summaryrefslogtreecommitdiff
path: root/drivers/net/wireless
AgeCommit message (Collapse)Author
2025-05-22wifi: mt76: remove capability of partial bandwidth UL MU-MIMOHoward Hsu
The firmware only supports full bandwidth UL MU-MIMO, so remove the partial bandwidth capability from HE PHY CAP. Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Link: https://patch.msgid.link/20250515032952.1653494-1-shayne.chen@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-05-22wifi: mt76: mt7925: add test mode supportMichael Lo
The test mode interface allows controlled execution of chip-level operations such as continuous transmission, reception tests, and register access, which are essential during bring-up, diagnostics, and factory testing. Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Michael Lo <michael.lo@mediatek.com> Link: https://patch.msgid.link/20250505233618.1951021-2-sean.wang@kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-05-22wifi: mt76: mt7925: extend MCU support for testmodeMichael Lo
Add MCU command and its handling needed for testmode support on MT7925. This enables low-level chip testing features such as continuous TX/RX.. Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Michael Lo <michael.lo@mediatek.com> Link: https://patch.msgid.link/20250505233618.1951021-1-sean.wang@kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-05-22wifi: mt76: mt7925: ensure all MCU commands wait for responseMichael Lo
Modify MCU command sending functions to wait for a response, ensuring consistent behavior across all commands and improves reliability by confirming that each command is processed successfully. Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips") Signed-off-by: Michael Lo <michael.lo@mediatek.com> Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Link: https://patch.msgid.link/20250414013954.1151774-3-mingyen.hsieh@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-05-22wifi: mt76: mt7925: refine the sniffer commnadMing Yen Hsieh
Remove a duplicate call to `mt76_mcu_send_msg` to fix redundant operations in the sniffer command handling. Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips") Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Link: https://patch.msgid.link/20250414013954.1151774-2-mingyen.hsieh@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-05-22wifi: mt76: mt7925: prevent multiple scan commandsMing Yen Hsieh
Add a check to ensure only one scan command is active at a time by testing the MT76_HW_SCANNING state. Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips") Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Link: https://patch.msgid.link/20250414013954.1151774-1-mingyen.hsieh@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-05-22wifi: mt76: mt7915: Fix null-ptr-deref in mt7915_mmio_wed_init()Henry Martin
devm_ioremap() returns NULL on error. Currently, mt7915_mmio_wed_init() does not check for this case, which results in a NULL pointer dereference. Prevent null pointer dereference in mt7915_mmio_wed_init(). Fixes: 4f831d18d12d ("wifi: mt76: mt7915: enable WED RX support") Signed-off-by: Henry Martin <bsdhenrymartin@gmail.com> Link: https://patch.msgid.link/20250407061900.85317-1-bsdhenrymartin@gmail.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-05-22wifi: mt76: mt7996: Fix null-ptr-deref in mt7996_mmio_wed_init()Henry Martin
devm_ioremap() returns NULL on error. Currently, mt7996_mmio_wed_init() does not check for this case, which results in a NULL pointer dereference. Prevent null pointer dereference in mt7996_mmio_wed_init() Fixes: 83eafc9251d6 ("wifi: mt76: mt7996: add wed tx support") Signed-off-by: Henry Martin <bsdhenrymartin@gmail.com> Link: https://patch.msgid.link/20250407032349.83360-1-bsdhenrymartin@gmail.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-05-22wifi: mt76: mt7925: add RNR scan support for 6GHzMing Yen Hsieh
Enhance the mt7925 to include RNR scan support. It adds the necessary RNR information to the scan command. Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Link: https://patch.msgid.link/20250321013829.3598-2-mingyen.hsieh@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-05-22wifi: mt76: add mt76_connac_mcu_build_rnr_scan_param routineMing Yen Hsieh
Introduce mt76_connac_mcu_build_rnr_scan_param routine for handling RNR scan. This is a preliminary patch to enable RNR scan in mt7921 and mt7925 driver. Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Link: https://patch.msgid.link/20250321013829.3598-1-mingyen.hsieh@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-05-22wifi: mt76: scan: Fix 'mlink' dereferenced before IS_ERR_OR_NULL checkFeng Jiang
Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/r/202504011739.HvUKtUUe-lkp@intel.com/ Fixes: 3ba20af886d1 ("wifi: mt76: scan: set vif offchannel link for scanning/roc") Signed-off-by: Feng Jiang <jiangfeng@kylinos.cn> Link: https://patch.msgid.link/20250402062415.25434-1-jiangfeng@kylinos.cn Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-05-21wifi: ath12k: fix regdomain update failure when connection establishesBaochen Qiang
Commit 7ed3e88664e3 ("wifi: ath12k: update regulatory rules when connection established") introduced a call to ath12k_reg_handle_chan_list() upon connection to update the regulatory domain in cfg80211 based on the power type received from the AP. However, this update fails because ah->regd_updated was already set to true during the earlier regulatory update triggered when the interface was added. To resolve this, reset ah->regd_updated before calling ath12k_reg_handle_chan_list() to ensure the update proceeds correctly. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00284-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1 Fixes: 7ed3e88664e3 ("wifi: ath12k: update regulatory rules when connection established") Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com> Link: https://patch.msgid.link/20250521-ath12k-fix-ah-regd_updated-v1-3-9737de5bf98e@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-21wifi: ath12k: fix regdomain update failure when adding interfaceBaochen Qiang
Commit 4c546023d71a ("wifi: ath12k: update regulatory rules when interface added"), introduced a call to ath12k_reg_handle_chan_list() during interface addition to update the regulatory domain based on the interface type. While this works initially, subsequent updates (e.g., after an interface delete/re-add cycle) fail because ah->regd_updated is never reset. To address this, reset ah->regd_updated before calling ath12k_reg_handle_chan_list() to allow the update to proceed. However, this change exposes another issue: a timeout occurs when waiting for the 11D scan to complete, as seen in the log: ath12k_pci 0000:05:00.0: failed to receive 11d scan complete: timed out This happens because during interface down, ar->state_11d is set to ATH12K_11D_PREPARING, and during interface up, the host waits for ar->completed_11d_scan even though the scan hasn't started yet. Fix this by updating the wait condition to check for ATH12K_11D_RUNNING, which is the only state where a scan complete event is expected. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00284-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1 Fixes: 4c546023d71a ("wifi: ath12k: update regulatory rules when interface added") Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com> Link: https://patch.msgid.link/20250521-ath12k-fix-ah-regd_updated-v1-2-9737de5bf98e@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-21wifi: ath12k: fix regdomain update failure after 11D scan completesBaochen Qiang
In the current implementation of ath12k_regd_update(), the ah->regd_updated flag is used to ensure that the regulatory domain is updated only once per radio. During MAC registration, this function is called to push the default regulatory domain to cfg80211. At that point, the hardware state is not on and hence ah->regd_updated remains false. However, after commit 4c546023d71a ("wifi: ath12k: update regulatory rules when interface added"), ath12k_reg_handle_chan_list() is invoked when an interface is added, which in turn calls ath12k_regd_update(). By this time, hardware state is on and consecutively ah->regd_updated becomes true. Later, when the 11D scan completes and a new regulatory domain is received from the firmware, the host attempts to update cfg80211 again via ath12k_regd_update(). But since ah->regd_updated is already true, the update is skipped. >From the user's perspective, this results in a failure to connect to 6 GHz APs, as the default regulatory domain (the only one pushed to cfg80211) does not include 6 GHz support. To resolve this, reset the ah->regd_updated flag when handling the 11D regulatory domain update. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00284-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1 Fixes: 591de41d7008 ("wifi: ath12k: add 11d scan offload support") Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com> Link: https://patch.msgid.link/20250521-ath12k-fix-ah-regd_updated-v1-1-9737de5bf98e@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-21wifi: mt76: mt7996: remove duplicate check in mt7996_mcu_sta_mld_setup_tlv()Dan Carpenter
The "msta_link" pointer has two NULL checks. Delete the second check. Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Acked-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://patch.msgid.link/fde7246b-08a2-4c2f-b2dc-c3fd0e6b300b@stanley.mountain Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-05-21Revert "wifi: mt76: Check link_conf pointer in mt76_connac_mcu_sta_basic_tlv()"Lorenzo Bianconi
In mt76_connac_mcu_sta_basic_tlv() link_conf is always not NULL. Revert the commit '9890624c1b39 ("wifi: mt76: Check link_conf pointer in mt76_connac_mcu_sta_basic_tlv()")' in order to fix the following warning: drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c:394 mt76_connac_mcu_sta_basic_tlv() warn: variable dereferenced before check 'link_conf' This reverts commit 9890624c1b3948c1c7f1d0e19ef0bb7680b8c80d. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://patch.msgid.link/20250325-mt76_connac_mcu_sta_basic_tlv-link_conf-revert-v1-1-b84efefb74ee@kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-05-21wifi: mt76: mt7996: fix uninitialized symbol warningsunliming
Fix below smatch warnings: drivers/net/wireless/mediatek/mt76/mt7996/main.c:952 mt7996_mac_sta_add_links() error: uninitialized symbol 'err'. drivers/net/wireless/mediatek/mt76/mt7996/main.c:1133 mt7996_set_rts_threshold() error: uninitialized symbol 'ret'. Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <error27@gmail.com> Closes: https://lore.kernel.org/r/202504101051.1ya4Z4va-lkp@intel.com/ Signed-off-by: sunliming <sunliming@kylinos.cn> Link: https://patch.msgid.link/20250419031528.2073892-1-sunliming@linux.dev Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-05-21wifi: mt76: mt7996: avoid null deref in mt7996_stop_phy()Qasim Ijaz
In mt7996_stop_phy() the mt7996_phy structure is dereferenced before the null sanity check which could lead to a null deref. Fix by moving the dereference operation after the sanity check. Fixes: 69d54ce7491d ("wifi: mt76: mt7996: switch to single multi-radio wiphy") Signed-off-by: Qasim Ijaz <qasdev00@gmail.com> Link: https://patch.msgid.link/20250421111344.11484-1-qasdev00@gmail.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-05-21wifi: mt76: mt7996: avoid NULL pointer dereference in mt7996_set_monitor()Qasim Ijaz
The function mt7996_set_monitor() dereferences phy before the NULL sanity check. Fix this to avoid NULL pointer dereference by moving the dereference after the check. Fixes: 69d54ce7491d ("wifi: mt76: mt7996: switch to single multi-radio wiphy") Signed-off-by: Qasim Ijaz <qasdev00@gmail.com> Link: https://patch.msgid.link/20250421112544.13430-1-qasdev00@gmail.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-05-21wifi: mt76: mt7921: add 160 MHz AP for mt7922 deviceSamuel Williams
This allows mt7922 in hostapd mode to transmit up to 1.4 Gbps. Signed-off-by: Samuel Williams <sam8641@gmail.com> Link: https://patch.msgid.link/20250511005316.1118961-1-sam8641@gmail.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-05-21wifi: mt76: mt7925: fix host interrupt register initializationMichael Lo
ensure proper interrupt handling and aligns with the hardware spec by updating the register offset for MT_WFDMA0_HOST_INT_ENA. Cc: stable@vger.kernel.org Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips") Signed-off-by: Michael Lo <michael.lo@mediatek.com> Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Link: https://patch.msgid.link/20250509083512.455095-1-mingyen.hsieh@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-05-21wifi: mt76: mt7925: introduce thermal protectionLeon Yen
Add thermal protection to prevent the chip from possible overheating due to prolonged high traffic and adverse operating conditions. Signed-off-by: Leon Yen <leon.yen@mediatek.com> Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Link: https://patch.msgid.link/20250509082117.453819-1-mingyen.hsieh@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-05-21wifi: mt76: mt76x2: Add support for LiteOn WN4516R,WN4519RHenk Vergonet
Adds support for: - LiteOn WN4516R - LiteOn WN4519R Both use: - A nonstandard USB connector - Mediatek chipset MT7600U - ASIC revision: 76320044 Disabled VHT support on ASIC revision 76320044: This fixes the 5G connectibity issue on LiteOn WN4519R module see https://github.com/openwrt/mt76/issues/971 And may also fix the 5G issues on the XBox One Wireless Adapter see https://github.com/openwrt/mt76/issues/200 I have looked at the FCC info related to the MT7632U chip as mentioned in here: https://github.com/openwrt/mt76/issues/459 These confirm the chipset does not support 'ac' mode and hence VHT should be turned of. Signed-off-by: Henk Vergonet <henk.vergonet@gmail.com> Acked-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://patch.msgid.link/20250418143914.31384-1-henk.vergonet@gmail.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-05-21wifi: mt76: Remove an unneeded local variable in mt76x02_dma_init()Christophe JAILLET
Remove 't' which is unneeded since commit f3950a414143 ("mt76: set txwi_size according to the driver value") This slightly simplifies the code. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://patch.msgid.link/e86d5602bdd8b6bd22258ee69536992f39470bf5.1744928865.git.christophe.jaillet@wanadoo.fr Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-05-21wifi: mt76: mt7996: prevent uninit return in mt7996_mac_sta_add_linksQasim Ijaz
If link_conf_dereference_protected() or mt7996_vif_link() or link_sta_dereference_protected() fail the code jumps to the error_unlink label and returns ret which is uninitialised. Fix this by setting err before jumping to error_unlink. Fixes: c7e4fc362443 ("wifi: mt76: mt7996: Update mt7996_mcu_add_sta to MLO support") Fixes: dd82a9e02c05 ("wifi: mt76: mt7996: Rely on mt7996_sta_link in sta_add/sta_remove callbacks") Signed-off-by: Qasim Ijaz <qasdev00@gmail.com> Link: https://patch.msgid.link/20250421110550.9839-1-qasdev00@gmail.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-05-21Revert "wifi: mt76: mt7996: fill txd by host driver"Shayne Chen
This reverts commit 3b522cadedfe6e9e0e8193d7d4ab5aa8d0c73209. The MTK connac3 has introduced new hardware, SDO (Software Defined Offload), to offload the process of filling the TX descriptor. Initially, there were some issues, but after several fixes, it should now be stable, allowing us to revert this commit. Additionally, activating SDO is essential for the proper functioning of features like TX checksum offload. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Link: https://patch.msgid.link/20250328022847.1612082-1-shayne.chen@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-05-21wifi: mt76: mt7996: Add NULL check in mt7996_thermal_initCharles Han
devm_kasprintf() can return a NULL pointer on failure,but this returned value in mt7996_thermal_init() is not checked. Add NULL check in mt7996_thermal_init(), to handle kernel NULL pointer dereference error. Fixes: 69d54ce7491d ("wifi: mt76: mt7996: switch to single multi-radio wiphy") Signed-off-by: Charles Han <hanchunchao@inspur.com> Link: https://patch.msgid.link/20250407095551.32127-1-hanchunchao@inspur.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-05-21wifi: mt76: mt7925: add EHT preamble puncturingAllan Wang
Add mt7925 EHT preamble puncturing. Signed-off-by: Allan Wang <allan.wang@mediatek.com> Link: https://patch.msgid.link/20250401083525.2734333-1-allan.wang@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-05-21wifi: mt76: mt7925: Fix logical vs bitwise typoDan Carpenter
This was supposed to be & instead of &&. Fixes: f0317215b367 ("wifi: mt76: mt7925: add EHT control support based on the CLC data") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://patch.msgid.link/d323a443-4e81-4064-8563-b62274b53ef4@stanley.mountain Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-05-21wifi: mt76: mt7996: rework radar HWRDD idxStanleyYP Wang
The definition of MT_RX_SEL (for rdd_rx_sel) is mixed with the definition of HWRDD idx. For example, MT_RX_SEL2 is for background HWRDD idx, not an option of rdd_rx_sel. Additionally, HWRDD idx does not exactly map to band idx for Connac 3 chips. So, add mt7996_get_rdd_idx as a helper function. Finally, remove some parts of the code inherited from the legacy chips. For instance, 1. rdd_state is used for single-band-dual-HWRDD chips (for 80+80), especially the 76xx series. 2. rdd_rx_sel is also used for single-band-dual-HWRDD chips rx_sel = 0 => RDD0 for WF0, RDD1 for WF2 rx_sel = 1 => RDD0 for WF1, RDD1 for WF3 Chip Variants | 5G rdd idx | Background rdd idx ---------------------------|----------------|------------------- MT7996 (except 205/255) | 1 | 2 MT7992 | 1 | 2 MT7990 | 1 | 2 Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> Reviewed-by: Shayne Chen <shayne.chen@mediatek.com> Reviewed-by: Money Wang <money.wang@mediatek.com> Link: https://patch.msgid.link/20250320015926.3948672-1-StanleyYP.Wang@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-05-21wifi: mt76: mt7915: rework radar HWRDD idxStanleyYP Wang
The definition of MT_RX_SEL (for rdd_rx_sel) is mixed with the definition of HWRDD idx. For example, MT_RX_SEL2 is for background HWRDD idx, not an option of rdd_rx_sel. Therefore, add mt7915_get_rdd_idx as a helper function to get the HWRDD idx for each variants. Additionally, remove some parts of the code inherited from the legacy chips. For instance, 1. rdd_state is used for single-band-dual-HWRDD chips (for 80+80), especially the 76xx series. 2. rdd_rx_sel is also used for single-band-dual-HWRDD chips rx_sel = 0 => RDD0 for WF0, RDD1 for WF2 rx_sel = 1 => RDD0 for WF1, RDD1 for WF3 Chip Variants | 5G rdd idx(=bandidx)| Background rdd idx -------------------------------|---------------------|------------------- MT7915A | 0 | 2 MT7915D | 1 | 2 MT7916 2G + 5G (2T2R+1R) | 1 | 2 MT7916 2G + 5G (3T3R) | 1 | N/A MT7981 2G + 5G | 1 | N/A MT7986 2G + 5G (one adie DBDC) | 1 | N/A MT7986 5G (one adie) | 1 (bandidx=MT_BAND1)| N/A MT7986 2G + 5G (dual adie) | 1 | N/A Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> Reviewed-by: Shayne Chen <shayne.chen@mediatek.com> Link: https://patch.msgid.link/20250320015918.3948643-1-StanleyYP.Wang@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-05-21wifi: mt76: mt7915: set correct background radar capabilityStanleyYP Wang
Some of the variants do not support background radar, so add a helper to report background radar capability. For mt7916, only the variant of 5G 2T2R + 1R supports background radar. Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> Reviewed-by: Shayne Chen <shayne.chen@mediatek.com> Link: https://patch.msgid.link/20250320015909.3948612-1-StanleyYP.Wang@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-05-21wifi: mt76: mt7996: add PCI device id for mt7990Peter Chiu
Add PCI device IDs to enable support for mt7990 chipsets. Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Link: https://patch.msgid.link/20250409140750.724437-11-shayne.chen@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-05-21wifi: mt76: mt7996: rework background radar check for mt7990StanleyYP Wang
The MT7990 comes in 2T2R and 3T3R variants, with only the 2T2R supporting background radar. Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Link: https://patch.msgid.link/20250409140750.724437-10-shayne.chen@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-05-21wifi: mt76: connac: rework TX descriptor and TX free for mt7990Shayne Chen
Adjust the TX descriptor and TX free for updated hardware fields. This is a preliminary patch to support mt7990 chipset. Co-developed-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> Co-developed-by: Benjamin Lin <benjamin-jw.lin@mediatek.com> Signed-off-by: Benjamin Lin <benjamin-jw.lin@mediatek.com> Co-developed-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Link: https://patch.msgid.link/20250409140750.724437-9-shayne.chen@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-05-21wifi: mt76: mt7996: adjust HW capabilities for mt7990Peter Chiu
This is a preliminary patch to support mt7990 chipset. Co-developed-by: Howard Hsu <howard-yh.hsu@mediatek.com> Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com> Co-developed-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Link: https://patch.msgid.link/20250409140750.724437-8-shayne.chen@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-05-21wifi: mt76: mt7996: add eeprom support for mt7990StanleyYP Wang
Add eeprom definition and default bin file for mt7990. This is a preliminary patch to support mt7990 chipset. Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Link: https://patch.msgid.link/20250409140750.724437-7-shayne.chen@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-05-21wifi: mt76: mt7996: rework register mapping for mt7990StanleyYP Wang
Rework register offset and l1/l2/cbtop mapping for mt7990. This is a preliminary patch to support mt7990 chipset. Co-developed-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Co-developed-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> Link: https://patch.msgid.link/20250409140750.724437-6-shayne.chen@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-05-21wifi: mt76: mt7996: rework DMA configuration for mt7990Peter Chiu
Modify DMA ring setting for mt7990. This is a preliminary patch to support mt7990 chipset. Co-developed-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Link: https://patch.msgid.link/20250409140750.724437-5-shayne.chen@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-05-21wifi: mt76: mt7996: rework WA mcu command for mt7990Peter Chiu
Since mt7990 lacks WA firmware, some WA commands are not supported or need to be refactored to use the SDO command. This is a preliminary patch to support mt7990 chipset. Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Link: https://patch.msgid.link/20250409140750.724437-4-shayne.chen@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-05-21wifi: mt76: connac: add support to load firmware for mt7990StanleyYP Wang
Add firmware download support. Note that mt7990 does not have WA and DSP firmwares. This is a preliminary patch to support mt7990 chipset. Co-developed-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Link: https://patch.msgid.link/20250409140750.724437-3-shayne.chen@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-05-21wifi: mt76: mt7996: add macros for pci device idsShayne Chen
The chipset name (i.e., brand name) used by the driver may cause confusion with the PCI device ID when adding support for new chipsets. | Chipset name | PCI device id | |--------------|----------------| | 7996 | 0x7990, 0x7991 | | 7992 | 0x7992, 0x799a | | 7990 | 0x7993, 0x799b | To prevent confusion, replace the code that directly uses the device ID with macros. This is a preliminary patch to support mt7990 chipset. Co-developed-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Link: https://patch.msgid.link/20250409140750.724437-2-shayne.chen@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2025-05-21wifi: p54: prevent buffer-overflow in p54_rx_eeprom_readback()Christian Lamparter
Robert Morris reported: |If a malicious USB device pretends to be an Intersil p54 wifi |interface and generates an eeprom_readback message with a large |eeprom->v1.len, p54_rx_eeprom_readback() will copy data from the |message beyond the end of priv->eeprom. | |static void p54_rx_eeprom_readback(struct p54_common *priv, | struct sk_buff *skb) |{ | struct p54_hdr *hdr = (struct p54_hdr *) skb->data; | struct p54_eeprom_lm86 *eeprom = (struct p54_eeprom_lm86 *) hdr->data; | | if (priv->fw_var >= 0x509) { | memcpy(priv->eeprom, eeprom->v2.data, | le16_to_cpu(eeprom->v2.len)); | } else { | memcpy(priv->eeprom, eeprom->v1.data, | le16_to_cpu(eeprom->v1.len)); | } | [...] The eeprom->v{1,2}.len is set by the driver in p54_download_eeprom(). The device is supposed to provide the same length back to the driver. But yes, it's possible (like shown in the report) to alter the value to something that causes a crash/panic due to overrun. This patch addresses the issue by adding the size to the common device context, so p54_rx_eeprom_readback no longer relies on possibly tampered values... That said, it also checks if the "firmware" altered the value and no longer copies them. The one, small saving grace is: Before the driver tries to read the eeprom, it needs to upload >a< firmware. the vendor firmware has a proprietary license and as a reason, it is not present on most distributions by default. Cc: <stable@kernel.org> Reported-by: Robert Morris <rtm@mit.edu> Closes: https://lore.kernel.org/linux-wireless/28782.1747258414@localhost/ Fixes: 7cb770729ba8 ("p54: move eeprom code into common library") Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Link: https://patch.msgid.link/20250516184107.47794-1-chunkeey@gmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-05-21wifi: check if socket flags are validBert Karwatzki
Checking the SOCK_WIFI_STATUS flag bit in sk_flags may give wrong results since sk_flags are part of a union and the union is used otherwise. Add sk_requests_wifi_status() which checks if sk is non-NULL, sk is a full socket (so flags are valid) and checks the flag bit. Fixes: 76a853f86c97 ("wifi: free SKBTX_WIFI_STATUS skb tx_flags flag") Suggested-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Bert Karwatzki <spasswolf@web.de> Reviewed-by: Jason Xing <kerneljasonxing@gmail.com> Link: https://patch.msgid.link/20250520223430.6875-1-spasswolf@web.de [edit commit message, fix indentation] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-05-20wifi: ath12k: fix mac pdev frequency range updateAditya Kumar Singh
The current implementation of per-pdev frequency range updates assumes that each pdev supports only a single band. As a result in ath12k_regd_update(), bands are handled using an if-else structure, which limits updates to only one of the band per pdev. This assumption does not hold for all chipsets. For example, the WCN7850 supports multiple bands within a single pdev. Hence to accommodate such cases, update the logic to account for all band cases by handling each band in a separate if conditions instead of the previous if-else structure. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 Fixes: 13324cecbb2c ("wifi: ath12k: Update frequency range if reg rules changes") Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250520-fix_freq_range_update-v1-1-e061fd147b87@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-20wifi: carl9170: micro-optimize carl9170_tx_shift_bm()Yury Norov
The function calls bitmap_empty() just before find_first_bit(). Both functions are O(N). Because find_first_bit() returns >= nbits in case of empty bitmap, the bitmap_empty() test may be avoided. Signed-off-by: Yury Norov <yury.norov@gmail.com> Acked-by: Christian Lamparter <chunkeey@gmail.com> Link: https://patch.msgid.link/20250326155200.39895-1-yury.norov@gmail.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-20wifi: ath9k_htc: Abort software beacon handling if disabledToke Høiland-Jørgensen
A malicious USB device can send a WMI_SWBA_EVENTID event from an ath9k_htc-managed device before beaconing has been enabled. This causes a device-by-zero error in the driver, leading to either a crash or an out of bounds read. Prevent this by aborting the handling in ath9k_htc_swba() if beacons are not enabled. Reported-by: Robert Morris <rtm@csail.mit.edu> Closes: https://lore.kernel.org/r/88967.1743099372@localhost Fixes: 832f6a18fc2a ("ath9k_htc: Add beacon slots") Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk> Link: https://patch.msgid.link/20250402112217.58533-1-toke@toke.dk Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-20wifi: ath12k: remove redundant regulatory rules intersection logic in hostAishwarya R
Whenever there is a change in the country code settings from the user, driver does an intersection of the regulatory rules for this new country with the original regulatory rules which were reported during initialization time. There is also similar logic running in firmware with a difference that the intersection in firmware is only done when the country code is configuration during boot up time (BDF/OTP). Firmware logic does not kick in when no country code is configured during device bring up time as the device is always expected to have the country code configured properly in the deployment. There is a debug/test use case that requires absolute regulatory rules to be used for a user configured country code when the device is not configured with a particular country code during boot up time. To support the above test use case, remove the redundant regulatory rules intersection logic in the host driver. Depend on the intersection logic in firmware when the device comes up with pre-configured country code. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00209-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Aishwarya R <quic_aisr@quicinc.com> Signed-off-by: Rajat Soni <quic_rajson@quicinc.com> Link: https://patch.msgid.link/20250505034351.1365914-1-quic_rajson@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-20wifi: ath12k: Send MCS15 support to firmware during peer assocMohan Kumar G
As per IEEE 802.11be-2024 - 9.4.2.321, EHT operation element contains MCS15 Disable subfield as the sixth bit, which is set when MCS15 support is not enabled. During association, firmware will use this MCS15 flag to enable or disable the reception of PPDU with EHT-MCS15 capability. Send MCS15 support to firmware through WMI command during peer assoc. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Co-developed-by: Dhanavandhana Kannan <quic_dhanavan1@quicinc.com> Signed-off-by: Dhanavandhana Kannan <quic_dhanavan1@quicinc.com> Signed-off-by: Mohan Kumar G <quic_mkumarg@quicinc.com> Link: https://patch.msgid.link/20250505153536.3275145-1-quic_mkumarg@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-05-19wifi: ath12k: Fix scan initiation failure handlingVignesh C
During a code review, it is observed that in the scenario where scan initiation fails, the current code schedules the ar->scan.timeout workqueue which is not necessary. In the scan initiation failure scenario, exit the code instead of scheduling the ar->scan.timeout workqueue. Compile tested only. Signed-off-by: Vignesh C <quic_vignc@quicinc.com> Link: https://patch.msgid.link/20250512065849.2833232-1-quic_vignc@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-03 23:18:31 +0000