summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/rt2x00/rt2800.h
AgeCommit message (Collapse)Author
2012-01-04rt2x00: Change RF3853 to RF3053.Gertjan van Wingerde
According to the latest Ralink vendor drivers, this seems to be the real RF chipset type. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-14rt2x00: Add LED_CFG register descriptionHelmut Schaa
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-01rt2x00: Add support for RT3572/RT3592/RT3592+Bluetooth combo cardGertjan van Wingerde
(based on an earlier patch submitted by Shiang) Add support for RT3572/RT3592/RT3592+Bluetooth combo card Signed-off-by: Shiang Tu <shiang_tu@ralinktech.com> Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-16Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem Conflicts: drivers/net/wireless/iwlwifi/iwl-agn-tx.c net/mac80211/sta_info.h
2011-05-05rt2x00: Initial support for RT5370 USB devices.Gertjan van Wingerde
Add necessary RF chipset define and basic support for these devices. Tested-by: Juan Carlos Garza <juancarlosgarza@gmail.com> Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-12Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem Conflicts: drivers/net/wireless/ath/ar9170/main.c drivers/net/wireless/ath/ar9170/phy.c drivers/net/wireless/zd1211rw/zd_rf_rf2959.c
2011-04-04rt2x00: Implement tx power temperature compensationHelmut Schaa
rt2800 devices should adjust their tx power in accordance with the eeproms temperature calibration values. Add a new driver callback gain_calibration that is called every 4 seconds. The rt2800 gain calibration routine simply runs the tx power configuration that takes care of calculating the temperature compensation delta. We don't need to synchronize the calls to rt2800_config_txpower as they should all happen from mac80211's single threaded workqueue. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-31Fix common misspellingsLucas De Marchi
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-04rt2x00: fix whitespace damage in the rt2800 specific codeGabor Juhos
The rt2800 specific code contains a lots of whitespace damage caused by the commit 'rt2x00: Add support for RT5390 chip'. This patch fixes those whitespace errors. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-21rt2x00: Add support for RT5390 chipRA-Shiang Tu
Add new RT5390 chip support Signed-off-by: Shiang Tu <shiang_tu@ralinktech.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-21rt2x00: Add/Modify the GPIO register definitionShiang Tu
Revise/Add GPIO register related definitions Signed-off-by: Shiang Tu <shiang_tu@ralinktech.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-21rt2x00: Add/Modify protection related register definitionsShiang Tu
Make the definition of protection related registers more precisely Signed-off-by: Shiang Tu <shiang_tu@ralinktech.com> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-21rt2x00: Fix rt2800 txpower setting to correct valueRA-Jay Hung
TX_PWR_CFG_* setting need to consider below cases -compesate 20M/40M tx power delta for 2.4/5GHZ band -limit maximum EIRP tx power to power_level of regulatory requirement Signed-off-by: RA-Jay Hung <jay_hung@ralinktech.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-21rt2x00: Add antenna setting for RT3070/RT3090/RT3390 with RX antenna ↵RA-Jay Hung
diversity support For RT3070/RT3090/RT3390 with RX antenna diversity support, we must select default antenna using gpio control way even if we do not turn on antenna diversity feature. Seperate the meaning of TX/RX chain and antenna. Some chips use 2x2 TX/RX chain but may have 3 RX antennas or 1x1 TX/RX chain but may have 2 RX antennas to do antenna diversity. Signed-off-by: RA-Jay Hung <jay_hung@ralinktech.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-31rt2x00: Correct initial value of US_CYC_CNT register for pcie interfaceRA-Jay Hung
CLOCK CYCLE: Clock cycle count in 1us PCI:0x21, PCIE:0x7d, USB:0x1e Signed-off-by: RA-Jay Hung <jay_hung@ralinktech.com> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-19rt2x00: Fix and fine-tune rf registers for RT3070/RT3071/RT3090RA-Jay Hung
Basically fix and fine-tune RT3070/RT3071/RT3090 chip RF initial value when call rt2800_init_rfcsr Signed-off-by: RA-Jay Hung <jay_hung@ralinktech.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-13rt2x00: Fix WMM Queue namingIvo van Doorn
The Queue names were incorrectly copied from the legacy drivers, as a result the queue names were inversed to what was expected. This renames the queues using this mapping: QID_AC_BK -> QID_AC_VO (priority 0) QID_AC_BE -> QID_AC_VI (priority 1) QID_AC_VI -> QID_AC_BE (priority 2) QID_AC_VO -> QID_AC_BK (priority 3) Note that this was a naming problem only, which didn't affect the assignment of frames to their respective queues. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-13rt2x00: Add RF chip definitionRA-Jay Hung
Add RF chip definition Signed-off-by: RA-Jay Hung <jay_hung@ralinktech.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-13rt2x00: Implement get_survey callback for rt2800Helmut Schaa
Implement the get_survey callback to allow user space to read statistics about the current channel condition. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-13rt2x00: Add rt2800 EEPROM definitionRA-Jay Hung
Add and modify NIC Configuration and LED definition of EEPROM Signed-off-by: RA-Jay Hung <jay_hung@ralinktech.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-17rt2x00: Add initial support for RT3370/RT3390 devices.Gertjan van Wingerde
Modified from Eddy's patch by adding the RT3370 USB support as well. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Cc: Eddy Tsai <Eddy_Tsai@ralinktech.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-15rt2x00: Add watchdog functions for HW queueIvo van Doorn
Add watchdog functions for managing the Queues inside the hardware. Normally the driver doesn't have much to do with these queues directly, but the Ralink drivers did implement watchdog functions for these. These watchdog functions are not triggered that often, compared to the other watchdog functions, but I have at least seen them trigger once or twice during a long stresstest run. v2: Add extra documentation for register fields Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-15rt2x00: checkpatch.pl error fixes for rt2800.hMark Einon
rt2800.h:1511: ERROR: space prohibited after that open parenthesis '(' rt2800.h:1511: ERROR: space prohibited before that close parenthesis ')' rt2800.h:1513: ERROR: space prohibited after that open parenthesis '(' rt2800.h:1513: ERROR: space prohibited before that close parenthesis ')' rt2800.h:1515: ERROR: space prohibited after that open parenthesis '(' rt2800.h:1515: ERROR: space prohibited before that close parenthesis ')' rt2800.h:1517: ERROR: space prohibited after that open parenthesis '(' rt2800.h:1517: ERROR: space prohibited before that close parenthesis ')' rt2800.h:1519: ERROR: space prohibited after that open parenthesis '(' rt2800.h:1519: ERROR: space prohibited before that close parenthesis ')' rt2800.h:1521: ERROR: space prohibited after that open parenthesis '(' rt2800.h:1521: ERROR: space prohibited before that close parenthesis ')' rt2800.h:1661: ERROR: space prohibited after that open parenthesis '(' rt2800.h:1661: ERROR: space prohibited before that close parenthesis ')' rt2800.h:1662: ERROR: space prohibited after that open parenthesis '(' rt2800.h:1662: ERROR: space prohibited before that close parenthesis ')' rt2800.h:1663: ERROR: space prohibited before that close parenthesis ')' rt2800.h:2013: ERROR: space prohibited after that open parenthesis '(' rt2800.h:2013: ERROR: space prohibited before that close parenthesis ')' rt2800.h:2014: ERROR: space prohibited after that open parenthesis '(' rt2800.h:2014: ERROR: space prohibited before that close parenthesis ')' Signed-off-by: Mark Einon <mark.einon@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-15rt2x00: Add TXOP_CTRL_CFG register definitionHelmut Schaa
Remove the magic value initialisation of the TXOP_CTRL_CFG register by defining its fields and using them during intialisation. The field RESERVED_TRUN_EN is referred to as reserved, however it is set to 1 by the legacy drivers. Hence, do the same. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-05rt2x00: Update comment about the AMPDU flag in the TXWIHelmut Schaa
During testing with AMPDUs it turned out that the rt2800 hw will aggregate consecutive frames with the same RA and TID when the first frame in a possible aggregate has set AMPDU=1 in the TXWI. If a following frame has set AMPDU=0 in its TXWI it might sill end up in the aggregate of the previous frame. Update the comment accordingly. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-05rt2x00: Improve TX status entry validationIvo van Doorn
The TX_STA_FIFO contains some information for identifying a outgoing frame, however matching by WCID and ACK status is not sufficient to 100% identify the macthing queue_entry structure (containing the SKB buffer) which belongs to the status report. Within TX_STA_FIFO we have a 4-bit field named PACKETID, which is currently used to encode the queue id. The queue ID is however limited to values from 0 to 3, which means 2 bits are sufficient to encode the value. With the remaining 2 bits we can encode a partial queue_entry index number. The value of PACKETID is not allowed to become 0, with the queue ID ranging from 0 to 3, at least one of the bits for the entry identification must be 1. That leaves us with 3 possible values we can still encode in the bits. Altough this doesn't allow 100% accurate matching of the TX_STA_FIFO queue to a queue_entry structure, it at least improves the accuracy. This allows us to better detect if we have missed the TX_STA_FIFO report, which in turn reduces the number of watchdog warnings regarding the TX status timeout. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-05rt2x00: add field definitions for the TBTT_SYNC_CFG registerHelmut Schaa
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-05rt2x00: Add register definition for busy time on secondary channelHelmut Schaa
Add the register definition CH_BUSY_STA_SEC for reading the busy time on the secondary channel in HT40 mode. Also update the comments about channel busy/idle time registers to express the used unit. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-05rt2x00: Allow tx duplication for legacy rates in HT40 modeHelmut Schaa
Make use of the IEEE80211_TX_RC_DUP_DATA flag to duplicate a transmission with legacy rates to both 20Mhz channels if set. Also update the related comment in rt2800.h to describe the behavior of the BW_40 flag for legacy rates. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-05rt2x00: Don't overwrite beacon buffers in pairwise key setupHelmut Schaa
rt2800 devices use parts of the pariwise key table to store the beacon frames for beacon 6 and 7. To not overwrite the beacon frame buffers limit the number of entries we store in the pairwise key table to 222. Also add some descriptive comments about this shared memory usage. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-09-14rt2x00: Initialize AMPDU_BA_WINSIZE registerHelmut Schaa
Since we're not using the AMPDU_BA_WINSIZE register to force the BlockAck window size (we specify it in every TXWI) we should initialize it to 0. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-31rt2x00: Update rt2800 comments regarding AMPDU and PACKET_ID in TXWIHelmut Schaa
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-25rt2x00: Fix max TX power settingsIvo van Doorn
During initialization each driver reads the default TX power for each individual channel. However mac80211 only accepts the maximum value (which is also handled as default value). As a result, the TX power of the device was being limited to the default value, which is often quite low compared to the real maximum acceptable value. This patch allows each driver to set the maximum value on a per-channel basis which is forwarded to mac80211. The default value will be preserved for now, in case we want to update mac80211 to differentiate between the maximum and default txpower. This fixes bug complaining about limited TX power values like: https://bugzilla.kernel.org/show_bug.cgi?id=16358 Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-16rt2x00: Update comments regarding TXWI and TX_STA_FIFOHelmut Schaa
Add some comments about the TXWI fields and the TX_STA_FIFO register. Especially describe the relationship between the TXWI field PACKETID and the PID field in the TX_STA_FIFO register. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-13Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem Conflicts: drivers/net/wireless/wl12xx/wl1271_cmd.h
2010-07-12rt2x00: Use pretbtt irq for fetching beacons on rt2800pciHelmut Schaa
Updating the beacon on pre tbtt instead of beacondone allows much lower latency in regard to TIM updates. Hence, use the pre tbtt interrupt for updating the beacon in rt2800pci (older devices don't provide a pre tbtt interrupt). Also, add a new driver flag to indicate if a driver has pre tbtt support or not and implement the according behavior in rt2x00lib. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-12rt2x00: Convert AGC value from descriptor to RSSI (dBm)Ivo van Doorn
The RSSI values in the RXWI descriptor aren't true RSSI values. Instead they are more like the AGC values similar to rt61pci. And as such, it needs the same conversion before it can be passed to rt2x00lib/mac80211. This requires the struct queue_entry to be passed to rt2800_process_rxwi rather then the skb structure which is contained in the queue_entry. This is required to obtain the lna_gain information from the rt2x00_dev structure. This fixes connection problems when using wpa_supplicant which would try to connect to the worst AP's rather then the best ones. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-12rt2x00: Limit txpower by eeprom valuesHelmut Schaa
Limit the txpower per rate by the approriate values in the eeprom. This avoids too high txpower values resulting in bad tx performance. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-17Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2010-06-15rt2x00: Synchronize WCID initialization with legacy driverIvo van Doorn
Legacy rt2870 driver handles WCID differently then we expected, the BSSID and Cipher value are 3 bit values, while the 4th bit should be set elsewhere in an extended field. After this, rt2800usb reports frames have been decrypted successfully, indicating that the Hardware decryption now is working correctly. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-15rt2x00: Add comment about BBP1_TX_POWERHelmut Schaa
Add a comment about the meaning of BBP1_TX_POWER stating all possible values. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-11Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 Conflicts: drivers/net/wireless/wl12xx/wl1271.h drivers/net/wireless/wl12xx/wl1271_cmd.h
2010-06-03drivers/net: use __packed annotationEric Dumazet
cleanup patch. Use new __packed annotation in drivers/net/ Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-03rt2x00: Move all register definitions for rt2800 to rt2800.h.Gertjan van Wingerde
There is no point on having them separated across 3 files. At the same time rename USB_CYC_CFG to its proper name US_CYC_CNT (as per the datasheet). Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
2010-06-03rt2x00: Remove RT2870 chipset identification.Gertjan van Wingerde
There is no evidence, either in adapters or in the Ralink code, that such a device actually exists. All so-call RT2870 adapter identify themselves as RT2860. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
2010-05-04rt2x00: Fix HT40+/HT40- setting in rt2800.Gertjan van Wingerde
Inspection of the Ralink vendor driver shows that the TX_BAND_CFG register and BBP register 3 are about HT40- indication, not about HT40+ indication. Inverse the meaning of these fields in the code. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-26rt2x00: fix typo in rt2800.hHelmut Schaa
Fix a typo in a comment in rt2800.h. Instead of replacing the wrong hexvalue (0x171c) with the correct one (0x1718) just use the appropriate readable define. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-26rt2x00: rt2800: use tx_power2 in rt2800_config_channel_rf3xxxHelmut Schaa
Get closer to what the ralink driver does by setting the rf register 13 to tx_power2 during channel switch. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-12rt2x00: Refactor rt2800 version constants.Gertjan van Wingerde
The rt2800 version constants are inconsistent, and the version number don't mean a lot of things anyway. Refactor the constants to have some more meaningful names, and introduce and use some new helpers to check these chipset revisions. At the same time rename to revision, as they are more revision numbers rather than version numbers. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-12rt2x00: Align RT chipset definitions with vendor driver.Gertjan van Wingerde
Only include definitions for RT chipsets that are also used inside the Ralink vendor drivers. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-06 04:18:47 +0000