be runtime suspended.
The former was missing causing the pm refcount to never reach 0.
Fixes: d10b3a695ba0 ("net: wwan: t7xx: Runtime PM")
Signed-off-by: Kornel Dulęba <mindal@semihalf.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Resume device before calling napi_schedule, instead of doing in the napi
poll routine. Polling is done in softrq context. We can't call the PM
resume logic from there as it's blocking and not irq safe.
In order to make it work modify the interrupt handler to be run from irq
handler thread.
Fixes: 5545b7b9f294 ("net: wwan: t7xx: Add NAPI support")
Signed-off-by: Kornel Dulęba <mindal@semihalf.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
tools/lib/bpf/ringbuf.c
927cbb478adf ("libbpf: Handle size overflow for ringbuf mmap")
b486d19a0ab0 ("libbpf: checkpatch: Fixed code alignments in ringbuf.c")
https://lore.kernel.org/all/20221121122707.44d1446a@canb.auug.org.au/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The ACPI buffer memory (buffer.pointer) should be freed as the
buffer is not used after acpi_evaluate_object(), free it to
prevent memory leak.
Fixes: 13e920d93e37 ("net: wwan: t7xx: Add core components")
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Link: https://lore.kernel.org/r/1669119580-28977-1-git-send-email-guohanjun@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Replace the work queue based RX flow with a NAPI implementation
Remove rx_thread and dpmaif_rxq_work.
Enable GRO on RX path.
Introduce dummy network device. its responsibility is
- Binds one NAPI object for each DL HW queue and acts as
the agent of all those network devices.
- Use NAPI object to poll DL packets.
- Helps to dispatch each packet to the network interface.
Signed-off-by: Haijun Liu <haijun.liu@mediatek.com>
Co-developed-by: Sreehari Kancharla <sreehari.kancharla@linux.intel.com>
Signed-off-by: Sreehari Kancharla <sreehari.kancharla@linux.intel.com>
Signed-off-by: Chandrashekar Devegowda <chandrashekar.devegowda@intel.com>
Acked-by: Ricardo Martinez <ricardo.martinez@linux.intel.com>
Acked-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
hard_header_len is used by gro_list_prepare() but on Rx, there
is no header so use needed_headroom instead.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sreehari Kancharla <sreehari.kancharla@linux.intel.com>
Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The Modem Logging (MDL) port provides an interface to collect modem
logs for debugging purposes. MDL is supported by the relay interface,
and the mtk_t7xx port infrastructure. MDL allows user-space apps to
control logging via mbim command and to collect logs via the relay
interface, while port infrastructure facilitates communication between
the driver and the modem.
Signed-off-by: Moises Veleta <moises.veleta@linux.intel.com>
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Signed-off-by: Devegowda Chandrashekar <chandrashekar.devegowda@intel.com>
Acked-by: Ricardo Martinez <ricardo.martinez@linux.intel.com>
Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use union inside t7xx_port to group port type specific data members.
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The ndo_start_xmit field in net_device_ops is expected to be of type
netdev_tx_t (*ndo_start_xmit)(struct sk_buff *skb, struct net_device *dev).
The mismatched return type breaks forward edge kCFI since the underlying
function definition does not match the function hook definition.
The return type of t7xx_ccmni_start_xmit should be changed from int to
netdev_tx_t.
Reported-by: Dan Carpenter <error27@gmail.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/1703
Cc: llvm@lists.linux.dev
Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Acked-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Link: https://lore.kernel.org/r/20220912214510.929070-1-nhuck@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This reverts commit 5417197dd516a8e115aa69f62a7b7554b0c3829c, reversing
changes made to 0630f64d25a0f0a8c6a9ce9fde8750b3b561e6f5.
Reverting to allow addressing review comments.
Link: https://lore.kernel.org/all/4c5dbea0-52a9-1c3d-7547-00ea54c90550@linux.intel.com/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch brings-in support for t7xx wwan device firmware flashing &
coredump collection using devlink.
Driver Registers with Devlink framework.
Implements devlink ops flash_update callback that programs modem firmware.
Creates region & snapshot required for device coredump log collection.
On early detection of wwan device in fastboot mode driver sets up CLDMA0 HW
tx/rx queues for raw data transfer then registers with devlink framework.
Upon receiving firmware image & partition details driver sends fastboot
commands for flashing the firmware.
In this flow the fastboot command & response gets exchanged between driver
and device. Once firmware flashing is success completion status is reported
to user space application.
Below is the devlink command usage for firmware flashing
$devlink dev flash pci/$BDF file ABC.img component ABC
Note: ABC.img is the firmware to be programmed to "ABC" partition.
In case of coredump collection when wwan device encounters an exception
it reboots & stays in fastboot mode for coredump collection by host driver.
On detecting exception state driver collects the core dump, creates the
devlink region & reports an event to user space application for dump
collection. The user space application invokes devlink region read command
for dump collection.
Below are the devlink commands used for coredump collection.
devlink region new pci/$BDF/mr_dump
devlink region read pci/$BDF/mr_dump snapshot $ID address $ADD length $LEN
devlink region del pci/$BDF/mr_dump snapshot $ID
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Signed-off-by: Devegowda Chandrashekar <chandrashekar.devegowda@intel.com>
Signed-off-by: Mishra Soumya Prakash <soumya.prakash.mishra@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
PCI rescan module implements "rescan work queue". In firmware flashing
or coredump collection procedure WWAN device is programmed to boot in
fastboot mode and a work item is scheduled for removal & detection.
The WWAN device is reset using APCI call as part driver removal flow.
Work queue rescans pci bus at fixed interval for device detection,
later when device is detect work queue exits.
Signed-off-by: Haijun Liu <haijun.liu@mediatek.com>
Co-developed-by: Madhusmita Sahu <madhusmita.sahu@intel.com>
Signed-off-by: Madhusmita Sahu <madhusmita.sahu@intel.com>
Signed-off-by: Ricardo Martinez <ricardo.martinez@linux.intel.com>
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Signed-off-by: Devegowda Chandrashekar <chandrashekar.devegowda@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
To support cases such as FW update or Core dump, the t7xx device
is capable of signaling the host that a special port needs
to be created before the handshake phase.
This patch adds the infrastructure required to create the
early ports which also requires a different configuration of
CLDMA queues.
Signed-off-by: Haijun Liu <haijun.liu@mediatek.com>
Co-developed-by: Madhusmita Sahu <madhusmita.sahu@intel.com>
Signed-off-by: Madhusmita Sahu <madhusmita.sahu@intel.com>
Signed-off-by: Ricardo Martinez <ricardo.martinez@linux.intel.com>
Signed-off-by: Devegowda Chandrashekar <chandrashekar.devegowda@intel.com>
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The t7xx device contains two Cross Layer DMA (CLDMA) interfaces to
communicate with AP and Modem processors respectively. So far only
MD-CLDMA was being used, this patch enables AP-CLDMA.
Rename small Application Processor (sAP) to AP.
Signed-off-by: Haijun Liu <haijun.liu@mediatek.com>
Co-developed-by: Madhusmita Sahu <madhusmita.sahu@intel.com>
Signed-off-by: Madhusmita Sahu <madhusmita.sahu@intel.com>
Signed-off-by: Moises Veleta <moises.veleta@linux.intel.com>
Signed-off-by: Devegowda Chandrashekar <chandrashekar.devegowda@intel.com>
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Sometimes t7xx_cldma_gpd_set_next_ptr() is called under spin lock,
so add 'gfp_mask' parameter in t7xx_cldma_gpd_set_next_ptr() to pass
the flag.
Fixes: 39d439047f1d ("net: wwan: t7xx: Add control DMA interface")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Link: https://lore.kernel.org/r/20220519032108.2996400-1-yangyingliang@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
t7xx_request_irq() error: uninitialized symbol 'ret'.
t7xx_core_hk_handler() error: potentially dereferencing uninitialized 'event'.
If the condition to enter the loop that waits for the handshake event
is false on the first iteration then the uninitialized 'event' will be
dereferenced, fix this by initializing 'event' to NULL.
t7xx_port_proxy_recv_skb() warn: variable dereferenced before check 'skb'.
No need to check skb at t7xx_port_proxy_recv_skb() since we know it
is always called with a valid skb by t7xx_cldma_gpd_rx_from_q().
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Ricardo Martinez <ricardo.martinez@linux.intel.com>
Link: https://lore.kernel.org/r/20220518195529.126246-1-ricardo.martinez@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
skb_data_area_size() helper was used to calculate the size of the
DMA mapped buffer passed to the HW. Instead of doing this, use the
size passed to allocate the skbs.
Signed-off-by: Ricardo Martinez <ricardo.martinez@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
t7xx_dl_add_timedout() now return int 'ret', but the return type
is bool. Change the return type to int for furthor errcode upstream.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Introduce the mechanism to lock/unlock the device 'deep sleep' mode.
When the PCIe link state is L1.2 or L2, the host side still can keep
the device is in D0 state from the host side point of view. At the same
time, if the device's 'deep sleep' mode is unlocked, the device will
go to 'deep sleep' while it is still in D0 state on the host side.
Signed-off-by: Haijun Liu <haijun.liu@mediatek.com>
Signed-off-by: Chandrashekar Devegowda <chandrashekar.devegowda@intel.com>
Co-developed-by: Ricardo Martinez <ricardo.martinez@linux.intel.com>
Signed-off-by: Ricardo Martinez <ricardo.martinez@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Enables runtime power management callbacks including runtime_suspend
and runtime_resume. Autosuspend is used to prevent overhead by frequent
wake-ups.
Signed-off-by: Haijun Liu <haijun.liu@mediatek.com>
Signed-off-by: Chandrashekar Devegowda <chandrashekar.devegowda@intel.com>
Co-developed-by: Eliot Lee <eliot.lee@intel.com>
Signed-off-by: Eliot Lee <eliot.lee@intel.com>
Signed-off-by: Ricardo Martinez <ricardo.martinez@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Implements suspend, resumes, freeze, thaw, poweroff, and restore
`dev_pm_ops` callbacks.
From the host point of view, the t7xx driver is one entity. But, the
device has several modules that need to be addressed in different ways
during power management (PM) flows.
The driver uses the term 'PM entities' to refer to the 2 DPMA and
2 CLDMA HW blocks that need to be managed during PM flows.
When a dev_pm_ops function is called, the PM entities list is iterated
and the matching function is called for each entry in the list.
Signed-off-by: Haijun Liu <haijun.liu@mediatek.com>
Signed-off-by: Chandrashekar Devegowda <chandrashekar.devegowda@intel.com>
Co-developed-by: Ricardo Martinez <ricardo.martinez@linux.intel.com>
Signed-off-by: Ricardo Martinez <ricardo.martinez@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Creates the Cross Core Modem Network Interface (CCMNI) which implements
the wwan_ops for registration with the WWAN framework, CCMNI also
implements the net_device_ops functions used by the network device.
Network device operations include open, close, start transmission, TX
timeout and change MTU.
Signed-off-by: Haijun Liu <haijun.liu@mediatek.com>
Co-developed-by: Chandrashekar Devegowda <chandrashekar.devegowda@intel.com>
Signed-off-by: Chandrashekar Devegowda <chandrashekar.devegowda@intel.com>
Co-developed-by: Ricardo Martinez <ricardo.martinez@linux.intel.com>
Signed-off-by: Ricardo Martinez <ricardo.martinez@linux.intel.com>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Data Path Modem AP Interface (DPMAIF) HIF layer provides methods
for initialization, ISR, control and event handling of TX/RX flows.
DPMAIF TX
Exposes the 'dmpaif_tx_send_skb' function which can be used by the
network device to transmit packets.
The uplink data management uses a Descriptor Ring Buffer (DRB).
First DRB entry is a message type that will be followed by 1 or more
normal DRB entries. Message type DRB will hold the skb information
and each normal DRB entry holds a pointer to the skb payload.
DPMAIF RX
The downlink buffer management uses Buffer Address Table (BAT) and
Packet Information Table (PIT) rings.
The BAT ring holds the address of skb data buffer for the HW to use,
while the PIT contains metadata about a whole network packet including
a reference to the BAT entry holding the data buffer address.
The driver reads the PIT and BAT entries written by the modem, when
reaching a threshold, the driver will reload the PIT and BAT rings.
Signed-off-by: Haijun Liu <haijun.liu@mediatek.com>
Signed-off-by: Chandrashekar Devegowda <chandrashekar.devegowda@intel.com>
Co-developed-by: Ricardo Martinez <ricardo.martinez@linux.intel.com>
Signed-off-by: Ricardo Martinez <ricardo.martinez@linux.intel.com>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Data Path Modem AP Interface (DPMAIF) HW layer provides HW abstraction
for the upper layer (DPMAIF HIF). It implements functions to do the HW
configuration, TX/RX control and interrupt handling.
Signed-off-by: Haijun Liu <haijun.liu@mediatek.com>
Signed-off-by: Chandrashekar Devegowda <chandrashekar.devegowda@intel.com>
Co-developed-by: Ricardo Martinez <ricardo.martinez@linux.intel.com>
Signed-off-by: Ricardo Martinez <ricardo.martinez@linux.intel.com>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Adds AT and MBIM ports to the port proxy infrastructure.
The initialization method is responsible for creating the corresponding
ports using the WWAN framework infrastructure. The implemented WWAN port
operations are start, stop, and TX.
Signed-off-by: Chandrashekar Devegowda <chandrashekar.devegowda@intel.com>
Co-developed-by: Ricardo Martinez <ricardo.martinez@linux.intel.com>
Signed-off-by: Ricardo Martinez <ricardo.martinez@linux.intel.com>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Control Port implements driver control messages such as modem-host
handshaking, controls port enumeration, and handles exception messages.
The handshaking process between the driver and the modem happens during
the init sequence. The process involves the exchange of a list of
supported runtime features to make sure that modem and host are ready
to provide proper feature lists including port enumeration. Further
features can be enabled and controlled in this handshaking process.
Signed-off-by: Haijun Liu <haijun.liu@mediatek.com>
Signed-off-by: Chandrashekar Devegowda <chandrashekar.devegowda@intel.com>
Co-developed-by: Ricardo Martinez <ricardo.martinez@linux.intel.com>
Signed-off-by: Ricardo Martinez <ricardo.martinez@linux.intel.com>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Port-proxy provides a common interface to interact with different types
of ports. Ports export their configuration via `struct t7xx_port` and
operate as defined by `struct port_ops`.
Signed-off-by: Haijun Liu <haijun.liu@mediatek.com>
Co-developed-by: Chandrashekar Devegowda <chandrashekar.devegowda@intel.com>
Signed-off-by: Chandrashekar Devegowda <chandrashekar.devegowda@intel.com>
Co-developed-by: Ricardo Martinez <ricardo.martinez@linux.intel.com>
Signed-off-by: Ricardo Martinez <ricardo.martinez@linux.intel.com>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Registers the t7xx device driver with the kernel. Setup all the core
components: PCIe layer, Modem Host Cross Core Interface (MHCCIF),
modem control operations, modem state machine, and build
infrastructure.
* PCIe layer code implements driver probe and removal.
* MHCCIF provides interrupt channels to communicate events
such as handshake, PM and port enumeration.
* Modem control implements the entry point for modem init,
reset and exit.
* The modem status monitor is a state machine used by modem control
to complete initialization and stop. It is used also to propagate
exception events reported by other components.
Signed-off-by: Haijun Liu <haijun.liu@mediatek.com>
Signed-off-by: Chandrashekar Devegowda <chandrashekar.devegowda@intel.com>
Co-developed-by: Ricardo Martinez <ricardo.martinez@linux.intel.com>
Signed-off-by: Ricardo Martinez <ricardo.martinez@linux.intel.com>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Cross Layer DMA (CLDMA) Hardware interface (HIF) enables the control
path of Host-Modem data transfers. CLDMA HIF layer provides a common
interface to the Port Layer.
CLDMA manages 8 independent RX/TX physical channels with data flow
control in HW queues. CLDMA uses ring buffers of General Packet
Descriptors (GPD) for TX/RX. GPDs can represent multiple or single
data buffers (DB).
CLDMA HIF initializes GPD rings, registers ISR handlers for CLDMA
interrupts, and initializes CLDMA HW registers.
CLDMA TX flow:
1. Port Layer write
2. Get DB address
3. Configure GPD
4. Triggering processing via HW register write
CLDMA RX flow:
1. CLDMA HW sends a RX "done" to host
2. Driver starts thread to safely read GPD
3. DB is sent to Port layer
4. Create a new buffer for GPD ring
Note: This patch does not enable compilation since it has dependencies
such as t7xx_pcie_mac_clear_int()/t7xx_pcie_mac_set_int() and
struct t7xx_pci_dev which are added by the core patch.
Signed-off-by: Haijun Liu <haijun.liu@mediatek.com>
Signed-off-by: Chandrashekar Devegowda <chandrashekar.devegowda@intel.com>
Co-developed-by: Ricardo Martinez <ricardo.martinez@linux.intel.com>
Signed-off-by: Ricardo Martinez <ricardo.martinez@linux.intel.com>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
