summaryrefslogtreecommitdiff
path: root/drivers/net/wireless
AgeCommit message (Collapse)Author
2016-03-11ath9k_htc: fix up indents with spacesBob Copeland
Use tabs here. Found by smatch. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-03-11ath9k: fix a misleading indentationBob Copeland
These lines belong inside the if-statement above, not in the main body of the switch. Found by smatch. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-03-11ath5k: fix incorrect indentationBob Copeland
smatch said: drivers/net/wireless/ath/ath5k/phy.c:1449 ath5k_hw_channel() warn: inconsistent indenting drivers/net/wireless/ath/ath5k/reset.c:637 ath5k_hw_on_hold() warn: inconsistent indenting drivers/net/wireless/ath/ath5k/reset.c:702 ath5k_hw_nic_wakeup() warn: inconsistent indenting All of these lines were indented a tabstop too far. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-03-11ath9k: set correct peak detect thresholdMiaoqing Pan
Set QCA9561 peak detect threshold to 11. Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-03-11ath9k: use AR_SREV_9003_PCOEM to identify PCOEM chipsMiaoqing Pan
commit f49c90db4d23 ("ath9k: Add a macro to identify PCOEM chips") defined AR_SREV_9003_PCOEM macro, its more clear to use the macro instead of checking one by one. Also removed PCOEM chips checking in the callback of ar9003_hw_do_pcoem_manual_peak_cal() which only for PCOEM chips. Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-03-11ath9k: enable manual peak cal for all ar9300 chipsMiaoqing Pan
HW peak detect calibration would fail, enable all ar9300 chips manual peak calibration instead. Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-03-11ath9k: Update AR9580 initvalsMiaoqing Pan
HW peak detect calibration would fail for AR9300 chips and we went for implementing the SW way of doing it instead of HW doing the peak detect calibration. Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-03-11ath9k: Update QCA956x initvalsMiaoqing Pan
HW peak detect calibration would fail for AR9300 chips and we went for implementing the SW way of doing it instead of HW doing the peak detect calibration. Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-03-11ath9k: Update AR9565 initvalsMiaoqing Pan
HW peak detect calibration would fail for AR9300 chips and we went for implementing the SW way of doing it instead of HW doing the peak detect calibration. Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-03-11ath9k: Update AR955x initvalsMiaoqing Pan
HW peak detect calibration would fail for AR9300 chips and we went for implementing the SW way of doing it instead of HW doing the peak detect calibration. Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-03-11ath9k: Update AR9485 initvalsMiaoqing Pan
HW peak detect calibration would fail for AR9300 chips and we went for implementing the SW way of doing it instead of HW doing the peak detect calibration. Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-03-11ath9k: Update AR9462 initvalsMiaoqing Pan
HW peak detect calibration would fail for AR9300 chips and we went for implementing the SW way of doing it instead of HW doing the peak detect calibration. Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-03-11ath9k: Update AR9340 initvalsMiaoqing Pan
HW peak detect calibration would fail for AR9300 chips and we went for implementing the SW way of doing it instead of HW doing the peak detect calibration. Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-03-11ath9k: Update AR933x initvalsMiaoqing Pan
HW peak detect calibration would fail for AR9300 chips and we went for implementing the SW way of doing it instead of HW doing the peak detect calibration. Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-03-11ath9k: Update AR9003 2.2 initvalsMiaoqing Pan
HW peak detect calibration would fail for AR9300 chips and we went for implementing the SW way of doing it instead of HW doing the peak detect calibration. Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-03-11ath9k: Update QCA953x initvalsMiaoqing Pan
commit 14c5932805eb ("ath9k: Update QCA953x initvals") disabled HW peak detect calibartion on QCA953x 1.0, which should also be applied on 2.0. Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-03-10rtl8xxxu: Temporarily disable 8192eu device initJes Sorensen
To reduce the patch volume, temporariliy disable 8192eu device init. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-03-10rtl8xxxu: Use correct 8051 reset function for 8723b partsJes Sorensen
8723b needs more action, so implement support for device specific reset functions. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-03-10rtl8xxxu: Print a warning if flushing the FIFO failsJes Sorensen
Only print a warning if the FIFO flush fails, as opposed to printing the status unconditionally. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-03-10rtl8xxxu: Flush FIFO before powering down devicesJes Sorensen
This should help when reloading the driver for 8723bu devices Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-03-10rtl8xxxu: Implement device specific power_off functionJes Sorensen
Implment 8723bu specific device power down, and make power_off() a fileops function. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-03-10rtl8xxxu: Implement 8723bu specific disable_rf() functionJes Sorensen
Powering up the 8723bu RF should probably be matched by the ability to power it down again. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-03-10rtl8xxxu: Use define for REG_PWR_DATA bitsJes Sorensen
Use the bit define rather than hard code the value for REG_PWR_DATA bits. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-03-10rtl8xxxu: convert rtl8723bu_init_bt() into rtl8723b_enable_rf()Jes Sorensen
rtl8723bu_init_bt() is effectively the function enabling RF, so name it appropriately. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-03-10rtl8xxxu: Remove unncessary semicolonJes Sorensen
This removes an superfluous semicolon. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-03-10rtl8xxxu: Pass RX rate to rx_parse_phystats and enable phystats for rtl8723buJes Sorensen
rtl8xxxu_rx_parse_phystats() only needs the RX rate to determine whether to handle the stats as CCK or not. Parsing in the rate rather than the rx descriptor elimantes the need to handle multiple rx descriptor formats in the function. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-03-10rtl8xxxu: Process C2H RA_REPORT events for 8723buJes Sorensen
Handle RA_REPORTS events for 8723bu to not have them show up as unhandled. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-03-10rtl8xxxu: Dump contents of unhandled C2H eventsJes Sorensen
Dump the contents of unhandled C2H events. We should be handling all expected events, so this is debugging help in case an unexpected event happens. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-03-10rtl8xxxu: Report media status using the correct H2C command for 8723buJes Sorensen
Implement support for nextgen devices reporting connectition to the firmware. The H2C API for reporting connection to the firmware is different between the two device generations. Use the fileops structure to determine which one to call. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-03-10rtl8xxxu: Implement basic 8723b specific update_rate_mask() functionJes Sorensen
Support for setting bandwidth and VHT parameters is still missing Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-03-10rtl8xxxu: Define 8723b H2C ramask command structureJes Sorensen
Define H2C command structure for setting the rate mask. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-03-10rtl8xxxu: Do not parse RX descriptor info for C2H packetsJes Sorensen
C2H events are delivered as RX packets on 8723bu/8192eu. When receiving a C2H event, do not parse the rest of the RX descriptor as the info isn't valid. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-03-10rtl8xxxu: Improve handling of txdesc32 vs txdesc40 handlingJes Sorensen
Further correct the handling of 40 byte TX descriptors. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-03-10rtl8xxxu: TX RTS rate is word 4 for 8723aJes Sorensen
Correct the setting of TX RTS for 8723a generation chips. In addition update documentation to match that this is part of data word 4, note data word 5. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-03-10rtl8723au: Update TX descriptor words 4 and 5 definitionsJes Sorensen
TX data words 4 and 5 differ significantly between 32 byte and 40 byte descriptors. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-03-10rtl8xxxu: Set sequence number correctly for 40 byte TX descriptorsJes Sorensen
SEQ changed location in the 40 byte TX descriptor. Set it correctly. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-03-10rtl8xxxu: Set the correct TX descriptor bits for agg and break on 8723bJes Sorensen
Fixup victim of the relocated bits for AGG_ENABLE/AGG_BREAK in the 40 byte TX descriptor Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-03-10rtl8xxxu: Add more 40 byte TX desc bit definitionsJes Sorensen
Add additional bit definitions for 40 byte TX descriptors, and rename bits for 32 byte descriptors that are located differently in the 40 byte descriptor format. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-03-10rtl8xxxu: Add additional tx descriptor bits for data word 0Jes Sorensen
This adds documentation for some additional bits in TX descriptor word 0. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-03-10rtl8xxxu: Do not unconditionally print debug info in rtl8723bu_handle_c2h()Jes Sorensen
Reduce the log level in rtl8723bu_handle_c2h() Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-03-10rtl8xxxu: Handle 40 byte TX descriptors for rtl8723buJes Sorensen
Note the descriptor checksum is still only calculated over the initial 32 bytes of the descriptor, ignoring the last 8 bytes of the descriptor. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-03-10rtl8xxxu: Add definition for 8723bu tx descriptorJes Sorensen
Newer generation chips use a 40 byte TX descriptor, compared to the 32 byte descriptor used on older chips. This adds the definition for the 40 byte descriptor. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-03-10rtl8xxxu: Set the correct thermal meter register for 8723buJes Sorensen
Older chips use RF register 0x24 to set the thermal meter. Newer chips use register 0x42. This change makes sure to set the correct thermal meter register depending on the chip. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-03-10rtl8xxxu: Set 8723bu MCS TX powerJes Sorensen
This adds the missing support for setting MCS TX power rates on 8723bu. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-03-10rtl8xxxu: Set 8723bu TX power for CCK and OFDM ratesJes Sorensen
This implements support for setting TX power for CCK and OFDM rates on 8723bu. MCS rates is still pending. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-03-10rtl8xxxu: Parse efuse power indices for 8723buJes Sorensen
This should (hopefully) parse the power indices correctly for the 8723bu. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-03-10rtl8xxxu: Bump TX power arrays to handle larger channel groupsJes Sorensen
Newer generation chips have more channels groups. In order to carry the larger arrays in common structures, bump the array sizes to match. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-03-10rtl8xxxu: Use size of source pointer when copying efuse dataJes Sorensen
Some newer chips have more channel groups in their efuse parameter tables, so use the size of the source, rather than the destination when copying them out. This avoids copying garbage when increasing the common array sizes. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-03-10rtl8xxxu: Introduce set_tx_power() fileop and a new 8723b dummy derivativeJes Sorensen
The 8723b series is significantly different from the older generation in this sense. So far the 8723b version doesn't do anything useful. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-03-10rtl8xxxu: Correct struct rtl8723bu_efuse to list power bases correctlyJes Sorensen
Correct TX power definitions in rtl8723bu_efuse Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-05 15:29:08 +0000