| Age | Commit message (Collapse) | Author |
|---|
|
[ Upstream commit 0fb15ae3b0a9221be01715dac0335647c79f3362 ]
plfxlc_mac_release() asserts that mac->lock is held. This assertion is
incorrect, because even if it was possible, it would not be the valid
behaviour. The function is used when probe fails or after the device is
disconnected. In both cases mac->lock can not be held as the driver is
not working with the device at the moment. All functions that use mac->lock
unlock it just after it was held. There is also no need to hold mac->lock
for plfxlc_mac_release() itself, as mac data is not affected, except for
mac->flags, which is modified atomically.
This bug leads to the following warning:
================================================================
WARNING: CPU: 0 PID: 127 at drivers/net/wireless/purelifi/plfxlc/mac.c:106 plfxlc_mac_release+0x7d/0xa0
Modules linked in:
CPU: 0 PID: 127 Comm: kworker/0:2 Not tainted 6.1.124-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
Workqueue: usb_hub_wq hub_event
RIP: 0010:plfxlc_mac_release+0x7d/0xa0 drivers/net/wireless/purelifi/plfxlc/mac.c:106
Call Trace:
<TASK>
probe+0x941/0xbd0 drivers/net/wireless/purelifi/plfxlc/usb.c:694
usb_probe_interface+0x5c0/0xaf0 drivers/usb/core/driver.c:396
really_probe+0x2ab/0xcb0 drivers/base/dd.c:639
__driver_probe_device+0x1a2/0x3d0 drivers/base/dd.c:785
driver_probe_device+0x50/0x420 drivers/base/dd.c:815
__device_attach_driver+0x2cf/0x510 drivers/base/dd.c:943
bus_for_each_drv+0x183/0x200 drivers/base/bus.c:429
__device_attach+0x359/0x570 drivers/base/dd.c:1015
bus_probe_device+0xba/0x1e0 drivers/base/bus.c:489
device_add+0xb48/0xfd0 drivers/base/core.c:3696
usb_set_configuration+0x19dd/0x2020 drivers/usb/core/message.c:2165
usb_generic_driver_probe+0x84/0x140 drivers/usb/core/generic.c:238
usb_probe_device+0x130/0x260 drivers/usb/core/driver.c:293
really_probe+0x2ab/0xcb0 drivers/base/dd.c:639
__driver_probe_device+0x1a2/0x3d0 drivers/base/dd.c:785
driver_probe_device+0x50/0x420 drivers/base/dd.c:815
__device_attach_driver+0x2cf/0x510 drivers/base/dd.c:943
bus_for_each_drv+0x183/0x200 drivers/base/bus.c:429
__device_attach+0x359/0x570 drivers/base/dd.c:1015
bus_probe_device+0xba/0x1e0 drivers/base/bus.c:489
device_add+0xb48/0xfd0 drivers/base/core.c:3696
usb_new_device+0xbdd/0x18f0 drivers/usb/core/hub.c:2620
hub_port_connect drivers/usb/core/hub.c:5477 [inline]
hub_port_connect_change drivers/usb/core/hub.c:5617 [inline]
port_event drivers/usb/core/hub.c:5773 [inline]
hub_event+0x2efe/0x5730 drivers/usb/core/hub.c:5855
process_one_work+0x8a9/0x11d0 kernel/workqueue.c:2292
worker_thread+0xa47/0x1200 kernel/workqueue.c:2439
kthread+0x28d/0x320 kernel/kthread.c:376
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295
</TASK>
================================================================
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: 68d57a07bfe5 ("wireless: add plfxlc driver for pureLiFi X, XL, XC devices")
Reported-by: syzbot+7d4f142f6c288de8abfe@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=7d4f142f6c288de8abfe
Signed-off-by: Murad Masimov <m.masimov@mt-integration.ru>
Link: https://patch.msgid.link/20250321185226.71-2-m.masimov@mt-integration.ru
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a17821321a9b42f26e77335cd525fee72dc1cd63 ]
We can't rely on the SCRATCH register being 0 on platform that power
gate the NIC in S3. Even in those platforms, the SCRATCH register is
still returning 0x1010000.
Make sure that we understand that those platforms have powered off the
device.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219597
Fixes: cb347bd29d0d ("wifi: iwlwifi: mvm: fix hibernation")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250420095642.a7e082ee785c.I9418d76f860f54261cfa89e1f7ac10300904ba40@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 15220a257319ffe3bf95796326dfe0aacdbeb1c4 ]
Some BIOSes decide to power gate the WLAN device during S3. Since
iwlwifi doesn't expect this, it gets very noisy reporting that the
device is no longer available. Wifi is still available because iwlwifi
recovers, but it spews scary prints in the log.
Fix that by failing gracefully.
Fixes: e8bb19c1d590 ("wifi: iwlwifi: support fast resume")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219597
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250420095642.d8d58146c829.I569ca15eaaa774d633038a749cc6ec7448419714@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 8e089e7b585d95122c8122d732d1d5ef8f879396 upstream.
The function brcmf_usb_dl_writeimage() calls the function
brcmf_usb_dl_cmd() but dose not check its return value. The
'state.state' and the 'state.bytes' are uninitialized if the
function brcmf_usb_dl_cmd() fails. It is dangerous to use
uninitialized variables in the conditions.
Add error handling for brcmf_usb_dl_cmd() to jump to error
handling path if the brcmf_usb_dl_cmd() fails and the
'state.state' and the 'state.bytes' are uninitialized.
Improve the error message to report more detailed error
information.
Fixes: 71bb244ba2fd ("brcm80211: fmac: add USB support for bcm43235/6/8 chipsets")
Cc: stable@vger.kernel.org # v3.4+
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20250422042203.2259-1-vulab@iscas.ac.cn
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 63fdc4509bcf483e79548de6bc08bf3c8e504bb3 upstream.
Currently, ath12k_dp_mon_srng_process uses ath12k_hal_srng_src_get_next_entry
to fetch the next entry from the destination ring. This is incorrect because
ath12k_hal_srng_src_get_next_entry is intended for source rings, not destination
rings. This leads to invalid entry fetches, causing potential data corruption or
crashes due to accessing incorrect memory locations. This happens because the
source ring and destination ring have different handling mechanisms and using
the wrong function results in incorrect pointer arithmetic and ring management.
To fix this issue, replace the call to ath12k_hal_srng_src_get_next_entry with
ath12k_hal_srng_dst_get_next_entry in ath12k_dp_mon_srng_process. This ensures
that the correct function is used for fetching entries from the destination
ring, preventing invalid memory accesses.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: P Praneesh <quic_ppranees@quicinc.com>
Link: https://patch.msgid.link/20241223060132.3506372-7-quic_ppranees@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Alexander Tsoy <alexander@tsoy.me>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit 535b666118f6ddeae90a480a146c061796d37022 which is
commit 63fdc4509bcf483e79548de6bc08bf3c8e504bb3 upstream as it was
backported incorrectly.
A subsequent commit will re-backport the original patch.
Signed-off-by: Alexander Tsoy <alexander@tsoy.me>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit a0f0dc96de03ffeefc2a177b7f8acde565cb77f4 ]
The skb dequeued from tx_queue is lost when wl1251_ps_elp_wakeup fails
with a -ETIMEDOUT error. Fix that by queueing the skb back to tx_queue.
Fixes: c5483b719363 ("wl12xx: check if elp wakeup failed")
Signed-off-by: Abdun Nihaal <abdun.nihaal@gmail.com>
Reviewed-by: Michael Nemanov <michael.nemanov@ti.com>
Link: https://patch.msgid.link/20250330104532.44935-1-abdun.nihaal@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 27c7e63b3cb1a20bb78ed4a36c561ea4579fd7da ]
The memory pointed to by priv is freed at the end of at76_delete_device
function (using ieee80211_free_hw). But the code then accesses the udev
field of the freed object to put the USB device. This may also lead to a
memory leak of the usb device. Fix this by using udev from interface.
Fixes: 29e20aa6c6af ("at76c50x-usb: fix use after free on failure path in at76_probe()")
Signed-off-by: Abdun Nihaal <abdun.nihaal@gmail.com>
Link: https://patch.msgid.link/20250330103110.44080-1-abdun.nihaal@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 7dcea6fe33ee3d7cbb65baee0dd7adc76d1c9ddc upstream.
The mt7925 chip is only support a single radio, so the maximum
number of simultaneous should be 0.
Fixes: 86c051f2c418 ("wifi: mt76: mt7925: enabling MLO when the firmware supports it")
Cc: stable@vger.kernel.org
Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Tested-by: Caleb Jorden <cjorden@gmail.com>
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Link: https://patch.msgid.link/20250305000851.493671-3-sean.wang@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4bada9b0a29c185d45cc9512509edd6069fbfa79 upstream.
When the p2p device and MLO station are running concurrently, the p2p device
will occupy the wrong link_idx when the MLO secondary link is added.
Fixes: 9e4c3a007f01 ("wifi: mt76: connac: Extend mt76_connac_mcu_uni_add_dev for MLO")
Cc: stable@vger.kernel.org
Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Tested-by: Caleb Jorden <cjorden@gmail.com>
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Link: https://patch.msgid.link/20250305000851.493671-2-sean.wang@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6458d760a0c0afd2fda11e83ed3e1125a252432f upstream.
Due to the increase in the number of power tables for 6Ghz on CLC,
the variable nr_country is no longer sufficient to represent the
total quantity. Therefore, we have switched to calculating the
length of clc buf to obtain the correct power table.
Cc: stable@vger.kernel.org
Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Link: https://patch.msgid.link/20250116062131.3860198-1-mingyen.hsieh@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8ae45b1f699bbc27ea8647093f794f671e77410b upstream.
Align the format of "struct mt7925_wow_pattern_tlv" with
firmware to ensure proper functionality.
Cc: stable@vger.kernel.org
Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Link: https://patch.msgid.link/20250116055925.3856856-1-mingyen.hsieh@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4bc1da524b502999da28d287de4286c986a1af57 upstream.
Add check for the return value of devm_kstrdup() in
mt76_get_of_data_from_mtd() to catch potential exception.
Fixes: e7a6a044f9b9 ("mt76: testmode: move mtd part to mt76_dev")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Link: https://patch.msgid.link/20250219033645.2594753-1-haoxiang_li2024@163.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 06cccc2ebbe6c8a20f714f3a0ff3ff489d3004bb ]
The TP-Link TL-WDN6200 "Driverless" version cards use a MT7612U chipset.
Add the USB ID to mt76x2u driver.
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
Link: https://patch.msgid.link/20250317102235.1421726-1-uwu@icenowy.me
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9a0dddfb30f120db3851627935851d262e4e7acb ]
In certain cases, hardware might provide packets with a
length greater than the maximum native Wi-Fi header length.
This can lead to accessing and modifying fields in the header
within the ath12k_dp_rx_h_undecap_nwifi function for
DP_RX_DECAP_TYPE_NATIVE_WIFI decap type and
potentially resulting in invalid data access and memory corruption.
Add a sanity check before processing the SKB to prevent invalid
data access in the undecap native Wi-Fi function for the
DP_RX_DECAP_TYPE_NATIVE_WIFI decap type.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Signed-off-by: Manish Dharanenthiran <quic_mdharane@quicinc.com>
Signed-off-by: Tamizh Chelvam Raja <tamizh.raja@oss.qualcomm.com>
Link: https://patch.msgid.link/20250211090302.4105141-1-tamizh.raja@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 63fdc4509bcf483e79548de6bc08bf3c8e504bb3 ]
Currently, ath12k_dp_mon_srng_process uses ath12k_hal_srng_src_get_next_entry
to fetch the next entry from the destination ring. This is incorrect because
ath12k_hal_srng_src_get_next_entry is intended for source rings, not destination
rings. This leads to invalid entry fetches, causing potential data corruption or
crashes due to accessing incorrect memory locations. This happens because the
source ring and destination ring have different handling mechanisms and using
the wrong function results in incorrect pointer arithmetic and ring management.
To fix this issue, replace the call to ath12k_hal_srng_src_get_next_entry with
ath12k_hal_srng_dst_get_next_entry in ath12k_dp_mon_srng_process. This ensures
that the correct function is used for fetching entries from the destination
ring, preventing invalid memory accesses.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: P Praneesh <quic_ppranees@quicinc.com>
Link: https://patch.msgid.link/20241223060132.3506372-7-quic_ppranees@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1b24394ed5c8a8d8f7b9e3aa9044c31495d46f2e ]
Kmemleak reported this error:
unreferenced object 0xffff1c165cec3060 (size 32):
comm "insmod", pid 560, jiffies 4296964570 (age 235.596s)
backtrace:
[<000000005434db68>] __kmem_cache_alloc_node+0x1f4/0x2c0
[<000000001203b155>] kmalloc_trace+0x40/0x88
[<0000000028adc9c8>] _request_firmware+0xb8/0x608
[<00000000cad1aef7>] firmware_request_nowarn+0x50/0x80
[<000000005011a682>] local_pci_probe+0x48/0xd0
[<00000000077cd295>] pci_device_probe+0xb4/0x200
[<0000000087184c94>] really_probe+0x150/0x2c0
The firmware memory was allocated in ath12k_pci_probe(), but not
freed in ath12k_pci_remove() in case ATH12K_FLAG_QMI_FAIL bit is
set. So call ath12k_fw_unmap() to free the memory.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.2.0-02280-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1
Signed-off-by: Miaoqing Pan <quic_miaoqing@quicinc.com>
Reviewed-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com>
Link: https://patch.msgid.link/20250123080226.1116479-1-quic_miaoqing@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit efb24b1f0d29537714dd3cc46fb335ac27855251 ]
The firmware memory was allocated in ath11k_pci_probe() or
ath11k_ahb_probe(), but not freed in ath11k_xxx_remove() in case
ATH11K_FLAG_QMI_FAIL bit is set. So call ath11k_fw_destroy() to
free the memory.
Found while fixing the same problem in ath12k:
https://lore.kernel.org/linux-wireless/20240314012746.2729101-1-quic_miaoqing@quicinc.com
Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-04546-QCAHSPSWPL_V1_V2_SILICONZ_IOE-1
Signed-off-by: Miaoqing Pan <quic_miaoqing@quicinc.com>
Reviewed-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com>
Link: https://patch.msgid.link/20250123084948.1124357-1-quic_miaoqing@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1bcd20981834928ccc5d981aacb806bb523d8b29 ]
Currently, the driver allocates cacheable DMA buffers for rings like
HAL_REO_DST and HAL_WBM2SW_RELEASE. The buffers for HAL_WBM2SW_RELEASE
are large (1024 KiB), exceeding the SWIOTLB slot size of 256 KiB. This
leads to "swiotlb buffer is full" error messages on systems without an
IOMMU that use SWIOTLB, causing driver initialization failures. The driver
calls dma_map_single() with these large buffers obtained from kzalloc(),
resulting in ring initialization errors on systems without an IOMMU that
use SWIOTLB.
To address these issues, replace the flawed buffer allocation mechanism
with the appropriate DMA API. Specifically, use dma_alloc_noncoherent()
for cacheable DMA buffers, ensuring proper freeing of buffers with
dma_free_noncoherent().
Error log:
[ 10.194343] ath11k_pci 0000:04:00.0: swiotlb buffer is full (sz:1048583 bytes), total 32768 (slots), used 2529 (slots)
[ 10.194406] ath11k_pci 0000:04:00.0: failed to set up tcl_comp ring (0) :-12
[ 10.194781] ath11k_pci 0000:04:00.0: failed to init DP: -12
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3
Reported-by: Tim Harvey <tharvey@gateworks.com>
Closes: https://lore.kernel.org/all/20241210041133.GA17116@lst.de/
Signed-off-by: P Praneesh <quic_ppranees@quicinc.com>
Tested-by: Tim Harvey <tharvey@gateworks.com>
Link: https://patch.msgid.link/20250119164219.647059-2-quic_ppranees@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit adc3fd2a2277b7cc0b61692463771bf9bd298036 upstream.
Address a kernel panic caused by a null pointer dereference in the
`mt792x_rx_get_wcid` function. The issue arises because the `deflink` structure
is not properly initialized with the `sta` context. This patch ensures that the
`deflink` structure is correctly linked to the `sta` context, preventing the
null pointer dereference.
BUG: kernel NULL pointer dereference, address: 0000000000000400
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 0 UID: 0 PID: 470 Comm: mt76-usb-rx phy Not tainted 6.12.13-gentoo-dist #1
Hardware name: /AMD HUDSON-M1, BIOS 4.6.4 11/15/2011
RIP: 0010:mt792x_rx_get_wcid+0x48/0x140 [mt792x_lib]
RSP: 0018:ffffa147c055fd98 EFLAGS: 00010202
RAX: 0000000000000000 RBX: ffff8e9ecb652000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff8e9ecb652000
RBP: 0000000000000685 R08: ffff8e9ec6570000 R09: 0000000000000000
R10: ffff8e9ecd2ca000 R11: ffff8e9f22a217c0 R12: 0000000038010119
R13: 0000000080843801 R14: ffff8e9ec6570000 R15: ffff8e9ecb652000
FS: 0000000000000000(0000) GS:ffff8e9f22a00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000400 CR3: 000000000d2ea000 CR4: 00000000000006f0
Call Trace:
<TASK>
? __die_body.cold+0x19/0x27
? page_fault_oops+0x15a/0x2f0
? search_module_extables+0x19/0x60
? search_bpf_extables+0x5f/0x80
? exc_page_fault+0x7e/0x180
? asm_exc_page_fault+0x26/0x30
? mt792x_rx_get_wcid+0x48/0x140 [mt792x_lib]
mt7921_queue_rx_skb+0x1c6/0xaa0 [mt7921_common]
mt76u_alloc_queues+0x784/0x810 [mt76_usb]
? __pfx___mt76_worker_fn+0x10/0x10 [mt76]
__mt76_worker_fn+0x4f/0x80 [mt76]
kthread+0xd2/0x100
? __pfx_kthread+0x10/0x10
ret_from_fork+0x34/0x50
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
---[ end trace 0000000000000000 ]---
Reported-by: Nick Morrow <usbwifi2024@gmail.com>
Closes: https://github.com/morrownr/USB-WiFi/issues/577
Cc: stable@vger.kernel.org
Fixes: 90c10286b176 ("wifi: mt76: mt7925: Update mt792x_rx_get_wcid for per-link STA")
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Tested-by: Salah Coronya <salah.coronya@gmail.com>
Link: https://patch.msgid.link/20250218033343.1999648-1-mingyen.hsieh@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b4ea6fdfc08375aae59c7e7059653b9877171fe4 upstream.
The code for handling ACPI configuration in CLC was copied from the mt7921
driver but is not utilized in the mt7925 implementation. So removes the
unused functionality to clean up the codebase.
Cc: stable@vger.kernel.org
Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Link: https://patch.msgid.link/20250304113649.867387-4-mingyen.hsieh@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 8c3170628a9ce24a59647bd24f897e666af919b8 ]
After commit 92cadedd9d5f ("brcmfmac: Avoid keeping power to SDIO card
unless WOWL is used"), the wifi adapter by default is turned off on
suspend and then re-probed on resume.
This conflicts with some embedded boards that require to remain powered.
They will fail on resume with:
brcmfmac: brcmf_sdio_bus_rxctl: resumed on timeout
ieee80211 phy1: brcmf_bus_started: failed: -110
ieee80211 phy1: brcmf_attach: dongle is not responding: err=-110
brcmfmac: brcmf_sdio_firmware_callback: brcmf_attach failed
This commit checks for the Device Tree property 'cap-power-off-cards'.
If this property is not set, it means that we do not have the capability
to power off and should therefore remain powered.
Signed-off-by: Matthias Proske <email@matthias-proske.de>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20250212185941.146958-2-email@matthias-proske.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a03e2082e678ea10d0d8bdf3ed933eb05a8ddbb0 ]
The firmware uses the newer version of the API in recent devices. For
older devices, we translate the rate to the new format.
Don't parse the rate with old parsing macros.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250209143303.13d70cdcbb4e.Ic92193bce4013b70a823cfef250ee79c16cf7c17@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7774e3920029398ad49dc848b23840593f14d515 ]
The firmware dumps can be pretty big, and since we use single
pages for each SG table entry, even the table itself may end
up being an order-5 allocation. Build chained tables so that
we need not allocate a higher-order table here.
This could be improved and cleaned up, e.g. by using the SG
pool code or simply kvmalloc(), but all of that would require
also updating the devcoredump first since that frees it all,
so we need to be more careful. SG pool might also run against
the CONFIG_ARCH_NO_SG_CHAIN limitation, which is irrelevant
here.
Also use _devcd_free_sgtable() for the error paths now, much
simpler especially since it's in two places now.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250209143303.697c7a465ac9.Iea982df46b5c075bfb77ade36f187d99a70c63db@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b8c8a03e9b7bfc06f366b75daf3d0812400e7123 ]
When MSI-X is not enabled, we mask all the interrupts in the interrupt
handler and re-enable them when the interrupt thread runs. If
STATUS_INT_ENABLED is not set, we won't re-enable in the thread.
In order to get the ALIVE interrupt, we allow the ALIVE interrupt
itself, and RX as well in order to receive the ALIVE notification (which
is received as an RX from the firmware.
The problem is that STATUS_INT_ENABLED is clear until the op_mode calls
trans_fw_alive which means that until trans_fw_alive is called, any
notification from the firmware will not be received.
This became a problem when we inserted the pnvm_load exactly between the
ALIVE and trans_fw_alive.
Fix that by calling trans_fw_alive before loading the PNVM. This will
allow to get the notification from the firmware about PNVM load being
complete and continue the flow normally.
This didn't happen on MSI-X because we don't disable the interrupts in
the ISR when MSI-X is available.
The error in the log looks like this:
iwlwifi 0000:00:03.0: Timeout waiting for PNVM load!
iwlwifi 0000:00:03.0: Failed to start RT ucode: -110
iwlwifi 0000:00:03.0: WRT: Collecting data: ini trigger 13 fired (delay=0ms).
Fixes: 70d3ca86b025 ("iwlwifi: mvm: ring the doorbell and wait for PNVM load completion")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250306122425.0f2cf207aae1.I025d8f724b44f52eadf6c19069352eb9275613a8@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit bbb18f7e23a3f5f56d5c8b4ee0f78f00edb3b1b2 upstream.
The allocation of the scatter gather data structure should be done
based on the number of memory chunks that need to be mapped, and it
is not dependent on the overall payload length. Fix it.
In addition, as the skb_to_sgvec() function returns an 'int' do not
assign it to an 'unsigned int' as otherwise the error check would be
useless.
Fixes: 7f5e3038f029 ("wifi: iwlwifi: map entire SKB when sending AMSDUs")
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250306122425.8c0e23a3d583.I3cb4d6768c9d28ce3da6cd0a6c65466176cfc1ee@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 3640dbc1f75ce15d128ea4af44226960d894f3fd ]
The TSO preparation assumed that the skb head contained the headers
while the rest of the data was in the fragments. Since this is not
always true, e.g., it is possible that the data was linearised, modify
the TSO preparation to start the data processing after the network
headers.
Fixes: 7f5e3038f029 ("wifi: iwlwifi: map entire SKB when sending AMSDUs")
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250209143303.75769a4769bf.Iaf79e8538093cdf8c446c292cc96164ad6498f61@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3b08e608d50c44ca1135beed179f266aa0461da7 ]
When failing to prepare the data needed for A-MSDU transmission, the memory
allocated for the TSO management was not freed. Fix it.
Fixes: 7f5e3038f029 ("wifi: iwlwifi: map entire SKB when sending AMSDUs")
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250209143303.bc27fad9b3d5.Ibf43dd18fb652b1a59061204e081f11c9fa34a3f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e0dc2c1bef722cbf16ae557690861e5f91208129 ]
There's no guarantee here that the file is always with a
NUL-termination, so reading the string may read beyond the
end of the TLV. If that's the last TLV in the file, it can
perhaps even read beyond the end of the file buffer.
Fix that by limiting the print format to the size of the
buffer we have.
Fixes: aee1b6385e29 ("iwlwifi: support fseq tlv and print fseq version")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250209143303.cb5f9d0c2f5d.Idec695d53c6c2234aade306f7647b576c7e3d928@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d73d2c6e3313f0ba60711ab4f4b9044eddca9ca5 ]
This fixes:
bad state = 0
WARNING: CPU: 10 PID: 702 at drivers/net/wireless/inel/iwlwifi/iwl-trans.c:178 iwl_trans_send_cmd+0xba/0xe0 [iwlwifi]
Call Trace:
<TASK>
? __warn+0xca/0x1c0
? iwl_trans_send_cmd+0xba/0xe0 [iwlwifi 64fa9ad799a0e0d2ba53d4af93a53ad9a531f8d4]
iwl_fw_dbg_clear_monitor_buf+0xd7/0x110 [iwlwifi 64fa9ad799a0e0d2ba53d4af93a53ad9a531f8d4]
_iwl_dbgfs_fw_dbg_clear_write+0xe2/0x120 [iwlmvm 0e8adb18cea92d2c341766bcc10b18699290068a]
Ask whether the firmware is alive before sending a command.
Fixes: 268712dc3b34 ("wifi: iwlwifi: mvm: add a debugfs hook to clear the monitor data")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250209143303.8e1597b62c70.I12ea71dd9b805b095c9fc12a10c9f34a4e801b61@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f9751163bffd3fe60794929829f810968c6de73d ]
If the firmware fails to start the session protection, then we
do call iwl_mvm_roc_finished() here, but that won't do anything
at all because IWL_MVM_STATUS_ROC_P2P_RUNNING was never set.
Set IWL_MVM_STATUS_ROC_P2P_RUNNING in the failure/stop path.
If it started successfully before, it's already set, so that
doesn't matter, and if it didn't start it needs to be set to
clean up.
Not doing so will lead to a WARN_ON() later on a fresh remain-
on-channel, since the link is already active when activated as
it was never deactivated.
Fixes: 35c1bbd93c4e ("wifi: iwlwifi: mvm: remove IWL_MVM_STATUS_NEED_FLUSH_P2P")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250209143303.0fe36c291068.I67f5dac742170dd937f11e4d4f937f45f71b7cb4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 9c1df813e08832c3836c254bc8a2f83ff22dbc06 upstream.
The PCIE wake bit is to control PCIE wake signal to host. When PCIE is
going down, clear this bit to prevent waking up host unexpectedly.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241111063835.15454-1-pkshih@realtek.com
Signed-off-by: Zenm Chen <zenmchen@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 64a1ba4072b34af1b76bf15fca5c2075b8cc4d64 upstream.
In the US country code, to avoid including 6 GHz rules in the 5 GHz rules
list, the number of 5 GHz rules is set to a default constant value of 4
(REG_US_5G_NUM_REG_RULES). However, if there are more than 4 valid 5 GHz
rules, the current logic will bypass the legitimate 6 GHz rules.
For example, if there are 5 valid 5 GHz rules and 1 valid 6 GHz rule, the
current logic will only consider 4 of the 5 GHz rules, treating the last
valid rule as a 6 GHz rule. Consequently, the actual 6 GHz rule is never
processed, leading to the eventual disabling of 6 GHz channels.
To fix this issue, instead of hardcoding the value to 4, use a helper
function to determine the number of 6 GHz rules present in the 5 GHz rules
list and ignore only those rules.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Cc: stable@vger.kernel.org
Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices")
Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com>
Link: https://patch.msgid.link/20250123-fix_6ghz_rules_handling-v1-1-d734bfa58ff4@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a806a8160a0fcaff368bb510c8a52eff37faf727 upstream.
Fix 3 typos in 8703b driver. 2 typos in calibration routines are not
fatal and do not seem to have any impact, just fix them to match vendor
driver.
However the last one in rtw8703b_set_channel_bb() clears too many bits
in REG_OFDM0_TX_PSD_NOISE, causing TX and RX issues (neither rate goes
above MCS0-MCS1). Vendor driver clears only 2 most significant bits.
With the last typo fixed, the driver is able to reach MCS7 on Pinebook
Cc: stable@vger.kernel.org
Fixes: 9bb762b3a957 ("wifi: rtw88: Add definitions for 8703b chip")
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Tested-by: Fiona Klute <fiona.klute@gmx.de>
Tested-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250103075107.1337533-1-anarsoul@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 57af267d2b8f5d88485c6372761386d79c5e6a1a upstream.
Due to a limitation in available memory, the MT7916 firmware can only
handle either 5 GHz or 6 GHz at a time. It does not support runtime
switching without a full restart.
On older firmware, this accidentally worked to some degree due to missing
checks, but couldn't be supported properly, because it left the 6 GHz
channels uncalibrated.
Newer firmware refuses to start on either band if the passed EEPROM
data indicates support for both.
Deal with this limitation by using a module parameter to specify the
preferred band in case both are supported.
Fixes: b4d093e321bd ("mt76: mt7915: add 6 GHz support")
Cc: stable@vger.kernel.org
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Link: https://patch.msgid.link/20241010083816.51880-1-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit fb2fcfbe5eef9ae26b0425978435ae1308951e51 upstream.
This is the equivalent of commit 28818b4d871b ("wifi: rtw88: usb: Fix
disconnection after beacon loss") for SDIO chips.
Tested on Pinephone (RTL8723CS), random disconnections became rare,
instead of a frequent nuisance.
Cc: stable@vger.kernel.org
Signed-off-by: Fiona Klute <fiona.klute@gmx.de>
Tested-by: Vasily Khoruzhick <anarsoul@gmail.com> # Tested on Pinebook
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250106135434.35936-1-fiona.klute@gmx.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 47d9a8ba1d7f31c674b6936b3c34ee934aa9b420 upstream.
Add VID/PID 35bc/0107 for recently released TP-Link TXE50UH USB WiFi adapter.
Tested-by: Shang Chieh Tseng <shangchieh.tseng@tsengsy.com>
Signed-off-by: Nick Morrow <usbwifi2024@gmail.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/e797f105-9ca8-41e9-96de-7d25dec09943@gmail.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 68abd0c4ebf24cd499841a488b97a6873d5efabb upstream.
On removal of the device or unloading of the kernel module a potential NULL
pointer dereference occurs.
The following sequence deletes the interface:
brcmf_detach()
brcmf_remove_interface()
brcmf_del_if()
Inside the brcmf_del_if() function the drvr->if2bss[ifidx] is updated to
BRCMF_BSSIDX_INVALID (-1) if the bsscfgidx matches.
After brcmf_remove_interface() call the brcmf_proto_detach() function is
called providing the following sequence:
brcmf_detach()
brcmf_proto_detach()
brcmf_proto_msgbuf_detach()
brcmf_flowring_detach()
brcmf_msgbuf_delete_flowring()
brcmf_msgbuf_remove_flowring()
brcmf_flowring_delete()
brcmf_get_ifp()
brcmf_txfinalize()
Since brcmf_get_ip() can and actually will return NULL in this case the
call to brcmf_txfinalize() will result in a NULL pointer dereference inside
brcmf_txfinalize() when trying to update ifp->ndev->stats.tx_errors.
This will only happen if a flowring still has an skb.
Although the NULL pointer dereference has only been seen when trying to
update the tx statistic, all other uses of the ifp pointer have been
guarded as well with an early return if ifp is NULL.
Cc: stable@vger.kernel.org
Signed-off-by: Marcel Hamer <marcel.hamer@windriver.com>
Link: https://lore.kernel.org/all/b519e746-ddfd-421f-d897-7620d229e4b2@gmail.com/
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20250116132240.731039-1-marcel.hamer@windriver.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 66ef0289ac99e155d206ddaa0fdfad09ae3cd007 upstream.
RTL8821AE is stuck transmitting at the lowest rate allowed by the rate
mask. This is because the firmware doesn't know the device is connected
to a network.
Fix the macros SET_H2CCMD_MSRRPT_PARM_OPMODE and
SET_H2CCMD_MSRRPT_PARM_MACID_IND to work on the first byte of __cmd,
not the second. Now the firmware is correctly notified when the device
is connected to a network and it activates the rate control.
Before (MCS3):
[ 5] 0.00-1.00 sec 12.5 MBytes 105 Mbits/sec 0 339 KBytes
[ 5] 1.00-2.00 sec 10.6 MBytes 89.1 Mbits/sec 0 339 KBytes
[ 5] 2.00-3.00 sec 10.6 MBytes 89.1 Mbits/sec 0 386 KBytes
[ 5] 3.00-4.00 sec 10.6 MBytes 89.1 Mbits/sec 0 386 KBytes
[ 5] 4.00-5.00 sec 10.2 MBytes 86.0 Mbits/sec 0 427 KBytes
After (MCS9):
[ 5] 0.00-1.00 sec 33.9 MBytes 284 Mbits/sec 0 771 KBytes
[ 5] 1.00-2.00 sec 31.6 MBytes 265 Mbits/sec 0 865 KBytes
[ 5] 2.00-3.00 sec 29.9 MBytes 251 Mbits/sec 0 963 KBytes
[ 5] 3.00-4.00 sec 28.2 MBytes 237 Mbits/sec 0 963 KBytes
[ 5] 4.00-5.00 sec 26.8 MBytes 224 Mbits/sec 0 963 KBytes
Fixes: 39f40710d0b5 ("rtlwifi: rtl88821ae: Remove usage of private bit manipulation macros")
Cc: stable@vger.kernel.org
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/754785b3-8a78-4554-b80d-de5f603b410b@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 80e96206a3ef348fbd658d98f2f43149c36df8bc ]
A caller of iwl_acpi_get_dsm_object must free the returned object.
iwl_acpi_get_dsm_integer returns immediately without freeing
it if the expected size is more than 8 bytes. Fix that.
Note that with the current code this will never happen, since the caller
of iwl_acpi_get_dsm_integer already checks that the expected size if
either 1 or 4 bytes, so it can't exceed 8 bytes.
While at it, print the DSM value instead of the return value, as this
was the intention in the first place.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241228223206.bf61eaab99f8.Ibdc5df02f885208c222456d42c889c43b7e3b2f7@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9b45ba3976945e8d53f2dd40541a66c690f12286 ]
Add support for new device-ids 0x2730 and 0x272F.
Signed-off-by: Somashekhar(Som) <somashekhar.puttagangaiah@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20241226174257.6a0db60436e7.I50a66544dde6c88acd9abe4b31badab96ef04cfc@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 082d9e263af8de68f0c34f67b251818205160f6e ]
Somewhen between 6.10 and 6.11 the driver started to crash on my
MacBookPro14,3. The property doesn't exist and 'tmp' remains
uninitialized, so we pass a random pointer to devm_kstrdup().
The crash I am getting looks like this:
BUG: unable to handle page fault for address: 00007f033c669379
PF: supervisor read access in kernel mode
PF: error_code(0x0001) - permissions violation
PGD 8000000101341067 P4D 8000000101341067 PUD 101340067 PMD 1013bb067 PTE 800000010aee9025
Oops: Oops: 0001 [#1] SMP PTI
CPU: 4 UID: 0 PID: 827 Comm: (udev-worker) Not tainted 6.11.8-gentoo #1
Hardware name: Apple Inc. MacBookPro14,3/Mac-551B86E5744E2388, BIOS 529.140.2.0.0 06/23/2024
RIP: 0010:strlen+0x4/0x30
Code: f7 75 ec 31 c0 c3 cc cc cc cc 48 89 f8 c3 cc cc cc cc 0f 1f 40 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa <80> 3f 00 74 14 48 89 f8 48 83 c0 01 80 38 00 75 f7 48 29 f8 c3 cc
RSP: 0018:ffffb4aac0683ad8 EFLAGS: 00010202
RAX: 00000000ffffffea RBX: 00007f033c669379 RCX: 0000000000000001
RDX: 0000000000000cc0 RSI: 00007f033c669379 RDI: 00007f033c669379
RBP: 00000000ffffffea R08: 0000000000000000 R09: 00000000c0ba916a
R10: ffffffffffffffff R11: ffffffffb61ea260 R12: ffff91f7815b50c8
R13: 0000000000000cc0 R14: ffff91fafefffe30 R15: ffffb4aac0683b30
FS: 00007f033ccbe8c0(0000) GS:ffff91faeed00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f033c669379 CR3: 0000000107b1e004 CR4: 00000000003706f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
? __die+0x23/0x70
? page_fault_oops+0x149/0x4c0
? raw_spin_rq_lock_nested+0xe/0x20
? sched_balance_newidle+0x22b/0x3c0
? update_load_avg+0x78/0x770
? exc_page_fault+0x6f/0x150
? asm_exc_page_fault+0x26/0x30
? __pfx_pci_conf1_write+0x10/0x10
? strlen+0x4/0x30
devm_kstrdup+0x25/0x70
brcmf_of_probe+0x273/0x350 [brcmfmac]
Signed-off-by: Stefan Dösinger <stefan@codeweavers.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20250106170958.3595-1-stefan@codeweavers.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0daa521a1c8c29ffbefe6530f0d276e74e2749d0 ]
The layout struct of efuse should not do address alignment by compiler.
Otherwise it leads unexpected layout and size for certain arch suc as arm.
In x86-64, the results are identical before and after this patch.
Also adjust bit-field to prevent over adjacent byte to avoid warning:
rtw88/rtw8822b.h:66:1: note: offset of packed bit-field `res2` has changed in GCC 4.4
66 | } __packed;
| ^
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202412120131.qk0x6OhE-lkp@intel.com/
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241212054203.135046-1-pkshih@realtek.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3f4a0948c3524ae50f166dbc6572a3296b014e62 ]
In 'wlc_phy_iqcal_gainparams_nphy()', add gain range check to WARN()
instead of possible out-of-bounds 'tbl_iqcal_gainparams_nphy' access.
Compile tested only.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241210070441.836362-1-dmantipov@yandex.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7b98caea39676561f22db58752551161bb36462b ]
In the original flow, the crystal_cap might be calculated as a negative
value and set as an overflow value. Therefore, we added a check to limit
the calculated crystal_cap value. Additionally, we shrank the crystal_cap
adjustment according to specific CFO.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241128055433.11851-7-pkshih@realtek.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit da8352da1e4f476fdbf549a4efce4f3c618fde3b ]
The non-AP interfaces would not use conf->vht_ldpc so they never set
STA_CAP_VHT_LDPC even if peer-station support LDPC.
Check conf->vht_ldpc only for AP interface.
Without this patch, station only uses BCC to transmit packet in VHT mode.
Fixes: dda423dd65c3 ("wifi: mt76: mt7996: remove mt7996_mcu_beacon_check_caps()")
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Link: https://patch.msgid.link/20250114101026.3587702-7-shayne.chen@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 14749fe2ed360c92c1a2a76dac0b77f759234981 ]
For mt7992 chipsets, the definition of TXD.DW6.BIT10~15 has different
interpretations on different frame types. Driver only needs to fill
MSDU_CNT for non-management frames.
Fixes: 408566db8cad ("wifi: mt76: connac: add new definition of tx descriptor")
Co-developed-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Benjamin Lin <benjamin-jw.lin@mediatek.com>
Link: https://patch.msgid.link/20250114101026.3587702-6-shayne.chen@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5c2a25a1ab76a2976dddc5ffd58498866f3ef7c2 ]
Fix wrong calculation of the channel times due to incorrect
interpretation from the FW event.
Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices")
Signed-off-by: Benjamin Lin <benjamin-jw.lin@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Link: https://patch.msgid.link/20250114101026.3587702-4-shayne.chen@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7e3aef59a403ade5dd4ea02edc2d7138a66d74b6 ]
Set HE SU PPDU And HE MU PPDU With 4x HE-LTF And 0.8 us GI within HE PHY
Capabilities element as 1 since hardware can support.
Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices")
Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Link: https://patch.msgid.link/20250114101026.3587702-3-shayne.chen@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2ffbdfc1bd78ba944c5754791c84f32232b513c6 ]
This commit includes two changes. First, enable "EHT MU PPDU With 4x
EHT-LTF And 0.8us GI" in EHT Phy capabilities element since hardware
can support. Second, fix the value of "Maximum number of supported
EHT LTFs" in the same element, where the previous setting of 3 in
Bit 3-4 was incorrect.
Fixes: 348533eb968d ("wifi: mt76: mt7996: add EHT capability init")
Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Link: https://patch.msgid.link/20250114101026.3587702-2-shayne.chen@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
