summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/rsi/rsi_91x_mac80211.c
AgeCommit message (Collapse)Author
2017-09-20rsi: tx and rx path enhancements for p2p modePrameela Rani Garnepudi
Data descriptor is updated to include vap_id. TX command frame key config also updated to include vap_id. Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-09-20rsi: handle peer connection and disconnection in p2p modePrameela Rani Garnepudi
Parameter 'vif' is passed to inform_bss_status function to check the type of vif and to get vap_id. Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-09-20rsi: add support for p2p listenPrameela Rani Garnepudi
Remain-on-channel and cancel-remain-on-channel are implemented to support p2p listen phase. Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-09-20rsi: add/remove interface enhancements for p2pPrameela Rani Garnepudi
STA_OPMODE and AP_OPMODE macros are renamed to RSI_OPMODE_STA and RSI_OPMODE_AP. New opmodes are added to this list for P2P support. Mapping of mac80211 interface types to rsi interface types are added. Add and remove interface callbacks are handled for P2P mode. Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-09-20rsi: add p2p support parameters to mac80211Prameela Rani Garnepudi
This patch adds p2p supported parameters to mac80211 hw and wiphy structures during mac80211 registration. Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-30rsi: missing unlocks on error pathsDan Carpenter
There is a missing unlock if rsi_find_sta() fails in rsi_mac80211_ampdu_action() or if we hit the -EINVAL path in rsi_mac80211_sta_add(). Fixes: 3528608f3a79 ("rsi: handle station connection in AP mode") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-30rsi: update some commentsDan Carpenter
These functions don't return -1 on failure. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-24net: rsi: mac80211: constify ieee80211_opsArvind Yadav
ieee80211_ops are not supposed to change at runtime. All functions working with ieee80211_ops provided by <net/mac80211.h> work with const ieee80211_ops. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-17rsi: security enhancements for AP modePrameela Rani Garnepudi
Station id should be set in load key frame configured to device. For WEP mode, key is configured once from mac80211. This key is saved and configured to device every time a station is connected. Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-17rsi: aggregation parameters frame for AP modePrameela Rani Garnepudi
TX command frame ampdu aggregation parameters is updated to include sta_id for AP mode. Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-17rsi: handle station disconnection in AP modePrameela Rani Garnepudi
When sta_remove of mac80211 is called, driver iterates through list of existing stations to get the station id. Then peer notify is prepared and send to firmare. Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-17rsi: handle station connection in AP modePrameela Rani Garnepudi
Station structures are maintained in driver with required fields. When mac80211 callback sta_add is called, driver iterates through list of connected stations to check available index and assigns station id which is important for further communication to that station. Then peer notify frame is send to firmware to inform the firmware about new station connection. Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-17rsi: add beacon changes for AP modePrameela Rani Garnepudi
Mac80211 config parameter BEACON_ENABLE is handled. When VAP capabilities frame with AP mode is configured to firmware, beacon events start coming to host at each PreTBTT. At this time, beacon is taken from mac80211, descriptor is prepared and send to firmware. Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-17rsi: remove interface changes for AP modePrameela Rani Garnepudi
remove_interface callback of mac80211 is handled for AP mode. Same is notified to firmware through vap_capabilities frame with VAP status VAP_DELETE. Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-17rsi: add interface changes for ap modePrameela Rani Garnepudi
AP mode is handled in add_interface callback of mac80211. Also for AP mode, sending rx filter frame to disallow beacons to host is added. Station structures are initialized to NULL. Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-17rsi: advertise ap mode supportPrameela Rani Garnepudi
AP mode support is advertised to cfg80211. Necessary wiphy parameters are initialized. Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-08rsi: RTS threshold configurationKarun Eagalapati
Provision is added for configuring RTS threshold by sending vap dynamic update frame to firmware. Signed-off-by: Karun Eagalapati <karun256@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-08rsi: add support for U-APSD power saveKarun Eagalapati
This patch adds support for U-APSD power save. Configuration frame is downloaded to firmware with default settings and support is advertised to mac80211 Signed-off-by: Karun Eagalapati <karun256@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-08rsi: add support for legacy power saveKarun Eagalapati
This patch adds support for legacy power save. Necessary configuration frames are downloaded to firmware when power save is enabled/disabled Signed-off-by: Karun Eagalapati <karun256@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-08rsi: add support for rf-kill functionalityPavani Muthyala
This patch implements rfkill_poll handler. Also, necessary changes are done in interface up and down handler to support rfkill functionality. Signed-off-by: Pavani Muthyala <pavani.muthyala@redpinesignals.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-07-28rsi: regulatory enhancementsPrameela Rani Garnepudi
Below regulatory changes are included this patch * Country code is saved as it will be used in bgscan. * Region codes are mapped according to RSI region codes. * Radar flag settings are moved under the check if 5GHZ band is enabled. Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-07-28rsi: Send rx filter frame to device when interface is downPrameela Rani Garnepudi
When interface is down it is better to stop all RX packets to host. 0xffff will block all packets to host. Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-07-28rsi: Remove internal header from Tx status skbPrameela Rani Garnepudi
Device specific descriptor for each TX packet is prepared on top of skb data address. This descriptor should be pulled out before indicating the TX status to mac80211. Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-03-06wireless: Set NL80211_EXT_FEATURE_CQM_RSSI_LIST in multiple driversAndrew Zaborowski
Set the NL80211_EXT_FEATURE_CQM_RSSI_LIST wiphy extended feature wholesale in all mac80211-based drivers that do not set the IEEE80211_VIF_BEACON_FILTER flags on their interfaces. mac80211 will be processing supplied RSSI values in ieee80211_rx_mgmt_beacon and will detect when the thresholds set by ieee80211_set_cqm_rssi_range_config are crossed. Remaining (few) drivers need code to enable the firmware to monitor the thresholds. This is mostly only compile-tested. Signed-off-by: Andrew Zaborowski <andrew.zaborowski@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-02-08mac80211: Pass new RSSI level in CQM RSSI notificationAndrzej Zaborowski
Extend ieee80211_cqm_rssi_notify with a rssi_level parameter so that this information can be passed to netlink clients in the next patch, if available. Most drivers will have this value at hand. wl1251 receives events from the firmware that only tell it whether latest measurement is above or below threshold so we don't pass any value at this time (parameter is 0). Signed-off-by: Andrew Zaborowski <andrew.zaborowski@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-11-25rsi: Add support for 802.11dPrameela Rani Garnepudi
Transmit power level in a channel is determined based on the dfs region. To support regulatory rules dfs region should be configured to device during set channel request. Also antenna gain values are taken from the mac80211 channel parameters instead of fixed values. Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-11-25rsi: Add support for antenna selectionPrameela Rani Garnepudi
RSI 9113 device supports single antenna for tx and rx. Support for using external is added. This can be configured from user space using iw. Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-11-25rsi: Add support for configuring tx powerPrameela Rani Garnepudi
TX power can be configured from iwconfig, iw or from mac80211 when regulatory changes are done. Hence support for configuring tx power to device is added using the RADIO_PARAMS_UPDATE command frame. Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-11-25rsi: Add support to filter rx framesPrameela Rani Garnepudi
Filtering rx frames after connection in station mode avoids the overhead of processing un-necessary frames. Hence rx filter frame is added which can be configured to device at suitable times. Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-11-17rsi: Host to device command frame vap_capabilites modified with new field ↵Prameela Rani Garnepudi
vap status * Command frame vap_capabilites is modified to use for vap add, vap delete and vap update in firmware, hence new filed vap status is added. * When interface is down this frame needs to be send with vap status delete. Otherwise it is considered as wrong frame for the same interface in firmware. * vap_update status is reserved for future. Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-11-17rsi: Fix memory leak in module unloadPrameela Rani Garnepudi
Observed crash when module is unloaded if CONFIG_RSI_DEBUGSFS is not set. Fix: Debugfs entry removal moved inside CONFIG_RSI_DEBUGSFS flag in function rsi_mac80211_detach() Memory leak found and fixed for below structures in function rsi_mac80211_detach() * channel list for each supported band * rsi debugfs info Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-12cfg80211: remove enum ieee80211_bandJohannes Berg
This enum is already perfectly aliased to enum nl80211_band, and the only reason for it is that we get IEEE80211_NUM_BANDS out of it. There's no really good reason to not declare the number of bands in nl80211 though, so do that and remove the cfg80211 one. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-01-14mac80211: pass block ack session timeout to to driverSara Sharon
Currently mac80211 does not inform the driver of the session block ack timeout when starting a rx aggregation session. Drivers that manage the reorder buffer need to know this parameter. Seeing that there are now too many arguments for the drv_ampdu_action() function, wrap them inside a structure. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-09-22mac80211: allow to transmit A-MSDU within A-MPDUEmmanuel Grumbach
Advertise the capability to send A-MSDU within A-MPDU in the AddBA request sent by mac80211. Let the driver know about the peer's capabilities. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-06-10mac80211: convert HW flags to unsigned long bitmapJohannes Berg
As we're running out of hardware capability flags pretty quickly, convert them to use the regular test_bit() style unsigned long bitmaps. This introduces a number of helper functions/macros to set and to test the bits, along with new debugfs code. The occurrences of an explicit __clear_bit() are intentional, the drivers were never supposed to change their supported bits on the fly. We should investigate changing this to be a per-frame flag. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-06-19rsi: Changes for 40MHzJahnavi Meher
Added code required for 40MHz. Signed-off-by: Jahnavi Meher <jahnavi.meher@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19rsi: Adding support for host based bgscan.Jahnavi Meher
Added support for host based bgscan. The h/w queues are blocked while bgscan is being performed and after coming to the connected channel, the queues are unblocked. Signed-off-by: Jahnavi Meher <jahnavi.meher@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19rsi: Adding support for 5GHzJahnavi Meher
Adding support for 5GHz. Signed-off-by: Jahnavi Meher <jahnavi.meher@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19rsi: Using band from rsi_common to fill in ieee80211_rx_statusJahnavi Meher
Filling in band from common->band. Signed-off-by: Jahnavi Meher <jahnavi.meher@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19rsi: Fixed the kernel docJahnavi Meher
Changed the function header to match the function name. Signed-off-by: Jahnavi Meher <jahnavi.meher@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-13rsi: Changed the return value to enable BA set-upJahnavi Meher
Signed-off-by: Jahnavi Meher <jahnavi.meher@redpinesignals.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-03-17rsi: Add RS9113 wireless driverFariya Fatima
This patch adds the Redpine Signals' 91x wireless driver. Signed-off-by: Fariya Fatima <fariyaf@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-01 23:50:23 +0000