summaryrefslogtreecommitdiff
path: root/drivers/net/wireless
AgeCommit message (Collapse)Author
2020-12-08mwifiex: Fix possible buffer overflows in mwifiex_cmd_802_11_ad_hoc_startZhang Xiaohui
mwifiex_cmd_802_11_ad_hoc_start() calls memcpy() without checking the destination size may trigger a buffer overflower, which a local user could use to cause denial of service or the execution of arbitrary code. Fix it by putting the length check before calling memcpy(). Signed-off-by: Zhang Xiaohui <ruc_zhangxiaohui@163.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201206084801.26479-1-ruc_zhangxiaohui@163.com
2020-12-07brcmfmac: remove redundant assignment to pointer 'entry'Colin Ian King
The pointer 'entry' is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201204180459.1148257-1-colin.king@canonical.com
2020-12-07adm8211: fix error return code in adm8211_probe()Zhang Changzhong
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: cc0b88cf5ecf ("[PATCH] Add adm8211 802.11b wireless driver") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1607071638-33619-1-git-send-email-zhangchangzhong@huawei.com
2020-12-07rtw88: declare hw supports ch 144Zong-Zhe Yang
When driver was developed, FCC regulation didn't enable channel 144 and there was no demand for channel 144 at that time. Although HW actually supports channel 144, driver didn't announce channel 144. Therefore, channel 144 (20 MHz), channel 142 (40 MHz) and channel 138 (80 MHz) couldn't be used. Today, channel 144 has been enabled by regulations and is gradually being supported. With test requirements, we declare hw supports channel 144. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201204013823.3729-1-pkshih@realtek.com
2020-12-07rtw88: coex: fix missing unitialization of variable 'interval'Colin Ian King
Currently the variable 'interval' is not initialized and is only set to 1 when oex_stat->bt_418_hid_existi is true. Fix this by inintializing variable interval to 0 (which I'm assuming is the intended default). Addresses-Coverity: ("Uninitalized scalar variable") Fixes: 5b2e9a35e456 ("rtw88: coex: add feature to enhance HID coexistence performance") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201203175142.1071738-1-colin.king@canonical.com
2020-12-07wilc1000: remove redundant assignment to pointer vifColin Ian King
The assignment to pointer vif is redundant as the assigned value is never read, hence it can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201203174316.1071446-1-colin.king@canonical.com
2020-12-07mwifiex: change license text of Makefile and README from MARVELL to NXPGanapathi Bhat
As of 6-DEC-2019, NXP has acquired Marvell’s Wireless business unit. This change is to update the license text accordingly. commit 932183aa35c6 ("mwifiex: change license text from MARVELL to NXP") does this, but it left out two files. Signed-off-by: James Cao <zheng.cao@nxp.com> Signed-off-by: Cathy Luo <xiaohua.luo@nxp.com> Signed-off-by: Ganapathi Bhat <ganapathi.bhat@nxp.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1606814307-32715-1-git-send-email-ganapathi.bhat@nxp.com
2020-12-07mwl8k: switch from 'pci_' to 'dma_' APIChristophe JAILLET
he wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below and has been hand modified to replace GFP_ with a correct flag. It has been compile tested. When memory is allocated in 'mwl8k_rxq_init()' and 'mwl8k_txq_init()' GFP_KERNEL can be used because this flag is already used in a 'kcalloc()' call, just a few line below. When memory is allocated in 'mwl8k_firmware_load_success()' GFP_KERNEL can be used because this flag is already used within 'ieee80211_register_hw()' which is called just a few line below. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201129150844.1466214-1-christophe.jaillet@wanadoo.fr
2020-12-07rtw88: pci: Add prototypes for .probe, .remove and .shutdownLee Jones
Also strip out other duplicates from driver specific headers. Ensure 'main.h' is explicitly included in 'pci.h' since the latter uses some defines from the former. It avoids issues like: from drivers/net/wireless/realtek/rtw88/rtw8822be.c:5: drivers/net/wireless/realtek/rtw88/pci.h:209:28: error: ‘RTK_MAX_TX_QUEUE_NUM’ undeclared here (not in a function); did you mean ‘RTK_MAX_RX_DESC_NUM’? 209 | DECLARE_BITMAP(tx_queued, RTK_MAX_TX_QUEUE_NUM); | ^~~~~~~~~~~~~~~~~~~~ Fixes the following W=1 kernel build warning(s): drivers/net/wireless/realtek/rtw88/pci.c:1488:5: warning: no previous prototype for ‘rtw_pci_probe’ [-Wmissing-prototypes] 1488 | int rtw_pci_probe(struct pci_dev *pdev, | ^~~~~~~~~~~~~ drivers/net/wireless/realtek/rtw88/pci.c:1568:6: warning: no previous prototype for ‘rtw_pci_remove’ [-Wmissing-prototypes] 1568 | void rtw_pci_remove(struct pci_dev *pdev) | ^~~~~~~~~~~~~~ drivers/net/wireless/realtek/rtw88/pci.c:1590:6: warning: no previous prototype for ‘rtw_pci_shutdown’ [-Wmissing-prototypes] 1590 | void rtw_pci_shutdown(struct pci_dev *pdev) | ^~~~~~~~~~~~~~~~ Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201126133152.3211309-18-lee.jones@linaro.org
2020-12-07ath9k: remove trailing semicolon in macro definitionTom Rix
The macro use will already have a semicolon. Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201127175336.2752730-1-trix@redhat.com
2020-12-07ath11k: Ignore resetting peer auth flag in peer assoc cmdSeevalamuthu Mariappan
Incase of hardware encryption, WMI_PEER_AUTH flag will be set by firmware during install key. Since install key wont be done for software encryption mode, firmware will not set this flag. Due to this, seeing traffic failure in software encryption. Hence, avoid resetting peer auth flag if hardware encryption disabled. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-01421-QCAHKSWPL_SILICONZ-1 Signed-off-by: Seevalamuthu Mariappan <seevalam@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1606369414-25211-1-git-send-email-seevalam@codeaurora.org
2020-12-07ath11k: add 64bit check before reading msi high addrAnilkumar Kolli
In QCN9074 ath11k boot, firmware crash is observed in 64-bit builds and is due to wrong 64 bit MSI address size. This patch fixes the firmware crash. Read msi high addr if 64-bit addresses allowed on MSI. Tested-On: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1.r1-00026-QCAHKSWPL_SILICONZ-2 Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1606199334-18206-1-git-send-email-akolli@codeaurora.org
2020-12-07ath10k: fix a check patch warning returnNonBoolInBooleanFunction of sdio.cWen Gong
cppcheck possible warnings: (new ones prefixed by >>, may not real problems) drivers/net/wireless/ath/ath10k/sdio.c:2234:2: warning: Non-boolean value returned from function returning bool [returnNonBoolInBooleanFunction] return param & HI_OPTION_SDIO_CRASH_DUMP_ENHANCEMENT_FW; Reported-by: kernel test robot <rong.a.chen@intel.com> Tested-on: QCA6174 hw3.2 SDIO WLAN.RMH.4.4.1-00049 Signed-off-by: Wen Gong <wgong@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1606103240-9868-1-git-send-email-wgong@codeaurora.org
2020-12-04mt76: mt7615: Fix fall-through warnings for ClangGustavo A. R. Silva
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning by replacing a /* fall through */ comment with the new pseudo-keyword macro fallthrough; instead of letting the code fall through to the next case. Notice that Clang doesn't recognize /* fall through */ comments as implicit fall-through markings. Link: https://github.com/KSPP/linux/issues/115 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: mt7915: fix ht mcs in mt7915_mcu_get_rx_rate()Shayne Chen
The mcs value of HT mode reported by mt7915_mcu_get_rx_rate() has already been converted to the expected format. Tested-by: Yiwei Chung <yiwei.chung@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04Merge tag 'wireless-drivers-next-2020-12-03' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for v5.11 First set of patches for v5.11. rtw88 getting improvements to work better with Bluetooth and other driver also getting some new features. mhi-ath11k-immutable branch was pulled from mhi tree to avoid conflicts with mhi tree. Major changes: rtw88 * major bluetooth co-existance improvements wilc1000 * Wi-Fi Multimedia (WMM) support ath11k * Fast Initial Link Setup (FILS) discovery and unsolicited broadcast probe response support * qcom,ath11k-calibration-variant Device Tree setting * cold boot calibration support * new DFS region: JP wnc36xx * enable connection monitoring and keepalive in firmware ath10k * firmware IRAM recovery feature mhi * merge mhi-ath11k-immutable branch to make MHI API change go smoothly * tag 'wireless-drivers-next-2020-12-03' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next: (180 commits) wl1251: remove trailing semicolon in macro definition airo: remove trailing semicolon in macro definition wilc1000: added queue support for WMM wilc1000: call complete() for failure in wilc_wlan_txq_add_cfg_pkt() wilc1000: free resource in wilc_wlan_txq_add_mgmt_pkt() for failure path wilc1000: free resource in wilc_wlan_txq_add_net_pkt() for failure path wilc1000: added 'ndo_set_mac_address' callback support brcmfmac: expose firmware config files through modinfo wlcore: Switch to using the new API kobj_to_dev() rtw88: coex: add feature to enhance HID coexistence performance rtw88: coex: upgrade coexistence A2DP mechanism rtw88: coex: add action for coexistence in hardware initial rtw88: coex: add function to avoid cck lock rtw88: coex: change the coexistence mechanism for WLAN connected rtw88: coex: change the coexistence mechanism for HID rtw88: coex: update AFH information while in free-run mode rtw88: coex: update the mechanism for A2DP + PAN rtw88: coex: add debug message rtw88: coex: run coexistence when WLAN entering/leaving LPS Revert "rtl8xxxu: Add Buffalo WI-U3-866D to list of supported devices" ... ==================== Link: https://lore.kernel.org/r/20201203185732.9CFA5C433ED@smtp.codeaurora.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-04mt76: attempt to free up more room when filling the tx queueFelix Fietkau
Run dma cleanup immediately if the queue is almost full, instead of waiting for the tx interrupt Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: mt7915: stop queues when running out of tx tokensFelix Fietkau
Avoids packet drops under load with lots of stations Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: improve tx queue stop/wakeFelix Fietkau
Instead of stopping and waking only a single queue, handle all phy tx queues mapped ot the same hardware queue. Also allow the driver to block tx queues Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: mt7915: fix memory leak in mt7915_mcu_get_rx_rate()Shayne Chen
Free the skb to prevent memory leak. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: mt7615: fix rdd mcu cmd endiannessLorenzo Bianconi
Similar to mt7915 driver, fix mt7615 radar mcu command endianness Fixes: 2ce73efe0f8e5 ("mt76: mt7615: initialize radar specs from host driver") Fixes: 70911d9638069 ("mt76: mt7615: add radar pattern test knob to debugfs") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: mt7915: fix endian issuesFelix Fietkau
Multiple MCU messages were using u16/u32 fields without endian annotations or conversions Fixes: e57b7901469f ("mt76: add mac80211 driver for MT7915 PCIe-based chipsets") Fixes: 5517f78b0063 ("mt76: mt7915: enable firmware module debug support") Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: mt7915: get rid of dbdc debugfs knobLorenzo Bianconi
mt7915 automatically detects dbdc feature so drop debugfs knob. Move if_comb, mt7915_rates, if_limits structs and mt7915_regd_notifier(), mt7915_init_wiphy() routines at the begging of init.c in order to make mt7915_register_ext_phy routine static Co-developed-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Co-developed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: mt7915: introduce dbdc supportLorenzo Bianconi
Introduce mt7915 dbdc support. If dbdc is available, mt7915 primary phy will work on 2.4GHz band, while secondary one on 5GHz band. Co-developed-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Co-developed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: move hw mac_addr in mt76_phyLorenzo Bianconi
This is a preliminary patch to properly support mt7915 dbdc Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: move band allocation in mt76_register_phyLorenzo Bianconi
This is a preliminary patch to introduce dbdc support to mt7915 devices Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: rely on mt76_phy in mt76_init_sband_2g and mt76_init_sband_5gLorenzo Bianconi
This is a preliminary patch to properly support mt7915 dbdc Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: move band capabilities in mt76_phyLorenzo Bianconi
This is a preliminary patch to move properly support mt7915 dbdc Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: move tx hw data queues in mt76_phyLorenzo Bianconi
Move hw data queues in mt76_phy from mt76_dev since mt7915 supports per phy hw queues in dbdc mode Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: move mcu queues to mt76_dev q_mcu arrayLorenzo Bianconi
Move mcu queue to a dedicated array q_mcu in mt76_dev structure. This is a preliminary patch to move data queues in mt76_phy and properly support dbdc Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: rely on mt76_queue in tx_queue_skb_raw signatureLorenzo Bianconi
This is a preliminary patch to move data queues in mt76_phy and properly support dbdc Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: introduce mt76_init_mcu_queue utility routineLorenzo Bianconi
Introduce mt76_init_mcu_queue utility routine in order to allocate dedicate q_mcu pointers for mcu hw queues. This is a preliminary patch to move data queues in mt76_phy and add dbdc support to mt7915 driver Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: rely on mt76_queue in tx_queue_skb signatureLorenzo Bianconi
Rely on mt76_queue instead of qid in tx_queue_skb signature. This is a preliminary patch to move data queues in mt76_phy and add dbdc support to mt7915 driver Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: dma: rely on mt76_queue in mt76_dma_tx_cleanup signatureLorenzo Bianconi
This is a preliminary patch to move data queues in mt76_phy and properly support dbdc Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: mt7663s: rely on mt76_queue in mt7663s_tx_run_queue signatureLorenzo Bianconi
This is a preliminary patch to move data queues in mt76_phy and properly support dbdc for mt7915 Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: sdio: rely on mt76_queue in mt76s_process_tx_queue signatureLorenzo Bianconi
This is a preliminary patch to move data queues in mt76_phy and properly support dbdc for mt7915 Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: sdio: introduce mt76s_alloc_tx_queueLorenzo Bianconi
This is a preliminary patch to move hw data queues in mt76_phy for mt7915 dbdc support Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: move mt76_init_tx_queue in common codeLorenzo Bianconi
Move mt76_init_tx_queue in mac80211.c since it is shared by all drivers. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: mt7915: rely on eeprom definitionsLorenzo Bianconi
In order to make the code more readable, rely on mt7915_eeprom_field definitions for eeprom parsing Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: mt7615: refactor usb/sdio rate codeLorenzo Bianconi
Since wtbl workqueue is used only for rate handling, refactor code to make it more clear Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: mt7615: support 16 interfacesRyder Lee
When looking for a MAC address slot, start by using main BSSID slots 1-3, afterwards use 16 repeater mode BSSID slots, then start using the slots usually used for AP mode. This search order should prevent unnecessary conflicts with AP mode interfaces on the same PHY. Note that two PHYs share global 32 omac slots with each other. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: mt7915: remove unused mt7915_mcu_bss_sync_tlv()Ryder Lee
mt7915_mcu_bss_sync_tlv() is no longer used, so remove it. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: mt7915: use BIT_ULL for omac_idxRyder Lee
The omac_idx variable is u64 so we should use the 64-bit BIT_ULL(). Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: mt7915: make mt7915_eeprom_read staticLorenzo Bianconi
Make mt7915_eeprom_read routine static since it is used only in eeprom.c Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: mt7915: add support to set tx frequency offset in testmodeShayne Chen
Support to set tx frequency offset in testmode, which is usally used in the pre-calibration stage. Reviewed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: mt7915: add support to set txpower in testmodeShayne Chen
Support tx_power setting in testmode. Note that the tx power value of antenna 1-3 equal to antenna 0. Reviewed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: mt7915: implement testmode rx supportShayne Chen
Support testmode rx and display rx statistic by parsing RXV packet type, which is currently only enabled in testmode. Reviewed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: mt7915: implement testmode tx supportShayne Chen
Support testmode tx for MT7915A, including tx streams and HE rate settings. Reviewed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: testmode: add support for HE rate modesShayne Chen
Extend enum mt76_testmode_tx_mode to support various HE rate modes. Reviewed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: mt7915: fix tx rate related fields in tx descriptorShayne Chen
Correct the bitfields of tx rateval and bw in tx descriptor. Reviewed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-04 13:47:55 +0000