summaryrefslogtreecommitdiff
path: root/drivers/net/wireless
AgeCommit message (Collapse)Author
2017-04-13rtlwifi: btcoex: 23b 2ant: tell fw if external or internal switch is usedYan-Hsuan Chuang
Some chips use an external antenna switch, but fw may not realize it. Here we tell fw exactly that which type of switch we are using. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13rtlwifi: btcoex: 23b 2ant: workaround for bt a2dp and hidYan-Hsuan Chuang
For a2dp and hid, we need extra process to avoid voice degradation Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13rtlwifi: btcoex: 23b 2ant: check more cases when bt is queuingYan-Hsuan Chuang
If bt is queing, we need to set the packet priority properly. Originally we only consider if wifi was connected or not, but now we also consider if bt is under abnormal scan or wifi is scanning, roaming or linking, and set the coex table. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13rtlwifi: btcoex: 23b 2ant: add pnp notidy to avoid LPS/IPS mismatchYan-Hsuan Chuang
When driver is going to sleep, it does not leave LPS/IPS, thus the BTCoex may have mismatch when driver wakes up. To avoid that, BTCoex needs to clear the IPS/LPS state when it receives a pnp notify, then it can properly set up the hw when driver wakes up. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13rtlwifi: btcoex: 23b 2ant: fix PTA unstable problem when hw initYan-Hsuan Chuang
In the hardware initialisation stage, the PTA circuits may be unstable, so we reset it after 6 secs to fix the problem. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13rtlwifi: btcoex: 23b 2ant: more cases for adjusting tdma durationYan-Hsuan Chuang
These cases are for the btcoex to tune the performance Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13rtlwifi: btcoex: 23b 2ant: detect ap num and set GNT_BT properlyYan-Hsuan Chuang
If ap num < 10, let wifi and bt transmit simultaneously, otherwise set wifi into standy when bt is transmitting Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13rtlwifi: btcoex: 23b 2ant: rename tdma_adj_type to ps_tdma_du_adj_typeYan-Hsuan Chuang
The variable is for PS tdma duration adjust, so rename it to clearly to specify its usage. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13rtlwifi: btcoex: 23b 2ant: check PS state before setting tdma durationYan-Hsuan Chuang
For time division multiple access, the wifi and bt take turns to transmit, but we need to let AP know that wifi is under standby mode by sending null data to "pretend" entering power saving state using lps rpwm. But, the fw does not know if it is the actual power saving mode or just a fake one to cheat to the AP. Hence, before fw setting the tdma duration, the fw needs the driver to check the power saving state first. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13brcmfmac: only add channels and ssids once in scan requestArend Van Spriel
When receiving pno results there may be duplicate channels and/or ssids. Assure each is added only once when preparing the internal escan request. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13brcmfmac: remove bogus check in scheduled scan result handlerArend Van Spriel
Checking whether the address of an array element is null is bogus so removing it. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13brcmfmac: add length checks in scheduled scan result handlerArend Van Spriel
Assure the event data buffer is long enough to hold the array of netinfo items and that SSID length does not exceed the maximum of 32 characters as per 802.11 spec. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13brcmfmac: remove reference to fwsignal data from struct brcmf_pubArend Van Spriel
The fwsignal module is part of the bcdc protocol and as such does its instance data is not needed in core structure. Moving it into struct brcmf_bcdc instead. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13brcmfmac: ignore interfaces when fwsignal is disabledArend Van Spriel
When brcmf_fws_add_interface() is called the struct brcmf_if::fws_desc field is initialized regardless the state of the fwsignal functionality, ie. the fcmode. This is not needed when fcmode is NONE, which is the default mode. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13brcmfmac: rename brcmf_fws_{de,}init to brcmf_fws{at,de}tachArend Van Spriel
This is a non-functional change to align the fwsignal module to the naming pattern used throughout the driver. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13brcmfmac: properly align buffers on certain platforms with 64 bit DMAHeiner Kallweit
Systems with 64 bit DMA at least partially require buffers to be used for DMA to be 8-byte-aligned. One example is Amlogic Meson GX. Switching the MMC/SDIO driver for this platform to SG DMA mode resulted in problems due to unaligned buffers. Fortunately the brcmfmac driver has a global define for the alignment. Changing it to 8 fixed the issues with Meson GX. Suggested-by: Helmut Klein <hgkr.klein@gmail.com> Tested-by: Helmut Klein <hgkr.klein@gmail.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13mwifiex: Fix invalid port issueGanapathi Bhat
We have to use start port, for TX/RX of single packet, instead of current aggregating port. This will fix SDIO CMD53(TX/RX) returning -ETIMEDOUT and halting the data path. Fixes: 0cb52aac4d19 ("mwifiex: do not set multiport flag for tx/rx single packet") Signed-off-by: Ganapathi Bhat <gbhat@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13wil6210: prevent access to 11AD device if resume failsMaya Erez
In case wil6210 resume fails, wil6210 suspend function will try to access the suspended device in the next kernel suspend. To prevent that, add wil_status_suspended flag to indicate if the device is already suspended and clear it only if the resume succeeds. Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-04-13wil6210: fix array out of bounds access in pmcDedy Lansky
Array index 'i' is used before limits check. Fix this by doing limits check first. Signed-off-by: Dedy Lansky <qca_dlansky@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-04-13wil6210: remove HALP voting in debugfs ioblobMaya Erez
debugfs ioblob function is called by the FW logs scripts to copy the FW logs via PCIe. As the FW logs collection is done in parallel to the operational 11AD actions, the HALP voting can take place during 11AD reset flow and other sensitive scenarios. To prevent that, remove HALP voting from the ioblob function. Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-04-13wil6210: fix memory access violation in wil_memcpy_from/toio_32Dedy Lansky
In case count is not multiple of 4, there is a read access in wil_memcpy_toio_32() from outside src buffer boundary. In wil_memcpy_fromio_32(), in case count is not multiple of 4, there is a write access to outside dst io memory boundary. Fix these issues with proper handling of the last 1 to 4 copied bytes. Signed-off-by: Dedy Lansky <qca_dlansky@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-04-13wil6210: fix check for sparrow D0 FW fileHamad Kadmany
Driver fails to load FW for sparrow D0 devices in some cases. Fix this by returning correct value from wil_fw_verify_file_exists when D0 FW file is not detected for any reason. Signed-off-by: Hamad Kadmany <qca_hkadmany@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-04-13wil6210: protect against sporadic interrupt during suspend flowMaya Erez
During the suspend flow, wil6210 HW can send sporadic interrupts, while PCIe bus is not operational. To prevent that, keep the interrupts disabled during the suspend flow and re-enable them only after PCIe enablement in resume. Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-04-13wil6210: fix protection against connections during resetHamad Kadmany
Existing code that ignores connection events during reset flow will never take effect since it locks the same mutex taken by the reset flow. In addition, in case of unsolicited disconnect events ignore those as well since device is about to get reset. Signed-off-by: Hamad Kadmany <qca_hkadmany@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-04-13wil6210: align to latest auto generated wmi.hDedy Lansky
Align to latest version of the auto generated wmi file describing the interface with FW Signed-off-by: Dedy Lansky <qca_dlansky@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-04-13wil6210: support 8KB RX buffersLior David
The 11ad spec requires 11ad devices to be able to receive 8KB packets over the air. Currently this is only possible by loading the driver with mtu_max=7912 but this also forces a smaller block ACK window size which reduces performance for stations which transmit normal sized packets (<2KB). Fix this problem as follows: 1. Add a module parameter rx_large_buf that when set, will allocate 8KB RX buffers regardless of mtu_max setting. 2. When receiving block ACK request agree to any window size not above our maximum, regardless of the mtu_max setting. This means if the other side transmits small packets (2KB) it can still set up block ACK with a large window size, and get better performance. Signed-off-by: Lior David <qca_liord@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-04-13wil6210: restore power save state after internal FW resetLazar Alexei
The power save profile is set to default state in case of FW reset, regardless of the state before the reset took place. Fix this by saving the current power save profile and restore it in case of FW reset. Signed-off-by: Lazar Alexei <qca_ailizaro@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-04-13wil6210: fix sequence for scan-abort during resetHamad Kadmany
Communication with FW must be done before wil->status is initialized in order to properly handle cases where communication with FW halts during reset sequence. Signed-off-by: Hamad Kadmany <qca_hkadmany@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-04-13ath10k: fix compile time sanity check for CE4 buffer sizeMohammed Shafi Shajakhan
In 'ath10k_ce_alloc_pipe' the compile time sanity check to ensure that there is sufficient buffers in CE4 for HTT Tx MSDU descriptors, but this did not take into account of the case with 'peer flow control' enabled, fix this. Cc: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-04-13ath6kl: add __printf verification to ath6kl_dbgJoe Perches
Fix fallout too. Signed-off-by: Joe Perches <joe@perches.com> Reviewed-by: Steve deRosier <derosier@gmail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-04-13mac80211_hwsim: use per-interface power levelJohannes Berg
When channel contexts are used, there's no global power level (the power_level is always 0). Use the per-interface TX power in mac80211_hwsim to have a proper setting for both cases. This fixes the bgscan_simple and bgscan_learn test cases when the number of channels advertised by hwsim is >1 by default. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-13cfg80211: move add/change interface monitor flags into paramsJohannes Berg
Instead passing both flags, which can be NULL, and vif_params, which are never NULL, move the flags into the vif_params and use BIT(0), which is invalid from userspace, to indicate that the flags were changed. While updating all drivers, fix a small bug in wil6210 where it was setting the flags to 0 instead of leaving them unchanged. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-11iwlwifi: mvm: separate queue mapping from queue enablementSara Sharon
As preparation for a000 different queue management, separate mapping of queues from actual enablement. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-04-11iwlwifi: mvm: remove call for paging in new init flowSara Sharon
Now that transport inits the paging in the context info - remove the call in mvm. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-04-11iwlwifi: pcie: add context information supportSara Sharon
Context information structure is going to be used in a000 devices for firmware self init. The self init includes firmware self loading from DRAM by ROM. This means the TFH relevant firmware loading can be cleaned up. The firmware loading includes the paging memory as well, so op mode can stop initializing the paging and sending the DRAM_BLOCK_CMD. Firmware is doing RFH, TFH and SCD configuration, while driver only fills the required configurations and addresses in the context information structure. The only remaining access to RFH is the write pointer, which is updated upon alive interrupt after FW configured the RFH. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-04-11iwlwifi: pcie: introduce split point to a000 devicesSara Sharon
a000 devices are going to have a lot of flows simplified and changed: init flow, RX, TX, and more. This, combined with the fact that code is already very complicated due to backward compatibility - introduce a split that will enable to introduce simplified version of functions. Shared ops are moved to a macro, while functions that will be updated in the next patches are defined twice for now. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-04-11iwlwifi: remove unnecessary dev_cmd_headroom parameterLuca Coelho
We don't need this parameter anymore, since we always pass 0 anyway. Remove it from the structure and from all the relevant functions. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-04-11iwlwifi: mvm: support MFUART dump in case of MFUART assertGolan Ben-Ami
In case of a MFUART assert, get a notification from the fw that consists of the assert id and debug data. The notification may be divided to multiple chunks, depending on the size of the debug data sent to the driver, which would be up to 1KB. Get the notification, and if the debug info flag is enabled, print the debug data to the dmesg. Signed-off-by: Golan Ben-Ami <golan.ben.ami@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-04-11iwlwifi: pcie: use iwl_get_dma_hi_addr()Johannes Berg
Use iwl_get_dma_hi_addr() instead of open-coding it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-04-11iwlwifi: pcie: use WFPM_GP for debugging D3 flowsSara Sharon
This register is helpful for debugging D3 issues. Driver turns all bits on, and then on exit reads the updated value there. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-04-11iwlwifi: pcie: remove the active field in struct iwl_txqSara Sharon
We already have queue_used in the transport - we can use it instead. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-04-11Revert "iwlwifi: introduce trans API to get byte count table"Sara Sharon
This reverts commit 8aacf4b73fe8 ("iwlwifi: introduce trans API to get byte count table"). The commit is not needed as a better approach will be taken. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-04-11iwlwifi: mvm: don't assume static queue numbersSara Sharon
In a000 devices FW will assign the queue number. Prepare for that by getting rid of static defines and store them in variables. Enlarge to u16 since we may have up to 512 queues. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-04-11iwlwifi: mvm: optimize reorder timeout frame releasingSara Sharon
Currently we release up to the last expired frame. However, if there are consecutive frames after it - we can optimize it further and release them as well - until the next hole. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-04-11iwlwifi: mvm: support new ADD_MODIFY_STA_KEY commandSara Sharon
The command was changed to support PN offload and TKIP offload. The FW will do TKIP calculations in D0 only for a000 devices, but API is aligned anyway. However, for all devices we can stop sending the wowlan tkip command. Firmware will fetch the keys from the station key command. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-04-11iwlwifi: mvm: add multicast stationSara Sharon
Currently multicast queue is associated with the broadcast station. This raises quite a few issues: The multicast queue has a special treatment: - It is sent in the MAC context command - It is excluded from tfd_queue_mask In DQA mode we end up enabling two queues - the probe response queue and the multicast queue - with the same station (broadcast) and TID while in DQA mode it should be unique RA-TID. Firmware will enforce it for a000 devices, so this allocation will fail. In addition, in a000 devices the FW will set the FIFO and not the driver. So there is a need for FW to know when we enable the queue that it is multicast queue so it will be bound to the multicast FIFO. There is no such way in current design. In order to simplify driver and firmware handling of this queue create a multicast station. This solves the unique RA-TID issue in the short term and serves as preparation for the long term. In the long term we will also add a flag marking this station for the FW as the multicast station. Once we will do that the FW will know this is the multicast queue immediately when it is added and bind it to the correct FIFO. It will also enable removing the special treatment of the queue in the MAC context command. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-04-11iwlwifi: add support for 9000 HW B-step NICsLiad Kaufman
Once we remove support for A-step, we'll be able to clean the code back again. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-04-11iwlwifi: use upper_32_bits/lower_32_bits where appropriateJohannes Berg
That's a bit nicer than open-coding it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-04-11iwlwifi: mvm: cleanup pending frames in DQA modeSara Sharon
When a station is asleep, the fw will set it as "asleep". All queues that are used only by one station will be stopped by the fw. In pre-DQA mode this was relevant for aggregation queues. However, in DQA mode a queue is owned by one station only, so all queues will be stopped. As a result, we don't expect to get filtered frames back to mac80211 and don't have to maintain the entire pending_frames state logic, the same way as we do in aggregations. The correct behavior is to align DQA behavior with the aggregation queue behaviour pre-DQA: - Don't count pending frames. - Let mac80211 know we have frames in these queues so that it can properly handle trigger frames. When a trigger frame is received, mac80211 tells the driver to send frames from the queues using release_buffered_frames. The driver will tell the fw to let frames out even if the station is asleep. This is done by iwl_mvm_sta_modify_sleep_tx_count. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-04-11iwlwifi: pcie: print less data upon firmware crashEmmanuel Grumbach
We don't need to print so much data in the kernel log. Limit the data to be printed to the queue that actually got stuck in case of a TFD queue hang, and stop dumping all the CSR and FH registers. Over the course of time, the CSR and FH values haven't proven themselves to be really useful for debugging, and they are now in the firmware dump anyway. This comes as a preparation to the addition of more data required to be printed by the firwmare team. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-31 05:24:22 +0000