summaryrefslogtreecommitdiff
path: root/drivers/net/wireless
AgeCommit message (Collapse)Author
2024-09-18wifi: mt76: mt7921: fix NULL pointer access in mt7921_ipv6_addr_changeBert Karwatzki
[ Upstream commit 479ffee68d59c599f8aed8fa2dcc8e13e7bd13c3 ] When disabling wifi mt7921_ipv6_addr_change() is called as a notifier. At this point mvif->phy is already NULL so we cannot use it here. Signed-off-by: Bert Karwatzki <spasswolf@web.de> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20240812104542.80760-1-spasswolf@web.de Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-12wifi: mwifiex: Do not return unused priv in mwifiex_get_priv_by_id()Sascha Hauer
[ Upstream commit c145eea2f75ff7949392aebecf7ef0a81c1f6c14 ] mwifiex_get_priv_by_id() returns the priv pointer corresponding to the bss_num and bss_type, but without checking if the priv is actually currently in use. Unused priv pointers do not have a wiphy attached to them which can lead to NULL pointer dereferences further down the callstack. Fix this by returning only used priv pointers which have priv->bss_mode set to something else than NL80211_IFTYPE_UNSPECIFIED. Said NULL pointer dereference happened when an Accesspoint was started with wpa_supplicant -i mlan0 with this config: network={ ssid="somessid" mode=2 frequency=2412 key_mgmt=WPA-PSK WPA-PSK-SHA256 proto=RSN group=CCMP pairwise=CCMP psk="12345678" } When waiting for the AP to be established, interrupting wpa_supplicant with <ctrl-c> and starting it again this happens: | Unable to handle kernel NULL pointer dereference at virtual address 0000000000000140 | Mem abort info: | ESR = 0x0000000096000004 | EC = 0x25: DABT (current EL), IL = 32 bits | SET = 0, FnV = 0 | EA = 0, S1PTW = 0 | FSC = 0x04: level 0 translation fault | Data abort info: | ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 | CM = 0, WnR = 0, TnD = 0, TagAccess = 0 | GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 | user pgtable: 4k pages, 48-bit VAs, pgdp=0000000046d96000 | [0000000000000140] pgd=0000000000000000, p4d=0000000000000000 | Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP | Modules linked in: caam_jr caamhash_desc spidev caamalg_desc crypto_engine authenc libdes mwifiex_sdio +mwifiex crct10dif_ce cdc_acm onboard_usb_hub fsl_imx8_ddr_perf imx8m_ddrc rtc_ds1307 lm75 rtc_snvs +imx_sdma caam imx8mm_thermal spi_imx error imx_cpufreq_dt fuse ip_tables x_tables ipv6 | CPU: 0 PID: 8 Comm: kworker/0:1 Not tainted 6.9.0-00007-g937242013fce-dirty #18 | Hardware name: somemachine (DT) | Workqueue: events sdio_irq_work | pstate: 00000005 (nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) | pc : mwifiex_get_cfp+0xd8/0x15c [mwifiex] | lr : mwifiex_get_cfp+0x34/0x15c [mwifiex] | sp : ffff8000818b3a70 | x29: ffff8000818b3a70 x28: ffff000006bfd8a5 x27: 0000000000000004 | x26: 000000000000002c x25: 0000000000001511 x24: 0000000002e86bc9 | x23: ffff000006bfd996 x22: 0000000000000004 x21: ffff000007bec000 | x20: 000000000000002c x19: 0000000000000000 x18: 0000000000000000 | x17: 000000040044ffff x16: 00500072b5503510 x15: ccc283740681e517 | x14: 0201000101006d15 x13: 0000000002e8ff43 x12: 002c01000000ffb1 | x11: 0100000000000000 x10: 02e8ff43002c0100 x9 : 0000ffb100100157 | x8 : ffff000003d20000 x7 : 00000000000002f1 x6 : 00000000ffffe124 | x5 : 0000000000000001 x4 : 0000000000000003 x3 : 0000000000000000 | x2 : 0000000000000000 x1 : 0001000000011001 x0 : 0000000000000000 | Call trace: | mwifiex_get_cfp+0xd8/0x15c [mwifiex] | mwifiex_parse_single_response_buf+0x1d0/0x504 [mwifiex] | mwifiex_handle_event_ext_scan_report+0x19c/0x2f8 [mwifiex] | mwifiex_process_sta_event+0x298/0xf0c [mwifiex] | mwifiex_process_event+0x110/0x238 [mwifiex] | mwifiex_main_process+0x428/0xa44 [mwifiex] | mwifiex_sdio_interrupt+0x64/0x12c [mwifiex_sdio] | process_sdio_pending_irqs+0x64/0x1b8 | sdio_irq_work+0x4c/0x7c | process_one_work+0x148/0x2a0 | worker_thread+0x2fc/0x40c | kthread+0x110/0x114 | ret_from_fork+0x10/0x20 | Code: a94153f3 a8c37bfd d50323bf d65f03c0 (f940a000) | ---[ end trace 0000000000000000 ]--- Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20240703072409.556618-1-s.hauer@pengutronix.de Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-12wifi: rtw88: usb: schedule rx work after everything is set upMarcin Ślusarz
[ Upstream commit adc539784c98a7cc602cbf557debfc2e7b9be8b3 ] Right now it's possible to hit NULL pointer dereference in rtw_rx_fill_rx_status on hw object and/or its fields because initialization routine can start getting USB replies before rtw_dev is fully setup. The stack trace looks like this: rtw_rx_fill_rx_status rtw8821c_query_rx_desc rtw_usb_rx_handler ... queue_work rtw_usb_read_port_complete ... usb_submit_urb rtw_usb_rx_resubmit rtw_usb_init_rx rtw_usb_probe So while we do the async stuff rtw_usb_probe continues and calls rtw_register_hw, which does all kinds of initialization (e.g. via ieee80211_register_hw) that rtw_rx_fill_rx_status relies on. Fix this by moving the first usb_submit_urb after everything is set up. For me, this bug manifested as: [ 8.893177] rtw_8821cu 1-1:1.2: band wrong, packet dropped [ 8.910904] rtw_8821cu 1-1:1.2: hw->conf.chandef.chan NULL in rtw_rx_fill_rx_status because I'm using Larry's backport of rtw88 driver with the NULL checks in rtw_rx_fill_rx_status. Link: https://lore.kernel.org/linux-wireless/CA+shoWQ7P49jhQasofDcTdQhiuarPTjYEDa--NiVVx494WcuQw@mail.gmail.com/ Signed-off-by: Marcin Ślusarz <mslusarz@renau.com> Cc: Tim K <tpkuester@gmail.com> Cc: Ping-Ke Shih <pkshih@realtek.com> Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: Kalle Valo <kvalo@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20240528110246.477321-1-marcin.slusarz@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-12wifi: brcmsmac: advertise MFP_CAPABLE to enable WPA3Arend van Spriel
[ Upstream commit dbb5265a5d7cca1cdba7736dba313ab7d07bc19d ] After being asked about support for WPA3 for BCM43224 chipset it was found that all it takes is setting the MFP_CAPABLE flag and mac80211 will take care of all that is needed [1]. Link: https://lore.kernel.org/linux-wireless/20200526155909.5807-2-Larry.Finger@lwfinger.net/ [1] Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Tested-by: Reijer Boekhoff <reijerboekhoff@protonmail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20240617122609.349582-1-arend.vanspriel@broadcom.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-12wifi: iwlwifi: mvm: use IWL_FW_CHECK for link ID checkJohannes Berg
[ Upstream commit 9215152677d4b321801a92b06f6d5248b2b4465f ] The lookup function iwl_mvm_rcu_fw_link_id_to_link_conf() is normally called with input from the firmware, so it should use IWL_FW_CHECK() instead of WARN_ON(). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240625194805.4ea8fb7c47d4.I1c22af213f97f69bfc14674502511c1bc504adfb@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-12wifi: ath12k: fix firmware crash due to invalid peer nssAjith C
[ Upstream commit db163a463bb93cd3e37e1e7b10b9726fb6f95857 ] Currently, if the access point receives an association request containing an Extended HE Capabilities Information Element with an invalid MCS-NSS, it triggers a firmware crash. This issue arises when EHT-PHY capabilities shows support for a bandwidth and MCS-NSS set for that particular bandwidth is filled by zeros and due to this, driver obtains peer_nss as 0 and sending this value to firmware causes crash. Address this issue by implementing a validation step for the peer_nss value before passing it to the firmware. If the value is greater than zero, proceed with forwarding it to the firmware. However, if the value is invalid, reject the association request to prevent potential firmware crashes. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Ajith C <quic_ajithc@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20240613053528.2541645-1-quic_ajithc@quicinc.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-12wifi: ath12k: fix uninitialize symbol error on ath12k_peer_assoc_h_he()Aaradhana Sahu
[ Upstream commit 19b77e7c656a3e125319cc3ef347b397cf042bf6 ] Smatch throws following errors drivers/net/wireless/ath/ath12k/mac.c:1922 ath12k_peer_assoc_h_he() error: uninitialized symbol 'rx_mcs_80'. drivers/net/wireless/ath/ath12k/mac.c:1922 ath12k_peer_assoc_h_he() error: uninitialized symbol 'rx_mcs_160'. drivers/net/wireless/ath/ath12k/mac.c:1924 ath12k_peer_assoc_h_he() error: uninitialized symbol 'rx_mcs_80'. In ath12k_peer_assoc_h_he() rx_mcs_80 and rx_mcs_160 variables remain uninitialized in the following conditions: 1. Whenever the value of mcs_80 become equal to IEEE80211_HE_MCS_NOT_SUPPORTED then rx_mcs_80 remains uninitialized. 2. Whenever phy capability is not supported 160 channel width and value of mcs_160 become equal to IEEE80211_HE_MCS_NOT_SUPPORTED then rx_mcs_160 remains uninitialized. Initialize these variables during declaration. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00188-QCAHKSWPL_SILICONZ-1 Signed-off-by: Aaradhana Sahu <quic_aarasahu@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20240611031017.297927-3-quic_aarasahu@quicinc.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-08wifi: iwlwifi: remove fw_running opShahar S Matityahu
[ Upstream commit 37733bffda3285d18bd1d72c14b3a1cf39c56a5e ] fw_running assumes that memory can be retrieved only after alive. This assumption is no longer true as we support dump before alive. To avoid invalid access to the NIC, check that STATUS_DEVICE_ENABLED bit in trans status is set before dumping instead of the prior check. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Reviewed-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240510170500.ca07138cedeb.I090e31d3eaeb4ba19f5f84aba997ccd36927e9ac@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-08wifi: rtw89: ser: avoid multiple deinit on same CAMZong-Zhe Yang
[ Upstream commit cea4066588308fa932b6b03486c608efff1d761c ] We did deinit CAM in STA iteration in VIF loop. But, the STA iteration missed to restrict the target VIF. So, if there are multiple VIFs, we would deinit a CAM multiple times. Now, fix it. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://msgid.link/20240509090646.35304-2-pkshih@realtek.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-08wifi: ath11k: initialize 'ret' in ath11k_qmi_load_file_target_mem()Jeff Johnson
[ Upstream commit 199f149e97dc7be80e5eed4b232529c1d1aa8055 ] smatch flagged the following issue: drivers/net/wireless/ath/ath11k/qmi.c:2401 ath11k_qmi_load_file_target_mem() error: uninitialized symbol 'ret'. The reality is that 'ret' is initialized in every path through ath11k_qmi_load_file_target_mem() except one, the case where the input 'len' is 0, and hence the "while (remaining)" loop is never entered. But to make sure this case is also handled, add an initializer to the declaration of 'ret'. No functional changes, compile tested only. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240504-qmi_load_file_target_mem-v1-2-069fc44c45eb@quicinc.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-08wifi: ath12k: initialize 'ret' in ath12k_qmi_load_file_target_mem()Jeff Johnson
[ Upstream commit bb0b0a6b96e6de854cb1e349e17bd0e8bf421a59 ] smatch flagged the following issue: drivers/net/wireless/ath/ath12k/qmi.c:2619 ath12k_qmi_load_file_target_mem() error: uninitialized symbol 'ret'. The reality is that 'ret' is initialized in every path through ath12k_qmi_load_file_target_mem() except one, the case where the input 'len' is 0, and hence the "while (remaining)" loop is never entered. But to make sure this case is also handled, add an initializer to the declaration of 'ret'. No functional changes, compile tested only. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240504-qmi_load_file_target_mem-v1-1-069fc44c45eb@quicinc.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-04wifi: iwlwifi: fw: fix wgds rev 3 exact sizeAnjaneyulu
[ Upstream commit 3ee22f07a35b76939c5b8d17d6af292f5fafb509 ] Check size of WGDS revision 3 is equal to 8 entries size with some header, but doesn't depend on the number of used entries. Check that used entries are between min and max but allow more to be present than are used to fix operation with some BIOSes that have such data. Fixes: 97f8a3d1610b ("iwlwifi: ACPI: support revision 3 WGDS tables") Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240825191257.cc71dfc67ec3.Ic27ee15ac6128b275c210b6de88f2145bd83ca7b@changeid [edit commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-04wifi: mwifiex: duplicate static structs used in driver instancesSascha Hauer
commit 27ec3c57fcadb43c79ed05b2ea31bc18c72d798a upstream. mwifiex_band_2ghz and mwifiex_band_5ghz are statically allocated, but used and modified in driver instances. Duplicate them before using them in driver instances so that different driver instances do not influence each other. This was observed on a board which has one PCIe and one SDIO mwifiex adapter. It blew up in mwifiex_setup_ht_caps(). This was called with the statically allocated struct which is modified in this function. Cc: stable@vger.kernel.org Fixes: d6bffe8bb520 ("mwifiex: support for creation of AP interface") Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20240809-mwifiex-duplicate-static-structs-v1-1-6837b903b1a4@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-04wifi: wfx: repair open network AP modeAlexander Sverdlin
commit 6d30bb88f623526197c0e18a366e68a4254a2c83 upstream. RSN IE missing in beacon is normal in open networks. Avoid returning -EINVAL in this case. Steps to reproduce: $ cat /etc/wpa_supplicant.conf network={ ssid="testNet" mode=2 key_mgmt=NONE } $ wpa_supplicant -iwlan0 -c /etc/wpa_supplicant.conf nl80211: Beacon set failed: -22 (Invalid argument) Failed to set beacon parameters Interface initialization failed wlan0: interface state UNINITIALIZED->DISABLED wlan0: AP-DISABLED wlan0: Unable to setup interface. Failed to initialize AP interface After the change: $ wpa_supplicant -iwlan0 -c /etc/wpa_supplicant.conf Successfully initialized wpa_supplicant wlan0: interface state UNINITIALIZED->ENABLED wlan0: AP-ENABLED Cc: stable@vger.kernel.org Fixes: fe0a7776d4d1 ("wifi: wfx: fix possible NULL pointer dereference in wfx_set_mfp_ap()") Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com> Reviewed-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20240823131521.3309073-1-alexander.sverdlin@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-29wifi: iwlwifi: mvm: avoid garbage iPNShaul Triebitz
[ Upstream commit 0c1c91604f3e3fc41f4d77dcfc3753860a9a32c9 ] After waking from D3, we set the iPN given by the firmware. For some reason, CIPHER_SUITE_AES_CMAC was missed. That caused copying garbage to the iPN - causing false replays. (since 'seq' is on the stack, and the iPN from the firmware was not copied into it, it contains garbage which later is copied to the iPN key). Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240205211151.2be5b35be30f.I99db8700d01092d22a6d76f1fc1bd5916c9df784@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-08-29wifi: ath12k: Add missing qmi_txn_cancel() callsJeff Johnson
[ Upstream commit 2e82b5f09a97f1b98b885470c81c1248bec103af ] Per the QMI documentation "A client calling qmi_txn_init() must call either qmi_txn_wait() or qmi_txn_cancel() to free up the allocated resources." Unfortunately, in most of the ath12k messaging functions, when qmi_send_request() fails, the function returns without performing the necessary cleanup. So update those functions to call qmi_txn_cancel() when qmi_send_request() fails. No functional changes, compile tested only. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240111-qmi-cleanup-v2-2-53343af953d5@quicinc.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-08-29wifi: iwlwifi: check for kmemdup() return value in iwl_parse_tlv_firmware()Dmitry Antipov
[ Upstream commit 3c8aaaa7557b1e33e6ef95a27a5d8a139dcd0874 ] In 'iwl_parse_tlv_firmware()', check for 'kmemdup()' return value when handling IWL_UCODE_TLV_CURRENT_PC and set the number of parsed entries only if an allocation was successful (just like it does with handling IWL_UCODE_TLV_CMD_VERSIONS above). Compile tested only. Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Acked-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20231009170453.149905-1-dmantipov@yandex.ru Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-08-29wifi: iwlwifi: fw: Fix debugfs command sendingMukesh Sisodiya
[ Upstream commit 048449fc666d736a1a17d950fde0b5c5c8fd10cc ] During debugfs command handling transport function is used directly, this bypasses the locking used by runtime operation function and leads to a kernel warning when two commands are sent in parallel. Fix it by using runtime operations function when sending debugfs command. Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20231004123422.4f80ac90658a.Ia1dfa1195c919f3002fe08db3eefbd2bfa921bbf@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-08-29wifi: iwlwifi: abort scan when rfkill on but device enabledMiri Korenblit
[ Upstream commit 3c6a0b1f0add72e7f522bc9145222b86d0a7712a ] In RFKILL we first set the RFKILL bit, then we abort scan (if one exists) by waiting for the notification from FW and notifying mac80211. And then we stop the device. But in case we have a scan ongoing in the period of time between rfkill on and before the device is stopped - we will not wait for the FW notification because of the iwl_mvm_is_radio_killed() condition, and then the scan_status and uid_status are misconfigured, (scan_status is cleared but uid_status not) and when the notification suddenly arrives (before stopping the device) we will get into the assert about scan_status and uid_status mismatch. Fix this by waiting for FW notif when rfkill is on but the device isn't disabled yet. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20231004123422.c43b69aa2c77.Icc7b5efb47974d6f499156ff7510b786e177993b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-08-29wifi: mt76: fix race condition related to checking tx queue fill statusFelix Fietkau
[ Upstream commit 0335c034e7265d36d956e806f33202c94a8a9860 ] When drv_tx calls race against local tx scheduling, the queue fill status checks can potentially race, leading to dma queue entries being overwritten. Fix this by deferring packets from drv_tx calls to the tx worker, in order to ensure that all regular queue tx comes from the same context. Reported-by: Ryder Lee <Ryder.Lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-08-29wifi: ath11k: fix ath11k_mac_op_remain_on_channel() stack usageDmitry Antipov
[ Upstream commit 4fd15bb705d3faa7e6adab2daba2e3af80d9b6bd ] When compiling with clang 16.0.6, I've noticed the following: drivers/net/wireless/ath/ath11k/mac.c:8903:12: warning: stack frame size (1032) exceeds limit (1024) in 'ath11k_mac_op_remain_on_channel' [-Wframe-larger-than] static int ath11k_mac_op_remain_on_channel(struct ieee80211_hw *hw, ^ 68/1032 (6.59%) spills, 964/1032 (93.41%) variables So switch to kzalloc()'ed instance of 'struct scan_req_params' like it's done in 'ath11k_mac_op_hw_scan()'. Compile tested only. Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230926042906.13725-1-dmantipov@yandex.ru Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-08-29wifi: ath12k: fix WARN_ON during ath12k_mac_update_vif_chanManish Dharanenthiran
[ Upstream commit 8b8b990fe495e9be057249e1651b59b5ebacf2ef ] Fix WARN_ON() from ath12k_mac_update_vif_chan() if vdev is not up. Since change_chanctx can be called even before vdev_up. Do vdev stop followed by a vdev start in case of vdev is down. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0-02903-QCAHKSWPL_SILICONZ-1 Signed-off-by: Manish Dharanenthiran <quic_mdharane@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230802085852.19821-2-quic_mdharane@quicinc.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-08-29wifi: cw1200: Avoid processing an invalid TIM IEJeff Johnson
[ Upstream commit b7bcea9c27b3d87b54075735c870500123582145 ] While converting struct ieee80211_tim_ie::virtual_map to be a flexible array it was observed that the TIM IE processing in cw1200_rx_cb() could potentially process a malformed IE in a manner that could result in a buffer over-read. Add logic to verify that the TIM IE length is large enough to hold a valid TIM payload before processing it. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230831-ieee80211_tim_ie-v3-1-e10ff584ab5d@quicinc.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-08-29wifi: iwlwifi: mvm: fix recovery flow in CSAEmmanuel Grumbach
[ Upstream commit 828c79d9feb000acbd9c15bd1ed7e0914473b363 ] If the firmware crashes in the de-activation / re-activation of the link during CSA, we will not have a valid phy_ctxt pointer in mvmvif. This is a legit case, but when mac80211 removes the station to cleanup our state during the re-configuration, we need to make sure we clear ap_sta otherwise we won't re-add the station after the firmware has been restarted. Later on, we'd activate the link, try to send a TLC command crash again on ASSERT 3508. Fix this by properly cleaning up our state. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230913145231.2651e6f6a55a.I4cd50e88ee5c23c1c8dd5b157a800e4b4c96f236@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-08-29wifi: brcmfmac: cfg80211: Handle SSID based pmksa deletionJanne Grunau
commit 2ad4e1ada8eebafa2d75a4b75eeeca882de6ada1 upstream. wpa_supplicant 2.11 sends since 1efdba5fdc2c ("Handle PMKSA flush in the driver for SAE/OWE offload cases") SSID based PMKSA del commands. brcmfmac is not prepared and tries to dereference the NULL bssid and pmkid pointers in cfg80211_pmksa. PMKID_V3 operations support SSID based updates so copy the SSID. Fixes: a96202acaea4 ("wifi: brcmfmac: cfg80211: Add support for PMKID_V3 operations") Cc: stable@vger.kernel.org # 6.4.x Signed-off-by: Janne Grunau <j@jannau.net> Reviewed-by: Neal Gompa <neal@gompa.dev> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20240803-brcmfmac_pmksa_del_ssid-v1-1-4e85f19135e1@jannau.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-14wifi: ath12k: fix memory leak in ath12k_dp_rx_peer_frag_setup()Baochen Qiang
[ Upstream commit 3d60041543189438cd1b03a1fa40ff6681c77970 ] Currently the resource allocated by crypto_alloc_shash() is not freed in case ath12k_peer_find() fails, resulting in memory leak. Add crypto_free_shash() to fix it. This is found during code review, compile tested only. Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240526124226.24661-1-quic_bqiang@quicinc.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-08-14wifi: ath12k: fix soft lockup on suspendJohan Hovold
[ Upstream commit a47f3320bb4ba6714abe8dddb36399367b491358 ] The ext interrupts are enabled when the firmware has been started, but this may never happen, for example, if the board configuration file is missing. When the system is later suspended, the driver unconditionally tries to disable interrupts, which results in an irq disable imbalance and causes the driver to spin indefinitely in napi_synchronize(). Make sure that the interrupts have been enabled before attempting to disable them. Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices") Cc: stable@vger.kernel.org # 6.3 Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://patch.msgid.link/20240709073132.9168-1-johan+linaro@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-08-14wifi: ath12k: add CE and ext IRQ flag to indicate irq_handlerKang Yang
[ Upstream commit 604308a34487eaa382c50fcdb4396c435030b4fa ] Add two flags to indicate whether IRQ handler for CE and DP can be called. This is because in one MSI vector case, interrupt is not disabled in hif_stop and hif_irq_disable. So if interrupt is disabled, MHI interrupt is disabled too. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by: Kang Yang <quic_kangyang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20231121021304.12966-3-quic_kangyang@quicinc.com Stable-dep-of: a47f3320bb4b ("wifi: ath12k: fix soft lockup on suspend") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-08-14wifi: ath12k: rename the sc naming convention to abKarthikeyan Periyasamy
[ Upstream commit cda8607e824b8f4f1e5f26fef17736c8be4358f8 ] In PCI and HAL interface layer module, the identifier sc is used to represent an instance of ath12k_base structure. However, within ath12k, the convention is to use "ab" to represent an SoC "base" struct. So change the all instances of sc to ab. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00125-QCAHKSWPL_SILICONZ-1 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20231018153008.29820-3-quic_periyasa@quicinc.com Stable-dep-of: a47f3320bb4b ("wifi: ath12k: fix soft lockup on suspend") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-08-03wifi: rtw88: usb: Fix disconnection after beacon lossBitterblue Smith
commit 28818b4d871bc93cc4f5c7c7d7c526a6a096c09c upstream. When there is beacon loss, for example due to unrelated Bluetooth devices transmitting music nearby, the wifi connection dies soon after the first beacon loss message: Apr 28 20:47:14 ideapad2 wpa_supplicant[1161]: wlp3s0f3u4: CTRL-EVENT-BEACON-LOSS Apr 28 20:47:15 ideapad2 wpa_supplicant[1161]: wlp3s0f3u4: CTRL-EVENT-DISCONNECTED bssid=... reason=4 locally_generated=1 Apr 28 20:47:24 ideapad2 wpa_supplicant[1161]: wlp3s0f3u4: CTRL-EVENT-BEACON-LOSS Apr 28 20:47:25 ideapad2 wpa_supplicant[1161]: wlp3s0f3u4: CTRL-EVENT-DISCONNECTED bssid=... reason=4 locally_generated=1 Apr 28 20:47:34 ideapad2 wpa_supplicant[1161]: wlp3s0f3u4: CTRL-EVENT-BEACON-LOSS Apr 28 20:47:35 ideapad2 wpa_supplicant[1161]: wlp3s0f3u4: CTRL-EVENT-DISCONNECTED bssid=... reason=4 locally_generated=1 When the beacon loss happens, mac80211 makes rtw88 transmit a QOS NULL frame and asks to confirm the ACK status. Even though rtw88 confirms to mac80211 that the QOS NULL was transmitted successfully, the connection still dies. This is because rtw88 is handing the QOS NULL back to mac80211 with skb->data pointing to the headroom (the TX descriptor) instead of ieee80211_hdr. Fix the disconnection by moving skb->data to the correct position before ieee80211_tx_status_irqsafe(). The problem was observed with RTL8811AU (TP-Link Archer T2U Nano) and the potential future rtw88_8821au driver. Also tested with RTL8811CU (Tenda U9). Cc: stable@vger.kernel.org Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://msgid.link/ecbf0601-810d-4609-b8fc-8b0e38d2948d@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-03wifi: mwifiex: Fix interface type changeRafael Beims
commit a17b9f590f6ec2b9f1b12b1db3bf1d181de6b272 upstream. When changing the interface type we also need to update the bss_num, the driver private data is searched based on a unique (bss_type, bss_num) tuple, therefore every time bss_type changes, bss_num must also change. This fixes for example an issue in which, after the mode changed, a wireless scan on the changed interface would not finish, leading to repeated -EBUSY messages to userspace when other scan requests were sent. Fixes: c606008b7062 ("mwifiex: Properly initialize private structure on interface type changes") Cc: stable@vger.kernel.org Signed-off-by: Rafael Beims <rafael.beims@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240510110458.15475-1-francesco@dolcini.it Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-03wifi: virt_wifi: don't use strlen() in const contextJohannes Berg
[ Upstream commit 6e909f489191b365364e9d636dec33b5dfd4e5eb ] Looks like not all compilers allow strlen(constant) as a constant, so don't do that. Instead, revert back to defining the length as the first submission had it. Fixes: b5d14b0c6716 ("wifi: virt_wifi: avoid reporting connection success with wrong SSID") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202407090934.NnR1TUbW-lkp@intel.com/ Closes: https://lore.kernel.org/oe-kbuild-all/202407090944.mpwLHGt9-lkp@intel.com/ Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-08-03wifi: virt_wifi: avoid reporting connection success with wrong SSIDEn-Wei Wu
[ Upstream commit b5d14b0c6716fad7f0c94ac6e1d6f60a49f985c7 ] When user issues a connection with a different SSID than the one virt_wifi has advertised, the __cfg80211_connect_result() will trigger the warning: WARN_ON(bss_not_found). The issue is because the connection code in virt_wifi does not check the SSID from user space (it only checks the BSSID), and virt_wifi will call cfg80211_connect_result() with WLAN_STATUS_SUCCESS even if the SSID is different from the one virt_wifi has advertised. Eventually cfg80211 won't be able to find the cfg80211_bss and generate the warning. Fixed it by checking the SSID (from user space) in the connection code. Fixes: c7cdba31ed8b ("mac80211-next: rtnetlink wifi simulation device") Reported-by: syzbot+d6eb9cee2885ec06f5e3@syzkaller.appspotmail.com Signed-off-by: En-Wei Wu <en-wei.wu@canonical.com> Link: https://patch.msgid.link/20240705023756.10954-1-en-wei.wu@canonical.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-08-03wifi: rtw89: Fix array index mistake in rtw89_sta_info_get_iter()Aleksandr Mishin
[ Upstream commit 85099c7ce4f9e64c66aa397cd9a37473637ab891 ] In rtw89_sta_info_get_iter() 'status->he_gi' is compared to array size. But then 'rate->he_gi' is used as array index instead of 'status->he_gi'. This can lead to go beyond array boundaries in case of 'rate->he_gi' is not equal to 'status->he_gi' and is bigger than array size. Looks like "copy-paste" mistake. Fix this mistake by replacing 'rate->he_gi' with 'status->he_gi'. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: e3ec7017f6a2 ("rtw89: add Realtek 802.11ax driver") Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20240703210510.11089-1-amishin@t-argos.ru Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-08-03wifi: rtl8xxxu: 8188f: Limit TX power indexMartin Kaistra
[ Upstream commit d0b4b8ef083ca46d5d318e66a30fb80e0abbb90d ] TX power index is read from the efuse on init, the values get written to the TX power registers when the channel gets switched. When the chip has not yet been calibrated, the efuse values are 0xFF, which on some boards leads to USB timeouts for reading/writing registers after the first frames have been sent. The vendor driver (v5.11.5-1) checks for these invalid values and sets default values instead. Implement something similar in rtl8188fu_parse_efuse(). Fixes: c888183b21f3 ("wifi: rtl8xxxu: Support new chip RTL8188FU") Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20240624140037.231657-1-martin.kaistra@linutronix.de Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-08-03wifi: rtw89: 8852b: fix definition of KIP register numberKuan-Chung Chen
[ Upstream commit 2f35712ab82683554c660bc2456f05785835efbe ] An incorrect definition caused DPK to fail to backup and restore a set of KIP registers. Fixing this will improve RX throughput from 902 to 997 Mbps. Fixes: 5b8471ace5b1 ("wifi: rtw89: 8852b: rfk: add DPK") Signed-off-by: Kuan-Chung Chen <damon.chen@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20240621123617.6687-2-pkshih@realtek.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-08-03wifi: ath11k: fix wrong handling of CCMP256 and GCMP ciphersBaochen Qiang
[ Upstream commit d2b0ca38d362ebf16ca79cd7f309d5bb8b581deb ] Currently for CCMP256, GCMP128 and GCMP256 ciphers, in ath11k_install_key() IEEE80211_KEY_FLAG_GENERATE_IV_MGMT is not set. And in ath11k_mac_mgmt_tx_wmi() a length of IEEE80211_CCMP_MIC_LEN is reserved for all ciphers. This results in unexpected management frame drop in case either of above 3 ciphers is used. The reason is, without IEEE80211_KEY_FLAG_GENERATE_IV_MGMT set, mac80211 will not generate CCMP/GCMP headers in frame for ath11k. Also MIC length reserved is wrong. Such frame is dropped later by hardware: ath11k_pci 0000:5a:00.0: mac tx mgmt frame, buf id 0 ath11k_pci 0000:5a:00.0: mgmt tx compl ev pdev_id 1, desc_id 0, status 1 From user point of view, we have observed very low throughput due to this issue: action frames are all dropped so ADDBA response from DUT never reaches AP. AP can not use aggregation thus throughput is low. Fix this by setting IEEE80211_KEY_FLAG_GENERATE_IV_MGMT flag and by reserving proper MIC length for those ciphers. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices") Reported-by: Yaroslav Isakov <yaroslav.isakov@gmail.com> Tested-by: Yaroslav Isakov <yaroslav.isakov@gmail.com> Closes: https://lore.kernel.org/all/CADS+iDX5=JtJr0apAtAQ02WWBxgOFEv8G063vuGYwDTC8AVZaw@mail.gmail.com Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240605014826.22498-1-quic_bqiang@quicinc.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-08-03wifi: ath12k: fix wrong definition of CE ring's base addressBaochen Qiang
[ Upstream commit 0ae570703754858a77cc42b3c9fff42e9f084608 ] Base address of CE ring is defined as u32, currently this works because DMA mask configured as 32 bit: #define ATH12K_PCI_DMA_MASK 32 However this mask could be changed once firmware bugs are fixed to fully support 36 bit DMA addressing. So to protect against any future changes to the DMA mask, change the type of the fields that are dependent upon it. This is found during code review. Compile tested only. Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices") Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240524024021.37711-1-quic_bqiang@quicinc.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-08-03wifi: ath11k: fix wrong definition of CE ring's base addressBaochen Qiang
[ Upstream commit 5714e25f1d1875b300fb337dadfaa75324c1161a ] Base address of CE ring is defined as u32, currently this works because coherent DMA mask configured as 32 bit: #define ATH11K_PCI_COHERENT_DMA_MASK 32 However this mask could be changed once firmware bugs are fixed to fully support 36 bit DMA addressing. So to protect against any future changes to the DMA mask, change the type of the fields that are dependent upon it. This is found during code review. Compile tested only. Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices") Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240524021558.34452-1-quic_bqiang@quicinc.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-08-03wifi: ath11k: Update Qualcomm Innovation Center, Inc. copyrightsJeff Johnson
[ Upstream commit ea77e9398b326d65b052096840b883271f8a7a48 ] Update the copyright for all ath11k files modified on behalf of Qualcomm Innovation Center, Inc. in 2021 through 2023. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20231128-ath12kcopyrights-v1-2-be0b7408cbac@quicinc.com Stable-dep-of: 5714e25f1d18 ("wifi: ath11k: fix wrong definition of CE ring's base address") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-08-03wifi: ath12k: fix firmware crash during reo reinjectP Praneesh
[ Upstream commit a57ab7cced454f69b8ee8aa5f5019ea8de4674da ] When handling fragmented packets, the ath12k driver reassembles each fragment into a normal packet and then reinjects it into the HW ring. However, a firmware crash occurs during this reinjection process. The issue arises because the driver populates peer metadata in reo_ent_ring->queue_addr_lo, while the firmware expects the physical address obtained from the corresponding peer’s queue descriptor. Fix it by filling peer's queue descriptor's physical address in queue_addr_lo. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00209-QCAHKSWPL_SILICONZ-1 Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices") Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240520070045.631029-4-quic_ppranees@quicinc.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-08-03wifi: ath12k: fix invalid memory access while processing fragmented packetsP Praneesh
[ Upstream commit 073f9f249eecd64ab9d59c91c4a23cfdcc02afe4 ] The monitor ring and the reo reinject ring share the same ring mask index. When the driver receives an interrupt for the reo reinject ring, the monitor ring is also processed, leading to invalid memory access. Since monitor support is not yet enabled in ath12k, the ring mask for the monitor ring should be removed. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00209-QCAHKSWPL_SILICONZ-1 Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices") Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240520070045.631029-3-quic_ppranees@quicinc.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-08-03wifi: ath12k: change DMA direction while mapping reinjected packetsP Praneesh
[ Upstream commit 33322e3ef07409278a18c6919c448e369d66a18e ] For fragmented packets, ath12k reassembles each fragment as a normal packet and then reinjects it into HW ring. In this case, the DMA direction should be DMA_TO_DEVICE, not DMA_FROM_DEVICE. Otherwise, an invalid payload may be reinjected into the HW and subsequently delivered to the host. Given that arbitrary memory can be allocated to the skb buffer, knowledge about the data contained in the reinjected buffer is lacking. Consequently, there’s a risk of private information being leaked. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00209-QCAHKSWPL_SILICONZ-1 Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices") Co-developed-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240520070045.631029-2-quic_ppranees@quicinc.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-08-03wifi: ath12k: Fix tx completion ring (WBM2SW) setup failureNithyanantham Paramasivam
[ Upstream commit 0ce9ab2785e4e9ca0752390d8e5ab65bd08f0e78 ] We observe intermittent ping failures from the access point (AP) to station (STA) in any mode (AP-STA or Mesh) configured. Specifically, the transmission completion status is not received at tx completion ring id 4 (WBM2SW ring4) for the packets transmitted via TCL DATA ring id 3. This prevents freeing up tx descriptors and leads to buffer exhaustion. Currently, during initialization of the WBM2SW ring, we are directly mapping the ring number to the ring mask to obtain the ring mask group index. This approach is causing setup failures for WBM2SW ring 4. Similarly, during runtime, when receiving incoming transmission completion status, the validation of the ring number by mapping the interrupted ring mask. This is resulting in validation failure. Thereby preventing entry into the completion handler ath12k_dp_tx_completion_handler(). The existing design assumed that the ring numbers would always be sequential and could be directly mapped with the ring mask. However, this assumption does not hold true for WBM2SW ring 4. Therefore, modify the design such that, instead of mapping the ring number, the ring ID is mapped with the ring mask. According to this design: 1. During initialization of the WBM2SW ring, mapping the ring ID to the ring mask will ensure obtaining the correct ring mask group ID. 2. During runtime, validating the interrupted ring mask group ID within the transmission completion group is sufficient. This approach allows the ring ID to be derived from the interrupted ring mask and enables entry into the completion handler. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices") Signed-off-by: Nithyanantham Paramasivam <quic_nithp@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240510070427.206152-1-quic_nithp@quicinc.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-08-03wifi: ath12k: Correct 6 GHz frequency value in rx statusPradeep Kumar Chitrapu
[ Upstream commit c3c84a74bd797f76d7da036c9fef947d674bbc18 ] The frequency in the rx status is currently being filled incorrectly for the 6 GHz band. The channel number received is invalid in this case, resulting in packet drops. Fix this issue by correcting the frequency calculation. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices") Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240508173655.22191-3-quic_pradeepc@quicinc.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-08-03wifi: brcmsmac: LCN PHY code is used for BCM4313 2G-only deviceSamasth Norway Ananda
[ Upstream commit c636fa85feb450ca414a10010ed05361a73c93a6 ] The band_idx variable in the function wlc_lcnphy_tx_iqlo_cal() will never be set to 1 as BCM4313 is the only device for which the LCN PHY code is used. This is a 2G-only device. Fixes: 5b435de0d786 ("net: wireless: add brcm80211 drivers") Signed-off-by: Samasth Norway Ananda <samasth.norway.ananda@oracle.com> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240509231037.2014109-1-samasth.norway.ananda@oracle.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-07-25wifi: iwlwifi: mvm: don't wake up rx_sync_waitq upon RFKILLEmmanuel Grumbach
commit e715c9302b1c6fae990b9898a80fac855549d1f0 upstream. Since we now want to sync the queues even when we're in RFKILL, we shouldn't wake up the wait queue since we still expect to get all the notifications from the firmware. Fixes: 4d08c0b3357c ("wifi: iwlwifi: mvm: handle BA session teardown in RF-kill") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240703064027.be7a9dbeacde.I5586cb3ca8d6e44f79d819a48a0c22351ff720c9@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-07-25wifi: iwlwifi: properly set WIPHY_FLAG_SUPPORTS_EXT_KEK_KCKDaniel Gabay
[ Upstream commit 4ec17ce716bdaf680288ce680b4621b52483cc96 ] The WIPHY_FLAG_SUPPORTS_EXT_KEK_KCK should be set based on the WOWLAN_KEK_KCK_MATERIAL command version. Currently, the command version in the firmware has advanced to 4, which prevents the flag from being set correctly, fix that. Signed-off-by: Daniel Gabay <daniel.gabay@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240703064026.a0f162108575.If1a9785727d2a1b0197a396680965df1b53d4096@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-07-25wifi: iwlwifi: mvm: Fix scan abort handling with HW rfkillIlan Peer
[ Upstream commit e6dd2936ce7ce94a1915b799f8af8193ec628e87 ] When HW rfkill is toggled to disable the RF, the flow to stop scan is called. When trying to send the command to abort the scan, since HW rfkill is toggled, the command is not sent due to rfkill being asserted, and -ERFKILL is returned from iwl_trans_send_cmd(), but this is silently ignored in iwl_mvm_send_cmd() and thus the scan abort flow continues to wait for scan complete notification and fails. Since it fails, the UID to type mapping is not cleared, and thus a warning is later fired when trying to stop the interface. To fix this, modify the UMAC scan abort flow to force sending the scan abort command even when in rfkill, so stop the FW from accessing the radio etc. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240513132416.8cbe2f8c1a97.Iffe235c12a919dafec88eef399eb1f7bae2c5bdb@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-07-25wifi: iwlwifi: mvm: properly set 6 GHz channel direct probe optionAyala Beker
[ Upstream commit 989830d1cf16bd149bf0690d889a9caef95fb5b1 ] Ensure that the 6 GHz channel is configured with a valid direct BSSID, avoiding any invalid or multicast BSSID addresses. Signed-off-by: Ayala Beker <ayala.beker@intel.com> Reviewed-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240513132416.91a631a0fe60.I2ea2616af9b8a2eaf959b156c69cf65a2f1204d4@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-31 13:42:04 +0000