summaryrefslogtreecommitdiff
path: root/drivers/net/wireless
AgeCommit message (Collapse)Author
2023-04-14wifi: iwlwifi: mvm: add DSM_FUNC_ENABLE_6E value to debugfsJohannes Berg
In order to simplify checking that this value was set up correctly, add it to debugfs. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230413213309.c9a787710e1e.If509b2e510e22d62f3eefb2c54ff1645e331dc23@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-14wifi: iwlwifi: mvm: cleanup beacon_inject_active during hw restartMiri Korenblit
beacon_inject_active turns true and false via debugfs when we inject a beacon. During the time of the beacon injection we can't configure the FW with a beacon cmd. If we have a hw restart during the beacon injection then in the recovery flow we will not be able to configure the beacon cmd to the FW. Fix this by cleaning up this variable after an hw restart. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230413213309.b021bce5e162.Ia5a0a0b5d8734f63077ceaac936176a345f8d3d1@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-14wifi: iwlwifi: mvm: support wowlan info notification version 2Haim Dreyfuss
As part of version 2 we don't need to have wake_packet_bufsize and wake_packet_length. The first one is already calculated by the driver, the latter is sent as part of the wake packet notification. Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230413213309.3b53213b10d4.Ibf2f15aca614def2d262dd267d1aad65931b58f1@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-14wifi: iwlwifi: mvm: make HLTK configuration for PASN station optionalAvraham Stern
When secure LTF is not used, the HLTK is not derived during the PASN authentication. Make the HLTK optional when adding a PASN station. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230413213309.a57f7f3b59bd.Ifa88afb51a2516156153ac321d81556e295036c2@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-14wifi: iwlwifi: mvm: request limiting to 8 MSDUs per A-MSDUJohannes Berg
Due to hardware limitations when splitting up A-MSDUs, it cannot handle an arbitrary number of MSDUs per A-MSDU. Set the bits to ask transmitters to send only 8 MSDUs in one A-MSDU. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230413213309.e6c518f2724f.I15c13d13b38289edbcd64f67d57cf18f6026457a@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-14wifi: iwlwifi: mvm: fix shift-out-of-boundsAvraham Stern
The aux queue is initialized to IWL_MVM_INVALID_QUEUE. This is later used for a bitmask of the queue, which results in a shift-out-of-bounds. Fix it. Fixes: b85f7ebb2497 ("wifi: iwlwifi: mvm: avoid UB shift of snif_queue") Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230413213309.c41a33c32898.Idc15f9eed005345a4137c28ef62efd80a405fad0@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-14wifi: iwlwifi: acpi: support modules with high antenna gainAlon Giladi
Starting from version 4 of ANT_GAIN_CMD verification of ppag table values is done by the FW. Driver has to send the complete table as it appears in the BIOS. Make this change. Signed-off-by: Alon Giladi <alon.giladi@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230413213309.a965365e2336.I1081f00ae309d9225d0529fa2da6ba7e34a8bd4f@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-14wifi: iwlwifi: mvm: don't drop unencrypted MCAST framesAyala Beker
MCAST frames are filtered out by the driver if we are not authorized yet. Fix it to filter out only protected frames. Fixes: 147eb05f24e6 ("iwlwifi: mvm: always tell the firmware to accept MCAST frames in BSS") Signed-off-by: Ayala Beker <ayala.beker@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230413213309.9cedcc27db60.I8fb7057981392660da482dd215e85c15946d3f4b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-14wifi: iwlwifi: dbg: print pc register data once fw dump occurredMukesh Sisodiya
Add debug print for different FW program counter details of different CPU. Program counter pc details will be read from TLV during init. Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230413213309.862790d336a9.I34e2ea05a79e8b2552f7f221bacf3af0166cb9c0@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-13wifi: ieee80211: correctly mark FTM frames non-bufferableJohannes Berg
The checks of whether or not a frame is bufferable were not taking into account that some action frames aren't, such as FTM. Check this, which requires some changes to the function ieee80211_is_bufferable_mmpdu() since we need the whole skb for the checks now. Reviewed-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-13wifi: iwlwifi: mvm: don't set CHECKSUM_COMPLETE for unsupported protocolsAvraham Stern
On Bz devices, CHECKSUM_COMPLETE was set for unsupported protocols which results in a warning. Fix it. Fixes: b6f5b647f694 ("iwlwifi: mvm: handle RX checksum on Bz devices") Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230413102635.a2a35286f0ca.I50daa9445a6465514c44f5096c32adef64beba5f@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-13wifi: iwlwifi: trans: don't trigger d3 interrupt twiceAvraham Stern
When the IPC registers are used for sleep control, setting the IPC sleep bit already triggers an interrupt to the fw, so there is no need to also set the doorbell. Setting also the doorbell triggers the sleep interrupt twice which lead to an assert. Fixes: af08571d3925 ("iwlwifi: pcie: support Bz suspend/resume trigger") Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230413102635.b5f2f6e44d38.I4cb5b6ad4914db47a714e731c4c8b4db679cabce@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-13wifi: iwlwifi: Update configurations for Bnj-a0 and specific rf devicesMukesh Sisodiya
Correction in config data is done for loading the ucode. Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230413102635.879b654c8d83.I7dbea9f411a0b6f47908c4ad6321c7e55cbeb636@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-13wifi: iwlwifi: Update init sequence if tx diversity supportedMukesh Sisodiya
PHY configuration command need to be sent to FW if the tx diversity with SISO is supported. This need to be sent to get the init notification from FW. Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230413102635.c2121c8694a7.Ibee3dd8765ef4b7504660fa228a7c7eff78920af@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-13wifi: iwlwifi: mvm: move function sequenceMukesh Sisodiya
Need to move a function definition and actual changes will be done in following commit. Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230413102635.00a6c203712f.I7c099e5c1954f1daa5a5039b98149b6f081e46ae@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-13wifi: iwlwifi: nvm: Update HE capabilities on 6GHz band for EHT deviceDaniel Gabay
Max A-MPDU length exponent shall be set to 2 for EHT capable device on 6GHz band in order to support 4MB aggregation. Update HE MAC capabilities accordingly for station and softap interfaces. This change requires to add another ieee80211_sband_iftype_data for uhb since high/uhb are no longer the same. Signed-off-by: Daniel Gabay <daniel.gabay@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230413102635.1eee32cfd199.I9c5ff3a6956d509137deca620814935149516fbc@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-13wifi: iwlwifi: mvm: refactor TX csum mode checkJohannes Berg
There are two modes now, and we have two places checking that must be in sync. Refactor the logic into a new small helper function. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230413102635.ef6246f4b73b.I44820ec095634dd0bba3007465cf25e4ce1c77c6@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-13wifi: iwlwifi: mvm: fix A-MSDU checksJohannes Berg
Since Gl A-step devices use the old checksum hardware, we shouldn't use the Bz code to check for A-MSDU combining ability; fix that. Fixes: ec18e7d4d20d ("wifi: iwlwifi: mvm: use old checksum for Bz A-step") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230413102635.8c445b943fee.Ibf772102ca712f59e2ee0cdd4c344011fcf445aa@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-13wifi: iwlwifi: mvm: enable bz hw checksum from c stepGolan Ben Ami
B step doesn't support full checksum yet, move to c step. Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230413102635.697a9d74e84d.I6724874112692a04e29287cac9dad7140532557f@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-13wifi: iwlwifi: mvm: use OFDM rate if IEEE80211_TX_CTL_NO_CCK_RATE is setAvraham Stern
IEEE80211_TX_CTL_NO_CCK_RATE indicates that CCK rates should not be used, but is ignored by the driver. Fix it. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230413102635.a322d18b5eb1.Icc46027a03f90feffb6fab49a5d82e54829d3dd9@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-13wifi: iwlwifi: mvm: convert TID to FW value on queue removeJohannes Berg
On queue remove, we should convert the TID value to the firmware value (8 -> 15) just like we do on queue add. Otherwise, the firmware will not be able to find the correct queue to remove. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230413102635.6651077eaec3.Ia6868c8fc1a92063609bb057b6a618726712d0bb@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-13wifi: iwlwifi: Update configuration for SO,SOF MAC and HR RFMukesh Sisodiya
update the device configuration for HR1 device for SO and SOF device. QuZ device configuration is corrected to support specific CRF. Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230413102635.86f08520323f.Ieccb50de47f877b85732000a0d67b645eeeb0c2a@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-13wifi: iwlwifi: add a validity check of queue_id in iwl_txq_reclaimMiri Korenblit
This function receives the queue id to reclaim packets from. Currently we're passing to it the queue id we received from the FW in the flush response. We don't do any check of this value and it might be invalid. In such case we will refer to a pointer to a queue which might be NULL. Fix this by adding a validity check of the queue id before using it. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230413102635.a9c3fd32bce7.I5fbdcf3b1b80eb96a907116c166f19dc0aae7cb8@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-13wifi: iwlwifi: nvm-parse: enable 160/320 MHz for AP modeJohannes Berg
Initially, 160/320 MHz in AP mode were not supported. After testing, enable the wider bandwidths in AP mode as well. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230413102635.ed04de3a2833.Ie3991179dfaf24880b96a0904a625dbf6b8fd579@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-13wifi: iwlwifi: debug: fix crash in __iwl_err()Johannes Berg
In __iwl_err(), if we rate-limit the message away, then vaf.va is still NULL-initialized by the time we get to the tracing code, which then crashes. When it doesn't get rate-limited out, it's still wrong to reuse the old args2 that was already printed, which is why we bother making a copy in the first place. Assign vaf.va properly to fix this. Fixes: e5f1cc98cc1b ("iwlwifi: allow rate-limited error messages") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230413102635.e27134c6bcd4.Ib3894cd2ba7a5ad5e75912a7634f146ceaa569e2@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-12wifi: rtw88: Add support for the SDIO based RTL8821CS chipsetMartin Blumenstingl
Wire up RTL8821CS chipset support using the new rtw88 SDIO HCI code as well as the existing RTL8821C chipset code. Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Tested-by: Chris Morgan <macromorgan@hotmail.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230405200729.632435-10-martin.blumenstingl@googlemail.com
2023-04-12wifi: rtw88: Add support for the SDIO based RTL8822CS chipsetMartin Blumenstingl
Wire up RTL8822CS chipset support using the new rtw88 SDIO HCI code as well as the existing RTL8822C chipset code. Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230405200729.632435-9-martin.blumenstingl@googlemail.com
2023-04-12wifi: rtw88: Add support for the SDIO based RTL8822BS chipsetJernej Skrabec
Wire up RTL8822BS chipset support using the new rtw88 SDIO HCI code as well as the existing RTL8822B chipset code. Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230405200729.632435-8-martin.blumenstingl@googlemail.com
2023-04-12wifi: rtw88: main: Reserve 8 bytes of extra TX headroom for SDIO cardsMartin Blumenstingl
For SDIO host controllers with DMA support the TX buffer physical memory address need to be aligned at an 8-byte boundary. Reserve 8 bytes of extra TX headroom so we can align the data without re-allocating the transmit buffer. While here, also remove the TODO comment regarding extra headroom for USB and SDIO. For SDIO the extra headroom is now handled and for USB it was not needed so far. Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230405200729.632435-6-martin.blumenstingl@googlemail.com
2023-04-12wifi: rtw88: main: Add the {cpwm,rpwm}_addr for SDIO based chipsetsMartin Blumenstingl
Initialize the rpwm_addr and cpwm_addr for power-saving support on SDIO based chipsets. Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230405200729.632435-5-martin.blumenstingl@googlemail.com
2023-04-12wifi: rtw88: mac: Support SDIO specific bits in the power on sequenceMartin Blumenstingl
Add the code specific to SDIO HCI in the MAC power on sequence. This is based on the RTL8822BS and RTL8822CS vendor drivers. Co-developed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230405200729.632435-4-martin.blumenstingl@googlemail.com
2023-04-12wifi: rtw88: sdio: Add HCI implementation for SDIO based chipsetsMartin Blumenstingl
Add a sub-driver for SDIO based chipsets which implements the following functionality: - register accessors for 8, 16 and 32 bits for all states of the card (including usage of 4x 8 bit access for one 32 bit buffer if the card is not fully powered on yet - or if it's fully powered on then 1x 32 bit access is used) - checking whether there's space in the TX FIFO queue to transmit data - transfers from the host to the device for actual network traffic, reserved pages (for firmware download) and H2C (host-to-card) transfers - receiving data from the device - deep power saving state The transmit path is optimized so DMA-capable SDIO host controllers can directly use the buffers provided because the buffer's physical addresses are 8 byte aligned. The receive path is prepared to support RX aggregation where the chipset combines multiple MAC frames into one bigger buffer to reduce SDIO transfer overhead. Co-developed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230405200729.632435-3-martin.blumenstingl@googlemail.com
2023-04-12wifi: rtw88: Clear RTW_FLAG_POWERON early in rtw_mac_power_switch()Martin Blumenstingl
The SDIO HCI implementation needs to know when the MAC is powered on. This is needed because 32-bit register access has to be split into 4x 8-bit register access when the MAC is not fully powered on or while powering off. When the MAC is powered on 32-bit register access can be used to reduce the number of transfers but splitting into 4x 8-bit register access still works in that case. During the power on sequence is how RTW_FLAG_POWERON is only set when the power on sequence has completed successfully. During power off however RTW_FLAG_POWERON is set. This means that the upcoming SDIO HCI implementation does not know that it has to use 4x 8-bit register accessors. Clear the RTW_FLAG_POWERON flag early when powering off the MAC so the whole power off sequence is processed with RTW_FLAG_POWERON unset. This will make it possible to use the RTW_FLAG_POWERON flag in the upcoming SDIO HCI implementation. Note that a failure in rtw_pwr_seq_parser() while applying chip->pwr_off_seq can theoretically result in the RTW_FLAG_POWERON flag being cleared while the chip is still powered on. However, depending on when the failure occurs in the power off sequence the chip may be on or off. Even the original approach of clearing RTW_FLAG_POWERON only when the power off sequence has been applied successfully could end up in some corner case where the chip is powered off but RTW_FLAG_POWERON was not cleared. Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230405200729.632435-2-martin.blumenstingl@googlemail.com
2023-04-12wifi: ath12k: Remove redundant pci_clear_masterCai Huoqing
Remove pci_clear_master to simplify the code, the bus-mastering is also cleared in do_pci_disable_device, like this: ./drivers/pci/pci.c:2197 static void do_pci_disable_device(struct pci_dev *dev) { u16 pci_command; pci_read_config_word(dev, PCI_COMMAND, &pci_command); if (pci_command & PCI_COMMAND_MASTER) { pci_command &= ~PCI_COMMAND_MASTER; pci_write_config_word(dev, PCI_COMMAND, pci_command); } pcibios_disable_device(dev); }. And dev->is_busmaster is set to 0 in pci_disable_device. Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230323112613.7550-3-cai.huoqing@linux.dev
2023-04-12wifi: ath10k: Remove redundant pci_clear_masterCai Huoqing
Remove pci_clear_master to simplify the code, the bus-mastering is also cleared in do_pci_disable_device, like this: ./drivers/pci/pci.c:2197 static void do_pci_disable_device(struct pci_dev *dev) { u16 pci_command; pci_read_config_word(dev, PCI_COMMAND, &pci_command); if (pci_command & PCI_COMMAND_MASTER) { pci_command &= ~PCI_COMMAND_MASTER; pci_write_config_word(dev, PCI_COMMAND, pci_command); } pcibios_disable_device(dev); }. And dev->is_busmaster is set to 0 in pci_disable_device. Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230323112613.7550-2-cai.huoqing@linux.dev
2023-04-12wifi: ath11k: Remove redundant pci_clear_masterCai Huoqing
Remove pci_clear_master to simplify the code, the bus-mastering is also cleared in do_pci_disable_device, like this: ./drivers/pci/pci.c:2197 static void do_pci_disable_device(struct pci_dev *dev) { u16 pci_command; pci_read_config_word(dev, PCI_COMMAND, &pci_command); if (pci_command & PCI_COMMAND_MASTER) { pci_command &= ~PCI_COMMAND_MASTER; pci_write_config_word(dev, PCI_COMMAND, pci_command); } pcibios_disable_device(dev); }. And dev->is_busmaster is set to 0 in pci_disable_device. Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230323112613.7550-1-cai.huoqing@linux.dev
2023-04-12wifi: ath11k: Send 11d scan start before WMI_START_SCAN_CMDIDManikanta Pubbisetty
Firmwares advertising the support of triggering 11d algorithm on the scan results of a regular scan expects driver to send WMI_11D_SCAN_START_CMDID before sending WMI_START_SCAN_CMDID. Triggering 11d algorithm on the scan results of a normal scan helps in completely avoiding a separate 11d scan for determining regdomain. This indirectly helps in speeding up connections on station interfaces on the chipsets supporting 11D scan. To enable this feature, send WMI_11D_SCAN_START_CMDID just before sending WMI_START_SCAN_CMDID if the firmware advertises WMI_TLV_SERVICE_SUPPORT_11D_FOR_HOST_SCAN service flag. WCN6750 & WCN6855 supports this feature. Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-01160-QCAMSLSWPLZ-1 Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23 Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230315161817.29627-1-quic_mpubbise@quicinc.com
2023-04-12wifi: ath11k: fix writing to unintended memory regionP Praneesh
While initializing spectral, the magic value is getting written to the invalid memory address leading to random boot-up crash. This occurs due to the incorrect index increment in ath11k_dbring_fill_magic_value function. Fix it by replacing the existing logic with memset32 to ensure there is no invalid memory access. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1-01838-QCAHKSWPL_SILICONZ-1 Fixes: d3d358efc553 ("ath11k: add spectral/CFR buffer validation support") Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230321052900.16895-1-quic_ppranees@quicinc.com
2023-04-12wifi: ath11k: Fix invalid management rx frame length issueBhagavathi Perumal S
The WMI management rx event has multiple arrays of TLVs, however the common WMI TLV parser won't handle multiple TLV tags of same type. So the multiple array tags of WMI management rx TLV is parsed incorrectly and the length calculated becomes wrong when the target sends multiple array tags. Add separate TLV parser to handle multiple arrays for WMI management rx TLV. This fixes invalid length issue when the target sends multiple array tags. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Signed-off-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Co-developed-by: Nagarajan Maran <quic_nmaran@quicinc.com> Signed-off-by: Nagarajan Maran <quic_nmaran@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230320133840.30162-1-quic_nmaran@quicinc.com
2023-04-12wifi: ath11k: fix rssi station dump not updated in QCN9074P Praneesh
In QCN9074, station dump signal values display default value which is -95 dbm, since there is firmware header change for HAL_RX_MPDU_START between QCN9074 and IPQ8074 which cause wrong peer_id fetch from msdu. Fix this by updating hal_rx_mpdu_info with corresponding QCN9074 tlv format. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-01695-QCAHKSWPL_SILICONZ-1 Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230320110312.20639-1-quic_ppranees@quicinc.com
2023-04-12wifi: ath11k: Configure the FTM responder role using firmware capability flagGanesh Babu Jothiram
Fine Time Measurement(FTM) is offloaded feature to firmware. Hence, the configuration of FTM responder role is done using firmware capability flag instead of hw param. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Signed-off-by: Ganesh Babu Jothiram <quic_gjothira@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230317072034.8217-1-quic_gjothira@quicinc.com
2023-04-12wifi: ath11k: Optimize 6 GHz scan timeManikanta Pubbisetty
Currently, time taken to scan all supported channels on WCN6750 is ~8 seconds and connection time is almost 10 seconds. WCN6750 supports three Wi-Fi bands (i.e., 2.4/5/6 GHz) and the numbers of channels for scan come around ~100 channels (default case). Since the chip doesn't have support for DBS (Dual Band Simultaneous), scans cannot be parallelized resulting in longer scan times. Among the 100 odd channels, ~60 channels are in 6 GHz band. Therefore, optimizing the scan for 6 GHz channels will bring down the overall scan time. WCN6750 firmware has support to scan a 6 GHz channel based on co-located AP information i.e., RNR IE which is found in the legacy 2.4/5 GHz scan results. When a scan request with all supported channel list is enqueued to the firmware, then based on WMI_SCAN_CHAN_FLAG_SCAN_ONLY_IF_RNR_FOUND scan channel flag, firmware will scan only those 6 GHz channels for which RNR IEs are found in the legacy scan results. In the proposed design, based on NL80211_SCAN_FLAG_COLOCATED_6GHZ scan flag, driver will set the WMI_SCAN_CHAN_FLAG_SCAN_ONLY_IF_RNR_FOUND flag for non-PSC channels. Since there is high probability to find 6 GHz APs on PSC channels, these channels are always scanned. Only non-PSC channels are selectively scanned based on cached RNR information from the legacy scan results. If NL80211_SCAN_FLAG_COLOCATED_6GHZ is not set in the scan flags, then scan will happen on all supported channels (default behavior). With these optimizations, scan time is improved by 1.5-1.8 seconds on WCN6750. Similar savings have been observed on WCN6855. Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00887-QCAMSLSWPLZ-1 Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.16 Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230323060913.10097-1-quic_mpubbise@quicinc.com
2023-04-11wifi: mac80211_hwsim: fix potential NULL deref in hwsim_pmsr_report_nl()Eric Dumazet
syzbot reported a NULL dereference caused by a missing check in hwsim_pmsr_report_nl(), and bisected the issue to cited commit. v2: test the nlattr before using nla_data() on it (Simon Horman) general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] CPU: 0 PID: 5084 Comm: syz-executor104 Not tainted 6.3.0-rc4-next-20230331-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/02/2023 RIP: 0010:jhash+0x339/0x610 include/linux/jhash.h:95 Code: 83 fd 01 0f 84 5f ff ff ff eb de 83 fd 05 74 3a e8 ac f5 71 fd 48 8d 7b 05 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 48 89 fa 83 e2 07 38 d0 7f 08 84 c0 0f 85 96 02 00 00 RSP: 0018:ffffc90003abf298 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 0000000000000004 RCX: 0000000000000000 RDX: 0000000000000001 RSI: ffffffff84111ba4 RDI: 0000000000000009 RBP: 0000000000000006 R08: 0000000000000005 R09: 000000000000000c R10: 0000000000000006 R11: 0000000000000000 R12: 000000004d2c27cd R13: 000000002bd9e6c2 R14: 000000002bd9e6c2 R15: 000000002bd9e6c2 FS: 0000555556847300(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000045ad50 CR3: 0000000078aa6000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> rht_key_hashfn include/linux/rhashtable.h:159 [inline] __rhashtable_lookup include/linux/rhashtable.h:604 [inline] rhashtable_lookup include/linux/rhashtable.h:646 [inline] rhashtable_lookup_fast include/linux/rhashtable.h:672 [inline] get_hwsim_data_ref_from_addr+0xb9/0x600 drivers/net/wireless/virtual/mac80211_hwsim.c:757 hwsim_pmsr_report_nl+0xe7/0xd50 drivers/net/wireless/virtual/mac80211_hwsim.c:3764 genl_family_rcv_msg_doit.isra.0+0x1e6/0x2d0 net/netlink/genetlink.c:968 genl_family_rcv_msg net/netlink/genetlink.c:1048 [inline] genl_rcv_msg+0x4ff/0x7e0 net/netlink/genetlink.c:1065 netlink_rcv_skb+0x165/0x440 net/netlink/af_netlink.c:2572 genl_rcv+0x28/0x40 net/netlink/genetlink.c:1076 netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline] netlink_unicast+0x547/0x7f0 net/netlink/af_netlink.c:1365 netlink_sendmsg+0x925/0xe30 net/netlink/af_netlink.c:1942 sock_sendmsg_nosec net/socket.c:724 [inline] sock_sendmsg+0xde/0x190 net/socket.c:747 ____sys_sendmsg+0x71c/0x900 net/socket.c:2501 ___sys_sendmsg+0x110/0x1b0 net/socket.c:2555 __sys_sendmsg+0xf7/0x1c0 net/socket.c:2584 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Fixes: 2af3b2a631b1 ("mac80211_hwsim: add PMSR report support via virtio") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jaewan Kim <jaewan@google.com> Cc: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Jaewan Kim <jaewan@google.com> Link: https://lore.kernel.org/r/20230404171658.917361-1-edumazet@google.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-11wifi: iwlwifi: fix duplicate entry in iwl_dev_info_tableGregory Greenman
There're two identical entries for ax1650 device in iwl_dev_info_table. Remove one of the duplicate entries. Fixes: 953e66a7238b ("iwlwifi: add new ax1650 killer device") Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230410140721.897683-2-gregory.greenman@intel.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-11wifi: iwlwifi: mvm: fix the order of TIMING_MEASUREMENT notificationsGregory Greenman
Host commands and notifications are expected to be ordered in iwl_mvm_groups array. Fix the order of two new TIMING_MEASUREMENT notifications. Fixes: c7eca79def44 ("wifi: iwlwifi: mvm: report hardware timestamps in RX/TX status") Reported-by: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/linux-wireless/20230331175121.GA3127046@dev-arch.thelio-3990X/ Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Tested-by: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/r/20230410140721.897683-1-gregory.greenman@intel.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Conflicts: drivers/net/ethernet/google/gve/gve.h 3ce934558097 ("gve: Secure enough bytes in the first TX desc for all TCP pkts") 75eaae158b1b ("gve: Add XDP DROP and TX support for GQI-QPL format") https://lore.kernel.org/all/20230406104927.45d176f5@canb.auug.org.au/ https://lore.kernel.org/all/c5872985-1a95-0bc8-9dcc-b6f23b439e9d@tessares.net/ Adjacent changes: net/can/isotp.c 051737439eae ("can: isotp: fix race between isotp_sendsmg() and isotp_release()") 96d1c81e6a04 ("can: isotp: add module parameter for maximum pdu size") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-05Merge tag 'wireless-next-2023-04-05' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.3 Smaller pull request this time, sending this early to fix the conflict in mac80211. Nothing really special this time, only smaller changes. * enable Wi-Fi 7 (EHT) mesh support * tag 'wireless-next-2023-04-05' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (37 commits) wifi: rt2x00: Fix memory leak when handling surveys wifi: b43legacy: Remove the unused function prev_slot() wifi: rtw89: Remove redundant pci_clear_master wifi: rtw89: fix potential race condition between napi_init and napi_enable wifi: rtw89: config EDCCA threshold during scan to prevent TX failed wifi: rtw89: fix incorrect channel info during scan due to ppdu_sts filtering wifi: rtw89: remove superfluous H2C of join_info wifi: rtw89: set data lowest rate according to AP supported rate wifi: rtw89: add counters of register-based H2C/C2H wifi: rtw89: coex: Update Wi-Fi Bluetooth coexistence version to 7.0.1 wifi: rtw89: coex: Add report control v5 variation wifi: rtw89: coex: Update RTL8852B LNA2 hardware parameter wifi: rtw89: coex: Not to enable firmware report when WiFi is power saving wifi: rtw89: coex: Add LPS protocol radio state for RTL8852B bcma: remove unused mips_read32 function bcma: Use of_address_to_resource() wifi: mwifiex: remove unused evt_buf variable wifi: brcmsmac: ampdu: remove unused suc_mpdu variable wifi: rtlwifi: fix incorrect error codes in rtl_debugfs_set_write_reg() wifi: rtlwifi: fix incorrect error codes in rtl_debugfs_set_write_rfreg() ... ==================== Link: https://lore.kernel.org/r/20230405111037.4792BC43443@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-05Merge tag 'wireless-2023-04-05' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless Kalle Valo says: ==================== wireless fixes for v6.3 mt76 has a fix for leaking cleartext frames on a certain scenario and two firmware file handling related fixes. For brcmfmac we have a fix for an older SDIO suspend regression and for ath11k avoiding a kernel crash during hibernation with SUSE kernels. * tag 'wireless-2023-04-05' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: wifi: mt76: ignore key disable commands wifi: ath11k: reduce the MHI timeout to 20s wifi: mt76: mt7921: fix fw used for offload check for mt7922 wifi: mt76: mt7921: Fix use-after-free in fw features query. wifi: brcmfmac: Fix SDIO suspend/resume regression ==================== Link: https://lore.kernel.org/r/20230405105536.4E946C433D2@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-03wifi: mt76: ignore key disable commandsFelix Fietkau
This helps avoid cleartext leakage of already queued or powersave buffered packets, when a reassoc triggers the key deletion. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230330091259.61378-1-nbd@nbd.name
2023-04-03wifi: ath11k: reduce the MHI timeout to 20sKalle Valo
Currently ath11k breaks after hibernation, the reason being that ath11k expects that the wireless device will have power during suspend and the firmware will continue running. But of course during hibernation the power from the device is cut off and firmware is not running when resuming, so ath11k will fail. (The reason why ath11k needs the firmware running is the interaction between mac80211 and MHI stack, it's a long story and more info in the bugzilla report.) In SUSE kernels the watchdog timeout is reduced from the default 120 to 60 seconds: CONFIG_DPM_WATCHDOG_TIMEOUT=60 But as the ath11k MHI timeout is 90 seconds the kernel will crash before will ath11k will recover in resume callback. To avoid the crash reduce the MHI timeout to just 20 seconds. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.9 Link: https://bugzilla.kernel.org/show_bug.cgi?id=214649 Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230329162038.8637-1-kvalo@kernel.org
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-04 05:03:11 +0000