summaryrefslogtreecommitdiff
path: root/drivers/net/wireless
AgeCommit message (Collapse)Author
2018-05-12wil6210: Initialize reply struct of the WMI commandsAlexei Avshalom Lazar
WMI command reply saved in uninitialized struct. In order to avoid accessing unset values from FW initialize the reply struct. Signed-off-by: Alexei Avshalom Lazar <ailizaro@codeaurora.org> Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-12wil6210: move WMI functionality out of wil_cfg80211_mgmt_txDedy Lansky
Rearrange the code by having new function wmi_mgmt_tx() to take care of the WMI part of wil_cfg80211_mgmt_tx(). Signed-off-by: Dedy Lansky <dlansky@codeaurora.org> Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-12wil6210: change reply_size arg to u16 in wmi_callLior David
Change the type of the argument reply_size from u8 to u16 in order to support reply sizes > 255 bytes. The driver already supports u16 reply size in all other places, this was the only missing change. Signed-off-by: Lior David <liord@codeaurora.org> Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-12wil6210: fix call to wil6210_disconnect during unloadLior David
Move the call to wil6210_disconnect so it will be called before unregister_netdevice. This is because it calls netif_carrier_off which is forbidden to call on an unregistered net device. Calling netif_carrier_off can add a link watch event which might be handled after net device was freed, causing a kernel oops. Signed-off-by: Lior David <liord@codeaurora.org> Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-12wil6210: align to latest auto generated wmi.hAhmad Masri
Align to latest version of the auto generated wmi file describing the interface with FW Signed-off-by: Ahmad Masri <amasri@codeaurora.org> Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-12wil6210: disable tracing config optionAlexei Avshalom Lazar
Disable WIL6210_TRACING by default to avoid its performance overhead. Signed-off-by: Alexei Avshalom Lazar <ailizaro@codeaurora.org> Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-12ath10k: replace bit shifts with the BIT() macro for rx desc bitsGovind Singh
Use the BIT() macro from 'linux/bitops.h' to define the rx desc bit flags to have consistency with new definitions. Signed-off-by: Govind Singh <govinds@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-12ath10k: hw: make consistent usage of ATH10K_FW_DIR in pathsMarcus Folkesson
For some reason not all entries used ATH10K_FW_DIR so fix that. No functional changes. Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-12ath10k: remove variables which set but not usedKenneth Lu
Variable buf_len and num_vdev_stats are being assigned but never read. These are redundant and can be remove. Signed-off-by: Kenneth Lu <kuohsianglu@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-12ath10k: fix return value check in wake_tx_q opErik Stromdahl
ath10k_mac_tx_push_txq returns either a postive integer (length) on success or a negative error code on error. The "if (ret) break;" statement will thus always break out of the loop immediately after ath10k_mac_tx_push_txq has returned (making the loop pointless). A side effect of this fix is that we will iterate the queue until ath10k_mac_tx_push_txq returns -ENOENT. This will make sure the queue is not added back to ar->txqs when it is empty. This could potentially improve performance somewhat (I have seen a small improvement with SDIO devices). Signed-off-by: Erik Stromdahl <erik.stromdahl@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-12ath10k: snoc: Remove owner assignment from platform_driverFabio Estevam
Structure platform_driver does not need to set the owner field, as this will be populated by the driver core. Generated by scripts/coccinelle/api/platform_no_drv_owner.cocci. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-12ath10k: add quiet mode support for QCA6174/QCA9377Yu Wang
To enable thermal throttling for QCA6174 and QCA9377, implement gen_pdev_set_quiet_mode for them. With this change, quiet period for QCA6174/QCA9377 can be also set/get via debugfs. Usage: To set quiet period: echo <period> > /sys/kernel/debug/ieee80211/phyX/ath10k/quiet_period To get the current quiet period: cat /sys/kernel/debug/ieee80211/phyX/ath10k/quiet_period This change has been verified with QCA6174 hw3.2(fw: WLAN_RM.4.4.1-00102-QCARMSWP-1). Signed-off-by: Yu Wang <yyuwang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-12rsi: fix spelling mistake: "thead" -> "thread"Colin Ian King
Trivial fix to spelling mistake in rsi_dbg debug message text Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-12mt76x2: add a polling delay in mt76x2_mac_stop routineLorenzo Bianconi
Add a usleep_range in mt76x2_mac_stop routine in order to add a polling delay checking values of MT_MAC_STATUS and IBI_R12 registers Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Acked-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-12wireless-drivers: Dynamically allocate struct station_infoToke Høiland-Jørgensen
Since the addition of the TXQ stats to cfg80211, the station_info struct has grown to be quite large, which results in warnings when allocated on the stack. Fix the affected places to do dynamic allocations instead. Fixes: 52539ca89f36 ("cfg80211: Expose TXQ stats and parameters to userspace") Reviewed-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-10Merge tag 'mac80211-for-davem-2018-05-09' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== We only have a few fixes this time: * WMM element validation * SAE timeout * add-BA timeout * docbook parsing * a few memory leaks in error paths ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-09mwifiex: increase TX threashold to avoid TX timeout during ED MAC testGanapathi Bhat
While carrying energy detection(ED) tests, the chip will stop transmission upon detecting an energy in the connected channel. As a feedback, driver will stop dequeuing TX packets and due to which wmm_tx_pending keep incremeting. Once wmm_tx_pending reaches 100, driver calls netif_tx_stop_queue(). If TX ques is not restarted within 5(watchdog_timeo) seconds, it will result in TX timeout. The ED test is carried out for one minute and the current threshold of 100 is easily overcome by the traffic, cuasing TX timeouts. To fix this increase the threshold to 400. Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Ganapathi Bhat <gbhat@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-09mwifiex: delete unneeded includeJulia Lawall
Nothing that is defined in 11ac.h is referenced in cmdevt.c. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-09brcmfmac: Add support for bcm43364 wireless chipsetSean Lanigan
Add support for the BCM43364 chipset via an SDIO interface, as used in e.g. the Murata 1FX module. The BCM43364 uses the same firmware as the BCM43430 (which is already included), the only difference is the omission of Bluetooth. However, the SDIO_ID for the BCM43364 is 02D0:A9A4, giving it a MODALIAS of sdio:c00v02D0dA9A4, which doesn't get recognised and hence doesn't load the brcmfmac module. Adding the 'A9A4' ID in the appropriate place triggers the brcmfmac driver to load, and then correctly use the firmware file 'brcmfmac43430-sdio.bin'. Signed-off-by: Sean Lanigan <sean@lano.id.au> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-09rtlwifi: remove duplicate definition of antenna number for btcoexPing-Ke Shih
Two enumerations bt_total_ant_num and bt_ant_num are identical, so one can be removed. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-07mac80211_hwsim: fix a possible memory leak in hwsim_new_radio_nl()YueHaibing
'hwname' should be freed before leaving from the error handling cases, otherwise it will cause mem leak Fixes: cb1a5bae5684 ("mac80211_hwsim: add permanent mac address option for new radios") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-05-04mt76x2: fix avg_rssi estimationLorenzo Bianconi
Add leftover filter coefficients in IIR rssi estimation Fixes: 7bc04215a66b ("mt76: add driver code for MT76x2e") Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Acked-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-04ipw2200: fix spelling mistake: "functionalitis" -> "functionalities"Colin Ian King
Trivial fix to spelling mistake in module parameter description text Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-04mt76x2: remove unnecessary break in mt76x2_mac_process_tx_rate()Lorenzo Bianconi
Remove unnecessary break statement in the default case of bw switch block in mt76x2_mac_process_tx_rate routine Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-04rtlwifi: fix spelling mistake: "dismatch" -> "mismatch"Colin Ian King
Trivial fix to spelling mistake in RT_TRACE message text. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-04rt2x00: check against flushing empty queueStanislaw Gruszka
We have check if queue is not empty when start flushing queues on by mac80211 callback, but we also can start flushing queues by internal driver calls. So move check into rt2x00queue_flush_queue() to assure we do not flush empty queue anytime. Additionally add warning if we start to kick empty queue as in such situation we set wrong index in the HW queue, what can confuse the HW and have various negative consequences. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-04rt2x00: call sta_add/remove directly in rt2800Stanislaw Gruszka
Only rt2800 subdriver of rt2x00 implement sta_add() and sta_remove(), we do not need generic version of those. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-30brcmfmac: coarse support for PCIe shared structure rev7Franky Lin
Revision 7 of PCIe dongle interface increases the item size of tx and rx complete rings to accommodate extra payload for new feature. This patch simply bump up the size of these two rings without adding the support for utilizing the new space. This makes brcmfmac compatible with rev7 firmware. Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-30brcmfmac: add hostready indicationFranky Lin
A hostready signal is introduced to inform firmware through mailbox doorbell1 when common ring initialized or D3 exited. Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-30brcmfmac: constify firmware mapping tablesArend Van Spriel
The information in the firmware mapping does not need to be modified so it can be static const. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-30brcmfmac: use nl80211_band directly to get ieee80211 channelFranky Lin
The enum nl80211_band used to retrieve wiphy->bands is the same as wiphy->bands->band which is checked by wiphy_register(). So it can be used directly as parameter of ieee80211_channel_to_frequency(). Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-30brcmfmac: reports boottime_ns while informing bssFranky Lin
Provides a timestamp in bss information so user space can see when the bss info was updated. Since tsf is not available from the dongle events boottime is reported instead. Reported-by: Dmitry Shmidt <dimitrysh@google.com> Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-30brcmfmac: check p2pdev mac address uniquenessArend Van Spriel
The mac address for p2pdev must be different from the primary interface due to firmware requirement. Add an explicit check for this requirement if user-space provides a mac address. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-30ipw2100: fix spelling mistake: "decsribed" -> "described"Colin Ian King
Trivial fix to spelling mistake in comment and in the ord_data text Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-30rt2x00: fix spelling mistake in various macros, UKNOWN -> UNKNOWNColin Ian King
Rename several macros that contain mispellings of UNKNOWN Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-30rsi_91x: fix uninitialized variableGustavo A. R. Silva
There is a potential execution path in which variable ret is returned without being properly initialized previously. Fix this by storing the value returned by function rsi_usb_master_reg_write into _ret_. Addresses-Coverity-ID: 1468407 ("Uninitialized scalar variable") Fixes: 16d3bb7b2f37 ("rsi: disable fw watchdog timer during reset") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-30rsi_91x: fix structurally dead codeGustavo A. R. Silva
Function rsi_hal_key_config returns before reaching code at line 922 if (status), hence this code is structurally dead. Fix this by storing the value returned by rsi_hal_load_key into _status_ for its further evaluation and use. Addresses-Coverity-ID: 1468409 ("Structurally dead code") Fixes: 4fd6c4762f37 ("rsi: roaming enhancements") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-30wlcore: sdio: allow pm to handle sdio powerEyal Reizer
pm_runtime handles sdio power on and power off transitions. An old workaround for trying to control the power explicitly from the driver was in fact causing failures on suspend/resume as the mmc layer already power the module on resume. In case of resume pm_runtime_get sync returns a positive device's usage count causing the driver to try an re-initialize an already initialized device. This was causing sdio bus failure on resume. Remove this manual power on/off sequence as it is in-fact not needed. Signed-off-by: Eyal Reizer <eyalr@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-30qtnfmac: fix qtnf_netdev_hard_start_xmit()'s return typeLuc Van Oostenryck
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, but the implementation in this driver returns an 'int'. Fix this by returning 'netdev_tx_t' in this driver too. Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Reviewed-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-30net: wireless: b43legacy: Replace GFP_ATOMIC with GFP_KERNEL in dma_tx_fragmentJia-Ju Bai
dma_tx_fragment() is never called in atomic context. dma_tx_fragment() is only called by b43legacy_dma_tx(), which is only called by b43legacy_tx_work(). b43legacy_tx_work() is only set a parameter of INIT_WORK() in b43legacy_wireless_init(). Despite never getting called from atomic context, dma_tx_fragment() calls alloc_skb() with GFP_ATOMIC, which does not sleep for allocation. GFP_ATOMIC is not necessary and can be replaced with GFP_KERNEL, which can sleep and improve the possibility of sucessful allocation. This is found by a static analysis tool named DCNS written by myself. And I also manually check it. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-30mwifiex: keep user configured mac address during changing virtual interfaceXinming Hu
During changing virtual interface, keep using previous net device mac address. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-30mwifiex: always configure firmware mac address during changing virtual interfaceXinming Hu
When interface type changed, firmware using a new connction pointer. We need Re-configure the mac address. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-30mwifiex: make firmware mac address consistent with host configurationXinming Hu
For user configurated mac address, directly set to firmware with no change. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-30mwifiex: fix mwifiex_hard_start_xmit()'s return typeLuc Van Oostenryck
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, but the implementation in this driver returns an 'int'. Fix this by returning 'netdev_tx_t' in this driver too. Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-30mt76: check for pending reset before attempting to schedule txFelix Fietkau
The check within mt76_txq_send_burst is not enough, as it happens after a first frame has already been queued up Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-30mt76: add rcu locking around tx schedulingFelix Fietkau
Fixes a reported lockdep error in mac80211: [ 179.867321] ============================= [ 179.871510] WARNING: suspicious RCU usage [ 179.875528] 4.14.32 #0 Not tainted [ 179.878924] ----------------------------- [ 179.882981] backports-2017-11-01/net/mac80211/tx.c:594 suspicious rcu_dereference_check() usage! [ 179.891785] [ 179.891785] other info that might help us debug this: [ 179.891785] [ 179.899824] [ 179.899824] rcu_scheduler_active = 2, debug_locks = 1 [ 179.906343] 2 locks held by ksoftirqd/0/7: [ 179.910479] #0: (&(&q->lock)->rlock){+.-.}, at: [<86b207a4>] mt76_dma_tx_cleanup+0x64/0x354 [mt76] [ 179.919734] #1: (&(&fq->lock)->rlock){+.-.}, at: [<87238410>] ieee80211_tx_dequeue+0x54/0xc3c [mac80211] [ 179.929890] [ 179.929890] stack backtrace: [ 179.934257] CPU: 0 PID: 7 Comm: ksoftirqd/0 Not tainted 4.14.32 #0 [ 179.940421] Stack : 00000000 00000000 00000000 00000000 80e0fce2 00000036 00000000 00000000 [ 179.948864] 87c3d24c 80696377 8061039c 00000000 00000007 00000001 87c5db78 6534689d [ 179.957306] 00000000 00000000 80e10000 87c5da74 00000001 0000015a 00000007 00000000 [ 179.965748] 00000000 806a0000 000e4171 00000000 00000000 00000000 ffffffff 00000001 [ 179.974189] 806c0000 8692b240 86b000d0 87316fe4 00000001 802c9a68 00000000 80700000 [ 179.982632] ... [ 179.985104] Call Trace: [ 179.987582] [<80010a48>] show_stack+0x58/0x100 [ 179.992040] [<804c2c58>] dump_stack+0xe8/0x170 [ 179.996868] [<87234a04>] ieee80211_tx_h_select_key+0xa8/0x5b8 [mac80211] [ 180.004299] [<87238d44>] ieee80211_tx_dequeue+0x988/0xc3c [mac80211] [ 180.011048] [<86b230dc>] mt76_txq_schedule+0x110/0x3a4 [mt76] [ 180.016821] [<86b209d0>] mt76_dma_tx_cleanup+0x290/0x354 [mt76] [ 180.022777] [<86be2e60>] mt7603_tx_tasklet+0x40/0x6c [mt7603e] [ 180.028637] [<80037058>] tasklet_action+0x110/0x1ec [ 180.033532] [<804e1dac>] __do_softirq+0x164/0x35c [ 180.038235] [<80037174>] run_ksoftirqd+0x40/0x84 [ 180.042870] [<800580c8>] smpboot_thread_fn+0x1a8/0x1d8 [ 180.048023] [<800542e8>] kthread+0x130/0x144 [ 180.052297] [<8000b1f8>] ret_from_kernel_thread+0x14/0x1c Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-30mt76: add rcu locking in tid reorder functionFelix Fietkau
Avoids having the tid or station entry disappear prematurely. Also cancel the reorder work earlier to avoid further processing delayed by waiting for the lock to be released Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-30mt76: fix concurrent rx calls on A-MPDU releaseFelix Fietkau
Add a spinlock in mt76_rx_complete. Without this, multiple stats updates could happen in parallel, which can lead to deadlocks. There are probably more corner cases fixed by this change. Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-30mt76x2: fix is_mt7612 routineLorenzo Bianconi
Fix is_mt7612 routine since asic version is set in mt76_dev revision field and not in mt76x2_dev one. Moreover remove mt76x2_dev rev field since it is never used in the driver Fixes: 7bc04215a66b ('mt76: add driver code for MT76x2e') Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Acked-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-27Merge tag 'wireless-drivers-for-davem-2018-04-26' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for 4.17 A few fixes for 4.17 but nothing really special. The new ETSI WMM parameter support for iwlwifi is not technically a bugfix but important for regulatory compliance. iwlwifi * use new ETSI WMM parameters from regulatory database * fix a regression with the older firmware API 31 (eg. 31.560484.0) brcmfmac * fix a double free in nvmam loading fails rtlwifi * yet another fix for ant_sel module parameter ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-04 07:20:49 +0000