| Age | Commit message (Collapse) | Author |
|---|
|
The PPDU status of probe response will fail to parse the IE due to being
filtered by the to_self check. Therefore, we parse RSSI from PHY report in
RX descriptor.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241128055433.11851-5-pkshih@realtek.com
|
|
Declare beacon filter and connection monitor for 8852BT.
This offloads connection monitor mechanism to firmware, and this
is required for the MCC feature.
Signed-off-by: Po-Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241128055433.11851-4-pkshih@realtek.com
|
|
Declare beacon filter and connection monitor for 8852B.
This offloads connection monitor mechanism to firmware, and this
is required for the MCC feature.
Signed-off-by: Po-Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241128055433.11851-3-pkshih@realtek.com
|
|
Extend the bitfield for duration in channel info to 16 bits.
Update the related format in H2C and C2H, then increase firmware
format sequence to 3.
Signed-off-by: Po-Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241128055433.11851-2-pkshih@realtek.com
|
|
When calling ieee80211_nullfunc_get(), pass the target link_id
instead of always -1.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241120034054.13575-7-pkshih@realtek.com
|
|
When calling ieee80211_gtk_rekey_add(), pass the target link_id
instead of always -1.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241120034054.13575-6-pkshih@realtek.com
|
|
In MLD connection, a pairwise key should work on all active links. And, we
take just one entry in security CAM for one pairwise key. (It means we will
reuse one single entry for all links.) Originally, we already applied the
security CAM entry of pairwise key to deflink's address CAM.
However, links can be activated dynamically. So now for pairwise keys, each
rtw89_sta records the IDs of the security CAM entries. Then, when driver is
notified that some links are active via change_sta_links(), we apply target
pairwise keys to them according to the record.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241120034054.13575-5-pkshih@realtek.com
|
|
To support MLO, implement change_vif_links() and change_sta_links() ops.
Basically, we follow arguments to set/clear links. One special thing is
that when vif is idle, i.e. no connection, link id 0 is set up by us for
default uses. So, when bitmap of vif links change from 0x0 to non-zero,
we clear the default one first. And when bitmap of vif links change from
non-zero to 0x0, we set up a default one at the end.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241120034054.13575-4-pkshih@realtek.com
|
|
Register mac80211 ops of can_activate_links which is required when
we are ready to enable multiple active links.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241120034054.13575-3-pkshih@realtek.com
|
|
After FW v0.35.46.0, for AP mode, RTL8922A FW supports a new FW feature,
called NOTIFY_AP_INFO, to notify driver information related to AP mode.
And, one function of it is to monitor PS states of remote stations. Once
one of them changes, FW will send a C2H event to tell driver. With this
FW feature, we can declare AP_LINK_PS.
For now, driver still needs to determine if a frame is ps-poll or U-APSD
trigger. So, add the corresponding RX handling in driver, which activates
only when at least one AP is running.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241120034054.13575-2-pkshih@realtek.com
|
|
USB RX aggregation improves the RX speed on certain ARM systems, like
the NanoPi NEO Core2. With RTL8811AU, before: 30 Mbps, after: 224 Mbps.
The out-of-tree driver uses aggregation size of 7 in USB 3 mode, but
that doesn't work here. rtw88 advertises support for receiving AMSDU
in AMPDU, so the AP sends larger frames, up to ~5100 bytes. With a size
of 7 RTL8812AU frequently tries to aggregate more frames than will fit
in 32768 bytes. Use a size of 6 instead.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/63012163-a425-4b15-b830-43f279c06b73@gmail.com
|
|
Add the function to automatically switch the RTL8812AU into USB 3 mode.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/19cda72b-f1f1-4b69-8369-0e4376b646bf@gmail.com
|
|
The rtl8xxxu has all the rtl8192cu USB IDs from rtlwifi/rtl8192cu/sw.c
except for the following 10, add these to the untested section so they
can be used with the rtl8xxxu as the rtl8192cu are well supported.
This fixes these wifi modules not working on distributions which have
disabled CONFIG_RTL8192CU replacing it with CONFIG_RTL8XXXU_UNTESTED,
like Fedora.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2321540
Cc: stable@vger.kernel.org
Cc: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241107140833.274986-1-hdegoede@redhat.com
|
|
The dynamic antenna gain (DAG) may independently apply different TX
powers for each RF path. This can be accomplished by using the larger
TX power as the reference path and adjusting the TX power of the
other path based on the difference. Currently only 8852BE/8852BTE/
8852CE are supported.
Signed-off-by: Kuan-Chung Chen <damon.chen@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241111065132.19587-4-pkshih@realtek.com
|
|
Dynamic Antenna Gain (DAG) adjusts the transmit power based on the
platform's antenna gain. This allows for higher transmit power when
the antenna gain is lower, while still complying with regulatory
limits. The driver reads the Realtek Antenna Gain (RTAG) data from
BIOS, and DAG is only enabled when the regulatory domain allows it.
Currently, it only supports 8852BE/8852BTE/8852CE.
Signed-off-by: Kuan-Chung Chen <damon.chen@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241111065132.19587-3-pkshih@realtek.com
|
|
Given that the 6GHz subband edges are not aligned, specific frequencies
can span two adjacent subbands. We considered the need for this
functionality outside of SAR and moved it to a common function.
No logic change for existing chips.
Signed-off-by: Kuan-Chung Chen <damon.chen@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241111065132.19587-2-pkshih@realtek.com
|
|
The PCIE wake bit is to control PCIE wake signal to host. When PCIE is
going down, clear this bit to prevent waking up host unexpectedly.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241111063835.15454-1-pkshih@realtek.com
|
|
rtl_init_core creates a workqueue that is then assigned to rtl_wq.
rtl_deinit_core does not destroy it. It is left to rtl_usb_deinit, which
must be called in the probe error path.
Fixes: 2ca20f79e0d8 ("rtlwifi: Add usb driver")
Fixes: 851639fdaeac ("rtlwifi: Modify some USB de-initialize code.")
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241107133322.855112-6-cascardo@igalia.com
|
|
If ieee80211_register_hw fails, the memory allocated for the firmware will
not be released. Call deinit_sw_vars as the function that undoes the
allocationes done by init_sw_vars.
Fixes: cefe3dfdb9f5 ("rtl8192cu: Call ieee80211_register_hw from rtl_usb_probe")
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241107133322.855112-5-cascardo@igalia.com
|
|
At probe error path, the firmware loading work may have already been
queued. In such a case, it will try to access memory allocated by the probe
function, which is about to be released. In such paths, wait for the
firmware worker to finish before releasing memory.
Fixes: a7f7c15e945a ("rtlwifi: rtl8192cu: Free ieee80211_hw if probing fails")
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241107133322.855112-4-cascardo@igalia.com
|
|
Just like in commit 4dfde294b979 ("rtlwifi: rise completion at the last
step of firmware callback"), only signal completion once the function is
finished. Otherwise, the module removal waiting for the completion could
free the memory that the callback will still use before returning.
Fixes: b0302aba812b ("rtlwifi: Convert to asynchronous firmware load")
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241107133322.855112-3-cascardo@igalia.com
|
|
The only code waiting for completion is driver removal, which will not be
called when probe returns a failure. So this completion is unnecessary.
Fixes: b0302aba812b ("rtlwifi: Convert to asynchronous firmware load")
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241107133322.855112-2-cascardo@igalia.com
|
|
A previous clean-up fix removed the assignment of v2 inside a while loop
that turned it into an infinite loop. Fix this by restoring the assignment
of v2 from array[] so that v2 is updated inside the loop.
Fixes: cda37445718d ("wifi: rtlwifi: rtl8821ae: phy: remove some useless code")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Tested-by: Ping-Ke Shih <pkshih@realtek.com>
Reviewed-by: Su Hui <suhui@nfschina.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241106154642.1627886-1-colin.i.king@gmail.com
|
|
Add three additional USB IDs found in
https://github.com/morrownr/88x2bu-20210702
to support more RTL8812BU devices.
Signed-off-by: Nick Morrow <usbwifi2024@gmail.com>
Signed-off-by: Zenm Chen <zenmchen@gmail.com>
Reviewed-by: Mikhail Novosyolov <m.novosyolov@rosalinux.ru>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241107002846.13748-1-zenmchen@gmail.com
|
|
From https://github.com/morrownr/8812au-20210820.
Signed-off-by: Nick Morrow <usbwifi2024@gmail.com>
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/31b7ee6b-f96d-43e0-a32f-a9eb1174a0c1@gmail.com
|
|
These are the entries that Nick Morrow provided. From
https://github.com/morrownr/8821au-20210708
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/da05b866-a9ff-428c-a008-35e8cf200a98@gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.13
Most likely the last -next pull request for v6.13. Most changes are in
Realtek and Qualcomm drivers, otherwise not really anything
noteworthy.
Major changes:
mac80211
* EHT 1024 aggregation size for transmissions
ath12k
* switch to using wiphy_lock() and remove ar->conf_mutex
* firmware coredump collection support
* add debugfs support for a multitude of statistics
ath11k
* dt: document WCN6855 hardware inputs
ath9k
* remove include/linux/ath9k_platform.h
ath5k
* Arcadyan ARV45XX AR2417 & Gigaset SX76[23] AR241[34]A support
rtw88:
* 8821au and 8812au USB adapters support
rtw89
* thermal protection
* firmware secure boot for WiFi 6 chip
* tag 'wireless-next-2024-11-13' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (154 commits)
Revert "wifi: iwlegacy: do not skip frames with bad FCS"
wifi: mac80211: pass MBSSID config by reference
wifi: mac80211: Support EHT 1024 aggregation size in TX
net: rfkill: gpio: Add check for clk_enable()
wifi: brcmfmac: Fix oops due to NULL pointer dereference in brcmf_sdiod_sglist_rw()
wifi: Switch back to struct platform_driver::remove()
wifi: ipw2x00: libipw_rx_any(): fix bad alignment
wifi: brcmfmac: release 'root' node in all execution paths
wifi: iwlwifi: mvm: don't call power_update_mac in fast suspend
wifi: iwlwifi: s/IWL_MVM_INVALID_STA/IWL_INVALID_STA
wifi: iwlwifi: bump minimum API version in BZ/SC to 92
wifi: iwlwifi: move IWL_LMAC_*_INDEX to fw/api/context.h
wifi: iwlwifi: be less noisy if the NIC is dead in S3
wifi: iwlwifi: mvm: tell iwlmei when we finished suspending
wifi: iwlwifi: allow fast resume on ax200
wifi: iwlwifi: mvm: support new initiator and responder command version
wifi: iwlwifi: mvm: use wiphy locked debugfs for low-latency
wifi: iwlwifi: mvm: MLO scan upon channel condition degradation
wifi: iwlwifi: mvm: support new versions of the wowlan APIs
wifi: iwlwifi: mvm: allow always calling iwl_mvm_get_bss_vif()
...
====================
Link: https://patch.msgid.link/20241113172918.A8A11C4CEC3@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
rtw-next patches for v6.13
Major changes are listed:
rtw88:
- support two USB adapters 8821au and 8812au
rtw89:
- add thermal protection
- fine tune BT-coexsitence to improve user experience
- firmware secure boot for WiFi 6 chip
- more materials for MLO
|
|
exhalbtc_rf_status_notify(), exhalbtc_coex_dm_switch() and
exhalbtc_antenna_detection() are unused since they were added in 2017's
commit 7937f02d1953 ("rtlwifi: btcoex: hook external functions for newer
chips")
Remove them.
This leaves ex_btc8723b1ant_coex_dm_reset() unused.
Remove it.
exhalbtc_dbg_control(), exhalbtc_stack_update_profile_info(),
exhalbtc_set_hci_version(), and exhalbtc_set_bt_patch_version() are
unused since their addition in 2014 by
commit aa45a673b291 ("rtlwifi: btcoexist: Add new mini driver")
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241104144331.29262-1-linux@treblig.org
|
|
Syzkaller reported a hung task with uevent_show() on stack trace. That
specific issue was addressed by another commit [0], but even with that
fix applied (for example, running v6.12-rc5) we face another type of hung
task that comes from the same reproducer [1]. By investigating that, we
could narrow it to the following path:
(a) Syzkaller emulates a Realtek USB WiFi adapter using raw-gadget and
dummy_hcd infrastructure.
(b) During the probe of rtl8192cu, the driver ends-up performing an efuse
read procedure (which is related to EEPROM load IIUC), and here lies the
issue: the function read_efuse() calls read_efuse_byte() many times, as
loop iterations depending on the efuse size (in our example, 512 in total).
This procedure for reading efuse bytes relies in a loop that performs an
I/O read up to *10k* times in case of failures. We measured the time of
the loop inside read_efuse_byte() alone, and in this reproducer (which
involves the dummy_hcd emulation layer), it takes 15 seconds each. As a
consequence, we have the driver stuck in its probe routine for big time,
exposing a stack trace like below if we attempt to reboot the system, for
example:
task:kworker/0:3 state:D stack:0 pid:662 tgid:662 ppid:2 flags:0x00004000
Workqueue: usb_hub_wq hub_event
Call Trace:
__schedule+0xe22/0xeb6
schedule_timeout+0xe7/0x132
__wait_for_common+0xb5/0x12e
usb_start_wait_urb+0xc5/0x1ef
? usb_alloc_urb+0x95/0xa4
usb_control_msg+0xff/0x184
_usbctrl_vendorreq_sync+0xa0/0x161
_usb_read_sync+0xb3/0xc5
read_efuse_byte+0x13c/0x146
read_efuse+0x351/0x5f0
efuse_read_all_map+0x42/0x52
rtl_efuse_shadow_map_update+0x60/0xef
rtl_get_hwinfo+0x5d/0x1c2
rtl92cu_read_eeprom_info+0x10a/0x8d5
? rtl92c_read_chip_version+0x14f/0x17e
rtl_usb_probe+0x323/0x851
usb_probe_interface+0x278/0x34b
really_probe+0x202/0x4a4
__driver_probe_device+0x166/0x1b2
driver_probe_device+0x2f/0xd8
[...]
We propose hereby to drastically reduce the attempts of doing the I/O
reads in case of failures, restricted to USB devices (given that
they're inherently slower than PCIe ones). By retrying up to 10 times
(instead of 10000), we got reponsiveness in the reproducer, while seems
reasonable to believe that there's no sane USB device implementation in
the field requiring this amount of retries at every I/O read in order
to properly work. Based on that assumption, it'd be good to have it
backported to stable but maybe not since driver implementation (the 10k
number comes from day 0), perhaps up to 6.x series makes sense.
[0] Commit 15fffc6a5624 ("driver core: Fix uevent_show() vs driver detach race")
[1] A note about that: this syzkaller report presents multiple reproducers
that differs by the type of emulated USB device. For this specific case,
check the entry from 2024/08/08 06:23 in the list of crashes; the C repro
is available at https://syzkaller.appspot.com/text?tag=ReproC&x=1521fc83980000.
Cc: stable@vger.kernel.org # v6.1+
Reported-by: syzbot+edd9fe0d3a65b14588d5@syzkaller.appspotmail.com
Tested-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241101193412.1390391-1-gpiccoli@igalia.com
|
|
These are older Wifi 5 chips. RTL8821AU is 1x1, with or without
Bluetooth. RTL8812AU is 2x2, without Bluetooth.
Beamforming is not implemented. It looks like these chips need a
different implementation than what is in bf.c.
Speed tests with RTL8821AU: 137 Mbps download, 144 Mbps upload.
Speed tests with RTL8812AU: 344 Mbps download, 387 Mbps upload.
Station mode and AP mode were tested.
Bluetooth coexistence works. I used my Bluetooth headphones for
several days, listening to music and watching videos. There is only
a problem with the wifi speeds with one router:
With ISP's HG6544C router:
Official driver: 3/5 Mbps.
rtw88: a bit more, but not steady at all. Not enough to watch a 1080p
Youtube video.
With my D-Link Eagle R32 router running Openwrt, on the same channel:
Official driver: 6/10 Mbps.
rtw88: download starts around 30, climbs to 50 / upload is 10 Mbps.
I can watch a 1080p Youtube video.
The music doesn't cut out during any speed tests.
I also tested transferring files to and from my phone. I don't have
other types of Bluetooth devices to test.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/0b8e8093-8103-4999-86bf-0055ec52ea64@gmail.com
|
|
These are the entry points for the new modules rtw88_8821au
(RTL8821AU/RTL8811AU) and rtw88_8812au (RTL8812AU).
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/91c495f8-a607-429b-8bc0-5a45d3c1393e@gmail.com
|
|
These contain code specific to RTL8812AU.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/a0057683-79eb-4ab2-8f74-11a3bc58adfb@gmail.com
|
|
These contain code specific to RTL8821AU.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/37218648-ada7-4fad-b7bd-d2aee28cefb9@gmail.com
|
|
These contain code shared by both RTL8821AU and RTL8812AU chips.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/b8590382-a954-412d-a96b-63e360b97acc@gmail.com
|
|
These contain various arrays for initialising RTL8821AU. Also TX power
limits.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/087c7260-fcc3-4e22-886b-ac477cad9198@gmail.com
|
|
These contain various arrays for initialising RTL8812AU. Also TX power
limits.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/086f476c-e832-4867-963c-a64a63252fd6@gmail.com
|
|
If WiFi operation channel & scan channel both at 2.4GHz, original will keep
going at WL > BT priority table for a long time. It makes A2DP can not sent
audio data to SUT device in time then performed a lag audio. Assign
a BT > WL priority table when A2DP exist, to avoid the issue.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241031023032.7102-1-pkshih@realtek.com
|
|
Set the RF mode from 0xA(low power mode) to 0x3(Normal mode) to avoid
abnormal TX waveform in OFDM rate. Originally the RF mode will be changed
to normal mode by the firmware after entering LPS once. Therefore, this
change does not affect power saving.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241030091603.6073-1-pkshih@realtek.com
|
|
kmalloc may fail, return value might be NULL and will cause
NULL pointer dereference. Add check NULL return of kmalloc in
btc_fw_set_monreg().
Signed-off-by: Pei Xiao <xiaopei01@kylinos.cn>
Fixes: b952cb0a6e2d ("wifi: rtw89: coex: Add register monitor report v7 format")
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/516a91f3997534f708af43c7592cbafdd53dd599.1730253508.git.xiaopei01@kylinos.cn
|
|
OP1dB stands for Output 1dB Compression Point. At this point, the power
amplifier starts to enter the saturation region, resulting in distortion.
The configuration of OP1dB can optimize the RX gain saturation region,
improving RX throughput from 573 to 675 Mbps.
Signed-off-by: Kuan-Chung Chen <damon.chen@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241030022903.13243-1-pkshih@realtek.com
|
|
The initial CMAC/DMAC tables used by WiFi 6 chips are not needed to be
called for firmware secure boot. Otherwise, it causes firmware abnormal
and throw warnings.
rtw89_8852be 0000:03:00.0: FW status = 0x1400
rtw89_8852be 0000:03:00.0: FW BADADDR = 0xb872f800
rtw89_8852be 0000:03:00.0: FW EPC/RA = 0xb89333b7
rtw89_8852be 0000:03:00.0: FW MISC = 0x0
rtw89_8852be 0000:03:00.0: R_AX_HALT_C2H = 0x10002010
rtw89_8852be 0000:03:00.0: R_AX_SER_DBG_INFO = 0x0
rtw89_8852be 0000:03:00.0: [ERR]fw PC = 0xb89a2c97
rtw89_8852be 0000:03:00.0: [ERR]fw PC = 0xb89a2c95
rtw89_8852be 0000:03:00.0: [ERR]fw PC = 0xb89a2c99
rtw89_8852be 0000:03:00.0: [ERR]fw PC = 0xb89a2c9b
rtw89_8852be 0000:03:00.0: [ERR]fw PC = 0xb89a2c9f
rtw89_8852be 0000:03:00.0: [ERR]fw PC = 0xb89a2c9b
rtw89_8852be 0000:03:00.0: [ERR]fw PC = 0xb89a2c99
rtw89_8852be 0000:03:00.0: [ERR]fw PC = 0xb89a2c9d
rtw89_8852be 0000:03:00.0: [ERR]fw PC = 0xb89a2c97
rtw89_8852be 0000:03:00.0: [ERR]fw PC = 0xb89a2c97
rtw89_8852be 0000:03:00.0: [ERR]fw PC = 0xb89a2c97
rtw89_8852be 0000:03:00.0: [ERR]fw PC = 0xb89a2c99
rtw89_8852be 0000:03:00.0: [ERR]fw PC = 0xb89a2c97
rtw89_8852be 0000:03:00.0: [ERR]fw PC = 0xb89a2c9f
rtw89_8852be 0000:03:00.0: [ERR]fw PC = 0xb89a2c99
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241030022135.11688-9-pkshih@realtek.com
|
|
The MSSC (multiple security section count) can be regular number (shown in
below figure) or 0xFF (supported already). For WiFi 7 or newer WiFi 6
chips, the MSSC will be 0xFF. But early WiFi 6 chip such as RTL8852B
could be either one of the cases.
Extend __parse_security_section() to support both with/without secure
boot mode accordingly.
+---------------------------+ -\
| firmware header | |
| | |
| +-----------------------+ | |
| | section type/size * N | | |
| +-----------------------+ | |
+---------------------------+ -/
: :
+---------------------------+ -\
| secure section type (ID:9)| |
| | |
+----|-> [ security key data ] | |
| +---------------------------+ -/
| |MSS Pool for above section |
| | [ security key data 1 ] |
+----|- [ security key data 2 ] |
by mss_idx | [ security key data 3 ] |
| ... M | * M = MSSC (MSSC != 0xFF)
+---------------------------+
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241030022135.11688-8-pkshih@realtek.com
|
|
The security section can be a common parser for v0 and v1 format of
firmware header, so move retrieval code of v1 MSSC from the function, and
then sharing becomes possible.
Not logic change at all.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241030022135.11688-7-pkshih@realtek.com
|
|
For WiFi 6 chips, firmware secure boot will run on a IDMEM mode specified
in firmware header. Retrieve the mode from firmware, and set to registers
accordingly.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241030022135.11688-6-pkshih@realtek.com
|
|
For RTL8852B, when current firmware is secure boot, the security section
needs a special treatment that shrink its size to 960.
As figure below, not only shrink the amount of download size of security
section (2), but also need to modify the section size in firmware header
(1) that is also downloaded to chip.
+---------------------------+
| firmware header |
| |
| +-----------------------+ |
| | section type, size N -|-|-------+
| | ... (1) | | |
| +-----------------------+ | |
+---------------------------+ | 2048 shrink to 960
: : |
+---------------------------+ -\ |
| security section type 9 | | |
| (2) | | <--+
| | |
+---------------------------+ -/
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241030022135.11688-5-pkshih@realtek.com
|
|
WiFi 6 chips could program secure information in v0 or v1 format. Use
existing v1 parser or newly added v0 parser to recognize firmware key
that is going to be used.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241030022135.11688-4-pkshih@realtek.com
|
|
The WiFi 6 chip use the same firmware MSS information v1 read from efuse,
so move this logic to common.
No change logic at all.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241030022135.11688-3-pkshih@realtek.com
|
|
The secure key used by certain hardware module is programmed in efuse, so
driver should read the information from efuse before downloading firmware.
Originally only RTL8922AE can support firmware secure boot, and read efuse
during chip power on. To extend to support all chips, move the caller to
common power on flow and add separate functions to read efuse for
WiFi 6 chips.
No logic change at all.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241030022135.11688-2-pkshih@realtek.com
|
|
Set pause_data to all of the scan channels, excluding the OP channel,
to prevent data frame transmission to the scan channels, which causes
retransmission. Additionally, this flag won't affect the transmission
of probe requests from the scan channels.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241026022143.7304-1-pkshih@realtek.com
|
