summaryrefslogtreecommitdiff
path: root/drivers/net/wireless
AgeCommit message (Collapse)Author
2023-05-05wifi: ath10k: Use list_count_nodes()Christophe JAILLET
ath10k_wmi_fw_stats_num_peers() and ath10k_wmi_fw_stats_num_vdevs() really look the same as list_count_nodes(), so use the latter instead of hand writing it. The first ones use list_for_each_entry() and the other list_for_each(), but they both count the number of nodes in the list. Compile tested only. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/e6ec525c0c5057e97e33a63f8a4aa482e5c2da7f.1682541872.git.christophe.jaillet@wanadoo.fr
2023-05-05wifi: ath10k: Serialize wake_tx_queue opsAlexander Wetzel
Serialize the ath10k implementation of the wake_tx_queue ops. ath10k_mac_op_wake_tx_queue() must not run concurrent since it's using ieee80211_txq_schedule_start(). The intend of this patch is to sort out an issue discovered in the discussion referred to by the Link tag. I can't test it with real hardware and thus just implemented the per-ac queue lock Felix suggested. One obvious alternative to the per-ac lock would be to bring back the txqs_lock commit bb2edb733586 ("ath10k: migrate to mac80211 txq scheduling") dropped. Fixes: bb2edb733586 ("ath10k: migrate to mac80211 txq scheduling") Reported-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/519b5bb9-8899-ae7c-4eff-f3116cdfdb56@nbd.name CC: <stable@vger.kernel.org> Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230323165527.156414-1-alexander@wetzel-home.de
2023-05-05wifi: ath12k: fix potential wmi_mgmt_tx_queue race conditionKarthik M
During stress test with maximum VAPs and peer connected, below warning is seen: [ 1079.110967] ath12k_pci 0004:01:00.0: mgmt tx queue is full [ 1079.117708] ath12k_pci 0004:01:00.0: failed to queue management frame -28 [ 1079.123191] ath12k_pci 0004:01:00.0: mgmt tx queue is full [ 1079.129960] ath12k_pci 0004:01:00.0: failed to queue management frame -28 [ 1079.135641] ath12k_pci 0004:01:00.0: mgmt tx queue is full This is caused by potential race condition while accessing skb_queue_len(). When ath12k_mgmt_over_wmi_tx_work() and ath12k_mac_mgmt_tx() is called concurrently, then skb_queue_len() might fetch list length which is modified by skb_queue_tail() or skb_dequeue(). Replace skb_queue_len() with skb_queue_len_lockless() which will prevent concurrent modified access using READ_ONCE(). And also use '>=', in case we queue a few SKBs simultaneously. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Karthik M <quic_karm@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230419095758.19998-1-quic_rgnanase@quicinc.com
2023-05-05wifi: ath12k: add wait operation for tx management packets for flush from ↵Karthik M
mac80211 Transmission of management packets are done in a work queue. Sometimes the workqueue does not finish Tx immediately, then it lead after the next step of vdev delete finished, it start to send the management packet to firmware and lead firmware crash. ieee80211_set_disassoc() have logic of ieee80211_flush_queues() after it send_deauth_disassoc() to ath12k, its purpose is make sure the deauth was actually sent, so it need to change ath12k to match the purpose of mac80211. To address these issues wait for Tx management as well as Tx data packets. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Karthik M <quic_karm@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230419095738.19859-1-quic_rgnanase@quicinc.com
2023-05-05wifi: mt7601u: delete dead code checking debugfs returnsWang Jikai
Smatch reports that: drivers/net/wireless/mediatek/mt7601u/debugfs.c:130 mt7601u_init_debugfs() warn: 'dir' is an error pointer or valid". Debugfs code is not supposed to need error checking so instead of changing this to if (IS_ERR()) the correct thing is to just delete the dead code. Signed-off-by: Wang Jikai <wangjikai@hust.edu.cn> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230421092200.24456-1-wangjikai@hust.edu.cn
2023-05-05wifi: mwifiex: Use list_count_nodes()Christophe JAILLET
mwifiex_wmm_list_len() is the same as list_count_nodes(), so use the latter instead of hand writing it. Turn 'ba_stream_num' and 'ba_stream_max' in size_t to keep the same type as what is returned by list_count_nodes(). Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/e77ed7f719787cb8836a93b6a6972f4147e40bc6.1682537509.git.christophe.jaillet@wanadoo.fr
2023-05-05wifi: rtw89: fix rtw89_read_chip_ver() for RTL8852B and RTL8851BDan Carpenter
The if statement is reversed so it will not record the chip version. This was detected using Smatch: drivers/net/wireless/realtek/rtw89/core.c:3593 rtw89_read_chip_ver() error: uninitialized symbol 'val'. Fixes: a6fb2bb84654 ("wifi: rtw89: read version of analog hardware") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/e4d912a2-37f8-4068-8861-7b9494ae731b@kili.mountain
2023-05-05wifi: rtw89: 8851b: rfk: add IQKPing-Ke Shih
IQ signal calibration is a very important calibration to yield good RF performance. We do this calibration only if we are going to run on AP channel. During scanning phase, without this calibration RF performance is still acceptable because it transmits with low data rate at this phase. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230424065242.17477-6-pkshih@realtek.com
2023-05-05wifi: rtw89: 8851b: rfk: add DACKPing-Ke Shih
DACK (digital-to-analog converters calibration) is used to calibrate DAC to output good quality signals. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230424065242.17477-5-pkshih@realtek.com
2023-05-05wifi: rtw89: 8851b: rfk: add RCKPing-Ke Shih
RCK is synchronize RC calibration. Driver triggers this calibration and sets the result to register. This calibration is needed once when interface is going to up. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230424065242.17477-4-pkshih@realtek.com
2023-05-05wifi: rtw89: 8851b: rfk: add AACKPing-Ke Shih
Automatic amplitude control calibration (AACK) is the calibration to ensure the oscillator is biased for a constant output amplitude. We do this calibration if card does power on. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230424065242.17477-3-pkshih@realtek.com
2023-05-05wifi: rtw89: 8851b: add set_channel_rf()Ping-Ke Shih
Add to set RF registers according to the channel we want to switch. The callers will be added afterward. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230424065242.17477-2-pkshih@realtek.com
2023-05-05wifi: rtw89: 8851b: add DLE mem and HFC quotaPing-Ke Shih
Configure DLE (data link engine) memory size for operating modes. Similarly, HFC standing for HCI flow control is used to set quota according to operating modes, which are SCC or download firmware. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230421024551.29994-9-pkshih@realtek.com
2023-05-05wifi: rtw89: 8851b: add support WoWLAN to 8851BChih-Kang Chang
Add WoWLAN stub to 8851B, and decalre this chip can support magic packet and disconnect wakeup. Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230421024551.29994-8-pkshih@realtek.com
2023-05-05wifi: rtw89: change naming of BA CAM from V1 to V0_EXTPing-Ke Shih
BA CAM of 8852C has more entries and more fields of H2C, and needs initialization before using. Due to differences from 8852A/8852B, we name it as V1 before. However, real V1 of BA CAM is introduced now, so change it to V0_EXT to avoid confusing with firmware design. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230421024551.29994-7-pkshih@realtek.com
2023-05-05wifi: rtw89: use chip_info::small_fifo_size to choose debug_maskPing-Ke Shih
Previously, 8852B has smaller FIFO size than others, so I use chip_id to choose debug_mask before. 8851B has similar design, so add a field to chip_info as a general expression. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230421024551.29994-6-pkshih@realtek.com
2023-05-05wifi: rtw89: add CFO XTAL registers field to support 8851BChia-Yuan Li
Since CFO XTAL registers of 8851B is different from 8852A, add a chip_info field to define their difference. Other chips use another interface, so fill NULL to this field. Signed-off-by: Chia-Yuan Li <leo.li@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230421024551.29994-5-pkshih@realtek.com
2023-05-05wifi: rtw89: 8851b: add NCTL post tablePing-Ke Shih
NCTL (nano-controller) is used to assist RF calibration that sends commands to NCTL so it can reduce IO from driver. 8851B needs additional settings, so add a table to do things. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230421024551.29994-4-pkshih@realtek.com
2023-05-05wifi: rtw89: 8851be: add 8851BE PCI entry and fill PCI capabilitiesPing-Ke Shih
Add PCI entry to 8851BE with its device ID 10ec:b851, also fill PCI info according to its capabilities. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230421024551.29994-3-pkshih@realtek.com
2023-05-05wifi: rtw89: 8851b: add 8851B basic chip_infoPing-Ke Shih
8851B is a 1x1 80 MHz bandwidth chip working on 2/5 GHz. Add these basic information, and more settings will be added by functions. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230421024551.29994-2-pkshih@realtek.com
2023-05-05wifi: rtw89: scan offload wait for FW done ACKZong-Zhe Yang
The following are scan offload related H2C (host to chip) function types. * H2C_FUNC_ADD_SCANOFLD_CH * H2C_FUNC_SCANOFLD Before doing FW scan, we will continuously send multiple H2Cs with above types which are used to tell FW the scan configuration of this time. But, if FW doesn't handle one of these H2Cs well, the FW scan process might not run as expected and driver should notice it early. So, this commits makes scan offload related H2Cs wait for FW done ACK via rtw89_wait_for_cond() and rtw89_complete_cond(). And, we check the return code of these H2Cs from FW. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/a15f4bd594f71d7602ea67698b035805143700c9.camel@realtek.com
2023-05-05wifi: rtw89: mac: handle C2H receive/done ACK in interrupt contextZong-Zhe Yang
We have some MAC H2Cs (host to chip packets), which have no clear individual C2Hs (chip to host packets) to indicate FW execution response, but they are going to require to wait for FW completion. So, we have to deal with this via common MAC C2H receive/done ACKs. This commit changes the context, where common MAC C2H receive/done ACK handlers are executed, to interrupt context. And, code comments are added to prevent future commits from using it incorrectly. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/c4d766885e00b9f9dcf7954a80096c8b9d21149b.camel@realtek.com
2023-05-05wifi: rtw89: packet offload wait for FW responseZong-Zhe Yang
The H2Cs (host to chip packets) related to packet offload functions need to wait for FW responses in case FW state machine gets wrong and makes driver status no longer able to align FW one. In flow, driver may continuously send multiple H2Cs of packet offload series. If somehow FW doesn't deal with the former yet but the latter has gotten in, it might cause the problem mentioned above. So, we block these H2Cs by rtw89_wait_for_cond(). And then, when the corresponding C2Hs (chip to host packets) is received, we call rtw89_complete_cond(). Besides, RTW89_MAC_C2H_FUNC_PKT_OFLD_RSP's C2H handler should be executed in interrupt context to make our wait/complete process work as expected. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/9ae8c1f105901c65e3171276a9fd6c99ae51803f.camel@realtek.com
2023-05-05wifi: rtw89: refine packet offload delete flow of 6 GHz probeZong-Zhe Yang
There are two places where offload packets of 6 GHz probe would be deleted from FW, i.e. calling rtw89_fw_h2c_del_pkt_offload(). * rtw89_core_cancel_6ghz_probe_tx() * rtw89_release_pkt_list() It is possible that we try to delete the same one from FW twice. Although it might not be a big problem for now, it will depend on the runtime chip firmware. So, we add a check to avoid it. In case things becomes complex due to racing problem, we don't choose to do list_del(info->list) and kfree(info) in both sides. Besides, rtw89_fw_h2c_del_pkt_offload() will needs to wait for completion after the follow-up commit. However, rtw89_core_cancel_6ghz_probe_tx() was called in interrupt context. So, we move the stuffs of calling rtw89_fw_h2c_del_pkt_offload() from rtw89_core_cancel_6ghz_probe_tx() into a work. Then, we also need a check there before we call it. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/091966e5709cd7caecf9b81f7fd6388ae2b70a7e.camel@realtek.com
2023-05-05wifi: rtw89: release bit in rtw89_fw_h2c_del_pkt_offload()Zong-Zhe Yang
We have a pair of FW functions, rtw89_fw_h2c_add_pkt_offload() and rtw89_fw_h2c_del_pkt_offload(). The rtw89_fw_h2c_add_pkt_offload() acquires the bit itself, but the bit needs to be released by the caller of rtw89_fw_h2c_del_pkt_offload(). This looks asymmetrical and is not friendly to callers. Second, if callers always releases the bits, it might make driver unaligned to bitmap status of FW after some failures of calling rtw89_fw_h2c_del_pkt_offload(). So, this commit move bit release into rtw89_fw_h2c_del_pkt_offload(). In general, driver will call rtw89_fw_h2c_add_pkt_offload() and rtw89_fw_h2c_del_pkt_offload(), and then, SW bitmap can align with FW one. There is one exception when notify_fw is false. It happens when driver detects FW problems and is going to reset FW. Only in this case, driver needs to release bits outside rtw89_fw_h2c_del_pkt_offload(). Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/8cf5d45c5b04e7b680d4eb9dda62056cdce14cec.camel@realtek.com
2023-05-05wifi: rtw89: add EVM for antenna diversityEric Huang
Take EVM into consideration when doing antenna diversity, and the priority is higher than RSSI. Since EVM is more relevant to performance than RSSI, especially in OTA environment. Signed-off-by: Eric Huang <echuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230418012820.5139-8-pkshih@realtek.com
2023-05-05wifi: rtw89: add RSSI based antenna diversityEric Huang
RSSI statistics are grouped by CCK, OFDM or non-legacy rate. These statistics will be collected in training state for both (main/aux) antenna. There is a time period (ANTDIV_DELAY) for rate adaptive settle down before start collect statistics when switch antenna. Antenna diversity checks packet count from training state for each group and use the most one as the final RSSI for comparison, and then choose the better one as target antenna. Signed-off-by: Eric Huang <echuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230418012820.5139-7-pkshih@realtek.com
2023-05-05wifi: rtw89: initialize antenna for antenna diversityEric Huang
Initialize basic antenna switch settings according to hardware module design, and set to default antenna A. The set antenna function will be called dynamically to switch antenna according to EVM and RSSI. Signed-off-by: Eric Huang <echuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230418012820.5139-6-pkshih@realtek.com
2023-05-05wifi: rtw89: add EVM and SNR statistics to debugfsPing-Ke Shih
To help debug performance problem, add EVM and SNR statistics to debugfs that shows EVM: [(26.75, 26.75) (25.75, 25.75)] SNR: 40 Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230418012820.5139-5-pkshih@realtek.com
2023-05-05wifi: rtw89: add RSSI statistics for the case of antenna diversity to debugfsPing-Ke Shih
RSSI strength is only from PHY path A, but there are two antenna for the module which supports antenna diversity. So, set RSSI value to index 1 of RSSI array if current antenna is on antenna B. Then, debugfs can show two RSSI values with a asterisk mark on selected antenna. RSSI: -23 dBm (raw=174, prev=173) [-26, -23*] Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230418012820.5139-4-pkshih@realtek.com
2023-05-05wifi: rtw89: set capability of TX antenna diversityPing-Ke Shih
TX antenna diversity is a mechanism to select a proper antenna from two antenna for single one hardware PHY chip. It chooses antenna with better EVM or RSSI, and use GPIO to control SPDT to switch selected antenna. RFE type from efuse is used to define if a module can support TX antenna diversity when (type % 3) is 2. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230418012820.5139-3-pkshih@realtek.com
2023-05-05wifi: rtw89: use struct rtw89_phy_sts_ie0 instead of macro to access PHY IE0 ↵Ping-Ke Shih
status To be more clear to know where it gets information from PHY IE0 data, change to use struct and standard le32_get_bits() to access. This doesn't change logic at all. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230418012820.5139-2-pkshih@realtek.com
2023-05-05wifi: rtw88: fix incorrect error codes in rtw_debugfs_set_*Zhang Shurong
If there is a failure during copy_from_user or user-provided data buffer is invalid, rtw_debugfs_set_* should return negative error code instead of a positive value count. Fix this bug by returning correct error code. Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/tencent_53140CC2A3468101955F02EB66AA96780B05@qq.com
2023-05-05wifi: rtw88: fix incorrect error codes in rtw_debugfs_copy_from_userZhang Shurong
If there is a failure during copy_from_user or user-provided data buffer is invalid, rtw_debugfs_copy_from_user should return negative error code instead of a positive value count. Fix this bug by returning correct error code. Moreover, the check of buffer against null is removed since it will be handled by copy_from_user. Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/tencent_D2EB102CC7435C0110154E62ECA6A7D67505@qq.com
2023-05-05wifi: rtl8xxxu: rtl8xxxu_rx_complete(): remove unnecessary returnMartin Kaiser
Remove a return statement at the end of a void function. This fixes a checkpatch warning. WARNING: void function return statements are not generally useful 6206: FILE: ./drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c:6206: + return; +} Signed-off-by: Martin Kaiser <martin@kaiser.cx> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230427185936.923777-1-martin@kaiser.cx
2023-05-05wifi: rtl8xxxu: Support USB RX aggregation for the newer chipsBitterblue Smith
The driver can receive several frames in the same USB transfer. Add the code to handle this in rtl8xxxu_parse_rxdesc24(), even though currently all the relevant chips send only one frame per USB transfer (RTL8723BU, RTL8192EU, RTL8188FU, RTL8710BU). This was tested with RTL8188FU, RTL8192EU, RTL8710BU, and RTL8192FU. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/16d2d1ff-6438-10c9-347f-6e14dd358ccf@gmail.com
2023-05-05wifi: rtl8xxxu: Set maximum number of supported stationsMartin Kaistra
Set maximum number of associated stations supported in AP mode. For 8188f, the maximum number of supported macids is 16, reserve one for broadcast/multicast frames. Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230428150833.218605-19-martin.kaistra@linutronix.de
2023-05-05wifi: rtl8xxxu: Declare AP mode support for 8188fMartin Kaistra
Everything is in place now for AP mode, we can tell the system that we support it. Put the feature behind a flag in priv->fops, because it is not (yet) implemented for all chips. Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230428150833.218605-18-martin.kaistra@linutronix.de
2023-05-05wifi: rtl8xxxu: Remove usage of tx_info->control.rates[0].flagsMartin Kaistra
As this driver uses HAS_RATE_CONTROL, rate_flags will not be provided by mac80211. Stop using tx_info->control.rates[0].flags and ieee80211_get_rts_cts_rate() and use rts_threshold and bss_conf.use_cts_prot instead to determine when to use RTS and CTS. Send RTS with 24M rate like the vendor drivers. Also set this RTS rate for ampdu_enable = true, because we also enable RTS for these frames. Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230428150833.218605-17-martin.kaistra@linutronix.de
2023-05-05wifi: rtl8xxxu: Remove usage of ieee80211_get_tx_rate()Martin Kaistra
As this driver uses HAS_RATE_CONTROL, tx_rates will not be provided by mac80211. For some frames c->control.rates[0].idx is negative, which means ieee80211_get_tx_rate() will print a warning and return NULL. Only management frames have USE_DRIVER_RATE set, so for all others the rate info of txdesc is ignored anyway. Remove call to ieee80211_get_tx_rate() and send management frames with 1M (rate info = 0). Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230428150833.218605-16-martin.kaistra@linutronix.de
2023-05-05wifi: rtl8xxxu: Clean up filter configurationMartin Kaistra
When RCR_CHECK_BSSID_MATCH is set in AP mode, we don't receive any data frames. Rearrange RCR bits to filter flags to match other realtek drivers and remove RCR_CHECK_BSSID_MATCH in AP mode. Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230428150833.218605-15-martin.kaistra@linutronix.de
2023-05-05wifi: rtl8xxxu: Enable hw seq for mgmt/non-QoS data framesMartin Kaistra
Beacon frames are generated by the HW and therefore contain a HW generated seq number. Enable HW sequence number for other frames to match that. mac80211 will tell us via IEEE80211_TX_CTL_ASSIGN_SEQ when that is necessary. Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230428150833.218605-14-martin.kaistra@linutronix.de
2023-05-05wifi: rtl8xxxu: Add parameter macid to update_rate_maskMartin Kaistra
The HW maintains a rate_mask for each connection, referenced by the macid. Add a parameter to update_rate_mask and add the macid to the h2c call in the gen2 implementation. Also extend refresh_rate_mask to get the macid from sta_info. Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230428150833.218605-13-martin.kaistra@linutronix.de
2023-05-05wifi: rtl8xxxu: Put the macid in txdescMartin Kaistra
Add a parameter macid to fill_txdesc(), implement setting it for the gen2 version. This is used to tell the HW who the recipient of the packet is, so that the appropriate data rate can be selected. Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230428150833.218605-12-martin.kaistra@linutronix.de
2023-05-05wifi: rtl8xxxu: Add sta_add() and sta_remove() callbacksMartin Kaistra
In AP mode, sta_add() gets called when a new STA gets associated to us. Call rtl8xxxu_refresh_rate_mask() to set a rate mask for the newly connected STA (referenced by the macid) and then send a media connnect report. Ignore the call to sta_add() in station mode. Reserve one macid for broadcast/multicast packets in init. Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230428150833.218605-11-martin.kaistra@linutronix.de
2023-05-05wifi: rtl8xxxu: Add parameter force to rtl8xxxu_refresh_rate_maskMartin Kaistra
In AP mode, when multiple STAs connect to us, we need to set an initial rate mask for each of them. This initialisation should happen regardless of the rssi_level saved in the priv struct. Add a parameter called force to rtl8xxxu_refresh_rate_mask() which will be used for this initialisation. Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230428150833.218605-10-martin.kaistra@linutronix.de
2023-05-05wifi: rtl8xxxu: Add parameter role to report_connectMartin Kaistra
This allows to tell the HW if a connection is made to a STA or an AP. Add the implementation for the gen2 version. Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230428150833.218605-9-martin.kaistra@linutronix.de
2023-05-05wifi: rtl8xxxu: Actually use macid in rtl8xxxu_gen2_report_connectMartin Kaistra
The report_connect function has had a macid parameter from the beginning, but it has not been used, because in STA mode, the value was always zero. As it can now have different values in AP mode, actually wire it up to the H2C command. Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230428150833.218605-8-martin.kaistra@linutronix.de
2023-05-05wifi: rtl8xxxu: Allow creating interface in AP modeMartin Kaistra
Use the sequence from the vendor driver for setting up the beacon related registers. Also set the MAC address register here, in case the MAC address for the new interface should be different from what was set in rtl8xxxu_init_device(). This happens for example with the hostapd config option "bssid". Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230428150833.218605-7-martin.kaistra@linutronix.de
2023-05-05wifi: rtl8xxxu: Allow setting rts threshold to -1Martin Kaistra
The default setting in hostapd.conf for rts threshold is -1, which means disabled. Allow to set it. Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230428150833.218605-6-martin.kaistra@linutronix.de
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-04 13:44:46 +0000